<?xml version="1.0" encoding="utf-8"?><Resource>
	<label commandName="ActivateFlatPattern" devLabel="Activate" translation="激活"/>
	<label commandName="AddBaseFlangeSelection" devLabel="Add" translation="添加"/>
	<label commandName="AddBaseFlangeSelectionButton" devLabel="Add selection set." translation="添加选择集。"/>
	<label commandName="AddContourFlangeJoinSelection" devLabel="Add" translation="添加"/>
	<label commandName="AddContourFlangeJoinSelectionButton" devLabel="Add selection set." translation="添加选择集。"/>
	<label commandName="AddContourFlangeSelection" devLabel="Add" translation="添加"/>
	<label commandName="AddContourFlangeSelectionButton" devLabel="Add selection set." translation="添加选择集。"/>
	<label commandName="AddEdgeFlangeSelection" devLabel="Add" translation="添加"/>
	<label commandName="AddEdgeFlangeSelectionButton" devLabel="Add selection set." translation="添加选择集。"/>
	<label commandName="AddEdgeFlangeSelectionButtonToObject" devLabel="Add selection set&#xA;In 'To Object' mode, only one edge can be selected for the flange." translation="添加选择集&#xA;在“目标对象”模式下，只能为凸缘选择一条边。"/>
	<label commandName="AddHemFlangeSelection" devLabel="Add" translation="添加"/>
	<label commandName="AddHemFlangeSelectionButton" devLabel="Add selection set." translation="添加选择集。"/>
	<label commandName="BaseFlangeInputSelsDesc" devLabel="Select closed sketch profiles or planar faces to create flange." translation="选择闭合的草图轮廓或平整面以创建凸缘。"/>
	<label commandName="BaseFlangeInputSelsLabel" devLabel="Profiles" translation="轮廓"/>
	<label commandName="BaseFlangeInputSelsTooltipTitle" devLabel="Profiles" translation="轮廓"/>
	<label commandName="BaseFlangeOneSideDesc" devLabel="Extrudes a flat sheet metal material to one side of the sketch profile." translation="将平整钣金材料沿草图轮廓的一侧拉伸。"/>
	<label commandName="BaseFlangeOtherSideDesc" devLabel="Extrudes a flat sheet metal material to the opposite side of the sketch profile." translation="将平整钣金材料沿草图轮廓的另一侧拉伸。"/>
	<label commandName="BaseFlangeSymmetricDesc" devLabel="Extrudes a flat sheet metal material evenly on both sides of the sketch profile." translation="将平整钣金材料沿草图轮廓的两侧均匀拉伸。"/>
	<label commandName="BaseFlangeTable" devLabel="Base Flange Table" translation="基础凸缘表"/>
	<label commandName="BaseFlangeTitle" devLabel="Base Flange" translation="基础凸缘"/>
	<label commandName="BendAdjacent" devLabel="Adjacent" translation="相邻"/>
	<label commandName="BendAdjacentDesc" devLabel="Places the bend so that it starts at the selected edge on the flange." translation="放置折弯，使其从凸缘上的选定边开始。"/>
	<label commandName="BendAngleMigration" devLabel="Bend Angle Parameter Migration" translation="折弯角度参数移植"/>
	<label commandName="BendAngleParamMigration" devLabel="In some Bend features, the Bend Angle parameter has been automatically updated to reflect the correct flip condition from older Fusion version. Component geometry is not affected but it is recommended to verify the body and angle parameters for correct output." translation="在某些折弯特征中，“折弯角度”参数已自动更新以反映旧 Fusion 版本中的正确反向条件。零部件几何图元不受影响，但建议验证实体和角度参数以获得正确的输出。"/>
	<label commandName="BendInside" devLabel="Inside" translation="内侧"/>
	<label commandName="BendInsideDesc" devLabel="Places the bend inward, so it starts inside the outer edges of the base and new flange." translation="向内折弯，折弯起点位于基体凸缘和新凸缘的外边缘内侧。"/>
	<label commandName="BendLine" devLabel="Bend Line %1%" translation="折弯线 %1%"/>
	<label commandName="BendOutside" devLabel="Outside" translation="外侧"/>
	<label commandName="BendOutsideDesc" devLabel="Places the bend so it extends beyond the inner edges of the base and new flange." translation="放置折弯，使其延伸到底座和新凸缘的内边缘之外。"/>
	<label commandName="BendRadiusInput" devLabel="Bend Radius" translation="折弯半径"/>
	<label commandName="BendRadiusInputDesc" devLabel="Specifies a distance from the inner surface of the sheet to the center of the bend. This controls how tightly the material bends and affects both strength and appearance." translation="指定从钣材内表面到折弯中心的距离。这一参数将控制材料的折弯紧密度，并影响产品的强度和外观。"/>
	<label commandName="BendReliefDepthDefault" devLabel="" translation=""/>
	<label commandName="BendReliefOverrideOptionsGroup" devLabel="Bend Relief Override" translation="折弯释压替代"/>
	<label commandName="BendReliefRemnant" devLabel="Relief Remnant" translation="释压余量"/>
	<label commandName="BendReliefRemnantDesc" devLabel="Specify the relief remnant value to override the sheet metal rule." translation="指定释压余量值以替代钣金规则。"/>
	<label commandName="BendRowGroupName" devLabel="Bend Line %1%" translation="折弯线 %1%"/>
	<label commandName="BendSelectionCmdInputSelect" devLabel="Select" translation="选择"/>
	<label commandName="BendSelectionCmdInputSelected" devLabel="selected" translation="已选定"/>
	<label commandName="BendTangent" devLabel="Tangent" translation="相切"/>
	<label commandName="BendTangentDesc" devLabel="Places the bend so that it is tangent to the selected edge on the flange." translation="放置折弯，使其与凸缘上的选定边相切。"/>
	<label commandName="BendTrimToBendDesc" devLabel="Trims the material back to a perpendicular cut at the bend zone." translation="将材料修剪到折弯区域的垂直切口。"/>
	<label commandName="BooleanTypeOperation" devLabel="Operation" translation="操作"/>
	<label commandName="CFAgainstExtrudeDistance" devLabel="Distance 2" translation="距离 2"/>
	<label commandName="CFAgainstExtrudeDistanceInputDesc" devLabel="Specify the distance to extrude the selected profile from its center to one side." translation="指定要将选定轮廓从其中心拉伸到一侧的距离。"/>
	<label commandName="CFExtentDirectionType" devLabel="Direction" translation="方向"/>
	<label commandName="CFExtrudeDistanceInpuSideOnetDesc" devLabel="Specify the distance to extrude the selected profile from its center to one side." translation="指定要将选定轮廓从其中心拉伸到一侧的距离。"/>
	<label commandName="CFExtrudeDistanceInput" devLabel="Distance" translation="距离"/>
	<label commandName="CFExtrudeDistanceInputDesc" devLabel="Specify the distance to extrude the selected profile." translation="指定要拉伸选定轮廓的距离。"/>
	<label commandName="CFExtrudeDistanceInputSideOne" devLabel="Distance 1" translation="距离 1"/>
	<label commandName="CS2MEnableDH" devLabel="  Capture Design History  " translation="  捕获设计历史  "/>
	<label commandName="CS2MEnableDHWarningMsg" devLabel="Before you can use the &lt;b&gt;Sheet Metal&lt;/b&gt; tools, you must switch to &lt;b&gt;Parametric Modeling mode&lt;/b&gt;. This will capture the design history as parametric features in the &lt;b&gt;Timeline&lt;/b&gt;. &lt;br&gt;&lt;/br&gt; &lt;br&gt;Capture design history?&lt;/br&gt; &lt;br&gt;&lt;/br&gt;" translation="在使用&lt;b&gt;钣金&lt;/b&gt;工具之前，必须切换到&lt;b&gt;参数化建模模式&lt;/b&gt;。这将在&lt;b&gt;时间轴&lt;/b&gt;中将设计历史捕获为参数化特征。&lt;br&gt;&lt;/br&gt; &lt;br&gt;是否捕获设计历史？&lt;/br&gt; &lt;br&gt;&lt;/br&gt;"/>
	<label commandName="CS2MWarningTitle" devLabel="Parametric Modeling mode" translation="参数化建模模式"/>
	<label commandName="CUT_PASTE_GROUP_WITH_DEP_SMFEATURES_NOTSUPPORTED_TITLE" devLabel="Cannot move group in Browser" translation="无法在浏览器中移动组"/>
	<label commandName="CUT_PASTE_SKETCH_WITH_DEP_SMFEATURES_NOTSUPPORTED" devLabel="Sketches with dependent sheet metal features cannot be moved in the Browser or moved to a group." translation="具有从属钣金特征的草图无法在浏览器中移动或移动到组。"/>
	<label commandName="CUT_PASTE_SKETCH_WITH_DEP_SMFEATURES_NOTSUPPORTED_TITLE" devLabel="Cannot move sketch in Browser" translation="无法在浏览器中移动草图"/>
	<label commandName="Center" devLabel="Center" translation="居中"/>
	<label commandName="CenterDesc" devLabel="Extrudes a flat sheet metal material evenly on both sides of the sketch profile." translation="将平整钣金材料沿草图轮廓的两侧均匀拉伸。"/>
	<label commandName="ChangingDerivedRuleFeatureFailure" devLabel="The original rule was derived from another design. Changing the rule will not affect the bodies that were derived with the rule. It will only affect new Sheet Metal bodies. &#xA;Some features cannot be calculated after the Rule change.  Revert the Rule change or delete the failed feature(s)." translation="原始规则衍生自另一个设计。更改该规则不会影响使用其衍生的实体，只会影响新钣金实体。 &#xA;有些特征在规则更改后无法计算。请还原规则更改或删除失败特征。"/>
	<label commandName="ChangingDerivedRuleNoFailure" devLabel="The original rule was derived from another design. Changing the rule will not affect the bodies that were derived with the rule. It will only affect new Sheet Metal bodies." translation="原始规则衍生自另一个设计。更改该规则不会影响使用其衍生的实体，只会影响新钣金实体。"/>
	<label commandName="ChordToleranceDesc" devLabel="Lets you specify the maximum distance from an arc segment to the chord that spans between its end points to determine the number of facets to create around the bend." translation="用于指定从圆弧段到跨越其端点的弦的最大距离，以确定要围绕折弯创建的面数。"/>
	<label commandName="ChordToleranceInfo" devLabel="Chord Tolerance" translation="弦公差"/>
	<label commandName="ChordToleranceValue" devLabel="Chord Tolerance" translation="弦公差"/>
	<label commandName="ChordToleranceValueDesc" devLabel="Specify the maximum chord distance value to determine the number of facets to create around the bend." translation="指定最大弦距离值以确定要围绕折弯创建的面数。"/>
	<label commandName="CmMKS" devLabel="Centimeter" translation="厘米"/>
	<label commandName="CommandsInsideUnfold" devLabel="You must refold your design before continuing." translation="您必须重新折叠设计，然后再继续。"/>
	<label commandName="ContinueWithSave" devLabel="Continue" translation="继续"/>
	<label commandName="ContourFlangeInputSelsDesc" devLabel="Select sheet metal edges or sketch profiles to create flange." translation="选择钣金边或草图轮廓以创建凸缘。"/>
	<label commandName="ContourFlangeJoinTable" devLabel="Contour Flange Join Table" translation="轮廓凸缘连接表"/>
	<label commandName="ContourFlangeJoinWidth1" devLabel="Distance 1" translation="距离 1"/>
	<label commandName="ContourFlangeJoinWidth2" devLabel="Distance 2" translation="距离 2"/>
	<label commandName="ContourFlangeOneSideDesc" devLabel="Extrudes sheet metal material to one side of the sketch profile." translation="将钣金材料沿草图轮廓的一侧拉伸。"/>
	<label commandName="ContourFlangeOtherSideDesc" devLabel="Extrudes sheet metal material to the opposite side of the sketch profile." translation="将钣金材料沿草图轮廓的另一侧拉伸。"/>
	<label commandName="ContourFlangeSymmetricDesc" devLabel="Extrudes sheet metal material evenly on both sides of the sketch profile." translation="将钣金材料沿草图轮廓的两侧均匀拉伸。"/>
	<label commandName="ContourFlangeTable" devLabel="Contour Flange Table" translation="轮廓凸缘表"/>
	<label commandName="ContourFlangeTitle" devLabel="Contour Flange" translation="轮廓凸缘"/>
	<label commandName="ConvToSMBaseFaceSelection" devLabel="Select a base face to infer body thickness." translation="选择基础面以推断实体厚度。"/>
	<label commandName="ConvertToSheetMetalEdit" devLabel="Edit Feature" translation="编辑特征"/>
	<label commandName="ConvertToSheetMetalMissingBaseFace" devLabel="Missing base face." translation="缺少基础面。"/>
	<label commandName="CopyPasteNotSupportedForSheetMetalBodiesMainMsg" devLabel="Copy and paste of sheet metal bodies is not supported in order to maintain sheet metal rules." translation="为了维护钣金规则，不支持复制并粘贴钣金实体。"/>
	<label commandName="CopyPasteNotSupportedForSheetMetalBodiesSubMsg" devLabel="Copy at the sheet metal component level instead." translation="将改为在钣金零部件级别复制。"/>
	<label commandName="CopyPasteOfSMBodyInUnfoldRefoldModeSubMsg" devLabel="To create a copy of a sheet metal component, refold the model or roll the timeline back to a folded state, then copy at the sheet metal component level." translation="若要创建钣金零部件的副本，请重新折叠模型或将时间轴回滚到折叠状态，然后在钣金零部件级别复制。"/>
	<label commandName="CopyPasteRuleInUnfolRefoldModeMainMsg" devLabel="Sorry, components cannot be copied while a sheet metal body is unfolded." translation="抱歉，钣金实体处于展开状态时无法复制零部件。"/>
	<label commandName="CopyPasteRuleInUnfolRefoldModeSubMsg" devLabel="Refold the model or roll the timeline back to a folded state to copy components." translation="请重新折叠模型或将时间轴回滚到折叠状态以复制零部件。"/>
	<label commandName="CornerAlignedWidthExtents" devLabel="Aligned" translation="对齐"/>
	<label commandName="CornerAlignedWidthExtentsDesc" devLabel="Extends the corner closure along the flange edges, aligned with the edge direction." translation="沿凸缘边延伸拐角闭合，与边方向对齐。"/>
	<label commandName="CornerBendSmooth" devLabel="Smooth" translation="平滑"/>
	<label commandName="CornerBendSmoothDesc" devLabel="Creates a smooth spline transition between the bend edges. Visible in the flat pattern." translation="在折弯边之间创建平滑的样条曲线过渡。在展开模式下可见。"/>
	<label commandName="CornerBendStraightLine" devLabel="Straight Line" translation="直线"/>
	<label commandName="CornerBendStraightLineDesc" devLabel="Creates a straight line transition between the bend zone edges, passing through the corner vertices. Visible in the flat pattern." translation="在折弯区域边之间创建直线过渡，穿过拐角顶点。在展开模式下可见。"/>
	<label commandName="CornerBendTransitionOption" devLabel="Bend Transition" translation="折弯过渡"/>
	<label commandName="CornerBendTransitionOptionDesc" devLabel="" translation=""/>
	<label commandName="CornerBendTrimToBend" devLabel="Trim To Bend" translation="修剪到折弯"/>
	<label commandName="CornerEdgeSelection" devLabel="Edges" translation="边"/>
	<label commandName="CornerEdgeSelectionDesc" devLabel="Select sheet metal edges to adjust the corner." translation="选择钣金边以调整拐角。"/>
	<label commandName="CornerMRUFollowSMRule" devLabel="Follow Sheet Metal Rule" translation="遵循钣金规则"/>
	<label commandName="CornerMRUFollowSMRuleActive" devLabel="Follow Sheet Metal Rule" translation="遵循钣金规则"/>
	<label commandName="CornerMiterGap" devLabel="Miter Gap" translation="斜接间隙"/>
	<label commandName="CornerMiterGapDesc" devLabel="" translation=""/>
	<label commandName="CornerOverrideSeparator" devLabel="Override Separator" translation="替代分隔符"/>
	<label commandName="CornerOverrideSeparatorDesc" devLabel="Override Separator" translation="替代分隔符"/>
	<label commandName="CornerOverrideThreeBendCornerGroup" devLabel="3-Bend Corner Override" translation="3 折弯拐角替代"/>
	<label commandName="CornerOverrideThreeBendCornerGroupDesc" devLabel="Lets you override the relief shape, size, and placement at corners where 3 bends intersect.&#xA;Check to apply overrides. Uncheck to restore the values defined in the Sheet Metal Rule." translation="用于替代 3 个折弯相交的拐角处的释压形状、大小和放置。&#xA;选中该选项可应用替代。取消选中该选项可恢复钣金规则中定义的值。"/>
	<label commandName="CornerOverrideTwoBendCornerGroup" devLabel="2-Bend Corner Override" translation="2 折弯拐角替代"/>
	<label commandName="CornerOverrideTwoBendCornerGroupDesc" devLabel="Lets you override the relief shape, size, and placement at corners where 2 bends intersect.&#xA;Check to apply overrides. Uncheck to restore the values defined in the Sheet Metal Rule." translation="用于替代 2 个折弯相交的拐角处的释压形状、大小和放置。&#xA;选中该选项可应用替代。取消选中该选项可恢复钣金规则中定义的值。"/>
	<label commandName="CornerPerpendicularWidthExtents" devLabel="Perpendicular" translation="垂直"/>
	<label commandName="CornerPerpendicularWidthExtentsDesc" devLabel="Extends the corner closure perpendicular to the flange edges." translation="垂直于凸缘边延伸拐角闭合。"/>
	<label commandName="CornerThreeBendReliefDefaultShapeFullRound" devLabel="Default (Full Round)" translation="默认(全圆角)"/>
	<label commandName="CornerThreeBendReliefDefaultShapeFullRoundDesc" devLabel="The relief shape is defined by a sheet metal rule." translation="释压形状由钣金规则定义。"/>
	<label commandName="CornerThreeBendReliefDefaultShapeIntersection" devLabel="Default (Intersection)" translation="默认(相交)"/>
	<label commandName="CornerThreeBendReliefDefaultShapeIntersectionDesc" devLabel="The relief shape is defined by a sheet metal rule." translation="释压形状由钣金规则定义。"/>
	<label commandName="CornerThreeBendReliefDefaultShapeNoReplacement" devLabel="Default (No Replacement)" translation="默认(无替换)"/>
	<label commandName="CornerThreeBendReliefDefaultShapeNoReplacementDesc" devLabel="The relief shape is defined by a sheet metal rule." translation="释压形状由钣金规则定义。"/>
	<label commandName="CornerThreeBendReliefDefaultShapeRoundWithRadius" devLabel="Default (Round with Radius)" translation="默认(使用半径画圆)"/>
	<label commandName="CornerThreeBendReliefDefaultShapeRoundWithRadiusDesc" devLabel="The relief shape is defined by a sheet metal rule." translation="释压形状由钣金规则定义。"/>
	<label commandName="CornerThreeBendReliefRadius" devLabel="Relief Radius" translation="释压半径"/>
	<label commandName="CornerThreeBendReliefRadiusDesc" devLabel="Specifies the radius of the round bend relief cutout measured in the flat pattern." translation="指定在展开模式下测量的圆形折弯释压切口的半径。"/>
	<label commandName="CornerThreeBendReliefShapeFullRound" devLabel="Full Round" translation="全圆角"/>
	<label commandName="CornerThreeBendReliefShapeFullRoundDesc" devLabel="Extends the flange edges and applies a round fillet at their intersection." translation="延伸凸缘边，在其相交处应用圆形圆角。"/>
	<label commandName="CornerThreeBendReliefShapeIntersection" devLabel="Intersection" translation="交点"/>
	<label commandName="CornerThreeBendReliefShapeIntersectionDesc" devLabel="Extends the flange edges to form a sharp cut at their intersection." translation="延伸凸缘边，在其相交处形成尖锐切口。"/>
	<label commandName="CornerThreeBendReliefShapeNoReplacement" devLabel="No Replacement" translation="无替换"/>
	<label commandName="CornerThreeBendReliefShapeNoReplacementDesc" devLabel="Leaves the corner limited to the intersecting bend zones with no additional bend relief." translation="将拐角限制在相交的折弯区域，没有额外的折弯释压。"/>
	<label commandName="CornerThreeBendReliefShapeRoundWithRadius" devLabel="Round with Radius" translation="使用半径画圆"/>
	<label commandName="CornerThreeBendReliefShapeRoundWithRadiusDesc" devLabel="Extends the flange edges to their intersection and applies a fillet with a specified radius to round the corner." translation="将凸缘边延伸到其相交处，并应用具有指定半径的圆角以使拐角变圆。"/>
	<label commandName="CornerTwoBendReliefDefaultShapeArcWeld" devLabel="Default (Arc Weld)" translation="默认(电弧焊缝)"/>
	<label commandName="CornerTwoBendReliefDefaultShapeArcWeldDesc" devLabel="The relief shape is defined by a sheet metal rule." translation="释压形状由钣金规则定义。"/>
	<label commandName="CornerTwoBendReliefDefaultShapeLaserWeld" devLabel="Default (Laser Weld)" translation="默认(激光焊缝)"/>
	<label commandName="CornerTwoBendReliefDefaultShapeLaserWeldDesc" devLabel="The relief shape is defined by a sheet metal rule." translation="释压形状由钣金规则定义。"/>
	<label commandName="CornerTwoBendReliefDefaultShapeLinearWeld" devLabel="Default (Linear Weld)" translation="默认(线状焊缝)"/>
	<label commandName="CornerTwoBendReliefDefaultShapeLinearWeldDesc" devLabel="The relief shape is defined by a sheet metal rule." translation="释压形状由钣金规则定义。"/>
	<label commandName="CornerTwoBendReliefDefaultShapeRound" devLabel="Default (Round)" translation="默认(圆形)"/>
	<label commandName="CornerTwoBendReliefDefaultShapeRoundDesc" devLabel="The relief shape is defined by a sheet metal rule." translation="释压形状由钣金规则定义。"/>
	<label commandName="CornerTwoBendReliefDefaultShapeSquare" devLabel="Default (Square)" translation="默认(方形)"/>
	<label commandName="CornerTwoBendReliefDefaultShapeSquareDesc" devLabel="The relief shape is defined by a sheet metal rule." translation="释压形状由钣金规则定义。"/>
	<label commandName="CornerTwoBendReliefDefaultShapeTear" devLabel="Default (Tear)" translation="默认(水滴形)"/>
	<label commandName="CornerTwoBendReliefDefaultShapeTearDesc" devLabel="The relief shape is defined by a sheet metal rule." translation="释压形状由钣金规则定义。"/>
	<label commandName="CornerTwoBendReliefDefaultShapeTrimToBend" devLabel="Default (Trim to Bend)" translation="默认(修剪到折弯)"/>
	<label commandName="CornerTwoBendReliefDefaultShapeTrimToBendDesc" devLabel="The relief shape is defined by a sheet metal rule." translation="释压形状由钣金规则定义。"/>
	<label commandName="CornerTwoBendReliefPlacement" devLabel="Relief Placement" translation="释压位置"/>
	<label commandName="CornerTwoBendReliefPlacementDesc" devLabel="" translation=""/>
	<label commandName="CornerTwoBendReliefPlacementIntersection" devLabel="Intersection" translation="交点"/>
	<label commandName="CornerTwoBendReliefPlacementIntersectionDesc" devLabel="Centers the relief shape on the intersection where 2 flanges meet the base flange." translation="使释压形状以 2 个凸缘与基础凸缘相交处的交点为中心。"/>
	<label commandName="CornerTwoBendReliefPlacementTangent" devLabel="Tangent" translation="相切"/>
	<label commandName="CornerTwoBendReliefPlacementTangentDesc" devLabel="Places a rounded relief shape so that it is tangent to the edges of 2 flanges where they meet the base flange." translation="放置圆形释压形状，使其在 2 个凸缘与基础凸缘相交的位置与 2 个凸缘的边相切。"/>
	<label commandName="CornerTwoBendReliefPlacementVertex" devLabel="Vertex" translation="顶点"/>
	<label commandName="CornerTwoBendReliefPlacementVertexDesc" devLabel="Centers the relief shape on the vertex where 2 flanges meet the base flange." translation="将释压形状居中于两个凸缘与基体凸缘相交的顶点处。"/>
	<label commandName="CornerTwoBendReliefShapeArcWeld" devLabel="Arc Weld" translation="电弧焊"/>
	<label commandName="CornerTwoBendReliefShapeArcWeldDesc" devLabel="Creates a blunt notch bend relief with spline edges limited by the bending area." translation="使用样条曲线边创建由折弯区域限制的钝角槽口折弯释压形状。"/>
	<label commandName="CornerTwoBendReliefShapeLaserWeld" devLabel="Laser Weld" translation="激光焊缝"/>
	<label commandName="CornerTwoBendReliefShapeLaserWeldDesc" devLabel="Creates a circular notch bend relief with spline edges limited by the bending area." translation="使用样条曲线边创建由折弯区域限制的圆形槽口折弯释压形状。"/>
	<label commandName="CornerTwoBendReliefShapeLinearWeld" devLabel="Linear Weld" translation="线状焊缝"/>
	<label commandName="CornerTwoBendReliefShapeLinearWeldDesc" devLabel="Creates a V-notch bend relief limited by the bending area." translation="创建由折弯区域限制的 V 形槽口折弯释压形状。"/>
	<label commandName="CornerTwoBendReliefShapeOption" devLabel="Relief Shape" translation="释压形状"/>
	<label commandName="CornerTwoBendReliefShapeOptionDesc" devLabel="" translation=""/>
	<label commandName="CornerTwoBendReliefShapeRound" devLabel="Round" translation="圆形"/>
	<label commandName="CornerTwoBendReliefShapeRoundDesc" devLabel="Creates a circular bend relief of a specified size." translation="创建指定尺寸的圆形折弯释压形状。"/>
	<label commandName="CornerTwoBendReliefShapeSquare" devLabel="Square" translation="方形"/>
	<label commandName="CornerTwoBendReliefShapeSquareDesc" devLabel="Creates a square bend relief of a specified size." translation="创建指定尺寸的方形折弯释压形状。"/>
	<label commandName="CornerTwoBendReliefShapeTear" devLabel="Tear" translation="水滴形"/>
	<label commandName="CornerTwoBendReliefShapeTearDesc" devLabel="Creates no bend relief, so the material is torn at the corner." translation="不创建折弯释压形状，因此材料会在拐角处撕裂。"/>
	<label commandName="CornerTwoBendReliefShapeTrimToBend" devLabel="Trim to Bend" translation="修剪到折弯"/>
	<label commandName="CornerTwoBendReliefShapeTrimToBendDesc" devLabel="Creates a square bend relief limited by the bending area." translation="创建由折弯区域限制的方形折弯释压形状。"/>
	<label commandName="CornerTwoBendReliefSize" devLabel="Relief Size" translation="释压大小"/>
	<label commandName="CornerTwoBendReliefSizeDesc" devLabel="Specifies the size of the bend-relief cutout measured in the flat pattern." translation="指定在展开模式下测量的折弯释压切口的尺寸。"/>
	<label commandName="CornerWidthExtents" devLabel="Width Extents" translation="宽度范围"/>
	<label commandName="CornerWidthExtentsDesc" devLabel="" translation=""/>
	<label commandName="CornerinfoThreeBendReliefShapeOption" devLabel="Relief Shape" translation="释压形状"/>
	<label commandName="CornerinfoThreeBendReliefShapeOptionDesc" devLabel="" translation=""/>
	<label commandName="CreateFlatPatternCmd" devLabel="Create Flat Pattern" translation="创建展开模式"/>
	<label commandName="CutPasteNotSupportedForSheetMetalBodies" devLabel="Cut and paste of a sheet metal body is not supported. The selected sheet metal bodies will not be included in the operation." translation="不支持剪切并粘贴钣金实体。选定的钣金实体将不会包含在操作中。"/>
	<label commandName="DieFormDesc" devLabel="Creates sheet metal flanges that will be formed using a stamping die as the manufacturing method." translation="创建将使用冲压模具作为制造方法而形成的钣金凸缘。"/>
	<label commandName="DieFormInfo" devLabel="Die Form" translation="冲压成型"/>
	<label commandName="Distance" devLabel="Distance" translation="距离"/>
	<label commandName="DistanceTooltip" devLabel="Specifies the overall distance of the flange, centered on the mid-point of the selected edge." translation="指定以所选边缘中点为中心的凸缘总长度。"/>
	<label commandName="DoubleHemDesc" devLabel="Creates a double-folded edge by rolling the material twice, resulting in a layered hem with two internal gaps." translation="通过两次卷绕材料创建双折边，形成带有两个内部间隙的分层折边。"/>
	<label commandName="DoubleHemGap" devLabel="Gap" translation="间隙"/>
	<label commandName="DoubleHemGapDesc" devLabel="Specify the space between layers of sheet metal after folding." translation="指定折弯后钣金各层之间的间距。"/>
	<label commandName="DoubleHemLength" devLabel="Length" translation="长度"/>
	<label commandName="DoubleHemLengthDesc" devLabel="Specifies the distance to extrude the hem from the selected edge." translation="指定从所选边缘拉伸折边的距离。"/>
	<label commandName="DoubleHemSetback" devLabel="Setback" translation="过渡"/>
	<label commandName="DoubleHemSetbackDesc" devLabel="Specifies the distance from the edge to the inner side of the first fold, placed between the connecting edge and the start of the double fold." translation="指定从边缘到第一次折弯内侧的距离，该距离介于连接边缘和双折起点之间。"/>
	<label commandName="DoubleHemType" devLabel="Double" translation="双折边"/>
	<label commandName="EFExtrudeDistanceInput" devLabel="Height" translation="高度"/>
	<label commandName="EFExtrudeDistanceInputDesc" devLabel="Specifies the distance to extrude the flange from the height datum." translation="指定从高度基准拉伸凸缘的距离。"/>
	<label commandName="EdgeExtentsType" devLabel="Extent Type" translation="范围类型"/>
	<label commandName="EdgeFlangeDeleteTooltip" devLabel="Remove edge" translation="删除边"/>
	<label commandName="EdgeFlangeFirstOffset" devLabel="Offset 1" translation="偏移 1"/>
	<label commandName="EdgeFlangeFirstOffsetDesc" devLabel="Specifies the distance from Reference 1 to extend the flange on one side." translation="指定从“参考 1”向一侧延伸凸缘的距离。"/>
	<label commandName="EdgeFlangeFirstOffsetReference" devLabel="Reference 1" translation="参考 1"/>
	<label commandName="EdgeFlangeFirstOffsetReferenceDesc" devLabel="Select a face, point, or plane to define the reference for one side's offset." translation="选择一个面、点或平面，为一侧的偏移定义参考基准。"/>
	<label commandName="EdgeFlangeInputSelsDesc" devLabel="Select sheet metal edges or sketch profiles to create flange." translation="选择钣金边或草图轮廓以创建凸缘。"/>
	<label commandName="EdgeFlangeOption" devLabel="Full Edge" translation="整条边"/>
	<label commandName="EdgeFlangeOptionDesc" devLabel="Creates a flange along the entire length of the selected edge." translation="沿选定边的整个长度创建凸缘。"/>
	<label commandName="EdgeFlangeRef1Tooltip" devLabel="Select reference 1" translation="选择参考 1"/>
	<label commandName="EdgeFlangeRef2Tooltip" devLabel="Select reference 2" translation="选择参考 2"/>
	<label commandName="EdgeFlangeSecondOffset" devLabel="Offset 2" translation="偏移 2"/>
	<label commandName="EdgeFlangeSecondOffsetDesc" devLabel="Specifies the distance from Reference 2 to extend the flange on other side." translation="指定从“参考 2”向另一侧延伸凸缘的距离。"/>
	<label commandName="EdgeFlangeSecondOffsetReference" devLabel="Reference 2" translation="参考 2"/>
	<label commandName="EdgeFlangeSecondOffsetReferenceDesc" devLabel="Select a face, point, or plane to define the reference for other side's offset." translation="选择一个面、点或平面，为另一侧的偏移定义参考基准。"/>
	<label commandName="EdgeFlangeTable" devLabel="Edge Flange Table" translation="边凸缘表"/>
	<label commandName="EdgeFlangeTitle" devLabel="Edge Flange" translation="边凸缘"/>
	<label commandName="EdgeFlangeWidth1" devLabel="Distance 1" translation="距离 1"/>
	<label commandName="EdgeFlangeWidth1Desc" devLabel="Specifies the distance to extend one side of the flange from the mid-point of selected edge." translation="指定从所选边缘中点向凸缘一侧延伸的距离。"/>
	<label commandName="EdgeFlangeWidth2" devLabel="Distance 2" translation="距离 2"/>
	<label commandName="EdgeFlangeWidth2Desc" devLabel="Specifies the distance to extend other side of the flange from the mid-point of selected edge." translation="指定从所选边缘中点向凸缘另一侧延伸的距离。"/>
	<label commandName="EdgeNumberString" devLabel="EdgeNumberString" translation="EdgeNumberString"/>
	<label commandName="EdgeSelDeleteBtn" devLabel="RemoveEdge" translation="RemoveEdge"/>
	<label commandName="EdgeSelRow" devLabel="Edge %1%" translation="边 %1%"/>
	<label commandName="EditBaseFlangeTitle" devLabel="Edit Base Flange" translation="编辑基础凸缘"/>
	<label commandName="EditContourFlangeTitle" devLabel="Edit Contour Flange" translation="编辑轮廓凸缘"/>
	<label commandName="EditEdgeFlangeTitle" devLabel="Edit Edge Flange" translation="编辑边凸缘"/>
	<label commandName="EditFlangeTitle" devLabel="Edit Flange" translation="编辑凸缘"/>
	<label commandName="EditHemFlangeTitle" devLabel="Edit Hem" translation="编辑折边"/>
	<label commandName="EditLoftedFlangeTitle" devLabel="Edit Lofted Flange" translation="编辑放样凸缘"/>
	<label commandName="EditUnfold" devLabel="Edit Unfold" translation="编辑展开"/>
	<label commandName="ErrorsDuringUpdateAllFlats" devLabel="Errors in one or more Flat Patterns." translation="一个或多个展开模式中存在错误。"/>
	<label commandName="ErrorsDuringUpdateFlat" devLabel="Errors in Flat Pattern." translation="展开模式中存在错误。"/>
	<label commandName="ErrorsInFlatDuringSaveMain" devLabel="Saving the design recomputed the flat pattern. There were errors in the recompute of the flat pattern that affect the geometry." translation="保存设计后已重新计算展开模式。展开模式的重新计算中存在影响几何图元的错误。"/>
	<label commandName="ErrorsInFlatDuringSaveSub" devLabel="You can save the design with the errors or cancel the save to check the errors." translation="您可以保存有错误的设计或取消保存以检查错误。"/>
	<label commandName="ExitFlatPatternCmdTT" devLabel="Finish Flat Pattern" translation="完成展开模式"/>
	<label commandName="FaceForFlatten" devLabel="Stationary Face" translation="固定面"/>
	<label commandName="FacetAngleDesc" devLabel="Lets you specify the maximum angle between the end points of each facet to determine the number of facets to create around the bend." translation="用于指定每个面的端点之间的最大角度，以确定要围绕折弯创建的面数。"/>
	<label commandName="FacetAngleInfo" devLabel="Facet Angle" translation="面角度"/>
	<label commandName="FacetAngleValue" devLabel="Facet Angle" translation="面角度"/>
	<label commandName="FacetAngleValueDesc" devLabel="Specify the maximum angle value to determine the number of facets to create around the bend." translation="指定最大角度值以确定要围绕折弯创建的面数。"/>
	<label commandName="FacetControl" devLabel="Facet Control" translation="面控制"/>
	<label commandName="FacetDistanceDesc" devLabel="Lets you specify the maximum distance between the end points of each facet to determine the number of facets to create around the bend." translation="用于指定每个面的端点之间的最大距离，以确定要围绕折弯创建的面数。"/>
	<label commandName="FacetDistanceInfo" devLabel="Facet Distance" translation="面距离"/>
	<label commandName="FacetDistanceValue" devLabel="Facet Distance" translation="面距离"/>
	<label commandName="FacetDistanceValueDesc" devLabel="Specify the maximum facet distance value to determine the number of facets to create around the bend." translation="指定最大面距离值以确定要围绕折弯创建的面数。"/>
	<label commandName="FacetNumberDesc" devLabel="Lets you specify the number of facets to create around the bend." translation="用于指定要围绕折弯创建的面数。"/>
	<label commandName="FacetNumberInfo" devLabel="Facet Number" translation="面数"/>
	<label commandName="FacetNumberValue" devLabel="Facet Number" translation="面数"/>
	<label commandName="FacetNumberValueDesc" devLabel="Specify the number of facets to create around the bend." translation="指定要围绕折弯创建的面数。"/>
	<label commandName="FilterRulesByThickness" devLabel="Show Matching Rules" translation="显示匹配规则"/>
	<label commandName="FlangeAngleInput" devLabel="Angle" translation="角度"/>
	<label commandName="FlangeAngleInputDesc" devLabel="Specifies the angle of the flange limited by plane of selected object." translation="指定由所选对象平面限制的凸缘角度。"/>
	<label commandName="FlangeChainingOption" devLabel="Chain Selection" translation="链选"/>
	<label commandName="FlangeEdgeLabel" devLabel="Edge Label" translation="边标签"/>
	<label commandName="FlangeEdgeSelTable" devLabel="EdgeSelTable" translation="EdgeSelTable"/>
	<label commandName="FlangeEdgeSelectionsGroup" devLabel="Selections" translation="选择"/>
	<label commandName="FlangeExtentDropnDownOptions" devLabel="Flange Extent" translation="凸缘范围"/>
	<label commandName="FlangeInputSels" devLabel="Edges/Profiles" translation="边/轮廓"/>
	<label commandName="FlangeInputSelsDesc" devLabel="Select sheet metal edges or sketch profiles to create flange or hem." translation="选择钣金边或草图轮廓以创建凸缘或折边。"/>
	<label commandName="FlangeMetringOptionInput" devLabel="Miter Corners" translation="斜接拐角"/>
	<label commandName="FlangeMetringOptionInputDesc" devLabel="Miters the corners where sheet metal corners would otherwise overlap." translation="在钣金拐角原本会重叠的位置斜接拐角。"/>
	<label commandName="FlangeTitle" devLabel="Flange" translation="凸缘"/>
	<label commandName="FlangeTypeLabel" devLabel="Type" translation="类型"/>
	<label commandName="FlatAlreadyExistForBodyMain" devLabel="A flat pattern already exists for the selected body." translation="已存在选定实体的展开模式。"/>
	<label commandName="FlatAlreadyExistForBodySub" devLabel="Do you want to activate the existing flat pattern?" translation="是否要激活现有的展开模式？"/>
	<label commandName="FlatAlreadyExistForCompMain" devLabel="The component that contains the selected body already contains a flat pattern." translation="包含选定实体的零部件已包含展开模式。"/>
	<label commandName="FlatAlreadyExistForCompSub" devLabel="A component can contain only one flat pattern. Sheet metal bodies need to be in separate components in order to create flat patterns." translation="零部件只能包含一个展开模式。钣金实体需要位于不同的零部件中才能创建展开模式。"/>
	<label commandName="FlatHemDesc" devLabel="Creates a fold that rests tightly along the connected flange." translation="创建紧贴相连凸缘的折弯。"/>
	<label commandName="FlatHemLength" devLabel="Length" translation="长度"/>
	<label commandName="FlatHemLengthDesc" devLabel="Specifies the distance to extrude the hem from the selected edge." translation="指定从所选边缘拉伸折边的距离。"/>
	<label commandName="FlatHemType" devLabel="Flat" translation="平折边"/>
	<label commandName="FlatPattenFaceSelection" devLabel="Select Stationary face to create Flat Pattern" translation="选择固定面以创建展开模式"/>
	<label commandName="FlatPatternDXFExportCmd" devLabel="Export Flat Pattern as DXF" translation="将展开模式导出为 DXF"/>
	<label commandName="FlatPatternMisaligned" devLabel="This flat pattern appears to be misaligned due to a problem in an earlier version of Fusion. This issue has now been fixed. We suggest deleting and recreating this flat pattern to fix the issue." translation="由于早期版本的 Fusion 中存在问题，导致此展开模式似乎不对齐。该问题现在已修复。建议您删除此展开模式并重新创建以修复该问题。"/>
	<label commandName="FlatPatternName" devLabel="Flat Pattern Name" translation="展开模式名称"/>
	<label commandName="FlipBendDirection" devLabel="Flip Direction" translation="反向"/>
	<label commandName="FlipBendDirectionCI" devLabel="FlipBendDirection%1%" translation="FlipBendDirection%1%"/>
	<label commandName="FlipDirection" devLabel="Flip" translation="反向"/>
	<label commandName="FlipDirectionDesc" devLabel="Flips the flange 180 degrees over the base flange." translation="将凸缘绕基础凸缘翻转 180 度。"/>
	<label commandName="FormingType" devLabel="Forming Type" translation="成形类型"/>
	<label commandName="FusionConvertToSheetMetal" devLabel="Convert to Sheet Metal" translation="转换为钣金"/>
	<label commandName="FusionCornerEdit" devLabel="Edit Feature" translation="编辑特征"/>
	<label commandName="FusionFilletSelection" devLabel="Selection" translation="选择"/>
	<label commandName="FusionJoinByBend" devLabel="Join by bend" translation="通过折弯连接"/>
	<label commandName="FusionJoinByBendEdit" devLabel="Edit Feature" translation="编辑特征"/>
	<label commandName="FusionSelectExtrudeToObject" devLabel="Select face, workplane or workpoint to extend to" translation="选择要延伸到的面、工作平面或工作点"/>
	<label commandName="FusionSheetMetalBend" devLabel="Bend" translation="折弯"/>
	<label commandName="FusionSheetMetalCorner" devLabel="Corner Closure" translation="拐角闭合"/>
	<label commandName="FusionSheetMetalFlange" devLabel="Flange (Base/Edge/Contour)" translation="凸缘(基础/边/轮廓)"/>
	<label commandName="FusionSheetMetalHemFlange" devLabel="Hem" translation="折边"/>
	<label commandName="FusionSheetMetalLoftedFlange" devLabel="Lofted Flange" translation="放样凸缘"/>
	<label commandName="FusionSheetMetalRip" devLabel="Rip" translation="接缝"/>
	<label commandName="FusionSheetMetalRules" devLabel="Sheet Metal Rules" translation="钣金规则"/>
	<label commandName="FusionSheetMetalRulesCopying" devLabel="Your existing sheet metal rules are being copied to the new Shared rules library." translation="您的现有钣金规则将复制到新的共享规则库。"/>
	<label commandName="FusionSheetMetalRulesIntro" devLabel="You can now share your custom sheet metal rules with your hub users." translation="现在，您可以与中心用户共享自定义钣金规则。"/>
	<label commandName="FusionSheetMetalRulesLearnMore" devLabel="Learn More" translation="了解详细信息"/>
	<label commandName="FusionSheetMetalRulesLibrary" devLabel="Sheet Metal Rules Library" translation="钣金规则库"/>
	<label commandName="FusionSheetMetalRulesLibraryName" devLabel="Shared rules" translation="共享规则"/>
	<label commandName="FusionSheetMetalRulesMigrationError" devLabel="We couldn't copy your existing rules to the new Shared rules library because you're currently offline.&#xA;&#xA;Next time you're online, the Shared rules will be updated automatically." translation="由于您当前处于脱机状态，因此我们无法将现有规则复制到新的共享规则库。&#xA;&#xA;当您下次处于联机状态时，共享规则将自动更新。"/>
	<label commandName="FusionSheetMetalRulesTitle" devLabel="New sheet metal rules library" translation="新的钣金规则库"/>
	<label commandName="FusionSheetmetalRefold" devLabel="Refold" translation="重新折叠"/>
	<label commandName="FusionSheetmetalUnfold" devLabel="Unfold" translation="展开"/>
	<label commandName="HectometerMetric" devLabel="Hectometer" translation="百米"/>
	<label commandName="HemBendPositionOption" devLabel="Bend Position" translation="折弯位置"/>
	<label commandName="HemDistanceTooltip" devLabel="Specify the overall distance of the hem, centered on the mid-point of the selected edge." translation="指定折边的总长度，该长度以所选边的中点为中心。"/>
	<label commandName="HemEdgeFlangeFirstOffsetDesc" devLabel="Specifies the distance from Reference 1 to extend the hem on one side." translation="指定从“参考 1”开始在一侧延伸折边的距离。"/>
	<label commandName="HemEdgeFlangeOptionDesc" devLabel="Creates a hem along the entire length of the selected edge." translation="沿所选边的整个长度创建折边。"/>
	<label commandName="HemEdgeFlangeSecondOffsetDesc" devLabel="Specifies the distance from Reference 2 to extend the hem on other side." translation="指定从“参考 2”开始在另一侧延伸折边的距离。"/>
	<label commandName="HemEdgeFlangeWidth1Desc" devLabel="Specify the distance to extend one side of the hem from the mid-point of selected edge." translation="指定从所选边的中点开始，向一侧延伸折边的距离。"/>
	<label commandName="HemEdgeFlangeWidth2Desc" devLabel="Specify the distance to extend other side of the hem from the mid-point of selected edge." translation="指定从所选边的中点开始，向另一侧延伸折边的距离。"/>
	<label commandName="HemFlangeInfo" devLabel="Hem" translation="折边"/>
	<label commandName="HemFlangeInputSels" devLabel="Edges" translation="边"/>
	<label commandName="HemFlangeInputSelsDesc" devLabel="Select sheet metal edges to create hem." translation="选择钣金边缘以创建折边。"/>
	<label commandName="HemFlangeTable" devLabel="Hem Flange Table" translation="折边凸缘表"/>
	<label commandName="HemFlangeTypeDesc" devLabel="Folds a sheet metal edge back onto itself." translation="将钣金边缘折叠回自身。"/>
	<label commandName="HemFlipDirectionDesc" devLabel="Flips the hem 180 degrees over the base flange." translation="将折边绕基础凸缘翻转 180 度。"/>
	<label commandName="HemOverrideRulesOptionInputDesc" devLabel="Changes specific setting values for the new hem.&#xA;Select to apply custom values or deselect to use the Sheet Metal Rule defaults." translation="更改新折边的特定设置值。&#xA;选择以应用自定义值，取消选择则使用钣金规则的默认值。"/>
	<label commandName="HemSymmetricFlangeOptionDesc" devLabel="Creates a hem of a specified distance centered on the mid-point of the selected edge." translation="创建一个指定长度的折边，该折边以所选边的中点为中心。"/>
	<label commandName="HemTwoOffsetFlangeOptionDesc" devLabel="Creates a hem positioned between two selected reference faces, with adjustable offsets from each face." translation="创建一个折边，其位置位于两个选定的参考面之间，并可调整相对于每个面的偏移量。"/>
	<label commandName="HemTwoSideFlangeOptionDesc" devLabel="Creates a hem centered on the mid-point of the selected edge with two adjustable width extents on both sides." translation="创建以选定边的中点为中心且两侧的两个宽度范围可调整的折边。"/>
	<label commandName="HemType" devLabel="Type" translation="类型"/>
	<label commandName="Imperial" devLabel="Foot" translation="英尺"/>
	<label commandName="InchImperial" devLabel="Inch" translation="英寸"/>
	<label commandName="Inches" devLabel="Inches" translation="英寸"/>
	<label commandName="IncludeCenterLine" devLabel="Center Lines" translation="中心线"/>
	<label commandName="IncludeExtentLine" devLabel="Extent Lines" translation="范围线"/>
	<label commandName="InnerFaces" devLabel="Inner Faces" translation="内部面"/>
	<label commandName="InnerFacesDesc" devLabel="Sets the height reference to the intersection on the inner faces of the base flange and the new flange." translation="将高度参考设置为基体凸缘和新凸缘内表面的交线处。"/>
	<label commandName="InvisibleObjectWarningMsg" devLabel="The object that you are creating is not visible. Please toggle visibility in the browser." translation="您创建的对象不可见。请在浏览器中切换可见性。"/>
	<label commandName="JBBendAlignedFaceExtension" devLabel="Aligned" translation="对齐"/>
	<label commandName="JBBendAlignedFaceExtensionDesc" devLabel="Creates join by bend with aligned face extension." translation="通过折弯创建连接，且面延伸对齐。"/>
	<label commandName="JBBendEdgesSelection" devLabel="Edges" translation="边"/>
	<label commandName="JBBendEdgesSelectionDesc" devLabel="Select two sheet metal edges to join separate bodies into one." translation="选择两条钣金边以将分离的实体合并为一个。"/>
	<label commandName="JBBendFaceExtension" devLabel="Face extension" translation="面延伸"/>
	<label commandName="JBBendFaceExtensionDesc" devLabel="Select face extension type." translation="选择面延伸类型。"/>
	<label commandName="JBBendPerpendicularFaceExtension" devLabel="Perpendicular" translation="垂直"/>
	<label commandName="JBBendPerpendicularFaceExtensionDesc" devLabel="Creates join by bend with perpendicular face extension." translation="通过折弯创建连接，且面延伸垂直。"/>
	<label commandName="JBBendRadiusInput" devLabel="Bend radius" translation="折弯半径"/>
	<label commandName="JBBendRadiusInputDesc" devLabel="Specify the bend radius to override the sheet metal rule." translation="指定折弯半径以替代钣金规则。"/>
	<label commandName="JBBendSeparator" devLabel="Separator" translation="分隔符"/>
	<label commandName="LoftedBendRadiusInputDesc" devLabel="Specifies a distance from the inner surface of the sheet to the center of the bend. This controls how tightly the material bends and affects both strength and appearance." translation="指定从钣材内表面到折弯中心的距离。这一参数将控制材料的折弯紧密度，并影响产品的强度和外观。"/>
	<label commandName="LoftedFlangeChainingOptionDesc" devLabel="Selects connected chains of geometry automatically." translation="自动选择相连的几何图元链。"/>
	<label commandName="LoftedFlangeInfo" devLabel="Lofted Flange" translation="放样凸缘"/>
	<label commandName="LoftedFlangeInputSels" devLabel="Profiles" translation="轮廓"/>
	<label commandName="LoftedFlangeTypeDesc" devLabel="Creates a complex sheet metal shape." translation="创建复杂的钣金形状。"/>
	<label commandName="LoftedOverrideRulesOptionInputDesc" devLabel="Changes specific setting values for the new flange.&#xA;Select to apply custom values or deselect to use the Sheet Metal Rule defaults." translation="更改新凸缘的特定设置值。&#xA;选择以应用自定义值，或取消选择以使用钣金规则默认值。"/>
	<label commandName="MMKS" devLabel="Meter" translation="米"/>
	<label commandName="MicronMetric" devLabel="Micron" translation="微米"/>
	<label commandName="MilImperial" devLabel="Mil" translation="密耳"/>
	<label commandName="MileImperial" devLabel="Mile" translation="英里"/>
	<label commandName="Millimeters" devLabel="Millimeters" translation="毫米"/>
	<label commandName="MmMKS" devLabel="Millimeter" translation="毫米"/>
	<label commandName="NewBodyInNewCompType" devLabel="New Component" translation="新建零部件"/>
	<label commandName="NewBodyInNewCompTypeDesc" devLabel="Creates a new sheet metal body in a separate component." translation="在单独的零部件中创建新的钣金实体。"/>
	<label commandName="NewBodyType" devLabel="New Body" translation="新建实体"/>
	<label commandName="NewBodyTypeDesc" devLabel="Creates a separate sheet metal body within the active component." translation="在激活的零部件内创建单独的钣金实体。"/>
	<label commandName="NoteForThicknessChanged" devLabel="Note: Thickness will be changed to " translation="注意: 厚度将更改为 "/>
	<label commandName="OODFlatsWillBeUpdated" devLabel="Saving the design updates any flat patterns that are out-of-date." translation="保存设计后将更新所有已过期的展开模式。"/>
	<label commandName="Ok" devLabel="OK" translation="确定"/>
	<label commandName="OneSide" devLabel="Side 1" translation="侧 1"/>
	<label commandName="OneSideDesc" devLabel="Extrudes a flat sheet metal material to one side of the sketch profile." translation="将平整钣金材料沿草图轮廓的一侧拉伸。"/>
	<label commandName="OneSideExtent" devLabel="One Side" translation="一侧"/>
	<label commandName="OneSideExtentDesc" devLabel="Extrudes flange on one side of the profile plane." translation="在轮廓平面的一侧拉伸凸缘。"/>
	<label commandName="OpenHemDesc" devLabel="Creates a fold with a small gap between the edge and connecting flange." translation="创建折弯时，在边缘与相连凸缘之间保留微小间隙。"/>
	<label commandName="OpenHemGap" devLabel="Gap" translation="间隙"/>
	<label commandName="OpenHemGapDesc" devLabel="Specify the space between layers of sheet metal after folding." translation="指定折弯后钣金各层之间的间距。"/>
	<label commandName="OpenHemLength" devLabel="Length" translation="长度"/>
	<label commandName="OpenHemLengthDesc" devLabel="Specifies the distance to extrude the hem from the selected edge." translation="指定从所选边缘拉伸折边的距离。"/>
	<label commandName="OpenHemType" devLabel="Open" translation="打开"/>
	<label commandName="Orientation" devLabel="Orientation" translation="方向"/>
	<label commandName="OtherSide" devLabel="Side 2" translation="侧 2"/>
	<label commandName="OtherSideDesc" devLabel="Extrudes a flat sheet metal material to the opposite side of the sketch profile." translation="将平整钣金材料沿草图轮廓的另一侧拉伸。"/>
	<label commandName="OuterFaces" devLabel="Outer Faces" translation="外部面"/>
	<label commandName="OuterFacesDesc" devLabel="Sets the height reference to the intersection on the outer faces of the base flange and the new flange." translation="将高度参考设置为基体凸缘和新凸缘外表面的交线处。"/>
	<label commandName="OverrideBendReliefGroup" devLabel="Bend Relief Override" translation="折弯释压替代"/>
	<label commandName="OverrideBendReliefGroupDesc" devLabel="Lets you override the relief shape, width, depth, and remnant values of bends for the new flange.&#xA;Check to apply overrides. Uncheck to restore the values defined in the Sheet Metal Rule." translation="用于替代新凸缘的折弯的释压形状、宽度、深度和余量值。&#xA;选中该选项可应用替代。取消选中该选项可恢复钣金规则中定义的值。"/>
	<label commandName="OverrideOptionGroupBendOverride" devLabel="Bend Override" translation="折弯替代"/>
	<label commandName="OverrideOptionGroupBendOverrideDesc" devLabel="Lets you override the bend radius value for the new flange.&#xA;Check to apply overrides. Uncheck to restore the value defined in the Sheet Metal Rule." translation="用于替代新凸缘的折弯半径值。&#xA;选中该选项可应用替代。取消选中该选项可恢复钣金规则中定义的值。"/>
	<label commandName="OverrideRulesOptionInput" devLabel="Override Rules" translation="替代规则"/>
	<label commandName="OverrideRulesOptionInputDesc" devLabel="Changes specific setting values for the new flange.&#xA;Select to apply custom values or deselect to use the Sheet Metal Rule defaults." translation="更改新凸缘的特定设置值。&#xA;选择以应用自定义值，或取消选择以使用钣金规则默认值。"/>
	<label commandName="OverrideThreeBendCornerGroup" devLabel="3-Bend Corner Override" translation="3 折弯拐角替代"/>
	<label commandName="OverrideThreeBendCornerGroupDesc" devLabel="Lets you override the relief shape, size, and placement at corners where 3 bends intersect.&#xA;Check to apply overrides. Uncheck to restore the values defined in the Sheet Metal Rule." translation="用于替代 3 个折弯相交的拐角处的释压形状、大小和放置。&#xA;选中该选项可应用替代。取消选中该选项可恢复钣金规则中定义的值。"/>
	<label commandName="OverrideTwoBendCornerGroup" devLabel="2-Bend Corner Override" translation="2 折弯拐角替代"/>
	<label commandName="OverrideTwoBendCornerGroupDesc" devLabel="Lets you override the relief shape, size, and placement at corners where 2 bends intersect.&#xA;Check to apply overrides. Uncheck to restore the values defined in the Sheet Metal Rule." translation="用于替代 2 个折弯相交的拐角处的释压形状、大小和放置。&#xA;选中该选项可应用替代。取消选中该选项可恢复钣金规则中定义的值。"/>
	<label commandName="PartExtComponentTypeDTT" devLabel="Creates a new Sheet Metal in a new Part Design and inserts it as an external component into %1%" translation="在新零件设计中创建新钣金并将其作为外部零部件插入到 %1% 中"/>
	<label commandName="PartSMRuleDTT" devLabel="Select a rule to determine the sheet metal component’s material thickness, bend radius, and corner relief type." translation="选择规则以确定钣金零部件的材料厚度、折弯半径和拐角释压类型。"/>
	<label commandName="PartSMSubTypeDTT" devLabel="Creates a component that is subject to sheet metal rules and can be used to create flat patterns." translation="创建受钣金规则约束且可用于创建展开模式的零部件。"/>
	<label commandName="PressBrakeDesc" devLabel="Creates sheet metal flanges that will be formed using a press brake with a punch and die as the manufacturing method." translation="创建将使用带凸凹模的压弯机作为制造方法而形成的钣金凸缘。"/>
	<label commandName="PressBrakeInfo" devLabel="Brake Form" translation="弯曲成型"/>
	<label commandName="RemoveBaseFlangeSelection" devLabel="Remove" translation="移除"/>
	<label commandName="RemoveBaseFlangeSelectionButton" devLabel="Remove selection set." translation="移除选择集。"/>
	<label commandName="RemoveContourFlangeJoinSelection" devLabel="Remove" translation="移除"/>
	<label commandName="RemoveContourFlangeJoinSelectionButton" devLabel="Remove selection set." translation="移除选择集。"/>
	<label commandName="RemoveContourFlangeSelection" devLabel="Remove" translation="移除"/>
	<label commandName="RemoveContourFlangeSelectionButton" devLabel="Remove selection set." translation="移除选择集。"/>
	<label commandName="RemoveEdgeFlangeSelection" devLabel="Remove" translation="移除"/>
	<label commandName="RemoveEdgeFlangeSelectionButton" devLabel="Remove selection set." translation="移除选择集。"/>
	<label commandName="RemoveHemFlangeSelection" devLabel="Remove" translation="移除"/>
	<label commandName="RemoveHemFlangeSelectionButton" devLabel="Remove selection set." translation="移除选择集。"/>
	<label commandName="Retry" devLabel="Retry" translation="重试"/>
	<label commandName="RipDistance" devLabel="Gap Width" translation="间隙宽度"/>
	<label commandName="RipFirstPoint" devLabel="Offset 1" translation="偏移 1"/>
	<label commandName="RipGapWidthDesc" devLabel="Specify the Gap Width value." translation="指定“间隙宽度”值。"/>
	<label commandName="RipInputSels" devLabel="Face/Edge/Vertex" translation="面/边/顶点"/>
	<label commandName="RipInputSelsDesc" devLabel="Select a face, edge or vertex to create a rip." translation="选择面、边或顶点以创建接缝。"/>
	<label commandName="RipSecondPoint" devLabel="Offset 2" translation="偏移 2"/>
	<label commandName="RolledHemAngle" devLabel="Angle" translation="角度"/>
	<label commandName="RolledHemAngleDesc" devLabel="Specifies how far the edge folds to form the rounded cavity." translation="指定边缘折弯形成圆形凹槽的幅度。"/>
	<label commandName="RolledHemDesc" devLabel="Creates a rounded fold that provides a smooth edge for gripping or fastening." translation="创建圆形折弯，提供便于握持或紧固的光滑边缘。"/>
	<label commandName="RolledHemRadius" devLabel="Radius" translation="半径"/>
	<label commandName="RolledHemRadiusDesc" devLabel="Specifies the curvature of the fold." translation="指定折弯的曲率。"/>
	<label commandName="RolledHemType" devLabel="Rolled" translation="卷边"/>
	<label commandName="RopeHemDesc" devLabel="Creates a rounded fold with an extended flange edge and a small gap between the edge and the connecting flange, similar to an open hem." translation="创建带延伸凸缘边缘的圆形折弯，边缘与相连凸缘之间保留微小间隙，类似开放式折边。"/>
	<label commandName="RopeHemGap" devLabel="Gap" translation="间隙"/>
	<label commandName="RopeHemGapDesc" devLabel="Specify the space between layers of sheet metal after folding." translation="指定折弯后钣金各层之间的间距。"/>
	<label commandName="RopeHemLength" devLabel="Length" translation="长度"/>
	<label commandName="RopeHemLengthDesc" devLabel="Specifies the distance to extrude the hem from the selected edge." translation="指定从所选边缘拉伸折边的距离。"/>
	<label commandName="RopeHemRadius" devLabel="Radius" translation="半径"/>
	<label commandName="RopeHemRadiusDesc" devLabel="Specifies the curvature of the fold." translation="指定折弯的曲率。"/>
	<label commandName="RopeHemType" devLabel="Rope" translation="绳状折边"/>
	<label commandName="RuleLCLZ" devLabel="Rule" translation="规则"/>
	<label commandName="RuleNoteForThicknessChanged" devLabel="ThicknessChange" translation="ThicknessChange"/>
	<label commandName="RulesWidget" devLabel="Rules Widget" translation="规则控件"/>
	<label commandName="SMBendAllowBendReliefTooltip" devLabel="Turn off to skip creating any bend reliefs." translation="关闭以跳过创建任何折弯释压。"/>
	<label commandName="SMBendAllowCornerReliefTooltip" devLabel="Turn off to skip creating any corner reliefs." translation="关闭以跳过创建任何拐角释压。"/>
	<label commandName="SMBendAngleCI" devLabel="SMBendAngleCI%1%" translation="SMBendAngleCI%1%"/>
	<label commandName="SMBendFeatAngleInput" devLabel="Bend Angle" translation="折弯角度"/>
	<label commandName="SMBendFeatCurveSelTooltip" devLabel="Select a sketch line over a sheet metal face." translation="选择钣金面上的草图线。"/>
	<label commandName="SMBendFeatFaceSelection" devLabel="Stationary Side" translation="固定侧"/>
	<label commandName="SMBendFeatLineSelectionCI" devLabel="Bend Line" translation="折弯线"/>
	<label commandName="SMBendFeatureFaceSelection" devLabel="Click on the stationary side of a face on a sheet metal body." translation="单击钣金实体上某个面的固定侧"/>
	<label commandName="SMBendFlipUpDownTooltip" devLabel="Flips the direction of the bend up / down." translation="翻转向上/向下折弯的方向"/>
	<label commandName="SMBendLinePositionTooltip" devLabel="Creates the bend at the start, end or center of the bend line." translation="在折弯线的起点、终点或中点处创建折弯。"/>
	<label commandName="SMBendTable" devLabel="SMBendTable" translation="SMBendTable"/>
	<label commandName="SMBendTableAdd" devLabel="Add" translation="添加"/>
	<label commandName="SMBendTableRemvoe" devLabel="Remove" translation="移除"/>
	<label commandName="SMBendTableRowLabel" devLabel="Row Label" translation="行标签"/>
	<label commandName="SMComponentType" devLabel="Sheet Metal" translation="钣金"/>
	<label commandName="SMComponentTypeDTT" devLabel="Creates a sheet metal component in the assembly" translation="在部件中创建钣金零部件"/>
	<label commandName="SMFlangeDirectionType" devLabel="Orientation" translation="方向"/>
	<label commandName="SelectFromLibrary" devLabel="Select from library..." translation="从库中选择..."/>
	<label commandName="SheetMetal Environment" devLabel="Sheet Metal" translation="钣金"/>
	<label commandName="SheetMetalBaseFlangePreviewSuppressedTooltip" devLabel="Select or deselect closed sketch profiles" translation="选择或取消选择闭合草图轮廓"/>
	<label commandName="SheetMetalBaseFlangePreviewTooltipMac" devLabel="Select more closed sketch profiles, adjust settings, or hold Command to modify selection" translation="选择更多闭合草图轮廓、调整设置或按住 Command 键以修改选择"/>
	<label commandName="SheetMetalBaseFlangePreviewTooltipWindows" devLabel="Select more closed sketch profiles, adjust settings, or hold Ctrl to modify selection" translation="选择更多闭合草图轮廓、调整设置或按住 Ctrl 键以修改选择"/>
	<label commandName="SheetMetalBendMissingStationaryEntity" devLabel="Missing stationary face." translation="缺少固定面。"/>
	<label commandName="SheetMetalCompName" devLabel="Component" translation="零部件"/>
	<label commandName="SheetMetalContourFlangeJoinTooltip" devLabel="If the sketch starts on an edge, select additional edges" translation="如果草图起始于一条边，请选择更多的边"/>
	<label commandName="SheetMetalContourFlangePreviewSuppressedTooltip" devLabel="Select or deselect open sketch profiles" translation="选择或取消选择开放的草图轮廓"/>
	<label commandName="SheetMetalCurrentDefaultHubRuleSelectorLabel" devLabel="Default rule" translation="默认规则"/>
	<label commandName="SheetMetalCurrentDefaultHubRuleSelectorToolTip" devLabel="Sets the rule applied to new sheet metal bodies by default." translation="设置默认情况下应用于新钣金实体的规则。"/>
	<label commandName="SheetMetalCurrentHubDefaultRuleKFactorLabel" devLabel="K-Factor" translation="K 因子"/>
	<label commandName="SheetMetalCurrentHubDefaultRuleKFactorToolTip" devLabel="Shows the K-Factor value set in the default rule." translation="显示在默认规则中设置的 K 系数值。"/>
	<label commandName="SheetMetalCurrentHubDefaultRuleThicknessLabel" devLabel="Thickness" translation="厚度"/>
	<label commandName="SheetMetalCurrentHubDefaultRuleThicknessToolTip" devLabel="Shows the material thickness of the default rule." translation="显示默认规则的材料厚度。"/>
	<label commandName="SheetMetalCurrentHubDefaultRuleUnitsLabel" devLabel="Units" translation="单位"/>
	<label commandName="SheetMetalCurrentHubDefaultRuleUnitsToolTip" devLabel="Shows the units used by the default rule." translation="显示默认规则使用的单位。"/>
	<label commandName="SheetMetalDefaultHubRuleOptionGroupName" devLabel="Default sheet metal rule" translation="默认钣金规则"/>
	<label commandName="SheetMetalEdgeFlangePreviewSuppressedTooltip" devLabel="Select or deselect sheet metal edges" translation="选择或取消选择钣金边"/>
	<label commandName="SheetMetalEdgeFlangeTooltip" devLabel="Select more sheet metal edges or specify height to extrude" translation="选择更多钣金边或指定要拉伸的高度"/>
	<label commandName="SheetMetalFlangeContourFlangeTooltip" devLabel="Select more open sketch profiles or specify height to extrude" translation="选择更多开放的草图轮廓或指定要拉伸的高度"/>
	<label commandName="SheetMetalFlangeDefaultTooltip" devLabel="Select sheet metal edges or sketch geometry to use for flange profiles" translation="选择要用于凸缘轮廓的钣金边或草图几何图元"/>
	<label commandName="SheetMetalFlangePreviewTooltipMac" devLabel="Adjust settings or hold Command to modify selection" translation="调整设置或按住 Command 键以修改选择"/>
	<label commandName="SheetMetalFlangePreviewTooltipWindows" devLabel="Adjust settings or hold Ctrl to modify selection" translation="调整设置或按住 Ctrl 键以修改选择"/>
	<label commandName="SheetMetalHemFlangeDefaultTooltip" devLabel="Select an edge to hem" translation="选择要折边的边"/>
	<label commandName="SheetMetalLoftedFlangeDefaultTooltip" devLabel="Select two sketch profiles to create flange." translation="选择两个草图轮廓以创建凸缘。"/>
	<label commandName="SheetMetalLoftedFlangePreviewSuppressedTooltip" devLabel="Select or deselect sketch profiles" translation="选择或取消选择草图轮廓"/>
	<label commandName="SheetMetalLoftedFlangeTooltip" devLabel="Select second sketch profile to loft" translation="选择要放样的第二个草图轮廓"/>
	<label commandName="SheetMetalRipAlongEdgePreviewCursorPromptMac" devLabel="Adjust the Gap Width value or hold Command to modify selection" translation="调整“间隙宽度”值或按住 Command 键以修改选择"/>
	<label commandName="SheetMetalRipAlongEdgePreviewCursorPromptWindows" devLabel="Adjust the Gap Width value or hold Ctrl to modify selection" translation="调整“间隙宽度”值或按住 Ctrl 键以修改选择"/>
	<label commandName="SheetMetalRipBetweenPointsOneSelectionCursorPrompt" devLabel="Select the end point on an opposing external edge of the same face" translation="选择同一个面的相对外边缘上的终点"/>
	<label commandName="SheetMetalRipBetweenPointsPreviewCursorPromptMac" devLabel="Adjust the Gap Width value, point locations, or hold Command to modify selection" translation="调整“间隙宽度”值、点位置或按住 Command 键以修改选择"/>
	<label commandName="SheetMetalRipBetweenPointsPreviewCursorPromptWindows" devLabel="Adjust the Gap Width value, point locations, or hold Ctrl to modify selection" translation="调整“间隙宽度”值、点位置或按住 Ctrl 键以修改选择"/>
	<label commandName="SheetMetalRipDefaultCursorPrompt" devLabel="Select a face, an internal edge, or a start point on an external edge" translation="选择面、内边缘或选择外边缘上的起点"/>
	<label commandName="SheetMetalRipDefaultTooltip" devLabel="Select a face, an internal edge, or a start point on an external edge" translation="选择面、内边缘或选择外边缘上的起点"/>
	<label commandName="SheetMetalRipEdit" devLabel="Edit Feature" translation="编辑特征"/>
	<label commandName="SheetMetalRipFacePreviewCursorPromptMac" devLabel="Hold Command to modify selection" translation="按住 Command 键以修改选择"/>
	<label commandName="SheetMetalRipFacePreviewCursorPromptWindows" devLabel="Hold Ctrl to modify selection" translation="按住 Ctrl 键以修改选择"/>
	<label commandName="SheetMetalRule" devLabel="Sheet Metal Rule" translation="钣金规则"/>
	<label commandName="SheetMetalRuleDropDownLabel" devLabel="Rule" translation="规则"/>
	<label commandName="SheetMetalRuleDropDownToolTip" devLabel="Selects a sheet metal rule for the active component." translation="选择激活零部件的钣金规则。"/>
	<label commandName="SheetMetalRuleKFactorLabel" devLabel="K-Factor" translation="K 因子"/>
	<label commandName="SheetMetalRuleKFactorToolTip" devLabel="Shows the K-Factor value used by the selected rule." translation="显示选定规则使用的 K 系数值。"/>
	<label commandName="SheetMetalRuleThicknessLabel" devLabel="Thickness" translation="厚度"/>
	<label commandName="SheetMetalRuleThicknessToolTip" devLabel="Shows the material thickness used by the selected rule." translation="显示选定规则使用的材料厚度。"/>
	<label commandName="SheetMetalRuleUnitsLabel" devLabel="Units" translation="单位"/>
	<label commandName="SheetMetalRuleUnitsToolTip" devLabel="Shows the units used by the selected rule." translation="显示选定规则使用的单位。"/>
	<label commandName="SheetMetalRulesLibraryGreaterThanZero" devLabel="Must be greater than 0" translation="必须大于 0"/>
	<label commandName="SheetMetalRulesLibraryOfflineMessage" devLabel="You're currently offline and can't connect to the library. The default rule will be used when you create a new sheet metal component.&#xA;&#xA;Once you're back online, the rules library will be available." translation="您当前处于脱机状态，无法连接到库。当您创建新的钣金零部件时，将使用默认规则。&#xA;&#xA;当您恢复联机状态后，规则库将可用。"/>
	<label commandName="SheetMetalRulesLibraryOfflineTitle" devLabel="Sheet metal rules library isn't available" translation="钣金规则库不可用"/>
	<label commandName="SheetMetalRulesName" devLabel="Sheet Metal Rules" translation="钣金规则"/>
	<label commandName="SheetMetalRulesToolTip" devLabel="Sheet Metal Rules" translation="钣金规则"/>
	<label commandName="SheetMetalSettingsCmdInput" devLabel="SheetMetalSettingsCmdInput" translation="SheetMetalSettingsCmdInput"/>
	<label commandName="SheetmetalSheetMetalBendEdit" devLabel="Edit Feature" translation="编辑特征"/>
	<label commandName="SheetmetalUnfoldEdit" devLabel="Edit Feature" translation="编辑特征"/>
	<label commandName="SketchCurveLabel" devLabel="Sketch Curve Label" translation="草图曲线标签"/>
	<label commandName="SketchNumberString" devLabel="SketchNumberString" translation="SketchNumberString"/>
	<label commandName="SketchProfileLabel" devLabel="Sketch Profile Label" translation="草图轮廓标签"/>
	<label commandName="SketchSelRow" devLabel="Profile %1%" translation="轮廓 %1%"/>
	<label commandName="SplineToPolyline" devLabel="Splines to Polylines" translation="样条曲线到多段线"/>
	<label commandName="SplineToPolylineTolerance" devLabel="Tolerance" translation="公差"/>
	<label commandName="StandardFlangeInfo" devLabel="Flange (Base/Edge/Contour)" translation="凸缘(基础/边/轮廓)"/>
	<label commandName="StandardFlangeTypeDesc" devLabel="Creates a flat or bent sheet metal flange." translation="创建平的或弯曲的钣金凸缘。"/>
	<label commandName="StationaryFaceSelection" devLabel="Stationary Side" translation="固定侧"/>
	<label commandName="StationarySideSelCmdInput" devLabel="StationarySideType" translation="固定侧类型"/>
	<label commandName="SwitchSheetMetalDataCommand" devLabel="Switch Sheet Metal Rule" translation="切换钣金规则"/>
	<label commandName="SymmetricEdgeRowGroupName" devLabel="Edge %1% (Symmetric)" translation="边 %1% (对称)"/>
	<label commandName="SymmetricExtent" devLabel="Symmetric" translation="对称"/>
	<label commandName="SymmetricExtentDesc" devLabel="Creates identical extrusions on each side of the profile plane." translation="在轮廓平面的每侧创建相同拉伸。"/>
	<label commandName="SymmetricFlangeOption" devLabel="Symmetric" translation="对称"/>
	<label commandName="SymmetricFlangeOptionDesc" devLabel="Creates a flange of a specified distance centered on the mid-point of the selected edge." translation="以所选边缘中点为中心，创建指定距离的凸缘。"/>
	<label commandName="SymmetryWidth" devLabel="Distance" translation="距离"/>
	<label commandName="SymmetryWidthDesc" devLabel="Specifies the overall distance of the flange, centered on the mid-point of the selected edge." translation="指定以所选边缘中点为中心的凸缘总长度。"/>
	<label commandName="TangentToBend" devLabel="Tangent To Bend" translation="相切于折弯"/>
	<label commandName="TangentToBendDesc" devLabel="Sets the height reference tangent to the bend between the base flange and new flange, parallel to the new flange." translation="将高度参考设置为基体凸缘和新凸缘之间与新凸缘平行的折弯公切面处。"/>
	<label commandName="TeardropHemDesc" devLabel="Creates a rounded fold with an extended flange edge, bent beyond 180 degrees to form a teardrop-like shape." translation="创建带延伸凸缘边缘的圆形折弯，折弯角度超过 180 度，形成水滴状轮廓。"/>
	<label commandName="TeardropHemGap" devLabel="Gap" translation="间隙"/>
	<label commandName="TeardropHemGapDesc" devLabel="Specify the space between layers of sheet metal after folding." translation="指定折弯后钣金各层之间的间距。"/>
	<label commandName="TeardropHemLength" devLabel="Length" translation="长度"/>
	<label commandName="TeardropHemLengthDesc" devLabel="Specifies the distance to extrude the hem from the selected edge." translation="指定从所选边缘拉伸折边的距离。"/>
	<label commandName="TeardropHemRadius" devLabel="Radius" translation="半径"/>
	<label commandName="TeardropHemRadiusDesc" devLabel="Specifies the curvature of the fold." translation="指定折弯的曲率。"/>
	<label commandName="TeardropHemType" devLabel="Teardrop" translation="泪滴形折边"/>
	<label commandName="ThicknessCmdInput" devLabel="ThicknessType" translation="ThicknessType"/>
	<label commandName="ThicknessId" devLabel="Thickness: " translation="厚度: "/>
	<label commandName="ThreeBendReliefRadius" devLabel="Relief Radius" translation="释压半径"/>
	<label commandName="ThreeBendReliefRadiusDesc" devLabel="Specify the relief radius value to override the sheet metal rule." translation="指定释压半径值以替代钣金规则。"/>
	<label commandName="ToObject" devLabel="To Object" translation="目标对象"/>
	<label commandName="ToObjectOffsetInput" devLabel="Offset" translation="偏移"/>
	<label commandName="ToObjectOffsetInputDesc" devLabel="Offsets extrusion from selected object." translation="从所选对象偏移拉伸。"/>
	<label commandName="ToObjectSelectInfo" devLabel="Object" translation="对象"/>
	<label commandName="ToObjectSelectInfoDesc" devLabel="Select a face, plane, or point to extend the flange to." translation="选择一个面、平面或点，将凸缘延伸至该位置。"/>
	<label commandName="ToObjectTooltip" devLabel="Extrudes to a body, face, or plane that you select." translation="拉伸到您选择的实体、面或平面。"/>
	<label commandName="TwoBendCornerReliefSize" devLabel="Relief Size" translation="释压大小"/>
	<label commandName="TwoBendReliefSize" devLabel="Relief Size" translation="释压大小"/>
	<label commandName="TwoBendReliefSizeDesc" devLabel="Specifies the size of the bend-relief cutout measured in the flat pattern." translation="指定在展开模式下测量的折弯释压切口的尺寸。"/>
	<label commandName="TwoOffsetEdgeRowGroupName" devLabel="Edge %1% (Two Offsets)" translation="边 %1% (两个偏移)"/>
	<label commandName="TwoOffsetFlangeOption" devLabel="Two Offsets" translation="双偏移"/>
	<label commandName="TwoOffsetFlangeOptionDesc" devLabel="Creates a flange positioned between two selected reference faces, with adjustable offsets from each face." translation="创建位于两个所选参考面之间的凸缘，可调整与每个面的偏移量。"/>
	<label commandName="TwoOffsetRef1Label" devLabel="Reference 1" translation="参考 1"/>
	<label commandName="TwoOffsetRef2Label" devLabel="Reference 2" translation="参考 2"/>
	<label commandName="TwoOffsetRefOrder" devLabel="TwoOffsetRefOrder" translation="TwoOffsetRefOrder"/>
	<label commandName="TwoSideEdgeRowGroupName" devLabel="Edge %1% (Two Sides)" translation="边 %1% (两侧)"/>
	<label commandName="TwoSideExtent" devLabel="Two Sides" translation="两侧"/>
	<label commandName="TwoSideExtentDesc" devLabel="Creates a unique extrusion on each side of the profile plane." translation="在轮廓平面的每侧创建唯一拉伸。"/>
	<label commandName="TwoSideFlangeOption" devLabel="Two Sides" translation="两侧"/>
	<label commandName="TwoSideFlangeOptionDesc" devLabel="Creates a flange centered on the mid-point of the selected edge with two adjustable width extents on both sides." translation="创建以选定边的中点为中心且两侧的两个宽度范围可调整的凸缘。"/>
	<label commandName="UISheetMetalRulesOptionGroupName" devLabel="Sheet Metal Rules" translation="钣金规则"/>
	<label commandName="UISheetMetalRulesOptionGroupTooltip" devLabel="Preferences controlling sheet metal rules" translation="控制钣金规则的首选项"/>
	<label commandName="UnfoldAllBendsInput" devLabel="Unfold all bends" translation="展开所有折弯"/>
	<label commandName="UnfoldBendFacesInput" devLabel="Bends" translation="折弯"/>
	<label commandName="UnfoldEnvironment" devLabel="Unfold Environment" translation="展开环境"/>
	<label commandName="UnfoldInsideOtherGroup" devLabel="Unfold is not supported inside other custom group. Please come out of the group by roll back or roll forward on timeline, and try unfold." translation="在其他自定义组内不支持展开。请在时间轴中向后或向前滚动以退出组，然后尝试展开。"/>
	<label commandName="UnfoldInsideUnfold" devLabel="You are already in Unfold mode. Would you like to edit the unfold feature to add bends?" translation="您已处于展开模式下。是否要编辑展开特征以添加折弯？"/>
	<label commandName="UnfoldMissingStationaryEntity" devLabel="Missing stationary face." translation="缺少固定面。"/>
	<label commandName="UnfoldStationaryFace" devLabel="Stationary Entity" translation="固定实体"/>
	<label commandName="UnitType" devLabel="Units" translation="单位"/>
	<label commandName="UpdateAllFlatPatternsCommand" devLabel="Update All Flat Patterns" translation="更新所有展开模式"/>
	<label commandName="UpdateDocumentSheetMetalRule" devLabel="Sheet Metal Rule edit" translation="钣金规则编辑"/>
	<label commandName="UpdateFlatPatternCommand" devLabel="Update Flat Pattern" translation="更新展开模式"/>
	<label commandName="UpdateFlatPatternFromMainDesignCommand" devLabel="Update Flat Pattern" translation="更新展开模式"/>
	<label commandName="VisibleFPGeom" devLabel="Visible Geometry" translation="可见几何图元"/>
	<label commandName="YardImperial" devLabel="Yard" translation="码"/>
	<label commandName="allowBendReliefOptInput" devLabel="Bend Relief" translation="折弯释压"/>
	<label commandName="allowCornerReliefOptInput" devLabel="Corner Relief" translation="拐角释压"/>
	<label commandName="bendLinePosition" devLabel="bendLinePosition%1%" translation="bendLinePosition%1%"/>
	<label commandName="bendReliefDepth" devLabel="Relief Depth" translation="释压深度"/>
	<label commandName="bendReliefDepthDesc" devLabel="Specify the relief depth value to override the sheet metal rule." translation="指定释压深度值以替代钣金规则。"/>
	<label commandName="bendReliefWidth" devLabel="Relief Width" translation="释压宽度"/>
	<label commandName="bendReliefWidthDesc" devLabel="Specify the relief width value to override the sheet metal rule." translation="指定释压宽度值以替代钣金规则。"/>
	<label commandName="cornerMiterGapDefaultTooltip" devLabel=" (As Rule)&#xA;Defines the distance between the selected edges of the flanges at the corner." translation=" (作为规则)&#xA;定义拐角处凸缘的选定边之间的距离。"/>
	<label commandName="cornerMiterGapOverrideTooltip" devLabel=" (Override)&#xA;Defines the distance between the selected edges of the flanges at the corner." translation=" (替代)&#xA;定义拐角处凸缘的选定边之间的距离。"/>
	<label commandName="infoAllowBendReliefOption" devLabel="infoAllowBendReliefOption%1%" translation="infoAllowBendReliefOption%1%"/>
	<label commandName="infoBendLineAtCenter" devLabel="Center" translation="中心"/>
	<label commandName="infoBendLineAtEnd" devLabel="End" translation="结束"/>
	<label commandName="infoBendLineAtStart" devLabel="Start" translation="开始"/>
	<label commandName="infoBendLinePosition" devLabel="Bend Line Position" translation="折弯线位置"/>
	<label commandName="infoBendPositionOption" devLabel="Bend Position" translation="折弯位置"/>
	<label commandName="infoBendReliefShapePositionOption" devLabel="Relief Shape" translation="释压形状"/>
	<label commandName="infoConvToSMFeatBodyThickness" devLabel="Thickness (Detected)" translation="厚度(已检测)"/>
	<label commandName="infoConvToSMFeatFaceSelection" devLabel="Source" translation="来源"/>
	<label commandName="infoFlangeEdgeLabelRow" devLabel="infoFlangeEdgeLabel%1%" translation="infoFlangeEdgeLabel%1%"/>
	<label commandName="infoFlangeExtentsOptionsRow" devLabel="infoFlangeExtentsOptions%1%" translation="infoFlangeExtentsOptions%1%"/>
	<label commandName="infoHeightDatumOption" devLabel="Height Datum" translation="高度基准"/>
	<label commandName="infoShapeArcWeld" devLabel="Arc Weld" translation="电弧焊"/>
	<label commandName="infoShapeArcWeldDesc" devLabel="Creates a blunt notch bend relief with spline edges limited by the bending area." translation="创建带有受折弯区域限制的样条曲线边缘的钝口缺口折弯释压形状。"/>
	<label commandName="infoShapeFullRound" devLabel="Full Round" translation="全圆角"/>
	<label commandName="infoShapeFullRoundDesc" devLabel="Creates a bend relief shape by extending the flange edges until they intersect, then adding a full round fillet at the intersection, tangent to the flange edges starting at the bend zone." translation="创建折弯释压形状的方法是延长凸缘边直至其相交，然后在相交处添加全圆角，从折弯区域开始与凸缘边相切。"/>
	<label commandName="infoShapeIntersection" devLabel="Intersection" translation="交点"/>
	<label commandName="infoShapeIntersectionDesc" devLabel="Creates a bend relief shape by extending the flange edges until they intersect." translation="创建折弯释压形状的方法是延长凸缘边直至其相交。"/>
	<label commandName="infoShapeLaserWeld" devLabel="Laser Weld" translation="激光焊缝"/>
	<label commandName="infoShapeLaserWeldDesc" devLabel="Creates a circular notch bend relief with spline edges limited by the bending area." translation="创建带有受折弯区域限制的样条曲线边缘的圆形缺口折弯释压形状。"/>
	<label commandName="infoShapeLinearWeld" devLabel="Linear Weld" translation="线状焊缝"/>
	<label commandName="infoShapeLinearWeldDesc" devLabel="Creates a V-notch bend relief limited by the bending area." translation="创建由折弯区域限制的 V 型切口折弯释压。"/>
	<label commandName="infoShapeNoReplacement" devLabel="No Replacement" translation="无替换"/>
	<label commandName="infoShapeNoReplacementDesc" devLabel="Creates no special bend relief shape at the corner where 3 bends meet." translation="在 3 个折弯相交的拐角处不创建特殊的折弯释压形状。"/>
	<label commandName="infoShapeRound" devLabel="Round" translation="圆形"/>
	<label commandName="infoShapeRoundDesc" devLabel="Creates a bend relief with a rounded notch and a width, depth, and remnant that you specify." translation="按照您指定的宽度、深度和余量来创建带有圆形槽口的折弯释压。"/>
	<label commandName="infoShapeRoundWithRadius" devLabel="Round with Radius" translation="使用半径画圆"/>
	<label commandName="infoShapeRoundWithRadiusDesc" devLabel="Creates a bend relief shape by extending the flange edges until they intersect, then adding a fillet of a size that you specify to round the intersection." translation="创建折弯释压形状的方法是延长凸缘边直至其相交，然后添加您指定大小的圆角以使交点变圆。"/>
	<label commandName="infoShapeSquare" devLabel="Square" translation="方形"/>
	<label commandName="infoShapeSquareDesc" devLabel="Creates a square bend relief of a specified size." translation="创建指定尺寸的方形折弯释压形状。"/>
	<label commandName="infoShapeStraight" devLabel="Straight" translation="直线"/>
	<label commandName="infoShapeStraightDesc" devLabel="Creates a bend relief with a squared notch and a width, depth, and remnant that you specify." translation="按照您指定的宽度、深度和余量来创建带有方形槽口的折弯释压。"/>
	<label commandName="infoShapeTear" devLabel="Tear" translation="水滴形"/>
	<label commandName="infoShapeTearDesc" devLabel="Creates no bend relief, so the material is torn and leaves a remnant that you specify." translation="不创建折弯释压，因此材料会被撕裂并留下您指定的余量。"/>
	<label commandName="infoShapeTrimToBend" devLabel="Trim to Bend" translation="修剪到折弯"/>
	<label commandName="infoShapeTrimToBendDesc" devLabel="Creates a square bend relief limited by the bending area." translation="创建受折弯区域限制的方形折弯释压形状。"/>
	<label commandName="infoSketchCurveUniqueLabelRow" devLabel="infoSketchCurveUniqueLabelRow%1%" translation="infoSketchCurveUniqueLabelRow%1%"/>
	<label commandName="infoSketchProfileLabelRow" devLabel="infoSketchProfileLabelRow%1%" translation="infoSketchProfileLabelRow%1%"/>
	<label commandName="infoTableRowLabel" devLabel="infoTableRowLabel%1%" translation="infoTableRowLabel%1%"/>
	<label commandName="infoThreeBendReliefShapePositionOption" devLabel="Relief Shape" translation="释压形状"/>
	<label commandName="infoTwoBendCornerReliefPlacement" devLabel="Relief Placement" translation="释压位置"/>
	<label commandName="infoTwoBendCornerReliefPlacementIntersection" devLabel="Intersection" translation="交点"/>
	<label commandName="infoTwoBendCornerReliefShapeOption" devLabel="Relief Shape" translation="释压形状"/>
	<label commandName="infoTwoBendCornerReliefShapeRound" devLabel="Round" translation="圆形"/>
	<label commandName="infoTwoBendCornerReliefShapeSquare" devLabel="Square" translation="方形"/>
	<label commandName="infoTwoBendCornerReliefShapeTear" devLabel="Tear" translation="水滴形"/>
	<label commandName="infoTwoBendPlacementIntersection" devLabel="Intersection" translation="交点"/>
	<label commandName="infoTwoBendPlacementIntersectionDesc" devLabel="Centers the relief shape on the intersection where 2 flanges meet the base flange." translation="使释压形状以 2 个凸缘与基础凸缘相交处的交点为中心。"/>
	<label commandName="infoTwoBendPlacementTangent" devLabel="Tangent" translation="相切"/>
	<label commandName="infoTwoBendPlacementTangentDesc" devLabel="Places a rounded relief shape so that it is tangent to the edges of 2 flanges where they meet the base flange." translation="放置圆形释压形状，使其在 2 个凸缘与基础凸缘相交的位置与 2 个凸缘的边相切。"/>
	<label commandName="infoTwoBendPlacementVertex" devLabel="Vertex" translation="顶点"/>
	<label commandName="infoTwoBendPlacementVertexDesc" devLabel="Centers the relief shape on the vertex where 2 flanges meet the base flange." translation="将释压形状居中于两个凸缘与基体凸缘相交的顶点处。"/>
	<label commandName="infoTwoBendReliefPlacement" devLabel="Relief Placement" translation="释压位置"/>
	<label commandName="infoTwoBendReliefShapeOption" devLabel="Relief Shape" translation="释压形状"/>
	<label commandName="infoTwoBendShapeRound" devLabel="Round" translation="圆形"/>
	<label commandName="infoTwoBendShapeRoundDesc" devLabel="Creates a circular bend relief of a specified size." translation="创建指定尺寸的圆形折弯释压形状。"/>
	<label commandName="infoTwoBendShapeTear" devLabel="Tear" translation="水滴形"/>
	<label commandName="infoTwoBendShapeTearDesc" devLabel="Creates no bend relief, so the material is torn at the corner." translation="不创建折弯释压形状，因此材料会在拐角处撕裂。"/>
	<label commandName="lclzArc" devLabel="Arc" translation="圆弧"/>
	<label commandName="lclzAutomatePanelSketch" devLabel="AUTOMATE" translation="自动"/>
	<label commandName="lclzCONSTRAINTS" devLabel="CONSTRAINTS" translation="约束"/>
	<label commandName="lclzCREATE" devLabel="CREATE" translation="创建"/>
	<label commandName="lclzChangeSheetMetalData1" devLabel="Displays sheetmetal rule data." translation="显示钣金规则数据。"/>
	<label commandName="lclzCircle" devLabel="Circle" translation="圆"/>
	<label commandName="lclzConstruction" devLabel="Construct" translation="构造"/>
	<label commandName="lclzConvToSMTipsAndTricksDesc" devLabel="Use this to add Sheet Metal features to a solid body." translation="使用此项可将钣金特征添加到实体。"/>
	<label commandName="lclzConvToSMTipsAndTricksTips" devLabel="Select a face of a solid body for inferring thickness." translation="选择实体的面以用于推断厚度。"/>
	<label commandName="lclzConvToSMTipsAndTricksTitle" devLabel="Convert To Sheet Metal Information" translation="转换为钣金信息"/>
	<label commandName="lclzConvertToSheetMetalCmd1" devLabel="Converts a solid body of uniform thickness to a sheet metal body." translation="将统一厚度的实体转换为钣金实体。"/>
	<label commandName="lclzConvertToSheetMetalCmd2" devLabel="Select a face of a solid body for inferring thickness." translation="选择实体的面以用于推断厚度。"/>
	<label commandName="lclzCreate" devLabel="Create" translation="创建"/>
	<label commandName="lclzFlatPatternDXFExportCmd1" devLabel="Exports a sheet metal Flat Pattern to a DXF file." translation="将钣金展开模式导出为 DXF 文件。"/>
	<label commandName="lclzFlatPatternDXFExportCmd2" devLabel="Outer profiles, interior profiles, bend center lines, bend extend lines, and text are assigned to different layers in the DXF file." translation="外轮廓、内轮廓、折弯中心线、折弯延伸线和文本将被指定给 DXF 文件中的不同图层。"/>
	<label commandName="lclzFlatPatternDXFTipsAndTricksTips" devLabel="The Flat Pattern will be exported as a DXF file to use for laser cutting. Outer profiles, interior profiles, bend center lines, bend extent lines and text will each be assigned to a different layer in the DXF file." translation="展开模式将被导出为 DXF 文件以用于激光切割。外轮廓、内轮廓、折弯中心线、折弯范围线和文本将各自被指定给 DXF 文件中的各个图层。"/>
	<label commandName="lclzFlatPatternDXFTipsAndTricksTitle" devLabel="Export Flat Pattern As DXF Information" translation="将展开模式导出为 DXF 信息"/>
	<label commandName="lclzFlatPatternSolidTab" devLabel="FLAT PATTERN SOLID" translation="展开模式实体"/>
	<label commandName="lclzFlatPatternSurfaceTab" devLabel="FLAT PATTERN SURFACE" translation="展开模式曲面"/>
	<label commandName="lclzFusionSheetMetalCornerCommand1" devLabel="Corner Closure" translation="拐角闭合"/>
	<label commandName="lclzFusionSheetMetalCornerCommand2" devLabel="Adjusts the gap and relief shape of a corner that is formed by two flanges." translation="调整由两个凸缘形成的拐角的间隙和释压形状。"/>
	<label commandName="lclzFusionSheetMetalExitFlatPatternCmd1" devLabel="Return to the folded model." translation="返回到折叠模型。"/>
	<label commandName="lclzFusionSheetMetalFlatPatternCmd1" devLabel="Enters Flat Pattern mode and creates a flat pattern from a folded design." translation="进入展开模式并从折叠的设计创建展开模式。"/>
	<label commandName="lclzFusionSheetMetalFlatPatternCmd2" devLabel="Select the face to position on the XY plane. All flanges are unfolded from that face. Select Finish Flat Pattern to exit out of the mode." translation="选择要放置在 XY 平面上的面。所有凸缘都将从该面展开。选择“完成展开模式”可退出该模式。"/>
	<label commandName="lclzFusionSheetMetalRipCommand1" devLabel="Creates a Rip on a sheet metal flange along an edge, between two points, or removes a face." translation="在钣金凸缘上沿边或在两点之间创建接缝，或者移除面。"/>
	<label commandName="lclzFusionSheetMetalRipCommand2" devLabel="Select a face to remove, an edge to rip along, or two points to define the start and end of the rip. If selecting two points or an edge, specify the Gap Width value." translation="选择要移除的面、要沿其裂开的边或两个点以定义接缝的起点和终点。如果选择两个点或边，请指定“间隙宽度”值。"/>
	<label commandName="lclzFusionSheetmetalRefoldCommand1" devLabel="Returns the unfolded bends to their folded state and exits the unfold mode." translation="将展开折弯恢复到其折叠状态并退出展开模式。"/>
	<label commandName="lclzFusionSheetmetalUnfoldCommand1" devLabel="Unfolds the selected bends. Unfolding the bends lets you create features across flanges." translation="展开选定的折弯。通过展开折弯可以跨凸缘创建特征。"/>
	<label commandName="lclzFusionSheetmetalUnfoldCommand2" devLabel="Select the face that remains stationery then select the bends to unfold. Click the Refold command to exit the Unfold mode." translation="选择保持固定的面，然后选择要展开的折弯。单击“重新折叠”命令以退出展开模式。"/>
	<label commandName="lclzInsert" devLabel="Insert" translation="插入"/>
	<label commandName="lclzInspect" devLabel="Inspect" translation="检验"/>
	<label commandName="lclzMODIFY" devLabel="MODIFY" translation="修改"/>
	<label commandName="lclzModify" devLabel="Modify" translation="修改"/>
	<label commandName="lclzPattern" devLabel="Pattern" translation="阵列"/>
	<label commandName="lclzPolygon" devLabel="Polygon" translation="多边形"/>
	<label commandName="lclzProjectInclude" devLabel="Project / Include" translation="投影/包含"/>
	<label commandName="lclzRectangle" devLabel="Rectangle" translation="矩形"/>
	<label commandName="lclzSFlatPatternDXFTipsAndTricksDesc" devLabel="Enable Convert Splines to Polylines if your laser cutting machine does not support splines. The tolerance value specifies the maximum allowable deviation between the converted polylines and the original splines." translation="如果您的激光切割机不支持样条曲线，请启用“将样条曲线转换为多段线”。公差值指定了转换后的多段线与原始样条曲线之间的最大允许偏差。"/>
	<label commandName="lclzSelect" devLabel="Select" translation="选择"/>
	<label commandName="lclzSelectionPriorityCommands" devLabel="Selection Priority" translation="选择优先级"/>
	<label commandName="lclzSelectionTools" devLabel="Selection Tools" translation="选择工具"/>
	<label commandName="lclzSheetMetalBendCmd1" devLabel="Bends a sheet metal body along the selected line." translation="沿选定线折弯钣金实体。"/>
	<label commandName="lclzSheetMetalBendCmd2" devLabel="Draw a line over a sheet metal body and select both objects to create a bend." translation="在钣金实体上绘制一条线并选择两个对象以创建折弯。"/>
	<label commandName="lclzSheetMetalBendTipsAndTricksDesc" devLabel="Use the Bend Line Position to control whether the bend line defines the centerline, start, or end of the bend. Check the Override Rules checkbox to override the value of bend radius and the bend relief options." translation="使用“折弯线位置”可控制折弯线是定义折弯中心线、折弯起点还是折弯终点。选中“替代规则”复选框可替代折弯半径值和折弯释压选项。"/>
	<label commandName="lclzSheetMetalBendTipsAndTricksTips" devLabel="Draw a straight line over a sheet metal body, then select the face and the sketched line to create a bend." translation="在钣金实体上绘制一条直线，然后选择面和绘制的线以创建折弯。"/>
	<label commandName="lclzSheetMetalBendTipsAndTricksTitle" devLabel="Bend Information" translation="折弯信息"/>
	<label commandName="lclzSheetMetalFlange1" devLabel="Use different flange types to create various sheet metal forms:" translation="使用不同的凸缘类型创建各种钣金造型:"/>
	<label commandName="lclzSheetMetalFlange2" devLabel="&amp;nbsp; • &amp;nbsp;Base Flange creates flat sheet metal face." translation="&amp;nbsp; • &amp;nbsp;“基础凸缘”可创建平钣金面。"/>
	<label commandName="lclzSheetMetalFlange3" devLabel="&amp;nbsp; • &amp;nbsp;Edge Flange creates bend and face on the &lt;br&gt;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;edge of existing sheet metal face." translation="&amp;nbsp; • &amp;nbsp;“边凸缘”可在现有钣金面的边上创建&lt;br&gt;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;折弯和面。"/>
	<label commandName="lclzSheetMetalFlange4" devLabel="&amp;nbsp; • &amp;nbsp;Contour Flange constructs multiple bends &lt;br&gt;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;and faces based on open sketch profile." translation="&amp;nbsp; • &amp;nbsp;“轮廓凸缘”可基于开放草图轮廓构造&lt;br&gt;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;多个折弯和面。"/>
	<label commandName="lclzSheetMetalFlatPatternExitPanel" devLabel="Finish Flat Pattern" translation="完成展开模式"/>
	<label commandName="lclzSheetMetalFlatPatternExport" devLabel="Export" translation="导出"/>
	<label commandName="lclzSheetMetalFlatPatternTipsAndTricksDesc" devLabel="The flanges are unfolded based on the K Factor in the sheet metal rule." translation="凸缘将基于钣金规则中的 K 系数展开。"/>
	<label commandName="lclzSheetMetalFlatPatternTipsAndTricksTips" devLabel="Select the face to position on the XY plane. All flanges are unfolded from that face." translation="选择要放置在 XY 平面上的面。所有凸缘都从该面展开。"/>
	<label commandName="lclzSheetMetalFlatPatternTipsAndTricksTitle" devLabel="Flat Pattern Information" translation="展开模式信息"/>
	<label commandName="lclzSheetMetalHem2" devLabel="Folds sheet metal edge back onto itself. You can create the following hems: Open, Flat, Double, Rolled, Teardrop, and Rope." translation="将钣金边折叠回自身。您可以创建以下折边: 开放式折边、平折边、双折边、卷曲折边、泪滴形折边和绳状折边。"/>
	<label commandName="lclzSheetMetalLoft2" devLabel="Creates complex sheet metal shapes between two curves. Commonly used in designing ventilation systems." translation="在两条曲线之间创建复杂的钣金形状。常用于设计通风系统。"/>
	<label commandName="lclzSheetMetalRipTipsAndTricksDesc" devLabel="Use Rip to modify a Lofted Flange to create an open flange that you can then Unfold or create a Flat Pattern from." translation="使用接缝修改放样凸缘以创建开放凸缘，您随后可以将其展开或从其创建展开模式。"/>
	<label commandName="lclzSheetMetalRipTipsAndTricksTips" devLabel="If you have a face or edge selected and then create a Rip feature, the dialog will detect those selections and auto-select them." translation="如果您选择了面或边，然后创建接缝特征，对话框将检测这些选择并自动选择它们。"/>
	<label commandName="lclzSheetMetalRipTipsAndTricksTitle" devLabel="Rip Information" translation="接缝信息"/>
	<label commandName="lclzSheetMetalRules1" devLabel="Rules control the thickness, bend radius, reliefs, and other settings related to sheet metal design." translation="规则可控制厚度、折弯半径、释压以及与钣金设计相关的其他设置。"/>
	<label commandName="lclzSheetMetalRules2" devLabel="Create and edit rules in the active document to change your designs. Save rules to the library to make them accessible in other designs." translation="创建和编辑活动文档中的规则以更改您的设计。将这些规则保存到库以便在其他设计中可以访问它们。"/>
	<label commandName="lclzSheetMetalRulesLibrary1" devLabel="Manage and reuse sheet metal rules across designs." translation="跨设计管理和重用钣金规则。"/>
	<label commandName="lclzSheetMetalRulesLibrary2" devLabel="Create, edit, and save rules in the library to make them accessible in other designs." translation="在库中创建、编辑和保存规则，使其在其他设计中可访问。"/>
	<label commandName="lclzSheetMetalRulesLibraryTipsAndTricksDesc" devLabel="Rules 'In this design' are local to the active document. Rules in the 'Library' are saved in the cloud." translation="“在此设计中”的规则在本地保存在活动文档。“库”中的规则保存在云中。"/>
	<label commandName="lclzSheetMetalRulesLibraryTipsAndTricksTips" devLabel="Select a rule and click 'Edit Rule' to change values. Right-click on the rule name to duplicate, set default, or delete a rule." translation="选择规则，然后单击“编辑规则”以更改值。在规则名称上单击鼠标右键以复制、设置默认值或删除规则。"/>
	<label commandName="lclzSheetMetalRulesLibraryTipsAndTricksTitle" devLabel="Rules Library Information" translation="规则库信息"/>
	<label commandName="lclzSheetMetalRulesTipsAndTricksDesc" devLabel="Rules 'In this design' are local to the active document. Rules in the 'Library' are saved in the cloud." translation="“在此设计中”的规则在本地保存在活动文档。“库”中的规则保存在云中。"/>
	<label commandName="lclzSheetMetalRulesTipsAndTricksTips" devLabel="Select a rule and click 'Edit Rule' to change values. Right-click on the rule name to duplicate, set default, or delete a rule." translation="选择规则，然后单击“编辑规则”以更改值。在规则名称上单击鼠标右键以复制、设置默认值或删除规则。"/>
	<label commandName="lclzSheetMetalRulesTipsAndTricksTitle" devLabel="Rules Information" translation="规则信息"/>
	<label commandName="lclzSheetmetalUnfoldTipsAndTricksDesc" devLabel="Use Unfold to create features across multiple flanges. Use Refold to put flanges back to their previously folded state." translation="使用“展开”可以创建跨多个凸缘的特征。使用“重新折叠”可以将凸缘恢复到其之前的折叠状态。"/>
	<label commandName="lclzSheetmetalUnfoldTipsAndTricksTips" devLabel="Select a stationary face to remain fixed then select the bends to unfold or choose 'Unfold all bends'." translation="选择要保持固定的固定面，然后选择要展开的折弯或选择“展开所有折弯”。"/>
	<label commandName="lclzSheetmetalUnfoldTipsAndTricksTitle" devLabel="Unfold Information" translation="展开信息"/>
	<label commandName="lclzSheetmetalWorkspaceName" devLabel="Sheetmetal Workspace" translation="钣金工作空间"/>
	<label commandName="lclzSheetmetalWorkspaceTitle" devLabel="Creates sheet metal designs. Use these commands to set rules, create sheet metal bodies, and produce manufacturing data." translation="创建钣金设计。使用这些命令可以设置规则，创建钣金实体，并生成制造数据。"/>
	<label commandName="lclzSketchChamfer" devLabel="Chamfer" translation="倒角"/>
	<label commandName="lclzSketchMeshMenu" devLabel="Mesh" translation="网格"/>
	<label commandName="lclzSketchTab" devLabel="SKETCH" translation="草图"/>
	<label commandName="lclzSlot" devLabel="Slot" translation="槽"/>
	<label commandName="lclzStopSketchTT" devLabel="Finish Sketch" translation="完成草图"/>
	<label commandName="lclzSurface" devLabel="Create" translation="创建"/>
	<label commandName="losingBendLines" devLabel="Bend lines will be lost" translation="折弯线将丢失"/>
	<label commandName="pInputBendFaces" devLabel="Select bends to unfold" translation="选择要展开的折弯"/>
	<label commandName="pInputStatinaryEntity" devLabel="Select stationary entity" translation="选择固定实体"/>
	<label commandName="removeFaceSelection" devLabel="This will also clear all bend line selections. &#xA; Do you want to continue?" translation="这还将清除所有折弯线选择。&#xA; 是否要继续？"/>
	<label commandName="smAllowBendRelief" devLabel="Bend Relief On/Off" translation="打开/关闭折弯释压"/>
	<label commandName="smBendAngle" devLabel="Bend Angle" translation="折弯角度"/>
	<label commandName="smBendAngleFlip" devLabel="Flip Bend" translation="翻转折弯"/>
	<label commandName="smBendLinePosition" devLabel="Bend Line Position" translation="折弯线位置"/>
</Resource>