<?xml version="1.0" encoding="utf-8"?>
<Resource>
	<label commandName="SimGenerativeAdditiveMethodGroup" devLabel="Additive" translation="增材"/>
	<label commandName="SimGenerativeAllMethodssGroup" devLabel="All methods" translation="所有方法"/>
	<label commandName="SimGenerativeCuttingMethodGroup" devLabel="2-axis Cutting" translation="2 轴切削"/>
	<label commandName="SimGenerativeDieCastingMethodGroup" devLabel="Die Casting" translation="铸造"/>
	<label commandName="SimGenerativeFrameMethodGroup" devLabel="Frame" translation="框架"/>
	<label commandName="SimGenerativeMillingMethodGroup" devLabel="Milling" translation="铣削"/>
	<label commandName="SimGenerativeUnrestrictedMethodGroup" devLabel="Unrestricted" translation="无限制"/>
	<label commandName="SimJobLimitElementCountMeshSizeExceeded" devLabel="The current maximum mesh size of %1% elements has been exceeded." translation="已超出 %1% 个元素的当前最大网格大小。"/>
	<label commandName="SimJobLimitGenericMeshSizeExceeded" devLabel="The current maximum mesh size has been exceeded." translation="已超出当前最大网格大小。"/>
	<label commandName="SimJobLimitGenericMeshSizeExceededRectification" devLabel="Please increase the average element size and/or simplify the model and try solving again." translation="请增加平均元素大小和/或简化模型，然后再次尝试求解。"/>
	<label commandName="SimJobLimitModalMeshSizeExceededRectification" devLabel="Please increase the average element size, decrease the number of modes and/or simplify the model and try solving again." translation="请增加平均元素大小、减少模式数和/或简化模型，然后再次尝试求解。"/>
	<label commandName="Sim_IDS_DIFFERENT_BODY_COUNT" devLabel="One or more configurations result in a different number of bodies than the base configuration.&#xA;These configurations will not be solved." translation="一个或多个配置导致实体数量与基础配置不同。&#xA;将不对这些配置进行求解。"/>
	<label commandName="Sim_IDS_ERR_FAILED_GEN_CONFIG" devLabel="Failed to generate configuration" translation="无法生成配置"/>
	<label commandName="Sim_IDS_MESH_WARN_BODY_TOO_THIN" devLabel="Certain parts of the model are extremely thin, which can lead to long meshing/solution times and numerical instabilities in the results. Please use careful judgment when interpreting the results." translation="模型的某些部件非常薄，这可能会导致较长的网格化/求解时间，并且可能会导致结果中出现数值不稳定。请在解释结果时仔细判断。"/>
	<label commandName="Sim_IDS_MESH_WARN_LOCAL_SIZE_VERY_SMALL" devLabel="Warning: Local mesh control '%s' specifies a very small element size." translation="警告: 局部网格控制“%s”指定了非常小的元素大小。"/>
	<label commandName="Sim_IDS_MESH_WARN_THIN_BODY" devLabel="Body '%s' is thin." translation="“%s”是薄实体。"/>
	<label commandName="Sim_IDS_NO_CONTACT_BODY" devLabel="Warning: There are no contacts attached to body(s): %s" translation="警告: 没有附着到实体的接触: %s"/>
	<label commandName="Sim_IDS_NO_SOLID_BODY" devLabel="Error processing the geometry. The model contains no solid body." translation="处理几何图元时出错。模型未包含任何实体。"/>
	<label commandName="Sim_IDS_PROGRESS_BAR_TEXTTOP_BREP_COMPUTE" devLabel="Computing geometry..." translation="正在计算几何图元..."/>
	<label commandName="Sim_IDS_PROGRESS_BAR_TEXTTOP_CONTACT_COMPUTE" devLabel="Computing contacts..." translation="正在计算接触..."/>
	<label commandName="Sim_IDS_PROGRESS_BAR_TEXTTOP_MESH_COMPUTE" devLabel="Computing mesh..." translation="正在计算网格..."/>
	<label commandName="Sim_IDS_PROGRESS_BAR_TEXTTOP_MESH_REFINE1" devLabel="Adaptive Refinement Setup..." translation="自适应细化设置..."/>
	<label commandName="Sim_IDS_PROGRESS_BAR_TEXTTOP_MESH_REFINE2" devLabel="Adaptive Refinement..." translation="自适应优化..."/>
	<label commandName="Sim_IDS_PROGRESS_BAR_TEXTTOP_RESULT_COMPUTE" devLabel="Computing results..." translation="正在计算结果..."/>
	<label commandName="Sim_IDS_SERVER_ERR0" devLabel="" translation=""/>
	<label commandName="Sim_IDS_SERVER_ERR1" devLabel="Internal solver error" translation="内部求解器错误"/>
	<label commandName="Sim_IDS_SERVER_ERR10" devLabel="Not enough constraints and not balanced load" translation="没有足够的约束且不是平衡载荷"/>
	<label commandName="Sim_IDS_SERVER_ERR100" devLabel="Internal Error # 100" translation="内部错误号 100"/>
	<label commandName="Sim_IDS_SERVER_ERR101" devLabel="Internal Error # 101" translation="内部错误号 101"/>
	<label commandName="Sim_IDS_SERVER_ERR11" devLabel="Error opening the mesh file" translation="打开网格文件时出错"/>
	<label commandName="Sim_IDS_SERVER_ERR12" devLabel="Error opening the debug output file" translation="打开调试输出文件时出错"/>
	<label commandName="Sim_IDS_SERVER_ERR13" devLabel="Error processing the mesh" translation="处理网格时出错"/>
	<label commandName="Sim_IDS_SERVER_ERR14" devLabel="There are no new DOFs for the current p-cycle" translation="没有用于当前 p_cycle 的新自由度"/>
	<label commandName="Sim_IDS_SERVER_ERR15" devLabel="Not enough memory to continue operation" translation="内存不足，无法继续操作"/>
	<label commandName="Sim_IDS_SERVER_ERR16" devLabel="Improper constraints, material or mesh" translation="约束、材料或网格不正确"/>
	<label commandName="Sim_IDS_SERVER_ERR17" devLabel="Not enough constraints" translation="没有足够的约束"/>
	<label commandName="Sim_IDS_SERVER_ERR18" devLabel="Internal Error # ps_1" translation="内部错误号 ps_1"/>
	<label commandName="Sim_IDS_SERVER_ERR19" devLabel="Internal Error # ps_2" translation="内部错误号 ps_2"/>
	<label commandName="Sim_IDS_SERVER_ERR2" devLabel="Load not defined" translation="未定义载荷"/>
	<label commandName="Sim_IDS_SERVER_ERR20" devLabel="Internal Error # ps_3" translation="内部错误号 ps_3"/>
	<label commandName="Sim_IDS_SERVER_ERR201" devLabel="Internal Error # 201" translation="内部错误号 201"/>
	<label commandName="Sim_IDS_SERVER_ERR202" devLabel="Internal Error # 202" translation="内部错误号 202"/>
	<label commandName="Sim_IDS_SERVER_ERR204" devLabel="Internal Error # 204" translation="内部错误号 204"/>
	<label commandName="Sim_IDS_SERVER_ERR206" devLabel="Internal Error # 206" translation="内部错误号 206"/>
	<label commandName="Sim_IDS_SERVER_ERR208" devLabel="Internal Error # 208" translation="内部错误号 208"/>
	<label commandName="Sim_IDS_SERVER_ERR21" devLabel="Error opening the tetrahedra data file" translation="打开四面体数据文件时出错"/>
	<label commandName="Sim_IDS_SERVER_ERR210" devLabel="Internal Error # 210" translation="内部错误号 210"/>
	<label commandName="Sim_IDS_SERVER_ERR212" devLabel="Internal Error # 212" translation="内部错误号 212"/>
	<label commandName="Sim_IDS_SERVER_ERR216" devLabel="Internal Error # 216" translation="内部错误号 216"/>
	<label commandName="Sim_IDS_SERVER_ERR22" devLabel="Error opening the result file" translation="打开结果文件时出错"/>
	<label commandName="Sim_IDS_SERVER_ERR23" devLabel="Unable to create a temporary file" translation="无法创建临时文件"/>
	<label commandName="Sim_IDS_SERVER_ERR24" devLabel="Error while closing a temporary file" translation="关闭临时文件时出错"/>
	<label commandName="Sim_IDS_SERVER_ERR25" devLabel="Error while reading from a temporary file" translation="从临时文件读取时出错"/>
	<label commandName="Sim_IDS_SERVER_ERR26" devLabel="Error while writing to a temporary file" translation="向临时文件写入时出错"/>
	<label commandName="Sim_IDS_SERVER_ERR27" devLabel="Simulation canceled" translation="仿真已取消"/>
	<label commandName="Sim_IDS_SERVER_ERR28" devLabel="Bad modeling parameter - some faces have disappeared!" translation="建模参数错误 - 某些面已消失！"/>
	<label commandName="Sim_IDS_SERVER_ERR29" devLabel="Error executing the solver." translation="执行求解器时出错。"/>
	<label commandName="Sim_IDS_SERVER_ERR3" devLabel="Unacceptable combination of boundary condition and element type" translation="不可接受的边界条件和元素类型组合"/>
	<label commandName="Sim_IDS_SERVER_ERR30" devLabel="Internal Error # 30" translation="内部错误号 30"/>
	<label commandName="Sim_IDS_SERVER_ERR301" devLabel="Internal Error # 301" translation="内部错误号 301"/>
	<label commandName="Sim_IDS_SERVER_ERR31" devLabel="Internal Error: Can not use the same file for the input and the output" translation="内部错误: 不能对输入和输出使用同一文件"/>
	<label commandName="Sim_IDS_SERVER_ERR32" devLabel="Internal Error: Can not open the thermal load file." translation="内部错误: 无法打开热载荷文件。"/>
	<label commandName="Sim_IDS_SERVER_ERR33" devLabel="Error reading the thermal load file." translation="读取热载荷文件时出错。"/>
	<label commandName="Sim_IDS_SERVER_ERR34" devLabel="Add-in format is not supported." translation="插件格式不受支持。"/>
	<label commandName="Sim_IDS_SERVER_ERR35" devLabel="Internal solver error. Can not process the contacts." translation="内部求解器错误。无法处理接触。"/>
	<label commandName="Sim_IDS_SERVER_ERR36" devLabel="Some rigid body modes remain after application of constraints" translation="某些刚体模式在应用约束后仍保留"/>
	<label commandName="Sim_IDS_SERVER_ERR37" devLabel="Load is directed along a rigid body mode" translation="载荷沿刚体模式方向"/>
	<label commandName="Sim_IDS_SERVER_ERR38" devLabel="Can not open the pre-stress file" translation="无法打开预应力文件"/>
	<label commandName="Sim_IDS_SERVER_ERR39" devLabel="Error reading the pre-stress file" translation="读取预应力文件时出错"/>
	<label commandName="Sim_IDS_SERVER_ERR4" devLabel="Degenerate element" translation="退化元素"/>
	<label commandName="Sim_IDS_SERVER_ERR40" devLabel="Improper preloading" translation="预加载不正确"/>
	<label commandName="Sim_IDS_SERVER_ERR41" devLabel="Mesh at the contacts is too coarse. It is recommended to use local mesh control in the areas of high stress concentration." translation="接触位置的网格过粗。建议在高应力集中区域使用局部网格控制。"/>
	<label commandName="Sim_IDS_SERVER_ERR42" devLabel="The assembly breaks up into disjointed pieces" translation="部件分成不连接的各个部分"/>
	<label commandName="Sim_IDS_SERVER_ERR43" devLabel="Nonlinear iterations diverge" translation="非线性迭代发散"/>
	<label commandName="Sim_IDS_SERVER_ERR44" devLabel="Internal Error: Data import failed" translation="内部错误: 数据导入失败"/>
	<label commandName="Sim_IDS_SERVER_ERR45" devLabel="Error processing the contacts" translation="处理接触时出错"/>
	<label commandName="Sim_IDS_SERVER_ERR5" devLabel="Internal Error # 5" translation="内部错误号 5"/>
	<label commandName="Sim_IDS_SERVER_ERR555" devLabel="Internal Error #555" translation="内部错误号 555"/>
	<label commandName="Sim_IDS_SERVER_ERR6" devLabel="Element material is not defined" translation="未定义单元材料"/>
	<label commandName="Sim_IDS_SERVER_ERR600" devLabel="Internal Error: SAT translation failed" translation="内部错误: SAT 转换失败"/>
	<label commandName="Sim_IDS_SERVER_ERR601" devLabel="Internal Error: Regularization failed" translation="内部错误: 规则化失败"/>
	<label commandName="Sim_IDS_SERVER_ERR602" devLabel="Unknown error in geometry builder" translation="几何图元生成器中发生未知错误"/>
	<label commandName="Sim_IDS_SERVER_ERR612" devLabel="Currently import of surface models is not supported" translation="当前不支持导入表面模型"/>
	<label commandName="Sim_IDS_SERVER_ERR613" devLabel="Geometry translation failed. Solid body breaks into multiple bodies or into disconnected surfaces" translation="几何图元转换失败。实体分为多个实体或不连接的曲面"/>
	<label commandName="Sim_IDS_SERVER_ERR614" devLabel="Geometry processing failed. Solid body could not be mapped back to any Simulus entity" translation="几何图元处理失败。实体无法映射回任何 Simulus 实体"/>
	<label commandName="Sim_IDS_SERVER_ERR615" devLabel="Body '%s' cannot be processed." translation="无法处理实体“%s”。"/>
	<label commandName="Sim_IDS_SERVER_ERR7" devLabel="Material property set is not defined" translation="未定义材料特性集"/>
	<label commandName="Sim_IDS_SERVER_ERR701" devLabel="Simulation canceled" translation="仿真已取消"/>
	<label commandName="Sim_IDS_SERVER_ERR702" devLabel="Mesh failed: Unknown error" translation="网格失败: 未知错误"/>
	<label commandName="Sim_IDS_SERVER_ERR703" devLabel="Mesh failed: Very large number of elements generated, mesher cannot proceed further" translation="网格失败: 生成的元素数量非常大，网格生成器无法再继续"/>
	<label commandName="Sim_IDS_SERVER_ERR704" devLabel="Mesh failed: Vertex failure" translation="网格失败: 顶点故障"/>
	<label commandName="Sim_IDS_SERVER_ERR705" devLabel="Mesh failed: Edge failure" translation="网格失败: 边故障"/>
	<label commandName="Sim_IDS_SERVER_ERR706" devLabel="Mesh failed: Face failure" translation="网格失败: 面故障"/>
	<label commandName="Sim_IDS_SERVER_ERR707" devLabel="Mesh failed: Body failure" translation="网格失败: 实体故障"/>
	<label commandName="Sim_IDS_SERVER_ERR708" devLabel="Mesh failed: Curvature failure" translation="网格失败: 曲率故障"/>
	<label commandName="Sim_IDS_SERVER_ERR8" devLabel="The load is inconsistent with the boundary conditions" translation="载荷与边界条件不一致"/>
	<label commandName="Sim_IDS_SERVER_ERR9" devLabel="Coordinate system is referenced but not defined" translation="引用但未定义坐标系"/>
	<label commandName="Sim_IDS_SIMULATION_LOG_SERVER1" devLabel="Solution time: %ss" translation="求解时间: %ss"/>
	<label commandName="Sim_IDS_SIMULATION_LOG_SERVER2" devLabel="Computed %s frequency modes" translation="已计算 %s 个频率模式"/>
	<label commandName="Sim_IDS_SIMULATION_LOG_SERVER3" devLabel="Soft spring was added" translation="已添加软簧"/>
	<label commandName="Sim_IDS_SIMULATION_LOG_SERVER4" devLabel="Model separates into %s independent groups of bodies" translation="模型分离为 %s 个独立的实体组"/>
	<label commandName="Sim_IDS_SIMULATION_LOG_SERVER5" devLabel="Mesh at contact %s is too coarse" translation="接触 %s 位置的网格过于粗"/>
	<label commandName="Sim_IDS_SIMULATION_LOG_SERVER6" devLabel="Contact %s: direction of the non-bonded edge-to-edge contact can not be determined" translation="接触 %s: 无法确定非粘合边到边接触的方向"/>
	<label commandName="Sim_IDS_SIMULATION_LOG_SERVER7" devLabel="The deformation is large compared to the model size. Please verify that load and constraint settings are appropriately scaled." translation="变形大于模型大小。请验证载荷和约束设置的比例是否适当。"/>
	<label commandName="Sim_IDS_SIMULATION_LOG_SERVER8" devLabel="Number of equations solved: %s" translation="求解的方程数量: %s"/>
	<label commandName="Sim_IDS_SIMULATION_LOG_SERVER9" devLabel="Computed %s buckling modes" translation="已计算 %s 屈曲模式"/>
	<label commandName="Sim_IDS_SIM_ERROR_COMPUTE_MESH" devLabel="Compute mesh before proceeding." translation="请先计算网格，然后再继续。"/>
	<label commandName="Sim_IDS_SIM_ERROR_CONTACTS" devLabel="Compute automatic contacts before proceeding." translation="请先计算自动接触，然后再继续。"/>
	<label commandName="Sim_IDS_SIM_ERROR_DESIGN_PARA_HAS_DEPENDENT" devLabel="One or more parameters in the Parametric Table have dependent objects which are not allowed in the Table, and must be removed: %s" translation="“参数化表”中的一个或多个参数具有从属对象，这些对象不允许在表中存在且必须删除: %s"/>
	<label commandName="Sim_IDS_SIM_ERROR_INVALIDCONSTRAINT" devLabel="Invalid constraint: %s" translation="无效约束: %s"/>
	<label commandName="Sim_IDS_SIM_ERROR_INVALIDLOAD" devLabel="Invalid load: %s" translation="无效载荷: %s"/>
	<label commandName="Sim_IDS_SIM_ERROR_INVALIDSHELL" devLabel="Invalid shell: %s" translation="无效的壳: %s"/>
	<label commandName="Sim_IDS_SIM_ERROR_INVALIDSHELLDEFINITION" devLabel="Invalid shell definition (unconnected lumps/gaps): %s" translation="无效的壳定义(未连接的块/间隙): %s"/>
	<label commandName="Sim_IDS_SIM_ERROR_LOADONFIX" devLabel="All loads are acting on entities which have fixed constraints applied on them" translation="所有载荷均作用于已应用固定约束的实体"/>
	<label commandName="Sim_IDS_SIM_ERROR_MATERIALS" devLabel="Can not run. Some materials are not defined correctly. Please assign a valid override material in the Assign Materials dialog." translation="无法运行。未正确定义某些材料。请在“指定材料”对话框中指定有效的替代材料。"/>
	<label commandName="Sim_IDS_SIM_ERROR_MESH_FAILURE" devLabel="Repair mesh failures before proceeding." translation="请先修复网格问题，然后再继续。"/>
	<label commandName="Sim_IDS_SIM_ERROR_MESH_OUTOFDATE" devLabel="Update mesh before proceeding." translation="请先更新网格，然后再继续。"/>
	<label commandName="Sim_IDS_SIM_ERROR_NOCONSTRAINT" devLabel="No constraint defined." translation="未定义约束。"/>
	<label commandName="Sim_IDS_SIM_ERROR_NOLOAD" devLabel="No load defined." translation="未定义载荷。"/>
</Resource>
