<?xml version="1.0" encoding="UTF-8"?>
<configuration xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="config.xsd">
	<parameters>
		<logging>
			<!--LogLevel values: 0-Disabled, 1-Errors, 2-Warnings, 3-all messages	-->
			<LogLevel value="1"/>
			<!--Don't change the LogMask if you have no idea what does it mean!-->
			<LogMask value="0x8fffffff"/>
		</logging>
		<connections>
			<!--Port number for iSCSI connectons-->
			<Port value="3260"/>
			<!--Interface to listen to. "0.0.0.0" corresponds to "listen to all interfaces".-->
			<Interface value="0.0.0.0"/>
		</connections>
		<authentication>
			<!--Username and password used for the control connection.-->
			<Login value="test"/>
			<Password value="##CY9rzUYh03PK3k6DJie09g=="/>

			<!--CHAP authentification for control connections-->
			<!--
			<CtlAuthMode value="chap"/>
			<CtlAuthServerName value="srv"/>
			<CtlAuthServerSecret value="123"/>
			<CtlAuthClientName value="user"/>
			<CtlAuthClientSecret value="345"/>
			-->
		</authentication>
		<options>
			<!--Minimal 'maximum transfer length' should be supported by all SPTI devices-->
			<MinBufferSize value="65536"/>

			<!--Minimal' aligment mask for SPTI devices - all buffers passed to SPTI will 
			be aligned according to this mask at least. Sure if an adapter requests 
		        bigger aligment target will supply correctly aligmned buffers.	-->
			<AlignmentMask value="0x0000"/>

			<!--Length of iSCSI queue. (min 16, max 512)-->
			<MaxPendingRequests value="64"/>

			<!--Global target id name-->
			<DefTargetName value="iqn.2003-06.com.rocketdivision.swl:$(host).$(symid)"/>

			<!--Setting value of AllowOnlyRecordableCd to 'yes' forces the target to filter out all but 
			recordable CD/DVD.-->
			<AllowOnlyRecordableCd value="no"/>

			<!--Auto Export some of the found Devices-->
			<!--<AutoExportDevices value="spti:cd/dvd"/>-->

			<!--Devices are autoexported as read/write by default.
			Set value of AutoConfigMode to "ro" to allow only readonly access to all the devices-->
			<!--<AutoExportMode value="ro"/>-->

			<!--<iSnsServer value="127.0.0.1:3205"/>-->
		</options>
	</parameters>

	<plugins>
	</plugins>

	<devices>
		<!--SPTI-specific device parameters (optional)
		timeout="nnn"  - SCSI command execution timeout (in seconds). Default is 108000 (30 hours).#  
		share="rw|r" - to allow multiple initiators to access the device (shared mode)
		sessions="nnn" - set maximum number of initiators allowed to mount the device in shared mode
		readonly="no|yes" - to export hard drives in readonly mode-->
		<!--	CD-ROM accessible through SPTI -->
		<!-- <device name="\\.\F:" timeout="256" share="rw" sessions="8"/> -->
	</devices>

	<permissions>
	</permissions>

</configuration>
