[vid=0x081F,pid=0xE401] // here we need to provide the vid/pid of the controller
//At first we set the dpad mode. This controller uses 2 bytes. One byte is for up(0x00)/down(0xFF) and the other for left(0x00)/right(0xFF).
DPAD_MODE =                     DPAD_Absolute_2Values

//                              byte-position / value

//Set dpad values. The values you need to set depend on the dpad mode.
VPAD_BUTTON_DPAD_ABS_UP =       0x01,           0x00
VPAD_BUTTON_DPAD_ABS_DOWN =     0x01,           0xFF
VPAD_BUTTON_DPAD_ABS_LEFT =     0x00,           0x00
VPAD_BUTTON_DPAD_ABS_RIGHT =    0x00,           0xFF

//Set normal buttons
VPAD_BUTTON_A =                 0x05,           0x20
VPAD_BUTTON_B =                 0x05,           0x40
VPAD_BUTTON_X =                 0x05,           0x10
VPAD_BUTTON_Y =                 0x05,           0x80
VPAD_BUTTON_MINUS =             0x06,           0x10
VPAD_BUTTON_PLUS =              0x06,           0x20

//We only have 1 trigger on each side, lets always trigger both.
VPAD_BUTTON_R =                 0x06,           0x02
VPAD_BUTTON_ZR =                0x06,           0x02
VPAD_BUTTON_L =                 0x06,           0x01
VPAD_BUTTON_ZL =                0x06,           0x01