<?xml version="1.0" encoding="utf-8"?><Resource>
	<label commandName="AGDExportingOperationName" devLabel="Processing the outcome - %1%" translation="正在处理结果 - %1%"/>
	<label commandName="AGDJobScheduleCloudSolve" devLabel="Scheduling job." translation="正在安排作业。"/>
	<label commandName="AGDJobScheduledCloudSolve" devLabel="Generate started successfully." translation="已成功启动生成。"/>
	<label commandName="AGDOutcomExportMonitorJobNoJobID" devLabel="This job cannot be monitored:  it is missing the job id!" translation="无法监视此作业: 缺少作业 ID！"/>
	<label commandName="AGDOutcomExportMonitorJobNoName" devLabel="This job cannot be monitored:  it is missing the outcome name!" translation="无法监视此作业: 缺少结果名称！"/>
	<label commandName="AGDOutcomExportMonitorJobNoOutcomeID" devLabel="This job cannot be monitored:  it is missing the outcome ID!" translation="无法监视此作业: 缺少结果 ID！"/>
	<label commandName="AGDOutcomExportMonitorJobNoProblemDefinitionID" devLabel="This job cannot be monitored:  it is missing the problem definition id!" translation="无法监视此作业: 缺少问题定义 ID！"/>
	<label commandName="AGDOutcomExportMonitorJobNoStatus" devLabel="This job cannot be monitored:  it is missing the status!" translation="无法监视此作业: 缺少状态！"/>
	<label commandName="AGDOutcomExportMonitorJobNoStudyID" devLabel="This job cannot be monitored:  it is missing the study ID!" translation="无法监视此作业: 缺少分析 ID！"/>
	<label commandName="AGDOutcomExportMonitorJobUnknownKind" devLabel="This job cannot be monitored:  it is missing the job kind!" translation="无法监视此作业: 缺少作业类型！"/>
	<label commandName="AGDOutcomExportMonitorResultNoObjectId" devLabel="This job cannot be monitored:  it is missing results object id!" translation="无法监视此作业: 缺少结果对象 ID！"/>
	<label commandName="AGDOutcomeExportMonitorJobStarted" devLabel="Outcome export started successfully." translation="结果导出已成功启动。"/>
	<label commandName="BrowserMeshRefinementsLabel" devLabel="Local Mesh Controls" translation="局部网格控制"/>
	<label commandName="Sim1stPrincipalStress" devLabel="1st Principal Stress" translation="第一主应力"/>
	<label commandName="Sim3rdPrincipalStress" devLabel="3rd Principal Stress" translation="第三主应力"/>
	<label commandName="SimActualTimeOutputInterval" devLabel="Actual Time" translation="实际时间"/>
	<label commandName="SimAdditionalIterationVectorsAfterConvergence" devLabel="Additional Iteration Vectors After Convergence" translation="收敛之后的其他迭代向量"/>
	<label commandName="SimAdditionalIterationsAfterConvergence" devLabel="Additional Iterations After Convergence" translation="收敛之后的其他迭代"/>
	<label commandName="SimAgdJobErrorCanNotReachObjectives" devLabel="Can't reach the objectives within the allowed iteration limit.&#xA;&#xA;The loads are probably too large or the material strength is insufficient.&#xA;&#xA;Try modifying the study setup." translation="无法在允许的迭代限制内达到目标。&#xA;&#xA;载荷可能太大或材料强度不够。&#xA;&#xA;请尝试修改分析设置。"/>
	<label commandName="SimAgdJobErrorGenerationFailedNoJobID" devLabel="Fusion encountered a problem and failed to complete the outcome generation.&#xA;&#xA;Contact technical support to diagnose and solve this problem." translation="Fusion 遇到了问题，无法完成结果生成。&#xA;&#xA;请与技术支持人员联系以诊断并解决此问题。"/>
	<label commandName="SimAgdJobErrorLoadNotSupported" devLabel="Can't generate outcomes.&#xA;&#xA;The study setup includes a load type that isn't supported by the solver.&#xA;&#xA;Modify the study setup." translation="无法生成结果。&#xA;&#xA;此分析设置包含求解器不支持的载荷类型。&#xA;&#xA;请修改分析设置。"/>
	<label commandName="SimAgdJobErrorLoadsConstraintsOneBody" devLabel="Can't generate outcomes.&#xA;&#xA;The loads and constraints are applied to one body. Apply them to at least two bodies." translation="无法生成结果。&#xA;&#xA;这些载荷和约束应用于一个实体。请将其至少应用于两个实体。"/>
	<label commandName="SimAgdJobErrorLoadsTooLarge" devLabel="Can't generate outcomes.&#xA;&#xA;The loads are too large. Reduce the load magnitude." translation="无法生成结果。&#xA;&#xA;这些载荷太大。请减小载荷大小。"/>
	<label commandName="SimAgdJobErrorSeparateGeometry" devLabel="One or more geometry regions have separated because they are not load bearing.&#xA;&#xA;The last iteration before separation displays in the Explore tab.&#xA;&#xA;The loads are probably too low or the material strength is too high.&#xA;&#xA;Try modifying the study setup." translation="一个或多个几何图元区域已分离，因为它们未承受载荷。&#xA;&#xA;分离之前的最后一次迭代将显示在“浏览”选项卡中。&#xA;&#xA;这些载荷可能太小或材料强度太大。&#xA;&#xA;请尝试修改分析设置。"/>
	<label commandName="SimAgdJobErrorStartingShapeDisconnected" devLabel="The initial shape is divided into two or more parts by the obstacle geometry.&#xA;&#xA;The obstacle geometry may be too large. Consider redefining it." translation="初始形状被障碍物几何图元划分为两个或更多部分。&#xA;&#xA;该障碍物几何图元可能太大。请考虑重新定义它。"/>
	<label commandName="SimAgdPostProcessingJobErrorGenerationFailed" devLabel="Generative Design encountered a problem and failed to complete exporting the outcome.&#xA;&#xA;Contact technical support to diagnose and solve this problem." translation="衍生式设计遇到了问题，无法完成结果导出。&#xA;&#xA;请联系技术支持以诊断并解决此问题。"/>
	<label commandName="SimAssemblyMeshing" devLabel="Assembly meshing." translation="部件网格化。"/>
	<label commandName="SimBadFilletWeldBead" devLabel="Bad fillet or weld or bead." translation="圆角、焊缝或焊道无效。"/>
	<label commandName="SimBodyTooThin" devLabel="Body is too thin." translation="实体太薄。"/>
	<label commandName="SimBucklingGeneralSettingsNumberOfModes" devLabel="Number of Modes" translation="模式数"/>
	<label commandName="SimBucklingMode" devLabel="Buckling Mode" translation="屈曲模式"/>
	<label commandName="SimCalcOptStressThreshold" devLabel="Stress Threshold Set at" translation="应力阈值设置为"/>
	<label commandName="SimCalcOptTopStressPercent" devLabel="Analyze the Top Percentage of Model Stress" translation="分析模型应力的最高百分比"/>
	<label commandName="SimCallAnalysisSpecificContacts" devLabel="Click here to generate 'Contact pairs'." translation="单击此处以生成“接触对”。"/>
	<label commandName="SimCallAutoContacts" devLabel="Click here to select 'Automatic Contacts'." translation="单击此处以选择“自动接触”。"/>
	<label commandName="SimCallManualContact" devLabel="Click here to select 'Manual Contact'." translation="单击此处以选择“手动接触”。"/>
	<label commandName="SimCallMesh" devLabel="Click here to select 'Generate Mesh'." translation="单击此处以选择“生成网格”。"/>
	<label commandName="SimCallSolve" devLabel="Click here to select 'Solve'." translation="单击此处以选择“求解”。"/>
	<label commandName="SimCaseMissing" devLabel="Study is missing" translation="缺少分析"/>
	<label commandName="SimCaseNameFatigue" devLabel="Study %1% - Fatigue" translation="分析 %1% - 疲劳"/>
	<label commandName="SimCaseNotSpecified" devLabel="No simulation study is specified" translation="未指定仿真分析"/>
	<label commandName="SimCommandUnitSystemName" devLabel="Override Unit System" translation="替代单位制"/>
	<label commandName="SimComputePreloadedModes" devLabel="Compute Preloaded Modes" translation="计算预载模式"/>
	<label commandName="SimContactForceResult" devLabel="Contact Force" translation="接触力"/>
	<label commandName="SimContactManualPrefix" devLabel="[M] " translation="[M] "/>
	<label commandName="SimContactOffsetBonded" devLabel="Offset Bonded" translation="偏移粘合"/>
	<label commandName="SimContactPressureResult" devLabel="Contact Pressure" translation="接触压力"/>
	<label commandName="SimContactRBE3" devLabel="RBE3" translation="RBE3"/>
	<label commandName="SimContactRough" devLabel="Rough" translation="粗糙"/>
	<label commandName="SimContactSeparation" devLabel="Separation" translation="分离"/>
	<label commandName="SimContactSliding" devLabel="Sliding" translation="滑动"/>
	<label commandName="SimCopyName" devLabel="(Copy %1%) " translation="(复制 %1%) "/>
	<label commandName="SimDampingFreqDependent" devLabel="Frequency Dependent" translation="频率相关"/>
	<label commandName="SimDampingMassFactor" devLabel="Mass Factor" translation="质量系数"/>
	<label commandName="SimDampingStiffnessFactor" devLabel="Stiffness Factor" translation="刚度系数"/>
	<label commandName="SimDampingType" devLabel="Damping Type" translation="阻尼类型"/>
	<label commandName="SimDampingTypeModal" devLabel="Modal" translation="模态"/>
	<label commandName="SimDampingTypeRayleigh" devLabel="Rayleigh" translation="瑞利"/>
	<label commandName="SimDescription" devLabel="Description: %1%" translation="描述: %1%"/>
	<label commandName="SimDisplacementResult" devLabel="Displacement" translation="位移"/>
	<label commandName="SimDoFSolverFailed" devLabel="Cannot solve: No valid bodies found." translation="无法求解: 找不到有效实体。"/>
	<label commandName="SimDomainFrequency" devLabel="Frequency" translation="频率"/>
	<label commandName="SimDomainLoadCase" devLabel="Load Case" translation="载荷工况"/>
	<label commandName="SimDomainLoadMultiplier" devLabel="Load Multiplier" translation="载荷乘子"/>
	<label commandName="SimDomainStep" devLabel="Step" translation="步骤"/>
	<label commandName="SimDomainTime" devLabel="Time" translation="时间"/>
	<label commandName="SimEdgeTopology" devLabel="Edge topology." translation="边的拓扑结构。"/>
	<label commandName="SimEigenvalueConvergenceTolerance" devLabel="Eigenvalue Convergence Tolerance" translation="特征值收敛公差"/>
	<label commandName="SimEigenvectorNormalizingMethod" devLabel="Eigenvector Normalizing Method" translation="特征矢量标准化方法"/>
	<label commandName="SimElementOrderLinear" devLabel="Linear" translation="线性"/>
	<label commandName="SimElementOrderParabolic" devLabel="Parabolic" translation="抛物线型"/>
	<label commandName="SimEmptyContactResults" devLabel="No contacts detected." translation="未检测到接触。"/>
	<label commandName="SimEnhancedAccuracy" devLabel="Enhanced Accuracy" translation="提高的精度"/>
	<label commandName="SimEquivalentStrainResult" devLabel="Equivalent" translation="等效"/>
	<label commandName="SimExcessiveCurvature" devLabel="Excessive curvature." translation="曲率过大。"/>
	<label commandName="SimExplicitAllowElementDelete" devLabel="AllowElementDelete" translation="AllowElementDelete"/>
	<label commandName="SimExplicitDeleteElementsNegVolume" devLabel="DeleteElementsNegVolume" translation="DeleteElementsNegVolume"/>
	<label commandName="SimExplicitElementDeletionCriteriaEffectiveStrainName" devLabel="Effective Strain" translation="有效应变"/>
	<label commandName="SimExplicitElementDeletionCriteriaEqPlasticStrainName" devLabel="Equivalent Plastic Strain" translation="等效塑性应变"/>
	<label commandName="SimExplicitElementDeletionCriteriaNegativeVolumeName" devLabel="Negative Volume" translation="负体积"/>
	<label commandName="SimExplicitElementDeletionCriteriaPrincipalStrainName" devLabel="Principal Strain" translation="主应变"/>
	<label commandName="SimExplicitElementDeletionName" devLabel="Deletion Criteria:" translation="删除标准:"/>
	<label commandName="SimExplicitElementDeletionValue" devLabel="Value" translation="值"/>
	<label commandName="SimExplicitEnableRayleighDamping" devLabel="Rayleigh Damping" translation="瑞利阻尼"/>
	<label commandName="SimExplicitHeartbeatIntervals" devLabel="Solve Status Information Interval (Heartbeat)" translation="求解状态信息间隔(心跳)"/>
	<label commandName="SimExplicitMaximumElementalPrincipalStrain" devLabel="MaximumElementalPrincipalStrain" translation="MaximumElementalPrincipalStrain"/>
	<label commandName="SimExplicitRayleighDampingAlpha" devLabel="Mass Proportional, ALPHA" translation="质量比例，Alpha"/>
	<label commandName="SimExplicitRayleighDampingBeta" devLabel="Stiffness Proportional, BETA" translation="刚度比例，Beta"/>
	<label commandName="SimExplicitRestartTime" devLabel="Restart Time" translation="重新启动时间"/>
	<label commandName="SimExplicitResultsRequestAcceleration" devLabel="Acceleration" translation="加速度"/>
	<label commandName="SimExplicitResultsRequestAppliedLoads" devLabel="Applied Loads" translation="应用载荷"/>
	<label commandName="SimExplicitResultsRequestContactForces" devLabel="Contact Forces" translation="接触力"/>
	<label commandName="SimExplicitResultsRequestDisplacement" devLabel="Displacement" translation="位移"/>
	<label commandName="SimExplicitResultsRequestReactionForces" devLabel="Reaction Forces" translation="反作用力"/>
	<label commandName="SimExplicitResultsRequestStrain" devLabel="Strain" translation="应变"/>
	<label commandName="SimExplicitResultsRequestStress" devLabel="Stress" translation="应力"/>
	<label commandName="SimExplicitResultsRequestVelocity" devLabel="Velocity" translation="速度"/>
	<label commandName="SimExplicitSaveHistoryIntervals" devLabel="Number of History Save Intervals" translation="历史保存间隔数"/>
	<label commandName="SimExplicitSaveRestartIntervals" devLabel="Number of Restart Save Intervals" translation="重新启动保存间隔数"/>
	<label commandName="SimExplicitSolveType" devLabel="Select Dynamic or Quasi-static solution" translation="选择动态或准静态解"/>
	<label commandName="SimExplicitStepNumber" devLabel="Number of Steps" translation="步骤数"/>
	<label commandName="SimExplicitTimestepReductionFactor" devLabel="Time Step Reduction Factor" translation="时间步长折减系数"/>
	<label commandName="SimExplicit_BSCONP_CAPTOL" devLabel="Capture Tolerance" translation="捕获公差"/>
	<label commandName="SimExplicit_BSCONP_MAXAD_Value" devLabel="Maximum Activation Distance" translation="最大激活距离"/>
	<label commandName="SimExplicit_BSCONP_MU" devLabel="Coefficient of Static Friction" translation="静摩擦系数"/>
	<label commandName="SimExplicit_BSCONP_PTYPE_SymmetryFlag" devLabel="Symmetric" translation="对称"/>
	<label commandName="SimExplicit_BSCONP_SFACT" devLabel="Stiffness Factor" translation="刚度系数"/>
	<label commandName="SimExplicit_CONTACTGENERATE_CAPTOL" devLabel="Capture Tolerance" translation="捕获公差"/>
	<label commandName="SimExplicit_CONTACTGENERATE_MAXAD" devLabel="Maximum Activation Distance" translation="最大激活距离"/>
	<label commandName="SimExplicit_CONTACTGENERATE_MU" devLabel="Coefficient of Static Friction" translation="静摩擦系数"/>
	<label commandName="SimExplicit_CONTACTGENERATE_SELF" devLabel="Self Contact" translation="自接触"/>
	<label commandName="SimExplicit_CONTACTGENERATE_SFACT" devLabel="Stiffness Factor" translation="刚度系数"/>
	<label commandName="SimExplictEventDuration" devLabel="Event duration" translation="事件持续时间"/>
	<label commandName="SimExplictEventQuasiSteps" devLabel="Quasi Steps" translation="准步骤"/>
	<label commandName="SimFEACSConstraintUtilsValidatorLostReferenceConstraint" devLabel="Cannot generate: Lost reference to constraint &quot;%1%&quot; in load case &quot;%2%&quot;." translation="无法生成: 丢失对载荷工况“%2%”中的约束“%1%”的参考。"/>
	<label commandName="SimFEACSConstraintUtilsValidatorNoConstraint" devLabel="Cannot generate: Missing constraints in load case &quot;%1%&quot;. Define at least one constraint." translation="无法生成: 载荷工况“%1%”中缺少约束。请定义至少一个约束。"/>
	<label commandName="SimFEACSConstraintUtilsValidatorSickConstraint" devLabel="Cannot generate: Invalid constraint &quot;%1%&quot; in load case &quot;%2%&quot;." translation="无法生成: 载荷工况“%2%”中的约束“%1%”无效。"/>
	<label commandName="SimFEACSConvergenceSettingsAutoRefinementControl" devLabel="Automatic Refinement Control" translation="自动优化控制"/>
	<label commandName="SimFEACSConvergenceSettingsConvergenceThreshHold" devLabel="Convergence Threshold" translation="收敛阈值"/>
	<label commandName="SimFEACSConvergenceSettingsMaxRefinements" devLabel="Maximum Number of Mesh Refinements" translation="网格优化的最大次数"/>
	<label commandName="SimFEACSConvergenceSettingsRefinementThreshHold" devLabel="Portion of Elements to Refine" translation="要优化的元素部分"/>
	<label commandName="SimFEACSConvergenceSettingsTargetResComp" devLabel="Results for Baseline Accuracy" translation="基线精度的结果"/>
	<label commandName="SimFEACSGeneralSettingsContactTolerance" devLabel="Contact Tolerance" translation="接触公差"/>
	<label commandName="SimFEACSGeneralSettingsShellContactTolerance" devLabel="Shell Contact Tolerance" translation="壳体接触公差"/>
	<label commandName="SimFEACSMeshSettingsAbsoluteSize" devLabel="Average Element Size - Absolute Value" translation="平均元素大小 - 绝对值"/>
	<label commandName="SimFEACSMeshSettingsDownloadVolume" devLabel="Generate Solid Mesh during Solve" translation="求解期间生成实体网格"/>
	<label commandName="SimFEACSMeshSettingsEnablePartBased" devLabel="Use Part Based Measure for Assembly Mesh" translation="对部件网格使用基于零件的测量"/>
	<label commandName="SimFEACSMeshSettingsGradingFactor" devLabel="Adjacent Elements Size Ratio" translation="相邻元素尺寸比"/>
	<label commandName="SimFEACSMeshSettingsKeepElementsCurvedAsm" devLabel="Create Curved Mesh Elements" translation="创建弯曲网格元素"/>
	<label commandName="SimFEACSMeshSettingsMaxAspectRatio" devLabel="Max Aspect Ratio" translation="最大纵横比"/>
	<label commandName="SimFEACSMeshSettingsMaxTurnAngle" devLabel="Maximum Element Angle on Curves" translation="曲线上的最大元素角度"/>
	<label commandName="SimFEACSMeshSettingsMinSizeFraction" devLabel="Minimum Element Size" translation="最小元素大小"/>
	<label commandName="SimFEACSMeshSettingsSizeFraction" devLabel="Average Element Size - Solids" translation="平均元素大小 - 实体"/>
	<label commandName="SimFEACSMeshSettingsSizeFraction2D" devLabel="Average Element Size - Shells" translation="平均元素大小 - 壳"/>
	<label commandName="SimFEACSMeshSettingsUseAbsoluteSize" devLabel="Use Absolute Size of Mesh Element" translation="使用绝对网格元素大小"/>
	<label commandName="SimFEACSSolveSettingsMassTarget" devLabel="Mass Target" translation="质量目标"/>
	<label commandName="SimFEACSSolveSettingsTOptIterTolerance" devLabel="Shape Optimization iteration tolerance" translation="形状优化迭代公差"/>
	<label commandName="SimFEACSSolveSettingsTOptPreserveLCEntityBoundaries" devLabel="Topology Optimization Preserve Entities With Loads and Constraints" translation="拓扑优化保留具有载荷和约束的实体"/>
	<label commandName="SimFEACSV2ControllerJobNoDownloadExtractorFailure" devLabel="The model could not be translated for simulation." translation="无法转换模型以进行仿真。"/>
	<label commandName="SimFEACSV2ControllerJobNoDownloadExtractorForwardCompatibilityError" devLabel="The model could not be translated for simulation because it is for a version of Fusion or has schema changes ahead of what the translator is capable of handling." translation="无法转换模型以进行仿真，因为它适用于某个 Fusion 版本，或者在转换器能够处理内容之前具有模式更改。"/>
	<label commandName="SimFEACSV2ControllerJobNoDownloadGCPFailure" devLabel="No data could be downloaded for a failed job." translation="无法下载失败作业的数据。"/>
	<label commandName="SimFEACSV2ControllerJobNoDownloadGCPSuccess" devLabel="No data could be downloaded for a successful job. Close and reopen the document to retry.&#xA;If that does not work, try re-running the job and report the issue to customer support." translation="无法下载成功作业的数据。请关闭并重新打开文档以重试。&#xA;如果该操作不起作用，请尝试重新运行该作业并将问题报告给客户支持。"/>
	<label commandName="SimFEACSV2ControllerJobNoDownloadGCPWackedState" devLabel="No data could be downloaded for this job. Close and reopen the document to retry.&#xA;If that does not work, try re-running the job and report the issue to customer support." translation="无法下载此作业的任何数据。请关闭再重新打开文档以重试。&#xA;如果这不起作用，请尝试重新运行该作业并将问题报告给客户支持人员。"/>
	<label commandName="SimFEACSV2ControllerJobNoDownloadUnknownFailure" devLabel="An unknown error occurred and there are no results available." translation="发生未知错误，没有可用结果。"/>
	<label commandName="SimFEACSV2SolverMessagesBaseMesh" devLabel="Base mesh" translation="基础网格"/>
	<label commandName="SimFEACSV2SolverMessagesExplicitCourantStabilityLimitMask" devLabel="Initial Courant Stability Limit : %1%" translation="初始 Courant 稳定性限制: %1%"/>
	<label commandName="SimFEACSV2SolverMessagesExplicitSolveTimeMask" devLabel="Estimated Solve Time : %1% %2%:%3%:%4% (dd hh::mm::ss)" translation="预计求解时间: %1% %2%:%3%:%4% (dd hh::mm::ss)"/>
	<label commandName="SimFEACSV2SolverMessagesMeshingHRefinement" devLabel="h refinement #%1%" translation="h 优化 #%1%"/>
	<label commandName="SimFEACSV2SolverMessagesMeshingStatisticsMask" devLabel="%1%: %2% nodes, %3% elements" translation="%1%: %2% 个节点、%3% 个元素"/>
	<label commandName="SimFEACSV2SolverMessagesSolverMesh" devLabel="Solver mesh" translation="求解器网格"/>
	<label commandName="SimFEACSV2SolverMessagesUnachievableMassTargetExMask" devLabel="Itâs not possible to reduce the mass to %1$.3f%% of the original mass, as specified in&#xA;             the study setup. The model geometry can only be reduced to %2$.3f%% &#xA;             of the original mass.&#xA;&#xA;Causes: The combination of the shape optimization criteria, mesh size, and preserve&#xA;            regions in the study setup restrict how much the model geometry can be&#xA;            reduced.&#xA;&#xA;Action: If the achievable target mass is close to the specified target mass,&#xA;            try decreasing the mesh size and relaunching the analysis.&#xA;            Otherwise, try&#xA;            - increasing the Target Mass, for example, if you have accepted&#xA;                the default (60%% of original mass), or&#xA;            - unchecking âPreserve Entities with Loads and Constraintsâ in&#xA;                the Shape Optimization Criteria dialog, and then relaunch&#xA;                the analysis.&#xA;" translation="不能将质量减小到原始质量的 %1$.3f%%，如分析&#xA;             设置中所指定。模型几何图元只能减小到原始&#xA;             质量的 %2$.3f%%。&#xA;&#xA;原因: 分析设置中形状优化标准、网格大小和保留区域&#xA;            的组合限制了模型几何图元可以减小&#xA;            的量。&#xA;&#xA;操作: 如果可实现的目标质量接近指定的目标质量，&#xA;            请尝试减小网格大小并重新启动分析。&#xA;            否则，请尝试&#xA;            增加目标质量 - 例如，如果已接受&#xA;                默认值(原始质量的 60%%)，或者&#xA;            取消选中“形状优化标准”对话框中的&#xA;                “保留具有载荷和约束的实体”，然后重新启动&#xA;                分析。&#xA;"/>
	<label commandName="SimFaceBoundary" devLabel="Face boundary." translation="面边界。"/>
	<label commandName="SimFaceInterior" devLabel="Face interior." translation="面内部。"/>
	<label commandName="SimFaceTopology" devLabel="Face topology." translation="面拓扑。"/>
	<label commandName="SimFatigueAnalsysTypeEN" devLabel="Strain based (EN)" translation="基于应变(EN)"/>
	<label commandName="SimFatigueAnalsysTypeSN" devLabel="Stress based (SN)" translation="基于应力(SN)"/>
	<label commandName="SimFatigueCalcOptMaxAbsPrincipal" devLabel="Max Abs Principal" translation="绝对值最大的主应力"/>
	<label commandName="SimFatigueCalcOptMaxShear" devLabel="Max Shear (Tresca)" translation="最大剪切应力(Tresca)"/>
	<label commandName="SimFatigueCalcOptNormalStress" devLabel="Normal Stress (Critical Plane)" translation="法向应力(临界面)"/>
	<label commandName="SimFatigueCalcOptShearStress" devLabel="Shear Stress (Critical Plane)" translation="剪切应力(临界面)"/>
	<label commandName="SimFatigueCalcOptSignedVonMisses" devLabel="Signed VonMises" translation="带符号的 Mises 等效应力"/>
	<label commandName="SimFatigueCalcOptStressOpt" devLabel="Stress Options" translation="应力选项"/>
	<label commandName="SimFatigueCalcTyle" devLabel="fatigue calculation type" translation="疲劳计算类型"/>
	<label commandName="SimFatigueCaseIsMissing" devLabel="Sim Fatigue case is missing" translation="缺少疲劳仿真案例"/>
	<label commandName="SimFatigueCaseLinkError" devLabel="Failed to set input study" translation="无法设置输入分析"/>
	<label commandName="SimFatigueCaseNameFormat" devLabel="Fatigue Case %1%" translation="疲劳案例 %1%"/>
	<label commandName="SimFatigueCaseNotSpecified" devLabel="No Fatigue study is specified" translation="未指定疲劳分析"/>
	<label commandName="SimFatigueCaseSelectionName" devLabel="Fatigue Case" translation="疲劳案例"/>
	<label commandName="SimFatigueCaseType" devLabel="Fatigue Case Type" translation="疲劳案例类型"/>
	<label commandName="SimFatigueCloneParametersNotSpecified" devLabel="No fatigue clone parameters was specified." translation="未指定疲劳克隆参数。"/>
	<label commandName="SimFatigueCreationParametersNotSpecified" devLabel="No fatigue analysis creation parameters was specified." translation="未指定疲劳分析创建参数。"/>
	<label commandName="SimFatigueDamage" devLabel="Fatigue Damage" translation="疲劳损伤"/>
	<label commandName="SimFatigueDamageGerberCorrectionStressBased" devLabel="Gerber Stress Correction (Stress Based)" translation="Gerber 应力修正(基于应力)"/>
	<label commandName="SimFatigueDamageGoodmanCorrectionStressBased" devLabel="Goodman Stress Correction (Stress Based)" translation="Goodman 应力修正(基于应力)"/>
	<label commandName="SimFatigueDamageNoMeanCorrectionStressBased" devLabel="No Mean Stress Correction (Stress Based)" translation="无平均应力修正(基于应力)"/>
	<label commandName="SimFatigueDamageNoMeanStrainCorrectionStrainBased" devLabel="No Mean Stress Correction (Strain Based)" translation="无平均应力修正(基于应变)"/>
	<label commandName="SimFatigueDamageStrainMorrowCorrectionStrainBased" devLabel="Morrow Stress Correction (Strain Based)" translation="Morrow 应力修正(基于应变)"/>
	<label commandName="SimFatigueDamageStrainSWTCorrectionStrainBased" devLabel="Smith-Watson-Topper Stress Correction (Strain Based)" translation="Smith-Watson-Topper 应力修正(基于应变)"/>
	<label commandName="SimFatigueDefaultCycleHistoryWarning" devLabel="The load cycle history is not defined, the default load cycle history will be used in fatigue analysis." translation="未定义载荷循环历史，在疲劳分析中将使用默认载荷循环历史。"/>
	<label commandName="SimFatigueDefaultSurfaceFinishWarning" devLabel="Surface finish is not specified, the default values will be used." translation="未指定表面光洁度，将使用默认值。"/>
	<label commandName="SimFatigueDesiredLife" devLabel="Desired Life (cycles)" translation="期望寿命(循环次数)"/>
	<label commandName="SimFatigueEditParametersNotSpecified" devLabel="No fatigue analysis edit parameters was specified." translation="未指定疲劳分析编辑参数。"/>
	<label commandName="SimFatigueFSFConstMeanFSF" devLabel="Constant Mean (Fatigue Safety Factor)" translation="常数均值(疲劳安全系数)"/>
	<label commandName="SimFatigueFSFConstStressRadioFSF" devLabel="Constant Stress Ratio (Fatigue Safety Factor)" translation="等应力比(疲劳安全系数)"/>
	<label commandName="SimFatigueFSFGoodman" devLabel="Fatigue Safety Factor (Goodman diagram)" translation="疲劳安全系数(Goodman 图)"/>
	<label commandName="SimFatigueFSFHaigh" devLabel="Fatigue Safety Factor (Haigh diagram)" translation="疲劳安全系数(Haigh 图)"/>
	<label commandName="SimFatigueFailedCycleHistory" devLabel="The load cycle history is not defined." translation="未定义载荷循环历史。"/>
	<label commandName="SimFatigueFailedOverrideMaterial" devLabel="Cannot solve: Fatigue material is not specified for some components. Please select a valid material in the Fatigue Materials dialog." translation="无法求解: 没有为某些零部件指定疲劳材料。请在“疲劳材料”对话框中选择有效的材料。"/>
	<label commandName="SimFatigueFailedOverrideMaterialCount" devLabel="Cannot solve: Fatigue material is not specified for the %1% components. Please select a valid material in the Fatigue Materials dialog." translation="无法求解: 没有为 %1% 个零部件指定疲劳材料。请在“疲劳材料”对话框中选择有效材料。"/>
	<label commandName="SimFatigueFailedOverrideMaterialWarning" devLabel="Fatigue material is not specified for the following components. The fatigue analysis will be skipped." translation="没有为以下零部件指定疲劳材料。将跳过疲劳分析。"/>
	<label commandName="SimFatigueFailedOverrideMaterialWarningCount" devLabel="Fatigue material is not specified for the %1% components. The fatigue analysis will be skipped." translation="没有为 %1% 个零部件指定疲劳材料。将跳过疲劳分析。"/>
	<label commandName="SimFatigueFailedSurfaceFinish" devLabel="Surface finish is not specified for the following components, the default values will be used." translation="没有为以下零部件指定表面光洁度，将使用默认值。"/>
	<label commandName="SimFatigueFailedSurfaceFinishCount" devLabel="Surface finish is not specified for the %1% components, the default values will be used." translation="没有为 %1% 个零部件指定表面光洁度，将使用默认值。"/>
	<label commandName="SimFatigueLife" devLabel="Fatigue Life" translation="疲劳寿命"/>
	<label commandName="SimFatigueLifeGoodmanCorrectionStressBased" devLabel="Goodman Stress Correction (Stress Based)" translation="Goodman 应力修正(基于应力)"/>
	<label commandName="SimFatigueLifeNoMeanCorrectionStressBased" devLabel="No Mean Stress Correction (Stress Based)" translation="无平均应力修正(基于应力)"/>
	<label commandName="SimFatigueLifeNoMeanStrainCorrectionStrainBased" devLabel="No Mean Stress Correction (Strain Based)" translation="无平均应力修正(基于应变)"/>
	<label commandName="SimFatigueLifeStrainMorrowCorrectionStrainBased" devLabel="Morrow Stress Correction (Strain Based)" translation="Morrow 应力修正(基于应变)"/>
	<label commandName="SimFatigueLifeStrainSWTCorrectionStrainBased" devLabel="Smith-Watson-Topper Stress Correction (Strain Based)" translation="Smith-Watson-Topper 应力修正(基于应变)"/>
	<label commandName="SimFatigueLinkedCaseValidateError" devLabel="Errors in %1% : input study must be Static Stress or Thermal Stress" translation="%1% 中存在错误: 输入分析必须为静态应力或热应力"/>
	<label commandName="SimFatigueLoadCaseInitError" devLabel="Failed to initiate load case" translation="无法建立载荷案例"/>
	<label commandName="SimFatigueLogLife" devLabel="Fatigue Log10(Life)" translation="疲劳 Log10 (寿命)"/>
	<label commandName="SimFatigueLogLifeGerberCorrectionStressBased" devLabel="Gerber Stress Correction (Stress Based)" translation="Gerber 应力修正(基于应力)"/>
	<label commandName="SimFatigueLogLifeGoodmanCorrectionStressBased" devLabel="Goodman Stress Correction (Stress Based)" translation="Goodman 应力修正(基于应力)"/>
	<label commandName="SimFatigueLogLifeNoMeanCorrectionStressBased" devLabel="No Mean Stress Correction (Stress Based)" translation="无平均应力修正(基于应力)"/>
	<label commandName="SimFatigueLogLifeNoMeanStrainCorrectionStrainBased" devLabel="No Mean Stress Correction (Strain Based)" translation="无平均应力修正(基于应变)"/>
	<label commandName="SimFatigueLogLifeStrainMorrowCorrectionStrainBased" devLabel="Morrow Stress Correction (Strain Based)" translation="Morrow 应力修正(基于应变)"/>
	<label commandName="SimFatigueLogLifeStrainSWTCorrectionStrainBased" devLabel="Smith-Watson-Topper Stress Correction (Strain Based)" translation="Smith-Watson-Topper 应力修正(基于应变)"/>
	<label commandName="SimFatigueMeanStressCorrection" devLabel="Fatigue Mean Stress Corrections" translation="疲劳平均应力修正"/>
	<label commandName="SimFatigueNoLinkedStudy" devLabel="Cannot solve: No input studies" translation="无法求解: 无输入分析"/>
	<label commandName="SimFatigueOptionAvgStressAtNodes" devLabel="Fatigue Option Average Stress at Nodes" translation="疲劳选项节点处的平均应力"/>
	<label commandName="SimFatigueOptionStress" devLabel="Fatigue Option Stress" translation="疲劳选项应力"/>
	<label commandName="SimFatigueOptionStressThreshold" devLabel="Fatigue Option Stress Threshold" translation="疲劳选项应力阈值"/>
	<label commandName="SimFatigueOptionTopStressPercent" devLabel="Fatigue Option Top Stress Percent" translation="疲劳选项最大应力百分比"/>
	<label commandName="SimFatigueOutoutConstMean" devLabel="Constant Mean" translation="常数均值"/>
	<label commandName="SimFatigueOutoutConstStressRatio" devLabel="Constant Stress Ratio" translation="等应力比"/>
	<label commandName="SimFatigueOutoutCycles" devLabel="Cycles to Failure and Damage" translation="疲劳和损坏出现前的循环次数"/>
	<label commandName="SimFatigueOutoutGerberStressCorrection" devLabel="Gerber Correction" translation="Gerber 修正"/>
	<label commandName="SimFatigueOutoutGoodmanStressCorrection" devLabel="Goodman Correction" translation="Goodman 修正"/>
	<label commandName="SimFatigueOutoutMorrowStressCorrection" devLabel="Morrow Correction" translation="Morrow 修正"/>
	<label commandName="SimFatigueOutoutNoStressCorrection" devLabel="No Corrections" translation="无修正"/>
	<label commandName="SimFatigueOutoutSafetyFactor" devLabel="Safety Factor Based on Loads" translation="基于载荷的安全系数"/>
	<label commandName="SimFatigueOutoutSmithWatsonTopperStressCorrection" devLabel="Smith-Watson-Topper Correction" translation="Smith-Watson-Topper 修正"/>
	<label commandName="SimFatigueOutputDesiredLife" devLabel="Fatigue Output Desired Life" translation="疲劳输出期望寿命"/>
	<label commandName="SimFatigueOutputType" devLabel="Fatigue Output Type" translation="疲劳输出类型"/>
	<label commandName="SimFatigueSafetyFactor" devLabel="Fatigue Safety Factor" translation="疲劳安全系数"/>
	<label commandName="SimFatigueSafetyFactorGerberCorrectionStressBased" devLabel="Gerber Stress Correction (Stress Based)" translation="Gerber 应力修正(基于应力)"/>
	<label commandName="SimFatigueSafetyFactorGoodmanCorrectionStressBased" devLabel="Goodman Stress Correction (Stress Based)" translation="Goodman 应力修正(基于应力)"/>
	<label commandName="SimFatigueSafetyFactorNoMeanCorrectionStressBased" devLabel="No Mean Stress Correction (Stress Based)" translation="无平均应力修正(基于应力)"/>
	<label commandName="SimFatigueSafetyFactorNoMeanStrainCorrectionStrainBased" devLabel="No Mean Stress Correction (Strain Based)" translation="无平均应力修正(基于应变)"/>
	<label commandName="SimFatigueSafetyFactorStrainMorrowCorrectionStrainBased" devLabel="Morrow Stress Correction (Strain Based)" translation="Morrow 应力修正(基于应变)"/>
	<label commandName="SimFatigueSafetyFactorStrainSWTCorrectionStrainBased" devLabel="Smith-Watson-Topper Stress Correction (Strain Based)" translation="Smith-Watson-Topper 应力修正(基于应变)"/>
	<label commandName="SimFatigueSurfaceFinishComponent" devLabel="Body" translation="实体"/>
	<label commandName="SimFatigueSurfaceFinishConcentration" devLabel="Stress Concentration Factor Kf(&gt;=1.0)" translation="应力集中系数 Kf(&gt;=1.0)"/>
	<label commandName="SimFatigueSurfaceFinishEndurance" devLabel="Surface Finish Endurance Limit Factor (&lt;=1.0)" translation="表面光洁度疲劳极限系数(&lt;=1.0)"/>
	<label commandName="SimFatigueSurfaceFinishMisc" devLabel="Other Endurance Limit Factors" translation="其他疲劳极限系数"/>
	<label commandName="SimFatigueType" devLabel="Fatigue Analysis Type" translation="疲劳分析类型"/>
	<label commandName="SimFatigueUpdateOutputSettings" devLabel="Failed to update output settings" translation="无法更新输出设置"/>
	<label commandName="SimFirstFlexibleModeNaturalFrequency" devLabel="First Flexible Mode Natural Frequency" translation="第一个柔性模式的固有频率"/>
	<label commandName="SimFirstPrincipalResult" devLabel="1st Principal" translation="第一主应力"/>
	<label commandName="SimFree" devLabel="Free" translation="自由"/>
	<label commandName="SimFreeContact" devLabel="Free" translation="自由"/>
	<label commandName="SimFreqResponseGeneralSettingsConstModalDamping" devLabel="Modal Damping" translation="模态阻尼"/>
	<label commandName="SimFreqResponseGeneralSettingsDampingMassFactor" devLabel="Mass Factor" translation="质量系数"/>
	<label commandName="SimFreqResponseGeneralSettingsDampingStiffnessFactor" devLabel="Stiffness Factor" translation="刚度系数"/>
	<label commandName="SimFrequencyMode" devLabel="Frequency Mode" translation="频率模式"/>
	<label commandName="SimFrequencyRange" devLabel="Frequency Range [Hz]" translation="频率范围 [Hz]"/>
	<label commandName="SimFtgCaseMissing" devLabel="Sim fatigue case is missing" translation="缺少疲劳仿真案例"/>
	<label commandName="SimFtgCombinationMethod" devLabel="Load Case Combination Method" translation="载荷案例组合方法"/>
	<label commandName="SimFtgCombinationMethodCombineAdd" devLabel="Combine &amp; Add" translation="合并并添加"/>
	<label commandName="SimFtgCombinationMethodSequential" devLabel="Sequential" translation="连续"/>
	<label commandName="SimFtgCurveCustom" devLabel="Custom Curve" translation="自定义曲线"/>
	<label commandName="SimFtgCurveSawTooth" devLabel="Triangle Wave" translation="三角波"/>
	<label commandName="SimFtgCurveSawToothHalf" devLabel="Half of Triangle Wave" translation="半三角波"/>
	<label commandName="SimFtgCurveSin" devLabel="Sine Wave" translation="正弦波"/>
	<label commandName="SimFtgCurveSinHalf" devLabel="Half of Sine Wave" translation="半正弦波"/>
	<label commandName="SimFtgCurveSquare" devLabel="Square Wave" translation="方波"/>
	<label commandName="SimFtgCurveSquareHalf" devLabel="Half of Square Wave" translation="半方波"/>
	<label commandName="SimFtgCurveUnknown" devLabel="Unknown" translation="未知"/>
	<label commandName="SimFtgCycleCurveAmplitudeValue" devLabel="Amplitude" translation="幅"/>
	<label commandName="SimFtgCycleCurveOffsetValue" devLabel="Mean" translation="平均值"/>
	<label commandName="SimFtgCycleCurveType" devLabel="Cycle Curve Type" translation="循环曲线类型"/>
	<label commandName="SimFtgCycleFor" devLabel="Fatigue Cycle for %1%" translation="%1% 的疲劳周期"/>
	<label commandName="SimFtgDamageGerberCorrection" devLabel="Gerber Stress Correction" translation="Gerber 应力修正"/>
	<label commandName="SimFtgDamageGoodmanCorrection" devLabel="Goodman Stress Correction" translation="Goodman 应力修正"/>
	<label commandName="SimFtgDamageNoMeanCorrection" devLabel="No Mean Stress Correction" translation="无平均应力修正"/>
	<label commandName="SimFtgDamageNoMeanStrainCorrection" devLabel="No Mean Stress Correction" translation="无平均应力修正"/>
	<label commandName="SimFtgDamageStrainMorrowCorrection" devLabel="Morrow Stress Correction" translation="Morrow 应力修正"/>
	<label commandName="SimFtgDamageStrainSWTCorrection" devLabel="Smith-Watson-Topper Stress Correction" translation="Smith-Watson-Topper 应力修正"/>
	<label commandName="SimFtgFSFConstMean" devLabel="Constant Mean" translation="常数均值"/>
	<label commandName="SimFtgFSFConstStressRadio" devLabel="Constant Stress Ratio" translation="等应力比"/>
	<label commandName="SimFtgLifeGerberStressCorrection" devLabel="Gerber Stress Correction" translation="Gerber 应力修正"/>
	<label commandName="SimFtgLifeGoodmanCorrection" devLabel="Goodman Stress Correction" translation="Goodman 应力修正"/>
	<label commandName="SimFtgLifeNoMeanCorrection" devLabel="No Mean Stress Correction" translation="无平均应力修正"/>
	<label commandName="SimFtgLifeNoMeanStrainCorrection" devLabel="No Mean Stress Correction" translation="无平均应力修正"/>
	<label commandName="SimFtgLifeStrainMorrowCorrection" devLabel="Morrow Stress Correction" translation="Morrow 应力修正"/>
	<label commandName="SimFtgLifeStrainSWTCorrection" devLabel="Smith-Watson-Topper Stress Correction" translation="Smith-Watson-Topper 应力修正"/>
	<label commandName="SimFtgLinkDlgErrDifferentModel" devLabel="The selected input Studies must share the same model." translation="选定的输入分析必须共享相同模型。"/>
	<label commandName="SimFtgLoadCycleSequence" devLabel="Load Cycle Sequence" translation="载荷循环序列"/>
	<label commandName="SimFtgLoadCycles" devLabel="# Cycles" translation="循环次数"/>
	<label commandName="SimFtgLoadHistoryX" devLabel="Load History %1%" translation="载荷历史 %1%"/>
	<label commandName="SimFtgLogLifeGerberCorrection" devLabel="Gerber Stress Correction" translation="Gerber 应力修正"/>
	<label commandName="SimFtgLogLifeGoodmanCorrection" devLabel="Goodman Stress Correction" translation="Goodman 应力修正"/>
	<label commandName="SimFtgLogLifeNoMeanCorrection" devLabel="No Mean Stress Correction" translation="无平均应力修正"/>
	<label commandName="SimFtgLogLifeNoMeanStrainCorrection" devLabel="No Mean Stress Correction" translation="无平均应力修正"/>
	<label commandName="SimFtgLogLifeStrainMorrowCorrection" devLabel="Morrow Stress Correction" translation="Morrow 应力修正"/>
	<label commandName="SimFtgLogLifeStrainSWTCorrection" devLabel="Smith-Watson-Topper Stress Correction" translation="Smith-Watson-Topper 应力修正"/>
	<label commandName="SimFtgSafetyFactorGerberCorrection" devLabel="Gerber Stress Correction" translation="Gerber 应力修正"/>
	<label commandName="SimFtgSafetyFactorGoodmanCorrection" devLabel="Goodman Stress Correction" translation="Goodman 应力修正"/>
	<label commandName="SimFtgSafetyFactorNoMeanCorrection" devLabel="No Mean Stress Correction" translation="无平均应力修正"/>
	<label commandName="SimFtgSafetyFactorNoMeanStrainCorrection" devLabel="No Mean Stress Correction" translation="无平均应力修正"/>
	<label commandName="SimFtgSafetyFactorStrainMorrowCorrection" devLabel="Morrow Stress Correction" translation="Morrow 应力修正"/>
	<label commandName="SimFtgSafetyFactorStrainSWTCorrection" devLabel="Smith-Watson-Topper Stress Correction" translation="Smith-Watson-Topper 应力修正"/>
	<label commandName="SimFtgSurfaceFinishCustom" devLabel="Custom" translation="自定义"/>
	<label commandName="SimFtgSurfaceFinishForged" devLabel="Forged" translation="锻造"/>
	<label commandName="SimFtgSurfaceFinishGround" devLabel="Ground" translation="地面"/>
	<label commandName="SimFtgSurfaceFinishMachined" devLabel="Machined" translation="已加工"/>
	<label commandName="SimFtgSurfaceFinishPolished" devLabel="Polished" translation="抛光"/>
	<label commandName="SimFtgSurfaceFinishRolled" devLabel="Rolled" translation="轧制"/>
	<label commandName="SimFullyFixed" devLabel="Fully Fixed" translation="完全固定"/>
	<label commandName="SimFullyUnconstrainedGroups" devLabel="Warning: Model contains %1% fully unconstrained group(s) in load case &quot;%2%&quot;." translation="警告: 模型包含载荷工况“%2%”中 %1% 个完全不受约束的组。"/>
	<label commandName="SimFullyUnconstrainedGroupsError" devLabel="Error: Model contains %1% fully unconstrained group(s) in load case &quot;%2%&quot;." translation="错误: 模型包含载荷工况“%2%”中 %1% 个完全不受约束的组。"/>
	<label commandName="SimFullyUnconstrainedGroupsWarning" devLabel="Warning: Model contains %1% fully unconstrained group(s) in load case &quot;%2%&quot;." translation="警告: 模型包含载荷工况“%2%”中 %1% 个完全不受约束的组。"/>
	<label commandName="SimGenConstraintAlongWithInertialRelief" devLabel="You have chosen to remove rigid body modes, yet there are 1 or more constraints in the model. Please double check your boundry conditions to ensure they are setup correctly." translation="您已选择删除刚体模态，但模型中仍有 1 个或多个约束。请仔细检查边界条件以确保它们已正确设置。"/>
	<label commandName="SimGenFluidOnlyStructuralBCExists" devLabel="Warning: Structural loads or constraints are defined in load case &quot;%1%&quot;.Structural loads or constraints are not supported by Minimize Pressure Drop objective." translation="警告: 在载荷工况“%1%”中定义结构载荷或约束。“最小化压降”目标不支持结构载荷或约束。"/>
	<label commandName="SimGenNoFullFix" devLabel="Not all directions are fixed for load case &quot;%1%&quot;. The model may not be stable. Correct your constraint settings." translation="载荷工况“%1%”的所有方向并未全部固定。模型可能不稳定。请调整您的约束设置。"/>
	<label commandName="SimGeneralSettingsRemoveRigidBodyModes" devLabel="Remove Rigid Body Modes" translation="删除刚体模态"/>
	<label commandName="SimGenerativeAbortedNotOnline" devLabel="Generative job(s) aborted:  Fusion is not online.  Please try this again after Fusion resumes its online connection." translation="衍生式作业已中止: Fusion 处于脱机状态。请在 Fusion 恢复其联机连接后重试。"/>
	<label commandName="SimGenerativeAdditiveMethodGroup" devLabel="Additive" translation="增材"/>
	<label commandName="SimGenerativeAllMethodssGroup" devLabel="All methods" translation="所有方法"/>
	<label commandName="SimGenerativeAlternativeOutcomes" devLabel="Alternative Outcomes" translation="替代结果"/>
	<label commandName="SimGenerativeCuttingMethodGroup" devLabel="2-axis Cutting" translation="2 轴切削"/>
	<label commandName="SimGenerativeDieCastingMethodGroup" devLabel="Casting" translation="铸造"/>
	<label commandName="SimGenerativeDisconnectionFilter" devLabel="Disconnection Filter" translation="断开滤波器"/>
	<label commandName="SimGenerativeInertialRelief" devLabel="Inertial Relief" translation="惯性释压"/>
	<label commandName="SimGenerativeMaterialReductionOnly" devLabel="Material Reduction Only" translation="仅材料减少"/>
	<label commandName="SimGenerativeMillingMethodGroup" devLabel="Milling" translation="铣削"/>
	<label commandName="SimGenerativeResolution" devLabel="Resolution" translation="分辨率"/>
	<label commandName="SimGenerativeResolutionType" devLabel="Resolution Type" translation="分辨率类型"/>
	<label commandName="SimGenerativeUnrestrictedMethodGroup" devLabel="Unrestricted" translation="无限制"/>
	<label commandName="SimGeometryError" devLabel="Geometry error." translation="几何图元错误。"/>
	<label commandName="SimGerberStressCorrectionStressBased" devLabel="Gerber Stress Correction (Stress Based)" translation="Gerber 应力修正(基于应力)"/>
	<label commandName="SimHeatFlux" devLabel="Heat Flux" translation="热通量"/>
	<label commandName="SimHeatFluxResult" devLabel="Heat Flux" translation="热通量"/>
	<label commandName="SimHeated" devLabel="Conducting" translation="传导"/>
	<label commandName="SimImageCompatibilityInfo" devLabel="For correct interpretation of this image use e.g. IE9, Chrome, Safari, Firefox" translation="为使该图像能够正常显示，请使用 IE9、Chrome、Safari、Firefox 等浏览器"/>
	<label commandName="SimImportedCFDGeneralSettingsHeatConductance" devLabel="Heat Conductance" translation="热传导"/>
	<label commandName="SimInchImperialUnitSystemName" devLabel="U.S. (in)" translation="美制(in)"/>
	<label commandName="SimIntermediateResultsUpdate" devLabel="Intermediate Results Update" translation="中间结果更新"/>
	<label commandName="SimInvalidCancelDefault" devLabel="You cannot cancel &quot;%1%&quot; study solve because the results have already been computed and they are being received at the moment." translation="您无法取消“%1%”分析求解，因为结果已计算完毕并且正在接收中。"/>
	<label commandName="SimInvalidCancelFinished" devLabel="You cannot cancel &quot;%1%&quot; study solve because the results have already been computed and received." translation="您无法取消“%1%”分析求解，因为结果已计算并接收完毕。"/>
	<label commandName="SimInvalidElement" devLabel="Invalid element." translation="元素无效。"/>
	<label commandName="SimInvalidFEACSManifestFile0" devLabel="Invalid FEACS manifest file. XMLDeserializeSection - missing node: Root" translation="无效的 FEACS manifest 文件。XMLDeserializeSection - 缺少节点: 根节点"/>
	<label commandName="SimInvalidFEACSManifestFile1" devLabel="Invalid FEACS manifest file. XMLDeserializeSection - missing node: MeshModel or Results" translation="无效的 FEACS manifest 文件。XMLDeserializeSection - 缺少节点: MeshModel 或 Results"/>
	<label commandName="SimInvalidFEACSManifestFile10" devLabel="Invalid FEACS manifest file - ProcessResultNode - missing MeshFragment" translation="无效的 FEACS manifest 文件 - ProcessResultNode - 缺少 MeshFragment"/>
	<label commandName="SimInvalidFEACSManifestFile12" devLabel="Invalid FEACS manifest file - ProcessResultSubComponentNode - missing attribute: id or min or max" translation="无效的 FEACS manifest 文件 - ProcessResultSubComponentNode - 缺少属性: ID、min 或 max"/>
	<label commandName="SimInvalidFEACSManifestFile13" devLabel="Invalid FEACS manifest file - ProcessResultSubComponentNode - Invalid field dimension." translation="无效的 FEACS manifest 文件 - ProcessResultSubComponentNode - 无效的字段大小。"/>
	<label commandName="SimInvalidFEACSManifestFile14" devLabel="Invalid FEACS manifest file - Processl2NormNode - missing attribute: min or max" translation="无效的 FEACS manifest 文件 - Processl2NormNode - 缺少属性: min 或 max"/>
	<label commandName="SimInvalidFEACSManifestFile15" devLabel="Invalid FEACS manifest file - ProcessAttributeNode - missing attribute: Name or Value" translation="无效的 FEACS manifest 文件 - ProcessAttributeNode - 缺少属性: Name 或 Value"/>
	<label commandName="SimInvalidFEACSManifestFile2" devLabel="Invalid FEACS manifest file. XMLDeserializeSection - missing attribute: Guid" translation="无效的 FEACS manifest 文件。XMLDeserializeSection - 缺少属性: Guid"/>
	<label commandName="SimInvalidFEACSManifestFile3" devLabel="Invalid FEACS manifest file. ProcessBodyMeshNode - missing attribute: path or id or refKey" translation="无效的 FEACS manifest 文件。ProcessBodyMeshNode - 缺少属性: Path、ID 或 refKey"/>
	<label commandName="SimInvalidFEACSManifestFile4" devLabel="Invalid FEACS manifest file. ProcessDomainNode - missing attribute ID or DisplayName or Unit" translation="无效的 FEACS manifest 文件。ProcessDomainNode - 缺少属性 ID 或者 DisplayName 或 Unit"/>
	<label commandName="SimInvalidFEACSManifestFile5" devLabel="Invalid FEACS manifest file. ProcessDomainPointNode - missing attribute: ID or Domain or Value" translation="无效的 FEACS manifest 文件。ProcessDomainPointNode - 缺少属性: ID、Domain 或 Value"/>
	<label commandName="SimInvalidFEACSManifestFile6" devLabel="Invalid FEACS manifest file. ProcessSamplePointNode - missing attribute: ID" translation="无效的 FEACS manifest 文件。 ProcessSamplePointNode - 缺少属性: ID"/>
	<label commandName="SimInvalidFEACSManifestFile7" devLabel="Invalid FEACS manifest file. ProcessSamplePointNode DomainPoint - missign attribute: ID" translation="无效的 FEACS manifest 文件。ProcessSamplePointNode DomainPoint - 缺少属性: ID"/>
	<label commandName="SimInvalidFEACSManifestFile8" devLabel="Invalid FEACS manifest file. ProcessSamplePointNode - invalid domainsPoint size" translation="无效的 FEACS manifest 文件。ProcessSamplePointNode - domainsPoint 大小无效"/>
	<label commandName="SimInvalidFEACSManifestFile9" devLabel="Invalid FEACS manifest file - ProcessResultNode - missing attribute: BodyIndex or ComponentId or Path or AffectedSide" translation="无效的 FEACS manifest 文件 - ProcessResultNode - 缺少属性: BodyIndex、ComponentId、Path 或 AffectedSide"/>
	<label commandName="SimInvalidGenCancelDefault" devLabel="You cannot cancel &quot;%1%&quot;, one or more outcomes have been generated." translation="您无法取消“%1%”，已生成一个或多个结果。"/>
	<label commandName="SimInvalidGenCancelFinished" devLabel="Generate for &quot;%1%&quot; completed, your outcomes can be viewed in Explore." translation="“%1%”的生成过程已完成，可在“浏览”中查看结果。"/>
	<label commandName="SimInvalidGenCancelForStudyInProgress" devLabel="The outcome generation for &quot;%1%&quot; is in progress. To modify the study and generate outcomes again, right-click the name of the study in the browser and clone it." translation="正在生成“%1%”的结果。若要修改分析并重新生成结果，请在浏览器的该分析名称上单击鼠标右键，然后克隆该分析。"/>
	<label commandName="SimJobAlreadyComplete" devLabel="Job already complete. Using results from local cache." translation="作业已完成。正在使用本地缓存中的结果。"/>
	<label commandName="SimJobCannotScheduleLegacyCloudSolve" devLabel="Cannot schedule a legacy cloud solve: ecosystem retired." translation="无法计划旧版云求解: 生态系统已停用。"/>
	<label commandName="SimJobFailCloudErr" devLabel="Unexpected server error during cloud solve." translation="在云求解过程中发生意外服务器错误。"/>
	<label commandName="SimJobFailScheduleAGDGatewayTimeout" devLabel="Gateway Timeout scheduling job, the job may have started." translation="调度作业时网关超时，该作业可能已启动。"/>
	<label commandName="SimJobFailScheduleAGDSolve" devLabel="Failed to start Generative solve." translation="无法启动衍生式求解。"/>
	<label commandName="SimJobFailScheduleAGDSolveInsufficientCloudCredits" devLabel="Insufficient cloud credits or non-commercial user." translation="没有足够的云积分或为非商用用户。"/>
	<label commandName="SimJobFailScheduleAGDSolveInsufficientTokens" devLabel="Insufficient tokens or non-commercial user." translation="代币不足或非商业用户。"/>
	<label commandName="SimJobFailSystemError" devLabel="System error during cloud solve." translation="在云求解过程中发生系统错误。"/>
	<label commandName="SimJobFailTimeout" devLabel="Solve job has timed out, try reducing the problem size" translation="求解作业已超时，请尝试减小问题大小"/>
	<label commandName="SimJobFailUnexpectedStatus" devLabel="System error during cloud solve: " translation="执行云求解期间出现系统错误: "/>
	<label commandName="SimJobFailUnexpectedStudyType" devLabel="Unexpected study type for results connected to study." translation="与分析关联的结果是非预期的分析类型。"/>
	<label commandName="SimLinkModalData" devLabel="Import Modal Data from" translation="导入模态数据位置"/>
	<label commandName="SimLinkTemperatureData" devLabel="Link Temperature Data" translation="链接温度数据"/>
	<label commandName="SimLoadCaseFluidConditions" devLabel="Fluid Conditions" translation="流体条件"/>
	<label commandName="SimLoadCaseReportWarning" devLabel=" Solve result of this load case is out of date." translation=" 此载荷工况的求解结果已过期。"/>
	<label commandName="SimLocalMeshControlNotSupported" devLabel="Local mesh control and mesh settings in Fusion are not supported in Ansys." translation="Ansys 不支持 Fusion 中的局部网格控制和网格设置。"/>
	<label commandName="SimMassReorthogonalization" devLabel="Mass Reorthogonalization" translation="质量重正交"/>
	<label commandName="SimMasterMeshNotSpecified" devLabel="Primary mesh should be specified" translation="应指定主网格"/>
	<label commandName="SimMaximumIterations" devLabel="Maximum Iteration" translation="最大迭代"/>
	<label commandName="SimMeshFailuresExists" devLabel="There are mesh failures from the last run." translation="上次运行后存在网格问题。"/>
	<label commandName="SimMeshPreviewControllerAPINotRegistered" devLabel="No controller is registered for previewing." translation="没有为预览注册控制器。"/>
	<label commandName="SimMeshPreviewFailedAnError" devLabel="An error occurred while creating the preview" translation="创建预览时发生错误"/>
	<label commandName="SimMeshPreviewFailedUnableToPreview" devLabel="Unable to preview the mesh" translation="无法预览网格"/>
	<label commandName="SimMeshPreviewInitFailed" devLabel="An error occurred while setting up the preview." translation="设置预览时发生错误。"/>
	<label commandName="SimMeshPreviewNULLController" devLabel="No previewer is available from the registered controller." translation="无法从注册的控制器使用预览程序。"/>
	<label commandName="SimMeshRefinementByEntitiesMeshSize" devLabel="Mesh Size" translation="网格大小"/>
	<label commandName="SimMeshRefinementByEntitiesName" devLabel="Local Mesh" translation="局部网格"/>
	<label commandName="SimMeshRefinementNotSupported" devLabel="Adaptive mesh refinement and mesh settings used in Fusion are not supported in Ansys." translation="Ansys 不支持在 Fusion 中使用的自适应网格优化和网格设置。"/>
	<label commandName="SimMeshRefinementsAutomaticRefinementForBearingLoad" devLabel="Automatic bearing load refinement for %1%" translation="针对 %1% 的自动轴承载荷优化"/>
	<label commandName="SimMeshingError" devLabel="Meshing error!" translation="网格化错误！"/>
	<label commandName="SimMeshingWarning" devLabel="Meshing warning!" translation="网格化警告！"/>
	<label commandName="SimMissingEdge" devLabel="Missing edge." translation="缺少边。"/>
	<label commandName="SimMissingFEACSResults" devLabel="No results to apply." translation="没有要应用的结果。"/>
	<label commandName="SimMissingManifestsForMeshResultsOrBoth" devLabel="Missing manifests for mesh, results or both." translation="缺少网格的 manifest 和/或结果。"/>
	<label commandName="SimMissingMeshDBs" devLabel="Missing mesh dbs." translation="缺少网格数据库。"/>
	<label commandName="SimMissingMeshDataContainers" devLabel="Mesh data containers are not present. This study is not ready to manage mesh data." translation="网格数据容器不存在。该分析尚未准备好管理网格数据。"/>
	<label commandName="SimMissingMeshManifestForPreviewMesh" devLabel="Missing mesh manifest for preview mesh." translation="缺少预览网格的网格 manifest。"/>
	<label commandName="SimMissingTriangle" devLabel="Missing triangle." translation="缺少三角形。"/>
	<label commandName="SimModalDampingCurve" devLabel="Modal Damping Curve" translation="模态阻尼曲线"/>
	<label commandName="SimModalDampingFactor" devLabel="Modal Damping Factor" translation="模态阻尼系数"/>
	<label commandName="SimModalGeneralSettingsExtractionMethod" devLabel="Extraction Method" translation="提取方法"/>
	<label commandName="SimModalGeneralSettingsFrequencyMax" devLabel="Frequency Max" translation="最大频率"/>
	<label commandName="SimModalGeneralSettingsFrequencyMin" devLabel="Frequency Min" translation="最小频率"/>
	<label commandName="SimModalGeneralSettingsNumberOfModes" devLabel="Number of Modes" translation="模式数"/>
	<label commandName="SimNastran_BSCONP_CTC" devLabel="Thermal Contact Conductance" translation="接触热传导"/>
	<label commandName="SimNastran_BSCONP_FSTIF" devLabel="Frictional Stiffness for Stick" translation="连杆的摩擦刚度"/>
	<label commandName="SimNastran_BSCONP_FT" devLabel="Weld Failure Theory" translation="焊接失效理论"/>
	<label commandName="SimNastran_BSCONP_MAR" devLabel="Maximum Allowable Adjustment Ratio" translation="允许的最大调整比"/>
	<label commandName="SimNastran_BSCONP_MAXAD_AutoFlag" devLabel="Automatic Maximum Activation Distance" translation="自动最大激活距离"/>
	<label commandName="SimNastran_BSCONP_MAXAD_Value" devLabel="Maximum Activation Distance" translation="最大激活距离"/>
	<label commandName="SimNastran_BSCONP_MAXNAD" devLabel="Maximum Normal Activation Distance" translation="最大法向激活距离"/>
	<label commandName="SimNastran_BSCONP_MAXRAD" devLabel="Maximum Radial Activation Distance" translation="最大径向激活距离"/>
	<label commandName="SimNastran_BSCONP_MU" devLabel="Coefficient of Static Friction" translation="静摩擦系数"/>
	<label commandName="SimNastran_BSCONP_PTYPE_SymmetryFlag" devLabel="Symmetric" translation="对称"/>
	<label commandName="SimNastran_BSCONP_SDMAXS" devLabel="Shear Stress (Damage Initiates)" translation="剪切应力(损伤萌生)"/>
	<label commandName="SimNastran_BSCONP_SDMAXT" devLabel="Tensile Stress (Damage Initiates)" translation="拉伸应力(损伤萌生)"/>
	<label commandName="SimNastran_BSCONP_SFACT" devLabel="Stiffness Factor" translation="刚度系数"/>
	<label commandName="SimNastran_BSCONP_SMAX" devLabel="Maximum Allowable Slip" translation="允许的最大滑移值"/>
	<label commandName="SimNastran_BSCONP_TMAX" devLabel="Maximum Allowable Penetration" translation="允许的最大穿透值"/>
	<label commandName="SimNastran_BSCONP_TRMIN" devLabel="Allowable Penetration Lower Bound Ratio" translation="允许的穿透边界下限比"/>
	<label commandName="SimNastran_BSCONP_UDINITS" devLabel="Tangential Slip (Damage Initiates)" translation="切向滑移(损伤萌生)"/>
	<label commandName="SimNastran_BSCONP_UDINITT" devLabel="Separation Normal (Damage Initiates)" translation="法向分离(损伤萌生)"/>
	<label commandName="SimNastran_BSCONP_UDMAXS" devLabel="Tangential Slip (Complete Failure)" translation="切向滑移(完全失效)"/>
	<label commandName="SimNastran_BSCONP_UDMAXT" devLabel="Separation Normal (Complete Failure)" translation="法向分离(完全失效)"/>
	<label commandName="SimNastran_BSCONP_W0" devLabel="Penetration Surface Offset" translation="穿透表面偏移"/>
	<label commandName="SimNastran_CONTACTGENERATE_FSTIF" devLabel="Frictional Stiffness for Stick" translation="连杆的摩擦刚度"/>
	<label commandName="SimNastran_CONTACTGENERATE_MAXAD" devLabel="Maximum Activation Distance" translation="最大激活距离"/>
	<label commandName="SimNastran_CONTACTGENERATE_MU" devLabel="Coefficient of Static Friction" translation="静摩擦系数"/>
	<label commandName="SimNastran_CONTACTGENERATE_SFACT" devLabel="Stiffness Factor" translation="刚度系数"/>
	<label commandName="SimNastran_CONTACTGENERATE_TMAX" devLabel="Maximum Allowable Penetration" translation="允许的最大穿透值"/>
	<label commandName="SimNastran_CONTACTGENERATE_W0" devLabel="Penetration Surface Offset" translation="穿透表面偏移"/>
	<label commandName="SimNoInformation" devLabel="No further information." translation="无其他信息。"/>
	<label commandName="SimNoRemoveRigidBodyModes" devLabel="To be able to define forces in equilibrium, use option Remove Rigid Body Modes." translation="为了能够在平衡中定义力，请使用选项“删除刚体模态”。"/>
	<label commandName="SimNoSimFatigueCaseNotSpecified" devLabel="No simulation fatigue case is specified" translation="未指定疲劳仿真案例"/>
	<label commandName="SimNoStructuralConstraintDefined" devLabel="Cannot solve: No structural constraint defined." translation="无法求解: 未定义结构约束。"/>
	<label commandName="SimNoStructuralConstraintDefinedWarning" devLabel="Warning: No structural constraint defined." translation="警告: 未定义结构约束。"/>
	<label commandName="SimNoStructuralConstraintInLoadCase" devLabel="Warning: No structural constraint defined in load case &quot;%1%&quot;." translation="警告: 在载荷工况“%1%”中未定义结构约束。"/>
	<label commandName="SimNoStructuralConstraintInLoadCaseError" devLabel="Cannot solve: No structural constraint defined in load case &quot;%1%&quot;." translation="无法求解: 在载荷工况“%1%”中未定义结构约束。"/>
	<label commandName="SimNoStructuralConstraintInLoadCaseWarning" devLabel="Warning: No structural constraint defined in load case &quot;%1%&quot;." translation="警告: 在载荷工况“%1%”中未定义结构约束。"/>
	<label commandName="SimNormalXXResult" devLabel="Normal XX" translation="法向 XX"/>
	<label commandName="SimNormalYYResult" devLabel="Normal YY" translation="法向 YY"/>
	<label commandName="SimNormalZZResult" devLabel="Normal ZZ" translation="法向 ZZ"/>
	<label commandName="SimNotEnoughStructuralConstraintsDefined" devLabel="Warning: Not enough structural constraints defined." translation="警告: 未定义足够的结构约束。"/>
	<label commandName="SimNotEnoughStructuralConstraintsInLoadCase" devLabel="Warning: Not enough structural constraints defined in load case &quot;%1%&quot;." translation="警告: 在载荷工况“%1%”中未定义足够的结构约束。"/>
	<label commandName="SimNumberOfIterationVector" devLabel="Number of Iteration Vectors" translation="迭代向量数"/>
	<label commandName="SimNumberOfModes" devLabel="Number of Modes" translation="模式数"/>
	<label commandName="SimNumberOfSteps" devLabel="Number of Steps" translation="步骤数"/>
	<label commandName="SimOptimizationPreserveLCEntityRequestNoSettings" devLabel="No applicable settings found" translation="未找到适用的设置"/>
	<label commandName="SimOptimizationPreserveLCEntityRequestNoSimCase" devLabel="No active simulation study" translation="无活动仿真分析"/>
	<label commandName="SimOutOfMemory" devLabel="Out of memory." translation="内存不足。"/>
	<label commandName="SimPartiallyConstrainedGroups" devLabel="Warning: Model contains %1% only partially constrained group(s) in load case &quot;%2%&quot;." translation="警告: 模型包含载荷工况“%2%”中 %1% 个仅部分约束的组。"/>
	<label commandName="SimPartiallyFixed" devLabel="Partially Fixed" translation="部分固定"/>
	<label commandName="SimPhase" devLabel="Phase: %1%" translation="阶段: %1%"/>
	<label commandName="SimPotentiallyFixed" devLabel="Potentially Fixed" translation="可能固定"/>
	<label commandName="SimPotentiallyMissingContacts" devLabel="Warning: Model contains %1% groups in load case &quot;%2%&quot;. Some contacts may be missing or they could be out of automatic contact detection tolerance. Use the Groups View command to visualize the separate groups of components." translation="警告: 模型包含载荷工况“%2%”中的 %1% 个组。可能缺少某些接触，或者它们超出自动接触检测公差。请使用“组视图”命令可视化零部件的不同组。"/>
	<label commandName="SimPotentiallyUnconstrainedGroups" devLabel="Warning: Model contains %1% group(s) which may not be fully constrained in load case &quot;%2%&quot;." translation="警告: 模型包含可能在载荷工况“%2%”中未完全约束的 %1% 个组。"/>
	<label commandName="SimPreMeshProcess" devLabel="Pre-mesh process." translation="预网格划分过程。"/>
	<label commandName="SimReactionForceResult" devLabel="Reaction Force" translation="反作用力"/>
	<label commandName="SimReferenceTemperature" devLabel="Reference Temperature" translation="参考温度"/>
	<label commandName="SimReportAbsoluteElementSize" devLabel="Average Element Size (absolute value)" translation="平均元素大小(绝对值)"/>
	<label commandName="SimReportAmbientTemperature" devLabel="Ambient Temperature" translation="环境温度"/>
	<label commandName="SimReportAngularBodyLoadAcceleration" devLabel="Acceleration" translation="加速度"/>
	<label commandName="SimReportAngularBodyLoadVelocity" devLabel="Velocity" translation="速度"/>
	<label commandName="SimReportAverageElementSize" devLabel="Average Element Size (% of model size)" translation="平均元素大小(占模型大小的百分比)"/>
	<label commandName="SimReportBodyLoadMagnitude" devLabel="Magnitude" translation="大小"/>
	<label commandName="SimReportBodyLoadPositionX" devLabel="X Distance" translation="X 距离"/>
	<label commandName="SimReportBodyLoadPositionY" devLabel="Y Distance" translation="Y 距离"/>
	<label commandName="SimReportBodyLoadPositionZ" devLabel="Z Distance" translation="Z 距离"/>
	<label commandName="SimReportBodyLoadXAngle" devLabel="X Angle" translation="X 角度"/>
	<label commandName="SimReportBodyLoadXValue" devLabel="X Value" translation="X 值"/>
	<label commandName="SimReportBodyLoadYAngle" devLabel="Y Angle" translation="Y 角度"/>
	<label commandName="SimReportBodyLoadYValue" devLabel="Y Value" translation="Y 值"/>
	<label commandName="SimReportBodyLoadZAngle" devLabel="Z Angle" translation="Z 角度"/>
	<label commandName="SimReportBodyLoadZValue" devLabel="Z Value" translation="Z 值"/>
	<label commandName="SimReportBodyName" devLabel="Body Name" translation="实体名称"/>
	<label commandName="SimReportBoltConnectorAxial" devLabel="Axial" translation="轴向"/>
	<label commandName="SimReportBoltConnectorBoltLength" devLabel="Bolt Length" translation="螺栓长度"/>
	<label commandName="SimReportBoltConnectorDensity" devLabel="Density" translation="密度"/>
	<label commandName="SimReportBoltConnectorDiameter" devLabel="Bolt Diameter" translation="螺栓直径"/>
	<label commandName="SimReportBoltConnectorElasticModulus" devLabel="Elastic Modulus" translation="弹性模量"/>
	<label commandName="SimReportBoltConnectorHeadWasher" devLabel="Head Washer" translation="头部垫片"/>
	<label commandName="SimReportBoltConnectorHeadWasherHeight" devLabel="Head Washer Height" translation="头部垫片高度"/>
	<label commandName="SimReportBoltConnectorMaterial" devLabel="Material" translation="材料"/>
	<label commandName="SimReportBoltConnectorMaterialCustom" devLabel="Custom" translation="自定义"/>
	<label commandName="SimReportBoltConnectorNutWasher" devLabel="Nut Washer" translation="螺母垫片"/>
	<label commandName="SimReportBoltConnectorNutWasherHeight" devLabel="Nut Washer Height" translation="螺母垫片高度"/>
	<label commandName="SimReportBoltConnectorPoissonsRatio" devLabel="Poisson's Ratio" translation="泊松比"/>
	<label commandName="SimReportBoltConnectorPreloadType" devLabel="Preload type" translation="预载类型"/>
	<label commandName="SimReportBoltConnectorSubType" devLabel="Bolt Subtype" translation="螺栓子类型"/>
	<label commandName="SimReportBoltConnectorThermalExpansionCoeff" devLabel="Thermal Expansion Coefficient" translation="热膨胀系数"/>
	<label commandName="SimReportBoltConnectorThreadedHole" devLabel="Threaded Hole" translation="螺纹孔"/>
	<label commandName="SimReportBoltConnectorTorque" devLabel="Torque" translation="转矩"/>
	<label commandName="SimReportBoltConnectorTorqueCoefficient" devLabel="Torque Coefficient" translation="扭矩系数"/>
	<label commandName="SimReportBoltConnectorUsableThreadLength" devLabel="Usable Thread Length" translation="可用螺纹长度"/>
	<label commandName="SimReportBoltConnectorWithNut" devLabel="With Nut" translation="带螺母"/>
	<label commandName="SimReportCalculationOptions" devLabel="Calculation Options" translation="计算选项"/>
	<label commandName="SimReportComponent" devLabel="Component" translation="零部件"/>
	<label commandName="SimReportComponentX" devLabel="Component X" translation="分量 X"/>
	<label commandName="SimReportComponentY" devLabel="Component Y" translation="分量 Y"/>
	<label commandName="SimReportComponentZ" devLabel="Component Z" translation="分量 Z"/>
	<label commandName="SimReportComponents" devLabel="Components" translation="零部件"/>
	<label commandName="SimReportConnectorDirRx" devLabel="Rx" translation="Rx"/>
	<label commandName="SimReportConnectorDirRy" devLabel="Ry" translation="Ry"/>
	<label commandName="SimReportConnectorDirRz" devLabel="Rz" translation="Rz"/>
	<label commandName="SimReportConnectorDirUx" devLabel="Ux" translation="Ux"/>
	<label commandName="SimReportConnectorDirUy" devLabel="Uy" translation="Uy"/>
	<label commandName="SimReportConnectorDirUz" devLabel="Uz" translation="Uz"/>
	<label commandName="SimReportConnectorSubType" devLabel="Subtype" translation="子类型"/>
	<label commandName="SimReportConnectorSubTypeInterpolation" devLabel="Interpolation" translation="插值"/>
	<label commandName="SimReportConnectorSubTypeRigidBody" devLabel="Rigid Body" translation="刚体"/>
	<label commandName="SimReportConnectorType" devLabel="Type" translation="类型"/>
	<label commandName="SimReportConnectors" devLabel="Connectors" translation="连接件"/>
	<label commandName="SimReportConstrDirAxial" devLabel="Axial" translation="轴向"/>
	<label commandName="SimReportConstrDirRadial" devLabel="Radial" translation="径向"/>
	<label commandName="SimReportConstrDirRx" devLabel="Rx" translation="Rx"/>
	<label commandName="SimReportConstrDirRy" devLabel="Ry" translation="Ry"/>
	<label commandName="SimReportConstrDirRz" devLabel="Rz" translation="Rz"/>
	<label commandName="SimReportConstrDirTangential" devLabel="Tangential" translation="切向"/>
	<label commandName="SimReportConstrDirUx" devLabel="Ux" translation="Ux"/>
	<label commandName="SimReportConstrDirUy" devLabel="Uy" translation="Uy"/>
	<label commandName="SimReportConstrDirUz" devLabel="Uz" translation="Uz"/>
	<label commandName="SimReportConstraintDisplacementX" devLabel="Displacement X" translation="位移 X"/>
	<label commandName="SimReportConstraintDisplacementY" devLabel="Displacement Y" translation="位移 Y"/>
	<label commandName="SimReportConstraintDisplacementZ" devLabel="Displacement Z" translation="位移 Z"/>
	<label commandName="SimReportConstraintName" devLabel="Constraint Name" translation="约束名称"/>
	<label commandName="SimReportConstraintRotationX" devLabel="Rotation X" translation="旋转 X"/>
	<label commandName="SimReportConstraintRotationY" devLabel="Rotation Y" translation="旋转 Y"/>
	<label commandName="SimReportConstraintRotationZ" devLabel="Rotation Z" translation="旋转 Z"/>
	<label commandName="SimReportConstraintTransientPrescribedAccelerationX" devLabel="Prescribed Acceleration X" translation="规定加速度 X"/>
	<label commandName="SimReportConstraintTransientPrescribedAccelerationY" devLabel="Prescribed Acceleration Y" translation="规定加速度 Y"/>
	<label commandName="SimReportConstraintTransientPrescribedAccelerationZ" devLabel="Prescribed Acceleration Z" translation="规定加速度 Z"/>
	<label commandName="SimReportConstraintTransientPrescribedAngleX" devLabel="Prescribed Angle X" translation="规定角度 X"/>
	<label commandName="SimReportConstraintTransientPrescribedAngleY" devLabel="Prescribed Angle Y" translation="规定角度 Y"/>
	<label commandName="SimReportConstraintTransientPrescribedAngleZ" devLabel="Prescribed Angle Z" translation="规定角度 Z"/>
	<label commandName="SimReportConstraintTransientPrescribedDisplacementX" devLabel="Prescribed Displacement X" translation="规定位移 X"/>
	<label commandName="SimReportConstraintTransientPrescribedDisplacementY" devLabel="Prescribed Displacement Y" translation="规定位移 Y"/>
	<label commandName="SimReportConstraintTransientPrescribedDisplacementZ" devLabel="Prescribed Displacement Z" translation="规定位移 Z"/>
	<label commandName="SimReportConstraintTransientPrescribedRotationalAccelerationX" devLabel="Prescribed Rotational Acceleration X" translation="规定转动加速度 X"/>
	<label commandName="SimReportConstraintTransientPrescribedRotationalAccelerationY" devLabel="Prescribed Rotational Acceleration Y" translation="规定转动加速度 Y"/>
	<label commandName="SimReportConstraintTransientPrescribedRotationalAccelerationZ" devLabel="Prescribed Rotational Acceleration Z" translation="规定转动加速度 Z"/>
	<label commandName="SimReportConstraintTransientPrescribedRotationalVelocityX" devLabel="Prescribed Rotational Velocity X" translation="规定转动速度 X"/>
	<label commandName="SimReportConstraintTransientPrescribedRotationalVelocityY" devLabel="Prescribed Rotational Velocity Y" translation="规定转动速度 Y"/>
	<label commandName="SimReportConstraintTransientPrescribedRotationalVelocityZ" devLabel="Prescribed Rotational Velocity Z" translation="规定转动速度 Z"/>
	<label commandName="SimReportConstraintTransientPrescribedVelocityX" devLabel="Prescribed Velocity X" translation="规定速度 X"/>
	<label commandName="SimReportConstraintTransientPrescribedVelocityY" devLabel="Prescribed Velocity Y" translation="规定速度 Y"/>
	<label commandName="SimReportConstraintTransientPrescribedVelocityZ" devLabel="Prescribed Velocity Z" translation="规定速度 Z"/>
	<label commandName="SimReportConstraintType" devLabel="Type" translation="类型"/>
	<label commandName="SimReportConstraints" devLabel="Constraints" translation="约束"/>
	<label commandName="SimReportContactTolerance" devLabel="Contact Tolerance" translation="接触公差"/>
	<label commandName="SimReportContacts" devLabel="Contacts" translation="接触"/>
	<label commandName="SimReportConvectionValue" devLabel="Convection Value" translation="对流值"/>
	<label commandName="SimReportConvergenceSettings" devLabel="Adaptive Mesh Refinement" translation="自适应网格优化"/>
	<label commandName="SimReportCurvedMeshElements" devLabel="Create Curved Mesh Elements" translation="创建弯曲网格元素"/>
	<label commandName="SimReportDampingSettings" devLabel="Damping" translation="阻尼"/>
	<label commandName="SimReportDisplacementType" devLabel="Displacement Type" translation="位移类型"/>
	<label commandName="SimReportDropHeight" devLabel="Drop Height" translation="跌落高度"/>
	<label commandName="SimReportElementDeltions" devLabel="Element Deletion Criteria" translation="单元删除标准"/>
	<label commandName="SimReportElementOrder" devLabel="Element Order" translation="元素顺序"/>
	<label commandName="SimReportEmissivityValue" devLabel="Emissivity Value" translation="发射率值"/>
	<label commandName="SimReportExplicitEventDuration" devLabel="Total Event Duration" translation="事件总持续时间"/>
	<label commandName="SimReportExplicitHeartbeatIntervals" devLabel="Solve Status Information Interval (Heartbeat)" translation="求解状态信息间隔(心跳)"/>
	<label commandName="SimReportExplicitIntermediateResultsUpdate" devLabel="Intermediate Results Update" translation="中间结果更新"/>
	<label commandName="SimReportExplicitIntervalsPerStepNumber" devLabel="Number of Result Intervals per Step" translation="每步结果间隔数"/>
	<label commandName="SimReportExplicitMassProportionalAlpha" devLabel="Mass Proportional, Alpha" translation="质量比例，Alpha"/>
	<label commandName="SimReportExplicitMovement" devLabel="Movement" translation="移动"/>
	<label commandName="SimReportExplicitQuasiSteps" devLabel="Number of Steps" translation="步骤数"/>
	<label commandName="SimReportExplicitRayleighDamping" devLabel="Rayleigh Damping" translation="瑞利阻尼"/>
	<label commandName="SimReportExplicitResultIntervals" devLabel="Number of Result Intervals" translation="结果间隔数"/>
	<label commandName="SimReportExplicitSolverDynamic" devLabel="Dynamic (considers inertia)" translation="动态(考虑惯性)"/>
	<label commandName="SimReportExplicitSolverStatic" devLabel="Quasi-static (no inertia)" translation="准静态(无惯性)"/>
	<label commandName="SimReportExplicitStiffnessProportionalBeta" devLabel="Stiffness Proportional, Beta" translation="刚度比例，Beta"/>
	<label commandName="SimReportFatigueCases" devLabel="Fatigue Cases" translation="疲劳案例"/>
	<label commandName="SimReportFatigueCycleHistory" devLabel="Cycle History" translation="循环历史"/>
	<label commandName="SimReportFatigueLifeFactors" devLabel="Fatigue Life Factors" translation="疲劳寿命系数"/>
	<label commandName="SimReportFluidDensity" devLabel="Fluid Density" translation="流体密度"/>
	<label commandName="SimReportFluidType" devLabel="Fluid Type" translation="流体类型"/>
	<label commandName="SimReportGeneralSettings" devLabel="General" translation="常规"/>
	<label commandName="SimReportGlobalInitialTemperature" devLabel="Global Initial Temperature" translation="全局初始温度"/>
	<label commandName="SimReportGradingFactor" devLabel="Max. Adjacent Mesh Size Ratio" translation="最大相邻网格大小比"/>
	<label commandName="SimReportGraph" devLabel="Graph" translation="绘图"/>
	<label commandName="SimReportGravityX" devLabel="X Value" translation="X 值"/>
	<label commandName="SimReportGravityY" devLabel="Y Value" translation="Y 值"/>
	<label commandName="SimReportGravityZ" devLabel="Z Value" translation="Z 值"/>
	<label commandName="SimReportGridView" devLabel="Grid View" translation="栅格视图"/>
	<label commandName="SimReportGuidedResults" devLabel="Guided Results" translation="指导结果"/>
	<label commandName="SimReportHarmonicPhase" devLabel="Phase" translation="相位"/>
	<label commandName="SimReportHeatConductance" devLabel="Heat Conductance" translation="热传导"/>
	<label commandName="SimReportIdealizationType" devLabel="Type" translation="类型"/>
	<label commandName="SimReportInitialTemperature" devLabel="Initial Temperature" translation="初始温度"/>
	<label commandName="SimReportInputStudies" devLabel="Input Studies" translation="输入分析"/>
	<label commandName="SimReportInternalHeatValue" devLabel="Internal Heat Value" translation="内部热量值"/>
	<label commandName="SimReportIsSteel" devLabel="Steel" translation="钢"/>
	<label commandName="SimReportItemDisplaced" devLabel="Displaced" translation="位移"/>
	<label commandName="SimReportItemDisplacement" devLabel="Displacement Vector" translation="位移矢量"/>
	<label commandName="SimReportItemUndisplaced" devLabel="Undisplaced" translation="无位移"/>
	<label commandName="SimReportLastModificationDate" devLabel="Last Modification Date" translation="上次修改日期"/>
	<label commandName="SimReportLastSolveDate" devLabel="Last Solve Date" translation="上次求解日期"/>
	<label commandName="SimReportLimitedAreaRadius" devLabel="Radius" translation="半径"/>
	<label commandName="SimReportLinearBodyLoadAcceleration" devLabel="Acceleration" translation="加速度"/>
	<label commandName="SimReportLinearBodyLoadVelocity" devLabel="Velocity" translation="速度"/>
	<label commandName="SimReportLoadAAngle" devLabel="A Angle" translation="角度"/>
	<label commandName="SimReportLoadAmbientTemperatureCurve" devLabel="Ambient Temperature Curve" translation="环境温度曲线"/>
	<label commandName="SimReportLoadConvectionCurve" devLabel="Convection Curve" translation="对流曲线"/>
	<label commandName="SimReportLoadEmissivityCurve" devLabel="Emissivity Curve" translation="辐射率曲线"/>
	<label commandName="SimReportLoadFlipDirection" devLabel="Flip Direction" translation="翻转方向"/>
	<label commandName="SimReportLoadInternalHeatCurve" devLabel="Internal Heat Curve" translation="内部热量曲线"/>
	<label commandName="SimReportLoadMagnitude" devLabel="Magnitude" translation="大小"/>
	<label commandName="SimReportLoadMagnitudeCurve" devLabel="Magnitude Curve" translation="幅度曲线"/>
	<label commandName="SimReportLoadMultiplierCurve" devLabel="Multiplier Curve" translation="增强曲线"/>
	<label commandName="SimReportLoadPerEntity" devLabel="Force Per Entity" translation="每实体的力"/>
	<label commandName="SimReportLoadPositionX" devLabel="Position X" translation="位置 X"/>
	<label commandName="SimReportLoadPositionY" devLabel="Position Y" translation="位置 Y"/>
	<label commandName="SimReportLoadPositionZ" devLabel="Position Z" translation="位置 Z"/>
	<label commandName="SimReportLoadSurfaceHeatCurve" devLabel="Heat Source Curve" translation="热源曲线"/>
	<label commandName="SimReportLoadTemperatureCurve" devLabel="Temperature Curve" translation="温度曲线"/>
	<label commandName="SimReportLoadType" devLabel="Type" translation="类型"/>
	<label commandName="SimReportLoadX" devLabel="X Value" translation="X 值"/>
	<label commandName="SimReportLoadXAngle" devLabel="X Angle" translation="X 角度"/>
	<label commandName="SimReportLoadY" devLabel="Y Value" translation="Y 值"/>
	<label commandName="SimReportLoadYAngle" devLabel="Y Angle" translation="Y 角度"/>
	<label commandName="SimReportLoadZ" devLabel="Z Value" translation="Z 值"/>
	<label commandName="SimReportLoadZAngle" devLabel="Z Angle" translation="Z 角度"/>
	<label commandName="SimReportLoads" devLabel="Loads" translation="载荷"/>
	<label commandName="SimReportMagnitude" devLabel="Magnitude" translation="大小"/>
	<label commandName="SimReportMass" devLabel="Mass" translation="质量"/>
	<label commandName="SimReportMassXDistance" devLabel="X Distance" translation="X 距离"/>
	<label commandName="SimReportMassYDistance" devLabel="Y Distance" translation="Y 距离"/>
	<label commandName="SimReportMassZDistance" devLabel="Z Distance" translation="Z 距离"/>
	<label commandName="SimReportMaterial" devLabel="Material" translation="材料"/>
	<label commandName="SimReportMaterials" devLabel="Materials" translation="材料"/>
	<label commandName="SimReportMaxAspectRatio" devLabel="Max. Aspect Ratio" translation="最大纵横比"/>
	<label commandName="SimReportMaxNumberOfRefinementSteps" devLabel="Number of Refinement Steps" translation="优化步数"/>
	<label commandName="SimReportMaxTurnAngle" devLabel="Max. Turn Angle on Curves (Deg.)" translation="曲线上的最大转角(度)"/>
	<label commandName="SimReportMeshElements" devLabel="Elements" translation="元素"/>
	<label commandName="SimReportMeshNodes" devLabel="Nodes" translation="节点"/>
	<label commandName="SimReportMeshRefinementElementSize" devLabel="Element Size" translation="元素大小"/>
	<label commandName="SimReportMeshRefinementMultiplier" devLabel="Multiplier" translation="倍增"/>
	<label commandName="SimReportMeshSettings" devLabel="Mesh" translation="网格"/>
	<label commandName="SimReportMeshType" devLabel="Type" translation="类型"/>
	<label commandName="SimReportMinElementSize" devLabel="Minimum Element Size (% of average size)" translation="最小元素大小(占平均大小的百分比)"/>
	<label commandName="SimReportName" devLabel="Name" translation="名称"/>
	<label commandName="SimReportNextSteps" devLabel="Next Steps" translation="后续步骤"/>
	<label commandName="SimReportOffsetDistance" devLabel="Offset Distance" translation="偏移距离"/>
	<label commandName="SimReportOutputInterval" devLabel="Output Interval" translation="输出间隔"/>
	<label commandName="SimReportOutputIntervalType" devLabel="Output Interval Type" translation="输出间隔类型"/>
	<label commandName="SimReportOutputOptions" devLabel="Output Options" translation="输出选项"/>
	<label commandName="SimReportPartBasedMeasure" devLabel="Scale Mesh Size Per Part" translation="缩放每个零件的网格大小"/>
	<label commandName="SimReportParticipationX" devLabel="Participation X" translation="参与 X"/>
	<label commandName="SimReportParticipationY" devLabel="Participation Y" translation="参与 Y"/>
	<label commandName="SimReportParticipationZ" devLabel="Participation Z" translation="参与 Z"/>
	<label commandName="SimReportPointMassAuto" devLabel="Point Mass (Auto)" translation="点质量(自动)"/>
	<label commandName="SimReportPointMassManual" devLabel="Point Mass (Manual)" translation="点质量(手动)"/>
	<label commandName="SimReportPointMasses" devLabel="Point Masses" translation="点质量"/>
	<label commandName="SimReportPortionOfElementsToRefine" devLabel="Portion of Elements to Refine (%)" translation="要优化的部分元素(%)"/>
	<label commandName="SimReportPreservedBoundaries" devLabel="Preserved Boundaries" translation="保留边界"/>
	<label commandName="SimReportProblemEndTime" devLabel="Problem End Time" translation="问题结束时间"/>
	<label commandName="SimReportProperties" devLabel="Properties" translation="特性"/>
	<label commandName="SimReportRFComponent" devLabel="Component (X,Y,Z)" translation="分量(X,Y,Z)"/>
	<label commandName="SimReportRFConstraintName" devLabel="Constraint Name" translation="约束名称"/>
	<label commandName="SimReportRFMagnitude" devLabel="Magnitude" translation="大小"/>
	<label commandName="SimReportRTSSDirectionAngle" devLabel="Angle" translation="角度"/>
	<label commandName="SimReportRTSSDirectionImpactPoint" devLabel="Impact Point" translation="碰撞点"/>
	<label commandName="SimReportRTSSDirectionReference" devLabel="Reference" translation="参照"/>
	<label commandName="SimReportRTSSFloor" devLabel="Floor" translation="楼板"/>
	<label commandName="SimReportRTSSFloorView" devLabel="View" translation="视图"/>
	<label commandName="SimReportRTSSGravityMagnitude" devLabel="Gravity Magnitude" translation="重力大小"/>
	<label commandName="SimReportRTSSInitialVelocity" devLabel="Initial Velocity Magnitude" translation="初始速度大小"/>
	<label commandName="SimReportRTSSMaterial" devLabel="Material" translation="材料"/>
	<label commandName="SimReportRTSSMaterialCustom" devLabel="Custom" translation="自定义"/>
	<label commandName="SimReportRTSSMaterialDensity" devLabel="Mass per Unit Area" translation="每单位面积的质量"/>
	<label commandName="SimReportRTSSMaterialFrictionCoefficient" devLabel="Friction Coefficient" translation="摩擦系数"/>
	<label commandName="SimReportRTSSMaterialRigid" devLabel="Rigid" translation="刚性"/>
	<label commandName="SimReportRTSSMaterialThickness" devLabel="Thickness" translation="厚度"/>
	<label commandName="SimReportRTSSPlaneLeftAngle" devLabel="Left Angle" translation="左角度"/>
	<label commandName="SimReportRTSSPlaneLeftDistance" devLabel="Left Distance" translation="左距离"/>
	<label commandName="SimReportRTSSPlanePlanar" devLabel="Planar" translation="平面"/>
	<label commandName="SimReportRTSSPlaneRightAngle" devLabel="Right Angle" translation="右角度"/>
	<label commandName="SimReportRTSSPlaneRightDistance" devLabel="Right Distance" translation="右侧距离"/>
	<label commandName="SimReportRTSSPlaneThreeSegment" devLabel="Three Segment" translation="三段"/>
	<label commandName="SimReportRTSSPlaneType" devLabel="Type" translation="类型"/>
	<label commandName="SimReportRTSSPosition" devLabel="Position" translation="位置"/>
	<label commandName="SimReportRTSSPositionDirectionType" devLabel="Direction Type" translation="方向类型"/>
	<label commandName="SimReportRTSSStiffness" devLabel="Stiffness" translation="刚度"/>
	<label commandName="SimReportRTSSVelocity" devLabel="Velocity" translation="速度"/>
	<label commandName="SimReportReactionForce" devLabel="Reaction Force" translation="反作用力"/>
	<label commandName="SimReportReactionForces" devLabel="Reaction Forces" translation="反作用力"/>
	<label commandName="SimReportReactionMoment" devLabel="Reaction Moment" translation="反作用力矩"/>
	<label commandName="SimReportReactionType" devLabel="Reaction Type" translation="反作用力类型"/>
	<label commandName="SimReportRemoveRigidBodyModes" devLabel="Remove Rigid Body Modes" translation="删除刚体模态"/>
	<label commandName="SimReportResultBoundaryBox" devLabel="Box" translation="长方体"/>
	<label commandName="SimReportResultBoundaryCentroid" devLabel="Centroid of Region" translation="区域的质心"/>
	<label commandName="SimReportResultBoundaryCentroidX" devLabel="X: " translation="X: "/>
	<label commandName="SimReportResultBoundaryCentroidY" devLabel="Y: " translation="Y: "/>
	<label commandName="SimReportResultBoundaryCentroidZ" devLabel="Z: " translation="Z: "/>
	<label commandName="SimReportResultBoundaryCylinder" devLabel="Cylinder" translation="圆柱体"/>
	<label commandName="SimReportResultBoundaryRadius" devLabel="Radius: " translation="半径: "/>
	<label commandName="SimReportResultBoundaryShape" devLabel="Boundary Shape" translation="边界形状"/>
	<label commandName="SimReportResultBoundarySize" devLabel="Boundary Size" translation="边界大小"/>
	<label commandName="SimReportResultBoundarySizeX" devLabel="X: " translation="X: "/>
	<label commandName="SimReportResultBoundarySizeY" devLabel="Y: " translation="Y: "/>
	<label commandName="SimReportResultBoundarySizeZ" devLabel="Z: " translation="Z: "/>
	<label commandName="SimReportResultBoundarySphere" devLabel="Sphere" translation="球体"/>
	<label commandName="SimReportResultExpression" devLabel="Expression" translation="表达式"/>
	<label commandName="SimReportResultMax" devLabel="Maximum" translation="最大值"/>
	<label commandName="SimReportResultMin" devLabel="Minimum" translation="最小值"/>
	<label commandName="SimReportResultName" devLabel="Name" translation="名称"/>
	<label commandName="SimReportResultParameter" devLabel="Parameter" translation="参数"/>
	<label commandName="SimReportResultSPState" devLabel="State" translation="状态"/>
	<label commandName="SimReportResultSummary" devLabel="Result Summary" translation="结果汇总"/>
	<label commandName="SimReportResultSymmetryPlane" devLabel="Symmetry Plane" translation="对称平面"/>
	<label commandName="SimReportResultSymmetryPlane1" devLabel="Plane 1" translation="平面 1"/>
	<label commandName="SimReportResultSymmetryPlane2" devLabel="Plane 2" translation="平面 2"/>
	<label commandName="SimReportResultSymmetryPlane3" devLabel="Plane 3" translation="平面 3"/>
	<label commandName="SimReportResultSymmetryPlaneActive" devLabel="Active" translation="活动"/>
	<label commandName="SimReportResultSymmetryPlaneInactive" devLabel="Inactive" translation="非活动"/>
	<label commandName="SimReportResultType" devLabel="Result type" translation="结果类型"/>
	<label commandName="SimReportResultValue" devLabel="Value" translation="值"/>
	<label commandName="SimReportResults" devLabel="Results" translation="结果"/>
	<label commandName="SimReportResultsToConverge" devLabel="Results for Baseline Accuracy" translation="基线精度的结果"/>
	<label commandName="SimReportSafetyFactorResult" devLabel="Safety Factor" translation="安全系数"/>
	<label commandName="SimReportSelectedEntities" devLabel="Selected Entities" translation="选定的实体"/>
	<label commandName="SimReportSettings" devLabel="Settings" translation="设置"/>
	<label commandName="SimReportShapeGenerator" devLabel="Shape Optimization" translation="形状优化"/>
	<label commandName="SimReportShellContactTolerance" devLabel="Shell Contact Tolerance (as a multiple of shell thickness)" translation="壳体接触公差(作为壳厚度的倍数)"/>
	<label commandName="SimReportShells" devLabel="Shells" translation="壳体"/>
	<label commandName="SimReportSolids" devLabel="Solids" translation="实体"/>
	<label commandName="SimReportStep" devLabel="Step %1%" translation="步骤 %1%"/>
	<label commandName="SimReportStrength" devLabel="Strength" translation="强度"/>
	<label commandName="SimReportStressFreeTemperatures" devLabel="Stress-free Temperatures (customized only)" translation="无应力温度(仅限自定义)"/>
	<label commandName="SimReportStudyProperties" devLabel="Study Properties" translation="分析特性"/>
	<label commandName="SimReportStudySetp" devLabel="Study Setup" translation="分析设置"/>
	<label commandName="SimReportStudyType" devLabel="Study Type" translation="分析类型"/>
	<label commandName="SimReportSubResult" devLabel="Sub-result" translation="子结果"/>
	<label commandName="SimReportSurfaceHeatValue" devLabel="Heat Source Value" translation="热源值"/>
	<label commandName="SimReportSymmetryPlanes" devLabel="Symmetry Planes" translation="对称平面"/>
	<label commandName="SimReportTOCriteria" devLabel="Criteria" translation="标准"/>
	<label commandName="SimReportTOGoals" devLabel="Goals" translation="目标"/>
	<label commandName="SimReportTOResultMassAfter" devLabel="Mass after" translation="之后的质量"/>
	<label commandName="SimReportTOResultMassBefore" devLabel="Mass before" translation="之前的质量"/>
	<label commandName="SimReportTOResultMassRatio" devLabel="Mass Ratio" translation="质量比"/>
	<label commandName="SimReportTOResultSummary" devLabel="Optimization Summary" translation="优化摘要"/>
	<label commandName="SimReportTargetConvergenceRate" devLabel="Results Convergence Tolerance (%)" translation="结果收敛公差(%)"/>
	<label commandName="SimReportTemperatureResult" devLabel="Temperature" translation="温度"/>
	<label commandName="SimReportUniversalCenterOfMass" devLabel="Universal Center of Mass" translation="万向质心"/>
	<label commandName="SimReportValue" devLabel="Value" translation="值"/>
	<label commandName="SimReportXDistance" devLabel="X Distance" translation="X 距离"/>
	<label commandName="SimReportYDistance" devLabel="Y Distance" translation="Y 距离"/>
	<label commandName="SimReportZDistance" devLabel="Z Distance" translation="Z 距离"/>
	<label commandName="SimSICustomUnitSystemName" devLabel="Custom" translation="自定义"/>
	<label commandName="SimSIMetricUnitSystemName" devLabel="Metric (SI)" translation="公制(SI)"/>
	<label commandName="SimSelfIntersection" devLabel="Self intersection." translation="自交。"/>
	<label commandName="SimShearXYResult" devLabel="Shear XY" translation="剪切应力 XY"/>
	<label commandName="SimShearXZResult" devLabel="Shear XZ" translation="剪切 XZ"/>
	<label commandName="SimShearYZResult" devLabel="Shear YZ" translation="剪切应力 YZ"/>
	<label commandName="SimSmallFeature" devLabel="Small feature." translation="较小的特征。"/>
	<label commandName="SimSolidMeshing" devLabel="Solid meshing." translation="实体网格化。"/>
	<label commandName="SimSolveMeshErrors" devLabel="Please inspect mesh failures." translation="请检查网格问题。"/>
	<label commandName="SimSolveMeshWarning" devLabel="Please inspect mesh hints." translation="请检查网格提示。"/>
	<label commandName="SimSolverControlOptions" devLabel="Solver Control Options" translation="求解器控制选项"/>
	<label commandName="SimSolverDataMeshDetails" devLabel="Mesh Details:" translation="网格详细信息:"/>
	<label commandName="SimSolverDataSummary" devLabel="Summary:" translation="摘要:"/>
	<label commandName="SimStrainResult" devLabel="Strain" translation="应变"/>
	<label commandName="SimStressResult" devLabel="Stress" translation="应力"/>
	<label commandName="SimStructuralDOF" devLabel="Structural" translation="结构"/>
	<label commandName="SimStrumSequenceCheck" devLabel="Strum Sequence Check" translation="Strum 序列检查"/>
	<label commandName="SimSurfaceMeshing" devLabel="Surface meshing." translation="曲面网格化。"/>
	<label commandName="SimSymmetricPenetrationType" devLabel="Symmetric" translation="对称"/>
	<label commandName="SimTSGeneralSettingEnableGravity" devLabel="Enable Gravity" translation="启用重力"/>
	<label commandName="SimTSGeneralSettingEnableInitialVelocity" devLabel="Enable Initial Velocity" translation="启用初始速度"/>
	<label commandName="SimTSGeneralSettingsEndTime" devLabel="End Time" translation="结束时间"/>
	<label commandName="SimTSGeneralSettingsFrequencyDependent" devLabel="Frequency Dependent" translation="频率相关"/>
	<label commandName="SimTSGeneralSettingsGravityMagnitude" devLabel="Gravity Magnitude" translation="重力大小"/>
	<label commandName="SimTSGeneralSettingsIntialVelocityMagnitude" devLabel="Initial Velocity Magnitude" translation="初始速度大小"/>
	<label commandName="SimTSGeneralSettingsMassFactor" devLabel="Mass Factor" translation="质量系数"/>
	<label commandName="SimTSGeneralSettingsModalDampingFactor" devLabel="Modal Damping Factor" translation="模态阻尼系数"/>
	<label commandName="SimTSGeneralSettingsStiffnessFactor" devLabel="Stiffness Factor" translation="刚度系数"/>
	<label commandName="SimTemperature" devLabel="Temperature" translation="温度"/>
	<label commandName="SimThermalDOF" devLabel="Thermal" translation="热量"/>
	<label commandName="SimThermalGradientResult" devLabel="Thermal Gradient" translation="热梯度"/>
	<label commandName="SimThermalSteadyGeneralSettingsGlobalInitialTemperature" devLabel="Global Initial Temperature" translation="全局初始温度"/>
	<label commandName="SimThermalSteadyGeneralSettingsHeatConductance" devLabel="Heat Conductance" translation="热传导"/>
	<label commandName="SimThermalStressGeneralSettingsHeatConductance" devLabel="Heat Conductance" translation="热传导"/>
	<label commandName="SimThermalStressGeneralSettingsReferenceTemperature" devLabel="Reference Temperature" translation="参考温度"/>
	<label commandName="SimThermalTransientGeneralSettingsEndTime" devLabel="End Time" translation="结束时间"/>
	<label commandName="SimThermalTransientGeneralSettingsHeatConductance" devLabel="Heat Conductance" translation="热传导"/>
	<label commandName="SimThermalTransientGeneralSettingsInitialTemperature" devLabel="Initial Temperature" translation="初始温度"/>
	<label commandName="SimThermalTransientGeneralSettingsOutputInterval" devLabel="Output Interval" translation="输出间隔"/>
	<label commandName="SimThirdPrincipalResult" devLabel="3rd Principal" translation="第三主应力"/>
	<label commandName="SimTooManyElements" devLabel="Too Many Elements." translation="元素太多。"/>
	<label commandName="SimTooManyNodes" devLabel="Too Many Nodes." translation="节点太多。"/>
	<label commandName="SimTotalDisplacement" devLabel="Displacement, Total" translation="位移，总计"/>
	<label commandName="SimTotalNumberOutputInterval" devLabel="Total Number" translation="总数"/>
	<label commandName="SimTotalResult" devLabel="Total" translation="总计"/>
	<label commandName="SimUnconstrainedGroupsThermalError" devLabel="Error: Model contains %1% thermally unconstrained group(s) in load case &quot;%2%&quot;." translation="错误: 模型包含载荷工况“%2%”中 %1% 个热不受约束的组。"/>
	<label commandName="SimUnconstrainedGroupsThermalWarn" devLabel="Warning: Model contains %1% thermally unconstrained group(s) in load case &quot;%2%&quot;." translation="警告: 模型包含载荷工况“%2%”中 %1% 个热不受约束的组。"/>
	<label commandName="SimUnheated" devLabel="Insulated" translation="隔热"/>
	<label commandName="SimUnitPercentage" devLabel="Percentage" translation="百分比"/>
	<label commandName="SimUnitPieces" devLabel="Pieces" translation="分块"/>
	<label commandName="SimUnitsAcceleration" devLabel="Acceleration" translation="加速度"/>
	<label commandName="SimUnitsAngle" devLabel="Angle" translation="角度"/>
	<label commandName="SimUnitsCurrent" devLabel="Current" translation="当前"/>
	<label commandName="SimUnitsElectricalResistance" devLabel="Electrical Resistance" translation="电阻"/>
	<label commandName="SimUnitsEnergy" devLabel="Energy" translation="能量"/>
	<label commandName="SimUnitsForce" devLabel="Force" translation="力"/>
	<label commandName="SimUnitsLength" devLabel="Length" translation="长度"/>
	<label commandName="SimUnitsMass" devLabel="Mass" translation="质量"/>
	<label commandName="SimUnitsPower" devLabel="Power" translation="功率"/>
	<label commandName="SimUnitsPressure" devLabel="Pressure" translation="压力"/>
	<label commandName="SimUnitsTemprature" devLabel="Temperature" translation="温度"/>
	<label commandName="SimUnitsTime" devLabel="Time" translation="时间"/>
	<label commandName="SimUnitsVelocity" devLabel="Velocity" translation="速度"/>
	<label commandName="SimUnitsViscosity" devLabel="Viscosity" translation="粘度"/>
	<label commandName="SimUnitsVoltage" devLabel="Voltage" translation="电压"/>
	<label commandName="SimUnitsVolumeFlowRate" devLabel="Flow Rate" translation="流量"/>
	<label commandName="SimUnknown" devLabel="Unknown." translation="未知。"/>
	<label commandName="SimUnsymmetricPenetrationType" devLabel="Unsymmetric" translation="不对称"/>
	<label commandName="SimVertexMeshing" devLabel="Vertex meshing." translation="顶点网格化。"/>
	<label commandName="SimVonMisesStress" devLabel="von Mises Stress" translation="Mises 应力"/>
	<label commandName="SimVonMisesStressResult" devLabel="Von Mises" translation="Mises 等效应力"/>
	<label commandName="SimWMMigratorFinishedMigrationMessage" devLabel="Finished Migration" translation="已完成移植"/>
	<label commandName="SimWMMigratorFinishingMigrationMessage" devLabel="Finishing Migration" translation="完成移植"/>
	<label commandName="SimWMMigratorPreparingMigrationMessage" devLabel="Preparing for Migration" translation="正在准备进行移植"/>
	<label commandName="SimWMMigratorStudiesMigrationMessage" devLabel="Migrating Simulation Studies" translation="正在移植仿真分析"/>
	<label commandName="SimWireMeshing" devLabel="Wire meshing." translation="线框网格化。"/>
	<label commandName="SimXResult" devLabel="X" translation="X"/>
	<label commandName="SimYResult" devLabel="Y" translation="Y"/>
	<label commandName="SimZResult" devLabel="Z" translation="Z"/>
	<label commandName="Sim_IDS_ASSEMBLY_PART_ELEMENT_LIMIT" devLabel="4500000 elements" translation="4500000 个元素"/>
	<label commandName="Sim_IDS_DIFFERENT_BODY_COUNT" devLabel="One or more configurations result in a different number of bodies than the base configuration.&#xA;These configurations will not be solved." translation="一个或多个配置导致实体数量与基础配置不同。&#xA;将不对这些配置进行求解。"/>
	<label commandName="Sim_IDS_ERR_FAILED_GEN_CONFIG" devLabel="Failed to generate configuration" translation="无法生成配置"/>
	<label commandName="Sim_IDS_MESH_WARN_BODY_TOO_THIN" devLabel="Certain parts of the model are extremely thin, which can lead to long meshing/solution times and numerical instabilities in the results. Please use careful judgment when interpreting the results." translation="模型的某些部件非常薄，这可能会导致较长的网格化/求解时间，并且可能会导致结果中出现数值不稳定。请在解释结果时仔细判断。"/>
	<label commandName="Sim_IDS_MESH_WARN_LOCAL_SIZE_VERY_SMALL" devLabel="Warning: Local mesh control '%s' specifies a very small element size." translation="警告: 局部网格控制“%s”指定了非常小的元素大小。"/>
	<label commandName="Sim_IDS_MESH_WARN_THIN_BODY" devLabel="Body '%s' is thin." translation="“%s”是薄实体。"/>
	<label commandName="Sim_IDS_NO_CONTACT_BODY" devLabel="Warning: There are no contacts attached to body(s): %s" translation="警告: 没有附着到实体的接触: %s"/>
	<label commandName="Sim_IDS_NO_SOLID_BODY" devLabel="Error processing the geometry. The model contains no solid body." translation="处理几何图元时出错。模型未包含任何实体。"/>
	<label commandName="Sim_IDS_PROGRESS_BAR_TEXTTOP_BREP_COMPUTE" devLabel="Computing geometry..." translation="正在计算几何图元..."/>
	<label commandName="Sim_IDS_PROGRESS_BAR_TEXTTOP_CONTACT_COMPUTE" devLabel="Computing contacts..." translation="正在计算接触..."/>
	<label commandName="Sim_IDS_PROGRESS_BAR_TEXTTOP_MESH_COMPUTE" devLabel="Computing mesh..." translation="正在计算网格..."/>
	<label commandName="Sim_IDS_PROGRESS_BAR_TEXTTOP_MESH_REFINE1" devLabel="Adaptive Refinement Setup..." translation="自适应细化设置..."/>
	<label commandName="Sim_IDS_PROGRESS_BAR_TEXTTOP_MESH_REFINE2" devLabel="Adaptive Refinement..." translation="自适应优化..."/>
	<label commandName="Sim_IDS_PROGRESS_BAR_TEXTTOP_RESULT_COMPUTE" devLabel="Computing results..." translation="正在计算结果..."/>
	<label commandName="Sim_IDS_SERVER_ERR0" devLabel="" translation=""/>
	<label commandName="Sim_IDS_SERVER_ERR1" devLabel="Internal solver error" translation="内部求解器错误"/>
	<label commandName="Sim_IDS_SERVER_ERR10" devLabel="Not enough constraints and not balanced load" translation="没有足够的约束且不是平衡载荷"/>
	<label commandName="Sim_IDS_SERVER_ERR100" devLabel="Internal Error # 100" translation="内部错误号 100"/>
	<label commandName="Sim_IDS_SERVER_ERR101" devLabel="Internal Error # 101" translation="内部错误号 101"/>
	<label commandName="Sim_IDS_SERVER_ERR11" devLabel="Error opening the mesh file" translation="打开网格文件时出错"/>
	<label commandName="Sim_IDS_SERVER_ERR12" devLabel="Error opening the debug output file" translation="打开调试输出文件时出错"/>
	<label commandName="Sim_IDS_SERVER_ERR13" devLabel="Error processing the mesh" translation="处理网格时出错"/>
	<label commandName="Sim_IDS_SERVER_ERR14" devLabel="There are no new DOFs for the current p-cycle" translation="没有用于当前 p_cycle 的新自由度"/>
	<label commandName="Sim_IDS_SERVER_ERR15" devLabel="Not enough memory to continue operation" translation="内存不足，无法继续操作"/>
	<label commandName="Sim_IDS_SERVER_ERR16" devLabel="Improper constraints, material or mesh" translation="约束、材料或网格不正确"/>
	<label commandName="Sim_IDS_SERVER_ERR17" devLabel="Not enough constraints" translation="没有足够的约束"/>
	<label commandName="Sim_IDS_SERVER_ERR18" devLabel="Internal Error # ps_1" translation="内部错误号 ps_1"/>
	<label commandName="Sim_IDS_SERVER_ERR19" devLabel="Internal Error # ps_2" translation="内部错误号 ps_2"/>
	<label commandName="Sim_IDS_SERVER_ERR2" devLabel="Load not defined" translation="未定义载荷"/>
	<label commandName="Sim_IDS_SERVER_ERR20" devLabel="Internal Error # ps_3" translation="内部错误号 ps_3"/>
	<label commandName="Sim_IDS_SERVER_ERR201" devLabel="Internal Error # 201" translation="内部错误号 201"/>
	<label commandName="Sim_IDS_SERVER_ERR202" devLabel="Internal Error # 202" translation="内部错误号 202"/>
	<label commandName="Sim_IDS_SERVER_ERR204" devLabel="Internal Error # 204" translation="内部错误号 204"/>
	<label commandName="Sim_IDS_SERVER_ERR206" devLabel="Internal Error # 206" translation="内部错误号 206"/>
	<label commandName="Sim_IDS_SERVER_ERR208" devLabel="Internal Error # 208" translation="内部错误号 208"/>
	<label commandName="Sim_IDS_SERVER_ERR21" devLabel="Error opening the tetrahedra data file" translation="打开四面体数据文件时出错"/>
	<label commandName="Sim_IDS_SERVER_ERR210" devLabel="Internal Error # 210" translation="内部错误号 210"/>
	<label commandName="Sim_IDS_SERVER_ERR212" devLabel="Internal Error # 212" translation="内部错误号 212"/>
	<label commandName="Sim_IDS_SERVER_ERR216" devLabel="Internal Error # 216" translation="内部错误号 216"/>
	<label commandName="Sim_IDS_SERVER_ERR22" devLabel="Error opening the result file" translation="打开结果文件时出错"/>
	<label commandName="Sim_IDS_SERVER_ERR23" devLabel="Unable to create a temporary file" translation="无法创建临时文件"/>
	<label commandName="Sim_IDS_SERVER_ERR24" devLabel="Error while closing a temporary file" translation="关闭临时文件时出错"/>
	<label commandName="Sim_IDS_SERVER_ERR25" devLabel="Error while reading from a temporary file" translation="从临时文件读取时出错"/>
	<label commandName="Sim_IDS_SERVER_ERR26" devLabel="Error while writing to a temporary file" translation="向临时文件写入时出错"/>
	<label commandName="Sim_IDS_SERVER_ERR27" devLabel="Simulation canceled" translation="仿真已取消"/>
	<label commandName="Sim_IDS_SERVER_ERR28" devLabel="Bad modeling parameter - some faces have disappeared!" translation="建模参数错误 - 某些面已消失！"/>
	<label commandName="Sim_IDS_SERVER_ERR29" devLabel="Error executing the solver." translation="执行求解器时出错。"/>
	<label commandName="Sim_IDS_SERVER_ERR3" devLabel="Unacceptable combination of boundary condition and element type" translation="不可接受的边界条件和元素类型组合"/>
	<label commandName="Sim_IDS_SERVER_ERR30" devLabel="Internal Error # 30" translation="内部错误号 30"/>
	<label commandName="Sim_IDS_SERVER_ERR301" devLabel="Internal Error # 301" translation="内部错误号 301"/>
	<label commandName="Sim_IDS_SERVER_ERR31" devLabel="Internal Error: Can not use the same file for the input and the output" translation="内部错误: 不能对输入和输出使用同一文件"/>
	<label commandName="Sim_IDS_SERVER_ERR32" devLabel="Internal Error: Can not open the thermal load file." translation="内部错误: 无法打开热载荷文件。"/>
	<label commandName="Sim_IDS_SERVER_ERR33" devLabel="Error reading the thermal load file." translation="读取热载荷文件时出错。"/>
	<label commandName="Sim_IDS_SERVER_ERR34" devLabel="Add-in format is not supported." translation="插件格式不受支持。"/>
	<label commandName="Sim_IDS_SERVER_ERR35" devLabel="Internal solver error. Can not process the contacts." translation="内部求解器错误。无法处理接触。"/>
	<label commandName="Sim_IDS_SERVER_ERR36" devLabel="Some rigid body modes remain after application of constraints" translation="某些刚体模式在应用约束后仍保留"/>
	<label commandName="Sim_IDS_SERVER_ERR37" devLabel="Load is directed along a rigid body mode" translation="载荷沿刚体模式方向"/>
	<label commandName="Sim_IDS_SERVER_ERR38" devLabel="Can not open the pre-stress file" translation="无法打开预应力文件"/>
	<label commandName="Sim_IDS_SERVER_ERR39" devLabel="Error reading the pre-stress file" translation="读取预应力文件时出错"/>
	<label commandName="Sim_IDS_SERVER_ERR4" devLabel="Degenerate element" translation="退化元素"/>
	<label commandName="Sim_IDS_SERVER_ERR40" devLabel="Improper preloading" translation="预加载不正确"/>
	<label commandName="Sim_IDS_SERVER_ERR41" devLabel="Mesh at the contacts is too coarse. It is recommended to use local mesh control in the areas of high stress concentration." translation="接触位置的网格过粗。建议在高应力集中区域使用局部网格控制。"/>
	<label commandName="Sim_IDS_SERVER_ERR42" devLabel="The assembly breaks up into disjointed pieces" translation="部件分成不连接的各个部分"/>
	<label commandName="Sim_IDS_SERVER_ERR43" devLabel="Nonlinear iterations diverge" translation="非线性迭代发散"/>
	<label commandName="Sim_IDS_SERVER_ERR44" devLabel="Internal Error: Data import failed" translation="内部错误: 数据导入失败"/>
	<label commandName="Sim_IDS_SERVER_ERR45" devLabel="Error processing the contacts" translation="处理接触时出错"/>
	<label commandName="Sim_IDS_SERVER_ERR5" devLabel="Internal Error # 5" translation="内部错误号 5"/>
	<label commandName="Sim_IDS_SERVER_ERR555" devLabel="Internal Error #555" translation="内部错误号 555"/>
	<label commandName="Sim_IDS_SERVER_ERR6" devLabel="Element material is not defined" translation="未定义单元材料"/>
	<label commandName="Sim_IDS_SERVER_ERR600" devLabel="Internal Error: SAT translation failed" translation="内部错误: SAT 转换失败"/>
	<label commandName="Sim_IDS_SERVER_ERR601" devLabel="Internal Error: Regularization failed" translation="内部错误: 规则化失败"/>
	<label commandName="Sim_IDS_SERVER_ERR602" devLabel="Unknown error in geometry builder" translation="几何图元生成器中发生未知错误"/>
	<label commandName="Sim_IDS_SERVER_ERR612" devLabel="Currently import of surface models is not supported" translation="当前不支持导入表面模型"/>
	<label commandName="Sim_IDS_SERVER_ERR613" devLabel="Geometry translation failed. Solid body breaks into multiple bodies or into disconnected surfaces" translation="几何图元转换失败。实体分为多个实体或不连接的曲面"/>
	<label commandName="Sim_IDS_SERVER_ERR614" devLabel="Geometry processing failed. Solid body could not be mapped back to any Simulus entity" translation="几何图元处理失败。实体无法映射回任何 Simulus 实体"/>
	<label commandName="Sim_IDS_SERVER_ERR615" devLabel="Body '%s' cannot be processed." translation="无法处理实体“%s”。"/>
	<label commandName="Sim_IDS_SERVER_ERR7" devLabel="Material property set is not defined" translation="未定义材料特性集"/>
	<label commandName="Sim_IDS_SERVER_ERR701" devLabel="Simulation canceled" translation="仿真已取消"/>
	<label commandName="Sim_IDS_SERVER_ERR702" devLabel="Mesh failed: The mesher reported an unknown error" translation="生成网格失败: 网格生成器报告未知错误"/>
	<label commandName="Sim_IDS_SERVER_ERR703" devLabel="Mesh failed: The mesher failed to allocate enough memory to compute the mesh. Try reducing the mesh size." translation="生成网格失败: 网格生成器无法分配足够的内存来计算网格。请尝试减小网格大小。"/>
	<label commandName="Sim_IDS_SERVER_ERR704" devLabel="Mesh failed: Vertex failure" translation="网格失败: 顶点故障"/>
	<label commandName="Sim_IDS_SERVER_ERR705" devLabel="Mesh failed: Edge failure" translation="网格失败: 边故障"/>
	<label commandName="Sim_IDS_SERVER_ERR706" devLabel="Mesh failed: Face failure" translation="网格失败: 面故障"/>
	<label commandName="Sim_IDS_SERVER_ERR707" devLabel="Mesh failed: Body failure" translation="网格失败: 实体故障"/>
	<label commandName="Sim_IDS_SERVER_ERR708" devLabel="Mesh failed: Curvature failure" translation="网格失败: 曲率故障"/>
	<label commandName="Sim_IDS_SERVER_ERR709" devLabel="Mesh failed: The mesher encountered a self-intersection. Try repairing the model using Inspect &gt; Interference in the Design environment." translation="生成网格失败: 网格生成器遇到自交。请尝试在设计环境中使用“检验”&gt;“干涉”修复模型。"/>
	<label commandName="Sim_IDS_SERVER_ERR710" devLabel="Mesh failed: The mesher encountered a corrupted entity. Try repairing the model using Inspect &gt; Validate in the Design environment with the 'Document Settings' &gt; 'Do not capture Design History' option disabled" translation="生成网格失败: 网格生成器遇到损坏的实体。请尝试在“文档设置”&gt;“不捕获设计历史”选项处于禁用状态的情况下，在设计环境中使用“检验”&gt;“验证”修复模型"/>
	<label commandName="Sim_IDS_SERVER_ERR711" devLabel="Mesh failed: The mesher exceeded an internal limit for nodes in a single body. Try reducing the mesh size." translation="生成网格失败: 网格生成器超出单个实体中节点的内部限制。请尝试减小网格大小。"/>
	<label commandName="Sim_IDS_SERVER_ERR8" devLabel="The load is inconsistent with the boundary conditions" translation="载荷与边界条件不一致"/>
	<label commandName="Sim_IDS_SERVER_ERR9" devLabel="Coordinate system is referenced but not defined" translation="引用但未定义坐标系"/>
	<label commandName="Sim_IDS_SIMULATION_LOG_SERVER1" devLabel="Solution time: %ss" translation="求解时间: %ss"/>
	<label commandName="Sim_IDS_SIMULATION_LOG_SERVER2" devLabel="Computed %s frequency modes" translation="已计算 %s 个频率模式"/>
	<label commandName="Sim_IDS_SIMULATION_LOG_SERVER3" devLabel="Soft spring was added" translation="已添加软簧"/>
	<label commandName="Sim_IDS_SIMULATION_LOG_SERVER4" devLabel="Model separates into %s independent groups of bodies" translation="模型分离为 %s 个独立的实体组"/>
	<label commandName="Sim_IDS_SIMULATION_LOG_SERVER5" devLabel="Mesh at contact %s is too coarse" translation="接触 %s 位置的网格过于粗"/>
	<label commandName="Sim_IDS_SIMULATION_LOG_SERVER6" devLabel="Contact %s: direction of the non-bonded edge-to-edge contact can not be determined" translation="接触 %s: 无法确定非粘合边到边接触的方向"/>
	<label commandName="Sim_IDS_SIMULATION_LOG_SERVER7" devLabel="The deformation is large compared to the model size. Please verify that load and constraint settings are appropriately scaled." translation="变形大于模型大小。请验证载荷和约束设置的比例是否适当。"/>
	<label commandName="Sim_IDS_SIMULATION_LOG_SERVER8" devLabel="Number of equations solved: %s" translation="求解的方程数量: %s"/>
	<label commandName="Sim_IDS_SIMULATION_LOG_SERVER9" devLabel="Computed %s buckling modes" translation="已计算 %s 屈曲模式"/>
	<label commandName="Sim_IDS_SIM_ERROR_COMPUTE_MESH" devLabel="Compute mesh before proceeding." translation="请先计算网格，然后再继续。"/>
	<label commandName="Sim_IDS_SIM_ERROR_CONTACTS" devLabel="Compute automatic contacts before proceeding." translation="请先计算自动接触，然后再继续。"/>
	<label commandName="Sim_IDS_SIM_ERROR_DESIGN_PARA_HAS_DEPENDENT" devLabel="One or more parameters in the Parametric Table have dependent objects which are not allowed in the Table, and must be removed: %s" translation="“参数化表”中的一个或多个参数具有从属对象，这些对象不允许在表中存在且必须删除: %s"/>
	<label commandName="Sim_IDS_SIM_ERROR_INVALIDCONSTRAINT" devLabel="Invalid constraint: %s" translation="无效约束: %s"/>
	<label commandName="Sim_IDS_SIM_ERROR_INVALIDLOAD" devLabel="Invalid load: %s" translation="无效载荷: %s"/>
	<label commandName="Sim_IDS_SIM_ERROR_INVALIDSHELL" devLabel="Invalid shell: %s" translation="无效的壳: %s"/>
	<label commandName="Sim_IDS_SIM_ERROR_INVALIDSHELLDEFINITION" devLabel="Invalid shell definition (unconnected lumps/gaps): %s" translation="无效的壳定义(未连接的块/间隙): %s"/>
	<label commandName="Sim_IDS_SIM_ERROR_LOADONFIX" devLabel="All loads are acting on entities which have fixed constraints applied on them" translation="所有载荷均作用于已应用固定约束的实体"/>
	<label commandName="Sim_IDS_SIM_ERROR_MATERIALS" devLabel="Can not run. Some materials are not defined correctly. Please assign a valid study material using Study Materials command." translation="无法运行。未正确定义某些材料。请使用“分析材料”命令指定有效的分析材料。"/>
	<label commandName="Sim_IDS_SIM_ERROR_MESH_FAILURE" devLabel="Repair mesh failures before proceeding." translation="请先修复网格问题，然后再继续。"/>
	<label commandName="Sim_IDS_SIM_ERROR_MESH_OUTOFDATE" devLabel="Update mesh before proceeding." translation="请先更新网格，然后再继续。"/>
	<label commandName="Sim_IDS_SIM_ERROR_NOCONSTRAINT" devLabel="No constraint defined." translation="未定义约束。"/>
	<label commandName="Sim_IDS_SIM_ERROR_NOLOAD" devLabel="No load defined." translation="未定义载荷。"/>
	<label commandName="Sim_IDS_SIM_ERROR_TO_MASSTARGET_UNACHIEVABLE" devLabel="The Target Mass %% could not be attained. %1%" translation="无法达到目标质量 %%。%1%"/>
	<label commandName="Sim_IDS_SIM_ERROR_TO_MASSTARGET_UNACHIEVABLE_EX" devLabel="The Target Mass %% could not be attained (%2% requested, %1% achieved)." translation="无法达到目标质量 %% (请求的大小为 %2%，达到了 %1%)。"/>
	<label commandName="Sim_IDS_SINGLE_PART_ELEMENT_LIMIT" devLabel="6000000 elements" translation="6000000 个元素"/>
	<label commandName="Sim_IDS_TOO_MANY_ELEMENTS" devLabel="Mesh failed: The mesher exceeded an internal limit (%1%) for elements in a model.  Please increase the average element size and/or simplify the model and try solving again." translation="生成网格失败: 网格生成器超出模型中元素的内部限制(%1%)。请增加平均元素大小并/或简化模型，然后重试求解。"/>
	<label commandName="Sim_IDS_TOO_MANY_NODES" devLabel="Mesh failed: The mesher exceeded an internal limit (%1%) for elements in a model.  Please increase the average element size and/or simplify the model and try solving again." translation="生成网格失败: 网格生成器超出模型中元素的内部限制(%1%)。请增加平均元素大小并/或简化模型，然后重试求解。"/>
	<label commandName="Sim_IDS_WARN_MESH_BODY_USEVOXEL" devLabel="Body '%s' uses voxel mesh. Adaptive mesh refinements are not supported for this body." translation="实体“%s”使用体素网格。此实体不支持自适应网格优化。"/>
	<label commandName="SimulationStudyIsMissing" devLabel="Simulation Study is missing" translation="缺少仿真分析"/>
</Resource>