Erase

Erasing with the Eraser tool removes strokes and fills.

Quickly delete everything on the Stage

 Double-click the Eraser tool .

Remove stroke segments or filled areas

  1. Select the Eraser tool, and then click the Faucet modifier .
  2. Click the stroke segment or filled area to delete.

Erase by dragging

  1. Select the Eraser tool.
  2. Click the Eraser Mode modifier and select an erasing mode:
    Erase Normal

    Erases strokes and fills on the same layer.
    Erase Fills

    Erases only fills; strokes are not affected.
    Erase Lines

    Erases only strokes; fills are not affected.
    Erase Selected Fills

    Erases only the currently selected fills and does not affect strokes, selected or not. (Select the fills to erase before using the Eraser tool in this mode.)
    Erase Inside

    Erases only the fill on which you begin the eraser stroke. If you begin erasing from an empty point, nothing is erased. Strokes are unaffected by the eraser in this mode.
  3. Click the Eraser Shape modifier and select an eraser shape and size. Make sure that the Faucet modifier is not selected.
  4. Drag on the Stage.

  This page on the Web