<?xml version="1.0" encoding="utf-8"?><Resource>
	<label commandName="ABL_BAD_EE_START_PT" devLabel="  The fillet/chamfer could not be created at the requested size.&#xA;    Try adjusting the size, deselecting some of the edges (try disabling Tangent Chain), or using multiple separate operations." translation="  无法以请求的大小创建圆角/倒角。&#xA;    请尝试调整大小，取消选择某些边(尝试禁用“相切链”)，或者使用多项单独的操作。"/>
	<label commandName="ABL_BAD_RAD_FCN" devLabel="  The fillet/chamfer could not be created at the requested size.&#xA;    Try adjusting the size, deselecting some of the edges (try disabling Tangent Chain), or using multiple separate operations." translation="  无法以请求的大小创建圆角/倒角。&#xA;    请尝试调整大小，取消选择某些边(尝试禁用“相切链”)，或者使用多项单独的操作。"/>
	<label commandName="ABL_CAP_COMPLEX" devLabel="  The fillet/chamfer could not be created at the requested size. This might be occurring at the ends of the selected edges.&#xA;    Try adjusting the size or using multiple separate operations. Check that the selected edge chain ends at a sensible position, and if not try selecting more edges." translation="  无法以请求的大小创建圆角/倒角。这种情况可能出现在选定边的末端。&#xA;    请尝试调整大小，或者使用多项单独的操作。请检查选定的边链是否结束于合理的位置，以及是否不要尝试选择多条边。"/>
	<label commandName="ABL_CVXTY_VIOLATION" devLabel="  The fillet/chamfer could not be created at the requested size.&#xA;    Try adjusting the size, deselecting some of the edges (try disabling Tangent Chain), or using multiple separate operations." translation="  无法以请求的大小创建圆角/倒角。&#xA;    请尝试调整大小，取消选择某些边(尝试禁用“相切链”)，或者使用多项单独的操作。"/>
	<label commandName="ABL_NO_GEOM_DEGEN" devLabel="  The fillet/chamfer could not be created at the requested size. This might be occurring where the operation turns sharply.&#xA;    Try adjusting the size, deselecting some of the edges (try disabling Tangent Chain), or using multiple separate operations." translation="  无法以请求的大小创建圆角/倒角。这种情况在操作方向转变较为突然的地方可能会发生。&#xA;    请尝试调整大小，取消选择某些边(尝试禁用“相切链”)，或者使用多项单独的操作。"/>
	<label commandName="ABL_NO_GEOM_EE" devLabel="  The fillet/chamfer could not be created at the requested size.&#xA;    Try adjusting the size, deselecting some of the edges (try disabling Tangent Chain), or using multiple separate operations." translation="  无法以请求的大小创建圆角/倒角。&#xA;    请尝试调整大小，取消选择某些边(尝试禁用“相切链”)，或者使用多项单独的操作。"/>
	<label commandName="ABL_NO_GEOM_EF" devLabel="  The fillet/chamfer could not be created at the requested size.&#xA;    Try adjusting the size, deselecting some of the edges (try disabling Tangent Chain), or using multiple separate operations." translation="  无法以请求的大小创建圆角/倒角。&#xA;    请尝试调整大小，取消选择某些边(尝试禁用“相切链”)，或者使用多项单独的操作。"/>
	<label commandName="ABL_NO_GEOM_FF" devLabel="  The fillet/chamfer could not be created at the requested size.&#xA;    Try adjusting the size, deselecting some of the edges (try disabling Tangent Chain), or using multiple separate operations." translation="  无法以请求的大小创建圆角/倒角。&#xA;    请尝试调整大小，取消选择某些边(尝试禁用“相切链”)，或者使用多项单独的操作。"/>
	<label commandName="ABL_NO_GEOM_VE" devLabel="  The fillet/chamfer could not be created at the requested size.&#xA;    Try adjusting the size, deselecting some of the edges (try disabling Tangent Chain), or using multiple separate operations." translation="  无法以请求的大小创建圆角/倒角。&#xA;    请尝试调整大小，取消选择某些边(尝试禁用“相切链”)，或者使用多项单独的操作。"/>
	<label commandName="ABL_NO_GEOM_VF" devLabel="  The fillet/chamfer could not be created at the requested size.&#xA;    Try adjusting the size, deselecting some of the edges (try disabling Tangent Chain), or using multiple separate operations." translation="  无法以请求的大小创建圆角/倒角。&#xA;    请尝试调整大小，取消选择某些边(尝试禁用“相切链”)，或者使用多项单独的操作。"/>
	<label commandName="ABL_RADIUS_BIG" devLabel="  The fillet/chamfer could not be created at the requested size.&#xA;    Try adjusting the size, deselecting some of the edges (try disabling Tangent Chain), or using multiple separate operations." translation="  无法以请求的大小创建圆角/倒角。&#xA;    请尝试调整大小，取消选择某些边(尝试禁用“相切链”)，或者使用多项单独的操作。"/>
	<label commandName="ABL_SMI_NO_START_SOLN" devLabel="  Cannot create fillet from selected faces.&#xA;    Select faces that are adjacent to the center faces." translation="  无法从选定面创建圆角。&#xA;请选择与中心面相邻的面。"/>
	<label commandName="ACIS_EXCEPTION_ACCESS_VIOLATION" devLabel="  The operation failed.&#xA;    Try adjusting the values or changing the input geometry." translation="  操作失败。&#xA;    请尝试调整值或更改输入几何图元。"/>
	<label commandName="ACIS_EXCEPTION_FLT_DIVIDE_BY_ZERO" devLabel="Internal failure." translation="内部错误。"/>
	<label commandName="ADDTANG_PROBLEM" devLabel="  There was a problem processing surface tangency.&#xA;    Try adjusting the values or changing the input geometry." translation="  处理曲面相切时出现问题。&#xA;    请尝试调整值或更改输入几何图元。"/>
	<label commandName="ANTIPARALLEL_END_DERIVATIVES" devLabel="  The loft could not be created.&#xA;    Try changing the inputs, swapping profiles for rails or a centerline, or adjusting the continuity conditions." translation="  无法创建放样。&#xA;    请尝试更改输入，替换轨道或中心线的轮廓，或者调整连续性条件。"/>
	<label commandName="AN_ILLEGAL_SURFACE" devLabel="  Cannot create surface from selected geometry.&#xA;    Adjust the selection set." translation="  无法从选定几何图元创建曲面。&#xA;请调整选择集。"/>
	<label commandName="API_FAILED" devLabel="  The operation failed.&#xA;    Try adjusting the values or changing the input geometry." translation="  操作失败。&#xA;    请尝试调整值或更改输入几何图元。"/>
	<label commandName="ASMERRORMAP_GENERAL_ERROR" devLabel="General modeling error." translation="常规建模错误。"/>
	<label commandName="BAD_BREAKUP" devLabel="  The loft could not be created.&#xA;    Try changing the inputs, swapping profiles for rails or a centerline, or adjusting the continuity conditions." translation="  无法创建放样。&#xA;    请尝试更改输入，替换轨道或中心线的轮廓，或者调整连续性条件。"/>
	<label commandName="BAD_CONTAINMENT" devLabel="  There was a problem combining geometry together.&#xA;    If attempting a Join/Cut/Intersect, try to ensure that the bodies have a clear overlap (problems can occur where faces and edges are nearly coincident)." translation="  将几何图元合并在一起时发生问题。&#xA;    如果尝试执行求并/求差/求交操作，请尝试确保实体具有清晰的重叠(面和边几乎重合的情况下可能存在问题)。"/>
	<label commandName="BAD_LOFT_DIR" devLabel="  One or more profiles have an invalid takeoff direction.&#xA;    Try adjusting the takeoff angle at profiles using direction control." translation="  一个或多个轮廓具有无效的出射方向。&#xA;    请尝试使用方向控件调整轮廓上的出射角度。"/>
	<label commandName="BAD_REQUESTED_CONTINUITY" devLabel="  The loft could not achieve continuity at one or more profiles.&#xA;    Try changing the profile continuity settings." translation="  放样无法在一个或多个轮廓上实现连续。&#xA;    请尝试更改轮廓连续性设置。"/>
	<label commandName="BAD_UV_NET_DIR" devLabel="  The loft would flow in an invalid direction.&#xA;    Try adjusting the continuity settings. If two adjacent profiles are on the same plane, try moving one of these." translation="  放样会沿无效的方向流动。&#xA;    请尝试调整连续性设置。如果两个相邻轮廓位于同一平面上，请尝试移动其中一个轮廓。"/>
	<label commandName="BAD_UV_SKIN_DIR" devLabel="  The loft would flow in an invalid direction.&#xA;    Try adjusting the continuity settings. If two adjacent profiles are on the same plane, try moving one of these." translation="  放样会沿无效的方向流动。&#xA;    请尝试调整连续性设置。如果两个相邻轮廓位于同一平面上，请尝试移动其中一个轮廓。"/>
	<label commandName="BAD_WIRES" devLabel="  The loft could not be created.&#xA;    Try changing the inputs, swapping profiles for rails or a centerline, or adjusting the continuity conditions." translation="  无法创建放样。&#xA;    请尝试更改输入，替换轨道或中心线的轮廓，或者调整连续性条件。"/>
	<label commandName="BAD_WIRE_NORMAL" devLabel="  The loft could not be created.&#xA;    Try changing the inputs, swapping profiles for rails or a centerline, or adjusting the continuity conditions." translation="  无法创建放样。&#xA;    请尝试更改输入，替换轨道或中心线的轮廓，或者调整连续性条件。"/>
	<label commandName="BFTS_OUTPUT_BODY_SELF_INTERSECTS" devLabel="T-Spline surface self-intersects." translation="T-Spline 曲面自交。"/>
	<label commandName="BFTS_TSPL_SURFACE_NOT_SET" devLabel="T-Spline surface is not set." translation="未设置 T-Spline 曲面。"/>
	<label commandName="BL_BAD_VBL_BNDRY" devLabel="  The fillet/chamfer could not be created at the requested size.&#xA;    Try adjusting the size, deselecting some of the edges (try disabling Tangent Chain), or using multiple separate operations." translation="  无法以请求的大小创建圆角/倒角。&#xA;    请尝试调整大小，取消选择某些边(尝试禁用“相切链”)，或者使用多项单独的操作。"/>
	<label commandName="BL_BAD_ZERO_BL_ED" devLabel="  The fillet/chamfer could not be created at the requested size.&#xA;    Try adjusting the size, deselecting some of the edges (try disabling Tangent Chain), or using multiple separate operations." translation="  无法以请求的大小创建圆角/倒角。&#xA;    请尝试调整大小，取消选择某些边(尝试禁用“相切链”)，或者使用多项单独的操作。"/>
	<label commandName="BL_BLEND_TOO_BIG" devLabel="  The fillet/chamfer could not be created at the requested size.&#xA;    Try adjusting the size, deselecting some of the edges (try disabling Tangent Chain), or using multiple separate operations." translation="  无法以请求的大小创建圆角/倒角。&#xA;    请尝试调整大小，取消选择某些边(尝试禁用“相切链”)，或者使用多项单独的操作。"/>
	<label commandName="BL_CANNOT_REORDER" devLabel="  The fillets/chamfers could not be ordered to return a successful solution.&#xA;    Try adjusting the size, removing some existing fillets/chamfers from the model, or manually reordering existing fillet/chamfer operations." translation="  圆角/倒角无法排序以返回成功的解。&#xA;    请尝试调整大小、删除某些现有的圆角/倒角，或者手动对现有圆角/倒角操作进行重排序。"/>
	<label commandName="BL_CHG_PT_COMPLEX_VERT" devLabel="  The fillet/chamfer could not be created at the requested size.&#xA;    Try adjusting the size, deselecting some of the edges (try disabling Tangent Chain), or using multiple separate operations." translation="  无法以请求的大小创建圆角/倒角。&#xA;    请尝试调整大小，取消选择某些边(尝试禁用“相切链”)，或者使用多项单独的操作。"/>
	<label commandName="BL_EMPTY_INT_GRAPH" devLabel="  The fillet/chamfer could not be created at the requested size.&#xA;    Try adjusting the size, deselecting some of the edges (try disabling Tangent Chain), or using multiple separate operations." translation="  无法以请求的大小创建圆角/倒角。&#xA;    请尝试调整大小，取消选择某些边(尝试禁用“相切链”)，或者使用多项单独的操作。"/>
	<label commandName="BL_EMPTY_SHEET" devLabel="  The fillet/chamfer could not be created at the requested size. This might be occurring where the operation turns sharply.&#xA;    Try adjusting the size, deselecting some of the edges (try disabling Tangent Chain), or using multiple separate operations." translation="  无法以请求的大小创建圆角/倒角。这种情况在操作方向转变较为突然的地方可能会发生。&#xA;    请尝试调整大小，取消选择某些边(尝试禁用“相切链”)，或者使用多项单独的操作。"/>
	<label commandName="BL_END_TOO_CMPLX" devLabel="  The fillet/chamfer could not be created at the requested size. This might be occurring at the ends of the selected edges.&#xA;    Try adjusting the size or using multiple separate operations. Check that the selected edge chain ends at a sensible position, and if not try selecting more edges." translation="  无法以请求的大小创建圆角/倒角。这种情况可能出现在选定边的末端。&#xA;    请尝试调整大小，或者使用多项单独的操作。请检查选定的边链是否结束于合理的位置，以及是否不要尝试选择多条边。"/>
	<label commandName="BL_GEOM_CONSTRUCTION_FAILED" devLabel="  The fillet/chamfer could not be created at the requested size.&#xA;    Try adjusting the size, deselecting some of the edges (try disabling Tangent Chain), or using multiple separate operations." translation="  无法以请求的大小创建圆角/倒角。&#xA;    请尝试调整大小，取消选择某些边(尝试禁用“相切链”)，或者使用多项单独的操作。"/>
	<label commandName="BL_INTERNAL_ERR" devLabel="  The fillet/chamfer could not be created at the requested size.&#xA;    Try adjusting the size, deselecting some of the edges (try disabling Tangent Chain), or using multiple separate operations." translation="  无法以请求的大小创建圆角/倒角。&#xA;    请尝试调整大小，取消选择某些边(尝试禁用“相切链”)，或者使用多项单独的操作。"/>
	<label commandName="BL_MITRE_AWRY" devLabel="  The fillet/chamfer could not be created at the requested size.&#xA;    Try adjusting the size, deselecting some of the edges (try disabling Tangent Chain), or using multiple separate operations." translation="  无法以请求的大小创建圆角/倒角。&#xA;    请尝试调整大小，取消选择某些边(尝试禁用“相切链”)，或者使用多项单独的操作。"/>
	<label commandName="BL_MITRE_TOO_CMPLX" devLabel="  The fillet/chamfer could not be created at the requested size.&#xA;    Try adjusting the size, deselecting some of the edges (try disabling Tangent Chain), or using multiple separate operations." translation="  无法以请求的大小创建圆角/倒角。&#xA;    请尝试调整大小，取消选择某些边(尝试禁用“相切链”)，或者使用多项单独的操作。"/>
	<label commandName="BL_NON_MAN_EDVERT" devLabel="  The fillet/chamfer encountered a non-manifold edge or vertex.&#xA;    This is where two separate volumes share an edge or vertex. Look for this condition on your model, and try editing the volumes so that they overlap or have a gap between them." translation="  “圆角/倒角”遇到非流形边或顶点。&#xA;    这是两个独立的体积共享一条边或一个顶点的位置。请在您的模型上寻找满足此条件的位置，然后尝试编辑这两个体积，使其相互重叠或彼此之间存在间隙。"/>
	<label commandName="BL_NO_MATE" devLabel="  The fillet/chamfer could not be created where edges meet at a corner.&#xA;    Try adjusting the size, deselecting some of the edges meeting at sharp corners, or using multiple separate operations." translation="  无法在边汇合于拐角的位置处创建圆角/倒角。&#xA;    请尝试调整大小，取消选择汇合于尖角位置处的某些边，或者使用多项单独的操作。"/>
	<label commandName="BL_NO_SPR_CUR_INT" devLabel="  Some of the newly-created edges could not be intersected.&#xA;    Try adjusting the size, deselecting some of the edges (try disabling Tangent Chain), or using multiple separate operations." translation="  某些新创建的边无法相交。&#xA;    请尝试调整大小，取消选择某些边(尝试禁用“相切链”)，或者使用多项单独的操作。"/>
	<label commandName="BL_NO_VTX_GEOM" devLabel="  The fillet/chamfer could not be created where edges meet at a corner.&#xA;    Check the regions around sharp corners in your edge chain for geometry problems. Try adjusting the size, deselecting some of the edges in these areas, or use multiple separate operations." translation="  无法在边汇合于拐角的位置处创建圆角/倒角。&#xA;    请在您的边链中围绕尖角的区域检查有无几何图元问题。请尝试调整大小，取消选择这些区域中的某些边，或者使用多项单独的操作。"/>
	<label commandName="BL_NO_X_CURVE" devLabel="  The fillet/chamfer could not be created at the requested size.&#xA;    Try adjusting the size, deselecting some of the edges (try disabling Tangent Chain), or using multiple separate operations." translation="  无法以请求的大小创建圆角/倒角。&#xA;    请尝试调整大小，取消选择某些边(尝试禁用“相切链”)，或者使用多项单独的操作。"/>
	<label commandName="BL_POINT_CUR" devLabel="  The fillet/chamfer could not be created at the requested size.&#xA;    Try adjusting the size, deselecting some of the edges (try disabling Tangent Chain), or using multiple separate operations." translation="  无法以请求的大小创建圆角/倒角。&#xA;    请尝试调整大小，取消选择某些边(尝试禁用“相切链”)，或者使用多项单独的操作。"/>
	<label commandName="BL_SETBACK_TOO_LARGE" devLabel="  The fillet/chamfer could not be created where edges meet at a corner.&#xA;    Check the regions around sharp corners in your edge chain for geometry problems. Try deselecting some of the edges in these areas, or use multiple separate operations." translation="  无法在边汇合于拐角的位置处创建圆角/倒角。&#xA;    请在您的边链中围绕尖角的区域检查有无几何图元问题。请尝试取消选择这些区域中的某些边，或者使用多项单独的操作。"/>
	<label commandName="BL_STOP_CMPLX" devLabel="  The fillet/chamfer could not be created at the requested size.&#xA;    Try adjusting the size, deselecting some of the edges (try disabling Tangent Chain), or using multiple separate operations." translation="  无法以请求的大小创建圆角/倒角。&#xA;    请尝试调整大小，取消选择某些边(尝试禁用“相切链”)，或者使用多项单独的操作。"/>
	<label commandName="BL_UNFIN_SHEET" devLabel="  The fillet/chamfer could not be created at the requested size.&#xA;    Try adjusting the size, deselecting some of the edges (try disabling Tangent Chain), or using multiple separate operations." translation="  无法以请求的大小创建圆角/倒角。&#xA;    请尝试调整大小，取消选择某些边(尝试禁用“相切链”)，或者使用多项单独的操作。"/>
	<label commandName="BODY_VERTEX_CRUMBLE" devLabel="  There was a problem combining geometry together.&#xA;    If attempting a Join/Cut/Intersect, try to ensure that the bodies have a clear overlap (problems can occur where faces and edges are nearly coincident)." translation="  将几何图元合并在一起时发生问题。&#xA;    如果尝试执行求并/求差/求交操作，请尝试确保实体具有清晰的重叠(面和边几乎重合的情况下可能存在问题)。"/>
	<label commandName="CANNOT_COMPUTE_TAKEOFF" devLabel="  One or more profiles could not achieve the specified takeoff.&#xA;    For profiles using direction control, try adjusting the takeoff distance or angle, or change the continuity setting to Free." translation="  一个或多个轮廓无法达到指定的出射点。&#xA;    对于使用方向控件的轮廓，请尝试调整出射距离或角度，或者将连续性设置更改为“自由”。"/>
	<label commandName="CANNOT_CORRECT_TWIST" devLabel="  The loft could not be created.&#xA;    Try changing the inputs, swapping profiles for rails or a centerline, or adjusting the continuity conditions." translation="  无法创建放样。&#xA;    请尝试更改输入，替换轨道或中心线的轮廓，或者调整连续性条件。"/>
	<label commandName="CANNOT_EXTEND_SURFACE" devLabel="  The selected edges could not be extended.&#xA;    Try changing the edge selection or extend distance." translation="  无法延伸选定的边。&#xA;    请尝试更改边选择或延伸距离。"/>
	<label commandName="CANNOT_MERGE_WIRE_COEDGES" devLabel="  The loft could not be created.&#xA;    Try changing the inputs, swapping profiles for rails or a centerline, or adjusting the continuity conditions." translation="  无法创建放样。&#xA;    请尝试更改输入，替换轨道或中心线的轮廓，或者调整连续性条件。"/>
	<label commandName="CANNOT_PROCESS_GUIDE" devLabel="  One or more rails could not be proccessed.&#xA;    Try reselecting the rails, or swapping rails to profiles or a centerline." translation="  无法处理一条或多条轨道。&#xA;    请尝试重新选择轨道，或者将轨道替换为轮廓或中心线。"/>
	<label commandName="CANNOT_PROCESS_MAPPING_CURVE" devLabel="  The loft could not map between profiles.&#xA;    Try adjusting the mapping points, or try reselecting the profiles." translation="  放样无法在轮廓之间映射。&#xA;    请尝试调整映射点，或者尝试重新选择轮廓。"/>
	<label commandName="CANNOT_SET_SECTION_NORMAL" devLabel="  The loft could not be created.&#xA;    Try changing the inputs, swapping profiles for rails or a centerline, or adjusting the continuity conditions." translation="  无法创建放样。&#xA;    请尝试更改输入，替换轨道或中心线的轮廓，或者调整连续性条件。"/>
	<label commandName="CENTERLINE_EQUAL_ANCHORS" devLabel="  Two or more profiles intersect the centerline at the same position.&#xA;    Try adjusting the profile positions or centerline shape to avoid this situation." translation="  两个或更多轮廓在相同位置处与中心线相交。&#xA;    请尝试调整轮廓的位置或中心线的形状，以避免出现此情况。"/>
	<label commandName="CENTERLINE_NON_MONOTONIC_ANCHORS" devLabel="  The profiles appear to be in the wrong order.&#xA;    Try changing the order of the profiles." translation="  轮廓的显示顺序错误。&#xA;    请尝试更改轮廓的顺序。"/>
	<label commandName="CENTERLINE_NON_PLANAR_SECTION" devLabel="  A centerline cannot be used for lofts with non-planar profiles.&#xA;    Try removing non-planar profiles, converting the centerline to a rail, or removing the centerline." translation="  无法将中心线用于包含非平面轮廓的放样。&#xA;    请尝试删除非平面轮廓，将该中心线切换为轨道，或者删除中心线。"/>
	<label commandName="CENTERLINE_NOT_G1_CONTINUOUS" devLabel="  The centerline is not a smooth chain.&#xA;    Try modifying the centerline inputs so that all edges are connected with tangent (G1) continuity." translation="  中心线不是平滑的链。&#xA;    请尝试修改中心线输入，以便所有边都通过切线(G1)连续性保持相连。"/>
	<label commandName="CENTERLINE_PATH_AMBIGUOUS" devLabel="  One or more profiles intersect the centerline at multiple positions.&#xA;    Try adjusting the profile positions, or reduce the length of the centerline." translation="  一个或多个轮廓在多个位置处与中心线相交。&#xA;    请尝试调整轮廓位置，或者缩短中心线的长度。"/>
	<label commandName="CENTERLINE_SECTION_ANGLED_TO_PATH" devLabel="  The loft profiles are not perpendicular to the centerline.&#xA;    Try adjusting the centerline or profiles." translation="  放样轮廓与中心线不垂直。&#xA;    请尝试调整中心线或轮廓。"/>
	<label commandName="CENTERLINE_SECTION_DOESNT_CUT_PATH" devLabel="  The centerline does not intersect all profile planes.&#xA;    Try extending the centerline, or adjusting the profiles so that they all intersect the centerline. Also check that the centerline was selected as intended." translation="  中心线未与所有轮廓平面相交。&#xA;    请尝试延伸中心线，或者调整轮廓以使它们全部与中心线相交。此外，请检查选择的中心线是否符合预期。"/>
	<label commandName="CHAIN_PARALLEL_PATH" devLabel="  A region of the path is parallel with the swept profile.&#xA;    Try adjusting the path or rotating the profile. If you are using Parallel orientation, try switching to Perpendicular orientation." translation="  路径区域与扫掠轮廓平行。&#xA;    请尝试调整路径或旋转轮廓。如果使用平行方向，请尝试切换为垂直方向。"/>
	<label commandName="CHECK_BAD_FF_INT" devLabel="Improper face/face intersection." translation="面/面交点不正确。"/>
	<label commandName="COEDGES_NOT_IN_ORDER" devLabel="  The loft could not be created.&#xA;    Try changing the inputs, swapping profiles for rails or a centerline, or adjusting the continuity conditions." translation="  无法创建放样。&#xA;    请尝试更改输入，替换轨道或中心线的轮廓，或者调整连续性条件。"/>
	<label commandName="COINCIDENT_COEDGES" devLabel="  The loft could not be created.&#xA;    Try changing the inputs, swapping profiles for rails or a centerline, or adjusting the continuity conditions." translation="  无法创建放样。&#xA;    请尝试更改输入，替换轨道或中心线的轮廓，或者调整连续性条件。"/>
	<label commandName="COMP_W_DRAFT" devLabel="  Sweeping with a draft angle cannot use a closed path.&#xA;    Try using an open path, or remove the draft angle." translation="  具有拔模斜度的扫掠无法使用闭合路径。&#xA;    请尝试使用开放路径，或者移除拔模斜度。"/>
	<label commandName="CORRUPT_STREAM" devLabel="  The operation failed.&#xA;    Try adjusting the values or changing the input geometry." translation="  操作失败。&#xA;    请尝试调整值或更改输入几何图元。"/>
	<label commandName="CURVE_EVALUATOR_FAILED" devLabel="  The operation failed.&#xA;    Try adjusting the values or changing the input geometry." translation="  操作失败。&#xA;    请尝试调整值或更改输入几何图元。"/>
	<label commandName="DEFORM_DEGENERATE_BEND" devLabel="Body would self-intersect, try increasing Bend Radius or reducing Bend Angle. Use Flip button to quickly change bend direction." translation="实体会自交，请尝试增大“折弯半径”或减小“折弯角度”。使用“反向”按钮可快速更改折弯方向。"/>
	<label commandName="DEFORM_SELF_INTERSECTION" devLabel="Body would self-intersect. Verify inputs." translation="实体可能会自交。请验证输入。"/>
	<label commandName="DEGENERATE_OFFSET" devLabel="  The offset wire is degenerate." translation="  偏移线退化。"/>
	<label commandName="DEV_LOFT_BAD_WIRES" devLabel="  Cannot create lofted flange with non-planar profiles.&#xA;    Select flange profiles that are planar." translation="  无法创建具有非平面轮廓的放样凸缘。&#xA;    请选择平面的凸缘轮廓。"/>
	<label commandName="DEV_LOFT_CANNOT_TRIM" devLabel="  Cannot create lofted flange because it cannot be trimmed.&#xA;    Adjust angles that create extreme transitions between profiles, or switch the Sheet Metal Rule to use a different material." translation="  无法创建放样凸缘，因为无法对其进行修剪。&#xA;    请调整在轮廓之间创建极端过渡的角度，或切换钣金规则以使用其他材料。"/>
	<label commandName="DEV_LOFT_INTERNAL_ERROR" devLabel="  Cannot create lofted flange with the current selection.&#xA;    Adjust the flange settings or select different profiles." translation="  无法使用当前选定对象创建放样凸缘。&#xA;    请调整凸缘设置或选择其他轮廓。"/>
	<label commandName="DEV_LOFT_NOT_IMPLEMENTED" devLabel="  Cannot create lofted flange because the combination of profiles and settings are not compatible.&#xA;    Select straight lines and arcs for Lofted Flange.If spline profiles are required, switch the type to Edge Flange." translation="  无法创建放样凸缘，因为轮廓和设置的组合不兼容。&#xA;    请为放样凸缘选择直线和圆弧。如果需要样条曲线轮廓，请将类型切换为“边凸缘”。"/>
	<label commandName="DEV_LOFT_OVERLAPPING_BEND" devLabel="  Cannot create lofted flange with overlapping bends.&#xA;    Adjust the profile to provide enough clearance for the bend radii, or switch the Sheet Metal Rule to use a thinner material." translation="  无法创建折弯重叠的放样凸缘。&#xA;    请调整轮廓以便为折弯半径提供足够的间隙，或切换钣金规则以使用较薄的材料。"/>
	<label commandName="DISCONNECTED_SHEET" devLabel="  Faces are not edge connected, or contain non-manifold edges." translation="  面不是由边连接而成的，或者包含非流形边。"/>
	<label commandName="DISCONNECTED_WIRE" devLabel="Edges for wire are not connected" translation="导线的边未连接"/>
	<label commandName="DISCONTINUOUS_CURVE" devLabel="  A curve has become discontinuous.&#xA;    Try adjusting the values or changing the input geometry." translation="  曲线变得不连续。&#xA;    请尝试调整值或更改输入几何图元。"/>
	<label commandName="DRAFT_ANALYSIS_FAILED" devLabel="Draft operation failed. Adjust the pull direction, parting tool, faces, or angle." translation="拔模操作失败。请调整开模方向、分模工具、面或角度。"/>
	<label commandName="DRAFT_GEOM_FAILURE" devLabel="Draft operation failed. Adjust the pull direction, parting tool, faces, or angle." translation="拔模操作失败。请调整开模方向、分模工具、面或角度。"/>
	<label commandName="DRAFT_REBLEND_FAILED" devLabel="Draft operation failed. Adjust the pull direction, parting tool, faces, or angle." translation="拔模操作失败。请调整开模方向、分模工具、面或角度。"/>
	<label commandName="DRAFT_REPLACE_FAILED" devLabel="Draft operation failed. Adjust the pull direction, parting tool, faces, or angle." translation="拔模操作失败。请调整开模方向、分模工具、面或角度。"/>
	<label commandName="DR_ANGLE_OR" devLabel="  The taper angle is too large.&#xA;    Try reducing the taper angle  or changing the profile." translation="  扫掠斜角太大。&#xA;    请尝试减小扫掠斜角或更改轮廓。"/>
	<label commandName="EDGECOIN_PROBLEM" devLabel="  There was a problem combining geometry together.&#xA;    If attempting a Join/Cut/Intersect, try to ensure that the bodies have a clear overlap (problems can occur where faces and edges are nearly coincident)." translation="  将几何图元合并在一起时发生问题。&#xA;    如果尝试执行求并/求差/求交操作，请尝试确保实体具有清晰的重叠(面和边几乎重合的情况下可能存在问题)。"/>
	<label commandName="EnableASMLiveEntityCheckOpToolTip" devLabel="Switch on/of ASM live entity check control." translation="开启/关闭 ASM 实时实体检查控件。"/>
	<label commandName="EnableASMLiveEntityCheckOpUserName" devLabel="Enable switch on/of ASM live entity check control" translation="开启/关闭 ASM 实时实体检查控件"/>
	<label commandName="EnableStrictASMLiveEntityCheckOpToolTip" devLabel="Switch on/of Strict ASM live entity check control." translation="开启/关闭 Strict ASM 实时实体检查控件。"/>
	<label commandName="EnableStrictASMLiveEntityCheckOpUserName" devLabel="Enable switch on/of Strict ASM live entity check control" translation="开启/关闭 Strict ASM 实时实体检查控件"/>
	<label commandName="EnclosureExternal" devLabel="No external void has been detected for given inputs. Please try to increase the offset." translation="针对给定输入未检测到外部空隙。请尝试增加偏移量。"/>
	<label commandName="EnclosureInternal" devLabel="No internal void has been detected for given inputs. Consider creating capping surfaces." translation="针对指定输入未检测到内部空隙。请考虑创建封口曲面。"/>
	<label commandName="FACES_MIXED_SIDED" devLabel="   Cannot offset selected faces.&#xA;    Adjust the selection set." translation="   无法偏移选定的面。&#xA;    调整选择集。"/>
	<label commandName="FUS_EXTRUDE_INTERNAL_ERROR" devLabel="  The extrude could not create a valid body.&#xA;    Try changing the profile or extents, or adjust the operation values." translation="  拉伸无法创建有效的实体。&#xA;    请尝试更改轮廓或范围，或者调整操作值。"/>
	<label commandName="FUS_EXTRUDE_NO_FRAME" devLabel="  Cannot calculate extrude frame." translation="  无法计算拉伸框架。"/>
	<label commandName="FUS_EXTRUDE_NO_PROFILE_PLANE" devLabel="  The profile is not planar.&#xA;    Extrude operations can only be performed using planar profiles. Try reselecting the profile geometry." translation="  轮廓不是平面。&#xA;    只能使用平面轮廓执行拉伸操作。请尝试重新选择轮廓几何图元。"/>
	<label commandName="FUS_EXTRUDE_PROFILE_IS_INVALID" devLabel="  The extrude profile is not valid.&#xA;    Try changing the profile." translation="  拉伸轮廓无效。&#xA;    请尝试更改轮廓。"/>
	<label commandName="FUS_EXTRUDE_PROFILE_NOT_SET" devLabel="  The extrude does not have all the required inputs.&#xA;    Try reselecting the inputs." translation="  拉伸不具有所需的全部输入。&#xA;    请尝试重新选择输入。"/>
	<label commandName="FUS_EXTRUDE_PROF_NOT_PLANAR" devLabel="  The profile is not planar.&#xA;    Extrude operations can only be performed using planar profiles. Try reselecting the profiles." translation="  轮廓不是平面。&#xA;    只能使用平面轮廓执行拉伸操作。请尝试重新选择轮廓。"/>
	<label commandName="FUS_EXTRUDE_SELF_INT" devLabel="  The extrude would intersect itself.&#xA;    Try changing the profile or extents, or try creating the shape using multiple operations." translation="  拉伸将会自交。&#xA;    请尝试更改轮廓或范围，或者尝试使用多项操作创建形状。"/>
	<label commandName="FUS_EXTRUDE_START_OFF_OPPOSITE_DIR" devLabel="Unable to create a valid body because a lateral edge starts off of the profile in the opposite direction of the extrude direction." translation="无法创建有效实体，因为侧棱以拉伸方向的反方向从轮廓开始。"/>
	<label commandName="FUS_EXTRUDE_TO_CURVE_NULL" devLabel="  The end of the extrude could not be created.&#xA;    Try changing the profile or taper angle." translation="  无法创建拉伸的终点。&#xA;    请尝试更改轮廓或扫掠斜角。"/>
	<label commandName="FUS_REVOLVEE_START_OFF_OPPOSITE_DIR" devLabel="Unable to create a valid body because a lateral edge starts off of the profile in the opposite direction of the revolve direction." translation="无法创建有效实体，因为横向边以与旋转方向的反方向从轮廓开始。"/>
	<label commandName="FUS_REVOLVE_INTERNAL_ERROR" devLabel="  The revolve could not create a valid body.&#xA;    Try changing the profile or extents, or adjust the operation values." translation="旋转无法创建有效的实体。&#xA;    请尝试更改轮廓或范围，或者调整操作值。"/>
	<label commandName="FUS_REVOLVE_NO_FRAME" devLabel="  Cannot calculate revolve frame." translation="  无法计算旋转框架。"/>
	<label commandName="FUS_REVOLVE_NO_PROFILE_PLANE" devLabel="  The profile is not planar.&#xA;    Revolve operations can only be performed using planar profiles. Try reselecting the profile geometry." translation="  轮廓不是平面。&#xA;    只能使用平面轮廓执行旋转操作。请尝试重新选择轮廓几何图元。"/>
	<label commandName="FUS_REVOLVE_PROFILE_IS_INVALID" devLabel="  The revolve profile is not valid.&#xA;    Try changing the profile." translation="  旋转轮廓无效。&#xA;    请尝试更改轮廓。"/>
	<label commandName="FUS_REVOLVE_PROFILE_NOT_SET" devLabel="  The revolve does not have all the required inputs.&#xA;    Try reselecting the inputs." translation="  旋转不具有所需的全部输入。&#xA;    请尝试重新选择输入。"/>
	<label commandName="FUS_REVOLVE_PROF_NOT_PLANAR" devLabel="  The profile is not planar.&#xA;    Revolve operations can only be performed using planar profiles. Try reselecting the profiles." translation="  轮廓不是平面。&#xA;    只能使用平面轮廓执行旋转操作。请尝试重新选择轮廓。"/>
	<label commandName="FUS_REVOLVE_SELF_INT" devLabel="  The revolve would intersect itself.&#xA;    Try changing the profile or extents, or try creating the shape using multiple operations." translation="  旋转会自交。&#xA;    请尝试更改轮廓或范围，或者尝试使用多项操作创建形状。"/>
	<label commandName="FUS_REVOLVE_TO_CURVE_NULL" devLabel="  The end of the revolve could not be created.&#xA;    Try changing the profile or taper angle." translation="  无法创建旋转的终点。&#xA;    请尝试更改轮廓或扫掠斜角。"/>
	<label commandName="GUIDES_OR_MAPPING_CURVES_INTERSECT" devLabel="  The rails or mapping curves intersect each other.&#xA;    Try changing the rails or adjusting the mapping points between profiles to avoid this." translation="  轨道或映射曲线彼此相交。&#xA;    请尝试更改轨道或者调整轮廓之间的映射点以避免该问题。"/>
	<label commandName="GUIDE_NOT_INTERSECT" devLabel="  The rails do not intersect all profiles.&#xA;    All rails must intersect every profile. If using a single rail, try swapping this to a centerline." translation="  轨道未与所有轮廓相交。&#xA;    所有轨道必须与每个轮廓相交。如果使用一条轨道，请尝试将其替换为中心线。"/>
	<label commandName="GUIDE_NOT_SMOOTH" devLabel="  The rail is not smooth.&#xA;    Try making the rail tangent continuous." translation="  轨道不平滑。&#xA;    请尝试使轨道切线连续。"/>
	<label commandName="IDENTICAL_POSITIONS" devLabel="  The loft could not be created.&#xA;    Try changing the inputs, swapping profiles for rails or a centerline, or adjusting the continuity conditions." translation="  无法创建放样。&#xA;    请尝试更改输入，替换轨道或中心线的轮廓，或者调整连续性条件。"/>
	<label commandName="IG_CURVE_BS3_COI_VERTS" devLabel="  The operation failed due to coincident control points.&#xA;    Try adjusting the values or changing the input geometry." translation="  由于存在重合的控制点，操作失败。&#xA;    请尝试调整值或更改输入几何图元。"/>
	<label commandName="IG_CURVE_BS3_COI_VERTS2" devLabel="Coincident vertices may need to be welded together. Look for vertices where edges are converging together." translation="重合顶点可能需要焊接在一起。请查找边汇合到一起处的顶点。"/>
	<label commandName="IG_CURVE_ILLEGAL" devLabel="  The operation failed due to an illegal curve.&#xA;    Try adjusting the values or changing the inputs." translation="  由于曲线为非法曲线，操作失败。&#xA;    请尝试调整值或更改输入。"/>
	<label commandName="IG_CURVE_IRREGULAR" devLabel="Edges or faces may be crossing. Review in box mode." translation="边或面可能会相交。请在“方体”模式下查看。"/>
	<label commandName="IG_CURVE_MULTIPLE_ISSUES" devLabel="Coincident vertices may need to be welded together. Look for vertices where edges are converging together." translation="重合顶点可能需要焊接在一起。请查找边汇合到一起处的顶点。"/>
	<label commandName="IG_CURVE_NON_G1" devLabel="  The operation failed due to a G1 discontinuity in a curve.&#xA;    Try adjusting the values or changing the input geometry." translation="  由于曲线中存在 G1 不连续性，操作失败。&#xA;    请尝试调整值或更改输入几何图元。"/>
	<label commandName="IG_CURVE_SELF_INTERSECTS" devLabel="Edges or faces may be crossing. Review in box mode." translation="边或面可能会相交。请在“方体”模式下查看。"/>
	<label commandName="IG_CURVE_SELF_INTERSECTS_GENERAL" devLabel="Cannot use self-intersecting geometry.&#xA;    Edit the input geometry to avoid self-intersections or select different geometry and try again." translation="无法使用自交几何图元。&#xA;    编辑输入几何图元以避免自相交，或选择其他几何图元并重试。"/>
	<label commandName="IG_SURFACE_BS3_COI_VERTS" devLabel="Coincident vertices may need to be welded together. Look for vertices where edges are converging together." translation="重合顶点可能需要焊接在一起。请查找边汇合到一起处的顶点。"/>
	<label commandName="IG_SURFACE_IRREGULAR" devLabel="Edges or faces may be crossing. Review in box mode." translation="边或面可能会相交。请在“方体”模式下查看。"/>
	<label commandName="IG_SURFACE_MULTIPLE_ISSUES" devLabel="Edges or faces may be crossing. Review in box mode." translation="边或面可能会相交。请在“方体”模式下查看。"/>
	<label commandName="IG_SURFACE_NON_G0" devLabel="  The operation failed due to a G0 discontinuity in a surface.&#xA;    Try adjusting the values or changing the input geometry." translation="  由于曲面中存在 G0 不连续性，操作失败。&#xA;    请尝试调整值或更改输入几何图元。"/>
	<label commandName="IG_SURFACE_NON_G1" devLabel="  The operation failed due to a G1 discontinuity in a surface.&#xA;    Try adjusting the values or changing the input geometry." translation="  由于曲面中存在 G1 不连续性，操作失败。&#xA;    请尝试调整值或更改输入几何图元。"/>
	<label commandName="IG_SURFACE_PARALLEL_SINGULARITY" devLabel="  The operation failed due to a parallel singularity.&#xA;    Try adjusting the values or changing the input geometry." translation="  由于存在平行奇点，操作失败。&#xA;    请尝试调整值或更改输入几何图元。"/>
	<label commandName="IG_SURFACE_PARALLEL_SINGULARITY2" devLabel="Highlighted surfaces may be self-intersecting. Try modifying shape or Unwelding adjacent edges." translation="亮显的曲面可能自交。请尝试修改形状或取消焊接相邻的边。"/>
	<label commandName="IG_SURFACE_SELF_INTERSECTS" devLabel="  The operation failed due to a self-intersecting surface.&#xA;    Try adjusting the values or changing the input geometry." translation="  由于存在自交曲面，操作失败。&#xA;    请尝试调整值或更改输入几何图元。"/>
	<label commandName="IG_SURFACE_UNTREATABLE_SINGULARITY" devLabel="  The operation failed due to a singularity that couldn't be handled.&#xA;    Try adjusting the values or changing the input geometry." translation="  由于无法处理某个奇点，操作失败&#xA;    请尝试调整值或更改输入几何图元。"/>
	<label commandName="IG_SURFACE_UNTREATABLE_SINGULARITY2" devLabel="Highlighted surfaces may be self-intersecting. Try modifying shape or Unwelding adjacent edges." translation="亮显的曲面可能自交。请尝试修改形状或取消焊接相邻的边。"/>
	<label commandName="ILLEGAL_LOFT_GEOMETRY" devLabel="  Cannot create surface from selected geometry.&#xA;    Adjust the continuity settings for profiles and rails or adjust the selection set. " translation="  无法从选定几何图元创建曲面。&#xA;请调整轮廓和轨道的连续性设置或调整选择集。 "/>
	<label commandName="ILLEGAL_LOFT_OVERCONSTRAINT" devLabel="  The loft has conflicting inputs.&#xA;    Try changing the inputs, or changing continuity settings applied at the profiles or rails." translation="  放样存在输入冲突。&#xA;    请尝试更改输入，或者更改在轮廓或轨道上应用的连续性设置。"/>
	<label commandName="ILLEGAL_POINT_SECTION" devLabel="  There was a problem with one or more of the point profiles.&#xA;    Try changing or removing the point profiles." translation="  一个或多个点轮廓存在问题。&#xA;    请尝试更改或删除点轮廓。"/>
	<label commandName="ILLEGAL_SECTION_COINCIDENCE" devLabel="  Sections have more than one region of coincidence." translation="  截面有多个重合区域。"/>
	<label commandName="ILLEGAL_SURFACE" devLabel="Cannot create T-Spline surface from selected geometry.&#xA;    Adjust the selection set." translation="无法从选定几何图元创建 T-Spline 曲面。&#xA;请调整选择集。"/>
	<label commandName="IMPROPER_SPLIT" devLabel="Cannot use selected geometry as a parting tool. Select an edge or sketch on the body, or a plane that intersects the body, as a parting tool." translation="无法将选定的几何图元用作分模工具。请在实体上选择边或草图，或者选择与实体相交的平面作为分模工具。"/>
	<label commandName="INCONS_FACE" devLabel="  There was a problem combining geometry together.&#xA;    If attempting a Join/Cut/Intersect, try to ensure that the bodies have a clear overlap (problems can occur where faces and edges are nearly coincident)." translation="  将几何图元合并在一起时发生问题。&#xA;    如果尝试执行求并/求差/求交操作，请尝试确保实体具有清晰的重叠(面和边几乎重合的情况下可能存在问题)。"/>
	<label commandName="INCONS_REL" devLabel="Failed to perform boolean operation." translation="无法执行布尔运算。"/>
	<label commandName="INTERNAL_LOFT_ERROR" devLabel="  The loft could not be created.&#xA;    Try changing the inputs, swapping profiles for rails or a centerline, or adjusting the continuity conditions." translation="  无法创建放样。&#xA;    请尝试更改输入，替换轨道或中心线的轮廓，或者调整连续性条件。"/>
	<label commandName="INVALID_AFFINE_TRANSFORM" devLabel="  The operation failed.&#xA;    Try adjusting the values or changing the input geometry." translation="  操作失败。&#xA;    请尝试调整值或更改输入几何图元。"/>
	<label commandName="INVALID_COEDGE_SENSE" devLabel="  The operation could not create a valid result.&#xA;    Try adjusting the values or changing the inputs." translation="  该操作无法创建有效的结果。&#xA;    请尝试调整值或更改输入。"/>
	<label commandName="INVALID_FACE_CONTAINMENT" devLabel="   Cannot offset selected faces.&#xA;    Adjust the offset value, thickness value, or selection set." translation="   无法偏移选定面。&#xA;    请调整偏移值、厚度值或选择集。"/>
	<label commandName="InvalidHelixCurve" devLabel="Failed to generate a valid helix curve" translation="未能生成有效的螺旋曲线"/>
	<label commandName="LAT_CURVE_NULL" devLabel="  The sweep could not create a valid body.&#xA;    Try changing the profile or path, or adjusting the operation values." translation="  扫掠无法创建有效实体。&#xA;    请尝试更改轮廓或路径，或者调整操作值。"/>
	<label commandName="LAT_SURF_INTER" devLabel="  The sweep could not create a valid body.&#xA;    Try changing the profile or path, or adjusting the operation values." translation="  扫掠无法创建有效实体。&#xA;    请尝试更改轮廓或路径，或者调整操作值。"/>
	<label commandName="LAT_SURF_NULL" devLabel="  The sweep could not create a valid body.&#xA;    Try changing the profile or path, or adjusting the operation values." translation="  扫掠无法创建有效实体。&#xA;    请尝试更改轮廓或路径，或者调整操作值。"/>
	<label commandName="LOFT_APPROX_SURF_FAILED" devLabel="  The loft could not be created.&#xA;    Try changing the inputs, swapping profiles for rails or a centerline, or adjusting the continuity conditions." translation="  无法创建放样。&#xA;    请尝试更改输入，替换轨道或中心线的轮廓，或者调整连续性条件。"/>
	<label commandName="LOFT_SDK_BND_SMOOTH_REQUIRE_FACES" devLabel="  Tangent and smooth continuity conditions can only be used at body edges.&#xA;    Try reselecting profiles where you wish to apply tangent or smooth continuity conditions." translation="  切线连续性和平滑连续性条件只能在实体边上使用。&#xA;    请尝试重新选择您要应用切线连续性或平滑连续性的轮廓。"/>
	<label commandName="LOFT_SDK_INCONSISTENT_DEFAULT_MAPPINGS" devLabel="  The loft was unable to map between the profiles.&#xA;    Try changing the profiles." translation="  放样无法在轮廓之间映射。&#xA;    请尝试更改轮廓。"/>
	<label commandName="LOFT_SDK_OUTPUT_BODY_SELF_INTERSECTS" devLabel="  The loft would intersect itself.&#xA;    Try changing the inputs to avoid this. If you wish to build a self-intersecting shape, try building the shape using multiple lofts." translation="  放样会与自身相交。&#xA;    请尝试更改输入以避免这种情况发生。如果您要构建自交形状，请尝试使用多个放样来构建该形状。"/>
	<label commandName="LOFT_SURFACE_SELF_INTERSECTS" devLabel="  The loft would intersect itself.&#xA;    Try changing the inputs to avoid this. If you wish to build a self-intersecting shape, try building the shape using multiple lofts." translation="  放样会与自身相交。&#xA;    请尝试更改输入以避免这种情况发生。如果您要构建自交形状，请尝试使用多个放样来构建该形状。"/>
	<label commandName="LOPT_FREE_EDGE" devLabel="  The operation would create a illegal geometry.&#xA;    Try adjusting the values or changing the input geometry." translation="  该操作将会创建非法几何图元。&#xA;    请尝试调整值或更改输入几何图元。"/>
	<label commandName="LOPT_INTERNAL" devLabel="The operation failed.&#xA;    Try adjusting the values or changing the input geometry." translation="操作失败。&#xA;请尝试调整值或更改输入几何图元。"/>
	<label commandName="LOPT_LAST_SHELL" devLabel="  The shell would remove all faces from the body.&#xA;    Try disabling the Tangent Chain option to select fewer faces. To perform a shell without open faces, you can select the entire body from the browser." translation="  抽壳操作将会从实体中移除所有面。&#xA;    请尝试禁用“相切链”选项以选择较少的面。若要执行不包含开放面的抽壳操作，您可以从浏览器中选择整个实体。"/>
	<label commandName="LOPT_NON_MANIFOLD" devLabel="  The operation would create a non-manifold edge.&#xA;    Try adjusting the values or changing the input geometry." translation="  该操作将会创建非流形边。&#xA;    请尝试调整值或更改输入几何图元。"/>
	<label commandName="LOPT_NO_ORTHO" devLabel="   Cannot offset selected faces.&#xA;    Adjust the offset value, thickness value, or selection set." translation="   无法偏移选定面。&#xA;    请调整偏移值、厚度值或选择集。"/>
	<label commandName="LOPT_SHT_EXT_DISCONNECTED_COEDS" devLabel="  Input coedges are not connected." translation="  输入公共边未连接。"/>
	<label commandName="LOPT_SHT_EXT_NON_PARALLEL_RULINGS" devLabel="  The selected edges could not be extended.&#xA;    Try changing the edge selection." translation="  无法延伸选定的边。&#xA;    请尝试更改边选择。"/>
	<label commandName="LOP_ERR_TOO_LARGE" devLabel="  The selected faces could not be offset within a reasonable tolerance.&#xA;    Try adjusting the offset/thickness value or changing the selection of faces." translation="  选定的面无法在合理的公差范围内偏移。&#xA;    请尝试调整偏移/厚度值或更改面选择。"/>
	<label commandName="LOP_HOL_ALL_OPEN" devLabel="  The shell would remove all faces from the body.&#xA;    Try disabling the Tangent Chain option to select fewer faces. To perform a shell without open faces, you can select the entire body from the browser." translation="  抽壳操作将会从实体中移除所有面。&#xA;    请尝试禁用“相切链”选项以选择较少的面。若要执行不包含开放面的抽壳操作，您可以从浏览器中选择整个实体。"/>
	<label commandName="LOP_HOL_MULTI_SHELL" devLabel="  The selected body appears to have already been shelled.&#xA;    Please check that the body selection is correct, or that the selected body is suitable for shelling." translation="  选定实体似乎已进行抽壳。&#xA;    请检查实体选择是否正确，并确保选定的实体适合抽壳。"/>
	<label commandName="LOP_OFF_BAD_OFFSET" devLabel="   Cannot offset selected faces.&#xA;    Adjust the offset value, thickness value, or selection set." translation="   "/>
	<label commandName="LOP_OFF_NO_SURF" devLabel="   Cannot offset selected faces.&#xA;    Adjust the offset value, thickness value, or selection set." translation="   无法偏移选定面。&#xA;    请调整偏移值、厚度值或选择集。"/>
	<label commandName="LOP_SHT_EXT_BAD_CALL" devLabel="  The selected edges could not be extended.&#xA;    Try changing the edge selection or extend distance." translation="  无法延伸选定的边。&#xA;    请尝试更改边选择或延伸距离。"/>
	<label commandName="LOP_SHT_EXT_BAD_DIST" devLabel="  The extend distance is not valid.&#xA;    Try changing the extend distance." translation="  延伸距离无效。&#xA;    请尝试更改延伸距离。"/>
	<label commandName="LOP_SHT_EXT_BAD_EDGE" devLabel="  The selected edges could not be extended.&#xA;    Try changing the edge selection." translation="  无法延伸选定的边。&#xA;    请尝试更改边选择。"/>
	<label commandName="LOP_SHT_EXT_BAD_EDGE_LIST" devLabel="  The selected edges could not be extended.&#xA;    Try changing the edge selection." translation="  无法延伸选定的边。&#xA;    请尝试更改边选择。"/>
	<label commandName="LOP_SHT_EXT_BAD_INT_EDGE" devLabel="  The selected edges could not be extended.&#xA;    Try changing the edge selection or extend distance." translation="  无法延伸选定的边。&#xA;    请尝试更改边选择或延伸距离。"/>
	<label commandName="LOP_SHT_EXT_BAD_PLANE" devLabel="  The selected edges could not be extended.&#xA;    Try changing the edge selection or extend distance." translation="  The selected edges could not be extended.&#xA;    Try changing the edge selection or extend distance."/>
	<label commandName="LOP_SHT_EXT_BAD_RULINGS" devLabel="  The selected edges could not be extended.&#xA;    Try changing the edge selection or extend distance." translation="  无法延伸选定的边。&#xA;    请尝试更改边选择或延伸距离。"/>
	<label commandName="LOP_SHT_EXT_BAD_SHEET" devLabel="  The selected edges could not be extended.&#xA;    Try changing the edge selection." translation="  无法延伸选定的边。&#xA;    请尝试更改边选择。"/>
	<label commandName="LOP_SHT_EXT_BAD_SURF" devLabel="  The selected edges could not be extended.&#xA;    Try changing the edge selection or extend distance." translation="  无法延伸选定的边。&#xA;    请尝试更改边选择或延伸距离。"/>
	<label commandName="LOP_SHT_EXT_BAD_TRY" devLabel="  The selected edges could not be extended.&#xA;    Try changing the edge selection or extend distance." translation="  无法延伸选定的边。&#xA;    请尝试更改边选择或延伸距离。"/>
	<label commandName="LOP_SHT_EXT_INTERNAL" devLabel="  The selected edges could not be extended.&#xA;    Try changing the edge selection or extend distance." translation="  无法延伸选定的边。&#xA;    请尝试更改边选择或延伸距离。"/>
	<label commandName="LOP_SHT_EXT_NONMANIFOLD" devLabel="  The selected edges could not be extended.&#xA;    Try changing the edge selection or extend distance." translation="  无法延伸选定的边。&#xA;    请尝试更改边选择或延伸距离。"/>
	<label commandName="LOP_SHT_EXT_NO_INT" devLabel="  The extended surface could not be reintersected.&#xA;    Try changing the edge selection or extend distance." translation="  延伸曲面无法重新相交。&#xA;    请尝试更改边选择或延伸距离。"/>
	<label commandName="LOP_SHT_EXT_PERP_DISCONNECTED_COEDS" devLabel="  The selected edges could not be extended.&#xA;    Try changing the edge selection." translation="  无法延伸选定的边。&#xA;    请尝试更改边选择。"/>
	<label commandName="LOP_SHT_EXT_PERP_NON_SMOOTH_COEDS" devLabel="  The selected edges could not be extended.&#xA;    Try changing the edge selection." translation="  无法延伸选定的边。&#xA;    请尝试更改边选择。"/>
	<label commandName="LOP_SHT_EXT_PIPE_SI" devLabel="  The extended surface would intersect itself.&#xA;    Try changing the selection of faces, or reducing the extend distance." translation="  延伸曲面会与自身相交。&#xA;    请尝试更改面选择，或者缩短延伸距离。"/>
	<label commandName="LOP_SHT_EXT_SELF_INT" devLabel="  The extended surface would intersect itself.&#xA;    Try changing the edge selection or reducing the extend distance." translation="  延伸曲面会与自身相交。&#xA;    请尝试更改边选择，或者缩短延伸距离。"/>
	<label commandName="LOP_SHT_EXT_TOO_LARGE" devLabel="  The extend distance is too large for the inputs.&#xA;    Try reducing the extend distance." translation="  延伸距离对于输入而言太大。&#xA;    请尝试缩短延伸距离。"/>
	<label commandName="LOP_SHT_EXT_WRAPS_QUILT" devLabel="  The selected edges could not be extended.&#xA;    Try changing the edge selection or extend distance." translation="  无法延伸选定的边。&#xA;    请尝试更改边选择或延伸距离。"/>
	<label commandName="LOP_TAP_BAD_ANGLE" devLabel="  The taper angle is not valid.&#xA;    Try adjusting the angle value or reselecting the inputs." translation="  扫掠斜角无效。&#xA;    请尝试调整角度值或者重新选择输入。"/>
	<label commandName="LOP_TAP_BAD_PICK" devLabel="Draft operation failed. Adjust the pull direction, parting tool, faces, or angle." translation="拔模操作失败。请调整开模方向、分模工具、面或角度。"/>
	<label commandName="LOP_TAP_BAD_SPLIT" devLabel="Draft operation failed. Adjust the pull direction, parting tool, faces, or angle." translation="拔模操作失败。请调整开模方向、分模工具、面或角度。"/>
	<label commandName="LOP_TAP_NO_SURF" devLabel="  Could not taper surface as requested." translation="  无法按照要求对曲面进行锥化。"/>
	<label commandName="LOP_TWK_BAD_SURFACE" devLabel="  The operation would create an illegal surface.&#xA;    Try adjusting the values or changing the input geometry." translation="  该操作将会创建非法曲面。&#xA;    请尝试调整值或更改输入几何图元。"/>
	<label commandName="LOP_TWK_COMPUTE_FAILED" devLabel="  The operation could not create a valid result.&#xA;    Try adjusting the values or changing the inputs." translation="  该操作无法创建有效的结果。&#xA;    请尝试调整值或更改输入。"/>
	<label commandName="LOP_TWK_FREE_EDGE" devLabel="  The operation could not create a valid result.&#xA;    Try adjusting the values or changing the inputs." translation="  该操作无法创建有效的结果。&#xA;    请尝试调整值或更改输入。"/>
	<label commandName="LOP_TWK_INTERNAL" devLabel="  The operation could not create a valid result.&#xA;    Try adjusting the values or changing the inputs." translation="  该操作无法创建有效的结果。&#xA;    请尝试调整值或更改输入。"/>
	<label commandName="LOP_TWK_MULTIPLE_EDGE" devLabel="  The operation could not create a valid result.&#xA;    Try adjusting the values or changing the input geometry." translation="  该操作无法创建有效的结果。&#xA;    请尝试调整值或更改输入几何图元。"/>
	<label commandName="LOP_TWK_NON_MANIFOLD" devLabel="  The operation would create one or more non-manifold edges.&#xA;    Try adjusting the values or changing the inputs." translation="  该操作将会创建一条或多条非流形边。&#xA;    请尝试调整值或更改输入。"/>
	<label commandName="LOP_TWK_NO_EDGE" devLabel="  The operation could not create a valid result.&#xA;    Try adjusting the values or changing the inputs." translation="  该操作无法创建有效的结果。&#xA;    请尝试调整值或更改输入。"/>
	<label commandName="LOP_TWK_NO_LOOP" devLabel="  The operation could not create a valid result.&#xA;    Try adjusting the values or changing the input geometry." translation="  该操作无法创建有效的结果。&#xA;    请尝试调整值或更改输入几何图元。"/>
	<label commandName="LOP_TWK_NO_VERT" devLabel="  The operation could not create a valid result.&#xA;    Try adjusting the values or changing the inputs." translation="  该操作无法创建有效的结果。&#xA;    请尝试调整值或更改输入。"/>
	<label commandName="LOP_TWK_REBLEND_LOST_TAPER_EDGES" devLabel="  The operation causes taper edges to be lost.&#xA;    Try adjusting the values or changing the inputs." translation="  该操作将会导致锥形边丢失。&#xA;    请尝试调整值或更改输入。"/>
	<label commandName="LOP_TWK_REBLEND_NO_SEED_FACES" devLabel="  No valid input faces are selected.&#xA;    Try reselecting the input faces." translation="  未选择有效的输入面。&#xA;    请尝试重新选择输入面。"/>
	<label commandName="LOP_TWK_TOPOL_CHANGE" devLabel="  The operation would cause a large topology change.&#xA;    Try adjusting the values or changing the input geometry." translation="  该操作将会导致大范围的拓扑更改。&#xA;    请尝试调整值或更改输入几何图元。"/>
	<label commandName="LoftedFlangeNegativeParameter" devLabel="Lofted flange facet control parameter must be a positive value." translation="钣金放样面控制参数必须为正值。"/>
	<label commandName="MAPPING_CURVE_OFFPROFILES" devLabel="  The loft could not be created.&#xA;    Try changing the inputs." translation="  无法创建放样。&#xA;    请尝试更改输入。"/>
	<label commandName="MATH_DOMAIN" devLabel="  The operation failed.&#xA;   Try adjusting the values or changing the input geometry." translation="  操作失败。&#xA;   请尝试调整值或更改输入几何图元。"/>
	<label commandName="MIDSURF_TOO_SMALL_THICKNESS" devLabel="  The body is not thin enough to find the midplane.&#xA;    Try reducing the thickness of the input body." translation="  体不够薄，无法查找中间平面。&#xA;    尝试减少输入体的厚度。"/>
	<label commandName="MISSING_SPAN_INFO" devLabel="  There was a problem combining geometry together.&#xA;    If attempting a Join/Cut/Intersect, try to ensure that the bodies have a clear overlap (problems can occur where faces and edges are nearly coincident)." translation="  将几何图元合并在一起时发生问题。&#xA;    如果尝试执行求并/求差/求交操作，请尝试确保实体具有清晰的重叠(面和边几乎重合的情况下可能存在问题)。"/>
	<label commandName="MITRE_PLANE_ZERO" devLabel="  The sweep could not create a valid body.&#xA;    Try changing the profile or path, or adjusting the operation values." translation="  扫掠无法创建有效实体。&#xA;    请尝试更改轮廓或路径，或者调整操作值。"/>
	<label commandName="MULTIPLE_GUIDE_INTERSECTIONS" devLabel="  One or more rails intersect a profile more than once.&#xA;    Try adjusting the sections or rails to avoid this." translation="  一条或多条轨道与轮廓多次相交。&#xA;    请尝试调整截面或轨道以避免该问题。"/>
	<label commandName="MULTI_LOOP_FACE" devLabel="  One or more profiles have multiple edge loops.&#xA;    Try reselecting the profiles." translation="  一个或多个轮廓具有多个边回路。&#xA;    请尝试重新选择轮廓。"/>
	<label commandName="NON_NEG_LENGTH" devLabel="  Fillet (negative value):&#xA;    Cannot create fillet with a negative value.&#xA;    Adjust the fillet radius to a positive value." translation="  圆角(负值):&#xA;    不能使用负值创建圆角。&#xA;    请将圆角半径调整为正值。"/>
	<label commandName="NON_POS_HEIGHT" devLabel="Unable to create hole.&#xA;Height was negative or zero." translation="无法创建孔。&#xA;高度为负值或零。"/>
	<label commandName="NOT_ALL_SECTIONS_MEET" devLabel="  The loft could not be created.&#xA;    Try changing the inputs, swapping profiles for rails or a centerline, or adjusting the continuity conditions." translation="  无法创建放样。&#xA;    请尝试更改输入，替换轨道或中心线的轮廓，或者调整连续性条件。"/>
	<label commandName="NOT_STITCHABLE_LOFT" devLabel="  The loft could not be created.&#xA;    Try changing the inputs, swapping profiles for rails or a centerline, or adjusting the continuity conditions." translation="  无法创建放样。&#xA;    请尝试更改输入，替换轨道或中心线的轮廓，或者调整连续性条件。"/>
	<label commandName="NO_NORMAL" devLabel="  One or more profiles could not have a normal direction determined.&#xA;    Try reselecting the profiles." translation="  一个或多个轮廓无法确定法线方向。&#xA;    请尝试重新选择轮廓。"/>
	<label commandName="NO_SWEEP_FRAME" devLabel="  Cannot calculate sweep frame." translation="  无法计算扫掠框架。"/>
	<label commandName="NO_TARGET_BODY_FOUND_TO_CUT" devLabel="No target body found to cut or intersect!" translation="未找到要剪切或相交的目标实体！"/>
	<label commandName="NO_X_LAT_TOSUR" devLabel="  The sweep could not create a valid body.&#xA;    Try changing the profile or path, or adjusting the operation values." translation="  扫掠无法创建有效实体。&#xA;    请尝试更改轮廓或路径，或者调整操作值。"/>
	<label commandName="NULL_DELTA" devLabel="  The operation could not create a valid result.&#xA;    Try adjusting the values or changing the inputs." translation="  该操作无法创建有效的结果。&#xA;    请尝试调整值或更改输入。"/>
	<label commandName="NULL_ENTITY" devLabel="  The operation failed.&#xA;    Try adjusting the values or changing the input geometry." translation="  操作失败。&#xA;    请尝试调整值或更改输入几何图元。"/>
	<label commandName="NothingStitched" devLabel="Modeling Error: Nothing has stitched." translation="建模错误: 未进行任何缝合。"/>
	<label commandName="OSCULATING_CURVES" devLabel="  The operation could not create a valid result.&#xA;    Try adjusting the values or changing the inputs." translation="  该操作无法创建有效的结果。&#xA;    请尝试调整值或更改输入。"/>
	<label commandName="OUTSIDE_RANGE" devLabel="  The operation failed.&#xA;    Try adjusting the values or changing the input geometry." translation="  操作失败。&#xA;    请尝试调整值或更改输入几何图元。"/>
	<label commandName="PATH_TANGENT" devLabel="  The path is tangent to the profile.&#xA;    Try adjusting the path or rotating the profile." translation="  路径与轮廓相切。&#xA;    请尝试调整路径或旋转轮廓。"/>
	<label commandName="PATTERN_FEATURES_FACESET_ERROR" devLabel="  The face selection is too complex to pattern.&#xA;    Try adding or removing from the selection." translation="  选定的面太过复杂而无法阵列化。&#xA;    请尝试在选定的面中添加或删除面。"/>
	<label commandName="PATTERN_FEATURES_FAILED_TOOL_SHEET" devLabel="  The selected faces do not form a patternable object.&#xA;    The operation works best when the selected faces form a boss, pocket or hole.&#xA;    Try adding or removing faces from the selection." translation="  选定面未形成可阵列化对象。&#xA;    当选定面形成凸台、型腔或孔时，操作效果最佳。&#xA;    请尝试在选择中添加或删除面。"/>
	<label commandName="PATTERN_FEATURES_NO_PASTE_INT_EDGES" devLabel="  No pattern instances could be intersected with the original body.&#xA;    Try adjusting the pattern settings, or changing the selections." translation="  没有阵列实例可以与原始实体相交。&#xA;    请尝试调整阵列设置或更改选择。"/>
	<label commandName="PATTERN_FEATURES_UNDETERMINED_PASTE_BEHAVIOUR" devLabel="  The pattern could not determine if the selected faces represent a boss, pocket or hole.&#xA;    Try adding or removing faces from the selection." translation="  阵列无法确定选定的面表示凸柱、挖槽还是孔。&#xA;    请尝试在选定的面中添加或删除面。"/>
	<label commandName="PROF_NOT_PLANAR" devLabel="  The profile is not planar.&#xA;    Sweep operations can only be performed using planar profiles. Try reselecting the profiles." translation="  轮廓不是平面。&#xA;    只能使用平面轮廓执行扫掠操作。请尝试重新选择轮廓。"/>
	<label commandName="RAIL_CURVE_NULL" devLabel="  The sweep guide rail is not valid.&#xA;    Try changing the guide rail." translation="  扫掠引导轨道无效。&#xA;    请尝试更改引导轨道。"/>
	<label commandName="RBI_FREE_EDGE" devLabel="  The operation would create an illegal edge.&#xA;    Try adjusting the values or changing the input geometry." translation="  该操作将会创建非法边。&#xA;    请尝试调整值或更改输入几何图元。"/>
	<label commandName="RBI_INTERNAL" devLabel="  The operation failed.&#xA;    Try adjusting the values or changing the input geometry." translation="  操作失败。&#xA;    请尝试调整值或更改输入几何图元。"/>
	<label commandName="RBI_IRREP_FACE_LOOP" devLabel="  The operation could not heal the edited region of the model.&#xA;    Try adjusting the values or changing the input geometry." translation="  该操作无法修复模型中编辑过的区域。&#xA;    请尝试调整值或更改输入几何图元。"/>
	<label commandName="RBI_NON_MANIFOLD" devLabel="  The operation would create a non-manifold body.&#xA;    Try adjusting the values or changing the input geometry." translation="  该操作将会创建非流形实体。&#xA;    请尝试调整值或更改输入几何图元。"/>
	<label commandName="RBI_NO_LUMP_LEFT" devLabel="  The operation does not cause a meaningful shape change.&#xA;    Try adjusting the values or changing the input geometry." translation="  该操作不会导致有意义的形状变化。&#xA;    请尝试调整值或更改输入几何图元。"/>
	<label commandName="RBI_NO_SOLUTION" devLabel="  The operation could not heal the edited region of the model.&#xA;" translation="  该操作无法修复模型的已编辑区域。&#xA;"/>
	<label commandName="RBI_SELF_INT_FACE" devLabel="  The operation would create a self-intersecting face.&#xA;    Try adjusting the values or changing the input geometry." translation="  该操作将会创建自交面。&#xA;    请尝试调整值或更改输入几何图元。"/>
	<label commandName="REBL_AMBIGUOUS" devLabel="  An existing fillet or chamfer could not be reapplied.&#xA;    Try suppressing or deleting existing fillets/chamfers before attempting the operation." translation="  无法重新应用现有的圆角或倒角。&#xA;    请尝试抑制或删除现有的圆角/倒角，然后再尝试执行该操作。"/>
	<label commandName="REBL_GRAPH_FAILED" devLabel="  An existing fillet or chamfer could not be detected.&#xA;    Try suppressing or deleting existing fillets/chamfers before attempting the operation." translation="  无法检测到现有的圆角或倒角。&#xA;    请尝试抑制或删除现有的圆角/倒角，然后再尝试执行该操作。"/>
	<label commandName="REBL_HISTORY_STREAM_CHANGED" devLabel="  The operation could not create a valid result.&#xA;    Try adjusting the values or changing the inputs." translation="  该操作无法创建有效的结果。&#xA;    请尝试调整值或更改输入。"/>
	<label commandName="REBL_REMOVE_FAILED" devLabel="  An existing fillet or chamfer could not be deleted.&#xA;    Try suppressing or deleting existing fillets/chamfers before attempting the operation." translation="  无法删除现有的圆角或倒角。&#xA;    请尝试抑制或删除现有的圆角/倒角，然后再尝试执行该操作。"/>
	<label commandName="REM_BAD_FACE" devLabel="  The selected faces could not be deleted.&#xA;    Ensure that faces are only selected from a single body, and that no duplicate or invalid geometry is included in the selection." translation="  无法删除选定的面。&#xA;    请确保仅从单个实体选择面，并且在选择中不包含重复或无效的几何图元。"/>
	<label commandName="REM_FREE_EDGE" devLabel="  The operation could not create a closed solid.&#xA;    Try adjusting the values or changing the input geometry." translation="  该操作无法创建闭合实体。&#xA;    请尝试调整值或更改输入几何图元。"/>
	<label commandName="REM_LAST_SHELL" devLabel="  The shell would remove all faces from the body.&#xA;    Try disabling the Tangent Chain option to select fewer faces. To perform a shell without open faces, you can select the entire body from the browser." translation="  抽壳操作将会从实体中移除所有面。&#xA;    请尝试禁用“相切链”选项以选择较少的面。若要执行不包含开放面的抽壳操作，您可以从浏览器中选择整个实体。"/>
	<label commandName="REM_NON_MANIFOLD" devLabel="  The operation would create a non-manifold edge.&#xA;    Try adjusting the values or changing the input geometry." translation="  该操作将会创建非流形边。&#xA;    请尝试调整值或更改输入几何图元。"/>
	<label commandName="REM_NO_SOLUTION" devLabel="  The body could not be repaired after deleting faces.&#xA;    Try changing the selection, or use the Delete tool in the Surface workspace to delete geometry without repairing the gap." translation="  删除面后无法修复实体。&#xA;    请尝试更改选择，或使用“曲面”工作空间中的“删除”工具删除几何图元而不修复间隙。"/>
	<label commandName="REM_NO_SOLUTION_RETRY" devLabel="  The body could not be repaired after deleting faces.&#xA;    Try changing the selection, or use the Delete tool in the Surface workspace to delete geometry without repairing the gap." translation="删除面后无法修复实体。&#xA;    请尝试更改选择，或使用“曲面”工作空间中的“删除”工具删除几何图元而不修复间隙。"/>
	<label commandName="REPL_FACE_FAILED" devLabel="  The face(s) could not be replaced.&#xA;    Try changing the face selections. For Edit Face operations, avoid making changes where other faces connect smoothly." translation="  无法替换面。&#xA;    请尝试更改面选择。对于编辑面操作，请避免在其他面可平滑连接的位置进行更改。"/>
	<label commandName="REST_BOOLEAN_PLATFROM_SHORT" devLabel="Some Rest geometry may not be manufacturable.&#xA;Adjust the Extent Type, or check the Plastic Rule assigned to the component." translation="某些支撑台几何图元可能不可制造。&#xA;请调整“范围类型”，或者检查指定给零部件的塑料规则。"/>
	<label commandName="REST_CANNOT_CREATE" devLabel="Cannot create rest feature with the selected solid body and closed sketch profile.&#xA;Adjust the rest settings or select different solid body or closed sketch profile." translation="无法使用选定的实体和封闭的草图轮廓创建支撑台特征。&#xA;请调整支撑台设置或选择其他实体或封闭的草图轮廓。"/>
	<label commandName="RIB BOOLEAN FAIL" devLabel="The Rib cannot be created. Ensure profile curve can intersect body, or flip the direction." translation="无法创建加强筋。请确保轮廓曲线可以贯穿实体，或者翻转方向。"/>
	<label commandName="RIB EXTEND PROFILE FAIL" devLabel="Failed to extend the rib curve. Edit curve or select another." translation="无法延伸加强筋曲线。请编辑曲线或选择其他曲线。"/>
	<label commandName="RIB PROFILE FAIL" devLabel="Failed to create rib. Edit curve or select another." translation="无法创建加强筋。请编辑曲线或选择其他曲线。"/>
	<label commandName="RIB UNKNOW ERROR" devLabel="The rib cannot be created" translation="无法创建加强筋"/>
	<label commandName="RIB WRONG PROFILE" devLabel="The selected curve is closed. Edit curve or select another." translation="选定的曲线已闭合。请编辑曲线或选择其他曲线。"/>
	<label commandName="RIB_ALGO_FAIL" devLabel="The &lt;b&gt;Profile&lt;/b&gt; you selected is not &lt;br&gt;compatible with &lt;b&gt;To Next&lt;/b&gt; extent type.&lt;br&gt;The results may not be manufacturable.&lt;br&gt;&lt;br&gt;Use &lt;b&gt;Distance&lt;/b&gt; extent type or select&lt;br&gt;different profile geometry. " translation="您选择的&lt;b&gt;“轮廓”&lt;/b&gt;与&lt;br&gt;&lt;b&gt;“到下一个”&lt;/b&gt;范围类型不兼容。&lt;br&gt;结果可能不可制造。&lt;br&gt;&lt;br&gt;请使用&lt;b&gt;“距离”&lt;/b&gt;范围类型或选择&lt;br&gt;不同的轮廓几何图元。 "/>
	<label commandName="RIB_DRAFT_FAIL" devLabel="The draft cannot be created." translation="无法创建拔模。"/>
	<label commandName="RibComputeError2" devLabel="Invalid rib wire" translation="加强筋导线无效"/>
	<label commandName="RibComputeError3" devLabel="Invalid rib profile" translation="无效的加强筋轮廓"/>
	<label commandName="RibComputeWarning" devLabel="Fail to draft web!" translation="无法对网状加强筋进行拔模！"/>
	<label commandName="SECTIONS_NEARLY_SMOOTH" devLabel="  The loft could not be created.&#xA;    Try changing the inputs, swapping profiles for rails or a centerline, or adjusting the continuity conditions." translation="  无法创建放样。&#xA;    请尝试更改输入，替换轨道或中心线的轮廓，或者调整连续性条件。"/>
	<label commandName="SELF_INTER" devLabel="  The body would intersect itself.&#xA;    Try reducing the taper angle, or removing regions of high curvature from the profile." translation="  实体将会自交。&#xA;    请尝试减小扫掠斜角，或者从轮廓中删除高曲率的区域。"/>
	<label commandName="SIGINT_FAULT" devLabel="  The operation was canceled.&#xA;" translation="  该操作已取消。&#xA;"/>
	<label commandName="SKIN_NOT_ORIENTED" devLabel="  The loft could not be created.&#xA;    Try changing the inputs, swapping profiles for rails or a centerline, or adjusting the continuity conditions." translation="  无法创建放样。&#xA;    请尝试更改输入，替换轨道或中心线的轮廓，或者调整连续性条件。"/>
	<label commandName="SMIAsmFrRemoveFeaturesNotAllRemoved" devLabel="Not all features were removed" translation="并未删除所有特征"/>
	<label commandName="SMINormalProjection_FailedNoResult" devLabel="Fail to get projected result!" translation="无法获取投影结果！"/>
	<label commandName="SMISweepIntersect_FailedNoResult" devLabel="Fail to get intersected result!" translation="无法获取相交结果！"/>
	<label commandName="SMI_EB_INTERNAL" devLabel="  The fillet/chamfer could not be created at the requested size.&#xA;    Try adjusting the size, deselecting some of the edges (try disabling Tangent Chain), or using multiple separate operations." translation="  无法以请求的大小创建圆角/倒角。&#xA;    请尝试调整大小，取消选择某些边(尝试禁用“相切链”)，或者使用多项单独的操作。"/>
	<label commandName="SMI_EB_INVALID_SEQ" devLabel="  The fillet/chamfer could not be created at the requested size.&#xA;    Try adjusting the size, deselecting some of the edges (try disabling Tangent Chain), or using multiple separate operations." translation="  无法以请求的大小创建圆角/倒角。&#xA;    请尝试调整大小，取消选择某些边(尝试禁用“相切链”)，或者使用多项单独的操作。"/>
	<label commandName="SOLID_NOT_MADE" devLabel="  A solid body could not be created.&#xA;    Try changing the inputs, or changing continuity settings applied at the profiles or rails." translation="  无法创建实体。&#xA;    请尝试更改输入，或者更改在轮廓或轨道上应用的连续性设置。"/>
	<label commandName="STITCH_DID_NOTHING" devLabel="  Nothing has stitched.&#xA;    The stitching algorithm completed without any errors, but did not stitch any edges." translation="  未进行任何缝合。&#xA;    缝合算法已完成且无任何错误，但未缝合任何边。"/>
	<label commandName="STITCH_FAILED" devLabel="  The stitching algorithm failed." translation="  缝合算法失败。"/>
	<label commandName="STITCH_FAILED_INVALID_BODY" devLabel="  The stitching failed because the body after stitching was invalid." translation="  由于缝合后的实体无效，因此缝合失败。"/>
	<label commandName="STITCH_FAILED_LUMP_LUMP_INTERSECTION_CHECK" devLabel="  The stitching failed.&#xA;    Post-stitch checking found that different lumps in the resulting body intersected." translation="  缝合失败。&#xA;    缝合后检查发现所生成实体中的不同块相交。"/>
	<label commandName="SUM_SELF_INTERSECT" devLabel="Cannot use the selected geometry.&#xA;    The selected geometry would intersect itself. Edit the input geometry or select a different input and try again." translation="无法使用选定的几何图元。&#xA;    选定的几何图元将与自身相交。编辑输入几何图元或选择其他输入并重试。"/>
	<label commandName="SWEEP_ACAD_RAIL_DISTANCE_ZERO" devLabel="  The sweep guide rail is not valid.&#xA;    Try changing the guide rail." translation="  扫掠引导轨道无效。&#xA;    请尝试更改引导轨道。"/>
	<label commandName="SWEEP_ACAD_SCALE_MUST_USE_RAIL" devLabel="  The sweep guide rail is not valid.&#xA;    Try changing the guide rail." translation="  扫掠引导轨道无效。&#xA;    请尝试更改引导轨道。"/>
	<label commandName="SWEEP_CANNOT_SPLIT_RAILS" devLabel="  The sweep could not create a valid body.&#xA;    Try changing the profile or path, or adjusting the operation values." translation="  扫掠无法创建有效实体。&#xA;    请尝试更改轮廓或路径，或者调整操作值。"/>
	<label commandName="SWEEP_CANNOT_SPLIT_RAILS2" devLabel="  The sweep could not be created using the specified path and guide rail.&#xA;    If the profile is partway along the path, try moving the profile to the one end of the path." translation="  无法使用指定的路径和引导轨道创建扫掠。&#xA;     如果轮廓位于沿路径的中途位置，请尝试将轮廓移动到路径的一端。"/>
	<label commandName="SWEEP_DRAFT_NON_G1" devLabel="  The path is not smooth.&#xA;    Sweeps with a taper angle must use a tangent continuous path. Try modifying the path inputs or removing the taper angle." translation="  路径不平滑。&#xA;    具有扫掠斜角的扫掠必须使用切线连续路径。请尝试修改路径输入或删除扫掠斜角。"/>
	<label commandName="SWEEP_FACES_INTERSECT" devLabel="  The sweep would intersect itself.&#xA;    Try reducing the size of the profile, removing regions of high curvature from the path, or try creating the shape using multiple operations." translation="  扫掠将会自交&#xA;    请尝试减小轮廓的大小，从路径中删除高曲率的区域，或者尝试使用多项操作创建形状。"/>
	<label commandName="SWEEP_HELIX_SELF_INT" devLabel="  The sweep would intersect itself.&#xA;    Try reducing the size of the profile, removing regions of high curvature from the path, or try creating the shape using multiple operations." translation="  扫掠将会自交&#xA;    请尝试减小轮廓的大小，从路径中删除高曲率的区域，或者尝试使用多项操作创建形状。"/>
	<label commandName="SWEEP_ILLEGAL_SURFACE" devLabel="  The sweep would not create a valid result.&#xA;    Try adjusting the values or changing the input geometry." translation="  扫掠不会创建有效结果。&#xA;    请尝试调整值或更改输入几何图元。"/>
	<label commandName="SWEEP_INTERNAL_ERROR" devLabel="  The sweep could not create a valid body.&#xA;    Try changing the profile or path, or adjusting the operation values." translation="  扫掠无法创建有效实体。&#xA;    请尝试更改轮廓或路径，或者调整操作值。"/>
	<label commandName="SWEEP_INVALID_RESULT" devLabel="  The sweep could not create a valid body.&#xA;    Try changing the profile or path, or adjusting the operation values." translation="  扫掠无法创建有效实体。&#xA;    请尝试更改轮廓或路径，或者调整操作值。"/>
	<label commandName="SWEEP_MITERING_CLOSED_PATH" devLabel="  The sweep encountered a problem at a sharp corner in the path.&#xA;    Try making the profile perpendicular to the path, or use an open path." translation="  扫掠在路径中的尖角处遇到问题。&#xA;    请尝试使轮廓垂直于路径，或者使用开放路径。"/>
	<label commandName="SWEEP_NO_PROFILE_PLANE" devLabel="  The profile is not planar.&#xA;    Sweep operations can only be performed using planar profiles. Try reselecting the profile geometry." translation="  轮廓不是平面。&#xA;    只能使用平面轮廓执行扫掠操作。请尝试重新选择轮廓几何图元。"/>
	<label commandName="SWEEP_PATH_NOT_G1" devLabel="  The path is not smooth.&#xA;    Try modifying the path so that all edges are connected with tangent continuity. To create a swept shape with a sharp edge, try using multiple sweeps." translation="  路径不平滑。&#xA;    请尝试修改路径，以便所有边都通过切线连续性保持相连。若要使用锐边创建扫掠形状，请尝试使用多次扫掠。"/>
	<label commandName="SWEEP_PATH_SEGMENTS_ANTIPARALLEL" devLabel="  Cannot sweep the profile along the selected path because the path geometry may contain segments that are too sharp to sweep along.&#xA;    Adjust the sweep Distance until a valid preview displays to identify where the issue lies along the path, adjust the path geometry, or adjust the size and shape of the profile." translation="无法沿选定路径扫掠轮廓，因为路径几何图元可能包含过于尖锐而无法沿其扫掠的段。&#xA;请调整扫掠距离，直到显示有效预览以标识问题在路径上的位置，调整路径几何图元或调整轮廓的大小和形状。"/>
	<label commandName="SWEEP_PROFILE_IS_INVALID" devLabel="  The sweep profile is not valid.&#xA;    Try changing the profile." translation="  扫掠轮廓无效。&#xA;    请尝试更改轮廓。"/>
	<label commandName="SWEEP_PROFILE_NOT_ON_PATH" devLabel="  The profile could not be intersected with the path.&#xA;    Try changing the profile or path." translation="  轮廓无法与路径相交。&#xA;     请尝试更改轮廓或路径。"/>
	<label commandName="SWEEP_PROFILE_NOT_ON_RAIL" devLabel="  The profile could not be intersected with the rail.&#xA;    Try changing the profile or rail." translation="  轮廓无法与轨道相交。&#xA;    请尝试更改轮廓或轨道。"/>
	<label commandName="SWEEP_PROFILE_NOT_SET" devLabel="  The sweep does not have all the required inputs.&#xA;    Try reselecting the inputs." translation="  没有为扫掠提供所需的全部输入。&#xA;    请尝试重新选择输入。"/>
	<label commandName="SWEEP_PROF_DEGEN_AT_START" devLabel="  The taper angle is too large.&#xA;    Try reducing the taper angle or changing the profile." translation="  扫掠斜角太大。&#xA;    请尝试减小扫掠斜角或更改轮廓。"/>
	<label commandName="SWEEP_SELF_INT" devLabel="  The sweep would intersect itself.&#xA;    Try reducing the size of the profile, removing regions of high curvature from the path, or try creating the shape using multiple operations." translation="  扫掠将会自交&#xA;    请尝试减小轮廓的大小，从路径中删除高曲率的区域，或者尝试使用多项操作创建形状。"/>
	<label commandName="SWEEP_SELF_INTERSECTION" devLabel="  The sweep would intersect itself.&#xA;    Try reducing the size of the profile, removing regions of high curvature from the path, or try creating the shape using multiple operations." translation="  扫掠将会自交&#xA;    请尝试减小轮廓的大小，从路径中删除高曲率的区域，或者尝试使用多项操作创建形状。"/>
	<label commandName="SWEEP_START_OFF_OPPOSITE_DIR" devLabel="Unable to create a valid body because a lateral edge starts off of the profile in the opposite direction of the sweep direction." translation="无法创建有效实体，因为侧棱以扫掠方向的反方向从轮廓开始。"/>
	<label commandName="SWEEP_TWISTEDRAIL_FAILED" devLabel="  The sweep could not be created using the specified path and guide rail.&#xA;    Try changing the path or guide rail." translation="  使用指定的路径和引导轨道无法创建扫掠。&#xA;    请尝试更改路径或引导轨道。"/>
	<label commandName="SWEEP_ZERO_LENGTH" devLabel="  The specified sweep cannot use a closed path.&#xA;    Try using an open path." translation="  指定的扫掠无法使用闭合路径。&#xA;    请尝试使用开放路径。"/>
	<label commandName="StitchOperationFails" devLabel="Modeling Error: Stitch operation failure." translation="建模错误: 缝合操作失败。"/>
	<label commandName="StitchOperationItersectionFail" devLabel="Modeling Error: Post - stitch checking found that different lumps in the resulting body intersected" translation="建模错误: 缝合后检查发现所生成实体中的不同块相交。"/>
	<label commandName="THICKEN_FAILED" devLabel="   Cannot offset selected faces.&#xA;    Adjust the offset value, thickness value, or selection set." translation="   无法偏移选定面。&#xA;    请调整偏移值、厚度值或选择集。"/>
	<label commandName="TOL_LOFT_BREAKUP_FAILED" devLabel="  The loft could not be created.&#xA;    Try changing the inputs, swapping profiles for rails or a centerline, or adjusting the continuity conditions." translation="  无法创建放样。&#xA;    请尝试更改输入，替换轨道或中心线的轮廓，或者调整连续性条件。"/>
	<label commandName="TOO_FEW_COEDGE_LISTS" devLabel="  Invalid rail geometry.&#xA;    Try using an open rail." translation="  轨道几何图元无效。&#xA;    请尝试使用开放轨道。"/>
	<label commandName="TOP_BOT_INTER" devLabel="  The sweep would intersect itself.&#xA;    Try reducing the size of the profile, removing regions of high curvature from the path, or try creating the shape using multiple operations." translation="  扫掠将会自交&#xA;    请尝试减小轮廓的大小，从路径中删除高曲率的区域，或者尝试使用多项操作创建形状。"/>
	<label commandName="TO_CURVE_NULL" devLabel="  The end of the sweep could not be created.&#xA;    Try changing the profile or taper angle." translation="  无法创建扫掠末端。&#xA;    请尝试更改轮廓或扫掠斜角。"/>
	<label commandName="TRIM_SOLID_BODY_FAIL_GEN" devLabel="  Trim tool body failed." translation="  修剪刀具实体失败。"/>
	<label commandName="TRIM_SOLID_BODY_NO_VALID_CELL" devLabel="  There is no geometry as a result of this operation. Tool overlaps the target body or does not intersect with the target body as expected." translation="  此操作未生成任何几何图元。刀具与目标实体重叠，或未按预期与目标实体相交。"/>
	<label commandName="TSPL_SURFACE_NO_COMPONENTS" devLabel="BRep could not be generated from the T-Spline surface." translation="无法从 T-Spline 曲面生成 BRep。"/>
	<label commandName="UNFOLD_INTERNAL_ERROR" devLabel="  The operation could not create a valid result.&#xA;    Try adjusting the values or changing the input geometry." translation="  该操作无法创建有效的结果。&#xA;    请尝试调整值或更改输入几何图元。"/>
	<label commandName="UNFOLD_SELF_INTERSECTION" devLabel="Body would self-intersect. Verify inputs." translation="实体可能会自交。请验证输入。"/>
	<label commandName="Unhandled boundary scenario for the unwrap" devLabel="Cannot emboss near some features.&#xA;There are some features, voids, or holes on the selected face in the target area that prevent the emboss.&#xA;&#xA;Try to create the emboss feature before the existing features in the timeline." translation="无法在某些特征附近凸雕。&#xA;目标区域的选定面上存在阻止凸雕的特征、中空体或孔。&#xA;&#xA;请尝试先创建凸雕特征，然后再创建时间轴中的现有特征。"/>
	<label commandName="VERTEX_GUIDE_RAIL_NOT_ALLOWED" devLabel="  The selected guide rail appears to be a vertex.&#xA;    Try changing the guide rail." translation="  选定的引导轨道可能是顶点。&#xA;    请尝试更改引导轨道。"/>
	<label commandName="ValidateBodySmallFaceEdgeError" devLabel="The removal of small Faces/Edges has created a bad body, changes will be reverted." translation="删除小面/边创建了一个不良实体，将撤消更改。"/>
	<label commandName="ValidateGeometryWithDegenerateCurves" devLabel="Could not create valid geometry with given parameters" translation="无法创建具有给定参数的有效几何图元"/>
	<label commandName="WEB BOOLEAN FAIL" devLabel="The web cannot be created. There is an error when boolean the closed profile." translation="无法创建网状加强筋。对闭合轮廓进行布尔运算时发生错误。"/>
	<label commandName="WEB_BOOLEAN_FAIL" devLabel="Web is required to intersect a body. Change the Depth Options or Extend Curves so the new shape intersects a body." translation="需要网状加强筋才能与实体相交。更改“深度选项”或“延伸曲线”，以使新形状与实体相交。"/>
	<label commandName="WIRES_NOT_ALIGNED" devLabel="  The loft could not be created.&#xA;    Try changing the inputs, swapping profiles for rails or a centerline, or adjusting the continuity conditions." translation="  无法创建放样。&#xA;    请尝试更改输入，替换轨道或中心线的轮廓，或者调整连续性条件。"/>
	<label commandName="WIRE_BRANCHED" devLabel="  The sweep could not create a valid body.&#xA;    Try changing the profile or path, or adjusting the operation values." translation="  扫掠无法创建有效实体。&#xA;    请尝试更改轮廓或路径，或者调整操作值。"/>
	<label commandName="WIRE_SELF_INTERSECTS2" devLabel="The operation could not be completed.&#xA;Avoid self-intersecting inputs and try again." translation="无法完成该操作。&#xA;请避免输入会导致自交的值，然后重试。"/>
	<label commandName="WIRE_X_AXIS" devLabel="  The profile crosses the revolve axis.&#xA;    Try moving the profile, or trimming it along the axis, so that there is no overlap." translation="  轮廓与旋转轴相交。&#xA;    请尝试移动轮廓，或者沿轴修剪轮廓，以便没有重叠。"/>
	<label commandName="WRAP_NO_DEFAULT_ORIENTATION" devLabel="Input profile cannot be handled, try adjusting its position." translation="无法处理输入轮廓，请尝试调整其位置。"/>
	<label commandName="WRAP_NO_WIRE" devLabel="There is no wrapped wire because all the geometry is outside the faces." translation="由于整个几何图元都位于面之外，因此没有缠绕的线。"/>
	<label commandName="ZeroLengthVector" devLabel="Attempt to sweep zero length vector" translation="尝试扫掠零长度矢量"/>
</Resource>