<?xml version="1.0" encoding="utf-8"?><Resource>
	<label commandName=" BendIdColorInput" devLabel="Color" translation="颜色"/>
	<label commandName="0.12in" devLabel="0.12in" translation="0.12in"/>
	<label commandName="0.1in" devLabel="0.1in" translation="0.1in"/>
	<label commandName="0.24in" devLabel="0.24in" translation="0.24in"/>
	<label commandName="10.0mm" devLabel="10.0mm" translation="10.0mm"/>
	<label commandName="2.5mm" devLabel="2.5mm" translation="2.5mm"/>
	<label commandName="3.5mm" devLabel="3.5mm" translation="3.5mm"/>
	<label commandName="5.0mm" devLabel="5.0mm" translation="5.0mm"/>
	<label commandName="7.0mm" devLabel="7.0mm" translation="7.0mm"/>
	<label commandName="AASupport" devLabel="Autodesk Assistant" translation="Autodesk Assistant"/>
	<label commandName="ADFeedbacSurvayTitle" devLabel="Tell us about your experience with Automated Drawings" translation="请告知我们您使用自动化工程图的体验"/>
	<label commandName="ADFeedbackClickable" devLabel="Automated Drawings" translation="自动化工程图"/>
	<label commandName="ADFeedbackPrefix" devLabel="Share your thoughts about" translation="分享您对以下功能的想法:"/>
	<label commandName="ActivityFeed" devLabel="Comments" translation="注释"/>
	<label commandName="Add Sheet Restricted Message" devLabel="Use templates to standardize the creation of drawings so that you can save time and ensure consistency." translation="使用模板来标准化工程图的创建过程，以便您可以节省时间并确保一致性。"/>
	<label commandName="Add Sheet Restricted Title" devLabel="Add Sheet" translation="添加图纸"/>
	<label commandName="AddAnotherAtt" devLabel="Place and Add Another" translation="放置并添加另一个"/>
	<label commandName="AddBreak" devLabel="Add Break" translation="添加折断"/>
	<label commandName="AddImport" devLabel="                                                                   " translation="                                                                   "/>
	<label commandName="AddRevision" devLabel="Add Revision" translation="添加修订"/>
	<label commandName="AddSymbol" devLabel="Add" translation="添加"/>
	<label commandName="AddTitleBlock" devLabel="Add Title Block" translation="添加标题栏"/>
	<label commandName="AddTitleBlockFileDialogFilter" devLabel="AutoCAD drawing files" translation="AutoCAD 图形文件"/>
	<label commandName="AlignedDimDirAndLengthSamePriorityAlgo" devLabel="Aligned Dimension Dir And Length Same Priority Algorithm" translation="对齐标注方向和长度相同优先级算法"/>
	<label commandName="AlignedDimGenAlgo" devLabel="Aligned Dimension Generator Algorithm" translation="对齐标注生成器算法"/>
	<label commandName="AlignedDimSameLengthAndEndPointsWithSameXorYPriorityAlgo" devLabel="Aligned Dimension SameLength And EndPoints With Same XorY PriorityAlgo Algorithm" translation="对齐标注相同长度和端点与相同 X 或 Y 优先级算法"/>
	<label commandName="AllAround" devLabel="All Around" translation="全周边"/>
	<label commandName="AllDimensionColorButton" devLabel="Select Color" translation="选择颜色"/>
	<label commandName="AllDimensionColorInput" devLabel="Color" translation="颜色"/>
	<label commandName="AllLevel" devLabel="All Level" translation="所有级别"/>
	<label commandName="AllLevelTip" devLabel="Creates a parts list containing all components." translation="创建包含所有零部件的明细表。"/>
	<label commandName="AllLevelTypeToolTip" devLabel="Swich to All Level partslist." translation="切换到“所有级别”明细表。"/>
	<label commandName="AllSheetsMulti" devLabel="All Sheets (Multi-File)" translation="所有图纸(多文件)"/>
	<label commandName="AllSheetsSingle" devLabel="All Sheets (Single File)" translation="所有图纸(单文件)"/>
	<label commandName="AngularDimEdgeLengthThreshold_ASME" devLabel="Angular dimension Edge length threshold" translation="角度标注边长阈值"/>
	<label commandName="AngularDimEdgeLengthThreshold_ISO" devLabel="Angular dimension Edge length threshold" translation="角度标注边长阈值"/>
	<label commandName="AngularDimGenAlgo" devLabel="Angular Dimension Generator Algorithm" translation="角度标注生成器算法"/>
	<label commandName="AnimationCreateStoryboardSheet" devLabel="Create Storyboard Sheet" translation="创建故事板图纸"/>
	<label commandName="AnimationDefaultPartListLoc" devLabel="Default Parts List Loc" translation="默认明细表位置"/>
	<label commandName="AnimationIncludePartList" devLabel="Include Parts List" translation="包括明细表"/>
	<label commandName="AnimationWithSingleISO" devLabel="Sheet with Single ISO View" translation="带单个 ISO 视图的图纸"/>
	<label commandName="Animationroup" devLabel="Animation" translation="动画"/>
	<label commandName="Annotation" devLabel="Annotation" translation="标注"/>
	<label commandName="AnnotationDesc" devLabel="Shows the Annotation Object Properties" translation="显示注释对象特性"/>
	<label commandName="AnnotationToolTip" devLabel="Annotation" translation="标注"/>
	<label commandName="AppearanceGroup" devLabel="Appearance" translation="外观"/>
	<label commandName="Approved" devLabel="Approved" translation="已批准"/>
	<label commandName="ApprovedBy" devLabel="Approved by" translation="批准者"/>
	<label commandName="ApprovedDate" devLabel="" translation=""/>
	<label commandName="ArchTick" devLabel=" Architectural Tick" translation=" 建筑标记"/>
	<label commandName="Architectural" devLabel="Architectural" translation="建筑"/>
	<label commandName="ArrowSideDesc" devLabel="Show arrow side properties" translation="显示箭头侧特性"/>
	<label commandName="ArrowSideToolTip" devLabel="Arrow Side" translation="箭头侧"/>
	<label commandName="AspectRatio" devLabel="Aspect Ratio" translation="纵横比"/>
	<label commandName="AssemblyReprensentation" devLabel="Assembly" translation="部件"/>
	<label commandName="AssetReference" devLabel="Instance" translation="实例"/>
	<label commandName="AttCreatedBy" devLabel="Created By" translation="创建者"/>
	<label commandName="AttCreatedDate" devLabel="Created Date" translation="创建日期"/>
	<label commandName="AttCustom" devLabel="Custom" translation="自定义"/>
	<label commandName="AttDrawingScale" devLabel="Drawing Scale" translation="图形比例"/>
	<label commandName="AttDrawnBy" devLabel="Drawn By" translation="绘图员"/>
	<label commandName="AttDrawnDate" devLabel="Drawn Date" translation="绘制日期"/>
	<label commandName="AttManageDrawingNumber" devLabel="Drawing Number" translation="图形编号"/>
	<label commandName="AttManageLifecycle" devLabel="Lifecycle" translation="生命周期"/>
	<label commandName="AttManageRevision" devLabel="Revision" translation="修订"/>
	<label commandName="AttManageState" devLabel="State" translation="状态"/>
	<label commandName="AttModelDescription" devLabel="Description" translation="描述"/>
	<label commandName="AttModelItemNumber" devLabel="Model Item Number" translation="模型项目编号"/>
	<label commandName="AttModelLifecycle" devLabel="Model Lifecycle" translation="模型生命周期"/>
	<label commandName="AttModelMass" devLabel="Mass" translation="质量"/>
	<label commandName="AttModelMaterial" devLabel="Material" translation="材料"/>
	<label commandName="AttModelPartName" devLabel="Part Name" translation="零件名称"/>
	<label commandName="AttModelPartNumber" devLabel="Part Number" translation="零件代号"/>
	<label commandName="AttModelRevision" devLabel="Model Revision" translation="模型修订"/>
	<label commandName="AttModelState" devLabel="Model State" translation="模型状态"/>
	<label commandName="AttModifiedDate" devLabel="Modified Date" translation="修改日期"/>
	<label commandName="AttPaperSize" devLabel="Paper Size" translation="图纸尺寸"/>
	<label commandName="AttProjectFolder" devLabel="Project Folder" translation="项目文件夹"/>
	<label commandName="AttSheetNumber" devLabel="Sheet Number" translation="图纸编号"/>
	<label commandName="AttTitle1" devLabel="Title 1" translation="标题 1"/>
	<label commandName="Auto Dimension Restricted Message" devLabel="Add dimensions automatically so that you can make sure that your drawings are accurate and consistent." translation="自动添加尺寸，以便确保工程图准确且一致。"/>
	<label commandName="Auto Dimension Restricted Title" devLabel="Auto Dimension" translation="自动标注"/>
	<label commandName="AutoArrange" devLabel="Auto Arrange" translation="自动排列"/>
	<label commandName="AutoArrangeDimensions" devLabel="Auto Arrange Dimensions:Main Assembly" translation="自动排列标注:主部件"/>
	<label commandName="AutoArrangeDimensions_Component" devLabel="Auto Arrange Dimensions:Component" translation="自动排列标注:零部件"/>
	<label commandName="AutoArrangeDimensions_FlatPattern" devLabel="Auto Arrange Dimensions:Sheet Metal Flat Pattern" translation="自动排列标注:钣金展开模式"/>
	<label commandName="AutoArrangeDimensions_Folded" devLabel="Auto Arrange Dimensions:Sheet Metal Folded" translation="自动排列标注:钣金折叠"/>
	<label commandName="AutoArrangeDimensions_SA" devLabel="Auto Arrange Dimensions:Sub Assembly" translation="自动排列标注:子部件"/>
	<label commandName="AutoArrangeDimensions_TidyUp" devLabel="Auto Arrange Dimensions:Tidy Up" translation="自动排列尺寸:整理"/>
	<label commandName="AutoArrangeGroup" devLabel="Auto Arrange Setings" translation="自动排列设置"/>
	<label commandName="AutoBreakGroup" devLabel="Auto Break Setings" translation="自动打断设置"/>
	<label commandName="AutoCenterLine" devLabel="Auto centerline" translation="自动中心线"/>
	<label commandName="AutoCenterLineApplyTo" devLabel="Center Lines" translation="中心线"/>
	<label commandName="AutoCenterLineApplyToDesc" devLabel="Controls the hole types that receive automated center lines." translation="控制接收自动中心线的孔类型。"/>
	<label commandName="AutoCenterLineForHole" devLabel="Holes" translation="孔"/>
	<label commandName="AutoCenterLineForRoundCuts" devLabel="Round Cuts" translation="圆形切割"/>
	<label commandName="AutoCenterLineForRoundExtrude" devLabel="Round Extrude" translation="圆形拉伸"/>
	<label commandName="AutoCenterLineGroup" devLabel="Auto Centerline Setings" translation="自动中心线设置"/>
	<label commandName="AutoCenterMark" devLabel="Auto centermark" translation="自动中心标记"/>
	<label commandName="AutoCenterMarkApplyTo" devLabel="Center Marks" translation="中心标记"/>
	<label commandName="AutoCenterMarkApplyToDesc" devLabel="Controls the hole types that receive automated center marks." translation="控制接收自动中心标记的孔类型。"/>
	<label commandName="AutoCenterMarkForFilet" devLabel="Fillet" translation="圆角"/>
	<label commandName="AutoCenterMarkForHole" devLabel="Holes" translation="孔"/>
	<label commandName="AutoCenterMarkForRoundCuts" devLabel="Round Cuts" translation="圆形切割"/>
	<label commandName="AutoCenterMarkForRoundExtrude" devLabel="Round Extrude" translation="圆形拉伸"/>
	<label commandName="AutoCenterMarkGroup" devLabel="Auto Centermark Setings" translation="自动中心标记设置"/>
	<label commandName="AutoCenterMarkPattern" devLabel="Pattern" translation="阵列"/>
	<label commandName="AutoCmFilletMaxRadius" devLabel="Fillet Max Radius" translation="圆角最大半径"/>
	<label commandName="AutoCmFilletMinRadius" devLabel="Fillet Min Radius" translation="圆角最小半径"/>
	<label commandName="AutoCutGroup" devLabel="Auto Cut Setings" translation="自动切割设置"/>
	<label commandName="AutoDimRecipeDemoImage" devLabel="Recipe Example" translation="配制示例"/>
	<label commandName="AutoDrawingGenerationGoup" devLabel="Automated Drawing Generation" translation="自动生成工程图"/>
	<label commandName="AutoHoleNote" devLabel="Auto Hole Note" translation="自动孔注释"/>
	<label commandName="AutoHoletGroup" devLabel="Auto Hole Note Setings" translation="自动孔注释设置"/>
	<label commandName="AutoNest" devLabel="Auto Nest" translation="自动嵌套"/>
	<label commandName="AutoNestGroup" devLabel="Auto Nest Setings" translation="自动嵌套设置"/>
	<label commandName="AutoPrefCancelTxtForNewTemplate" devLabel="Save as New Drawing Template" translation="另存为新工程图模板"/>
	<label commandName="AutoPrefCancelTxtForSelTemplate" devLabel="Update to selected template" translation="更新到选定模板"/>
	<label commandName="AutoPreferences" devLabel="Automation Preferences" translation="自动化首选项"/>
	<label commandName="AutoPreferencesDesc" devLabel="Lets you review and control the Drawing Automation preferences." translation="用于查看和控制“工程图自动化”首选项。"/>
	<label commandName="AutoRotateForManualView" devLabel="Enable for Manual View" translation="为手动视图启用"/>
	<label commandName="AutoRotateGroup" devLabel="Auto Rotate Setings" translation="自动旋转设置"/>
	<label commandName="AutoScaleFitOption" devLabel="Fit Option" translation="布满选项"/>
	<label commandName="AutoScaleFitOption_MOVE_TO_BIGGER_SHEET" devLabel="Move To Bigger Sheet" translation="移至较大的图纸"/>
	<label commandName="AutoScaleFitOption_NO_OP" devLabel="None" translation="无"/>
	<label commandName="AutoScaleFitOption_SCALE_DOWN" devLabel="Scale Down" translation="缩小"/>
	<label commandName="AutoScaleGroup" devLabel="Auto Scale Setings" translation="自动缩放设置"/>
	<label commandName="AutoSheetSizeGroup" devLabel="Auto Sheet Size Setings" translation="自动图纸尺寸设置"/>
	<label commandName="AutoViewGroup" devLabel="Auto View Setings" translation="自动视图设置"/>
	<label commandName="AutocadDWG" devLabel="AutoCAD DWG" translation="AutoCAD DWG"/>
	<label commandName="AutocadDXF" devLabel="AutoCAD DXF" translation="AutoCAD DXF"/>
	<label commandName="Automatic" devLabel="Automatic" translation="自动"/>
	<label commandName="Automatic Creation of Drawing Restricted Message" devLabel="Automatically generate drawings from 3D models so that you can save time and reduce potential errors." translation="从三维模型自动生成工程图，以便节省时间并减少潜在错误。"/>
	<label commandName="Automatic Creation of Drawing Restricted Title" devLabel="Auto Creation of Drawing" translation="自动创建工程图"/>
	<label commandName="AutomaticBendTipTable." devLabel="Creates a bend table for the selected sheet metal flat pattern reference." translation="为选定的钣金展开模式参考创建折弯表。"/>
	<label commandName="AutomaticPartListTipTable." devLabel="Creates an empty table, parts list or bend table depending on the contents of the current sheet or selected reference." translation="根据当前图纸或选定参考的内容创建空表、明细表或折弯表。"/>
	<label commandName="AutomaticTip" devLabel="Creates a leader, hole and thread note or bend note depending on the selected edge." translation="根据选定的边创建引线、孔和螺纹注释或折弯注释。"/>
	<label commandName="AutomaticTipTable." devLabel="Creates an empty table, parts list or bend table depending on the contents of the current sheet or selected reference." translation="根据当前图纸或选定参考的内容创建空表、明细表或折弯表。"/>
	<label commandName="AutomationGroupStart" devLabel="Automation" translation="自动化"/>
	<label commandName="AutomationPreferencesButton" devLabel="Automation Preferences" translation="自动化首选项"/>
	<label commandName="AutomationSettingsDesc" devLabel="Shows the Automation Settings" translation="显示自动化设置"/>
	<label commandName="AutomationSettingsPushedToTemplate" devLabel="Automation settings have successfully been updated in the template you selected " translation="自动化设置已在您选择的模板中成功更新"/>
	<label commandName="AutomationSettingsTip" devLabel="Automation Settings" translation="自动化设置"/>
	<label commandName="AuxiliaryViewDialogTitle" devLabel="AUXILIARY VIEW" translation="辅助视图"/>
	<label commandName="Back" devLabel="Back" translation="背面"/>
	<label commandName="Balloon" devLabel="Balloon" translation="引出序号"/>
	<label commandName="BalloonLevelInput" devLabel="Level" translation="级别"/>
	<label commandName="BalloonsColorButton" devLabel="Select Color" translation="选择颜色"/>
	<label commandName="BalloonsColorInput" devLabel="Color" translation="颜色"/>
	<label commandName="BaselineRecipeTitle" devLabel="Baseline Dimensions" translation="基线标注"/>
	<label commandName="Behaviour" devLabel="Behaviour" translation="行为"/>
	<label commandName="Bend Note" devLabel="Bend Note" translation="折弯注释"/>
	<label commandName="BendCenterColorButton" devLabel="Select Color" translation="选择颜色"/>
	<label commandName="BendCenterColorInput" devLabel="Color" translation="颜色"/>
	<label commandName="BendExtents" devLabel="Bend Extents" translation="折弯范围"/>
	<label commandName="BendExtentsDesc" devLabel="Adds bend extents to help recognise full width bends." translation="添加折弯范围以帮助识别全宽折弯。"/>
	<label commandName="BendIdColorButton" devLabel="Select Color" translation="选择颜色"/>
	<label commandName="BendIdentifier" devLabel="Bend Identifier" translation="折弯标识符"/>
	<label commandName="BendNoteTip" devLabel="Creates a bend note for the selected bend centreline." translation="为选定的折弯中心线创建折弯注释。"/>
	<label commandName="BendNotesColorButton" devLabel="Select Color" translation="选择颜色"/>
	<label commandName="BendNotesColorInput" devLabel="Color" translation="颜色"/>
	<label commandName="BendTableColorButton" devLabel="Select Color" translation="选择颜色"/>
	<label commandName="BendTableColorInput" devLabel="Color" translation="颜色"/>
	<label commandName="BendTableTip" devLabel="Creates a bend table for the selected sheet metal flat pattern reference." translation="为选定的钣金展开模式参考创建折弯表。"/>
	<label commandName="BestPerfo" devLabel="Best Performance" translation="最佳性能"/>
	<label commandName="BestQuality" devLabel="Best Quality" translation="最佳质量"/>
	<label commandName="BlockEditAttributeGroup" devLabel="Attributes" translation="属性"/>
	<label commandName="BlockEditDesignInput" devLabel="Design" translation="设计"/>
	<label commandName="BlockEditMassPrecisionInput" devLabel="Mass Precision" translation="质量精度"/>
	<label commandName="BlockEditMassUnitInput" devLabel="Mass Units" translation="质量单位"/>
	<label commandName="BlockEditReferenceGroup" devLabel="Reference" translation="参考"/>
	<label commandName="BlockEditSourceInput" devLabel="Source" translation="源"/>
	<label commandName="BorderZoneInputTooltip" devLabel="Zones must be a positive even number" translation="区域数必须为正偶数"/>
	<label commandName="Bottom" devLabel="Bottom" translation="底部"/>
	<label commandName="BottomLeft" devLabel="BottomLeft" translation="左下"/>
	<label commandName="BottomRight" devLabel="BottomRight" translation="右下"/>
	<label commandName="BoxBlank" devLabel=" Box" translation=" 框"/>
	<label commandName="BoxFilled" devLabel=" Box Filled" translation=" 实心框"/>
	<label commandName="BreakDistance" devLabel="Break Distance" translation="打断距离"/>
	<label commandName="BreakDistance_ASME" devLabel="Break Distance" translation="打断距离"/>
	<label commandName="BreakDistance_ISO" devLabel="Break Distance" translation="打断距离"/>
	<label commandName="BreakHorizontal" devLabel="Horizontal" translation="水平"/>
	<label commandName="BreakInheritance" devLabel="Break Inheritance" translation="打断继承"/>
	<label commandName="BreakOrientation" devLabel="Orientation" translation="方向"/>
	<label commandName="BreakVertical" devLabel="Vertical" translation="竖直"/>
	<label commandName="BreakWindow" devLabel="Break Window" translation="打断窗口"/>
	<label commandName="BreakWindowEnable" devLabel="Enable Window" translation="启用窗口"/>
	<label commandName="BreakWindowParam" devLabel="Break Parameter" translation="打断参数"/>
	<label commandName="BreakoutSectionViewDialogTitle" devLabel="Breakout Section View" translation="局部剖视图"/>
	<label commandName="BreakoutViewCmdSelectDrawingView" devLabel="View" translation="视图"/>
	<label commandName="BreakoutViewHalfDepthTooltip" devLabel="Measures half of current model depth" translation="测量当前模型深度的一半"/>
	<label commandName="BrokenViewCmdHorizontal" devLabel="Horizontal" translation="水平"/>
	<label commandName="BrokenViewCmdHorizontalTooltip" devLabel="Horizontal" translation="水平"/>
	<label commandName="BrokenViewCmdOrientation" devLabel="Orientation" translation="方向"/>
	<label commandName="BrokenViewCmdSelectDrawingView" devLabel="Drawing View" translation="工程视图"/>
	<label commandName="BrokenViewCmdSelectEndPoint" devLabel="End Point" translation="终点"/>
	<label commandName="BrokenViewCmdSelectGap" devLabel="Gap" translation="间隙"/>
	<label commandName="BrokenViewCmdSelectStartPoint" devLabel="Start Point" translation="起点"/>
	<label commandName="BrokenViewCmdVertical" devLabel="Vertical" translation="竖直"/>
	<label commandName="BrokenViewCmdVerticalTooltip" devLabel="Vertical" translation="竖直"/>
	<label commandName="BrokenViewColorButton" devLabel="Select Color" translation="选择颜色"/>
	<label commandName="BrokenViewColorInput" devLabel="Color" translation="颜色"/>
	<label commandName="Browser" devLabel="Browser" translation="浏览器"/>
	<label commandName="BulletOptions" devLabel=" " translation=" "/>
	<label commandName="Bullets" devLabel="Bullets" translation="项目符号"/>
	<label commandName="CENTER" devLabel="CENTER" translation="中心"/>
	<label commandName="CENTER2" devLabel="CENTER2" translation="中心 2"/>
	<label commandName="CancelButton" devLabel="Cancel" translation="取消"/>
	<label commandName="CancelCreate3DPCBAndDrawing" devLabel="Cancel" translation="取消"/>
	<label commandName="CannotShowBreakoutOnMeshMessage" devLabel="&lt;b&gt;File contains mesh bodies which cannot show breakout sections.&lt;/b&gt;" translation="&lt;b&gt;文件包含无法显示局部剖面的网格实体。&lt;/b&gt;"/>
	<label commandName="CannotShowBreakoutOnMeshTooltip" devLabel="File contains mesh bodies which cannot show breakout sections" translation="文件包含无法显示局部剖面的网格实体"/>
	<label commandName="CellMapBasedLoopGeneratorAlgorithm" devLabel="Loop Generator Algorithm" translation="回路生成器算法"/>
	<label commandName="CenterLinesMarksColorButton" devLabel="Select Color" translation="选择颜色"/>
	<label commandName="CenterLinesMarksColorInput" devLabel="Color" translation="颜色"/>
	<label commandName="CenterMarkDimGenAlgo" devLabel="Center Mark Dim Genrator Algorithm" translation="中心标记标注生成器算法"/>
	<label commandName="CenterPatternReferenceEdgeSelectionInput" devLabel="Reference Edge" translation="参考边"/>
	<label commandName="CenterPatternSelectionInput" devLabel="Selection" translation="选择"/>
	<label commandName="CentermarkBaslineRecipeTitle" devLabel="CenterMark Baseline&#xA;Dimensions" translation="中心标记基线&#xA;标注"/>
	<label commandName="CentermarkChainRecipeTitle" devLabel="CenterMark Chain&#xA;Dimensions" translation="中心标记链&#xA;标注"/>
	<label commandName="ChainRecipeTitle" devLabel="Chain Dimensions" translation="链标注"/>
	<label commandName="ChamferDimGenAlgo" devLabel="Chamfer Dimension Generator Algorithm" translation="倒角标注生成器算法"/>
	<label commandName="ChamferDimPriorityAlgo" devLabel="Chamfer Dimension Priority Algorithm" translation="倒角标注优先级算法"/>
	<label commandName="ChangesSynced" devLabel="&lt;b&gt;Changes to external references have been synced.&lt;/b&gt;" translation="&lt;b&gt;对外部参考的更改已同步。&lt;/b&gt;"/>
	<label commandName="ChatSupport" devLabel="Autodesk Assistant" translation="Autodesk Assistant"/>
	<label commandName="CheckBoxesToApplytTitleBlock" devLabel="Check Boxes to Apply Title Block" translation="用于应用标题栏的复选框"/>
	<label commandName="Checked" devLabel="Checked" translation="选中"/>
	<label commandName="CheckedDate" devLabel="" translation=""/>
	<label commandName="ChooseAnother" devLabel="Choose another file" translation="选择其他文件"/>
	<label commandName="CircularDimGenAlgorithm" devLabel="Circular Dim Algorithm" translation="圆形标注算法"/>
	<label commandName="Closed" devLabel=" Closed" translation=" 闭合"/>
	<label commandName="Closed Filled" devLabel=" Closed Filled" translation=" 实心闭合"/>
	<label commandName="ClosedBlank" devLabel=" Closed Blank" translation=" 空心闭合"/>
	<label commandName="CloudStoreMustBeLoggedIn" devLabel="You must be logged in to perform this action." translation="您必须登录才能执行此操作。"/>
	<label commandName="Code" devLabel="Code" translation="代码"/>
	<label commandName="ColorTitle" devLabel="Color Picker" translation="颜色拾取器"/>
	<label commandName="ColumnDown" devLabel="Down" translation="向下"/>
	<label commandName="ColumnUp" devLabel="Up" translation="向上"/>
	<label commandName="Columns" devLabel="Columns" translation="列"/>
	<label commandName="ColumnsTable" devLabel="Columns" translation="列"/>
	<label commandName="Commits" devLabel="Commits" translation="提交"/>
	<label commandName="CompISOWithOrthoViews" devLabel="Add ISO View with Ortho Views" translation="添加 ISO 视图与正交视图"/>
	<label commandName="CompSheetCreate" devLabel="Create Component Sheet" translation="创建零部件图纸"/>
	<label commandName="CompWithOrthoViews" devLabel="Sheet With Orthogonal Views" translation="具有正交视图的图纸"/>
	<label commandName="ComponentGroup" devLabel="Component" translation="零部件"/>
	<label commandName="ComponentReprensentation" devLabel="Component" translation="零部件"/>
	<label commandName="ConfigAspect" devLabel="Configured Aspect" translation="配置的方面"/>
	<label commandName="ConfigColumnOrderTab" devLabel="Column Order" translation="列顺序"/>
	<label commandName="ConfigDropdownKey" devLabel="Configuration" translation="配置"/>
	<label commandName="ConfigPropertiesLabel" devLabel="Configuration Aspects" translation="配置方面"/>
	<label commandName="ConfigTableColorButton" devLabel="Select Color" translation="选择颜色"/>
	<label commandName="ConfigTableColorInput" devLabel="Color" translation="颜色"/>
	<label commandName="ConfigTableTab" devLabel="Table" translation="表格"/>
	<label commandName="ConfigTableTip" devLabel="Creates a configuration table." translation="创建配置表。"/>
	<label commandName="Continue" devLabel="Continue" translation="继续"/>
	<label commandName="Continue Editing" devLabel="Continue Editing" translation="继续编辑"/>
	<label commandName="ContinueCreate3DPCBAndDrawing" devLabel="Continue" translation="继续"/>
	<label commandName="Continuous" devLabel="Continuous" translation="连续"/>
	<label commandName="CopyTransformPtTooltip" devLabel="Point to Point" translation="点到点"/>
	<label commandName="Create3DPCBAndDrawing" devLabel="Create 3D PCB and Drawing" translation="创建三维 PCB 和工程图"/>
	<label commandName="Create3DPCBAndDrawingText" devLabel="Electronics Drawings require a 3D PCB to place model views. Fusion will create a 3D PCB before creating a drawing." translation="电子器件工程图需要三维 PCB 才能放置模型视图。Fusion 将在创建工程图之前创建三维 PCB。"/>
	<label commandName="CreateDrawingFromPreviousVersion" devLabel="Create Drawing from previous version instead?" translation="是否改为从早期版本创建工程图？"/>
	<label commandName="CreateDrawingFromPreviousVersion_ccy" devLabel="Create drawing from previous change instead?" translation="是否改为从先前的更改创建工程图？"/>
	<label commandName="CreateNewDrawingDocumentUnavailable" devLabel="Create Drawing (unavailable)" translation="创建工程图(不可用)"/>
	<label commandName="CreateNewDrawingInput" devLabel="Create New" translation="新建"/>
	<label commandName="CreateNewRef" devLabel="Create New" translation="新建"/>
	<label commandName="CreateSheetFor" devLabel="Create sheets for " translation="为以下项创建图纸: "/>
	<label commandName="CreatedBy" devLabel="Created by" translation="创建者"/>
	<label commandName="CreatedDate" devLabel="" translation=""/>
	<label commandName="CropViewCmdSelectDrawingView" devLabel="View" translation="视图"/>
	<label commandName="CropViewOutlineColorButton" devLabel="Select Color" translation="选择颜色"/>
	<label commandName="CropViewOutlineColorInput" devLabel="Color" translation="颜色"/>
	<label commandName="CurrentSheet" devLabel="Current Sheet" translation="当前图纸"/>
	<label commandName="Custom" devLabel="Custom" translation="自定义"/>
	<label commandName="CustomTablesColorButton" devLabel="Select Color" translation="选择颜色"/>
	<label commandName="CustomTablesColorInput" devLabel="Color" translation="颜色"/>
	<label commandName="CustomTag" devLabel="Custom" translation="自定义"/>
	<label commandName="CutBody" devLabel="Body Participating In Cut" translation="参与剪切的实体"/>
	<label commandName="CutComponent" devLabel="Component Participating In Cut" translation="参与剪切的零部件"/>
	<label commandName="CutInheritance" devLabel="Inherit Section" translation="继承剖面"/>
	<label commandName="DABottomLeft" devLabel="Bottom Left" translation="左下"/>
	<label commandName="DABottomRight" devLabel="Bottom Right" translation="右下"/>
	<label commandName="DADatumLocation" devLabel="Datum Location" translation="基准位置"/>
	<label commandName="DADecreaseControl" devLabel="Decrease" translation="减小"/>
	<label commandName="DADecreaseControlToolTip" devLabel="Decreases density of dimensions." translation="减小标注的密度。"/>
	<label commandName="DADensityControl" devLabel="Density" translation="密度"/>
	<label commandName="DADensityControlToolTip" devLabel="Controls density of dimensions." translation="控制标注的密度。"/>
	<label commandName="DADensityInactive" devLabel="The data is not available." translation="数据不可用。"/>
	<label commandName="DADimensions" devLabel="dimensions" translation="标注"/>
	<label commandName="DAIncreaseControl" devLabel="Increase" translation="增大"/>
	<label commandName="DAIncreaseControlToolTip" devLabel="Increases density of dimensions." translation="增大标注的密度。"/>
	<label commandName="DAManual" devLabel="Manual" translation="手动"/>
	<label commandName="DAOriginLocation" devLabel="Origin Location" translation="原点位置"/>
	<label commandName="DASelectDatum" devLabel="Select Datum" translation="选择基准"/>
	<label commandName="DATopLeft" devLabel="Top Left" translation="左上"/>
	<label commandName="DATopRight" devLabel="Top Right" translation="右上"/>
	<label commandName="DLBottomLeft" devLabel="Bottom-Left Corner" translation="左下角"/>
	<label commandName="DLBottomRight" devLabel="Bottom-Right Corner" translation="右下角"/>
	<label commandName="DLTopLeft" devLabel="Top-Left Corner" translation="左上角"/>
	<label commandName="DLTopRight" devLabel="Top-Right Corner" translation="右上角"/>
	<label commandName="DOBottomLeft" devLabel="Bottom-Left Corner" translation="左下角"/>
	<label commandName="DOBottomRight" devLabel="Bottom-Right Corner" translation="右下角"/>
	<label commandName="DOTopLeft" devLabel="Top-Left Corner" translation="左上角"/>
	<label commandName="DOTopRight" devLabel="Top-Right Corner" translation="右上角"/>
	<label commandName="DSAutomatic" devLabel="Automatic" translation="自动"/>
	<label commandName="DSAutomaticDesc" devLabel="Automatically selects the best dimension strategy." translation="自动选择最佳尺寸标注策略。"/>
	<label commandName="DSBaseline" devLabel="Baseline" translation="基线"/>
	<label commandName="DSBaselineDesc" devLabel="Adds multiple linear dimensions that measure distance from a datum point." translation="添加多个用于测量距基准点的距离的线性尺寸标注。"/>
	<label commandName="DSChain" devLabel="Chain" translation="链"/>
	<label commandName="DSChainDesc" devLabel="Adds a series of linear dimensions that measure distance from the end of the previous dimension." translation="添加一系列线性尺寸标注，用于测量距上一尺寸标注末端的距离。"/>
	<label commandName="DSOrdinate" devLabel="Ordinate" translation="坐标"/>
	<label commandName="DSOrdinateDesc" devLabel="Adds dimensions that are measured in the X or Y direction, relative to an origin point." translation="添加在 X 或 Y 方向上相对于原点测量的尺寸标注。"/>
	<label commandName="DSOverall" devLabel="Overall" translation="整体"/>
	<label commandName="DSOverallDesc" devLabel="Adds the overall dimensions of the object." translation="添加对象的整体尺寸标注。"/>
	<label commandName="DSSymmetric" devLabel="Symmetric" translation="对称"/>
	<label commandName="DSSymmetricDesc" devLabel="Adds dimensions that symmetrically measure distances from the center line." translation="添加对称测量距中心线的距离的尺寸标注。"/>
	<label commandName="DSSymmetricWithBaseLine" devLabel="Symmetric With Baseline" translation="与基线对称"/>
	<label commandName="DSSymmetricWithBaseLineDesc" devLabel="Adds dimensions with combined symmetric and baseline strategy." translation="使用对称和基线策略组合添加尺寸标注。"/>
	<label commandName="DSSymmetricWithOrdinate" devLabel="Symmetric With Ordinate" translation="与坐标对称"/>
	<label commandName="DSSymmetricWithOrdinateDesc" devLabel="Adds dimensions with combined symmetric and ordinate strategy." translation="使用对称和坐标组合策略添加尺寸标注。"/>
	<label commandName="DWG File" devLabel="DWG File" translation="DWG 文件"/>
	<label commandName="DXFFilter2010" devLabel="AutoCAD 2010 Drawing (*.dxf)" translation="AutoCAD 2010 工程图(*.dxf)"/>
	<label commandName="DXFFilter2013" devLabel="AutoCAD 2013 Drawing (*.dxf)" translation="AutoCAD 2013 工程图(*.dxf)"/>
	<label commandName="DashboardCreateFusionDrawingCommand" devLabel="Dashboard Create Drawing" translation="面板创建工程图"/>
	<label commandName="DateOfIssue" devLabel="Date of issue" translation="发布日期"/>
	<label commandName="DatumBlank" devLabel=" Datum Triangle" translation=" 基准三角形"/>
	<label commandName="DatumFilled" devLabel=" Datum Triangle Filled" translation=" 实心基准三角形"/>
	<label commandName="Decimal" devLabel="Decimal" translation="小数"/>
	<label commandName="DefaultSelectionInputText" devLabel="Select" translation="选择"/>
	<label commandName="DefaultSketchName" devLabel="Sketch Symbol" translation="草图符号"/>
	<label commandName="DefaultSketchSymbolName" devLabel="Sketch Symbol" translation="草图符号"/>
	<label commandName="DefaultSymbol" devLabel="Sketch Symbol" translation="草图符号"/>
	<label commandName="DefinedSize" devLabel="Defined Size" translation="定义的尺寸"/>
	<label commandName="DeleteRevision" devLabel="Delete Revision" translation="删除修订"/>
	<label commandName="DeleteSketchSymbol" devLabel="Delete" translation="删除"/>
	<label commandName="DeleteStoryboardWarningTitle" devLabel="Missing/Deleted Storyboard Reference(s)" translation="缺少/已删除故事板参考"/>
	<label commandName="DeleteStoryboardsWarningMsg" devLabel="&lt;p&gt;&lt;b&gt;Storyboard(s) that were referenced in the drawing are no longer able to be located.&lt;/b&gt;&lt;/p&gt;&lt;p&gt;Referenced Storyboard(s) either are not part of this configuration (if it is a configured design), or they have been deleted. As a result, views referencing these storyboards will be deleted.&lt;/p&gt;&lt;p&gt;&lt;/p&gt;" translation="&lt;p&gt;&lt;b&gt;在工程图中参考的故事板不再能找到。&lt;/b&gt;&lt;/p&gt;&lt;p&gt;参考的故事板不是此配置(如果它是已配置的设计)的一部分，或者已被删除。因此，将删除参考这些故事板的视图。&lt;/p&gt;&lt;p&gt;&lt;/p&gt;"/>
	<label commandName="DeleteTitleBlock" devLabel="Delete" translation="删除"/>
	<label commandName="Depth" devLabel="Section Depth" translation="剖面深度"/>
	<label commandName="DetailBoundariesColorButton" devLabel="Select Color" translation="选择颜色"/>
	<label commandName="DetailBoundariesColorInput" devLabel="Color" translation="颜色"/>
	<label commandName="Detect and Omit Fasteners Restricted message" devLabel="Fasteners will be detected and omitted from the drawing." translation="紧固件将被检测出来，并从工程图中忽略。"/>
	<label commandName="Detect and Omit Fasteners Restricted title" devLabel="Detect and Omit Fasteners" translation="检测并忽略紧固件"/>
	<label commandName="DiffenentXYPriorityReducingAlgo" devLabel="Diffenent XY Priority Reducing Algorithm" translation="不同 XY 优先级降低算法"/>
	<label commandName="DimGapDesc" devLabel="Specify gap distance for extension lines." translation="指定延长线的间隙距离。"/>
	<label commandName="DimGapValueInput" devLabel="Gap Distance" translation="间隙距离"/>
	<label commandName="DimGapValueTooltip" devLabel="Extension Line Gap Distance" translation="延长线间隙距离"/>
	<label commandName="DimToDimDistance" devLabel="Dim to Dim Distance" translation="标注到标注距离"/>
	<label commandName="DimensionAlgos" devLabel="Disabled Dimension Algorithms" translation="已禁用标注算法"/>
	<label commandName="DimensionEdgeGeneratorAlgorithm" devLabel="Edge Generator Algorithm" translation="边生成器算法"/>
	<label commandName="DimensionGroup" devLabel="Dimension Settings" translation="标注设置"/>
	<label commandName="DimensionPointGeneratorAlgorithm" devLabel="Point Generator Algorithm" translation="点生成器算法"/>
	<label commandName="DimensionPriorityModifierByStrategyAlgo" devLabel="Dimension Priority Modifier By Strategy" translation="按策略的标注优先级修改器"/>
	<label commandName="DimensionRange" devLabel="Dimension Range (0-100)" translation="标注范围(0-100)"/>
	<label commandName="DimensionRegionBasedFilterAlgorithm" devLabel="Dimension Region Based Filter Algorithm" translation="基于标注区域的过滤器算法"/>
	<label commandName="Direction" devLabel="Direction" translation="方向"/>
	<label commandName="Direction_NoSymbol" devLabel="No values" translation="无值"/>
	<label commandName="Direction_Side" devLabel="Horizontal Direction" translation="水平方向"/>
	<label commandName="Direction_Top" devLabel="Vertical direction" translation="垂直方向"/>
	<label commandName="Direction_Undefined" devLabel="Direction undefined" translation="方向未定义"/>
	<label commandName="DisassociatedAnnotations" devLabel="Disassociated annotations" translation="已解除关联的标注"/>
	<label commandName="Display in table" devLabel="Display in table" translation="在表中显示"/>
	<label commandName="Distance" devLabel="Distance" translation="距离"/>
	<label commandName="Distribute" devLabel="Distribute" translation="分发"/>
	<label commandName="DocumentSettingsDesc" devLabel="Shows the Document Settings" translation="显示文档设置"/>
	<label commandName="DocumentSettingsToolTip" devLabel="Document Settings" translation="文档设置"/>
	<label commandName="DocumentStatus" devLabel="Document status" translation="文档状态"/>
	<label commandName="DocumentType" devLabel="Document type" translation="文档类型"/>
	<label commandName="Documentation Environment" devLabel="Drawing" translation="工程图"/>
	<label commandName="DoneManageSymbols" devLabel="Done" translation="完成"/>
	<label commandName="DonnotShowMeAgainCheckBoxCaption" devLabel="Don't show me this again." translation="不再显示此消息。"/>
	<label commandName="Dot" devLabel=" Dot" translation=" 圆点"/>
	<label commandName="DotBlank" devLabel=" Dot Blank" translation=" 空心圆点"/>
	<label commandName="DotSmall" devLabel=" Dot Small" translation=" 小圆点"/>
	<label commandName="DrawingAlignedDimTypeInput" devLabel="Aligned" translation="对齐"/>
	<label commandName="DrawingAutomationPreferenceCmdD" devLabel="Automation Preferences" translation="自动化首选项"/>
	<label commandName="DrawingChangeAwarenessComponentsSelInput" devLabel="Components" translation="零部件"/>
	<label commandName="DrawingDebug" devLabel="Drawing Debug" translation="工程图调试"/>
	<label commandName="DrawingDebugCommandDesc" devLabel="Show some useful information for debugging or testing" translation="显示一些有用的信息以进行调试或测试"/>
	<label commandName="DrawingDiameterDimTypeInput" devLabel="Diameter" translation="直径"/>
	<label commandName="DrawingDimensionArrangeCmdAlign" devLabel="Align" translation="对齐"/>
	<label commandName="DrawingDimensionArrangeCmdAlignTooltip" devLabel="Align" translation="对齐"/>
	<label commandName="DrawingDimensionArrangeCmdArrangementType" devLabel="Type" translation="类型"/>
	<label commandName="DrawingDimensionArrangeCmdSelctSpacing" devLabel="Spacing" translation="间距"/>
	<label commandName="DrawingDimensionArrangeCmdSelectBaseDimension" devLabel="Base dimension" translation="基准标注"/>
	<label commandName="DrawingDimensionArrangeCmdSelectDimensionsToMove" devLabel="Dimensions to move" translation="要移动的标注"/>
	<label commandName="DrawingDimensionArrangeCmdStackTooltip" devLabel="Stack" translation="堆叠"/>
	<label commandName="DrawingDimensionCmdStack" devLabel="Stack" translation="堆叠"/>
	<label commandName="DrawingExportwoRefresh" devLabel="Export" translation="导出"/>
	<label commandName="DrawingFormat" devLabel="Format" translation="格式"/>
	<label commandName="DrawingHorizontalLinearDimTypeInput" devLabel="Horizontal" translation="水平"/>
	<label commandName="DrawingInsertConfigCancel" devLabel="Cancel" translation="取消"/>
	<label commandName="DrawingInsertConfigDialog" devLabel="Select Configuration" translation="选择配置"/>
	<label commandName="DrawingInsertConfigOK" devLabel="OK" translation="确定"/>
	<label commandName="DrawingOpenDocumentFail_OtherReasons" devLabel="Can't open this file. The file is corrupt or contains migration issues. &#xA;Please send the file to Autodesk Support for assistance." translation="无法打开此文件。此文件已损坏或存在移植问题。 &#xA;请将此文件发送给 Autodesk 支持人员以获取帮助。"/>
	<label commandName="DrawingOptionTooltip" devLabel="&lt;b&gt;Drawing&lt;/b&gt;&lt;br&gt;&lt;br&gt;Switches the configuration for all views of selected configuration on all sheets in the drawing." translation="&lt;b&gt;工程图&lt;/b&gt;&lt;br&gt;&lt;br&gt;在工程图的所有图纸上切换选定配置的所有视图的配置。"/>
	<label commandName="DrawingOsnapCenterInput" devLabel="Center" translation="中心"/>
	<label commandName="DrawingOsnapCurveXYMinMax" devLabel="Curve X/Y Min/Max" translation="曲线 X/Y 最小值/最大值"/>
	<label commandName="DrawingOsnapEndpointInput" devLabel="Endpoint" translation="端点"/>
	<label commandName="DrawingOsnapIntersectionInput" devLabel="Intersection" translation="交点"/>
	<label commandName="DrawingOsnapMidpointInput" devLabel="Midpoint" translation="中点"/>
	<label commandName="DrawingOsnapNoneInput" devLabel="None" translation="无"/>
	<label commandName="DrawingOsnapPointInput" devLabel="Point" translation="点"/>
	<label commandName="DrawingOsnapQuadrantInput" devLabel="Quadrant" translation="象限点"/>
	<label commandName="DrawingOsnapTangentInput" devLabel="Tangent" translation="相切"/>
	<label commandName="DrawingPrintDialog_NumOfCopiesLable" devLabel="Number of Copies" translation="份数"/>
	<label commandName="DrawingPrintDialog_Offset_X" devLabel="X" translation="X"/>
	<label commandName="DrawingPrintDialog_Offset_Y" devLabel="Y" translation="Y"/>
	<label commandName="DrawingPrintDialog_Orientation" devLabel="Orientation" translation="方向"/>
	<label commandName="DrawingPrintDialog_PaperSizes" devLabel="Paper Size" translation="图纸尺寸"/>
	<label commandName="DrawingPrintDialog_PrintLineWidthsLabel" devLabel="Print Line Widths" translation="打印线宽"/>
	<label commandName="DrawingPrintDialog_PrintToFolder" devLabel="Print to Folder" translation="打印到文件夹"/>
	<label commandName="DrawingPrintDialog_Range" devLabel="Define Range" translation="定义范围"/>
	<label commandName="DrawingPrintDialog_ShowPreviewCheck" devLabel="Print Preview" translation="打印预览"/>
	<label commandName="DrawingPrintRefresh" devLabel="Refresh" translation="刷新"/>
	<label commandName="DrawingPrintwoRefresh" devLabel="Print" translation="打印"/>
	<label commandName="DrawingRadiusDimTypeInput" devLabel="Radius" translation="半径"/>
	<label commandName="DrawingSheetCreateNew" devLabel="Create new sheet" translation="创建新图纸"/>
	<label commandName="DrawingSheetInput" devLabel="Sheet" translation="图纸"/>
	<label commandName="DrawingSheets" devLabel="Sheets" translation="图纸"/>
	<label commandName="DrawingShowChangeAwarenessCmdToolbar" devLabel="Change Summary" translation="更改概要"/>
	<label commandName="DrawingShowChangeAwarenessCommandQAT" devLabel="User Change Awareness" translation="用户更改感知"/>
	<label commandName="DrawingSwitchConfigDrawing" devLabel="Drawing" translation="工程图"/>
	<label commandName="DrawingSwitchConfigScope" devLabel="Scope" translation="范围"/>
	<label commandName="DrawingSwitchConfigViewSet" devLabel="View Set" translation="视图集"/>
	<label commandName="DrawingTemplateFileName" devLabel="Template" translation="模板"/>
	<label commandName="DrawingTemplateSaveAsFileFilters" devLabel="Drawing (*.f2d);;Drawing Template (*.f2t)" translation="工程图(*.f2d);;工程图模板(*.f2t)"/>
	<label commandName="DrawingVerticalLinearDimTypeInput" devLabel="Vertical" translation="竖直"/>
	<label commandName="DrawingsDocTitle" devLabel="Drawing" translation="工程图"/>
	<label commandName="DrawingsPropertyRefreshCmd" devLabel="Refresh Properties" translation="刷新特性"/>
	<label commandName="Drawn" devLabel="Drawn" translation="已绘制"/>
	<label commandName="DrawnDate" devLabel="" translation=""/>
	<label commandName="DuplicateSketchSymbol" devLabel="Duplicate" translation="复制"/>
	<label commandName="DwgNo" devLabel="DWG No." translation="工程图编号"/>
	<label commandName="ECADLayerStackDiagramCmdDialogTitle" devLabel="Layer Stack View" translation="层叠视图"/>
	<label commandName="ECADLayerStackViewCmd" devLabel="Layer Stack View" translation="层叠视图"/>
	<label commandName="ECADNewDrawingDocumentToolTip" devLabel="Creates a drawing of electronics design. &#xA;&#xA;Place a view of the PCB. Place a diagram and table for the PCB layer stack." translation="创建电子器件设计的工程图。&#xA;&#xA;放置 PCB 的视图。放置 PCB 层叠的图表和表格。"/>
	<label commandName="ECADNewDrawingDocumentUnavailableToolTip" devLabel="Unavailable when there is no PCB linked to electronics design.&#xA;&#xA;Creates a drawing of electronics design. Place a view of the PCB. Place a diagram and table for the PCB layer stack." translation="当没有链接到电子器件设计的 PCB 时不可用。&#xA;&#xA;创建电子器件设计的工程图。放置 PCB 的视图。放置 PCB 层叠的图表和表格。"/>
	<label commandName="ECADNewDrawingFromPCB3d" devLabel="From Design" translation="从设计"/>
	<label commandName="EDIT_DISPLAY_OPTIONS_GROUP" devLabel="Options" translation="选项"/>
	<label commandName="EDIT_PROPERTIES_GROUP" devLabel="Properties" translation="特性"/>
	<label commandName="EDIT_TOGGLE_BORDER_CMD" devLabel="Show Border" translation="显示边框"/>
	<label commandName="EDIT_TOGGLE_GRID_CMD" devLabel="Show Layout Grid" translation="显示布局栅格"/>
	<label commandName="EDIT_TOGGLE_OTHERGEOMETRY_CMD" devLabel="Show Sheet Contents" translation="显示图纸内容"/>
	<label commandName="EDIT_TOGGLE_SHEET_CMD" devLabel="Show Sheet" translation="显示图纸"/>
	<label commandName="EDIT_TOGGLE_SNAP_CMD" devLabel="Snap to Grid" translation="捕捉到栅格"/>
	<label commandName="EDIT_TOOL_OPTIONS_GROUP" devLabel="Options" translation="选项"/>
	<label commandName="EdgeDimGenAlgo" devLabel="Edge Dim Generator Algorithm" translation="边标注生成器算法"/>
	<label commandName="EdgeExtensionColorButton" devLabel="Select Color" translation="选择颜色"/>
	<label commandName="EdgeExtensionColorInput" devLabel="Color" translation="颜色"/>
	<label commandName="EdgeMajoritySymbolInput" devLabel="Edge" translation="边"/>
	<label commandName="EdgeReset" devLabel="Reset" translation="重置"/>
	<label commandName="EdgeResetDesc" devLabel="Reset all properties to default values" translation="将所有特性重置为默认值"/>
	<label commandName="EdgeVisibilityGroup" devLabel="Edge Visibility" translation="边可见性"/>
	<label commandName="EditPalette" devLabel="Edit Palette" translation="编辑选项板"/>
	<label commandName="EditPaletteColor" devLabel="Edit Palette Color" translation="编辑选项板颜色"/>
	<label commandName="EditPaletteLinetype" devLabel="Edit Palette Linetype" translation="编辑选项板线型"/>
	<label commandName="EditPaletteLineweight" devLabel="Edit Palette Lineweight" translation="编辑选项板线宽"/>
	<label commandName="EditSketchSymbol" devLabel="Edit" translation="编辑"/>
	<label commandName="EditToolPropertySetCustom" devLabel="Custom" translation="自定义"/>
	<label commandName="EditToolPropertySetDynamic" devLabel="Dynamic" translation="动态"/>
	<label commandName="EditToolPropertySetVaries" devLabel="*VARIES*" translation="*变化*"/>
	<label commandName="EditToolProps" devLabel="Edit Tool" translation="编辑工具"/>
	<label commandName="ElectronicsTableCommandDialogTitle" devLabel="Insert Layer Stack Table" translation="插入层叠表"/>
	<label commandName="ElectronicsTableNewDescription1" devLabel="Layer Stack Table is not available when there is no linked Electronics Design." translation="当没有链接的电子器件设计时，层叠表不可用。"/>
	<label commandName="ElectronicsTableNewDescription2" devLabel="To use electronics data in a drawing, first link the 3D PCB to an Electronics Design, then create a drawing." translation="若要在工程图中使用电子器件数据，请先将三维 PCB 链接到电子器件设计，然后再创建工程图。"/>
	<label commandName="ElectronicsTableSuffix" devLabel=" (unavailable)" translation=" (不可用)"/>
	<label commandName="EmptyLeaderTip" devLabel="Creates a leader regardless of any feature data stored within the selected edge." translation="创建引线，无论选定边内存储了什么特征数据。"/>
	<label commandName="EmptyTableTip" devLabel="Creates an empty table." translation="创建空表。"/>
	<label commandName="EnableBrokenView" devLabel="Enable" translation="启用"/>
	<label commandName="EnableInterviewDatums" devLabel="Enable Interview datums" translation="启用视图间基准"/>
	<label commandName="Engineering" devLabel="Engineering" translation="工程"/>
	<label commandName="EraseSelectionInput" devLabel="Selection" translation="选择"/>
	<label commandName="ExistingDimGeneratorAlgorithm" devLabel="Existing Dimension Generator Algorithm" translation="现有标注生成器算法"/>
	<label commandName="Export CSV Restricted Message" devLabel="Export to CSV and other file types so that you can easily share and collaborate on your designs." translation="导出为 CSV 和其他文件类型，以便您可以轻松共享和协作处理设计。"/>
	<label commandName="Export CSV Restricted Title" devLabel="Export CSV" translation="导出 CSV"/>
	<label commandName="Export DWG Restricted Message" devLabel="Export to DWG and other file types so that you can easily share and collaborate on your designs." translation="导出为 DWG 和其他文件类型，以便您可以轻松共享和协作处理设计。"/>
	<label commandName="Export DWG Restricted Title" devLabel="Export DWG" translation="导出 DWG"/>
	<label commandName="Export DXF Restricted Message" devLabel="Export to DXF and other file types so that you can easily share and collaborate on your designs." translation="导出为 DXF 和其他文件类型，以便您可以轻松共享和协作处理设计。"/>
	<label commandName="Export DXF Restricted Title" devLabel="Export DXF" translation="导出 DXF"/>
	<label commandName="Export PDF Restricted Message" devLabel="Export to PDF and other file types so that you can easily share and collaborate on your designs." translation="导出为 PDF 和其他文件类型，以便您可以轻松共享和协作处理设计。"/>
	<label commandName="Export PDF Restricted Title" devLabel="Export PDF" translation="导出 PDF"/>
	<label commandName="ExportCmdFileExistAndIsNotWritable" devLabel="The file cannot be replaced because it is in use." translation="由于该文件正在使用中，因此无法替换。"/>
	<label commandName="ExportPDFFilter" devLabel="PDF Files (*.pdf)" translation="PDF 文件(*.pdf)"/>
	<label commandName="ExportPartsListFilter" devLabel="CSV file(*.csv)" translation="CSV 文件(*.csv)"/>
	<label commandName="Extent" devLabel="Extent Type" translation="范围类型"/>
	<label commandName="ExternalFilePath" devLabel="File Path" translation="文件路径"/>
	<label commandName="FCFReset" devLabel="Reset" translation="重置"/>
	<label commandName="FCFResetDesc" devLabel="Reset all properties to default values" translation="将所有特性重置为默认值"/>
	<label commandName="FDWGGcCoincidentCommandDesc" devLabel="Coincident" translation="重合"/>
	<label commandName="FDWGGcCollinearCommandDesc" devLabel="Collinear" translation="共线"/>
	<label commandName="FDWGGcConcentricCommandDesc" devLabel="Concentric" translation="同心"/>
	<label commandName="FDWGGcEqualCommandDesc" devLabel="Equal" translation="相等"/>
	<label commandName="FDWGGcFixCommandDesc" devLabel="Fix" translation="固定"/>
	<label commandName="FDWGGcHorizontalCommandDesc" devLabel="Horizontal" translation="水平"/>
	<label commandName="FDWGGcHorizontalVerticalCommandDesc" devLabel="Horizontal/Vertical" translation="水平/垂直"/>
	<label commandName="FDWGGcParallelCommandDesc" devLabel="Parallel" translation="平行"/>
	<label commandName="FDWGGcPerpendicularCommandDesc" devLabel="Perpendicular" translation="垂直"/>
	<label commandName="FDWGGcSmoothCommandDesc" devLabel="Smooth" translation="平滑"/>
	<label commandName="FDWGGcSymmetricCommandDesc" devLabel="Symmetric" translation="对称"/>
	<label commandName="FDWGGcTangentCommandDesc" devLabel="Tangent" translation="相切"/>
	<label commandName="FDWGGcVerticalCommandDesc" devLabel="Vertical" translation="竖直"/>
	<label commandName="FDWGSketchSmartConstarintDimCommand" devLabel="Sketch Dimension" translation="草图尺寸"/>
	<label commandName="FD_APPROVED_BY" devLabel="Approved by" translation="批准者"/>
	<label commandName="FD_APPROVED_DATE" devLabel="Date Approved" translation="批准日期"/>
	<label commandName="FD_CHECKED_BY" devLabel="Checked by" translation="检查者"/>
	<label commandName="FD_CHECKED_DATE" devLabel="Date checked" translation="检查日期"/>
	<label commandName="FD_CODE" devLabel="Code compliance" translation="规范合规性"/>
	<label commandName="FD_CREATED_DATE" devLabel="Date created" translation="创建日期"/>
	<label commandName="FD_CREATE_BY" devLabel="Created by" translation="创建者"/>
	<label commandName="FD_DATE_OF_ISSUE" devLabel="Date of issue" translation="发布日期"/>
	<label commandName="FD_DEPT" devLabel="Department" translation="部门"/>
	<label commandName="FD_DOCUMENT_STATUS" devLabel="Document Status" translation="文档状态"/>
	<label commandName="FD_DOCUMENT_TYPE" devLabel="Document Type" translation="文档类型"/>
	<label commandName="FD_DRAWING_NUMBER" devLabel="Drawing number" translation="工程图编号"/>
	<label commandName="FD_DRAWN_BY" devLabel="Drawn by" translation="绘图员"/>
	<label commandName="FD_DRAWN_DATE" devLabel="Date drawn" translation="绘图日期"/>
	<label commandName="FD_DWG_NO" devLabel="Drawing number" translation="工程图编号"/>
	<label commandName="FD_PROJECT" devLabel="Project name" translation="项目名称"/>
	<label commandName="FD_REV" devLabel="Revision number" translation="修订号"/>
	<label commandName="FD_SCALE" devLabel="Drawing scale" translation="图形比例"/>
	<label commandName="FD_SHEET" devLabel="Sheet number" translation="图纸编号"/>
	<label commandName="FD_SIZE" devLabel="Paper size" translation="图纸尺寸"/>
	<label commandName="FD_TECHNICAL_REFERENCE" devLabel="Technical reference" translation="技术参考"/>
	<label commandName="FD_TITLE_1" devLabel="Title one" translation="标题一"/>
	<label commandName="FD_TITLE_2" devLabel="Title two" translation="标题二"/>
	<label commandName="FD_TITLE_3" devLabel="Title three" translation="标题三"/>
	<label commandName="FD_WEIGHT" devLabel="Weight" translation="重量"/>
	<label commandName="FETCHLATESTPROP" devLabel="Fetching latest properties... " translation="正在获取最新特性..."/>
	<label commandName="FUSIONDOCBALLOONNOVIEWMSG" devLabel="This sheet has no drawing views. To add balloons, first add a base view." translation="此图纸不包含工程视图。若要添加引出序号，请首先添加基础视图。"/>
	<label commandName="FUSIONDOCBALLOONNOVIEWTOOLTIP" devLabel="This sheet has no drawing views." translation="此图纸不包含工程视图。"/>
	<label commandName="FUSIONDOCNOBALLOONORBENDIDTOOLTIP" devLabel="This sheet has no balloons or bend identifiers." translation="此图纸没有引出序号或折弯标识符。"/>
	<label commandName="FUSIONDOCNOBALLOONTOOLTIP" devLabel="This sheet has no balloons." translation="此图纸不包含引出序号。"/>
	<label commandName="FUSIONDOCPRINTERROR" devLabel=" did not print due to an unknown error." translation=" 未打印，因为发生了未知错误。"/>
	<label commandName="FUSIONDOCPRINTSHEETS" devLabel="&#xA;Sheet " translation="&#xA;图纸 "/>
	<label commandName="FUSIONDOCPRINTSTATUS" devLabel="Sent to Printer" translation="发送至打印机"/>
	<label commandName="FUSIONDOCSENTTOPRINTER" devLabel=" sheets successfully sent to printer." translation=" 张图纸已成功发送至打印机。"/>
	<label commandName="FUSIONDOCTABLERANGEMISMATCHTOOLTIP" devLabel="The copied cells cannot be pasted in specified target range." translation="无法将复制的单元粘贴到指定目标范围。"/>
	<label commandName="FUSIONDOC_SKETCH_ALREADY_CONSTRAINED" devLabel="Constraint has already been applied to the selected sketch object." translation="约束已应用于选定的草图对象。"/>
	<label commandName="FUSIONDOC_SKETCH_CANNOT_ROTATE" devLabel="One or more objects has constraints that prevent geometry to be rotated." translation="一个或多个对象具有阻止几何图元旋转的约束。"/>
	<label commandName="FUSIONDOC_SKETCH_DIM_OVER_CONSTRAINED" devLabel="Sketch geometry is over constrained." translation="草图几何图元被过度约束。"/>
	<label commandName="FUSIONDOC_SKETCH_DIM_RELAX_DRAGGING" devLabel="A dimensional constraint or user variable with an expression has been set to a numerical value." translation="包含表达式的尺寸约束或用户变量已设为数值。"/>
	<label commandName="FUSIONDOC_SKETCH_INCONSISTENT" devLabel="Dimensional value or resultant geometry is inconsistent with existing configuration." translation="尺寸值或生成的几何图元与现有配置不一致。"/>
	<label commandName="FUSIONDOC_SKETCH_OVER_CONSTRAINED" devLabel="Sketch geometry is over constrained." translation="草图几何图元被过度约束。"/>
	<label commandName="FailToOpenElectronicsDesign" devLabel="Cannot open the associated electronics design." translation="无法打开关联的电子器件设计。"/>
	<label commandName="FailToOpenElectronicsDesignDetail" devLabel="Cannot open the associated electronics design. Open the design manually to create a drawing." translation="无法打开关联的电子器件设计。手动打开设计以创建工程图。"/>
	<label commandName="FeatureGroups" devLabel="Group" translation="组"/>
	<label commandName="FieldWeld" devLabel="Field Weld" translation="现场焊接"/>
	<label commandName="FileCreateDrawingFromPreviousVersion" devLabel="The file you are trying to create drawing from is currently being saved by another user. Do you want to create it from a previous version instead?&#xA;&#xA;" translation="其他用户当前正在保存您尝试从其创建工程图的文件。是否要改为从早期版本创建工程图？&#xA;&#xA;"/>
	<label commandName="FileCreateDrawingFromPreviousVersion_ccy" devLabel="The component you are trying to create a drawing from is currently being saved by someone else. Do you want to create it from a previous change instead?&#xA;&#xA;" translation="您尝试从其创建工程图的零部件当前正由其他人保存。是否要改为从先前的更改创建工程图？&#xA;&#xA;"/>
	<label commandName="FinishEdit" devLabel="Finish Title Block" translation="完成标题栏"/>
	<label commandName="FirstFrame" devLabel="First Frame" translation="第一帧"/>
	<label commandName="FirstLevel" devLabel="First Level" translation="第一级别"/>
	<label commandName="FirstLevelTip" devLabel="Creates a parts list containing only the first level components." translation="创建仅包含第一级零部件的明细表。"/>
	<label commandName="FirstLevelTypeToolTip" devLabel="Swich to First Level partslist." translation="切换到第一级明细表。"/>
	<label commandName="FlatPatternRepresentation" devLabel="Flat Pattern" translation="展开模式"/>
	<label commandName="Flip" devLabel="Flip" translation="反向"/>
	<label commandName="FlipSide" devLabel="Flip Side" translation="反转到对侧"/>
	<label commandName="FlipSymbol" devLabel="Flip Symbol" translation="反向符号"/>
	<label commandName="FocalLength" devLabel="Focal Length" translation="焦距"/>
	<label commandName="FocalLengthToolTip" devLabel="Choose the focal length to apply to the perspective view." translation="选择要应用于透视图的焦距。"/>
	<label commandName="FoldedComponentReprensentation" devLabel="Folded Component" translation="折叠零部件"/>
	<label commandName="ForceNestISO" devLabel="Force Nest Isometric -1Dont 0UL 1UR 2LL 3LR 4UC 5LC 6MC" translation="强制嵌套等轴测 -1Dont 0UL 1UR 2LL 3LR 4UC 5LC 6MC"/>
	<label commandName="Fractional" devLabel="Fractional" translation="分数"/>
	<label commandName="From DWG File" devLabel="From DWG File" translation="从 DWG 文件"/>
	<label commandName="From Existing" devLabel="From Existing" translation="从现有对象"/>
	<label commandName="From Scratch" devLabel="From Scratch" translation="从头开始"/>
	<label commandName="FromParent" devLabel="From Parent" translation="从父项继承"/>
	<label commandName="FromScratchBaseDocument" devLabel="From scratch" translation="从头开始"/>
	<label commandName="Front" devLabel="Front" translation="前"/>
	<label commandName="Full Length" devLabel="Full Length" translation="全长"/>
	<label commandName="FullArc" devLabel="Full Arc Dimension" translation="整圆标注"/>
	<label commandName="FusDocAutoBreak" devLabel="Auto Break" translation="自动打断"/>
	<label commandName="FusDocAutoDimension" devLabel="Auto Dimension" translation="自动标注"/>
	<label commandName="FusDocAutoPrefSave" devLabel=" Automation Preferences saved as " translation=" 自动化首选项另存为"/>
	<label commandName="FusDocAutoRotate" devLabel="Auto Rotate" translation="自动旋转"/>
	<label commandName="FusDocAutomaticDimension" devLabel="Automatic Dimension" translation="自动标注"/>
	<label commandName="FusDocBaselineDimension" devLabel="Baseline Dimension" translation="基线标注"/>
	<label commandName="FusDocBlockRefEditFinishProperties" devLabel="Finish Properties" translation="完成特性"/>
	<label commandName="FusDocBodiesForAutoRotate" devLabel="Maximum Number Of Bodies For Auto Rotate" translation="自动旋转的最大实体数"/>
	<label commandName="FusDocChainDimension" devLabel="Chain Dimension" translation="链标注"/>
	<label commandName="FusDocCircularPatternDimensions" devLabel="Circular Pattern Dimensions" translation="环形阵列尺寸"/>
	<label commandName="FusDocColumnHeader" devLabel="Column" translation="列"/>
	<label commandName="FusDocComponentNamesToExclude" devLabel="Omit Components with Keywords" translation="使用关键字忽略零部件"/>
	<label commandName="FusDocComponentNamesToExcludeDesc" devLabel="Lets you type any components for which you don't want a sheet to be created." translation="使您可以键入您不希望为其创建图纸的任何零部件。"/>
	<label commandName="FusDocCustomLineWidth1" devLabel="0.00mm" translation="0.00mm"/>
	<label commandName="FusDocCustomLineWidth10" devLabel="0.35mm" translation="0.35mm"/>
	<label commandName="FusDocCustomLineWidth11" devLabel="0.40mm" translation="0.40mm"/>
	<label commandName="FusDocCustomLineWidth12" devLabel="0.50mm" translation="0.50mm"/>
	<label commandName="FusDocCustomLineWidth13" devLabel="0.53mm" translation="0.53mm"/>
	<label commandName="FusDocCustomLineWidth14" devLabel="0.60mm" translation="0.60mm"/>
	<label commandName="FusDocCustomLineWidth15" devLabel="0.70mm" translation="0.70mm"/>
	<label commandName="FusDocCustomLineWidth16" devLabel="0.80mm" translation="0.80mm"/>
	<label commandName="FusDocCustomLineWidth17" devLabel="0.90mm" translation="0.90mm"/>
	<label commandName="FusDocCustomLineWidth18" devLabel="1.00mm" translation="1.00mm"/>
	<label commandName="FusDocCustomLineWidth19" devLabel="1.06mm" translation="1.06mm"/>
	<label commandName="FusDocCustomLineWidth2" devLabel="0.05mm" translation="0.05mm"/>
	<label commandName="FusDocCustomLineWidth20" devLabel="1.20mm" translation="1.20mm"/>
	<label commandName="FusDocCustomLineWidth21" devLabel="1.40mm" translation="1.40mm"/>
	<label commandName="FusDocCustomLineWidth22" devLabel="1.58mm" translation="1.58mm"/>
	<label commandName="FusDocCustomLineWidth23" devLabel="2.00mm" translation="2.00mm"/>
	<label commandName="FusDocCustomLineWidth24" devLabel="2.11mm" translation="2.11mm"/>
	<label commandName="FusDocCustomLineWidth3" devLabel="0.09mm" translation="0.09mm"/>
	<label commandName="FusDocCustomLineWidth4" devLabel="0.13mm" translation="0.13mm"/>
	<label commandName="FusDocCustomLineWidth5" devLabel="0.15mm" translation="0.15mm"/>
	<label commandName="FusDocCustomLineWidth6" devLabel="0.18mm" translation="0.18mm"/>
	<label commandName="FusDocCustomLineWidth7" devLabel="0.20mm" translation="0.20mm"/>
	<label commandName="FusDocCustomLineWidth8" devLabel="0.25mm" translation="0.25mm"/>
	<label commandName="FusDocCustomLineWidth9" devLabel="0.30mm" translation="0.30mm"/>
	<label commandName="FusDocDefaultSheetSizeValue0" devLabel="A0 (1189mm x 841mm)" translation="A0 (1189 毫米 x 84 毫米)"/>
	<label commandName="FusDocDefaultSheetSizeValue1" devLabel="A1 (841mm x 594mm)" translation="A1 (841 毫米 x 594 毫米)"/>
	<label commandName="FusDocDefaultSheetSizeValue10" devLabel="D (34in x 22in)" translation="D (34 英寸 x 22 英寸)"/>
	<label commandName="FusDocDefaultSheetSizeValue11" devLabel="E (44in x 34in)" translation="E (44 英寸 x 34 英寸)"/>
	<label commandName="FusDocDefaultSheetSizeValue2" devLabel="A2 (594mm x 420mm)" translation="A2 (594 毫米 x 420 毫米)"/>
	<label commandName="FusDocDefaultSheetSizeValue3" devLabel="A3 (420mm x 297mm)" translation="A3 (420 毫米 x 297 毫米)"/>
	<label commandName="FusDocDefaultSheetSizeValue4" devLabel="A4 (210mm x 297mm)" translation="A4 (210 毫米 x 297 毫米)"/>
	<label commandName="FusDocDefaultSheetSizeValue5" devLabel="A4 (297mm x 210mm)" translation="A4 (297 毫米 x 210 毫米)"/>
	<label commandName="FusDocDefaultSheetSizeValue6" devLabel="A (8.5in x 11in)" translation="A (8.5 英寸 x 11 英寸)"/>
	<label commandName="FusDocDefaultSheetSizeValue7" devLabel="A (11in x 8.5in)" translation="A (11 英寸 x 8.5 英寸)"/>
	<label commandName="FusDocDefaultSheetSizeValue8" devLabel="B (17in x 11in)" translation="B (17 英寸 x 11 英寸)"/>
	<label commandName="FusDocDefaultSheetSizeValue9" devLabel="C (22in x 17in)" translation="C (22 英寸 x 17 英寸)"/>
	<label commandName="FusDocDimensionDirection1" devLabel="Bottom left" translation="左下"/>
	<label commandName="FusDocDimensionDirection2" devLabel="Bottom right" translation="右下"/>
	<label commandName="FusDocDimensionDirection3" devLabel="Top left" translation="左上"/>
	<label commandName="FusDocDimensionDirection4" devLabel="Top right" translation="右上"/>
	<label commandName="FusDocDimensionHDirection" devLabel="Dimension Datum" translation="标注基准"/>
	<label commandName="FusDocDimensionStrategy" devLabel="Dimension Strategy" translation="标注策略"/>
	<label commandName="FusDocDrawingGenerationMessage" devLabel="Generation of %1% started at %2%. This may take several minutes. We will notify you when it is complete." translation="从 %2% 开始生成 %1%。这可能需要几分钟时间。完成后，我们会通知您。"/>
	<label commandName="FusDocDrawingGenerationStarted" devLabel="Generation started" translation="生成已开始"/>
	<label commandName="FusDocFacesForAutoRotate" devLabel="Maximum Number Of Faces For Auto Rotate" translation="自动旋转的最大面数"/>
	<label commandName="FusDocFailedToDownload" devLabel="Failed to download selected template file" translation="未能下载选定的模板文件"/>
	<label commandName="FusDocFailedToPushAutoSettings" devLabel="Failed to push automation settings to template" translation="未能将自动化设置推送到模板"/>
	<label commandName="FusDocGetAlternateDim" devLabel="Get Alternate Dimension" translation="获取替代标注"/>
	<label commandName="FusDocGetAutoDimInfo" devLabel="Get Auto Dimension Info" translation="获取自动标注信息"/>
	<label commandName="FusDocHighlightDimensionset" devLabel="Highlight Dimensionset" translation="亮显标注集"/>
	<label commandName="FusDocInterLoopDimensionStrategy" devLabel="Inter Loop Dimension Strategy" translation="回路间标注策略"/>
	<label commandName="FusDocLinearDimensionPrecision0" devLabel="0" translation="0"/>
	<label commandName="FusDocLinearDimensionPrecision1" devLabel="0.1" translation="0.1"/>
	<label commandName="FusDocLinearDimensionPrecision10" devLabel="1" translation="1"/>
	<label commandName="FusDocLinearDimensionPrecision11" devLabel="1/2" translation="1/2"/>
	<label commandName="FusDocLinearDimensionPrecision12" devLabel="1/4" translation="1/4"/>
	<label commandName="FusDocLinearDimensionPrecision13" devLabel="1/8" translation="1/8"/>
	<label commandName="FusDocLinearDimensionPrecision14" devLabel="1/16" translation="1/16"/>
	<label commandName="FusDocLinearDimensionPrecision15" devLabel="1/32" translation="1/32"/>
	<label commandName="FusDocLinearDimensionPrecision16" devLabel="1/64" translation="1/64"/>
	<label commandName="FusDocLinearDimensionPrecision17" devLabel="1/128" translation="1/128"/>
	<label commandName="FusDocLinearDimensionPrecision18" devLabel="1/256" translation="1/256"/>
	<label commandName="FusDocLinearDimensionPrecision19" devLabel="0'-0&quot;" translation="0'-0&quot;"/>
	<label commandName="FusDocLinearDimensionPrecision2" devLabel="0.12" translation="0.12"/>
	<label commandName="FusDocLinearDimensionPrecision20" devLabel="0'-0.1&quot;" translation="0'-0.1&quot;"/>
	<label commandName="FusDocLinearDimensionPrecision21" devLabel="0'-0.12&quot;" translation="0'-0.12&quot;"/>
	<label commandName="FusDocLinearDimensionPrecision22" devLabel="0'-0.123&quot;" translation="0'-0.123&quot;"/>
	<label commandName="FusDocLinearDimensionPrecision23" devLabel="0'-0.1234&quot;" translation="0'-0.1234&quot;"/>
	<label commandName="FusDocLinearDimensionPrecision24" devLabel="0'-0.12345&quot;" translation="0'-0.12345&quot;"/>
	<label commandName="FusDocLinearDimensionPrecision25" devLabel="0'-0.123456&quot;" translation="0'-0.123456&quot;"/>
	<label commandName="FusDocLinearDimensionPrecision26" devLabel="0'-0.1234567&quot;" translation="0'-0.1234567&quot;"/>
	<label commandName="FusDocLinearDimensionPrecision27" devLabel="0'-0.12345678&quot;" translation="0'-0.12345678&quot;"/>
	<label commandName="FusDocLinearDimensionPrecision28" devLabel="0'-0&quot;" translation="0'-0&quot;"/>
	<label commandName="FusDocLinearDimensionPrecision29" devLabel="0'-0 1/2&quot;" translation="0'-0 1/2&quot;"/>
	<label commandName="FusDocLinearDimensionPrecision3" devLabel="0.123" translation="0.123"/>
	<label commandName="FusDocLinearDimensionPrecision30" devLabel="0'-0 1/4&quot;" translation="0'-0 1/4&quot;"/>
	<label commandName="FusDocLinearDimensionPrecision31" devLabel="0'-0 1/8&quot;" translation="0'-0 1/8&quot;"/>
	<label commandName="FusDocLinearDimensionPrecision32" devLabel="0'-0 1/16&quot;" translation="0'-0 1/16&quot;"/>
	<label commandName="FusDocLinearDimensionPrecision33" devLabel="0'-0 1/32&quot;" translation="0'-0 1/32&quot;"/>
	<label commandName="FusDocLinearDimensionPrecision34" devLabel="0'-0 1/64&quot;" translation="0'-0 1/64&quot;"/>
	<label commandName="FusDocLinearDimensionPrecision35" devLabel="0'-0 1/128&quot;" translation="0'-0 1/128&quot;"/>
	<label commandName="FusDocLinearDimensionPrecision36" devLabel="0'-0 1/256&quot;" translation="0'-0 1/256&quot;"/>
	<label commandName="FusDocLinearDimensionPrecision4" devLabel="0.1234" translation="0.1234"/>
	<label commandName="FusDocLinearDimensionPrecision5" devLabel="0.12345" translation="0.12345"/>
	<label commandName="FusDocLinearDimensionPrecision6" devLabel="0.123456" translation="0.123456"/>
	<label commandName="FusDocLinearDimensionPrecision7" devLabel="0.1234567" translation="0.1234567"/>
	<label commandName="FusDocLinearDimensionPrecision8" devLabel="0.12345678" translation="0.12345678"/>
	<label commandName="FusDocMinimumIndividualBreakPercentage" devLabel="Minimum Individual Break Percentage" translation="最小单个打断百分比"/>
	<label commandName="FusDocMinimumTotalBreakPercentage" devLabel="Minimum Total Break Percentage" translation="最小总打断百分比"/>
	<label commandName="FusDocOpenDrawing" devLabel="Open drawing" translation="打开工程图"/>
	<label commandName="FusDocOrdinateDimension" devLabel="Ordinate Dimension" translation="坐标标注"/>
	<label commandName="FusDocOverallDimension" devLabel="Overall Dimension" translation="整体标注"/>
	<label commandName="FusDocPreferHnTNoteOverDims" devLabel="Prefer hole and thread note over dimensions" translation="喜欢孔和螺纹注释胜过标注"/>
	<label commandName="FusDocPreferSymmetricDims" devLabel="Prefer Symmetric Dims for Symmertic Part" translation="对称零件首选对称标注"/>
	<label commandName="FusDocPreferredSheetSize" devLabel="Preferred Sheet Sizes" translation="首选图纸尺寸"/>
	<label commandName="FusDocReadyForReview" devLabel=" ready for review" translation="准备好审核"/>
	<label commandName="FusDocSizeHeader" devLabel="Size" translation="尺寸"/>
	<label commandName="FusDocSymmetricDimension" devLabel="Symmetric Dimension" translation="对称标注"/>
	<label commandName="FusDocSymmetricWithBaseLineDimension" devLabel="Symmetric With Baseline Dimension" translation="与基线标注对称"/>
	<label commandName="FusDocSymmetricWithOrdinateDimension" devLabel="Symmetric With Ordinate Dimension" translation="与坐标标注对称"/>
	<label commandName="FusDocTextHeightASME0" devLabel="0.07in" translation="0.07in"/>
	<label commandName="FusDocTextHeightASME1" devLabel="0.1in" translation="0.1in"/>
	<label commandName="FusDocTextHeightASME2" devLabel="0.12in" translation="0.12in"/>
	<label commandName="FusDocTextHeightASME3" devLabel="0.24in" translation="0.24in"/>
	<label commandName="FusDocTextHeightASME4" devLabel="0.35in" translation="0.35in"/>
	<label commandName="FusDocTextHeightASME5" devLabel="0.5in" translation="0.5in"/>
	<label commandName="FusDocTextHeightASME6" devLabel="0.75in" translation="0.75in"/>
	<label commandName="FusDocTextHeightISO0" devLabel="1.8mm" translation="1.8mm"/>
	<label commandName="FusDocTextHeightISO1" devLabel="2.5mm" translation="2.5mm"/>
	<label commandName="FusDocTextHeightISO2" devLabel="3.5mm" translation="3.5mm"/>
	<label commandName="FusDocTextHeightISO3" devLabel="5mm" translation="5mm"/>
	<label commandName="FusDocTextHeightISO4" devLabel="7mm" translation="7mm"/>
	<label commandName="FusDocTextHeightISO5" devLabel="10mm" translation="10mm"/>
	<label commandName="FusDocTextHeightISO6" devLabel="14mm" translation="14mm"/>
	<label commandName="FusDocTextHeightISO7" devLabel="20mm" translation="20mm"/>
	<label commandName="FusDocViewJobStatus" devLabel="View job status" translation="查看作业状态"/>
	<label commandName="FusionAddTitleBlockCommandDialogTitle1" devLabel="NEW TITLE BLOCK" translation="新建标题栏"/>
	<label commandName="FusionBendTableEdit" devLabel="BEND TABLE" translation="折弯表"/>
	<label commandName="FusionBrokenView" devLabel="Break View" translation="打断视图"/>
	<label commandName="FusionBrokenViewEdit" devLabel="Broken View Edit" translation="打断的视图编辑"/>
	<label commandName="FusionChangeBorderVisibilityCommand" devLabel="Show/Hide" translation="显示/隐藏"/>
	<label commandName="FusionChangeDimensionUnitsSettings" devLabel="Change Dimension Units" translation="更改尺寸单位"/>
	<label commandName="FusionChangeDisplayBorderCommand" devLabel="Change Display Border" translation="更改显示边框"/>
	<label commandName="FusionChangeDisplayTitleBlockCommand" devLabel="Change Display Title Block" translation="更改显示标题栏"/>
	<label commandName="FusionChangeDocumentSettings" devLabel="Change Document Settings" translation="更改文档设置"/>
	<label commandName="FusionChangeFontSettings" devLabel="Change Font" translation="更改字体"/>
	<label commandName="FusionChangeLineWidthGroupSettings" devLabel="Change Line Width Group" translation="更改线宽组"/>
	<label commandName="FusionChangeMultiDocSettingCommand" devLabel="Change Document Settings" translation="更改文档设置"/>
	<label commandName="FusionChangeMultiSheetSettingsCommand" devLabel="Change Sheet Settings" translation="更改图纸设置"/>
	<label commandName="FusionChangeRevisionScopeSettings" devLabel="Change Revision Scope" translation="更改修订范围"/>
	<label commandName="FusionChangeSheetSettings" devLabel="Sheet Size" translation="图纸尺寸"/>
	<label commandName="FusionChangeSheetSizeCommand" devLabel="Change Sheet Size" translation="更改图纸尺寸"/>
	<label commandName="FusionChangeTextHeightGroupSettings" devLabel="Change Text Height Group" translation="更改文本高度组"/>
	<label commandName="FusionChangeTitleBlockCommand" devLabel="Change Title Block" translation="更改标题栏"/>
	<label commandName="FusionChangeTitleBlockVisibilityCommand" devLabel="Show/Hide" translation="显示/隐藏"/>
	<label commandName="FusionConfigTableEdit" devLabel="CONFIGURATION TABLE" translation="配置表"/>
	<label commandName="FusionCreateDrawingFromComponents" devLabel="Create Drawing" translation="创建工程图"/>
	<label commandName="FusionCreateFusionDrawingCommand" devLabel="Cannot find downloaded file. Expected filepath: %1%" translation="找不到下载的文件。预期的文件路径: %1%"/>
	<label commandName="FusionCreateFusionDrawingCommandError" devLabel="An unexpected error occurred while downloading and opening a document." translation="下载并打开文档时发生意外错误。"/>
	<label commandName="FusionCropOutlineCommand" devLabel="Show / Hide Crop Outline" translation="显示/隐藏裁剪轮廓"/>
	<label commandName="FusionCropView" devLabel="Crop View" translation="裁剪视图"/>
	<label commandName="FusionCropViewEditCommand" devLabel="Edit Crop View" translation="编辑裁剪视图"/>
	<label commandName="FusionDashboardCreateFusionDrawingCommand" devLabel="Cannot find downloaded file. Expected filepath: %1%" translation="找不到下载的文件。预期的文件路径: %1%"/>
	<label commandName="FusionDashboardCreateFusionDrawingCommandError" devLabel="An unexpected error occurred while downloading and opening a document." translation="下载并打开文档时发生意外错误。"/>
	<label commandName="FusionDimensionDialogAltUnitsDisplatTrailingZeros" devLabel="Trailing Zeros" translation="尾随零"/>
	<label commandName="FusionDimensionDialogAltUnitsDisplayLeadingZeros" devLabel="Leading Zeros" translation="前导零"/>
	<label commandName="FusionDimensionDialogAltUnitsDisplaySuffix" devLabel="Unit Abbreviation" translation="单位缩写"/>
	<label commandName="FusionDimensionDialogAltUnitsZerosAndUnits" devLabel="Zeros/Units" translation="零/单位"/>
	<label commandName="FusionDimensionDialogAlternateLinearFormat" devLabel="Format" translation="格式"/>
	<label commandName="FusionDimensionDialogAlternateLinearPrecision" devLabel="Linear Precision" translation="线性精度"/>
	<label commandName="FusionDimensionDialogAlternateTolLinearPrecision" devLabel="Linear Tolerance Precision" translation="线性公差精度"/>
	<label commandName="FusionDimensionDialogAlternateUnits" devLabel="Alternate Units" translation="换算单位"/>
	<label commandName="FusionDimensionDialogFit" devLabel="Fit" translation="配合"/>
	<label commandName="FusionDimensionDialogFitAndDeviations" devLabel="Tolerance class with deviations" translation="带偏差的公差等级"/>
	<label commandName="FusionDimensionDialogFitAndLimits" devLabel="Tolerance class with limits" translation="带极限的公差等级"/>
	<label commandName="FusionDimensionDialogFitClearance" devLabel="Clearance" translation="间隙"/>
	<label commandName="FusionDimensionDialogFitCustom" devLabel="Custom" translation="自定义"/>
	<label commandName="FusionDimensionDialogFitCustomTip" devLabel="Custom fit" translation="自定义配合"/>
	<label commandName="FusionDimensionDialogFitFormat" devLabel="Show fit" translation="显示配合"/>
	<label commandName="FusionDimensionDialogFitHole" devLabel="Hole" translation="孔"/>
	<label commandName="FusionDimensionDialogFitInterference" devLabel="Interference" translation="过盈"/>
	<label commandName="FusionDimensionDialogFitLabel" devLabel="Limits" translation="极限"/>
	<label commandName="FusionDimensionDialogFitOnly" devLabel="Tolerance class only" translation="仅公差等级"/>
	<label commandName="FusionDimensionDialogFitPreferred" devLabel="Preferred Fit" translation="首选配合"/>
	<label commandName="FusionDimensionDialogFitShaft" devLabel="Shaft" translation="轴"/>
	<label commandName="FusionDimensionDialogFitTarget" devLabel="Hole/Shaft" translation="孔/轴"/>
	<label commandName="FusionDimensionDialogFitTolFormat" devLabel="Show tolerance" translation="显示公差"/>
	<label commandName="FusionDimensionDialogFitTransition" devLabel="Transtion" translation="过渡"/>
	<label commandName="FusionDimensionDialogFitType" devLabel="Type" translation="类型"/>
	<label commandName="FusionDimensionDialogGradeHole" devLabel="Tolerance Hole Grade" translation="孔公差等级"/>
	<label commandName="FusionDimensionDialogGradeShaft" devLabel="Tolerance Shaft Grade" translation="轴公差等级"/>
	<label commandName="FusionDimensionDialogGroupAlternateUnits" devLabel="Alternate Units" translation="换算单位"/>
	<label commandName="FusionDimensionDialogGroupInspection" devLabel="Inspection" translation="检验"/>
	<label commandName="FusionDimensionDialogGroupPrimaryUnits" devLabel="Primary Units" translation="主单位"/>
	<label commandName="FusionDimensionDialogGroupText" devLabel="Text" translation="文本"/>
	<label commandName="FusionDimensionDialogGroupTolerances" devLabel="Tolerances" translation="公差"/>
	<label commandName="FusionDimensionDialogHoleClass" devLabel="Hole Class" translation="孔等级"/>
	<label commandName="FusionDimensionDialogInspectionAngular" devLabel="Angular" translation="角度"/>
	<label commandName="FusionDimensionDialogInspectionFrame" devLabel="Frame" translation="框架"/>
	<label commandName="FusionDimensionDialogInspectionLabel" devLabel="Label" translation="标签"/>
	<label commandName="FusionDimensionDialogInspectionNoFrame" devLabel="No Frame" translation="无框"/>
	<label commandName="FusionDimensionDialogInspectionRate" devLabel="Rate" translation="比率"/>
	<label commandName="FusionDimensionDialogInspectionRound" devLabel="Round" translation="圆形"/>
	<label commandName="FusionDimensionDialogLowerTolerance" devLabel="Lower Tolerance" translation="公差下限"/>
	<label commandName="FusionDimensionDialogNotToScale" devLabel="Not To Scale" translation="不缩放"/>
	<label commandName="FusionDimensionDialogPrimaryAngularPrecision" devLabel="Angular Precision" translation="角度精度"/>
	<label commandName="FusionDimensionDialogPrimaryDisplayLeadingZeroInput" devLabel="Leading Zeros" translation="前导零"/>
	<label commandName="FusionDimensionDialogPrimaryDisplaySuffixInput" devLabel="Unit Abbreviation" translation="单位缩写"/>
	<label commandName="FusionDimensionDialogPrimaryDisplayTrailingZeroInput" devLabel="Trailing Zeros" translation="尾随零"/>
	<label commandName="FusionDimensionDialogPrimaryLinearPrecision" devLabel="Linear Precision" translation="线性精度"/>
	<label commandName="FusionDimensionDialogPrimaryTolLinearPrecision" devLabel="Linear Tolerance Precision" translation="线性公差精度"/>
	<label commandName="FusionDimensionDialogPrimaryUnitFormat" devLabel="Format" translation="格式"/>
	<label commandName="FusionDimensionDialogPrimaryUnits" devLabel="Primary Units" translation="主单位"/>
	<label commandName="FusionDimensionDialogPrimaryUnitsZerosAndUnits" devLabel="Zeros/Units" translation="零/单位"/>
	<label commandName="FusionDimensionDialogReferenceDimension" devLabel="Reference Dimension" translation="参考标注"/>
	<label commandName="FusionDimensionDialogRepresentation" devLabel="Representation" translation="表达"/>
	<label commandName="FusionDimensionDialogShaftClass" devLabel="Shaft Class" translation="轴等级"/>
	<label commandName="FusionDimensionDialogSymbolPalette" devLabel="Insert Symbol" translation="插入符号"/>
	<label commandName="FusionDimensionDialogTheoreticallyExact" devLabel="Theoretically Exact" translation="理论上精确"/>
	<label commandName="FusionDimensionDialogTolDiv" devLabel="/" translation="/"/>
	<label commandName="FusionDimensionDialogTolerance" devLabel="Tolerance" translation="公差"/>
	<label commandName="FusionDimensionDialogToleranceDeviation" devLabel="Deviation" translation="偏差"/>
	<label commandName="FusionDimensionDialogToleranceLimit" devLabel="Limit" translation="限制"/>
	<label commandName="FusionDimensionDialogToleranceSymmetrical" devLabel="Symmetrical" translation="对称"/>
	<label commandName="FusionDimensionDialogToleranceType" devLabel="Type" translation="类型"/>
	<label commandName="FusionDimensionDialogUpperTolerance" devLabel="Upper Tolerance" translation="公差上限"/>
	<label commandName="FusionDimensionDialoganceFitClass" devLabel="Tolarance class" translation="公差等级"/>
	<label commandName="FusionDimensionDialoganceFitStackLine" devLabel="Fit stack line" translation="带引线配合堆叠"/>
	<label commandName="FusionDimensionDialoganceFitStackLineDiagonal" devLabel="Fit stack diagonal" translation="对角线配合堆叠"/>
	<label commandName="FusionDimensionDialoganceFitStackNoLine" devLabel="Fit stack no line" translation="无引线配合堆叠"/>
	<label commandName="FusionDocAcCoreConsolePathName" devLabel="Path to AcCoreConsole" translation="AcCoreConsole 的路径"/>
	<label commandName="FusionDocAcCoreConsoleToolTip" devLabel="Path to AcCoreConsole" translation="AcCoreConsole 的路径"/>
	<label commandName="FusionDocAddDimensionBreak" devLabel="Add Dimension Break" translation="添加标注折断"/>
	<label commandName="FusionDocAlignedDimension" devLabel="Aligned Dimension" translation="对齐标注"/>
	<label commandName="FusionDocAngularDimension" devLabel="Angular Dimension" translation="角度标注"/>
	<label commandName="FusionDocArc" devLabel="3-Point Arc" translation="三点圆弧"/>
	<label commandName="FusionDocArcCenter" devLabel="ArcCenter" translation="圆弧圆心"/>
	<label commandName="FusionDocArcDimension" devLabel="Arc Length Dimension" translation="弧长标注"/>
	<label commandName="FusionDocArcTangent" devLabel="ArcTangent" translation="圆弧切线"/>
	<label commandName="FusionDocArrow" devLabel="Leader" translation="引线"/>
	<label commandName="FusionDocAttDef" devLabel="Attribute" translation="属性"/>
	<label commandName="FusionDocAttEdit" devLabel="Attribute Definition Edit" translation="属性定义编辑"/>
	<label commandName="FusionDocAutoCutView" devLabel="Auto Cut View" translation="自动剖切视图"/>
	<label commandName="FusionDocAutoDetailedView" devLabel="Auto Detailed View" translation="自动详细视图"/>
	<label commandName="FusionDocAutoNest" devLabel="Auto Nest" translation="自动嵌套"/>
	<label commandName="FusionDocAutoScale" devLabel="Auto Scale" translation="自动缩放"/>
	<label commandName="FusionDocAutoSectionalView" devLabel="Auto Sectional View" translation="自动剖视图"/>
	<label commandName="FusionDocAutoView" devLabel="Auto View" translation="自动视图"/>
	<label commandName="FusionDocAutoViewMaxBodiesToConsider" devLabel="Max Bodies To Consider for Auto View" translation="自动视图要考虑的最大实体数"/>
	<label commandName="FusionDocAutoViewPercentDiffInViews" devLabel="Percentage Difference In Views" translation="视图中的百分比差异"/>
	<label commandName="FusionDocAutomationSettingsCmd" devLabel="Change Automation Settings" translation="更改自动化设置"/>
	<label commandName="FusionDocAutomationSettingsCmdTooltip" devLabel="Change Automation Settings" translation="更改自动化设置"/>
	<label commandName="FusionDocBalloon" devLabel="Balloon" translation="引出序号"/>
	<label commandName="FusionDocBalloonsBodyNotInComponentTip" devLabel="A balloon can only be placed on a component" translation="只能将引出序号放置在零部件上"/>
	<label commandName="FusionDocBalloonsBodyNotInComponentTip2" devLabel="&lt;b&gt;A balloon can only be placed on a component.&lt;/b&gt;&lt;br/&gt;&lt;br/&gt;Convert bodies to components in the Design." translation="&lt;b&gt;只能将引出序号放置在零部件上。&lt;/b&gt;&lt;br/&gt;&lt;br/&gt;请将实体转换为设计中的零部件。"/>
	<label commandName="FusionDocBalloonsCannotBePutOnSketchTip" devLabel="A balloon cannot be put on sketches" translation="无法在草图上放置引出序号"/>
	<label commandName="FusionDocBalloonsCannotBePutOnSketchTip2" devLabel="&lt;b&gt;A balloon cannot be put on sketches.&lt;/b&gt;" translation="&lt;b&gt;无法在草图上放置引出序号。&lt;/b&gt;"/>
	<label commandName="FusionDocBaselineDimension" devLabel="Baseline Dimension" translation="基线标注"/>
	<label commandName="FusionDocBendNoteLeader" devLabel="Bend Note" translation="折弯注释"/>
	<label commandName="FusionDocBendTable" devLabel="Bend Table" translation="折弯表"/>
	<label commandName="FusionDocBlockEdit" devLabel="Edit Title Block" translation="编辑标题栏"/>
	<label commandName="FusionDocBorderEdit" devLabel="Edit Border" translation="编辑边框"/>
	<label commandName="FusionDocBrokenChainViewUnsupported" devLabel="You cannot create a breakout section on a Break View and its linked views." translation="不能在打断视图及其链接视图上创建局部剖面。"/>
	<label commandName="FusionDocBrokenChainViewUnsupportedTitle" devLabel="Cannot create breakout section" translation="无法创建局部剖面"/>
	<label commandName="FusionDocBrokenViewAuxViewUnsupported" devLabel="Cannot add breaks to an auxiliary view" translation="无法向辅助视图添加折断"/>
	<label commandName="FusionDocBrokenViewBreakoutViewUnsupported" devLabel="You cannot create a Break View on a Breakout Section View and its linked views." translation="不能在局部剖视图及其链接视图上创建打断视图。"/>
	<label commandName="FusionDocBrokenViewCropViewChainUnsupported" devLabel="Cannot add breaks to a view where the parent is a crop view" translation="无法向父项是裁剪视图的视图添加打断视图"/>
	<label commandName="FusionDocBrokenViewCropViewUnsupported" devLabel="Cannot add breaks to a crop view" translation="无法向裁剪视图添加打断视图"/>
	<label commandName="FusionDocCancelDeleteSymbolButton" devLabel="Cancel" translation="取消"/>
	<label commandName="FusionDocCenterEditPattern" devLabel="Center Mark Pattern" translation="中心标记阵列"/>
	<label commandName="FusionDocCenterPattern" devLabel="Center Mark Pattern" translation="中心标记阵列"/>
	<label commandName="FusionDocCenterReassociate" devLabel="Reassociate" translation="重新关联"/>
	<label commandName="FusionDocCenterline" devLabel="Center Line" translation="中心线"/>
	<label commandName="FusionDocCentermark" devLabel="Center Mark" translation="中心标记"/>
	<label commandName="FusionDocChainDimension" devLabel="Chain Dimension" translation="连续标注"/>
	<label commandName="FusionDocCircle" devLabel="Center Radius Circle" translation="圆心半径圆"/>
	<label commandName="FusionDocCircle2Point" devLabel="Circle2Point" translation="圆，两点"/>
	<label commandName="FusionDocCircle3Point" devLabel="Circle3Point" translation="圆，三点"/>
	<label commandName="FusionDocCircleDiameter" devLabel="CircleDiameter" translation="圆，直径"/>
	<label commandName="FusionDocCommaSeparator" devLabel=", " translation="， "/>
	<label commandName="FusionDocContinueEditingExistingBorderBlock" devLabel="The Border contains no geometry or text. Please add some geometry and/or text before finishing the edit.&#xA;If you want to hide the border from a sheet, go to Browser &gt; Sheet Settings &gt; Display Border.&#xA;" translation="边框不包含任何几何图元或文本。请添加几何图元和/或文本，然后再完成编辑。&#xA;如果要从图纸中隐藏边框，请转到“浏览器”&gt;“图纸设置”&gt;“显示边框”。&#xA;"/>
	<label commandName="FusionDocContinueEditingExistingTitleBlock" devLabel="The Title Block contains no geometry or text. Please add some geometry and/or text before finishing the edit.&#xA;If you want to hide the Title Block from a sheet, go to Browser &gt; Sheet Settings &gt; Display Title Block.&#xA;" translation="标题栏不包含任何几何图元或文本。请添加几何图元和/或文本，然后再完成编辑。&#xA;如果要从图纸中隐藏标题栏，请转到“浏览器”&gt;“图纸设置”&gt;“显示标题栏”。&#xA;"/>
	<label commandName="FusionDocCopy" devLabel="Copy" translation="复制"/>
	<label commandName="FusionDocCopyCustomTableCommand" devLabel="Copy" translation="复制"/>
	<label commandName="FusionDocCopyDefaultCommand" devLabel="Copy" translation="复制"/>
	<label commandName="FusionDocCopyGeomEntityCommand" devLabel="Copy" translation="复制"/>
	<label commandName="FusionDocCopyMtextCommand" devLabel="Copy" translation="复制"/>
	<label commandName="FusionDocCopySketchCommand" devLabel="Copy" translation="复制"/>
	<label commandName="FusionDocCreateDrawingFailed" devLabel="Create drawing failed" translation="创建工程图失败"/>
	<label commandName="FusionDocCreateIsometricView" devLabel="Isometric View" translation="等轴测视图"/>
	<label commandName="FusionDocCropBreakViewUnsupportedTitle" devLabel="Cannot crop break views" translation="无法裁剪打断视图"/>
	<label commandName="FusionDocCropDetailViewUnsupportedTitle" devLabel="Cannot crop detail views" translation="无法裁剪局部视图"/>
	<label commandName="FusionDocCropPerspectiveViewUnsupportedTitle" devLabel="Cannot crop perspective views" translation="无法裁剪透视图"/>
	<label commandName="FusionDocCropViewBreakViewUnsupported" devLabel="You cannot crop a Break View." translation="无法裁剪打断视图。"/>
	<label commandName="FusionDocCropViewDetailViewUnsupported" devLabel="You cannot crop a Detail View." translation="无法裁剪局部视图。"/>
	<label commandName="FusionDocCropViewOnCropViewUnsupportedMessage" devLabel="You can crop a view only once.&#xA;&#xA;You can edit the existing crop view by selecting the crop window." translation="一个视图只能裁剪一次。&#xA;&#xA;可以通过选择裁剪窗口来编辑现有裁剪视图。"/>
	<label commandName="FusionDocCropViewOnCropViewUnsupportedTitle" devLabel="View is already cropped" translation="视图已裁剪"/>
	<label commandName="FusionDocCropViewPerspectiveViewUnsupported" devLabel="You cannot crop a Perspective View." translation="无法裁剪透视图。"/>
	<label commandName="FusionDocCropWindowCurveUnsupportedCreation" devLabel="The crop window and the selection boundary of the view must overlap." translation="裁剪窗口和视图的选择边界必须重叠。"/>
	<label commandName="FusionDocCropWindowCurveUnsupportedTitle" devLabel="Cannot crop outside the view" translation="无法在视图外裁剪"/>
	<label commandName="FusionDocCropWindowRedrawProfileBtnText" devLabel="Redraw Crop Window" translation="重画裁剪窗口"/>
	<label commandName="FusionDocCustomLeaderReassociate" devLabel="Reassociate" translation="重新关联"/>
	<label commandName="FusionDocCutDefaultCommand" devLabel="Cut" translation="剪切"/>
	<label commandName="FusionDocCutGeomEntityCommand" devLabel="Cut" translation="剪切"/>
	<label commandName="FusionDocCutMtextCommand" devLabel="Cut" translation="剪切"/>
	<label commandName="FusionDocCutSketchCommand" devLabel="Cut" translation="剪切"/>
	<label commandName="FusionDocDNTWD1" devLabel="Error" translation="错误"/>
	<label commandName="FusionDocDNTWD2" devLabel="This drawing has no drawing views. To add Parts List/Bend Table, first add a base view." translation="此工程图没有工程视图。若要添加明细表/折弯表，请先添加基础视图。"/>
	<label commandName="FusionDocDWGRecoveryDocument" devLabel="The document" translation="文档"/>
	<label commandName="FusionDocDWGRecoveryErrorsFound" devLabel="&lt;b&gt;%1%&lt;/b&gt; has been damaged&lt;br/&gt;&lt;br/&gt;The file has been damaged and may have limited functionality.&lt;br/&gt;&lt;br/&gt;Any corrupt views will be outlined. We suggest deleting and recreating these views. If this does not resolve the issue, we recommend reverting to a previous drawing version by following the steps outlined here:&lt;br/&gt;&lt;br/&gt;&lt;a href=&quot;http://help.autodesk.com/view/NINVFUS/ENU/?guid=GUID-9610E274-6C25-4ED0-809D-35C9068F10BC&quot;&gt;How to Revert to a Previous Version&lt;/a&gt;" translation="&lt;b&gt;%1%&lt;/b&gt; 已损坏&lt;br/&gt;&lt;br/&gt;该文件已损坏，可能仅具有有限的功能。&lt;br/&gt;&lt;br/&gt;系统将略述任何损坏的视图。我们建议您删除并重新创建这些视图。如果这样无法解决问题，我们建议您执行此处略述的步骤恢复到工程图的早期版本:&lt;br/&gt;&lt;br/&gt;&lt;a href=&quot;http://help.autodesk.com/view/NINVFUS/CHS/?guid=GUID-9610E274-6C25-4ED0-809D-35C9068F10BC&quot;&gt;如何恢复到早期版本&lt;/a&gt;"/>
	<label commandName="FusionDocDatumId" devLabel="Datum Identifier" translation="基准标识符号"/>
	<label commandName="FusionDocDatumIdEdgeOption" devLabel="Edge" translation="边"/>
	<label commandName="FusionDocDatumIdSurfaceOption" devLabel="Surface" translation="曲面"/>
	<label commandName="FusionDocDebugOptionsDescription" devLabel="Preferences that used for easy of debugging drawing" translation="用于轻松调试工程图的首选项"/>
	<label commandName="FusionDocDebugOptionsName" devLabel="Drawing Debug" translation="工程图调试"/>
	<label commandName="FusionDocDefaultTitleBlock" devLabel="The default title block cannot be edited. Do you want to add a new title block based on this one?" translation="无法编辑默认标题栏。是否要添加基于此默认标题栏的新标题栏？"/>
	<label commandName="FusionDocDelete" devLabel="Delete" translation="删除"/>
	<label commandName="FusionDocDeleteConstraint" devLabel="Delete Constraint" translation="删除约束"/>
	<label commandName="FusionDocDeleteSymbolButton" devLabel="Delete Symbol" translation="删除符号"/>
	<label commandName="FusionDocDeleteSymbolTitle" devLabel=" All instances will be deleted" translation="将删除所有实例"/>
	<label commandName="FusionDocDeleteSymbolWarning" devLabel="If you delete this &lt;b&gt;Custom Sketch Symbol,&lt;/b&gt; it will permanently remove all instances from the drawing.&#xA;&#xA; Do you want to delete the symbol ?" translation="如果您删除此&lt;b&gt;自定义草图符号&lt;/b&gt;，将从工程图中永久移除所有实例。&#xA;&#xA;是否要删除该符号？"/>
	<label commandName="FusionDocDetailViewCropViewUnsupported" devLabel="Cannot detail a crop view" translation="无法详细显示裁剪视图"/>
	<label commandName="FusionDocDiameterDimension" devLabel="Diameter Dimension" translation="直径标注"/>
	<label commandName="FusionDocDimReassociate" devLabel="Reassociate" translation="重新关联"/>
	<label commandName="FusionDocDimensionBreak" devLabel="Dimension Break" translation="标注折断"/>
	<label commandName="FusionDocDimensionEdit" devLabel="Edit Dimension" translation="编辑标注"/>
	<label commandName="FusionDocDimensionProperties1" devLabel="DIMENSION" translation="尺寸标注"/>
	<label commandName="FusionDocDisassociatedAnnotations" devLabel="One or more sheets contain disassociated annotations. If you continue, your drawings may contain errors." translation="一张或多张图纸包含已解除关联的标注。如果继续，您的工程图可能包含错误。"/>
	<label commandName="FusionDocDocumentNotSet" devLabel="Document name is not properly set." translation="未正确设置文档名称。"/>
	<label commandName="FusionDocEdgeExtension" devLabel="Edge Extension" translation="边延伸"/>
	<label commandName="FusionDocEditSketchSymbolTitle" devLabel="Custom Sketch Symbol cannot be empty" translation="自定义草图符号不能为空"/>
	<label commandName="FusionDocEditSketchSymbolWarning" devLabel="The &lt;b&gt;Custom Sketch Symbol &lt;/b&gt; contains no object. Add a sketch object to finish the sketch.&lt;br&gt;&lt;br&gt;Click the &lt;b&gt;More (three-dot) menu&lt;/b&gt; next to the symbol to delete and manage the symbol." translation="&lt;b&gt;自定义草图符号&lt;/b&gt;不包含任何对象。添加草图对象以完成草图。&lt;br&gt;&lt;br&gt;单击符号旁边的&lt;b&gt;“更多”(三点)菜单&lt;/b&gt;可删除和管理符号。"/>
	<label commandName="FusionDocEgeSymbol" devLabel="Edge Symbol" translation="边界符号"/>
	<label commandName="FusionDocEllipse" devLabel="Ellipse" translation="椭圆"/>
	<label commandName="FusionDocEmptyLeader" devLabel="Leader Note" translation="引线注释"/>
	<label commandName="FusionDocEmptyTable" devLabel="Custom Table" translation="自定义表"/>
	<label commandName="FusionDocEnableDebugAcCoreConsoleName" devLabel="Enable Debug AcCoreConsole" translation="启用调试 AcCoreConsole"/>
	<label commandName="FusionDocEnableDebugAcCoreConsoleToolTip" devLabel="Enable debug AcCoreConsole" translation="启用调试 AcCoreConsole"/>
	<label commandName="FusionDocErase" devLabel="Delete" translation="删除"/>
	<label commandName="FusionDocExtend" devLabel="Extend" translation="延伸"/>
	<label commandName="FusionDocFeatureControlFrame" devLabel="Feature Control Frame" translation="形位公差符号"/>
	<label commandName="FusionDocFitCmd" devLabel="Fit" translation="全部缩放"/>
	<label commandName="FusionDocFitDesc" devLabel="Fit" translation="全部缩放"/>
	<label commandName="FusionDocForcePreferredIsoView" devLabel="Force Preferred Isometric View" translation="强制首选等轴测视图"/>
	<label commandName="FusionDocGcCoincident" devLabel="Coincident" translation="重合"/>
	<label commandName="FusionDocGcCollinear" devLabel="Collinear" translation="共线"/>
	<label commandName="FusionDocGcConcentric" devLabel="Concentric" translation="同心"/>
	<label commandName="FusionDocGcEqual" devLabel="Equal" translation="相等"/>
	<label commandName="FusionDocGcFix" devLabel="Fix" translation="固定"/>
	<label commandName="FusionDocGcHorizontal" devLabel="Horizontal" translation="水平"/>
	<label commandName="FusionDocGcParallel" devLabel="Parallel" translation="平行"/>
	<label commandName="FusionDocGcPerpendicular" devLabel="Perpendicular" translation="垂直"/>
	<label commandName="FusionDocGcSmooth" devLabel="Smooth" translation="平滑"/>
	<label commandName="FusionDocGcSymmetric" devLabel="Symmetric" translation="对称"/>
	<label commandName="FusionDocGcTangent" devLabel="Tangent" translation="相切"/>
	<label commandName="FusionDocGcVertical" devLabel="Vertical" translation="竖直"/>
	<label commandName="FusionDocHasMissingXRefs" devLabel="Fusion Document has missing XRefs" translation="Fusion 文档缺少外部参照"/>
	<label commandName="FusionDocHatchEdit" devLabel="Edit Hatch" translation="编辑图案填充"/>
	<label commandName="FusionDocHatchProperties1" devLabel="HATCH" translation="图案填充"/>
	<label commandName="FusionDocHoleThreadNoteLeader" devLabel="Hole and Thread Note" translation="孔和螺纹注释"/>
	<label commandName="FusionDocIncludeMeshTip" devLabel="Meshes with more than 500,000 triangles are hidden. Making them visible will take considerable time and may adversely affect performance." translation="包含 500,000 多个三角形的网格处于隐藏状态。使这些网格可见需要很长时间，并且可能会对性能产生负面影响。"/>
	<label commandName="FusionDocIncludeMeshTip2" devLabel="&lt;b&gt;Meshes with more than 500,000 triangles are hidden. Making them visible will take considerable time and may adversely affect performance.&lt;/b&gt;" translation="&lt;b&gt;包含 500,000 多个三角形的网格处于隐藏状态。使这些网格可见需要很长时间，并且可能会对性能产生负面影响。&lt;/b&gt;"/>
	<label commandName="FusionDocIncompatibleDrawingStd" devLabel="Importing the symbol from a file that uses a different drawing standard may unexpectedly alter dimension values." translation="从使用其他绘图标准的文件导入符号可能会意外改变尺寸值。"/>
	<label commandName="FusionDocIncompatibleDrawingStdBtnText" devLabel="Import anyway" translation="仍要导入"/>
	<label commandName="FusionDocIncompatibleDrawingStdTitle" devLabel="Incompatible drawing standard" translation="不兼容的绘图标准"/>
	<label commandName="FusionDocInsertTitleBlockFailed" devLabel="Title block insert failed.&lt;br/&gt;For help with preparing DWG files for use as title blocks, see &lt;a href='%1%'&gt;More Information&lt;/a&gt;" translation="标题栏插入失败。&lt;br/&gt;有关如何准备要用作标题栏的 DWG 文件的帮助，请参见&lt;a href='%1%'&gt;详细信息&lt;/a&gt;"/>
	<label commandName="FusionDocInsertTitleBlockInvalidObject" devLabel="This DWG file can't be inserted because it contains one or more blocks or xrefs. Remove these objects and try inserting again.&lt;br/&gt;For help with preparing DWG files for use as title blocks, see &lt;a href='%1%'&gt;More Information&lt;/a&gt;" translation="由于此 DWG 文件包含一个或多个块或外部参照，因此无法插入。请删除这些对象，然后尝试重新插入。&lt;br/&gt;有关如何准备要用作标题栏的 DWG 文件的帮助，请参见&lt;a href='%1%'&gt;详细信息&lt;/a&gt;"/>
	<label commandName="FusionDocInsertTitleBlockNameConflict" devLabel="This DWG file can't be inserted because its name conflicts with an existing object. Rename the DWG file and try inserting again.&lt;br/&gt;For help with preparing DWG files for use as title blocks, see &lt;a href='%1%'&gt;More Information&lt;/a&gt;" translation="由于此 DWG 文件的名称与现有对象冲突，因此无法插入。请重命名此 DWG 文件，然后尝试重新插入。&lt;br/&gt;有关如何准备要用作标题栏的 DWG 文件的帮助，请参见&lt;a href='%1%'&gt;详细信息&lt;/a&gt;"/>
	<label commandName="FusionDocInsertTitleBlockObjectFiltered" devLabel="This DWG file contains one or more fields, 3D solids, or geolocation points. These objects have been automatically removed from the title block.&lt;br/&gt;For help with preparing DWG files for use as title blocks, see &lt;a href='%1%'&gt;More Information&lt;/a&gt;" translation="此 DWG 文件包含一个或多个场地、三维实体或地理位置点。这些对象已从标题栏中自动删除。&lt;br/&gt;有关如何准备要用作标题栏的 DWG 文件的帮助，请参见&lt;a href='%1%'&gt;详细信息&lt;/a&gt;"/>
	<label commandName="FusionDocInvalidFile" devLabel="&lt;b&gt;%1%&lt;/b&gt; has been corrupted&lt;br/&gt;&lt;br/&gt;The file has been corrupted and can no longer be opened by Fusion" translation="&lt;b&gt;%1%&lt;/b&gt; 已损坏&lt;br/&gt;&lt;br/&gt;该文件已损坏，Fusion 无法再将其打开"/>
	<label commandName="FusionDocLabelDef" devLabel="Label" translation="标签"/>
	<label commandName="FusionDocLeader" devLabel="Note" translation="注释"/>
	<label commandName="FusionDocLegacyTextEdit" devLabel="Legacy Text Edit" translation="旧文本编辑"/>
	<label commandName="FusionDocLine" devLabel="Line" translation="直线"/>
	<label commandName="FusionDocLinearDimension" devLabel="Linear Dimension" translation="线性标注"/>
	<label commandName="FusionDocMText" devLabel="Text" translation="文本"/>
	<label commandName="FusionDocMeasure" devLabel="Measure" translation="测量"/>
	<label commandName="FusionDocMinMaxDimensionCmd" devLabel="Curve Min Max Dimension" translation="曲线最小值/最大值标注"/>
	<label commandName="FusionDocModelPropertyEditCommand" devLabel="Edit Model Property" translation="编辑模型特性"/>
	<label commandName="FusionDocMove" devLabel="Move" translation="移动"/>
	<label commandName="FusionDocMoveDialogTitle" devLabel="MOVE" translation="移动"/>
	<label commandName="FusionDocNewTitleBlock" devLabel="New Title Block" translation="新建标题栏"/>
	<label commandName="FusionDocOffset" devLabel="Offset" translation="偏移"/>
	<label commandName="FusionDocOnlyConsiderVisibleEdges" devLabel="Only Consider Visible Edges Auto View" translation="仅考虑可见边自动视图"/>
	<label commandName="FusionDocOrdinateDimension" devLabel="Ordinate Dimension" translation="坐标标注"/>
	<label commandName="FusionDocOutdatedSheet" devLabel="The sheet is out of date. Make sure the sheet is up to date and try again." translation="该图纸已过期。请确保该图纸是最新的，然后重试。"/>
	<label commandName="FusionDocOutdatedSheets" devLabel="One or more sheets are out of date. Make sure all sheets are up to date and try again." translation="一张或多张图纸将过期。确保所有图纸都是最新的，然后重试。"/>
	<label commandName="FusionDocOverwriteExistingTitleBlock" devLabel="A title block with that name already exists. Do you want to overwrite the existing title block? Overwriting will replace all existing references to this title block in the drawing." translation="具有该名称的标题栏已存在。是否要覆盖现有标题栏？执行覆盖将替换工程图中此标题栏的所有现有参考。"/>
	<label commandName="FusionDocPanCmd" devLabel="Pan" translation="平移"/>
	<label commandName="FusionDocPartsListTable" devLabel="Parts List" translation="明细表"/>
	<label commandName="FusionDocPasteCustomMTextCommand" devLabel="Paste" translation="粘贴"/>
	<label commandName="FusionDocPasteCustomTableCommand" devLabel="Paste" translation="粘贴"/>
	<label commandName="FusionDocPasteDefaultCommand" devLabel="Paste" translation="粘贴"/>
	<label commandName="FusionDocPasteExternalCustomTableCommand" devLabel="Paste" translation="粘贴"/>
	<label commandName="FusionDocPasteGeomEntityCommand" devLabel="Paste" translation="粘贴"/>
	<label commandName="FusionDocPasteSketchCommand" devLabel="Paste" translation="粘贴"/>
	<label commandName="FusionDocPasteTextCommand" devLabel="Paste" translation="粘贴"/>
	<label commandName="FusionDocRadialDimension" devLabel="Radius Dimension" translation="半径标注"/>
	<label commandName="FusionDocRectangle" devLabel="2-Point Rectangle" translation="两点矩形"/>
	<label commandName="FusionDocRedo" devLabel="Redo" translation="重做"/>
	<label commandName="FusionDocRemoveDimensionBreak" devLabel="Remove Dimension Break" translation="删除标注折断"/>
	<label commandName="FusionDocRenumber" devLabel="Renumber" translation="重新编号"/>
	<label commandName="FusionDocReservedTitleBlockName" devLabel="The specified name conflicts with an existing Fusion object. Please choose another name." translation="指定的名称与现有 Fusion 对象冲突。请选择其他名称。"/>
	<label commandName="FusionDocRestoreDefaultsCmd" devLabel="Reset" translation="重置"/>
	<label commandName="FusionDocRevCloudCommand" devLabel="Revision Cloud" translation="修订云线"/>
	<label commandName="FusionDocRevMarker" devLabel="Revision Marker" translation="修订标记"/>
	<label commandName="FusionDocRevMarkerEdit" devLabel="Revision Marker Edit" translation="编辑修订标记"/>
	<label commandName="FusionDocRevisionTable" devLabel="Revision History" translation="修订历史"/>
	<label commandName="FusionDocRevisionTableWarning" devLabel="A revision history already exists in the current sheet. Do you want to add a new entry in the revision history?" translation="当前图纸中已存在修订历史记录。是否要在修订历史中添加新条目？"/>
	<label commandName="FusionDocRotate" devLabel="Rotate" translation="旋转"/>
	<label commandName="FusionDocScreenshotCmd" devLabel="Capture Image" translation="捕获图像..."/>
	<label commandName="FusionDocSelfIntersectingCurveUnsupportedCreation" devLabel="Cut profile must be a single closed contour for the breakout section." translation="剖切轮廓必须是局部剖面的单个闭合轮廓。"/>
	<label commandName="FusionDocSelfIntersectingCurveUnsupportedEdit" devLabel="Cut profile must be a single closed contour for the breakout section." translation="剖切轮廓必须是局部剖面的单个闭合轮廓。"/>
	<label commandName="FusionDocSettingsDelimiterComma" devLabel="Comma" translation="逗号"/>
	<label commandName="FusionDocSettingsDelimiterDecimal" devLabel="Decimal" translation="小数点"/>
	<label commandName="FusionDocSettinsDelimiter" devLabel="Delimiter" translation="分隔符"/>
	<label commandName="FusionDocShowAcCoreConsoleWindowOption" devLabel="Show AcCoreConsole window" translation="显示 AcCoreConsole 窗口"/>
	<label commandName="FusionDocShowAcCoreConsoleWindowToolTip" devLabel="Show AcCoreConsole window" translation="显示 AcCoreConsole 窗口"/>
	<label commandName="FusionDocShowHistoryForDesignCommand" devLabel="Design History" translation="设计历史记录"/>
	<label commandName="FusionDocShowHistoryForDrawingCommand" devLabel="Drawing History" translation="工程图历史记录"/>
	<label commandName="FusionDocShowHistoryForDrawingToolbarCommand" devLabel="History" translation="历史记录"/>
	<label commandName="FusionDocSingleBodySection" devLabel="Only Single Body Sectional View" translation="仅单个实体剖视图"/>
	<label commandName="FusionDocSingleDimensionCmdDef" devLabel="Dimension" translation="尺寸标注"/>
	<label commandName="FusionDocSingleSheetDisassociatedAnnotations" devLabel="Sheet contains disassociated annotations. If you continue, your drawing may contain errors." translation="图纸包含已解除关联的标注。如果继续，您的图形可能包含错误。"/>
	<label commandName="FusionDocSketchCreate" devLabel="Create Sketch" translation="创建草图"/>
	<label commandName="FusionDocSourceFileHasBeenMoved" devLabel="Drawing has been moved or copied, would you like to associate it with a new model?" translation="已移动或复制工程图，是否想要将其与新模型关联？"/>
	<label commandName="FusionDocSplineBalloon" devLabel="Balloon" translation="引出序号"/>
	<label commandName="FusionDocSurfaceTexture" devLabel="Surface Texture" translation="表面粗糙度"/>
	<label commandName="FusionDocSymbolEdit" devLabel="Symbol Edit" translation="符号编辑"/>
	<label commandName="FusionDocTBMDeleteApply" devLabel="Select a title block to delete" translation="选择要删除的标题栏"/>
	<label commandName="FusionDocTBMDeleteDefault" devLabel="Select a title block to delete" translation="选择要删除的标题栏"/>
	<label commandName="FusionDocTBMDeleteDefaultMSG" devLabel="Cannot delete default title blocks" translation="无法删除默认标题栏"/>
	<label commandName="FusionDocTBMDeleteMSG" devLabel="Delete Title Block" translation="删除标题栏"/>
	<label commandName="FusionDocTBMDeleteReset" devLabel="Select a title block to delete" translation="选择要删除的标题栏"/>
	<label commandName="FusionDocTBMDeleteSelected" devLabel="Apply to current sheet" translation="应用到当前图纸"/>
	<label commandName="FusionDocTBMKWD1" devLabel="A title block with that name already exists." translation="已存在具有该名称的标题栏。"/>
	<label commandName="FusionDocTBMKWD2" devLabel="InvalidTitleBlockRenameNotification" translation="InvalidTitleBlockRenameNotification"/>
	<label commandName="FusionDocTBMKWD3" devLabel="Title block name contains unsupported characters" translation="标题栏名称包含不支持的字符"/>
	<label commandName="FusionDocTBMKWD4" devLabel="Some special characters e.g. '\', ';' etc. are NOT supported." translation="不支持某些特殊字符，例如“\”、“;”等。"/>
	<label commandName="FusionDocTBMKWD5" devLabel="InvalidTitleBlockNameNotification" translation="InvalidTitleBlockNameNotification"/>
	<label commandName="FusionDocTBMRenameApply" devLabel="Select a title block to rename" translation="选择要重命名的标题栏"/>
	<label commandName="FusionDocTBMRenameDefault" devLabel="Select a title block to rename" translation="选择要重命名的标题栏"/>
	<label commandName="FusionDocTBMRenameDefaultMSG" devLabel="Cannot rename default title blocks" translation="无法重命名默认标题栏"/>
	<label commandName="FusionDocTBMRenameMSG" devLabel="Rename Title Block" translation="重命名标题栏"/>
	<label commandName="FusionDocTBMRenameReset" devLabel="Select a title block to rename" translation="选择要重命名的标题栏"/>
	<label commandName="FusionDocTBMSelectRadioButton" devLabel="Apply to current sheet" translation="应用到当前图纸"/>
	<label commandName="FusionDocTable" devLabel="Table" translation="表格"/>
	<label commandName="FusionDocTableEdit" devLabel="Table" translation="表格"/>
	<label commandName="FusionDocTableNoBendInfoInActiveSheetTip" devLabel="The active sheet doesn't contain Bend information" translation="激活的图纸不包含折弯信息"/>
	<label commandName="FusionDocTableNoBendInfoInActiveSheetTip2" devLabel="&lt;b&gt;The active sheet doesn't contain Bend information.&lt;/b&gt;" translation="&lt;b&gt;激活的图纸不包含折弯信息。&lt;/b&gt;"/>
	<label commandName="FusionDocTableNoBendInfoInDesignTip" devLabel="The drawing doesn't contain Bend information" translation="该工程图不包含折弯信息"/>
	<label commandName="FusionDocTableNoBendInfoInDesignTip2" devLabel="&lt;b&gt;The drawing doesn't contain Bend information.&lt;/b&gt;" translation="&lt;b&gt;该工程图不包含折弯信息。&lt;/b&gt;"/>
	<label commandName="FusionDocTableTextEdit" devLabel="Edit Table Text" translation="编辑表格文本"/>
	<label commandName="FusionDocTextEdit" devLabel="TEXT PROPERTIES" translation="文本特性"/>
	<label commandName="FusionDocTitleBlockString" devLabel="Title Block " translation="标题栏 "/>
	<label commandName="FusionDocTitleBlockWarning1" devLabel=" is currently used on following sheets:&#xA;&#xA;" translation=" 当前在以下图纸上使用:&#xA;&#xA;"/>
	<label commandName="FusionDocTitleBlockWarning2" devLabel="&#xA;&#xA;Are you sure you want to delete the title block from these sheets?" translation="&#xA;&#xA;是否确实要从这些图纸中删除标题栏？"/>
	<label commandName="FusionDocTrim" devLabel="Trim" translation="修剪"/>
	<label commandName="FusionDocUndo" devLabel="Undo" translation="撤消"/>
	<label commandName="FusionDocUpdateCommand" devLabel="Get Latest" translation="获取最新版本"/>
	<label commandName="FusionDocUpdateMessage" devLabel="Changes have been made to a referenced design. &#xA;You can update the drawing from the button in the Application Bar." translation="已对参考设计进行了更改。 &#xA;您可以通过应用程序栏中的按钮更新工程图。"/>
	<label commandName="FusionDocViewAuxiliaryDetailViewUnsupported" devLabel="Cannot create auxiliary projected views of a detail view" translation="无法创建局部视图的辅助投影视图"/>
	<label commandName="FusionDocViewAuxiliaryNormalSectionViewUnsupported" devLabel="Cannot create auxiliary view from this section view" translation="无法从此剖视图创建辅助视图"/>
	<label commandName="FusionDocViewBreakoutBrokenViewUnsupported" devLabel="You cannot create a breakout section on a Break View and its linked views." translation="不能在打断视图及其链接视图上创建局部剖面。"/>
	<label commandName="FusionDocViewBreakoutBrokenViewUnsupportedTitle" devLabel="Cannot create breakout section" translation="无法创建局部剖面"/>
	<label commandName="FusionDocViewBreakoutOnBreakoutViewUnsupported" devLabel="You can create only one breakout section on a drawing view." translation="只能在工程视图上创建一个局部剖面。"/>
	<label commandName="FusionDocViewBreakoutOnBreakoutViewUnsupportedTitle" devLabel="View already contains a breakout section" translation="视图已包含局部剖面"/>
	<label commandName="FusionDocViewBreakoutOnSectionChildViewsUnsupported" devLabel="You cannot create a breakout section on a drawing view that already contains a section." translation="不能在已包含剖面的工程视图上创建局部剖面。"/>
	<label commandName="FusionDocViewBreakoutOnSectionChildViewsUnsupportedTitle" devLabel="View already contains a section" translation="视图已包含剖面"/>
	<label commandName="FusionDocViewBreakoutSectionViewUnsupported" devLabel="You cannot create a breakout section on Section Views." translation="不能在剖视图上创建局部剖面。"/>
	<label commandName="FusionDocViewBreakoutSectionViewUnsupportedTitle" devLabel="Cannot create breakout section" translation="无法创建局部剖面"/>
	<label commandName="FusionDocViewBrokenBreakoutViewUnsupportedTitle" devLabel="Cannot create Break View" translation="无法创建打断视图"/>
	<label commandName="FusionDocViewDetailDetailViewUnsupported" devLabel="Cannot detail a detail view" translation="无法详细显示局部视图"/>
	<label commandName="FusionDocViewDetailSectionViewUnsupported" devLabel="Cannot detail a section view" translation="无法详细显示剖视图"/>
	<label commandName="FusionDocViewProjDetailViewUnsupported" devLabel="Cannot project a detail view" translation="无法投影局部视图"/>
	<label commandName="FusionDocViewProjNormalSectionViewUnsupported" devLabel="Cannot project this section view" translation="无法投影该剖视图"/>
	<label commandName="FusionDocViewProjSectionViewUnsupported" devLabel="Cannot project a section view" translation="无法投影剖视图"/>
	<label commandName="FusionDocViewRedrawProfileBtnText" devLabel="Redraw Profile" translation="重画轮廓"/>
	<label commandName="FusionDocViewSectionDetailViewUnsupported" devLabel="Cannot section a detail view" translation="无法剖切局部视图"/>
	<label commandName="FusionDocViewSectionNormalSectionViewUnsupported" devLabel="Cannot section this section view" translation="无法剖分该剖视图"/>
	<label commandName="FusionDocViewSectionSectionViewUnsupported" devLabel="Cannot section a section view" translation="无法剖切剖视图"/>
	<label commandName="FusionDocViewSelfIntersectingCurveUnsupportedBreakoutTitle" devLabel="Profile contains multiple closed contours" translation="轮廓包含多个闭合轮廓"/>
	<label commandName="FusionDocViewSelfIntersectingCurveUnsupportedTitle" devLabel="Profile contains multiple closed contours" translation="轮廓包含多个闭合轮廓"/>
	<label commandName="FusionDocViewUnsupportedTitle" devLabel="Unsupported Drawing View" translation="不支持的工程视图"/>
	<label commandName="FusionDocWaitForDebuggerOption" devLabel="Wait for Debugger" translation="等待调试器运行"/>
	<label commandName="FusionDocWaitForDebuggerToolTip" devLabel="Causes AcCoreConsole to pause on startup" translation="导致 AcCoreConsole 在启动时暂停"/>
	<label commandName="FusionDocWeldSymbol" devLabel="Welding" translation="焊接"/>
	<label commandName="FusionDocZoomCmd" devLabel="Zoom Window" translation="窗口缩放"/>
	<label commandName="FusionDocumentSettingsACMStandardsGroup" devLabel="Standards" translation="标准"/>
	<label commandName="FusionDocumentSettingsAddIsoViewWithOrthographicViews" devLabel="Add Isometric View" translation="添加等轴测视图"/>
	<label commandName="FusionDocumentSettingsAddIsoViewWithOrthographicViewsDesc" devLabel="Adds an isometric view of your folded model." translation="添加折叠模型的等轴测视图。"/>
	<label commandName="FusionDocumentSettingsAltUnitLinearPrecision" devLabel="Linear Precision" translation="线性精度"/>
	<label commandName="FusionDocumentSettingsAltUnitLinearTolPrecision" devLabel="Linear Tolerance Precision" translation="线性公差精度"/>
	<label commandName="FusionDocumentSettingsAltUnitsDisplatTrailingZeros" devLabel="Trailing Zeros" translation="尾随零"/>
	<label commandName="FusionDocumentSettingsAltUnitsDisplayLeadingZeros" devLabel="Leading Zeros" translation="前导零"/>
	<label commandName="FusionDocumentSettingsAltUnitsDisplaySuffix" devLabel="Unit Abbreviation" translation="单位缩写"/>
	<label commandName="FusionDocumentSettingsAltUnitsZerosAndUnits" devLabel="Zeros/Units" translation="零/单位"/>
	<label commandName="FusionDocumentSettingsAlternateDimUnit" devLabel="Alternate Units" translation="换算单位"/>
	<label commandName="FusionDocumentSettingsAlternateDimensionUnits" devLabel="Units" translation="单位"/>
	<label commandName="FusionDocumentSettingsAlternateLinearFormat" devLabel="Format" translation="格式"/>
	<label commandName="FusionDocumentSettingsAnimation" devLabel="Animation" translation="动画"/>
	<label commandName="FusionDocumentSettingsAnimationDesc" devLabel="Creates a sheet for the exploded view from a storyboard created in the Animation workspace." translation="通过在“动画”工作空间中创建的故事板，为分解视图创建图纸。"/>
	<label commandName="FusionDocumentSettingsAutoArrangeDimension" devLabel="Auto Arrange Dimension" translation="自动排列尺寸标注"/>
	<label commandName="FusionDocumentSettingsAutoDimension" devLabel="Auto Dimensions" translation="自动尺寸标注"/>
	<label commandName="FusionDocumentSettingsAutoDimensionDesc" devLabel="Automatically adds dimensions to views." translation="自动向视图添加尺寸标注。"/>
	<label commandName="FusionDocumentSettingsAutoDimensionDimensions" devLabel="Auto-Dimension" translation="自动尺寸标注"/>
	<label commandName="FusionDocumentSettingsAutoDimensionDimensionsDesc" devLabel="Automatically adds various types of dimensions to a sheet." translation="自动将各种类型的尺寸标注添加到图纸。"/>
	<label commandName="FusionDocumentSettingsBendTableDefaultLocation" devLabel="Bend Table Location" translation="折弯表位置"/>
	<label commandName="FusionDocumentSettingsBendTableDefaultLocationDesc" devLabel="Specifies the location of the bend table on the sheet." translation="指定折弯表在图纸上的位置。"/>
	<label commandName="FusionDocumentSettingsCircularPatternDimensions" devLabel="Circular Pattern Dimensions" translation="环形阵列尺寸"/>
	<label commandName="FusionDocumentSettingsComponent" devLabel="Component" translation="零部件"/>
	<label commandName="FusionDocumentSettingsComponentDesc" devLabel="Creates a sheet for this component only." translation="仅为该零部件创建图纸。"/>
	<label commandName="FusionDocumentSettingsDatumIDStandard" devLabel="Datum Identifier" translation="基准标识符号"/>
	<label commandName="FusionDocumentSettingsDefaultOrigin" devLabel="Default Origin" translation="默认原点"/>
	<label commandName="FusionDocumentSettingsDefaultToLowDensityDimension" devLabel="Default To Low Density Dimension" translation="默认为低密度标注"/>
	<label commandName="FusionDocumentSettingsDimensionAssemblies" devLabel="Dimension Assemblies" translation="标注部件"/>
	<label commandName="FusionDocumentSettingsDimensionComponents" devLabel="Dimension Components" translation="标注零部件"/>
	<label commandName="FusionDocumentSettingsDimensionStrategy" devLabel="Dimension Strategy" translation="标注策略"/>
	<label commandName="FusionDocumentSettingsDimensionStrategyDesc" devLabel="Controls how dimensions display on the sheet." translation="控制尺寸标注在图纸上的显示方式。"/>
	<label commandName="FusionDocumentSettingsDisplayLineWidthsInput" devLabel="Display Line Widths" translation="显示线宽"/>
	<label commandName="FusionDocumentSettingsEdgeSymbolStandard" devLabel="Edge" translation="边"/>
	<label commandName="FusionDocumentSettingsFCFStandard" devLabel="Feature Control Frame" translation="形位公差符号"/>
	<label commandName="FusionDocumentSettingsFilterComponentsbyGeometry" devLabel="Detect and Omit Fasteners" translation="检测并忽略紧固件"/>
	<label commandName="FusionDocumentSettingsFilterComponentsbyGeometryDesc" devLabel="Omits the fasteners during the automatic drawing creation process." translation="在自动工程图创建过程中忽略紧固件。"/>
	<label commandName="FusionDocumentSettingsFoldedMetalIsoViewWithOrthoViews" devLabel="Add Folded Model Isometric View" translation="添加折叠模型等轴测视图"/>
	<label commandName="FusionDocumentSettingsFoldedMetalIsoViewWithOrthoViewsDesc" devLabel="Adds an isometric view of your folded model." translation="添加折叠模型的等轴测视图。"/>
	<label commandName="FusionDocumentSettingsFontInput" devLabel="Font" translation="字体"/>
	<label commandName="FusionDocumentSettingsGenerationOption" devLabel="Generation Options" translation="生成选项"/>
	<label commandName="FusionDocumentSettingsGroupAnnotateDrawings" devLabel="Annotation Options" translation="标注选项"/>
	<label commandName="FusionDocumentSettingsGroupAutomatedDrawingGeneration" devLabel="Automated Drawing Generation" translation="自动生成工程图"/>
	<label commandName="FusionDocumentSettingsGroupAutomationDimensions" devLabel="Dimensions" translation="尺寸标注"/>
	<label commandName="FusionDocumentSettingsGroupAutomationDimensionsDesc" devLabel="Controls the automatic dimensioning." translation="控制自动尺寸标注。"/>
	<label commandName="FusionDocumentSettingsGroupDimensions" devLabel="Units" translation="单位"/>
	<label commandName="FusionDocumentSettingsGroupGenerateSheet" devLabel="Generate Sheet" translation="生成图纸"/>
	<label commandName="FusionDocumentSettingsGroupGenerateSheetDesc" devLabel="Creates sheets for the selected design entities." translation="为选定的设计实体创建图纸。"/>
	<label commandName="FusionDocumentSettingsGroupGlobalOptions" devLabel="Omit Components" translation="省略零部件"/>
	<label commandName="FusionDocumentSettingsGroupGlobalOptionsDesc" devLabel="Controls for which components a sheet will not be created." translation="控制不会为哪些零部件创建图纸。"/>
	<label commandName="FusionDocumentSettingsGroupLineWidth" devLabel="Line Widths" translation="线宽"/>
	<label commandName="FusionDocumentSettingsGroupPerSheetOptions" devLabel="Per Sheet Options" translation="每张图纸选项"/>
	<label commandName="FusionDocumentSettingsGroupRevisionHistory" devLabel="Revision History" translation="修订历史"/>
	<label commandName="FusionDocumentSettingsGroupText" devLabel="Text" translation="文本"/>
	<label commandName="FusionDocumentSettingsHolePreferences" devLabel="Hole Preferences" translation="孔首选项"/>
	<label commandName="FusionDocumentSettingsHolePreferencesDesc" devLabel="Controls how hole details are displayed in the drawing." translation="控制孔详细信息在工程图中的显示方式。"/>
	<label commandName="FusionDocumentSettingsIncludeBendTable" devLabel="Include Bend Table" translation="包括折弯表"/>
	<label commandName="FusionDocumentSettingsIncludeBendTableDesc" devLabel="Adds a bend table with information about each sheet metal bend in a flat pattern reference." translation="添加包含展开模式参考中每个钣金折弯相关信息的折弯表。"/>
	<label commandName="FusionDocumentSettingsIncludePartList" devLabel="Include Parts List" translation="包括明细表"/>
	<label commandName="FusionDocumentSettingsIncludePartListDesc" devLabel="Adds a detailed parts list to the sheet, listing all components in the assembly." translation="将详细的明细表添加到图纸中，并列出部件中的所有零部件。"/>
	<label commandName="FusionDocumentSettingsLargeTextHeighCustomtInput" devLabel="Large Text Height" translation="大文本高度"/>
	<label commandName="FusionDocumentSettingsLargeTextHeightInput" devLabel="Large Text Height" translation="大文本高度"/>
	<label commandName="FusionDocumentSettingsLineWidthGroupInput" devLabel="Line Width Group" translation="线宽组"/>
	<label commandName="FusionDocumentSettingsMainAssemblyGenerateSheet" devLabel="Main Assembly" translation="主部件"/>
	<label commandName="FusionDocumentSettingsMainAssemblyGenerateSheetDesc" devLabel="Creates a sheet for the top-level assembly that includes all sub-assemblies and components." translation="为包含所有子部件和零部件的顶级部件创建图纸。"/>
	<label commandName="FusionDocumentSettingsMassPrecisionInput" devLabel="Mass precision" translation="质量精度"/>
	<label commandName="FusionDocumentSettingsMassUnitsInput" devLabel="Mass" translation="质量"/>
	<label commandName="FusionDocumentSettingsMediumLineWidthInput" devLabel="Medium Line Width" translation="中等线宽"/>
	<label commandName="FusionDocumentSettingsMediumLineWidthInputCustom" devLabel="Medium Line Width" translation="中等线宽"/>
	<label commandName="FusionDocumentSettingsMediumTextHeightCustomInput" devLabel="Medium Text Height" translation="中等文本高度"/>
	<label commandName="FusionDocumentSettingsMediumTextHeightInput" devLabel="Medium Text Height" translation="中等文本高度"/>
	<label commandName="FusionDocumentSettingsPartsListLocation" devLabel="Parts List Location" translation="明细表位置"/>
	<label commandName="FusionDocumentSettingsPartsListLocationDesc" devLabel="Specifies the location of the parts list on the sheet." translation="指定明细表在图纸上的位置。"/>
	<label commandName="FusionDocumentSettingsPrimaryAngularPrecisionInput" devLabel="Angular Precision" translation="角度精度"/>
	<label commandName="FusionDocumentSettingsPrimaryDimensionUnits" devLabel="Units" translation="单位"/>
	<label commandName="FusionDocumentSettingsPrimaryDisplayLeadingZeroInput" devLabel="Leading Zeros" translation="前导零"/>
	<label commandName="FusionDocumentSettingsPrimaryDisplaySuffixInput" devLabel="Unit Abbreviation" translation="单位缩写"/>
	<label commandName="FusionDocumentSettingsPrimaryDisplayTrailingZeroInput" devLabel="Trailing Zeros" translation="尾随零"/>
	<label commandName="FusionDocumentSettingsPrimaryLinearFormatInput" devLabel="Format" translation="格式"/>
	<label commandName="FusionDocumentSettingsPrimaryLinearPrecisionInput" devLabel="Linear Precision" translation="线性精度"/>
	<label commandName="FusionDocumentSettingsPrimaryLinearTolPrecisionInput" devLabel="Linear Tolerance Precision" translation="线性公差精度"/>
	<label commandName="FusionDocumentSettingsPrimaryUnitsZerosAndUnits" devLabel="Zeros/Units" translation="零/单位"/>
	<label commandName="FusionDocumentSettingsProjectionAngle" devLabel="Projection Angle" translation="投影角度"/>
	<label commandName="FusionDocumentSettingsPushToTemplate" devLabel="Push To Template    " translation="推送到模板    "/>
	<label commandName="FusionDocumentSettingsRevisionNumberingInput" devLabel="Numbering" translation="编号"/>
	<label commandName="FusionDocumentSettingsRevisionScopeInput" devLabel="Revision Scope" translation="修订范围"/>
	<label commandName="FusionDocumentSettingsSectionLineDisplay" devLabel="Display Section Line" translation="显示剖切线"/>
	<label commandName="FusionDocumentSettingsSheetMetalFlatPattern" devLabel="Flat Pattern" translation="展开模式"/>
	<label commandName="FusionDocumentSettingsSheetMetalFlatPatternDesc" devLabel="Creates a sheet for the flat pattern view." translation="为展开模式视图创建图纸。"/>
	<label commandName="FusionDocumentSettingsSheetMetalFolded" devLabel="Folded Model" translation="折叠模型"/>
	<label commandName="FusionDocumentSettingsSheetMetalFoldedDesc" devLabel="Creates a sheet for the folded model view." translation="为折叠模型视图创建图纸。"/>
	<label commandName="FusionDocumentSettingsSheetType" devLabel="Sheet Type" translation="图纸类型"/>
	<label commandName="FusionDocumentSettingsSheetWithOrthoViews" devLabel="Sheet with Orthogonal Views" translation="具有正交视图的图纸"/>
	<label commandName="FusionDocumentSettingsSheetWithOrthoViewsDesc" devLabel="Displays optimised orthogonal views on the sheet." translation="在图纸上显示优化的正交视图。"/>
	<label commandName="FusionDocumentSettingsSheetWithSingleISOView" devLabel="Sheet with Single ISO View" translation="带单个 ISO 视图的图纸"/>
	<label commandName="FusionDocumentSettingsSheetWithSingleISOViewDesc" devLabel="Displays a single isometric view on the sheet." translation="在图纸上显示单个等轴测视图。"/>
	<label commandName="FusionDocumentSettingsSmallTextHeightCustomInput" devLabel="Small Text Height" translation="小文本高度"/>
	<label commandName="FusionDocumentSettingsSmallTextHeightInput" devLabel="Small Text Height" translation="小文本高度"/>
	<label commandName="FusionDocumentSettingsSmartTempViewMsg" devLabel="" translation=""/>
	<label commandName="FusionDocumentSettingsStandardStringInput" devLabel="Standard             " translation="标准             "/>
	<label commandName="FusionDocumentSettingsSubAssemblyGenerateSheet" devLabel="Sub-Assembly" translation="子部件"/>
	<label commandName="FusionDocumentSettingsSubAssemblyGenerateSheetDesc" devLabel="Creates a sheet for this sub-assembly and its components." translation="为此子部件及其零部件创建图纸。"/>
	<label commandName="FusionDocumentSettingsSurfaceTextureStandard" devLabel="Surface Texture" translation="表面粗糙度"/>
	<label commandName="FusionDocumentSettingsTaperSlopeStandard" devLabel="Taper and Slope" translation="锥度和斜度"/>
	<label commandName="FusionDocumentSettingsTextHeightGroupInput" devLabel="Text Height Group" translation="文本高度组"/>
	<label commandName="FusionDocumentSettingsTextHeightInput" devLabel="Text Height" translation="文本高度"/>
	<label commandName="FusionDocumentSettingsThickLineWidthInput" devLabel="Thick Line Width" translation="粗线宽"/>
	<label commandName="FusionDocumentSettingsThickLineWidthInputCustom" devLabel="Thick Line Width" translation="粗线宽"/>
	<label commandName="FusionDocumentSettingsThinLineWidthInput" devLabel="Thin Line Width" translation="细线宽"/>
	<label commandName="FusionDocumentSettingsThinLineWidthInputCustom" devLabel="Thin Line Width" translation="细线宽"/>
	<label commandName="FusionDocumentSettingsUnits" devLabel="Units" translation="单位"/>
	<label commandName="FusionDocumentSettingsWeldingStandard" devLabel="Welding" translation="焊接"/>
	<label commandName="FusionDrawingActivateEnvironmentCommand" devLabel="Workspace" translation="工作空间"/>
	<label commandName="FusionDrawingAlignBalloonCommand" devLabel="Align Balloons" translation="对齐引出序号"/>
	<label commandName="FusionDrawingArcCenterCommandDesc" devLabel="ArcCenter" translation="圆弧圆心"/>
	<label commandName="FusionDrawingArcCommandDesc" devLabel="3-Point Arc" translation="三点圆弧"/>
	<label commandName="FusionDrawingArcTangentCommandDesc" devLabel="ArcTangent" translation="圆弧切线"/>
	<label commandName="FusionDrawingAttDefCommandDesc" devLabel="Attribute" translation="属性"/>
	<label commandName="FusionDrawingAttEditCommandDesc" devLabel="Attribute Definition Edit" translation="属性定义编辑"/>
	<label commandName="FusionDrawingAttributeCommandDialogTitle1" devLabel="ATTRIBUTE" translation="属性"/>
	<label commandName="FusionDrawingAutoDimensionCommand" devLabel="Auto Dimension" translation="自动标注"/>
	<label commandName="FusionDrawingAutoDimensionEdit" devLabel="Edit Auto Dimensions" translation="编辑自动标注"/>
	<label commandName="FusionDrawingBadInstallMessage" devLabel="&lt;b&gt;%1% Drawings cannot launch&lt;/b&gt;&lt;br /&gt;&lt;br /&gt;An installation issue is preventing %1% Drawings from launching. Please follow the uninstall information at the link below and then reinstall in order to create a drawing.&lt;br /&gt;&lt;br /&gt;&lt;a href='https://knowledge.autodesk.com/support/fusion-360/troubleshooting/caas/sfdcarticles/sfdcarticles/How-to-do-an-automatic-Clean-Uninstall-for-Autodesk-Fusion-360.html'&gt;How to uninstall %1%&lt;/a&gt;&lt;br /&gt;&lt;br /&gt;If you have reinstalled and are still encountering this message please contact support and we will respond promptly. Closing this dialog will return you to your design." translation="&lt;b&gt;%1% 工程图无法启动&lt;/b&gt;&lt;br /&gt;&lt;br /&gt;%1% 工程图因为安装问题无法启动。请单击以下链接，按照所提供的卸载信息进行操作，然后重新安装以创建工程图。&lt;br /&gt;&lt;br /&gt;&lt;a href='https://knowledge.autodesk.com/support/fusion-360/troubleshooting/caas/sfdcarticles/sfdcarticles/How-to-do-an-automatic-Clean-Uninstall-for-Autodesk-Fusion-360.html'&gt;如何卸载 %1%&lt;/a&gt;&lt;br /&gt;&lt;br /&gt;如果重新安装后仍显示此消息，请与支持人员联系，我们将迅速做出回应。关闭此对话框将返回到设计。"/>
	<label commandName="FusionDrawingBalloonCommandDesc" devLabel="Baloon" translation="引出序号"/>
	<label commandName="FusionDrawingBaseViewPlaceHolder" devLabel="Base View Placeholder" translation="基础视图占位符"/>
	<label commandName="FusionDrawingBlockEditorImageInsert" devLabel="Image" translation="图像"/>
	<label commandName="FusionDrawingBreakLinkTable" devLabel="Break" translation="打断"/>
	<label commandName="FusionDrawingBreakoutSectionView" devLabel="Breakout Section View" translation="局部剖视图"/>
	<label commandName="FusionDrawingBreakoutSectionViewEdit" devLabel="Edit Breakout Section View" translation="编辑局部剖视图"/>
	<label commandName="FusionDrawingBrowserSheetName" devLabel="Sheet" translation="图纸"/>
	<label commandName="FusionDrawingCentermarkCommandDesc" devLabel="Center Mark" translation="中心标记"/>
	<label commandName="FusionDrawingCircle2PointCommandDesc" devLabel="Circle2Point" translation="圆，两点"/>
	<label commandName="FusionDrawingCircle3PointCommandDesc" devLabel="Circle3Point" translation="圆，三点"/>
	<label commandName="FusionDrawingCircleCommandDesc" devLabel="Center Radius Circle" translation="圆心半径圆"/>
	<label commandName="FusionDrawingCircleDiameterCommandDesc" devLabel="CircleDiameter" translation="圆，直径"/>
	<label commandName="FusionDrawingConfigTable" devLabel="Configuration Table" translation="配置表"/>
	<label commandName="FusionDrawingContentsInput" devLabel="Contents" translation="内容"/>
	<label commandName="FusionDrawingContentsInputDesc" devLabel="Select the contents to include in your drawing." translation="选择要包含在工程图中的内容。"/>
	<label commandName="FusionDrawingContinue" devLabel="Continue" translation="继续"/>
	<label commandName="FusionDrawingCopyCommandDesc" devLabel="Copy" translation="复制"/>
	<label commandName="FusionDrawingCreatePartsListCommand" devLabel="Parts List" translation="明细表"/>
	<label commandName="FusionDrawingCreateSketchSymbolCmdName" devLabel="Create Sketch Symbol" translation="创建草图符号"/>
	<label commandName="FusionDrawingCustomSheetHeightInput" devLabel="Height" translation="高度"/>
	<label commandName="FusionDrawingCustomSheetWidthInput" devLabel="Width" translation="宽度"/>
	<label commandName="FusionDrawingDimensionAlignArrange" devLabel="Align Dimensions" translation="对齐标注"/>
	<label commandName="FusionDrawingDimensionArrange" devLabel="Arrange Dimensions" translation="排列标注"/>
	<label commandName="FusionDrawingDimensionStackArrange" devLabel="Stack Dimensions" translation="堆叠标注"/>
	<label commandName="FusionDrawingDocumentSettingsCommandDialogTitle" devLabel="Document Settings" translation="文档设置"/>
	<label commandName="FusionDrawingDrawingBendID" devLabel="Bend Identifier" translation="折弯标识符"/>
	<label commandName="FusionDrawingDrawingBlockRefEdit" devLabel="Properties" translation="特性"/>
	<label commandName="FusionDrawingEllipseCommandDesc" devLabel="Ellipse" translation="椭圆"/>
	<label commandName="FusionDrawingExtendCommandDesc" devLabel="Extend" translation="延伸"/>
	<label commandName="FusionDrawingFeatureToggle" devLabel="Feature Toggle..." translation="功能切换..."/>
	<label commandName="FusionDrawingFeatureToggleCommandDesc" devLabel="Feature Toggle" translation="功能切换"/>
	<label commandName="FusionDrawingFlipDimArrow" devLabel="Flip Arrows" translation="翻转箭头"/>
	<label commandName="FusionDrawingFlipDimArrowCntxMenu" devLabel="Flip Arrows" translation="翻转箭头"/>
	<label commandName="FusionDrawingFullAssemblyOption" devLabel="Full Assembly" translation="完整部件"/>
	<label commandName="FusionDrawingHoleTable" devLabel="Hole Table" translation="孔表"/>
	<label commandName="FusionDrawingHorizontalZonesInput" devLabel="Horizontal Zones" translation="水平区域"/>
	<label commandName="FusionDrawingImageEdit" devLabel="Image" translation="图像"/>
	<label commandName="FusionDrawingImageInsert" devLabel="Insert Image" translation="插入图像"/>
	<label commandName="FusionDrawingInsertSketchSymbolCmdName" devLabel="Insert Sketch Symbol" translation="插入草图符号"/>
	<label commandName="FusionDrawingJoggedRadiusDimensionCmd" devLabel="Jogged Radial Dimension" translation="折弯半径标注"/>
	<label commandName="FusionDrawingLabelDefCommandDesc" devLabel="Label" translation="标签"/>
	<label commandName="FusionDrawingLeaderCommandDialogTitle" devLabel="NOTE" translation="注释"/>
	<label commandName="FusionDrawingLineCommandDesc" devLabel="Line" translation="直线"/>
	<label commandName="FusionDrawingMLeaderContentEdit" devLabel="Edit Leader Text" translation="编辑引线文本"/>
	<label commandName="FusionDrawingMTextCommandDesc" devLabel="Text" translation="文本"/>
	<label commandName="FusionDrawingMTextEdit" devLabel="Edit Text" translation="编辑文本"/>
	<label commandName="FusionDrawingManageSketchSymbolCmdName" devLabel="Manage Sketch Symbols" translation="管理草图符号"/>
	<label commandName="FusionDrawingMatchDimCntxMenu" devLabel="Match Dimension" translation="匹配标注"/>
	<label commandName="FusionDrawingMatchDimension" devLabel="Match Dimension" translation="匹配标注"/>
	<label commandName="FusionDrawingMeasureCommandDesc" devLabel="Measure" translation="测量"/>
	<label commandName="FusionDrawingMoveCmdDesc" devLabel="Move" translation="移动"/>
	<label commandName="FusionDrawingMultiSheetDelete" devLabel="Delete Sheets" translation="删除图纸"/>
	<label commandName="FusionDrawingNewTableCommandDialogTitle" devLabel="TABLE" translation="表"/>
	<label commandName="FusionDrawingNewTableCommandName" devLabel="Table" translation="表格"/>
	<label commandName="FusionDrawingNewTableTemplateCommandDesc" devLabel="Table Placeholder" translation="表占位符"/>
	<label commandName="FusionDrawingNewTableTemplateCommandName" devLabel="Table Placeholder" translation="表占位符"/>
	<label commandName="FusionDrawingNoteCommand" devLabel="Note" translation="注释"/>
	<label commandName="FusionDrawingNumberingCommandDialogTitle1" devLabel="Label" translation="标签"/>
	<label commandName="FusionDrawingOffsetCommandDesc" devLabel="Offset" translation="偏移"/>
	<label commandName="FusionDrawingPrint" devLabel="Print..." translation="打印..."/>
	<label commandName="FusionDrawingPrintCommandDesc" devLabel="Print" translation="打印"/>
	<label commandName="FusionDrawingPrintSelectedSheets" devLabel="Print" translation="打印"/>
	<label commandName="FusionDrawingPrintSingleSheet" devLabel="Print" translation="打印"/>
	<label commandName="FusionDrawingQuickAutoDimensionCommand" devLabel="Quick Auto Dimension" translation="快速自动标注"/>
	<label commandName="FusionDrawingRectangleCommandDesc" devLabel="2-Point Rectangle" translation="两点矩形"/>
	<label commandName="FusionDrawingReplaceDimensionWithConfigAspectCmd" devLabel="Replace with Configured Aspect" translation="替换为已配置的方面"/>
	<label commandName="FusionDrawingRepresentationFlatPattern" devLabel="Flat Pattern" translation="展开模式"/>
	<label commandName="FusionDrawingRepresentationFoldedModel" devLabel="Folded Model" translation="折叠模型"/>
	<label commandName="FusionDrawingRepresentationInput" devLabel="Representation" translation="表达"/>
	<label commandName="FusionDrawingRotateCmdDesc" devLabel="Rotate" translation="旋转"/>
	<label commandName="FusionDrawingSelectOption" devLabel="Select" translation="选择"/>
	<label commandName="FusionDrawingSheetActivate" devLabel="Activate Sheet" translation="激活图纸"/>
	<label commandName="FusionDrawingSheetAdd" devLabel="Add Sheet" translation="添加图纸"/>
	<label commandName="FusionDrawingSheetDelete" devLabel="Delete Sheet" translation="删除图纸"/>
	<label commandName="FusionDrawingSheetDuplicate" devLabel="Duplicate Sheet" translation="复制图纸"/>
	<label commandName="FusionDrawingSheetHeightInput" devLabel="Height" translation="高度"/>
	<label commandName="FusionDrawingSheetNew" devLabel="Quick Add" translation="快速添加"/>
	<label commandName="FusionDrawingSheetRename" devLabel="Rename Sheet" translation="重命名图纸"/>
	<label commandName="FusionDrawingSheetReorder" devLabel="Reorder Sheet" translation="重排序图纸"/>
	<label commandName="FusionDrawingSheetWidthInput" devLabel="Width" translation="宽度"/>
	<label commandName="FusionDrawingShowAllChildCommand" devLabel="Show All Components" translation="显示所有零部件"/>
	<label commandName="FusionDrawingShowAllCommand" devLabel="Show All Components" translation="显示所有零部件"/>
	<label commandName="FusionDrawingShowHideCommand" devLabel="Show/Hide" translation="显示/隐藏"/>
	<label commandName="FusionDrawingSingleDimensionCmdDesc" devLabel="Dimension" translation="尺寸"/>
	<label commandName="FusionDrawingSketchClose" devLabel="Finish Sketch" translation="完成草图"/>
	<label commandName="FusionDrawingSketchCloseCommandDesc" devLabel="Finish Sketch" translation="完成草图"/>
	<label commandName="FusionDrawingSketchCommandDesc" devLabel="Create Sketch" translation="创建草图"/>
	<label commandName="FusionDrawingSketchDelete" devLabel="Delete" translation="删除"/>
	<label commandName="FusionDrawingSketchEdit" devLabel="Edit Sketch" translation="编辑草图"/>
	<label commandName="FusionDrawingSketchRename" devLabel="Rename Sketch" translation="重命名草图"/>
	<label commandName="FusionDrawingSketchSymbolClose" devLabel="Finish Sketch Symbol" translation="完成草图符号"/>
	<label commandName="FusionDrawingSketchSymbolCloseCommand" devLabel="Finish Sketch Symbol" translation="完成草图符号"/>
	<label commandName="FusionDrawingSketchSymbolDialogTitle" devLabel="Sketch Symbols" translation="草图符号"/>
	<label commandName="FusionDrawingSketchSymbolEdit" devLabel="Edit Sketch Symbol" translation="编辑草图符号"/>
	<label commandName="FusionDrawingSketchSymbolLeader" devLabel="Leader Attachment" translation="引线附着"/>
	<label commandName="FusionDrawingSketchSymbolLeaderCommand" devLabel="Leader Attachment" translation="引线附着"/>
	<label commandName="FusionDrawingSketchSymbolName" devLabel="Sketch Name" translation="草图名称"/>
	<label commandName="FusionDrawingSketchSymbolNameCommand" devLabel="Sketch Name" translation="草图名称"/>
	<label commandName="FusionDrawingSmartDrawing" devLabel="SmartDrawing" translation="SmartDrawing"/>
	<label commandName="FusionDrawingSmartSheet" devLabel="SmartSheet" translation="SmartSheet"/>
	<label commandName="FusionDrawingSuppressAllExceptSelectedCommand" devLabel="Suppress All Except Selected" translation="除选定项外全部抑制"/>
	<label commandName="FusionDrawingSuppressCommand" devLabel="Suppress" translation="抑制"/>
	<label commandName="FusionDrawingSuppressUnsuppressCommand" devLabel="Suppress/UnSuppress" translation="抑制/取消抑制"/>
	<label commandName="FusionDrawingTableCommandDesc" devLabel="Table" translation="表格"/>
	<label commandName="FusionDrawingTableEditCommandDesc" devLabel="Table Edit" translation="表格编辑"/>
	<label commandName="FusionDrawingTaperSlopeSymbolCmdName" devLabel="Taper and Slope" translation="锥度和斜度"/>
	<label commandName="FusionDrawingTemplateImageInsert" devLabel="Insert Image" translation="插入图像"/>
	<label commandName="FusionDrawingTextCommandDialogTitle1" devLabel="TEXT" translation="文本"/>
	<label commandName="FusionDrawingTidyUpCommand" devLabel="Tidy Up" translation="整理"/>
	<label commandName="FusionDrawingTitleBlockEdit" devLabel="Edit Title Block" translation="编辑标题栏"/>
	<label commandName="FusionDrawingTitleBlockProperties1" devLabel="Title Block" translation="标题栏"/>
	<label commandName="FusionDrawingTrimCommandDesc" devLabel="Trim" translation="修剪"/>
	<label commandName="FusionDrawingUnsuppressAllChildCommand" devLabel="Unsuppress All Components" translation="取消抑制所有零部件"/>
	<label commandName="FusionDrawingUnsuppressAllCommand" devLabel="Unsuppress All Components" translation="取消抑制所有零部件"/>
	<label commandName="FusionDrawingUnsuppressCommand" devLabel="Unsuppress" translation="解除抑制"/>
	<label commandName="FusionDrawingUpdateLinkTable" devLabel="Update" translation="更新"/>
	<label commandName="FusionDrawingVaries" devLabel="*Varies" translation="*变化"/>
	<label commandName="FusionDrawingVerticalZonesInput" devLabel="Vertical Zones" translation="垂直区域"/>
	<label commandName="FusionDrawingView" devLabel="Base View" translation="基础视图"/>
	<label commandName="FusionDrawingViewAuxiliaryCommand" devLabel="Auxiliary View" translation="辅助视图"/>
	<label commandName="FusionDrawingViewBaseTemplateCommandDesc" devLabel="Base View Placeholder" translation="基础视图占位符"/>
	<label commandName="FusionDrawingViewCommandDialogTitle1" devLabel="DRAWING VIEW" translation="工程视图"/>
	<label commandName="FusionDrawingViewCommandDialogTitle2" devLabel="PLACEHOLDER VIEW" translation="占位符视图"/>
	<label commandName="FusionDrawingViewDetail" devLabel="Detail View" translation="局部视图"/>
	<label commandName="FusionDrawingViewEdit" devLabel="Edit View" translation="编辑视图"/>
	<label commandName="FusionDrawingViewPerspective" devLabel="Perspective View" translation="透视图"/>
	<label commandName="FusionDrawingViewProject" devLabel="Projected View" translation="投影视图"/>
	<label commandName="FusionDrawingViewProjectCommandDesc" devLabel="Projected View" translation="投影视图"/>
	<label commandName="FusionDrawingViewProjectTemplateCommandDesc" devLabel="Projected View Placeholder" translation="投影视图占位符"/>
	<label commandName="FusionDrawingViewSection" devLabel="Section View" translation="剖视图"/>
	<label commandName="FusionDrawingViewSimpleSection" devLabel="Simple Section View" translation="简单剖视图"/>
	<label commandName="FusionDrawingViewTemplateProject" devLabel="Projected View Placeholder" translation="投影视图占位符"/>
	<label commandName="FusionDrawingVisibleOnlyOption" devLabel="Visible Only" translation="仅可见"/>
	<label commandName="FusionDrawingsBlockEditorEnv" devLabel="Drawings Block Editor" translation="工程图块编辑器"/>
	<label commandName="FusionDrawingsSketchEnv" devLabel="Drawings Sketch Editor" translation="工程图草图编辑器"/>
	<label commandName="FusionDrawingsSketchSymbolEnv" devLabel="Drawings Sketch Symbol Editor" translation="工程图草图符号编辑器"/>
	<label commandName="FusionEcadOtherSilkscreenVisibilityCommand" devLabel="Show/Hide" translation="显示/隐藏"/>
	<label commandName="FusionEcadReferenceDesignatorsVisibilityCommand" devLabel="Show/Hide" translation="显示/隐藏"/>
	<label commandName="FusionEcadValuesVisibilityCommand" devLabel="Show/Hide" translation="显示/隐藏"/>
	<label commandName="FusionEditPropertiesCommand" devLabel="Edit Properties" translation="编辑特性"/>
	<label commandName="FusionExportDrawingDXFDocument" devLabel="Export Sheet as DXF" translation="将图纸导出为 DXF"/>
	<label commandName="FusionExportDrawingDocument" devLabel="Export DWG" translation="导出 DWG"/>
	<label commandName="FusionExportDrawingDocumentCaption" devLabel="Output DWG" translation="输出 DWG"/>
	<label commandName="FusionExportDrawingDocumentDXFCaption" devLabel="Output Sheet as DXF" translation="将图纸输出为 DXF"/>
	<label commandName="FusionExportDrawingTemplate" devLabel="Output Drawing Template" translation="输出工程图模板"/>
	<label commandName="FusionExportPDF" devLabel="Export PDF" translation="导出 PDF"/>
	<label commandName="FusionExportPDFCaption" devLabel="Export PDF" translation="导出 PDF"/>
	<label commandName="FusionExportPartsList" devLabel="Export CSV" translation="导出 CSV"/>
	<label commandName="FusionExportPartsListCaption" devLabel="Output Table" translation="输出表格"/>
	<label commandName="FusionGripStretch" devLabel="GripStretch" translation="夹点拉伸"/>
	<label commandName="FusionHoleTableEdit" devLabel="HOLE TABLE" translation="孔表"/>
	<label commandName="FusionImportDocSettingsCommand" devLabel="Import Document Settings" translation="导入文档设置"/>
	<label commandName="FusionLayerStackEdit" devLabel="LAYER STACK" translation="层叠"/>
	<label commandName="FusionNewDrawingDocument" devLabel="Create Drawing" translation="创建工程图"/>
	<label commandName="FusionNewDrawingDocumentFromDesign1" devLabel="From Design" translation="从设计"/>
	<label commandName="FusionNewDrawingTemplate" devLabel="New Drawing Template" translation="新建工程图模板"/>
	<label commandName="FusionOriginSymbolEdit" devLabel="ORIGIN" translation="原点"/>
	<label commandName="FusionPartsListEdit" devLabel="PARTS LIST" translation="明细表"/>
	<label commandName="FusionResetPropertiesCommand" devLabel="Reset Properties" translation="重置特性"/>
	<label commandName="FusionRevScopeChangeWarning" devLabel="The change of revision scope will cause in removal of all the revision history data from all sheets. Do you want to continue?" translation="更改修订范围将导致从所有图纸中删除所有修订历史数据。是否要继续？"/>
	<label commandName="FusionRevisionTableEdit" devLabel="REVISION HISTORY" translation="修订历史"/>
	<label commandName="FusionSheetSettingsDisplayBorderInput" devLabel="Display Border" translation="显示边框"/>
	<label commandName="FusionSheetSettingsDisplayTitleBlockInput" devLabel="Display Title Block" translation="显示标题栏"/>
	<label commandName="FusionSheetSettingsSheetSize" devLabel="Sheet Size" translation="图纸尺寸"/>
	<label commandName="FusionSheetSettingsTitleBlock" devLabel="Title Block" translation="标题栏"/>
	<label commandName="FusionSketchHorizontalVerticalCommand" devLabel="Horizontal/Vertical" translation="水平/垂直"/>
	<label commandName="FusionSketchSmartConstraintDim" devLabel="Sketch Dimension" translation="草图尺寸"/>
	<label commandName="FusionTitleBlockManagement" devLabel="Title Blocks" translation="标题栏"/>
	<label commandName="FusionViaPairsEdit" devLabel="VIA PAIRS" translation="过孔对"/>
	<label commandName="GeneralDWG" devLabel="Simplified DWG" translation="简化的 DWG"/>
	<label commandName="GeneralDXF" devLabel="General DXF" translation="常规 DXF"/>
	<label commandName="GeneralGroup" devLabel="General Settings" translation="常规设置"/>
	<label commandName="GenerateAnimationSheet" devLabel="animation" translation="动画"/>
	<label commandName="GenerateAssemblySheet" devLabel="assembly" translation="部件"/>
	<label commandName="GenerateComponentSheet" devLabel="components" translation="零部件"/>
	<label commandName="GenerateFlatPatternSMSheet" devLabel="flat pattern sheet metal" translation="展开模式钣金"/>
	<label commandName="GenerateFoldedSMSheet" devLabel="folded sheet metal" translation="折叠钣金"/>
	<label commandName="GenerateSubAssemblySheet" devLabel="subassembly" translation="子部件"/>
	<label commandName="GettingLatestPIMPropertiesOffline" devLabel="Some properties may be out of date. Go online to get the latest properties." translation="某些特性可能已过期。请联机以获取最新特性。"/>
	<label commandName="GettingLatestPIMPropertiesOnExport" devLabel="Click Refresh to update all properties. This may take some time.&#xA;Click Export to continue without updating properties." translation="单击“刷新”以更新所有特性。这可能需要一些时间。&#xA;单击“导出”以继续，而不更新特性。"/>
	<label commandName="GettingLatestPIMPropertiesOnPrint" devLabel="Click Refresh to update all properties. This may take some time.&#xA;Click Print to continue without updating properties." translation="单击“刷新”以更新所有特性。这可能需要一些时间。&#xA;单击“打印”以继续，而不更新特性。"/>
	<label commandName="GroupDestination" devLabel="Destination" translation="目标"/>
	<label commandName="GroupInput" devLabel="Group" translation="组"/>
	<label commandName="GroupReference" devLabel="Reference" translation="参考"/>
	<label commandName="HIDDEN" devLabel="HIDDEN" translation="隐藏"/>
	<label commandName="HIDDEN2" devLabel="HIDDEN2" translation="隐藏 2"/>
	<label commandName="HIDDEN_OPTION" devLabel="" translation=""/>
	<label commandName="HIDDEN_OPTION_GROUP" devLabel="" translation=""/>
	<label commandName="HOLE_TABLE_TITLE_BENDTABLE" devLabel="Bend Table" translation="折弯表"/>
	<label commandName="HOLE_TABLE_TITLE_CONFIGTABLE" devLabel="Configuration Table" translation="配置表"/>
	<label commandName="HOLE_TABLE_TITLE_CUSTOMTABLE" devLabel="Custom Table" translation="自定义表"/>
	<label commandName="HOLE_TABLE_TITLE_HOLETABLE" devLabel="Hole Table" translation="孔表"/>
	<label commandName="HOLE_TABLE_TITLE_LINKTABLE" devLabel="Link Table" translation="链接表"/>
	<label commandName="HOLE_TABLE_TITLE_PARTLIST" devLabel="Part List" translation="明细表"/>
	<label commandName="HOLE_TABLE_TITLE_REVISIONHISTORY" devLabel="Revision History" translation="修订历史"/>
	<label commandName="HPDimension" devLabel="Dimension" translation="标注"/>
	<label commandName="HPDimensionDesc" devLabel="Displays hole detail as diameter dimension." translation="显示孔详细信息作为直径尺寸标注。"/>
	<label commandName="HPHoleAndThreadNote" devLabel="Hole and Thread Note" translation="孔和螺纹注释"/>
	<label commandName="HPHoleAndThreadNoteDesc" devLabel="Displays hole specifications as a detailed note with hole and thread." translation="显示孔规格作为孔和螺纹的详细注释。"/>
	<label commandName="HatchColorButton" devLabel="Select Color" translation="选择颜色"/>
	<label commandName="HatchColorInput" devLabel="Color" translation="颜色"/>
	<label commandName="HatchDesc" devLabel="Shows the Hatch Object Properties" translation="显示图案填充对象特性"/>
	<label commandName="HatchEditPropertiesAngle" devLabel="Angle" translation="角度"/>
	<label commandName="HatchEditPropertiesColor" devLabel="Color" translation="颜色"/>
	<label commandName="HatchEditPropertiesPattern" devLabel="Pattern" translation="阵列"/>
	<label commandName="HatchEditPropertiesScale" devLabel="Scale Factor" translation="比例系数"/>
	<label commandName="HatchToolTip" devLabel="Hatch" translation="图案填充"/>
	<label commandName="Help_Btn" devLabel="HelpButton" translation="帮助按钮"/>
	<label commandName="HiddenLinesColorButton" devLabel="Select Color" translation="选择颜色"/>
	<label commandName="HiddenLinesColorInput" devLabel="Color" translation="颜色"/>
	<label commandName="HiddenLinesNarrowColorButton" devLabel="Select Color" translation="选择颜色"/>
	<label commandName="HiddenLinesNarrowColorInput" devLabel="Color" translation="颜色"/>
	<label commandName="Hole and Thread Note" devLabel="Hole and Thread Note" translation="孔和螺纹注释"/>
	<label commandName="Hole&amp;ThreadNoteTip" devLabel="Creates a hole and or thread note for the hole or thread edge." translation="为孔或螺纹边创建孔和/或螺纹注释。"/>
	<label commandName="HoleAndThreadNoteGeneratorAlgo" devLabel="Hole And Thread Note Generator Algorithm" translation="孔和螺纹注释生成器算法"/>
	<label commandName="HoleAndThreadNotesColorButton" devLabel="Select Color" translation="选择颜色"/>
	<label commandName="HoleAndThreadNotesColorInput" devLabel="Color" translation="颜色"/>
	<label commandName="HoleIdColorButton" devLabel="Select Color" translation="选择颜色"/>
	<label commandName="HoleIdColorInput" devLabel="Color" translation="颜色"/>
	<label commandName="HoleTableColorButton" devLabel="Select Color" translation="选择颜色"/>
	<label commandName="HoleTableColorInput" devLabel="Color" translation="颜色"/>
	<label commandName="HoleTableOriginColorButton" devLabel="Select Color" translation="选择颜色"/>
	<label commandName="HoleTableOriginColorInput" devLabel="Color" translation="颜色"/>
	<label commandName="HoleTableTip" devLabel="Creates a hole table." translation="创建孔表。"/>
	<label commandName="HorizontalBaseLineDimGenAlgorithm" devLabel="Horizontal Base Line Dim Algorithm" translation="水平基线标注算法"/>
	<label commandName="HorizontalChainDimGenAlgorithm" devLabel="Horizontal Chain Dim Algorithm" translation="水平链标注算法"/>
	<label commandName="ImageDistX" devLabel="X Distance" translation="X 距离"/>
	<label commandName="ImageDistY" devLabel="Y Distance" translation="Y 距离"/>
	<label commandName="ImageRotate" devLabel="Rotation Angle" translation="旋转角度"/>
	<label commandName="ImageScale" devLabel="Scale" translation="缩放"/>
	<label commandName="ImageSelect" devLabel="Image" translation="图像"/>
	<label commandName="ImportSymbol" devLabel="Import" translation="导入"/>
	<label commandName="ImportSymbolLabel" devLabel="There are no sketch symbols yet. &#xA; Click 'Manage Symbols' to &#xA;create or import symbols" translation="目前还没有草图符号。&#xA;单击“管理符号”以&#xA;创建或导入符号"/>
	<label commandName="ImproveViewQuality" devLabel="Improve View Quality" translation="提高视图质量"/>
	<label commandName="ImproveViewQualityToolTip" devLabel="Improves the render of shaded views, may affect performance." translation="改进着色视图的渲染，可能会影响性能。"/>
	<label commandName="InfoAttributeType" devLabel="Attribute" translation="属性"/>
	<label commandName="InfoCustomSketchType" devLabel="Type" translation="类型"/>
	<label commandName="InputAutoCMP" devLabel="Auto-complete" translation="自动完成"/>
	<label commandName="InputCenterMark" devLabel="Center Mark" translation="中心标记"/>
	<label commandName="InputFullPCD" devLabel="Full PCD" translation="完整 PCD"/>
	<label commandName="InputIsLineweights" devLabel="Lineweights" translation="线宽"/>
	<label commandName="InputIsOpenPDF" devLabel="Open PDF" translation="打开 PDF"/>
	<label commandName="InputOperation" devLabel="Operation" translation="操作"/>
	<label commandName="InputRange" devLabel="Range" translation="范围"/>
	<label commandName="InputSheets" devLabel="Sheets" translation="图纸"/>
	<label commandName="InsertProperty" devLabel="Insert Property" translation="插入特性"/>
	<label commandName="InsertSymbols" devLabel="Symbols" translation="符号"/>
	<label commandName="Integral" devLabel=" Integral" translation=" 整体"/>
	<label commandName="InterLoopDimGeneratorAlgo" devLabel="InterLoop Dim Generator Algorithm" translation="回路间标注生成器算法"/>
	<label commandName="InterViewDimensionFungibleAlgorithm" devLabel="Inter View Dimension Fungible Algorithm" translation="视图间标注可替代算法"/>
	<label commandName="InterferenceEdges" devLabel="Interference Edges" translation="干涉边"/>
	<label commandName="InterferenceEdgesDesc" devLabel="Displays edges where components intersect." translation="显示零部件相交处的边。"/>
	<label commandName="InvalidCharacters" devLabel="These characters \&lt;&gt;/?&quot;:;*|,=`$^ are not allowed." translation="不允许使用以下字符: \&lt;&gt;/?&quot;:;*|,=`$^。"/>
	<label commandName="InvalidLimit" devLabel="Maximum 30 characters allowed as custom sketch name." translation="自定义草图名称最多允许包含 30 个字符。"/>
	<label commandName="InvalidNumericValue" devLabel="Please enter a numeric value." translation="请输入数字值。"/>
	<label commandName="InvalidRange" devLabel="Out of Range" translation="超出范围"/>
	<label commandName="InvalidString" devLabel="Please enter a valid sketch name" translation="请输入有效的草图名称"/>
	<label commandName="InvalidUpperLowerValue" devLabel="Upper Limit value should be higher than the Lower Limit value." translation="“上限”值应高于“下限”值。"/>
	<label commandName="Isometric View Preference ASME" devLabel="Isometric View Preference 0TR 1TL 2BL 3BR" translation="等轴测视图首选项 0TR 1TL 2BL 3BR"/>
	<label commandName="Isometric View Preference ISO" devLabel="Isometric View Preference 0TR 1TL 2BL 3BR" translation="等轴测视图首选项 0TR 1TL 2BL 3BR"/>
	<label commandName="ItemAllSheets" devLabel="All Sheets" translation="所有图纸"/>
	<label commandName="ItemCurrentSheet" devLabel="Current Sheet" translation="当前图纸"/>
	<label commandName="ItemRangeSheets" devLabel="Range" translation="范围"/>
	<label commandName="ItemSelectedSheets" devLabel="Selected Sheets" translation="选定的图纸"/>
	<label commandName="JM Cancel" devLabel="Cancel" translation="取消"/>
	<label commandName="JM Cancelled" devLabel="Cancelled" translation="已取消"/>
	<label commandName="JM Complete" devLabel="Complete" translation="完成"/>
	<label commandName="JM Failed" devLabel="Failed" translation="失败"/>
	<label commandName="JM Open" devLabel="Open" translation="打开"/>
	<label commandName="JMDrawingAutomation" devLabel="Drawing Automation" translation="工程图自动化"/>
	<label commandName="JMType" devLabel="Type" translation="类型"/>
	<label commandName="JMaction" devLabel="Action" translation="操作"/>
	<label commandName="JMname" devLabel="Name" translation="名称"/>
	<label commandName="JMstatus" devLabel="Status" translation="状态"/>
	<label commandName="Justification" devLabel="Justification" translation="对齐"/>
	<label commandName="JustificationMixed" devLabel="Mixed" translation="混合"/>
	<label commandName="LAYER_STACK_TABLE_TITLE" devLabel="Layer Stack" translation="层叠"/>
	<label commandName="LINETYPE_PROP" devLabel="Linetype" translation="线型"/>
	<label commandName="LINEWIDTH_PROP" devLabel="Line Width" translation="线宽"/>
	<label commandName="LINE_COLOR_CMD_ACTION" devLabel="Color" translation="颜色"/>
	<label commandName="LINE_COLOR_EDIT_CMD" devLabel="Color" translation="颜色"/>
	<label commandName="LabelAlphaTooltip" devLabel="Adds numeric auto-counter label starting with 1." translation="添加从 1 开始的数字自动计数器标签。"/>
	<label commandName="LabelCustomTooltip" devLabel="Adds custom text." translation="添加自定义文本。"/>
	<label commandName="LabelNumberingAlpha" devLabel="Alpha" translation="字母"/>
	<label commandName="LabelNumberingAlphaASME" devLabel="" translation=""/>
	<label commandName="LabelNumberingAlphaISO" devLabel="" translation=""/>
	<label commandName="LabelNumberingCustom" devLabel="Custom" translation="自定义"/>
	<label commandName="LabelNumberingCustomASME" devLabel="" translation=""/>
	<label commandName="LabelNumberingCustomISO" devLabel="" translation=""/>
	<label commandName="LabelNumberingNumeric" devLabel="Numeric" translation="数字"/>
	<label commandName="LabelNumberingNumericASME" devLabel="" translation=""/>
	<label commandName="LabelNumberingNumericISO" devLabel="" translation=""/>
	<label commandName="LabelNumericTooltip" devLabel="Adds alphabetic auto-counter label starting with A." translation="添加从 A 开始的字母自动计数器标签。"/>
	<label commandName="LastLevel" devLabel="Last Level" translation="上一级"/>
	<label commandName="LatestMilestoneLabelStr" devLabel=" (latest milestone)" translation=" (最新里程碑)"/>
	<label commandName="LatestVersionLabelStr" devLabel=" (latest version)" translation=" (最新版本)"/>
	<label commandName="LayerStackTableCmd" devLabel="Layer Stack Table" translation="层叠表"/>
	<label commandName="LayerStackTableTip" devLabel="Creates layer stack table." translation="创建层叠表。"/>
	<label commandName="LayerStackViewNewDescription1" devLabel="Layer Stack View is not available when there is no linked Electronics Design." translation="没有链接的电子器件设计时，层叠视图不可用。"/>
	<label commandName="LayerStackViewNewDescription2" devLabel="To use electronics data in a drawing, first link the 3D PCB to an Electronics Design, then create a drawing." translation="若要在图形中使用电子器件数据，请先将三维 PCB 链接到电子器件设计，然后再创建图形。"/>
	<label commandName="LayerStackViewSuffix" devLabel=" (unavailable)" translation=" (不可用)"/>
	<label commandName="Leader Note" devLabel="Leader Note" translation="引线注释"/>
	<label commandName="LeaderAttachment" devLabel="Leader Attachment" translation="引线附着"/>
	<label commandName="LeaderNotesColorButton" devLabel="Select Color" translation="选择颜色"/>
	<label commandName="LeaderNotesColorInput" devLabel="Color" translation="颜色"/>
	<label commandName="LeaderSelectButton" devLabel="Select" translation="选择"/>
	<label commandName="LeaderTypeCenter" devLabel="Center" translation="中心"/>
	<label commandName="LeaderTypeDefault" devLabel="Default" translation="默认"/>
	<label commandName="Left" devLabel="Left" translation="左"/>
	<label commandName="Lettering" devLabel="Lettering" translation="字母"/>
	<label commandName="LimitLower" devLabel="Limit" translation="限制"/>
	<label commandName="LimitUpper" devLabel="Limit" translation="限制"/>
	<label commandName="LineColor" devLabel="Select Color" translation="选择颜色"/>
	<label commandName="LineTypeCenter" devLabel="Center" translation="中心"/>
	<label commandName="LineTypeCenter2" devLabel="Center2" translation="中心 2"/>
	<label commandName="LineTypeContinuous" devLabel="Continuous" translation="连续"/>
	<label commandName="LineTypeHidden" devLabel="Hidden" translation="隐藏线"/>
	<label commandName="LineTypeHidden2" devLabel="Hidden2" translation="隐藏线 2"/>
	<label commandName="LineTypePhantom2" devLabel="Phantom2" translation="虚线 2"/>
	<label commandName="LineTypeScale" devLabel="Line Type Scale" translation="线型比例"/>
	<label commandName="LineWeight_0.0" devLabel="0.0mm" translation="0.0mm"/>
	<label commandName="LineWeight_0.18" devLabel="0.18mm" translation="0.18mm"/>
	<label commandName="LineWeight_0.25" devLabel="0.25mm" translation="0.25mm"/>
	<label commandName="LineWeight_0.3" devLabel="0.3mm" translation="0.3mm"/>
	<label commandName="LineWeight_0.35" devLabel="0.35mm" translation="0.35mm"/>
	<label commandName="LineWeight_0.5" devLabel="0.5mm" translation="0.5mm"/>
	<label commandName="LineWeight_0.6" devLabel="0.6mm" translation="0.6mm"/>
	<label commandName="LineWeight_0.7" devLabel="0.7mm" translation="0.7mm"/>
	<label commandName="LineWeight_0.8" devLabel="0.8mm" translation="0.8mm"/>
	<label commandName="LineWeight_1.0" devLabel="1.0mm" translation="1.0mm"/>
	<label commandName="LineWeight_1.4" devLabel="1.4mm" translation="1.4mm"/>
	<label commandName="LineWeight_1.58" devLabel="1.58mm" translation="1.58mm"/>
	<label commandName="LineWeight_2.0" devLabel="2.0mm" translation="2.0mm"/>
	<label commandName="LineWidth_Custom" devLabel="Custom" translation="自定义"/>
	<label commandName="LinearUnitFormat0" devLabel="Decimal" translation="小数"/>
	<label commandName="LinearUnitFormat1" devLabel="Fractional" translation="分数"/>
	<label commandName="LinearUnitFormat2" devLabel="Engineering" translation="工程"/>
	<label commandName="LinearUnitFormat3" devLabel="Architectural" translation="建筑"/>
	<label commandName="LinkTableTip" devLabel="Creates a link table for the selected external source file." translation="为选定的外部源文件创建链接表。"/>
	<label commandName="LoopSymmetryGeneratorAlgorithm" devLabel="Loop Symmetry Generator Algorithm" translation="回路对称生成器算法"/>
	<label commandName="LowerLimit" devLabel="Lower Limit" translation="下限"/>
	<label commandName="MDGoTo" devLabel="Show in Location" translation="在位置中显示"/>
	<label commandName="MainASMGroup" devLabel="Main Assembly" translation="主部件"/>
	<label commandName="MainASMISOGroup" devLabel="Main Assembly ISO" translation="主部件 ISO"/>
	<label commandName="MainASMOrthoGroup" devLabel="Main Assembly Ortho" translation="主部件正交"/>
	<label commandName="MainASMSheetCreate" devLabel="Create Main Assembly" translation="创建主部件"/>
	<label commandName="MainAsmISOPartList" devLabel="Include Parts List" translation="包括明细表"/>
	<label commandName="MainAsmOrthoPartList" devLabel="Include Parts List" translation="包括明细表"/>
	<label commandName="MainAsmOrthoPartListLocation" devLabel="Default Parts List Location" translation="默认明细表位置"/>
	<label commandName="MainAsmSheetOrthoViesw" devLabel="Sheet with Ortho Views" translation="带正交视图的图纸"/>
	<label commandName="MainAsmSheetPartListLocation" devLabel="Default Parts List Location" translation="默认明细表位置"/>
	<label commandName="MainAsmSheetSingleISOView" devLabel="Sheet with Single ISO View" translation="带单个 ISO 视图的图纸"/>
	<label commandName="MainDashboard" devLabel="Data Panel" translation="数据面板"/>
	<label commandName="MajoritySymbolFullType" devLabel="Full List" translation="完整列表"/>
	<label commandName="MajoritySymbolSimplifiedType" devLabel="Simplified List" translation="简化列表"/>
	<label commandName="MajoritySymbolTypeInput" devLabel="Majority Symbol Types" translation="多数符号类型"/>
	<label commandName="ManageExtRefreshCmd" devLabel="Refresh" translation="刷新"/>
	<label commandName="ManageSymbols" devLabel="Manage Symbols" translation="管理符号"/>
	<label commandName="Manual" devLabel="Manual" translation="手动"/>
	<label commandName="MassPrecisionInput" devLabel="Mass precision" translation="质量精度"/>
	<label commandName="MassPropertyInputUnits" devLabel="Units" translation="单位"/>
	<label commandName="MassUnitInput" devLabel="Mass" translation="质量"/>
	<label commandName="MaterializedBom" devLabel="Bill of Materials" translation="BOM 表"/>
	<label commandName="MaxBodiesToDimension" devLabel="Max Bodies To Dimension" translation="要标注的最大实体数"/>
	<label commandName="MaxNumberOfDims" devLabel="Max Number of Dimensions" translation="最大标注数"/>
	<label commandName="Medium" devLabel="Medium" translation="中等"/>
	<label commandName="Medium_Linewidth" devLabel="(Medium)" translation="(中等)"/>
	<label commandName="MilestoneButCanUpdateStr" devLabel="Drawing is up to date; it's referencing the latest milestone of the design." translation="工程图为最新版本；它正在参考设计的最新里程碑。"/>
	<label commandName="MilestoneButCanUpdateStr_ccy" devLabel="Drawing is up to date; it's referencing the latest version of the design." translation="工程图为最新版本；它参考的是最新版本的设计。"/>
	<label commandName="MilestoneNonTipStr_ccy" devLabel="Drawing is referencing a design which has more changes past this version" translation="工程图参考的设计在此版本之后还有更多更改"/>
	<label commandName="MilestoneReferenceLabelStr" devLabel="Reference/s: " translation="参考: "/>
	<label commandName="MinLeaderLength_ASME" devLabel="Minimum Leader Length" translation="最小引线长度"/>
	<label commandName="MinLeaderLength_ISO" devLabel="Minimum Leader Length" translation="最小引线长度"/>
	<label commandName="MinMovementForArrangeAnnotation" devLabel="Minimum Movement For Arrange Annotation" translation="排列注释的最小移动"/>
	<label commandName="ModelReprensentation" devLabel="Model" translation="模型"/>
	<label commandName="ModelSketchesColorButton" devLabel="Select Color" translation="选择颜色"/>
	<label commandName="ModelSketchesColorInput" devLabel="Color" translation="颜色"/>
	<label commandName="MoveDimsWithNoCommonEdgeAndDifferentZToYellowZone" devLabel="Move Dims With No Common Edge And DifferentZ To YellowZone" translation="将没有共同边且 Z 不同的标注移至黄色区域"/>
	<label commandName="MoveRadialDimsWithSmallArcLengthAndAngleToYellowZoneAlgo" devLabel="Move Radial Dims With Small Arc Length And Angle To Yellow Zone" translation="将弧长和角度较小的径向标注移至黄色区域"/>
	<label commandName="MoveTransformPtPtTooltip" devLabel="Point to Point" translation="点到点"/>
	<label commandName="NE Isometric" devLabel="NE Isometric" translation="东北等轴测"/>
	<label commandName="NW Isometric" devLabel="NW Isometric" translation="西北等轴测"/>
	<label commandName="Name" devLabel="Name" translation="名称"/>
	<label commandName="NameColumn" devLabel="Name" translation="名称"/>
	<label commandName="Narrow" devLabel="Narrow" translation="窄"/>
	<label commandName="New Drawing Template Restricted Message" devLabel="Use templates to standardize the creation of drawings so that you can save time and ensure consistency." translation="使用模板来标准化工程图的创建过程，以便您可以节省时间并确保一致性。"/>
	<label commandName="New Drawing Template Restricted Title" devLabel="New Drawing Template" translation="新建工程图模板"/>
	<label commandName="NewDrawingDialogTitle" devLabel="CREATE DRAWING" translation="创建工程图"/>
	<label commandName="NewDrawingMenuCommand" devLabel="New Drawing" translation="新建工程图"/>
	<label commandName="NewDrawingSheetCreationAllLevel" devLabel="All Level" translation="所有级别"/>
	<label commandName="NewDrawingSheetCreationAllLevelDesc" devLabel="Creates a sheet for each design component across all levels." translation="为所有级别的每个设计零部件创建图纸。"/>
	<label commandName="NewDrawingSheetCreationFirstLevel" devLabel="First Level" translation="第一级别"/>
	<label commandName="NewDrawingSheetCreationFirstLevelDesc" devLabel="Creates sheets only for first-level components." translation="仅为第一级零部件创建图纸。"/>
	<label commandName="NewDrawingSheetCreationStructure" devLabel="Sheet Creation" translation="图纸创建"/>
	<label commandName="NewDrawingSheetCreationStructureDesc" devLabel="Controls the level of detail for drawing sheet creation." translation="控制工程图纸创建的细节级别。"/>
	<label commandName="NewDrawingTemplateDialogTitle" devLabel="Create Drawing Template" translation="创建工程图模板"/>
	<label commandName="NewECADDrawingDialogTitle" devLabel="CREATE DRAWING" translation="创建工程图"/>
	<label commandName="NewECADTableTitle" devLabel="Title" translation="标题"/>
	<label commandName="NewFusionDrawingAnnotationUnitsInput" devLabel="Units" translation="单位"/>
	<label commandName="NewFusionDrawingBaseDocumentInput" devLabel="Base Document" translation="基本文档"/>
	<label commandName="NewFusionDrawingComponentsInput" devLabel="Components" translation="零部件"/>
	<label commandName="NewFusionDrawingFormatANSIInput" devLabel="" translation=""/>
	<label commandName="NewFusionDrawingFormatISOInput" devLabel="" translation=""/>
	<label commandName="NewFusionDrawingFormatInput" devLabel="Standard" translation="标准"/>
	<label commandName="NewFusionDrawingSheetOrientationInput" devLabel="Orientation" translation="方向"/>
	<label commandName="NewFusionDrawingSheetSizeInput" devLabel="Sheet Size" translation="图纸尺寸"/>
	<label commandName="NewFusionDrawingTemplatePath" devLabel="Path" translation="路径"/>
	<label commandName="NewFusionDrawingUnitsInchesInput" devLabel="in" translation="in"/>
	<label commandName="NewFusionDrawingUnitsMillimetersInput" devLabel="mm" translation="mm"/>
	<label commandName="NewOrExistingDrawingInput" devLabel="Drawing" translation="工程图"/>
	<label commandName="NewPCBTableInput" devLabel="PCB" translation="PCB"/>
	<label commandName="NewPCBViewInput" devLabel="PCB" translation="PCB"/>
	<label commandName="NewTableHoleArrange" devLabel="Arrange" translation="排列"/>
	<label commandName="NewTableHoleArrangeByPosition" devLabel="by Position" translation="按位置"/>
	<label commandName="NewTableHoleArrangeBySize" devLabel="by Size" translation="按尺寸"/>
	<label commandName="NewTableHoleOriginStyle" devLabel="Style" translation="样式"/>
	<label commandName="NewTableHoleTitle" devLabel="Title" translation="标题"/>
	<label commandName="NewTableHoleVisible" devLabel="Visible" translation="可见"/>
	<label commandName="NewTableReferenceEmptyTable" devLabel="Empty Table" translation="空表格"/>
	<label commandName="NewTableReferenceInput" devLabel="Reference" translation="参考"/>
	<label commandName="NewTableReferenceSelectView" devLabel="Select Drawing View" translation="选择工程视图"/>
	<label commandName="NewTableTableInput" devLabel="Table" translation="表格"/>
	<label commandName="NewTableTitle" devLabel="Title" translation="标题"/>
	<label commandName="NewTableTypeInput" devLabel="Type" translation="类型"/>
	<label commandName="NewTableViewHoleOriginSelectionInput" devLabel="Origin" translation="原点"/>
	<label commandName="NewTableViewSelectionInput" devLabel="Select" translation="选择"/>
	<label commandName="No" devLabel="No" translation="否"/>
	<label commandName="NoAutomationJobsJobs" devLabel="There are no drawing automation jobs." translation="没有工程图自动化作业。"/>
	<label commandName="NoBodyOrSketchForDrawing" devLabel="The design contains neither solid bodies nor sketches. A drawing cannot be created." translation="该设计既不包含实体，也不包含草图。无法创建工程图。"/>
	<label commandName="NoCustomSketchSymbolsFound" devLabel="No Custom Sketch Symbols found" translation="未找到自定义草图符号"/>
	<label commandName="NoCustomSketchSymbolsToImport" devLabel="The selected file does not contain any custom sketch symbols.&#xA;Please choose a different file that includes at least one sketch symbol to import." translation="选定的文件不包含任何自定义草图符号。&#xA;请选择至少包含一个草图符号的其他文件以进行导入。"/>
	<label commandName="NoMeshOrTSplineWillBeIncluded" devLabel="T-Spline bodies will not be included in the drawing." translation="T-Spline 实体将不包含在工程图中。"/>
	<label commandName="NoPartsListOrTableForExportWarning" devLabel="This sheet has no table." translation="此图纸没有表格。"/>
	<label commandName="NoSymbolLabel" devLabel="There are no sketch symbols yet.&#xA; Click the add icon to create a new symbol, &#xA; or use the import icon to insert one." translation="目前还没有草图符号。&#xA;单击添加图标以创建新符号，&#xA;或者使用导入图标插入一个。"/>
	<label commandName="None" devLabel=" None" translation=" 无"/>
	<label commandName="Numbering" devLabel="Numbering" translation="编号"/>
	<label commandName="OALRefreshDrawingMessage" devLabel="Refreshes the canvas with changes that have been made elsewhere in Fusion to this drawing or its references." translation="根据在 Fusion 中的其他位置对此工程图或其参考所做的更改刷新画布。"/>
	<label commandName="OKButton" devLabel="OK" translation="确定"/>
	<label commandName="OKButtonCaption" devLabel="OK" translation="确定"/>
	<label commandName="ObjectPropertiesAllDimensionArrowheadInput" devLabel="Arrowhead" translation="箭头"/>
	<label commandName="ObjectPropertiesAllDimensionLineTypeGroupInput" devLabel="Line Type" translation="线型"/>
	<label commandName="ObjectPropertiesAllDimensionLineWeightGroup" devLabel="Line Width" translation="线宽"/>
	<label commandName="ObjectPropertiesBalloonsArrowheadInput" devLabel="Arrowhead" translation="箭头"/>
	<label commandName="ObjectPropertiesBalloonsLineWeightInput" devLabel="Line Width" translation="线宽"/>
	<label commandName="ObjectPropertiesBendCenterLineTypeInput" devLabel="Line Type" translation="线型"/>
	<label commandName="ObjectPropertiesBendCenterLineWeightInput" devLabel="Line Width" translation="线宽"/>
	<label commandName="ObjectPropertiesBendIdArrowheadInput" devLabel="Arrowhead" translation="箭头"/>
	<label commandName="ObjectPropertiesBendNoteArrowheadInput" devLabel="Arrowhead" translation="箭头"/>
	<label commandName="ObjectPropertiesBendNotesLineWeightGroup" devLabel="Line Width" translation="线宽"/>
	<label commandName="ObjectPropertiesBendTableLineWeightInput" devLabel="Line Width" translation="线宽"/>
	<label commandName="ObjectPropertiesBrokenViewBreaksLineWeightInput" devLabel="Line Width" translation="线宽"/>
	<label commandName="ObjectPropertiesCenterLinesLineTypeInput" devLabel="Line Type" translation="线型"/>
	<label commandName="ObjectPropertiesCenterLinesLineWeightInput" devLabel="Line Width" translation="线宽"/>
	<label commandName="ObjectPropertiesConfigTableLineWeightInput" devLabel="Line Width" translation="线宽"/>
	<label commandName="ObjectPropertiesCropViewOutlineTypeInput" devLabel="Type" translation="类型"/>
	<label commandName="ObjectPropertiesCropViewOutlineWeightInput" devLabel="Line Width" translation="线宽"/>
	<label commandName="ObjectPropertiesCustomTablesLineWeightInput" devLabel="Line Width" translation="线宽"/>
	<label commandName="ObjectPropertiesDetailBoundariesLineTypeInput" devLabel="Line Type" translation="线型"/>
	<label commandName="ObjectPropertiesDetailBoundariesLineWeightInput" devLabel="Line Width" translation="线宽"/>
	<label commandName="ObjectPropertiesEdgeExtensionLineTypeInput" devLabel="Line Type" translation="线型"/>
	<label commandName="ObjectPropertiesEdgeExtensionLineWeightGroup" devLabel="Line Width" translation="线宽"/>
	<label commandName="ObjectPropertiesGroupDimensions" devLabel="Dimensions" translation="尺寸"/>
	<label commandName="ObjectPropertiesGroupGeneral" devLabel="General" translation="常规"/>
	<label commandName="ObjectPropertiesGroupHatch" devLabel="Hatch" translation="图案填充"/>
	<label commandName="ObjectPropertiesGroupLabels" devLabel="Labels" translation="标签"/>
	<label commandName="ObjectPropertiesGroupMoreOptions" devLabel="More Options" translation="更多选项"/>
	<label commandName="ObjectPropertiesGroupNotes" devLabel="Notes" translation="注释"/>
	<label commandName="ObjectPropertiesGroupSketches" devLabel="Sketches" translation="草图"/>
	<label commandName="ObjectPropertiesHatchLineWeightInput" devLabel="Line Width" translation="线宽"/>
	<label commandName="ObjectPropertiesHiddenLinesLineTypeInput" devLabel="Line Type" translation="线型"/>
	<label commandName="ObjectPropertiesHiddenLinesLineWeightInput" devLabel="Line Width" translation="线宽"/>
	<label commandName="ObjectPropertiesHiddenLinesNarrowLineTypeInput" devLabel="Line Type" translation="线型"/>
	<label commandName="ObjectPropertiesHiddenLinesNarrowLineWeightInput" devLabel="Line Width" translation="线宽"/>
	<label commandName="ObjectPropertiesHoleAndThreadNoteArrowheadInput" devLabel="Arrowhead" translation="箭头"/>
	<label commandName="ObjectPropertiesHoleAndThreadNotesLineWeightGroup" devLabel="Line Width" translation="线宽"/>
	<label commandName="ObjectPropertiesHoleIdArrowheadInput" devLabel="Arrowhead" translation="箭头"/>
	<label commandName="ObjectPropertiesHoleTableLineWeightInput" devLabel="Line Width" translation="线宽"/>
	<label commandName="ObjectPropertiesHoleTableOriginLineWeightInput" devLabel="Line Width" translation="线宽"/>
	<label commandName="ObjectPropertiesLeaderNoteArrowheadInput" devLabel="Arrowhead" translation="箭头"/>
	<label commandName="ObjectPropertiesLeaderNotesLineWeightGroup" devLabel="Line Width" translation="线宽"/>
	<label commandName="ObjectPropertiesModelSketchesLineTypeInput" devLabel="Line Type" translation="线型"/>
	<label commandName="ObjectPropertiesModelSketchesLineWeightInput" devLabel="Line Width" translation="线宽"/>
	<label commandName="ObjectPropertiesPartsListLineWeightInput" devLabel="Line Width" translation="线宽"/>
	<label commandName="ObjectPropertiesRevisionCloudLineTypeInput" devLabel="Line Type" translation="线型"/>
	<label commandName="ObjectPropertiesRevisionCloudLineWeightInput" devLabel="Line Width" translation="线宽"/>
	<label commandName="ObjectPropertiesRevisionHistoryTableLineWeightInput" devLabel="Line Width" translation="线宽"/>
	<label commandName="ObjectPropertiesRevisionMarkerArrowheadInput" devLabel="Arrowhead" translation="箭头"/>
	<label commandName="ObjectPropertiesRevisionMarkerLineWeightInput" devLabel="Line Width" translation="线宽"/>
	<label commandName="ObjectPropertiesSectionLinesLineTypeInput" devLabel="Line Type" translation="线型"/>
	<label commandName="ObjectPropertiesSectionLinesLineWeightInput" devLabel="Line Width" translation="线宽"/>
	<label commandName="ObjectPropertiesSubgroupAllDimensions" devLabel="All Dimensions" translation="所有尺寸"/>
	<label commandName="ObjectPropertiesSubgroupBalloons" devLabel="Balloons" translation="引出序号"/>
	<label commandName="ObjectPropertiesSubgroupBendCenters" devLabel="Bend Centers" translation="折弯中心"/>
	<label commandName="ObjectPropertiesSubgroupBendId" devLabel="Bend IDs" translation="折弯 ID"/>
	<label commandName="ObjectPropertiesSubgroupBendNotes" devLabel="Bend Notes" translation="折弯注释"/>
	<label commandName="ObjectPropertiesSubgroupBendTable" devLabel="Bend Table" translation="折弯表"/>
	<label commandName="ObjectPropertiesSubgroupBrokenViewBreaks" devLabel="Broken View Breaks" translation="打断的视图打断"/>
	<label commandName="ObjectPropertiesSubgroupCenterLinesAndMarks" devLabel="Center Lines and Marks" translation="中心线和标记"/>
	<label commandName="ObjectPropertiesSubgroupConfigTable" devLabel="Configuration Table" translation="配置表"/>
	<label commandName="ObjectPropertiesSubgroupCropViewOutline" devLabel="Crop View Outline" translation="裁剪视图轮廓"/>
	<label commandName="ObjectPropertiesSubgroupCustomTables" devLabel="Custom Tables" translation="自定义表"/>
	<label commandName="ObjectPropertiesSubgroupDetailBoundaries" devLabel="Detail Boundaries" translation="详图边界"/>
	<label commandName="ObjectPropertiesSubgroupEdgeExtensions" devLabel="Edge Extensions" translation="边延伸"/>
	<label commandName="ObjectPropertiesSubgroupHiddenLines" devLabel="Hidden Lines" translation="隐藏线"/>
	<label commandName="ObjectPropertiesSubgroupHiddenLinesNarrow" devLabel="Hidden Lines (narrow)" translation="隐藏线(窄形)"/>
	<label commandName="ObjectPropertiesSubgroupHoleAndThreadNotes" devLabel="Hole and Thread Notes" translation="孔和螺纹注释"/>
	<label commandName="ObjectPropertiesSubgroupHoleId" devLabel="Hole IDs" translation="孔 ID"/>
	<label commandName="ObjectPropertiesSubgroupHoleTable" devLabel="Hole Table" translation="孔表"/>
	<label commandName="ObjectPropertiesSubgroupHoleTableOrigin" devLabel="Hole Table Origin" translation="孔表原点"/>
	<label commandName="ObjectPropertiesSubgroupLeaderNotes" devLabel="Leader Notes" translation="引线注释"/>
	<label commandName="ObjectPropertiesSubgroupModelSketches" devLabel="Model Sketches" translation="模型草图"/>
	<label commandName="ObjectPropertiesSubgroupPartsList" devLabel="Parts List" translation="明细表"/>
	<label commandName="ObjectPropertiesSubgroupRevisionCloud" devLabel="Revision Cloud" translation="修订云线"/>
	<label commandName="ObjectPropertiesSubgroupRevisionHistoryTable" devLabel="Revision History Table" translation="修订历史表"/>
	<label commandName="ObjectPropertiesSubgroupRevisionMarker" devLabel="Revision Marker" translation="修订标记"/>
	<label commandName="ObjectPropertiesSubgroupSectionLines" devLabel="Section Lines" translation="剖切线"/>
	<label commandName="ObjectPropertiesSubgroupSymbols" devLabel="Symbols" translation="符号"/>
	<label commandName="ObjectPropertiesSubgroupTangentEdges" devLabel="Tangent Edges" translation="相切边"/>
	<label commandName="ObjectPropertiesSubgroupTweakTrails" devLabel="Tweak Trails" translation="调整轨迹"/>
	<label commandName="ObjectPropertiesSubgroupViewLabel" devLabel="View Label" translation="视图标签"/>
	<label commandName="ObjectPropertiesSubgroupVisibleOuterLines" devLabel="Visible Outer Lines" translation="可见外部线"/>
	<label commandName="ObjectPropertiesSymbolsLineWeightInput" devLabel="Line Width" translation="线宽"/>
	<label commandName="ObjectPropertiesTangentEdgesLineTypeInput" devLabel="Line Type" translation="线型"/>
	<label commandName="ObjectPropertiesTangentEdgesLineWeightInput" devLabel="Line Width" translation="线宽"/>
	<label commandName="ObjectPropertiesTweakTrailsLineTypeInput" devLabel="Line Type" translation="线型"/>
	<label commandName="ObjectPropertiesTweakTrailsLineWeightInput" devLabel="Line Width" translation="线宽"/>
	<label commandName="ObjectPropertiesVisibleOutlinesLineTypeInput" devLabel="Line Type" translation="线型"/>
	<label commandName="ObjectPropertiesVisibleOutlinesLineWeightInput" devLabel="Line Width" translation="线宽"/>
	<label commandName="Oblique" devLabel=" Oblique" translation=" 斜角"/>
	<label commandName="Off" devLabel="Off" translation="关闭"/>
	<label commandName="OfflineFusionDrawingItem" devLabel="New Offline Drawing Item" translation="新建脱机工程图项"/>
	<label commandName="OffsetDistance" devLabel="Distance" translation="距离"/>
	<label commandName="Ok" devLabel="OK" translation="确定"/>
	<label commandName="On" devLabel="On" translation="打开"/>
	<label commandName="Open" devLabel=" Open" translation=" 开口"/>
	<label commandName="Open30" devLabel=" Open 30" translation=" 30 度开口"/>
	<label commandName="Open90" devLabel=" Right Angle" translation=" 直角"/>
	<label commandName="OpenAutoDrawing" devLabel="Open Drawing After Generation" translation="生成后打开工程图"/>
	<label commandName="OpenRateLimitedMsg" devLabel="Unable to complete operation due to heavy system load. Please try again in a few minutes." translation="系统负载过重，无法完成操作。请稍后重试。"/>
	<label commandName="OpenRateLimitedTitle" devLabel="Unable to complete operation" translation="无法完成操作"/>
	<label commandName="OpenRelatedDesignCommand" devLabel="Open" translation="打开"/>
	<label commandName="Options" devLabel="Options" translation="选项"/>
	<label commandName="OrdinateDimGenAlgorithm" devLabel="Ordinate Dim Generator Algorithm" translation="坐标标注生成器算法"/>
	<label commandName="OrdinateRecipeTitle" devLabel="Ordinate Dimensions" translation="坐标标注"/>
	<label commandName="Orientation" devLabel="Orientation" translation="方向"/>
	<label commandName="Origin" devLabel=" Origin Indicator" translation=" 原点指示器"/>
	<label commandName="Origin Block" devLabel="Origin Block" translation="原始块"/>
	<label commandName="Origin2" devLabel=" Origin Indicator 2" translation=" 原点指示器 2"/>
	<label commandName="OriginSettings" devLabel="Origin Settings" translation="原点设置"/>
	<label commandName="OriginStyleALTERNATE" devLabel="Alternate Origin" translation="替换原点"/>
	<label commandName="OriginStyleALTERNATEDescription" devLabel="Identifies the X0, Y0 location for hole tables or ordinate dimensions" translation="标识孔表或坐标标注的 X0, Y0 位置"/>
	<label commandName="OriginStyleALTERNATETitle" devLabel="Alternate Origin" translation="替换原点"/>
	<label commandName="OriginStyleASME" devLabel="ASME Origin" translation="ASME 原点"/>
	<label commandName="OriginStyleASMEDescription" devLabel="Identifies the X0, Y0 location for ASME hole tables or ordinate dimensions" translation="标识 ASME 孔表或坐标标注的 X0, Y0 位置"/>
	<label commandName="OriginStyleASMETitle" devLabel="ASME Origin" translation="ASME 原点"/>
	<label commandName="OriginStyleDatumTarget" devLabel="Datum Target" translation="基准目标符号"/>
	<label commandName="OriginStyleDatumTargetDescription" devLabel="Identifies the X0, Y0 location for hole tables or ordinate dimensions" translation="标识孔表或坐标标注的 X0, Y0 位置"/>
	<label commandName="OriginStyleDatumTargetTitle" devLabel="Datum Target" translation="基准目标符号"/>
	<label commandName="OriginStyleISO" devLabel="ISO Origin" translation="ISO 原点"/>
	<label commandName="OriginStyleISODescription" devLabel="Identifies the X0, Y0 location for ISO hole tables or ordinate dimensions" translation="标识 ISO 孔表或坐标标注的 X0, Y0 位置"/>
	<label commandName="OriginStyleISOTitle" devLabel="ISO Origin" translation="ISO 原点"/>
	<label commandName="OtherSideDesc" devLabel="Show other side properties" translation="显示其他侧特性"/>
	<label commandName="OtherSideToolTip" devLabel="Other Side" translation="其他侧"/>
	<label commandName="OutOfDateContent" devLabel="Out of date content" translation="过期内容"/>
	<label commandName="OutlineTypeJagged" devLabel="Jagged" translation="锯齿状"/>
	<label commandName="OutlineTypeStraight" devLabel="Straight" translation="直线"/>
	<label commandName="OutputDrawingTemplateCaption" devLabel="Output Template" translation="输出模板"/>
	<label commandName="OutputDrawingTemplateFilter" devLabel="Drawing Template Files (*.f2t)" translation="工程图模板文件(*.f2t)"/>
	<label commandName="OverallDimsGeneratorAlgo" devLabel="Overall Dim Generator Algorithm" translation="整体标注生成器算法"/>
	<label commandName="OverallRecipeTitle" devLabel="Overall Dimensions" translation="整体标注"/>
	<label commandName="Overwrite" devLabel="Overwrite" translation="覆盖"/>
	<label commandName="PCBReprensentation" devLabel="PCB" translation="PCB"/>
	<label commandName="PHANTOM2" devLabel="PHANTOM2" translation="虚线 2"/>
	<label commandName="PIMDrawingGroup" devLabel="Drawing" translation="工程图"/>
	<label commandName="PLM360DownloadFilePathEmpty" devLabel="Cannot insert this file." translation="无法插入该文件。"/>
	<label commandName="PaddAsPerAnnotations" devLabel="Padd As Per Annotations" translation="按注释填充"/>
	<label commandName="PaddAsPerDetails" devLabel="Padd As Per Details" translation="按详细信息填充"/>
	<label commandName="PaperOrientation_Landscape" devLabel="Landscape" translation="横向"/>
	<label commandName="PaperOrientation_Portrait" devLabel="Portrait" translation="纵向"/>
	<label commandName="PartListLoc1" devLabel="Bottom Left" translation="左下"/>
	<label commandName="PartListLoc2" devLabel="Bottom Right" translation="右下"/>
	<label commandName="PartListLoc3" devLabel="Top Left" translation="左上"/>
	<label commandName="PartListLoc4" devLabel="Top Right" translation="右上"/>
	<label commandName="PartialArcDimension" devLabel="Partial" translation="部分"/>
	<label commandName="PartsListAllLevelInput" devLabel="All Level" translation="所有级别"/>
	<label commandName="PartsListAutoBalloonInput" devLabel="Auto Balloon" translation="自动引出序号"/>
	<label commandName="PartsListColorButton" devLabel="Select Color" translation="选择颜色"/>
	<label commandName="PartsListColorInput" devLabel="Color" translation="颜色"/>
	<label commandName="PartsListDefaults" devLabel="Parts List Defaults" translation="明细表默认值"/>
	<label commandName="PartsListEditAutoBalloonInput" devLabel="Auto Balloon" translation="自动引出序号"/>
	<label commandName="PartsListFirstLevelInput" devLabel="First Level" translation="第一级别"/>
	<label commandName="PartsListStructureInput" devLabel="Structure" translation="结构"/>
	<label commandName="PartsListTip" devLabel="Creates a parts list for the selected assembly, storyboard, component or sheet metal reference." translation="为选定的部件、故事板、零部件或钣金参考创建明细表。"/>
	<label commandName="Patent" devLabel="Patent" translation="曲线"/>
	<label commandName="PreferHZ" devLabel="Prefer Horizontal" translation="首选水平"/>
	<label commandName="PrintDialog_Commit" devLabel="Print" translation="打印"/>
	<label commandName="PrintDialog_EmptyPrinterList" devLabel="The printer list is not available." translation="打印机列表不可用。"/>
	<label commandName="PrintDialog_Offset" devLabel="Offset" translation="偏移"/>
	<label commandName="PrintDialog_PreviewNextButton" devLabel="Next" translation="下一个"/>
	<label commandName="PrintDialog_PreviewPreviousButton" devLabel="Previous" translation="上一个"/>
	<label commandName="PrintDialog_PrinteRange" devLabel="Print Range" translation="打印范围"/>
	<label commandName="PrintDialog_Printer" devLabel="Printer Name" translation="打印机名称"/>
	<label commandName="PrintDialog_PrinterSetup" devLabel="Printer Setup" translation="打印机设置"/>
	<label commandName="PrintDialog_PrinterUnavailable" devLabel="The selected printer is no longer available. Please select an available printer." translation="选定的打印机不再可用。请选择可用的打印机。"/>
	<label commandName="PrintDialog_PropertiesButton" devLabel="Properties" translation="特性"/>
	<label commandName="PrintDialog_Range_AllSheets" devLabel="All Sheets" translation="所有图纸"/>
	<label commandName="PrintDialog_Range_CurrentSheet" devLabel="Current Sheet" translation="当前图纸"/>
	<label commandName="PrintDialog_Range_SheetsInRange" devLabel="Sheets in Range:" translation="图纸范围:"/>
	<label commandName="PrintDialog_Scale" devLabel="Scale" translation="缩放"/>
	<label commandName="PrintDialog_Setting" devLabel="Settings" translation="设置"/>
	<label commandName="PrintDialog_Title" devLabel="Print" translation="打印"/>
	<label commandName="PrintScale_FitToPaper" devLabel="Fit to paper" translation="布满图纸"/>
	<label commandName="PrintToFileExistingFilesWarning" devLabel="%1% already exist.&#xA;&#xA;What would you like to do?" translation="%1% 已存在。&#xA;&#xA;您要执行什么操作？"/>
	<label commandName="PrintToFileExistingFilesWarning2" devLabel="%1% already exists.&#xA;&#xA;What would you like to do?" translation="%1% 已存在。&#xA;&#xA;您要执行什么操作？"/>
	<label commandName="PrintToFileFilesInUseWarning" devLabel="%1% cannot be replaced because they are in use." translation="%1% 无法替换，因为它们正在使用中。"/>
	<label commandName="PrintToFileFilesInUseWarning2" devLabel="%1% cannot be replaced because it is in use." translation="%1% 无法替换，因为它正在使用中。"/>
	<label commandName="PrintToFileList1" devLabel="and another %1% files" translation="和另外 %1% 个文件"/>
	<label commandName="PrintToFileList2" devLabel="and another %1% file" translation="和另外 %1% 个文件"/>
	<label commandName="PrinterList_Printer" devLabel="Printer Name" translation="打印机名称"/>
	<label commandName="Process" devLabel="Process" translation="焊接方法"/>
	<label commandName="Process1" devLabel="1st Process" translation="第 1 种焊接法"/>
	<label commandName="Process2" devLabel="2nd Process" translation="第 2 种焊接法"/>
	<label commandName="ProgressInfoTextGenerating" devLabel="Generating..." translation="正在生成..."/>
	<label commandName="ProjecteAnd3dLengthCheckAlgorithm" devLabel="Projected And 3d Length Check Algorithm" translation="投影和三维长度检查算法"/>
	<label commandName="Properties" devLabel="Properties" translation="特性"/>
	<label commandName="PropertiesGroup" devLabel="Properties" translation="特性"/>
	<label commandName="PropertiesSection" devLabel="Properties" translation="特性"/>
	<label commandName="PropertyAddTooltip" devLabel="Insert Property" translation="插入特性"/>
	<label commandName="PropertyColorInput" devLabel="Color" translation="颜色"/>
	<label commandName="PropertyInput" devLabel="Property" translation="特性"/>
	<label commandName="PropertyValueInput" devLabel="Property Value" translation="特性值"/>
	<label commandName="RIAnimationTooltipHeader" devLabel="Animation" translation="动画"/>
	<label commandName="RIAnimationUnavailableTooltipHeader" devLabel="Animation (unavailable)" translation="动画(不可用)"/>
	<label commandName="RIAutomateLabel" devLabel="Automate" translation="自动"/>
	<label commandName="RIAutomateTooltipHeader" devLabel="Automate" translation="自动"/>
	<label commandName="RIDesignLabel" devLabel="Design" translation="设计"/>
	<label commandName="RIDesignTooltipHeader" devLabel="Design" translation="设计"/>
	<label commandName="RIDrawingDescription" devLabel="Create views and annotations to document the active design for manufacturing." translation="创建视图和标注以记录用于制造的活动设计。"/>
	<label commandName="RIDrawingHeading" devLabel="Drawing" translation="工程图"/>
	<label commandName="RIDrawingRadioLabel" devLabel="Drawing" translation="工程图"/>
	<label commandName="RIDrawingTooltipHeader" devLabel="Drawing" translation="工程图"/>
	<label commandName="RIDrawingUnavailableTooltipHeader" devLabel="Drawing (unavailable)" translation="工程图(不可用)"/>
	<label commandName="RIFromAnimationLabel" devLabel="Animation" translation="动画"/>
	<label commandName="RIFromDesignLabel" devLabel="Design" translation="设计"/>
	<label commandName="RIFromLabel" devLabel="From" translation="从"/>
	<label commandName="RITemplateRadioLabel" devLabel="Template" translation="模板"/>
	<label commandName="RITemplateTooltipHeader" devLabel="Drawing Template" translation="工程图模板"/>
	<label commandName="RITypeLabel" devLabel="Type" translation="类型"/>
	<label commandName="RadialArcAnglehreshold_ASME" devLabel="Radial Arc Angle threshold" translation="径向弧角阈值"/>
	<label commandName="RadialArcLengthThreshold_ASME" devLabel="Radial Arc length threshold" translation="径向弧长阈值"/>
	<label commandName="RadialArcLengthThreshold_ISO" devLabel="Radial Arc length threshold" translation="径向弧长阈值"/>
	<label commandName="Range" devLabel="Range (Multi-File)" translation="范围(多文件)"/>
	<label commandName="RangePreviewText" devLabel="eg. 1-4, 8, 9" translation="例如 1-4、8、9"/>
	<label commandName="RedoCommand" devLabel="Redo" translation="重做"/>
	<label commandName="RedoCommandDesc" devLabel="Redo" translation="重做"/>
	<label commandName="RedundantDimensionRemovalAlgorithm" devLabel="Redundant Dimension Removal Algorithm(Graph)" translation="冗余标注移除算法(图形)"/>
	<label commandName="ReferenceLabelStr" devLabel="Reference/s:" translation="参考:"/>
	<label commandName="ReferencedDesignNotLastestVersion" devLabel="Referenced design is not the latest version. The latest version will be opened." translation="参考设计不是最新版本。将打开最新版本。"/>
	<label commandName="ReferencedDesignNotLastestVersion_ccy" devLabel="Referenced design is not the latest. The latest change will be opened." translation="参考的设计不是最新的。将打开最新的更改。"/>
	<label commandName="RefreshingPropertiesWarnOffline" devLabel="You are working offline" translation="您正在脱机工作"/>
	<label commandName="RefreshingPropertiesWarnOnline" devLabel="Some properties may be out of date" translation="某些特性可能已过期"/>
	<label commandName="RefsUptoDate" devLabel="References are up-to-date." translation="参考是最新的。"/>
	<label commandName="RelativeSmallDim" devLabel="Relative small dim percentage" translation="相对小标注百分比"/>
	<label commandName="RelativelySmallDimWithDifferentXorYAlgo" devLabel="Relatively Small Dims With Different XY Algorithm" translation="XY 不同的相对小标注算法"/>
	<label commandName="RemoveDimsInTemplateWorkflow" devLabel="Remove Quick Dims In Template Workflow" translation="在模板工作流中移除快速标注"/>
	<label commandName="RemoveDisassociatedDims" devLabel="Remove Disassociated Dims" translation="移除已解除关联的标注"/>
	<label commandName="RenameSketchSymbol" devLabel="Rename" translation="重命名"/>
	<label commandName="RenameTitleBlock" devLabel="Rename" translation="重命名"/>
	<label commandName="RenderMode" devLabel="Render Mode" translation="渲染模式"/>
	<label commandName="RenumberNumber" devLabel="Number" translation="编号"/>
	<label commandName="RenumberSelectionInput" devLabel="Selection" translation="选择"/>
	<label commandName="RenumberTypeInput" devLabel="Type" translation="类型"/>
	<label commandName="ReplaceDimText" devLabel="Replace Dimension Text" translation="替换尺寸标注文本"/>
	<label commandName="ReplaceWithConfigAspectGroup" devLabel="Replace Dimension Text" translation="替换尺寸标注文本"/>
	<label commandName="Representation" devLabel="Representation" translation="表达"/>
	<label commandName="ResetBreakoutStartPoint" devLabel="Reset Start Point" translation="重置起点"/>
	<label commandName="ResetBreakoutStartPointTooltip" devLabel="Resets start point to front of the model" translation="将起点重置到模型前面"/>
	<label commandName="ResetDefault" devLabel="Reset Properties" translation="重置特性"/>
	<label commandName="RestartSelectionInput" devLabel="Restart Selection" translation="重新选择"/>
	<label commandName="RevTableEditTextSettings" devLabel="Text Settings" translation="文本设置"/>
	<label commandName="Revision" devLabel="Rev." translation="修订"/>
	<label commandName="RevisionCloudColorButton" devLabel="Select Color" translation="选择颜色"/>
	<label commandName="RevisionCloudColorInput" devLabel="Color" translation="颜色"/>
	<label commandName="RevisionCustom" devLabel="Custom" translation="自定义"/>
	<label commandName="RevisionHistoryLabel" devLabel="Revision History" translation="修订历史"/>
	<label commandName="RevisionHistoryTable" devLabel="RevisionHistoryTable" translation="RevisionHistoryTable"/>
	<label commandName="RevisionHistoryTableColorButton" devLabel="Select Color" translation="选择颜色"/>
	<label commandName="RevisionHistoryTableColorInput" devLabel="Color" translation="颜色"/>
	<label commandName="RevisionMarker" devLabel="Revision" translation="修订"/>
	<label commandName="RevisionMarkerColorButton" devLabel="Select Color" translation="选择颜色"/>
	<label commandName="RevisionMarkerColorInput" devLabel="Color" translation="颜色"/>
	<label commandName="RevisionTableTip" devLabel="Creates a revision history for the selected sheet." translation="为选定图纸创建修订历史。"/>
	<label commandName="Right" devLabel="Right" translation="右"/>
	<label commandName="RotateAngleInput" devLabel="Angle" translation="角度"/>
	<label commandName="RotateReference" devLabel="Reference" translation="参考"/>
	<label commandName="RotateTransformPtPtTooltip" devLabel="Rotate" translation="旋转"/>
	<label commandName="RunAutoCmdsDuringTests" devLabel="Run Auto-Cmds during automation tests" translation="在自动化测试期间运行自动命令"/>
	<label commandName="SE Isometric" devLabel="SE Isometric" translation="东南等轴测"/>
	<label commandName="SKETCHLEADER_PROP" devLabel="Leader Attachment" translation="引线附着"/>
	<label commandName="SKETCHNAME_PROP" devLabel="Sketch Name" translation="草图名称"/>
	<label commandName="STAnimation" devLabel="Animation" translation="动画"/>
	<label commandName="STAnimationDesc" devLabel="Settings that apply to the drawing from a storyboard created in the Animation workspace." translation="应用于在“动画”工作空间中创建的故事板中的工程图的设置。"/>
	<label commandName="STComponent" devLabel="Component" translation="零部件"/>
	<label commandName="STComponentDesc" devLabel="Settings that apply to a component." translation="应用于零部件的设置。"/>
	<label commandName="STFlatPattern" devLabel="Flat Pattern" translation="展开模式"/>
	<label commandName="STFlatPatternDesc" devLabel="Settings that apply to the flat pattern view." translation="应用于展开模式视图的设置。"/>
	<label commandName="STFolded" devLabel="Folded Model" translation="折叠模型"/>
	<label commandName="STFoldedDesc" devLabel="Settings that apply to the folded model view." translation="应用于折叠模型视图的设置。"/>
	<label commandName="STGlobal" devLabel="Global" translation="全局"/>
	<label commandName="STGlobalDesc" devLabel="Settings that apply across all automation preferences and sheets." translation="应用于所有自动化首选项和图纸的设置。"/>
	<label commandName="STMainAssembly" devLabel="Main Assembly" translation="主部件"/>
	<label commandName="STMainAssemblylDesc" devLabel="Preferences that apply to the top-level assembly, including all sub-assemblies and components." translation="应用于顶级部件(包括所有子部件和零部件)的首选项。"/>
	<label commandName="STSubAssembly" devLabel="Sub-Assembly" translation="子部件"/>
	<label commandName="STSubAssemblyDesc" devLabel="Settings that apply to this sub-assembly and its components." translation="应用于此子部件及其零部件的设置。"/>
	<label commandName="SW Isometric" devLabel="SW Isometric" translation="西南等轴测"/>
	<label commandName="SYMBOL_SETTINGS_GROUP" devLabel="Symbol Settings" translation="符号设置"/>
	<label commandName="SameCircularDimFungibilityAlgo" devLabel="Same Circular Dim Fungibility Algorithm" translation="相同圆形标注可替代性算法"/>
	<label commandName="SameLoopCheckerAlgorithm" devLabel="Same Loop Checker Algorithm" translation="相同回路检查器算法"/>
	<label commandName="SameLoopFungibilityAlgo" devLabel="Same Loop Fungibility Algorithm" translation="相同回路可替代性算法"/>
	<label commandName="SaveAsTemplateButton" devLabel="Save as New Drawing Template" translation="另存为新工程图模板"/>
	<label commandName="Scale" devLabel="Scale" translation="缩放"/>
	<label commandName="SearchText" devLabel="Search Symbol" translation="搜索符号"/>
	<label commandName="SecondFrame" devLabel="Second Frame" translation="第二帧"/>
	<label commandName="SectionLinesColorButton" devLabel="Select Color" translation="选择颜色"/>
	<label commandName="SectionLinesColorInput" devLabel="Color" translation="颜色"/>
	<label commandName="SectionViewDepthGroup" devLabel="Section Depth" translation="剖面深度"/>
	<label commandName="SectionViewDepthInput" devLabel="Depth" translation="深度"/>
	<label commandName="SectionViewDistaceButton" devLabel="Set Distance" translation="设置距离"/>
	<label commandName="SectionViewDistanceInput" devLabel="Distance" translation="距离"/>
	<label commandName="SectionViewDistanceOption" devLabel="Distance" translation="距离"/>
	<label commandName="SectionViewFullOption" devLabel="Full" translation="完整"/>
	<label commandName="SectionViewSliceOption" devLabel="Slice" translation="切片"/>
	<label commandName="Select" devLabel="Select" translation="选择"/>
	<label commandName="Select columns" devLabel="Select columns" translation="选择列"/>
	<label commandName="SelectATemplate" devLabel="Selecting a drawing template" translation="选择工程图模板"/>
	<label commandName="SelectDrawingComponents" devLabel="Select components to include in drawing" translation="选择要包含在工程图中的零部件"/>
	<label commandName="SelectEdgeInput" devLabel="Select edge" translation="选择边"/>
	<label commandName="SelectPlacementInput" devLabel="Placement" translation="放置"/>
	<label commandName="SelectedSheets" devLabel="Selected Sheets (Multi-File)" translation="选定的图纸(多文件)"/>
	<label commandName="SelectionInput" devLabel="Selection" translation="选择"/>
	<label commandName="SelectionInputSimpleStyleTail" devLabel="selected" translation="已选定"/>
	<label commandName="SelectionInputSimpleStyleTail2" devLabel="Selected" translation="选定"/>
	<label commandName="ShadedWithVisibleAndHiddenEdges" devLabel="Shaded with Hidden Edges" translation="带隐藏边着色"/>
	<label commandName="ShadedWithVisibleEdges" devLabel="Shaded" translation="着色"/>
	<label commandName="Sheet" devLabel="Sheet" translation="图纸"/>
	<label commandName="Sheet MetalFlat Pattern" devLabel="Sheet Metal: Flat Pattern" translation="钣金: 展开模式"/>
	<label commandName="SheetLandscape" devLabel="Landscape" translation="横向"/>
	<label commandName="SheetMetalFlatGroup" devLabel="Sheet Metal : Flat" translation="钣金: 展开"/>
	<label commandName="SheetMetalFlatPCreateSheet" devLabel="SheetMetal: Flat Pattern" translation="钣金: 展开模式"/>
	<label commandName="SheetMetalFlatPISOWithOrthoViews" devLabel="Add Folded Metal Isometric View" translation="添加折叠金属等轴测视图"/>
	<label commandName="SheetMetalFlatPIncludeBendTable" devLabel="Include Bend Table" translation="包括折弯表"/>
	<label commandName="SheetMetalFlatPIncludeBendTableLoc" devLabel="Bend Table Location" translation="折弯表位置"/>
	<label commandName="SheetMetalFlatPWithOrthoViews" devLabel="SheetMetal: Sheet With Orthogonal Views" translation="钣金: 具有正交视图的图纸"/>
	<label commandName="SheetMetalFoldedCreateSheet" devLabel="Create Sheet" translation="创建图纸"/>
	<label commandName="SheetMetalFoldedGroup" devLabel="Sheet Metal : Folded" translation="钣金: 折叠"/>
	<label commandName="SheetMetalFoldedISOWithOrthoViews" devLabel="Add ISO View with Ortho Views" translation="添加 ISO 视图与正交视图"/>
	<label commandName="SheetMetalFoldedWithOrthoViews" devLabel="Sheet With Orthogonal Views" translation="具有正交视图的图纸"/>
	<label commandName="SheetPortrait" devLabel="Portrait" translation="纵向"/>
	<label commandName="SheetRange" devLabel="Range (C2:D5)" translation="范围(C2:D5)"/>
	<label commandName="SheetSet" devLabel="Sheet Set" translation="图纸集"/>
	<label commandName="SheetsToCreate" devLabel="Sheet Count" translation="图纸计数"/>
	<label commandName="Shortened" devLabel="Shortened" translation="缩短"/>
	<label commandName="ShowHistory" devLabel="History" translation="历史记录"/>
	<label commandName="ShowHistoryClose" devLabel="Close" translation="关闭"/>
	<label commandName="ShowOutline" devLabel="Show Outline" translation="显示轮廓"/>
	<label commandName="ShowSheetContext" devLabel="Show Sheet Context" translation="显示图纸上下文"/>
	<label commandName="ShowSheetLayoutGrid" devLabel="Show Sheet Layout Grid" translation="显示图纸布局栅格"/>
	<label commandName="ShowStandardLabel" devLabel="Show Standard Label" translation="显示标准标签"/>
	<label commandName="ShowUCA" devLabel="Change Summary" translation="更改概要"/>
	<label commandName="SimilarHoleIdentifierAlgo" devLabel="Similar Hole Identifier Algorithm" translation="相似孔标识符算法"/>
	<label commandName="SimpleDialog_Cancel" devLabel="Cancel" translation="取消"/>
	<label commandName="SimpleDialog_Commit" devLabel="OK" translation="确定"/>
	<label commandName="Size" devLabel="Size" translation="尺寸"/>
	<label commandName="SketchAlreadyPresent" devLabel="A sketch with same name already exists." translation="同名草图已存在。"/>
	<label commandName="SketchLineTypeInput" devLabel="Line Type" translation="线型"/>
	<label commandName="SketchLineWidthInput" devLabel="Line Width" translation="线宽"/>
	<label commandName="SketchNameTooLong" devLabel="Sketch name is too long." translation="草图名称太长。"/>
	<label commandName="SketchShapes" devLabel="Cut Profile" translation="剖切轮廓"/>
	<label commandName="SketchShowHideCommand" devLabel="Show/Hide" translation="显示/隐藏"/>
	<label commandName="SketchSymboEditAttributeCommand" devLabel="Edit custom label" translation="编辑自定义标签"/>
	<label commandName="SketchTypeInput" devLabel="Sketch Type" translation="草图类型"/>
	<label commandName="SliderValue" devLabel="Slider Value" translation="滑块值"/>
	<label commandName="Small" devLabel=" Dot Small Blank" translation=" 空心小圆点"/>
	<label commandName="SmallDimPriorityModifierAlgo" devLabel="Small Dimension Priority Modifier" translation="小标注优先级修改器"/>
	<label commandName="SmallDimThreshold_ASME" devLabel="Small dimension threshold" translation="小标注阈值"/>
	<label commandName="SmallDimThreshold_ISO" devLabel="Small dimension threshold" translation="小标注阈值"/>
	<label commandName="SmartTempMsg" devLabel="Drawing Template has views and sheets added. Sheet and View will be generated accordingly." translation="工程图模板已添加视图和图纸。将相应地生成图纸和视图。"/>
	<label commandName="SnapToGrid" devLabel="Snap to Grid" translation="捕捉到栅格"/>
	<label commandName="Source" devLabel="Source" translation="源"/>
	<label commandName="Spacer" devLabel="Spacer" translation="分隔符"/>
	<label commandName="SpreadSheetFiles" devLabel="Spread Sheet Files" translation="电子表格文件"/>
	<label commandName="Standard" devLabel="Standard" translation="标准"/>
	<label commandName="Storyboard" devLabel="Storyboard" translation="故事板"/>
	<label commandName="StoryboardRepresentation" devLabel="Storyboard" translation="故事板"/>
	<label commandName="SubASMCreateSheetOrtho" devLabel="Sheet with Ortho Views" translation="带正交视图的图纸"/>
	<label commandName="SubASMGroup" devLabel="Sub Assemblies" translation="子部件"/>
	<label commandName="SubASMISOGroup" devLabel="Sub Assemblies ISO" translation="子部件 ISO"/>
	<label commandName="SubASMOrthoGroup" devLabel="Sub Assemblies Ortho" translation="子部件正交"/>
	<label commandName="SubASMOrthoPartListLocation" devLabel="Default Parts List Location" translation="默认明细表位置"/>
	<label commandName="SubASMSheetCreate" devLabel="Create Sub Assembly" translation="创建子部件"/>
	<label commandName="SubASMSheetISOPartList" devLabel="Include Parts List" translation="包括明细表"/>
	<label commandName="SubASMSheetOrthoPartList" devLabel="Include Parts List" translation="包括明细表"/>
	<label commandName="SubASMSheetSingleISO" devLabel="Sheet with Single ISO View" translation="带单个 ISO 视图的图纸"/>
	<label commandName="SubASmSheetISOPartListLocation" devLabel="Default Parts List Location" translation="默认明细表位置"/>
	<label commandName="SurfaceTextureReset" devLabel="Reset" translation="重置"/>
	<label commandName="SurfaceTextureResetDesc" devLabel="Reset all properties to default values" translation="将所有特性重置为默认值"/>
	<label commandName="SwitchConfigWarningMsg" devLabel="&lt;p&gt;The &lt;b&gt;Configuration&lt;/b&gt; you select will replace the original &lt;b&gt;Configuration&lt;/b&gt;. It may impact multiple views and sheets in this drawing.&lt;/p&gt;" translation="&lt;p&gt;您选择的&lt;b&gt;配置&lt;/b&gt;将替换原始&lt;b&gt;配置&lt;/b&gt;。它可能会影响此工程图中的多个视图和图纸。&lt;/p&gt;"/>
	<label commandName="SwitchConfigWarningTitle" devLabel="Changes may impact multiple views/sheets" translation="更改可能会影响多个视图/图纸"/>
	<label commandName="SwitchConfigurationCommand" devLabel="Switch Configuration" translation="切换配置"/>
	<label commandName="SymbolColorButton" devLabel="Select Color" translation="选择颜色"/>
	<label commandName="SymbolColorInput" devLabel="Color" translation="颜色"/>
	<label commandName="SymbolDesc" devLabel="Shows the Symbol Object Properties" translation="显示符号对象特性"/>
	<label commandName="SymbolName" devLabel="Symbol Name" translation="符号名称"/>
	<label commandName="SymbolToolTip" devLabel="Symbol" translation="符号"/>
	<label commandName="SymmetricDimsGeneratorAlgo" devLabel="Symmetric Dim Generator Algorithm" translation="对称标注生成器算法"/>
	<label commandName="SymmetricRecipeSettingAlgo" devLabel="Symmetric Recipe Setting Algorithm" translation="对称配制设置算法"/>
	<label commandName="SymmetricRecipeTitle" devLabel="Symmetric Dimensions" translation="对称标注"/>
	<label commandName="SymmetricWithBaselineDimsGenerator" devLabel="Symmetric With Baseline Dim Generator Algorithm" translation="与基线标注对称生成器算法"/>
	<label commandName="SymmetricWithBaselineRecipeTitle" devLabel="Symmetric with Baseline&#xA;Dimensions" translation="与基线标注&#xA;对称"/>
	<label commandName="SymmetricWithOrdinateRecipeTitle" devLabel="Symmetric with Ordinate Dimensions" translation="与坐标标注对称"/>
	<label commandName="SymmetryDimFungibilityAlgo" devLabel="Symmetry Dim Fungibility Algorithm" translation="对称标注可替代性算法"/>
	<label commandName="TABLE_TITLE_BENDTABLE" devLabel="Bend Table" translation="折弯表"/>
	<label commandName="TABLE_TITLE_PARTSLIST" devLabel="Parts List" translation="明细表"/>
	<label commandName="TIP_DESC_H11A11" devLabel="Pivots, latches, fits of parts exposed to corrosive effects,&#xA;contamination with dust and thermal or mechanical deformations." translation="暴露于腐蚀作用、灰尘污染以及热变形或&#xA;机械变形环境下的枢轴、锁扣、零件配合。"/>
	<label commandName="TIP_DESC_H11C11" devLabel="Loose running fit for wide commercial tolerances&#xA;or allowances on external members." translation="松动配合，适用于外部构件的&#xA;宽商业公差或允许值。"/>
	<label commandName="TIP_DESC_H11D9" devLabel="Rotary fit connection with considerable clearance&#xA;Assembly-with a large clearance&#xA;Multiple collated shafts of manufacturing and piston machines,&#xA;Shafts from melted steel circular sticks." translation="间隙非常大的旋转配合连接&#xA;装配-间隙较大&#xA;制造与活塞机的多个组合轴，&#xA;由熔铸钢圆棒材加工而成的轴。"/>
	<label commandName="TIP_DESC_H11H9" devLabel="Shear fit connection&#xA;Put on without larger force&#xA;Components can move by hand after lubrication&#xA;Lightly disassemble portions, expanding ring,&#xA;Components of agricultural machines fixed to shafts with pivots,&#xA;screws or jacket join." translation="剪切配合连接&#xA;无需施加较大的力即可安装&#xA;润滑后，可用手移动零部件&#xA;轻轻拆卸各个部分，胀圈，&#xA;农业机械上通过枢轴、螺钉或套管&#xA;固定在轴上的零部件。"/>
	<label commandName="TIP_DESC_H7G6" devLabel="Sliding fit not intended to run freely, but to move and turn freely and locate accurately." translation="滑动配合不是为了自由运动，而是为了自由移动和转动以及精确定位。"/>
	<label commandName="TIP_DESC_H7H6" devLabel="Locational clearance fit provides snug fit for&#xA;locating stationary parts&#xA;can be freely assembled and disassembled." translation="定位间隙配合提供紧密贴合，&#xA;用于定位固定零件，&#xA;可自由装配和拆卸。"/>
	<label commandName="TIP_DESC_H7J6" devLabel="Shift pressure connection with small clearance and imperceptible interference&#xA;Assembled by hand&#xA;Used for easily disassemble joints of gears, pulleys, sleeves, etc." translation="间隙较小且过盈难以察觉的变速压力连接&#xA;用手装配&#xA;用于齿轮、皮带轮、套筒等部件上容易拆卸的连接部位。"/>
	<label commandName="TIP_DESC_H7JS6" devLabel="Shift pressure connection with small clearance and imperceptible interference&#xA;Assembled by hand&#xA;Used for easily disassemble joints of gears, pulleys, sleeves, etc." translation="间隙较小且过盈难以察觉的变速压力连接&#xA;用手装配&#xA;用于齿轮、皮带轮、套筒等部件上容易拆卸的连接部位。"/>
	<label commandName="TIP_DESC_H7K6" devLabel="Locational transition fit for accurate location,&#xA;a compromise between clearance and interference." translation="定位过渡配合，适用于精确定位，&#xA;这是间隙与过盈之间的一种折衷方案。"/>
	<label commandName="TIP_DESC_H7N6" devLabel="Locational transition fit for more accurate&#xA;location where greater interference is permissible." translation="定位过渡配合，适用于更精确&#xA;的定位，允许较大的过盈。"/>
	<label commandName="TIP_DESC_H7P6" devLabel="Locational interference fit for parts requiring rigidity&#xA;and alignment with prime accuracy of location&#xA;but without special bore pressure requirements." translation="定位过盈配合，适用于需要高刚性&#xA;和对齐与极精确定位但对孔内压&#xA;无特殊要求的零件。"/>
	<label commandName="TIP_DESC_H7R6" devLabel="Pressure connection with middle interference&#xA;Assembled using heavy force. Different&#xA;temperatures of hole and shaft is proffered.&#xA;Used for hubs of clutch discs or bearing sleeves" translation="中等过盈的压力连接&#xA;用大力装配。&#xA;提供了孔和轴的不同温度。&#xA;用于离合器片的轮毂或轴承套筒"/>
	<label commandName="TIP_DESC_H7S6" devLabel="Medium drive fit for ordinary steel parts or shrink fits&#xA;on light sections, the tightest fit usable with cast iron." translation="中等推入配合，适用于普通钢制零件或薄壁件的&#xA;冷缩配合，这是铸铁所能使用的最紧配合。"/>
	<label commandName="TIP_DESC_H7U6" devLabel="Force fit suitable for parts which can be highly stressed or&#xA;for shrink fits where the heavy pressing forces required are impractical." translation="压入配合，适用于可承受高应力的零件&#xA;或所需压紧力过大而难以实现的冷缩配合。"/>
	<label commandName="TIP_DESC_H8E8" devLabel="More clear rotary fit connections.&#xA;Assembly-with larger clearance.&#xA;Fit connections for long collated shafts, e.g. agricultural machines." translation="更大间隙的旋转配合连接。&#xA;装配-间隙较大。&#xA;适用于长组合轴(如农业机械)的配合连接。"/>
	<label commandName="TIP_DESC_H8F7" devLabel="Close running fit for running on accurate machines&#xA;and for accurate location at moderate speeds and journal pressures." translation="紧动配合，适用于精密机械的运动&#xA;以及中等转速和轴颈压力下的精确定位。"/>
	<label commandName="TIP_DESC_H8U8" devLabel="Pressure connection with a large interference&#xA;Assembled using heavy force at different component temperatures&#xA;Used for hubs of gears or flanges connected to the shaft" translation="过盈较大的压力连接&#xA;在不同的零部件温度下用大力装配&#xA;用于齿轮的轮毂或连接到轴的法兰"/>
	<label commandName="TIP_DESC_H8X8" devLabel="Pressure connection with a large interference&#xA;Assembled using heavy force at different component temperatures&#xA;Used for hubs of gears or flanges connected to the shaft." translation="过盈较大的压力连接&#xA;在不同的零部件温度下用大力装配&#xA;用于齿轮的轮毂或连接到轴的法兰。"/>
	<label commandName="TIP_DESC_H9D9" devLabel="Free running fit not for use where accuracy is essential,&#xA;but good for large temperature variations, high running speeds,&#xA;or heavy journal pressures." translation="自由动配合，不适用于要求高精度的场合，&#xA;但适用于温度变化大、转速高&#xA;或轴颈压力大的情况。"/>
	<label commandName="Table Settings" devLabel="Table Settings" translation="表设置"/>
	<label commandName="TableDesc" devLabel="Shows the Table Object Properties" translation="显示表对象特性"/>
	<label commandName="TableDirectionInput" devLabel="Table Direction" translation="表格方向"/>
	<label commandName="TableHeader" devLabel="Table Header" translation="表头"/>
	<label commandName="TableStructureInput" devLabel="Structure" translation="结构"/>
	<label commandName="TableToolTip" devLabel="Table" translation="表格"/>
	<label commandName="TangencyPointPriorityAlgo" devLabel="G1 Continuity Algorithm" translation="G1 连续性算法"/>
	<label commandName="TangentEdge" devLabel="Tangent Edges" translation="相切边"/>
	<label commandName="TangentEdgeColorButton" devLabel="Select Color" translation="选择颜色"/>
	<label commandName="TangentEdgeColorInput" devLabel="Color" translation="颜色"/>
	<label commandName="TangentEdgeDesc" devLabel="Controls the display style for tangent edges." translation="控制相切边的显示样式。"/>
	<label commandName="TangentEdges" devLabel="Tangent Edges" translation="相切边"/>
	<label commandName="TaperSlopeCalculated" devLabel=" &lt;Calculated&gt;" translation=" &lt;已计算&gt;"/>
	<label commandName="TechnicalRef" devLabel="Technical reference" translation="技术参考"/>
	<label commandName="TemplateBaseDocument" devLabel="Template" translation="模板"/>
	<label commandName="TemplateGroup" devLabel="Template Setings" translation="模板设置"/>
	<label commandName="TemplateSheetName_Assembly" devLabel="Assembly" translation="部件"/>
	<label commandName="TemplateSheetName_AssemblyInstruction" devLabel="Assembly Instruction" translation="部件说明"/>
	<label commandName="TemplateSheetName_Component" devLabel="Component Detail" translation="零部件详细信息"/>
	<label commandName="TemplateSheetName_SheetMetal" devLabel="Sheet Metal Detail" translation="钣金详细信息"/>
	<label commandName="TextAdd" devLabel="" translation=""/>
	<label commandName="TextAlignment" devLabel="Text Alignment" translation="文本对齐"/>
	<label commandName="TextBold" devLabel="Bold" translation="加粗"/>
	<label commandName="TextColor" devLabel="Color" translation="颜色"/>
	<label commandName="TextColorTooltip" devLabel="Select Color" translation="选择颜色"/>
	<label commandName="TextCommands" devLabel="Text Commands" translation="文本命令"/>
	<label commandName="TextDesign" devLabel="Design" translation="设计"/>
	<label commandName="TextFont" devLabel="Font" translation="字体"/>
	<label commandName="TextHeight" devLabel="Height" translation="高度"/>
	<label commandName="TextHeightCustom" devLabel="Custom" translation="自定义"/>
	<label commandName="TextHeightLarge" devLabel="Large" translation="大"/>
	<label commandName="TextHeightMedium" devLabel="Medium" translation="中等"/>
	<label commandName="TextHeightSmall" devLabel="Small" translation="小"/>
	<label commandName="TextItalic" devLabel="Italic" translation="倾斜"/>
	<label commandName="TextProperty" devLabel="Property" translation="特性"/>
	<label commandName="TextSource" devLabel="Source" translation="源"/>
	<label commandName="TextStyle" devLabel="" translation=""/>
	<label commandName="TextType" devLabel="Type" translation="类型"/>
	<label commandName="TextUnderline" devLabel="Underline" translation="下划线"/>
	<label commandName="Thick" devLabel="Thick" translation="粗"/>
	<label commandName="Thick_Linewidth" devLabel="(Thick)" translation="(粗)"/>
	<label commandName="Thin" devLabel="Thin" translation="细"/>
	<label commandName="Thin_Linewidth" devLabel="(Thin)" translation="(细)"/>
	<label commandName="ThreadEdges" devLabel="Thread Edges" translation="螺纹边"/>
	<label commandName="ThreadEdgesDesc" devLabel="Displays threads on threaded edges." translation="显示螺纹边上的螺纹。"/>
	<label commandName="ThreeEdgesIntersectionDimPriorityAlgo" devLabel="Three Edges Intersection DimPriority Algorithm" translation="三条边相交标注优先级算法"/>
	<label commandName="Tidy Up Restricted Message" devLabel="Auto-align your notes, tables, and dimensions so that you can improve your design efficiency." translation="自动对齐注释、表和尺寸，以便提高设计效率。"/>
	<label commandName="Tidy Up Restricted Title" devLabel="Tidy Up" translation="整理"/>
	<label commandName="Title1" devLabel="Title" translation="标题"/>
	<label commandName="Title2" devLabel="" translation=""/>
	<label commandName="Title3" devLabel="" translation=""/>
	<label commandName="TitleBlockAttributesGroup" devLabel="Attributes" translation="属性"/>
	<label commandName="TitleBlockDeleteLogo" devLabel="Delete Image" translation="删除图像"/>
	<label commandName="TitleBlockInsertLogo" devLabel="Insert Image" translation="插入图像"/>
	<label commandName="TitleBlockLogoDistX" devLabel="X Distance" translation="X 距离"/>
	<label commandName="TitleBlockLogoDistY" devLabel="Y Distance" translation="Y 距离"/>
	<label commandName="TitleBlockLogoGroup" devLabel="Logo" translation="徽标"/>
	<label commandName="TitleBlockLogoRotate" devLabel="Rotate" translation="旋转"/>
	<label commandName="TitleBlockLogoScale" devLabel="Scale" translation="缩放"/>
	<label commandName="TitleBlockProject" devLabel="Project" translation="项目"/>
	<label commandName="TitleBlocksTable" devLabel="Title Blocks Table" translation="标题栏表"/>
	<label commandName="ToLinkFile" devLabel="Link File" translation="链接文件"/>
	<label commandName="ToProceed" devLabel="Proceed Anyway" translation="仍要继续"/>
	<label commandName="ToggleOtherGeometry" devLabel="Toggle Other Geometry" translation="切换其他几何图元"/>
	<label commandName="TogglePaletteBorder" devLabel="Toggle Palette Border" translation="切换选项板边框"/>
	<label commandName="TogglePaletteGrid" devLabel="Toggle Palette Grid" translation="切换选项板栅格"/>
	<label commandName="TogglePaletteSheet" devLabel="Toggle Palette Sheet" translation="切换选项板图纸"/>
	<label commandName="TogglePaletteSnap" devLabel="Toggle Palette Snap" translation="切换选项板捕捉"/>
	<label commandName="ToolTip_HelpButton" devLabel=" More Information. " translation=" 详细信息。 "/>
	<label commandName="ToolTip_NumberOfCopiesLabel" devLabel=" &lt;b&gt;Number of Copies&lt;/b&gt; &lt;br&gt; Define the number of copies to be &#xA; printed for each sheet." translation=" &lt;b&gt;份数&lt;/b&gt; &lt;br&gt;定义要打印每张&#xA;图纸的份数。"/>
	<label commandName="ToolTip_OffsetLabel" devLabel=" &lt;b&gt;OffSet&lt;/b&gt; &lt;br&gt; Offset the contents of your print. " translation=" &lt;b&gt;偏移&lt;/b&gt; &lt;br&gt;偏移打印的内容。"/>
	<label commandName="ToolTip_Offset_XEdit" devLabel=" Specify the horizontal offset &#xA; from left bottom corner." translation=" 指定自左下角的&#xA;水平偏移。"/>
	<label commandName="ToolTip_Offset_YEdit" devLabel=" Specify the vertical offset &#xA; from left bottom corner." translation=" 指定自左下角的&#xA;垂直偏移。"/>
	<label commandName="ToolTip_OrientationLabel" devLabel=" &lt;b&gt;Orientation&lt;/b&gt; &lt;br&gt; Choose whether the orientation of the &#xA; print will be portrait or landscape." translation=" &lt;b&gt;方向&lt;/b&gt; &lt;br&gt;选择打印的方向&#xA;是纵向还是横向。"/>
	<label commandName="ToolTip_Orientation_LandscapeButton" devLabel=" Landscape mode. " translation=" 横向模式。 "/>
	<label commandName="ToolTip_Orientation_PotrateButton" devLabel=" Portrait mode. " translation=" 纵向模式。 "/>
	<label commandName="ToolTip_PaperSizeLabel" devLabel=" &lt;b&gt;Paper Size&lt;/b&gt; &lt;br&gt; Select the paper size to use to print &#xA; your drawings." translation=" &lt;b&gt;图纸尺寸&lt;/b&gt; &lt;br&gt;选择用于打印工程图的&#xA;图纸尺寸。"/>
	<label commandName="ToolTip_PrintLineWidthsLabel" devLabel=" &lt;b&gt;Print Line Widths&lt;/b&gt; &lt;br&gt; Choose whether or not lines will be &#xA; printed with their assigned line &#xA; widths." translation=" &lt;b&gt;打印线宽&lt;/b&gt; &lt;br&gt;选择是否使用&#xA;指定的线宽打印&#xA;线。"/>
	<label commandName="ToolTip_PrintPreviewLabel" devLabel=" &lt;b&gt;Preview&lt;/b&gt; &lt;br&gt; Toggles the visibility of the preview &#xA; pane." translation=" &lt;b&gt;预览&lt;/b&gt; &lt;br&gt;切换预览窗格的&#xA;可见性。"/>
	<label commandName="ToolTip_PrintRange_AllSheetsLabel" devLabel=" &lt;b&gt;Print Range: All Sheets &lt;/b&gt; &lt;br&gt; Will print all sheets within the &#xA; currently opened drawing." translation=" &lt;b&gt;打印范围: 所有图纸&lt;/b&gt; &lt;br&gt;将打印当前打开的工程图&#xA;中的所有图纸。"/>
	<label commandName="ToolTip_PrintRange_CurrentSheetLabel" devLabel=" &lt;b&gt;Print Range: Current Sheet&lt;/b&gt; &lt;br&gt; Will Print the current (active) sheet of &#xA; the open drawing." translation=" &lt;b&gt;打印范围: 当前图纸&lt;/b&gt; &lt;br&gt;将打印打开的工程图的当前&#xA;(活动)图纸。"/>
	<label commandName="ToolTip_PrintRange_SheetsInRangeLabel" devLabel=" &lt;b&gt;Print Range: Sheets in Range&lt;/b&gt; &lt;br&gt;Will print a range of sheets in the &#xA; currently opened drawing. The sheets &#xA; can be adjacent or not." translation=" &lt;b&gt;打印范围: 某一范围的图纸&lt;/b&gt; &lt;br&gt;将打印当前打开的工程图&#xA;中的一系列图纸。这些图纸&#xA;可以相邻，也可以不相邻。"/>
	<label commandName="ToolTip_PrinterNameLabel" devLabel=" &lt;b&gt;Printer Name&lt;/b&gt; &lt;br&gt; Select the printer to use. " translation=" &lt;b&gt;打印机名称&lt;/b&gt; &lt;br&gt;选择要使用的打印机。"/>
	<label commandName="ToolTip_PropertiesButton" devLabel=" Additional printer Properties. " translation=" 其他打印机特性。 "/>
	<label commandName="ToolTip_ScaleLabel" devLabel=" &lt;b&gt;Scale&lt;/b&gt; &lt;br&gt; Choose or set the scale to print the &#xA; selected sheets." translation=" &lt;b&gt;比例&lt;/b&gt; &lt;br&gt;选择或设置打印选定图纸&#xA;的比例。"/>
	<label commandName="Tooltip" devLabel="" translation=""/>
	<label commandName="Top" devLabel="Top" translation="顶部"/>
	<label commandName="TopLeft" devLabel="TopLeft" translation="左上"/>
	<label commandName="TopRight" devLabel="TopRight" translation="右上"/>
	<label commandName="TransformPointToPoint" devLabel="Transform" translation="变换"/>
	<label commandName="TransformSelectionInput" devLabel="Selection" translation="选择"/>
	<label commandName="TurnedComponentDimPriorityAlgo" devLabel="Turned Component Dim Priority Algorithm" translation="车削零部件标注优先级算法"/>
	<label commandName="TweakTrailColorButton" devLabel="Select Color" translation="选择颜色"/>
	<label commandName="TweakTrailColorInput" devLabel="Color" translation="颜色"/>
	<label commandName="Type" devLabel="Type" translation="类型"/>
	<label commandName="UCAError" devLabel="Can't check the status of external references right now." translation="目前无法检查外部参考的状态。"/>
	<label commandName="UCAOfflineQAT" devLabel="You are working offline. Changes to external references won't be synced." translation="您正在脱机工作。对外部参考的更改将不会同步。"/>
	<label commandName="UCAOfflineToolbar" devLabel="Not available while offline." translation="脱机时不可用。"/>
	<label commandName="UPDATEPROP" devLabel="Updating properties... " translation="正在更新特性..."/>
	<label commandName="Undefined Size" devLabel="Undefined Size" translation="未定义尺寸"/>
	<label commandName="UndoCommand" devLabel="Undo" translation="撤消"/>
	<label commandName="UndoCommandDesc" devLabel="Undo" translation="撤消"/>
	<label commandName="UniqueSectionGeneratorAlgorithm" devLabel="Unique Section Generator Algorithm" translation="唯一截面生成器算法"/>
	<label commandName="UniqueSectionPriorityReducingAlgo" devLabel="Unique Section Dim Priority Reducing Algorithm" translation="唯一截面标注优先级降低算法"/>
	<label commandName="Update2NonMilestoneFromMilestone" devLabel="No new milestones available. Do you want to update the referenced design to the latest version?" translation="没有可用的新里程碑。是否要将参考设计更新到最新版本？"/>
	<label commandName="Update2NonMilestoneFromMilestone_ccy" devLabel="No new versions available. Do you want to update the referenced design to the latest change?" translation="没有新版本可用。是否要将参考的设计更新为最新更改？"/>
	<label commandName="UpdateToSelectedTemplate" devLabel="Update to Selected Template" translation="更新到选定模板"/>
	<label commandName="UpperLimit" devLabel="Upper Limit" translation="上限"/>
	<label commandName="UseDocumentSetting" devLabel="Use Document Settings" translation="使用文档设置"/>
	<label commandName="UseModelSetting" devLabel="Use Model Settings" translation="使用模型设置"/>
	<label commandName="VIA_PAIRS_TABLE_TITLE" devLabel="Via Pairs" translation="过孔对"/>
	<label commandName="VersionComponentsSelInput" devLabel="Components" translation="零部件"/>
	<label commandName="VersionExistsLabelStr" devLabel=" exists)" translation=" 存在)"/>
	<label commandName="VersionLabelStr" devLabel=" Version: " translation=" 版本: "/>
	<label commandName="VersionOutdatedStr" devLabel="Drawing is out of date; it's referencing an older version of the design. &#xA;&#xA;Click to update the drawing to the latest version." translation="工程图已过期；它参考的是早期版本的设计。&#xA;&#xA;单击以将工程图更新为最新版本。"/>
	<label commandName="VersionOutdatedStr_ccy" devLabel="Drawing is out of date; it's referencing a previous change to the design. &#xA;&#xA;Click to update the drawing to the latest change." translation="工程图已过期，它参考的是以前的设计更改。&#xA;&#xA;单击以将工程图更新为最新更改。"/>
	<label commandName="VersionUnavailableNowStr" devLabel="&#xA;Version information unavailable at the moment" translation="&#xA;版本信息目前不可用"/>
	<label commandName="VersionUnavailableNowStr1" devLabel=" Version information unavailable at the moment" translation=" 版本信息目前不可用"/>
	<label commandName="VersionUnavailableNowStr1_ccy" devLabel=" Change information unavailable at the moment" translation=" 更改信息目前不可用"/>
	<label commandName="VersionUnavailableNowStr_ccy" devLabel="Change information unavailable at the moment" translation="更改信息目前不可用"/>
	<label commandName="VersionUnavailableStr" devLabel="&#xA;Version information unavailable offline" translation="&#xA;版本信息在脱机模式下不可用"/>
	<label commandName="VersionUnavailableStr_ccy" devLabel="Change information unavailable offline" translation="更改信息脱机不可用"/>
	<label commandName="VersionUpdatedStr" devLabel="Drawing is up to date; it's referencing the latest version of the design." translation="工程图为最新版本；它参考的是最新版本的设计。"/>
	<label commandName="VersionUpdatedStr_ccy" devLabel="Drawing is up to date; it's referencing the latest change to the design." translation="工程图是最新的；它参考的是对设计的最新更改。"/>
	<label commandName="VerticalBaseLineDimGenAlgorithm" devLabel="Vertical Base Line Dim Algorithm" translation="垂直基线标注算法"/>
	<label commandName="VerticalChainDimGenAlgorithm" devLabel="Vertical Chain Dim Algorithm" translation="垂直链标注算法"/>
	<label commandName="VeryThick" devLabel="Very Thick" translation="非常粗"/>
	<label commandName="VeryThin" devLabel="Very Thin" translation="非常细"/>
	<label commandName="ViaPairsTableTip" devLabel="Creates via pairs table." translation="创建过孔对表。"/>
	<label commandName="ViewDefaultAnimation" devLabel="Animation" translation="动画"/>
	<label commandName="ViewDefaultAssembly" devLabel="Assembly" translation="部件"/>
	<label commandName="ViewDefaultComponent" devLabel="Component" translation="零部件"/>
	<label commandName="ViewDefaultFolded" devLabel="Sheet Metal: Folded" translation="钣金: 折叠"/>
	<label commandName="ViewDefaultGroup" devLabel="Drawing View Defaults" translation="工程视图默认设置"/>
	<label commandName="ViewDefaultPadding" devLabel="View Default Padding val * textHeight" translation="视图默认填充值 * textHeight"/>
	<label commandName="ViewDefaultStyleGroup" devLabel="Drawing View" translation="工程视图"/>
	<label commandName="ViewDefaultStyleGroupDesc" devLabel="Controls the drawing view settings such as style, edge visibility, center marks, and center lines creation." translation="控制样式、边可见性、中心标记和中心线创建等工程视图设置。"/>
	<label commandName="ViewDefaultSubAssembly" devLabel="Sub Assembly" translation="子部件"/>
	<label commandName="ViewDefaultType" devLabel="Type" translation="类型"/>
	<label commandName="ViewDefaultsTabToolipBase" devLabel="View Defaults" translation="视图默认设置"/>
	<label commandName="ViewDefaultsTabToolipDesc" devLabel="Shows the drawing view default settings" translation="显示工程视图默认设置"/>
	<label commandName="ViewDesc" devLabel="Shows the View Object Properties" translation="显示视图对象特性"/>
	<label commandName="ViewLabelColorButton" devLabel="Select Color" translation="选择颜色"/>
	<label commandName="ViewLabelColorInput" devLabel="Color" translation="颜色"/>
	<label commandName="ViewMsgSeparator" devLabel="View Message Separator" translation="查看消息分隔符"/>
	<label commandName="ViewNestCorner" devLabel="View Nest corner 0UL 1UR 2LL 3LR 4UC 5LC 6MC" translation="视图嵌套角点 0UL 1UR 2LL 3LR 4UC 5LC 6MC"/>
	<label commandName="ViewNestDirection" devLabel="View Nest Direction 0-HZ" translation="视图嵌套方向 0-HZ"/>
	<label commandName="ViewPreference_ASME" devLabel="Auto View Preference 0T 1L 2B 3R" translation="自动视图首选项 0T 1L 2B 3R"/>
	<label commandName="ViewPreference_ISO" devLabel="Auto View Preference 0T 1L 2B 3R" translation="自动视图首选项 0T 1L 2B 3R"/>
	<label commandName="ViewSetOptionTooltip" devLabel="&lt;b&gt;View&lt;/b&gt;&lt;br&gt;&lt;br&gt;Switches the configuration for the selected view and all of its dependent views." translation="&lt;b&gt;视图&lt;/b&gt;&lt;br&gt;&lt;br&gt;切换选定视图及其所有从属视图的配置。"/>
	<label commandName="ViewStyle" devLabel="Style" translation="样式"/>
	<label commandName="ViewToolTip" devLabel="View" translation="视图"/>
	<label commandName="VisibleAndHiddenEdge" devLabel="Visible and Hidden Edges" translation="可见边和隐藏边"/>
	<label commandName="VisibleEdges" devLabel="Visible Edges" translation="可见边"/>
	<label commandName="VisibleOuterLineColorButton" devLabel="Select Color" translation="选择颜色"/>
	<label commandName="VisibleOuterLineColorInput" devLabel="Color" translation="颜色"/>
	<label commandName="Weight" devLabel="Weight" translation="重量"/>
	<label commandName="WeldOptions" devLabel="Options" translation="选项"/>
	<label commandName="WeldSymReset" devLabel="Reset" translation="重置"/>
	<label commandName="WeldSymResetDesc" devLabel="Reset all properties to default values" translation="将所有特性重置为默认值"/>
	<label commandName="WeldSymTabBar" devLabel="Tab Bar" translation="选项卡栏"/>
	<label commandName="WeldSymTailDesc" devLabel="Show tail properties" translation="显示尾部特性"/>
	<label commandName="WeldSymTailToolTip" devLabel="Tail" translation="尾部"/>
	<label commandName="Wide" devLabel="Wide" translation="宽"/>
	<label commandName="WorkSheet" devLabel="Worksheet" translation="工作表"/>
	<label commandName="Yes" devLabel="Yes" translation="是"/>
	<label commandName="addRevision" devLabel="Add Revision" translation="添加修订"/>
	<label commandName="addRevisionRow" devLabel="Add Revision Row" translation="添加修订行"/>
	<label commandName="alignLeft" devLabel="Left" translation="左"/>
	<label commandName="alignRight" devLabel="Right" translation="右"/>
	<label commandName="autoCenterGroup" devLabel="Automated Center Marks and Center Lines" translation="自动添加中心标记和中心线"/>
	<label commandName="autoPreferencesMsg" devLabel="Create sheets for assembly, subassembly, components, folded sheet metal, flat pattern sheet metal.&#xA;" translation="为部件、子部件、零部件、折叠钣金、展开模式钣金创建图纸。&#xA;"/>
	<label commandName="bottomCenter" devLabel="Bottom Center" translation="中下"/>
	<label commandName="bottomLeft" devLabel="Bottom Left" translation="左下"/>
	<label commandName="bottomRight" devLabel="Bottom Right" translation="右下"/>
	<label commandName="bottomToTop" devLabel="Up" translation="向上"/>
	<label commandName="breakoutInheritance" devLabel="Inherit Breakout" translation="继承局部剖视图"/>
	<label commandName="cancelCreateDrawing" devLabel="Cancel" translation="取消"/>
	<label commandName="centerText" devLabel="Center" translation="中心"/>
	<label commandName="cm" devLabel="cm" translation="厘米"/>
	<label commandName="columnVisibility" devLabel="Toggle Column Visibility" translation="切换列可见性"/>
	<label commandName="createLayerStackTable" devLabel="Layer Stack" translation="层叠"/>
	<label commandName="cutCheckBoxes" devLabel="Check Boxes for Participants" translation="用于参与者的复选框"/>
	<label commandName="cutParticipantTable" devLabel="Cut Participant Table" translation="剪切参与者表"/>
	<label commandName="cutTableGroup" devLabel="Objects To Cut" translation="要剪切的对象"/>
	<label commandName="deleteColumn" devLabel="Delete Selected Columns" translation="删除选定的列"/>
	<label commandName="deleteRevision" devLabel="Delete Revision" translation="删除修订"/>
	<label commandName="deleteRevisiontooltip" devLabel="Delete Selected Revision Row" translation="删除选定的修订行"/>
	<label commandName="deleteRow" devLabel="Delete Selected Rows" translation="删除选定的行"/>
	<label commandName="department" devLabel="Dept." translation="部门"/>
	<label commandName="designFile" devLabel="Design File" translation="设计文件"/>
	<label commandName="displayAllInTable" devLabel="All" translation="全部"/>
	<label commandName="displayCustomInTable" devLabel="Custom" translation="自定义"/>
	<label commandName="displayFiveInTable" devLabel="05" translation="05"/>
	<label commandName="displayFourInTable" devLabel="04" translation="04"/>
	<label commandName="displayOneInTable" devLabel="01" translation="01"/>
	<label commandName="displayThreeInTable" devLabel="03" translation="03"/>
	<label commandName="displayTwoInTable" devLabel="02" translation="02"/>
	<label commandName="drawingAanimationUnvalilableLCLZ" devLabel="Unavailable because %1% is an electronic design." translation="不可用，因为 %1% 是电子器件设计。"/>
	<label commandName="drawingAnimationLCLZ" devLabel="Creates a drawing to document the storyboard of the current design as an exploded view." translation="创建工程图来以分解视图的形式记录当前设计的故事板。"/>
	<label commandName="drawingAutomateLCLZ" devLabel="Automatically generate 2D drawings for the active design." translation="自动为活动设计生成二维工程图。"/>
	<label commandName="drawingDesignLCLZ" devLabel="Creates a drawing to document the current design." translation="创建工程图来记录当前设计。"/>
	<label commandName="drawingGeneralLCLZ" devLabel="Creates a set of sheets that document the active design with scaled 2D orthographic and isometric views, annotations, and tables to aid in manufacturing." translation="创建一套图纸，它们使用缩放的二维正交视图和等轴测视图、标注和表格来记录活动设计，以协助制造。"/>
	<label commandName="drawingTemplateLCLZ" devLabel="Creates a template that stores title blocks, borders, document settings, sheet settings, views, part lists, and text for use in future drawings." translation="创建模板，用来存储标题栏、边框、文档设置、图纸设置、视图、零件列表和文本，以便在将来的工程图中使用。"/>
	<label commandName="drawingUnavailable2LCLZ" devLabel="Unavailable because there is no active design. Open a design, then create a drawing." translation="不可用，因为没有活动设计。请打开设计，然后创建工程图。"/>
	<label commandName="drawingUnavailableEIPLCLZ" devLabel="Unavailable because Edit In Place is active the current design. Finish the Edit In Place session, then create a drawing." translation="当前设计处于在位编辑激活状态，此功能暂不可用。请完成在位编辑会话后再创建工程图。"/>
	<label commandName="drawingUnavailableLCLZ" devLabel="Unavailable because the active design is a drawing. Open a design, then create a drawing." translation="不可用，因为活动设计是工程图。请打开设计，然后创建工程图。"/>
	<label commandName="dwgExtension" devLabel=".dwg" translation=".dwg"/>
	<label commandName="dxfExtension" devLabel=".dxf" translation=".dxf"/>
	<label commandName="editColumns" devLabel="Edit Columns" translation="编辑列"/>
	<label commandName="editRows" devLabel="Edit Rows" translation="编辑行"/>
	<label commandName="electronicsDesignNotOpen" devLabel="Electronics Design is not open" translation="电子器件设计未打开"/>
	<label commandName="ellipse" devLabel="Ellipse" translation="椭圆"/>
	<label commandName="fd_buttonAbort" devLabel="Abort" translation="中止"/>
	<label commandName="fd_buttonIgnore" devLabel="Ignore" translation="忽略"/>
	<label commandName="fd_buttonRetry" devLabel="Retry" translation="重试"/>
	<label commandName="fd_button_continue" devLabel="Continue" translation="继续"/>
	<label commandName="fd_button_try_again" devLabel="Try Again" translation="重试"/>
	<label commandName="filletMaxRad" devLabel="Maximum fillet radius" translation="最大圆角半径"/>
	<label commandName="filletMinRad" devLabel="Minimum fillet radius" translation="最小圆角半径"/>
	<label commandName="ft" devLabel="ft" translation="英尺"/>
	<label commandName="half depth" devLabel="Measure Half Depth" translation="测量半深"/>
	<label commandName="in" devLabel="in" translation="in"/>
	<label commandName="infoBreakInheritance_All" devLabel="Inherit All" translation="全部继承"/>
	<label commandName="infoBreakInheritance_None" devLabel="Inherit None" translation="不继承"/>
	<label commandName="infoBreakInheritance_Visible" devLabel="Inherit Visible" translation="继承可见"/>
	<label commandName="insertColumnToLeft" devLabel="Insert Columns To Left" translation="在左侧插入列"/>
	<label commandName="insertColumnToRight" devLabel="Insert Columns To Right" translation="在右侧插入列"/>
	<label commandName="insertRowAbove" devLabel="Insert Rows Above" translation="在上方插入行"/>
	<label commandName="insertRowBelow" devLabel="Insert Rows Below" translation="在下方插入行"/>
	<label commandName="itemAddBreak" devLabel="Add Break" translation="添加折断"/>
	<label commandName="itemDown" devLabel="Down" translation="向下"/>
	<label commandName="itemRemoveBreak" devLabel="Remove Break" translation="删除折断"/>
	<label commandName="itemUP" devLabel="Up" translation="向上"/>
	<label commandName="justify" devLabel="Justify" translation="对齐"/>
	<label commandName="layerStackTableCmd" devLabel="Layer Stack Table" translation="层叠表"/>
	<label commandName="layerStackTableCmdBlock" devLabel="Layer Stack Table (unavailable)" translation="层叠表(不可用)"/>
	<label commandName="layerStackTableCmdBlockToolTip" devLabel="Layer Stack Table is not available when there is no linked 2D PCB in the Electronics Design. &#xA;To use electronics data in a drawing, first link a 2D PCB to the Electronics Design." translation="当电子器件设计中不存在链接的二维 PCB 时，层叠表不可用。&#xA;若要在工程图中使用电子器件数据，请先将二维 PCB 链接到电子器件设计。"/>
	<label commandName="layerStackTableCmdToolTip" devLabel="Creates a table based on the PCB Layer Stack.&#xA;Select between Layer Stack and Via Pairs, name the table, then adjust table columns. Leader lines are automatically added to associated diagram." translation="基于 PCB 层叠创建表格。&#xA;在层叠和过孔对之间进行选择，为表格命名，然后调整表格列。引线会自动添加到相关图表中。"/>
	<label commandName="layerStackViewCmd" devLabel="Layer Stack View" translation="层叠视图"/>
	<label commandName="layerStackViewCmdBlock" devLabel="Layer Stack View (unavailable)" translation="层叠视图(不可用)"/>
	<label commandName="layerStackViewCmdBlockToolTip" devLabel="Layer Stack View is not available when there is no linked 2D PCB in the Electronics Design. &#xA;&#xA;To use electronics data in a drawing, first link a 2D PCB to the Electronics Design." translation="当电子器件设计中没有链接的二维 PCB 时，层叠视图不可用。&#xA;&#xA;若要在图形中使用电子器件数据，请先将二维 PCB 链接到电子器件设计。"/>
	<label commandName="layerStackViewCmdToolTip" devLabel="Creates a view based on the PCBLayer Stack. Shows all layers of PCB and via pairs in abstract view. &#xA;&#xA;Place the view on the sheet. Can be used in combination with Layer Stack Table." translation="基于 PCB 层叠创建视图。以抽象视图显示 PCB 和过孔对的所有层。&#xA;&#xA;将视图放置在图纸上。可与层叠表结合使用。"/>
	<label commandName="lclzAddSheet" devLabel="Quick Add" translation="快速添加"/>
	<label commandName="lclzAlreadyIsUse" devLabel="The name &quot;%1%&quot; is already is use. &#xA; You will need to enter a different name." translation="名称“%1%”已在使用中。 &#xA; 您需要输入其他名称。"/>
	<label commandName="lclzAskIfNeedToGetLatest" devLabel="Version mismatch. Get Latest to proceed with view placement?" translation="版本不匹配。是否使用“获取最新版本”以继续放置视图？"/>
	<label commandName="lclzAskIfNeedToGetLatest_ccy" devLabel="Change mismatch. Get Latest to proceed with view placement?" translation="更改不匹配。是否使用“获取最新版本”以继续放置视图？"/>
	<label commandName="lclzAssign" devLabel="Assign" translation="指定"/>
	<label commandName="lclzAutomation" devLabel="Automation" translation="自动化"/>
	<label commandName="lclzBorderPalette" devLabel="Border" translation="边框"/>
	<label commandName="lclzBorderTab" devLabel="BORDER" translation="边框"/>
	<label commandName="lclzBreakViewDesc" devLabel="For better visibility, drag the break line grips to extend the break line. To delete the break, click to select either of the break lines and press the Delete key." translation="为了获得更好的可见性，请拖动打断线夹点以延伸打断线。若要删除打断线，请单击以选择两条打断线中的任意一条，然后按 Delete 键。"/>
	<label commandName="lclzBreakViewTips" devLabel="To modify the break, click to select either of the break lines and drag to reposition. When you reposition the break lines, the view on either side of the break adjusts accordingly." translation="若要修改打断，请单击以选择两条打断线中的任意一条并拖动以重新定位。当重新定位打断线时，打断线任一侧的视图将相应地调整。"/>
	<label commandName="lclzBreakViewTipsAndTricksTitle" devLabel="Break View Information" translation="打断视图信息"/>
	<label commandName="lclzBrowse" devLabel="Browse..." translation="浏览..."/>
	<label commandName="lclzCalculating" devLabel="Calculating" translation="正在计算"/>
	<label commandName="lclzCannotFindTemplate" devLabel="The selected drawing template cannot be found." translation="找不到选定的工程图模板。"/>
	<label commandName="lclzChangeSheetSettingDesc" devLabel="You can create as many title blocks as you need and switch between them. You can also toggle the border and title block on or off independently." translation="可以根据需要创建任意数量的标题栏，并在它们之间切换。也可以单独打开或关闭边框和标题栏。"/>
	<label commandName="lclzChangeSheetSettingTips" devLabel="Change the sheet size and title block for the current drawing." translation="更改当前工程图的图纸大小和标题栏。"/>
	<label commandName="lclzChangeSheetSettingTipsAndTricksTitle" devLabel="Sheet Settings Information" translation="图纸设置信息"/>
	<label commandName="lclzConstraints" devLabel="Constraints" translation="约束"/>
	<label commandName="lclzContainsUnsupportedChars" devLabel="The name contains unsupported characters" translation="名称包含不支持的字符"/>
	<label commandName="lclzCreate" devLabel="Create" translation="创建"/>
	<label commandName="lclzCurrentDrawing" devLabel="Current Drawing" translation="当前工程图"/>
	<label commandName="lclzCustomSketchSymbol" devLabel="Sketch Symbol" translation="草图符号"/>
	<label commandName="lclzDefaultDocumentName" devLabel="Untitled" translation="无标题"/>
	<label commandName="lclzDimensions" devLabel="Dimensions" translation="尺寸"/>
	<label commandName="lclzDrawingAutomationPreferenceCmd1" devLabel="Lets you set automation for this drawing template. Control view placement, dimensions, and sheet creation." translation="用于设置此工程图模板的自动化。可以控制视图放置、尺寸和图纸创建。"/>
	<label commandName="lclzDrawingAutomationPreferenceCmd2" devLabel="Templates with placed views have only Auto Dimension preferences." translation="已放置视图的模板仅具有“自动标注”首选项。"/>
	<label commandName="lclzDrawingShowChangeAwarenessToolbarCmdText" devLabel="Change Summary" translation="更改概要"/>
	<label commandName="lclzDrawingTemplate" devLabel="Drawing Template" translation="工程图模板"/>
	<label commandName="lclzDrawingType" devLabel="Drawing Type" translation="工程图类型"/>
	<label commandName="lclzDrawingsPropertyRefresh" devLabel="Refresh all the properties placed in drawing." translation="刷新放置在图形中的所有特性。"/>
	<label commandName="lclzECADNewDrawingDocumentCommand1" devLabel="Creates a drawing of the electronics design." translation="创建电子器件设计的工程图。"/>
	<label commandName="lclzECADNewDrawingDocumentCommand2" devLabel="Place a view of the PCB. Place a diagram and table for the PCB Layer Stack." translation="放置 PCB 的视图。放置 PCB 层叠的图表和表格。"/>
	<label commandName="lclzElectronicsCreate" devLabel="Create" translation="创建"/>
	<label commandName="lclzElectronicsTab" devLabel="ELECTRONICS" translation="电子器件"/>
	<label commandName="lclzElectronicsTables" devLabel="Tables" translation="表格"/>
	<label commandName="lclzExport" devLabel="Export" translation="导出"/>
	<label commandName="lclzExportFusionDrawingDXFDocument1" devLabel="Creates a DXF file of the current drawing." translation="创建当前工程图的 DXF 文件。"/>
	<label commandName="lclzExportFusionDrawingDocument1" devLabel="Creates a DWG file of the current drawing." translation="创建当前工程图的 DWG 文件。"/>
	<label commandName="lclzExportFusionDrawingTemplate1" devLabel="Creates a drawing template of the current drawing configuration that can be used when creating new drawings." translation="创建当前工程图配置的工程图模板，在创建新工程图时可以使用此模板。"/>
	<label commandName="lclzExportFusionDrawingTemplate2" devLabel="A template retains the current drawing's drafting standard, annotation and sheet settings, title block, and border. All drawing views, associated annotations, and parts lists are removed." translation="模板会保留当前工程图的绘图标准、注释和图纸设置、标题栏以及边框。所有工程视图、关联的注释和明细表都将被删除。"/>
	<label commandName="lclzFDWGConstraintCoincident1" devLabel="Constrains the position of two points or a point and a line or a curve together" translation="将两个点或一个点与一条直线或曲线的位置约束在一起"/>
	<label commandName="lclzFDWGConstraintCoincident2" devLabel="This could be a point constrained along a line, two points constrained to each other, or a point constrained along a curve." translation="这可能是一个点沿直线受到约束、两个点相互受到约束或一个点沿曲线受到约束。"/>
	<label commandName="lclzFDWGConstraintCollinear1" devLabel="Constrains two or more objects so that they share a common line." translation="约束两个或多个对象，使它们共享一条公共线。"/>
	<label commandName="lclzFDWGConstraintCollinear2" devLabel="This could be a line and a rectangle, where the line and one edge of the rectangle lie along the same line." translation="这可能是一条直线和一个矩形，其中直线和矩形的一条边位于同一条直线上。"/>
	<label commandName="lclzFDWGConstraintConcentric" devLabel="Constrains two or more arcs, circles, or ellipses to the same center point." translation="将两个或多个圆弧、圆或椭圆约束在同一中心点上。"/>
	<label commandName="lclzFDWGConstraintEqual" devLabel="Constrains similar objects so that their sizes are identical. When the size of one object changes, the others adjust, too." translation="约束相似对象，使它们的大小相同。当一个对象的尺寸发生变化时，其他对象也会随之调整。"/>
	<label commandName="lclzFDWGConstraintFix" devLabel="Locks the size and location of a point or an object." translation="锁定点或对象的大小和位置。"/>
	<label commandName="lclzFDWGConstraintParallel" devLabel="Constrains two lines so that they extend in the same direction and never intersect." translation="约束两条直线，使它们在同一方向上延伸且永不相交。"/>
	<label commandName="lclzFDWGConstraintPerpendicular" devLabel="Constrains two objects so that they lie perpendicular (at a 90-degree angle) to each other." translation="约束两个对象，使它们彼此垂直(成 90 度角)。"/>
	<label commandName="lclzFDWGConstraintSymmetry" devLabel="Constrains two or more objects so that they are symmetrical (identical to each other in relation to a common axis)." translation="约束两个或更多对象，使它们保持对称(相对于公共轴，彼此完全相同)。"/>
	<label commandName="lclzFDWGGcHorizontalVerticalCommand" devLabel="Constrains a single line on either a vertical or horizontal axis, whichever is closer to the current alignment." translation="将一条直线约束在垂直轴或水平轴(无论哪个轴更接近于当前对齐方式)上。"/>
	<label commandName="lclzFDWGGcTangentCommand" devLabel="Constrains a curve and another object so that they touch at a single point but never cross each other. " translation="约束一条曲线和另一个对象，使它们在一个点处接触，但永远不会彼此相交。 "/>
	<label commandName="lclzFinishBlock" devLabel="Finish Title Block" translation="完成标题栏"/>
	<label commandName="lclzFinishBorder" devLabel="Finish Border" translation="完成边框"/>
	<label commandName="lclzFinishEdit" devLabel="Finish Title Block" translation="完成标题栏"/>
	<label commandName="lclzFinishSketch" devLabel="Finish Sketch" translation="完成草图"/>
	<label commandName="lclzFinishSketchSymbol" devLabel="Finish Sketch Symbol" translation="完成草图符号"/>
	<label commandName="lclzFusionChangeDocSettingCommandTipsDesc" devLabel="When you create a new drawing using the From Scratch option, default document settings are based on the preferences you set in the Fusion 360 Preferences dialog.Some document settings are read-only, because they're inherited from the design, controlled by the drafting standard, or can only be specified when you first create a drawing." translation="使用“从头开始”选项创建新工程图时，默认文档设置将基于您在 Fusion 360“首选项”对话框中设置的首选项。有些文档设置是只读的，因为它们继承自设计、由绘图标准控制，或只能在首次创建工程图时指定。"/>
	<label commandName="lclzFusionChangeDocSettingCommandTipsDesc1" devLabel="When you create a new drawing using the From Scratch option, default document settings are based on the preferences you set in the Fusion 360 Preferences dialog.Some document settings are read-only, because they're inherited from the design, controlled by the drafting standard, or can only be specified when you first create a drawing." translation="使用“从头开始”选项创建新工程图时，默认文档设置将基于您在 Fusion 360“首选项”对话框中设置的首选项。有些文档设置是只读的，因为它们继承自设计、由绘图标准控制，或只能在首次创建工程图时指定。"/>
	<label commandName="lclzFusionChangeDocSettingCommandTipsTips" devLabel="Click through the tabs to view or change standard, units, text, dimension, line width settings, and object properties such as line type and color for the current drawing." translation="单击相应选项卡可查看或更改当前工程图的标准、单位、文字、尺寸、线宽设置以及对象特性(例如线型和颜色)。"/>
	<label commandName="lclzFusionChangeDocSettingCommandTipsTips1" devLabel="Click through the tabs to view or change standard, units, text, dimension, line width settings, and object properties such as line type and color for the current drawing." translation="单击相应选项卡可查看或更改当前工程图的标准、单位、文字、尺寸、线宽设置以及对象特性(例如线型和颜色)。"/>
	<label commandName="lclzFusionChangeDocSettingCommandTipsTitle" devLabel="Document Settings Information" translation="文档设置信息"/>
	<label commandName="lclzFusionChangeDocSettingCommandTipsTitle1" devLabel="Document Settings Information" translation="文档设置信息"/>
	<label commandName="lclzFusionConfigTable2" devLabel="Displays Configuration Table data from Design on a sheet in a Drawing." translation="在工程图的图纸上显示来自设计的配置表数据。"/>
	<label commandName="lclzFusionConfigTable3" devLabel="Add Configured Aspects like feature parameters and physical material from the Configuration Table in Design" translation="从设计中的配置表添加已配置的方面，例如特征参数和物理材料。"/>
	<label commandName="lclzFusionDocMinMaxDimensionCmd1" devLabel="Measures the minimum or maximum distance from edge to curve or curve to curve." translation="测量从边到曲线或从曲线到曲线的最小距离或最大距离。"/>
	<label commandName="lclzFusionDocMinMaxDimensionCmd2" devLabel="For curve selection, start point reference for minimum and maximum distance is based on where you click on the curve." translation="对于曲线选择，最小距离和最大距离的起点参考基于您在曲线上单击的位置。"/>
	<label commandName="lclzFusionDocMinMaxDimensionCmd3" devLabel="Select Curve X/Y Min/Max snap points to measure the overall length of the curve horizontally or vertically." translation="选择“曲线 X/Y 最小值/最大值”捕捉点可水平或垂直测量曲线的总长。"/>
	<label commandName="lclzFusionDocShowHistoryForDrawingToolbarCommandText" devLabel="Drawing History" translation="工程图历史记录"/>
	<label commandName="lclzFusionDocTab" devLabel="DRAWING" translation="工程图"/>
	<label commandName="lclzFusionDrawingAddSheetTips" devLabel="Add a new sheet which by default inherits the properties of the active sheet, or select the desired options. " translation="添加默认继承活动图纸特性的新图纸，或选择所需的选项。 "/>
	<label commandName="lclzFusionDrawingAddSheetTipsDesc" devLabel="Right-click anywhere within the sheet bar to add a new sheet there." translation="在图纸栏中的任意位置单击鼠标右键可在该位置添加新图纸。"/>
	<label commandName="lclzFusionDrawingAddSheetTitle" devLabel="Add Sheet Information" translation="添加图纸信息"/>
	<label commandName="lclzFusionDrawingAlignBalloon1" devLabel="Aligns existing balloons and bend identifiers." translation="对齐现有引出序号和折弯标识符。"/>
	<label commandName="lclzFusionDrawingAlignBalloon2" devLabel="Select all balloons or bend identifiers to align, specify the first point, then specify a second point. The balloons or bend identifiers are distributed equally between the two points." translation="选择要对齐的所有引出序号或折弯标识符，指定第一个点，然后指定第二个点。引出序号或折弯标识符将均匀分布在这两个点之间。"/>
	<label commandName="lclzFusionDrawingAlignedDimension1" devLabel="Measures the precise distance between two points. Create dimensions that are parallel to the locations or objects that you specify." translation="测量两点之间的精确距离。创建与您指定的位置或对象平行的尺寸标注。"/>
	<label commandName="lclzFusionDrawingAngularDimension1" devLabel="Measures the angle of a rounded edge or the angle between two points or edges." translation="测量圆边的角度，或者两个点或两条边所成夹角的角度。"/>
	<label commandName="lclzFusionDrawingArc1" devLabel="Creates an arc using 3 points." translation="使用三个点创建圆弧。"/>
	<label commandName="lclzFusionDrawingArc2" devLabel="Specify the arc's start point, middle point and end point." translation="指定圆弧的起点、中间点和终点。"/>
	<label commandName="lclzFusionDrawingArcDimension1" devLabel="Measures the distance along an arc or a polyline arc segment." translation="沿圆弧或多段线圆弧段测量距离。"/>
	<label commandName="lclzFusionDrawingArcDimension2" devLabel="Specify arc length dimension location, or right-click to select Full/Partial arc length from the context menu, then place the dimension." translation="指定弧长标注位置，或者单击鼠标右键以从关联菜单中选择“全弧长”/“部分弧长”，然后放置标注。"/>
	<label commandName="lclzFusionDrawingArrow1" devLabel="Creates a leader within the sketch." translation="在草图内创建引线。"/>
	<label commandName="lclzFusionDrawingArrow2" devLabel="Specify the leader's start point, then its end point." translation="指定引线的起点，然后指定其终点。"/>
	<label commandName="lclzFusionDrawingAttribute1" devLabel="Specify a point then enter the attribute's prompt. When finished, click outside the text editor." translation="指定一个点，然后输入属性的提示。完成后，在文本编辑器外部单击。"/>
	<label commandName="lclzFusionDrawingAutoDimText1" devLabel="Creates dimensions automatically." translation="自动创建标注。"/>
	<label commandName="lclzFusionDrawingAutoDimText2" devLabel="Select a dimensioning method, modify number of dimensions, datum point, and select alternate dimensions." translation="选择标注方法，修改标注数、基准点，然后选择替换标注。"/>
	<label commandName="lclzFusionDrawingAuxiliaryView1" devLabel="Creates a projected view that is aligned to an edge in a parent view." translation="创建与父视图中的边对齐的投影视图。"/>
	<label commandName="lclzFusionDrawingAuxiliaryView2" devLabel="Select an edge in a parent view, place the projected view, then adjust the view's style, scale and edge visibility." translation="在父视图中选择边，放置投影视图，然后调整视图的样式、比例和边可见性。"/>
	<label commandName="lclzFusionDrawingBalloon1" devLabel="Creates a balloon for the selected component." translation="为选定的零部件创建引出序号。"/>
	<label commandName="lclzFusionDrawingBalloon2" devLabel="Select a component's edge, then place the balloon." translation="选择零部件的边，然后放置引出序号。"/>
	<label commandName="lclzFusionDrawingBalloonRenumber1" devLabel="Renumbers existing balloons or bend identifiers and automatically updates associated parts lists and bend tables." translation="对现有引出序号或折弯标识符进行重新编号，并自动更新关联的明细栏和折弯表。"/>
	<label commandName="lclzFusionDrawingBalloonRenumber2" devLabel="Specify the starting number, then select balloons or bend identifiers in the order you want them to appear in the parts list or bend table. Renumbering is applied based on the order of selection." translation="指定起始编号，然后按照您希望它们在明细栏或折弯表中显示的顺序选择引出序号或折弯标识符。系统将根据选择顺序重新进行编号。"/>
	<label commandName="lclzFusionDrawingBaselineDimension1" devLabel="Select an existing linear dimension, then specify a point to create a new dimension." translation="选择现有的线性标注，然后指定一个点以创建新尺寸标注。"/>
	<label commandName="lclzFusionDrawingBaselineDimension2" devLabel="Continue specifying points to create multiple dimensions all originating from the same base point." translation="继续指定更多的点，创建以同一基点为起点的多个尺寸标注。"/>
	<label commandName="lclzFusionDrawingBendID1" devLabel="Creates a bend identifier for the selected bend centerline." translation="为选定的折弯中心线创建折弯标识符。"/>
	<label commandName="lclzFusionDrawingBendID2" devLabel="Select a bend centerline. The bend identifier is automatically placed without a leader above the centerline. To add a leader, drag the note away from the centerline." translation="选择折弯中心线。系统将自动放置该折弯标识符，而不在中心线上方放置引线。若要添加引线，请将注释拖离中心线。"/>
	<label commandName="lclzFusionDrawingBendNoteLeaderTipsDesc" devLabel="You can control the font style and text height for all annotations in the drawing by clicking Annotation Settings at the bottom of the drawing area." translation="单击绘图区域底部的“注释设置”，可以控制工程图中所有注释的字体样式和文本高度。"/>
	<label commandName="lclzFusionDrawingBendNoteLeaderTipsTips" devLabel="You can include special characters and symbols by entering a control code or a Unicode string." translation="通过输入控制代码或 Unicode 字符串，可以包含特殊字符和符号。"/>
	<label commandName="lclzFusionDrawingBendNoteLeaderTipsTitle" devLabel="NOTE INFORMATION" translation="注释信息"/>
	<label commandName="lclzFusionDrawingBendTable1" devLabel="Creates a bend table based on a sheet metal flat pattern reference." translation="根据钣金展开模式参考创建折弯表。"/>
	<label commandName="lclzFusionDrawingBendTable2" devLabel="Select a flat pattern view, then place the bend table on the sheet. Bend identifiers are automatically added to the view." translation="选择展开模式视图，然后将折弯表放置在图纸上。折弯标识符将自动添加到视图。"/>
	<label commandName="lclzFusionDrawingBlocCloseCommandTip1" devLabel="Closes the editor and returns to the drawing or drawing template." translation="关闭编辑器并返回到图形或图形模板。"/>
	<label commandName="lclzFusionDrawingBlockEditorImageInsert1" devLabel="Inserts the selected image into the current block definition." translation="将选定图像插入到当前块定义。"/>
	<label commandName="lclzFusionDrawingBreakoutSectionView1" devLabel="Removes a defined area of material to expose inner features in an existing drawing view." translation="移除定义的材料区域以显示现有工程视图中的内部特征。"/>
	<label commandName="lclzFusionDrawingBreakoutSectionView2" devLabel="Select a parent view, then specify the shape and depth of the area of material to remove." translation="选择父视图，然后指定要移除的材料区域的形状和深度。"/>
	<label commandName="lclzFusionDrawingBreakoutSectionViewTipsDesc" devLabel="To modify a Breakout Section View depth, hover over the outline and double-click or right-click to select the Edit Breakout Section View option. For modified design geometry, use Reset Start Point to move the start point to the front of the model for depth calculation. Breakout Section Views are inherited in projected isometric view." translation="若要修改局部剖视图深度，请将光标悬停在轮廓上，然后双击或单击鼠标右键以选择“编辑局部剖视图”选项。对于修改的设计几何图元，请使用“重置起点”将起点移至模型前面以进行深度计算。将在投影等轴测视图中继承局部剖视图。"/>
	<label commandName="lclzFusionDrawingBreakoutSectionViewTipsTips" devLabel="Create a cut shape profile on an orthographic view. When complete, define the cut depth, then click OK to generate the Breakout Section View." translation="在正交视图上创建剖切形状轮廓。完成后，定义剖切深度，然后单击“确定”以生成局部剖视图。"/>
	<label commandName="lclzFusionDrawingBreakoutSectionViewTipsTitle" devLabel="Breakout Section View Information" translation="局部剖视图信息"/>
	<label commandName="lclzFusionDrawingBrokenView1" devLabel="Shortens an existing view by removing a portion of the design." translation="通过删除设计的某个部分来缩短现有视图。"/>
	<label commandName="lclzFusionDrawingBrokenView2" devLabel="Select a parent view, select horizontal or vertical, specify the start of the break, then specify the end of the break. The portion of the design between the breaks is removed." translation="选择父视图，选择水平或垂直，指定打断的起点，然后指定打断的终点。打断之间的设计部分将被删除。"/>
	<label commandName="lclzFusionDrawingCenterPattern1" devLabel="Select rounded edges, such as holes or fillets. A center mark pattern including a PCD is created." translation="选择圆边，例如孔或圆角。包含 PCD 的中心标记阵列即被创建。"/>
	<label commandName="lclzFusionDrawingCenterPatternEdit1" devLabel="Select an existing centermark pattern for editing." translation="选择现有中心标记模式进行编辑。"/>
	<label commandName="lclzFusionDrawingCenterPatternTipsDesc" devLabel="A Reference Edge has to be selected while creating a center mark pattern for a slot." translation="创建槽的中心标记阵列时必须选择一条参考边。"/>
	<label commandName="lclzFusionDrawingCenterPatternTipsTips" devLabel="Select the edges of features (e.g. holes) in the appropriate order to form the required center mark pattern. The Auto-complete checkbox is checked by default. The Center Mark Pattern is created automatically when you click just one hole or rounded edge." translation="按照适当的顺序选择特征(例如孔)的边以形成所需的中心标记阵列。“自动完成”复选框默认处于选中状态。您只需单击一个孔或一条圆边即可自动创建中心标记阵列。"/>
	<label commandName="lclzFusionDrawingCenterPatternTipsTitle" devLabel="Center Mark Pattern Information" translation="中心标记阵列信息"/>
	<label commandName="lclzFusionDrawingCenterline1" devLabel="Select two straight edges. The centerline is created between them." translation="选择两条直边。将在它们之间创建中心线。"/>
	<label commandName="lclzFusionDrawingCentermark1" devLabel="Select a rounded edge, such as a fillet, hole, sphere, or cylinder." translation="选择圆边，如圆角、孔、球体或圆柱体。"/>
	<label commandName="lclzFusionDrawingChainDimension1" devLabel="Select an existing linear dimension, then specify a point to create a new dimension." translation="选择现有的线性标注，然后指定一个点以创建新尺寸标注。"/>
	<label commandName="lclzFusionDrawingChainDimension2" devLabel="Continue specifying points to create multiple side-by-side dimensions." translation="继续指定更多的点，创建多个并排的尺寸标注。"/>
	<label commandName="lclzFusionDrawingCircle1" devLabel="Creates a circle using its center point and radius." translation="使用圆心和半径创建一个圆。"/>
	<label commandName="lclzFusionDrawingCircle2" devLabel="Specify the circle's center point, then specify a second point to define its radius." translation="指定圆的圆心，然后指定另一个点以定义其半径。"/>
	<label commandName="lclzFusionDrawingConfigTableEdit" devLabel="Edits a Configuration history." translation="编辑配置历史记录。"/>
	<label commandName="lclzFusionDrawingConfigTableEditTipsDesc" devLabel="To replace a dimension value with the configured aspect name, right‑click the dimension and choose Replace with Configured Aspect. Or use the Dimensions dropdown on the toolbar and select Replace with Configured Aspect. You can also double‑click the dimension, then under Replace Dimension Text, choose the desired configured aspect." translation="若要将尺寸值替换为已配置的方面名称，请在该尺寸上单击鼠标右键，然后选择“替换为已配置的方面”。或者，使用工具栏上的“尺寸”下拉菜单，选择“替换为已配置的方面”。您也可以双击该尺寸，然后在“替换尺寸文本”下选择所需的已配置方面。"/>
	<label commandName="lclzFusionDrawingConfigTableEditTipsTips" devLabel="Edit the title of the configuration table as needed. Select which configured aspects to show as table columns. To change column order, open the Column Order tab. Click the Up arrow to move the selected column left. Click the Down arrow to move the selected column right." translation="根据需要编辑配置表的标题。选择要作为表格列显示的已配置方面。若要更改列的顺序，请打开“列顺序”选项卡。单击“向上”箭头可将所选列向左移动。单击“向下”箭头可将所选列向右移动。"/>
	<label commandName="lclzFusionDrawingConfigTableEditTipsTitle" devLabel="Configuration Table Information" translation="配置表信息"/>
	<label commandName="lclzFusionDrawingCopy1" devLabel="Select objects to copy, specify a base point, then specify a second point to define the copy's location." translation="选择要复制的对象，指定基点，然后指定另一个点以定义副本的位置。"/>
	<label commandName="lclzFusionDrawingCreateFromComponentsTipsDesc" devLabel="For more control over drawing defaults, make adjustments in Preferences in your User Name drop-down in the top right." translation="为了更好地控制工程图的默认设置，请在右上角“用户名”下拉列表中的“首选项”中进行调整。"/>
	<label commandName="lclzFusionDrawingCreateFromComponentsTipsTips" devLabel="Standard and Units cannot be changed once a drawing is created. Sheet size, however, can be adjusted at any time in Sheet Settings." translation="创建工程图后，将无法更改标准和单位。但是，可以在“图纸设置”中随时调整图纸尺寸。"/>
	<label commandName="lclzFusionDrawingCreateFromComponentsTipsTitle" devLabel="Create Drawing Information" translation="创建工程图信息"/>
	<label commandName="lclzFusionDrawingCreatePartsList1" devLabel="Generates a parts list of the model associated to the drawing." translation="生成与工程图相关的模型的明细表。"/>
	<label commandName="lclzFusionDrawingCreateSketchSymbol1" devLabel="Enters Sketch mode, where you can create a sketch symbol." translation="进入“草图”模式，您可以在其中创建草图符号。"/>
	<label commandName="lclzFusionDrawingCropView1" devLabel="Removes an unwanted portion of the view image." translation="删除视图图像中不需要的部分。"/>
	<label commandName="lclzFusionDrawingCropView2" devLabel="Select a view and drag the crop window." translation="选择视图并拖动裁剪窗口。"/>
	<label commandName="lclzFusionDrawingCropViewTipsDesc" devLabel="You can choose the type, line width, and color for the crop view outline in the Document Settings under the View tab’s More Options. When a view is cropped, the show/hide outline option becomes available in the Drawing View dialog." translation="您可以在“视图”选项卡“更多选项”下的“文档设置”中选择裁剪视图轮廓的类型、线宽和颜色。裁剪视图时，“工程视图”对话框中的“显示/隐藏轮廓”选项将变得可用。"/>
	<label commandName="lclzFusionDrawingCropViewTipsTips" devLabel="Crop a view to remove an unwanted portion of the view image. You can crop a view only once." translation="裁剪视图可删除视图图像中不需要的部分。一个视图只能裁剪一次。"/>
	<label commandName="lclzFusionDrawingCropViewTipsTitle" devLabel="Crop View Information" translation="裁剪视图信息"/>
	<label commandName="lclzFusionDrawingDatumId1" devLabel="Creates a datum identifier." translation="创建基准标识符号。"/>
	<label commandName="lclzFusionDrawingDatumId2" devLabel="Select an edge, dimension extension line or feature control frame, place the datum identifier, then add an identifier and notes." translation="选择边、尺寸界线或形位公差符号，放置基准标识符号，然后添加标识符号和注释。"/>
	<label commandName="lclzFusionDrawingDatumIdTipsDesc" devLabel="To create a surface symbol in an ISO drawing, select an object, right-click to activate the marking menu, and select Surface." translation="若要在 ISO 工程图中创建曲面符号，请选择一个对象，单击鼠标右键以激活标记菜单，然后选择“曲面”。"/>
	<label commandName="lclzFusionDrawingDatumIdTipsTips" devLabel="Symbols can be added from the text field in the drop-down menu." translation="可以从下拉菜单中的文本字段添加符号。"/>
	<label commandName="lclzFusionDrawingDatumIdTipsTitle" devLabel="Datum Identifier Information" translation="基准标识符号信息"/>
	<label commandName="lclzFusionDrawingDiameterDimension1" devLabel="Select a rounded edge, such as a fillet, hole, sphere, or cylinder, then place the dimension." translation="选择圆边，如圆角、孔、球体或圆柱体，然后放置尺寸标注。"/>
	<label commandName="lclzFusionDrawingDimensionArrangeCmd1" devLabel="Arranges linear or angular dimensions." translation="排列线性标注或角度标注。"/>
	<label commandName="lclzFusionDrawingDimensionArrangeCmd2" devLabel="Select a base dimension, then select dimensions to stack or align with the base dimension." translation="选择基准标注，然后选择要与基准标注堆叠或对齐的标注。"/>
	<label commandName="lclzFusionDrawingDimensionArrangeCmdTANDTDesc" devLabel="You can align dimensions across views if needed. To do so, select the base dimension on the first view and the dimensions to align on the second view." translation="如果需要，可以跨视图对齐标注。为此，请在第一个视图中选择基准标注，然后在第二个视图中选择要对齐的标注。"/>
	<label commandName="lclzFusionDrawingDimensionArrangeCmdTANDTId" devLabel="Arrange Dimension Information" translation="排列标注信息"/>
	<label commandName="lclzFusionDrawingDimensionArrangeCmdTANDTTips" devLabel="When stacking dimensions, the default spacing is calculated as 3 x Medium Text Height (as shown in Document Settings). This prevents overlaps from occurring when tolerances exist." translation="堆叠标注时，默认间距的计算方式为 3 x 中等文本高度(如“文档设置”中所示)。在存在公差的情况下，这可防止发生重叠。"/>
	<label commandName="lclzFusionDrawingDimensionBreak" devLabel="Select existing dimensions or leaders, then add or remove breaks where they overlap other dimensions and leaders." translation="选择现有的尺寸标注或引线，然后在它们与其他尺寸标注或引线重叠的位置添加或删除折断。"/>
	<label commandName="lclzFusionDrawingDimensionBreakTipsDesc" devLabel="Dimension Break breaks the selected intersecting dimensions at the intersection points. You can also add a Dimension Break to other objects like Balloons, Bend Identifiers, and Leaders." translation="“标注折断”会在交点处折断选定的相交尺寸标注。您也可以向其他对象(例如引出序号、折弯标识符和引线)添加“标注折断”。"/>
	<label commandName="lclzFusionDrawingDimensionBreakTipsTips" devLabel="Right-click on selected dimesnions to create Dimension Breaks." translation="在选定的尺寸标注上单击鼠标右键以创建“标注折断”。"/>
	<label commandName="lclzFusionDrawingDimensionBreakTipsTitle" devLabel="Dimension Break Information" translation="标注折断信息"/>
	<label commandName="lclzFusionDrawingDimensionEdit1" devLabel="Select a dimension to modify its properties." translation="选择尺寸标注以修改其特性。"/>
	<label commandName="lclzFusionDrawingDimensionEditConfigProperty1" devLabel="Filter by Placed Configuration Tables" translation="按放置的配置表过滤"/>
	<label commandName="lclzFusionDrawingDimensionEditConfigProperty2" devLabel="Filters the list to aspects from configuration tables placed in the drawing (any sheet). If none are placed, the list shows all aspects from the design configuration table." translation="将列表过滤为放置在工程图(任何图纸)中的配置表中的方面。如果未放置任何配置表，该列表将显示设计配置表中的所有特征。"/>
	<label commandName="lclzFusionDrawingDimensionEditTipsDesc" devLabel="You can restore default properties if you modify the precision, alternate units, or tolerance type. Select the dimension, right-click to access the marking menu, and select Restore Defaults." translation="如果修改精度、换算单位或公差类型，您可以恢复默认特性。选择尺寸，单击鼠标右键以访问标记菜单，然后选择“恢复默认设置”。"/>
	<label commandName="lclzFusionDrawingDimensionEditTipsTips" devLabel="To change the settings for all dimensions on a sheet, use Annotation Settings at the bottom of the drawing area." translation="若要更改图纸上所有尺寸的设置，请使用绘图区域底部的“标注设置”。"/>
	<label commandName="lclzFusionDrawingDimensionEditTipsTitle" devLabel="Dimension Edit Information" translation="尺寸编辑信息"/>
	<label commandName="lclzFusionDrawingEdgeExtension1" devLabel="Select two straight edges.  An edge extension is created for each edge that terminates at their intersection." translation="选择两条直边。将为在交点处终止的每条边创建边延伸。"/>
	<label commandName="lclzFusionDrawingEdgeSymbol1" devLabel="Creates an edge symbol." translation="创建边界符号。"/>
	<label commandName="lclzFusionDrawingEdgeSymbol2" devLabel="Select an edge, specify attributes for the symbol like direction,values, or flag the symbol as majority symbol." translation="选择一条边，指定符号的属性(如方向、值)，或将符号标记为多数符号。"/>
	<label commandName="lclzFusionDrawingEdgeSymbolTipsTips" devLabel="The properties available in the Command Dialog depend on the drafting standard in use." translation="“命令”对话框中可用的特性取决于使用的绘图标准。"/>
	<label commandName="lclzFusionDrawingEdgeSymbolTipsTitle" devLabel="Edge Information" translation="边信息"/>
	<label commandName="lclzFusionDrawingEditImage" devLabel="Edits the selected image into the current sheet." translation="在当前图纸中编辑选定的图像。"/>
	<label commandName="lclzFusionDrawingEllipse1" devLabel="Creates an ellipse defined by a center point, major axis and a point on the ellipse." translation="创建一个由中心点、长轴和椭圆上的一个点定义的椭圆。"/>
	<label commandName="lclzFusionDrawingEllipse2" devLabel="Select the center point of the ellipse. Select the second point to define the first axis. Select the third point to define a point on the ellipse." translation="选择椭圆的中心点。选择第二个点以定义第一条轴。选择第三个点以在椭圆上定义一个点。"/>
	<label commandName="lclzFusionDrawingEmptyLeader1" devLabel="Creates a leader note." translation="创建引线注释。"/>
	<label commandName="lclzFusionDrawingEmptyLeader2" devLabel="Select an edge, place the text, then enter and format text as required." translation="选择边，放置文本，然后根据需要输入文本并设置其格式。"/>
	<label commandName="lclzFusionDrawingEmptyLeaderTipsDesc" devLabel="You can control the font style and text height for all annotations in the drawing by clicking Annotation Settings at the bottom of the drawing area." translation="单击绘图区域底部的“注释设置”，可以控制工程图中所有注释的字体样式和文本高度。"/>
	<label commandName="lclzFusionDrawingEmptyLeaderTipsTips" devLabel="You can include special characters and symbols by entering a control code or a Unicode string." translation="通过输入控制代码或 Unicode 字符串，可以包含特殊字符和符号。"/>
	<label commandName="lclzFusionDrawingEmptyLeaderTipsTitle" devLabel="NOTE INFORMATION" translation="注释信息"/>
	<label commandName="lclzFusionDrawingErase1" devLabel="Select objects to delete, then press Enter." translation="选择要删除的对象，然后按 Enter 键。"/>
	<label commandName="lclzFusionDrawingEraseTipsDesc" devLabel="Deselect objects by holding Shift while dragging across or clicking objects." translation="按住 Shift 键的同时拖动光标越过对象或单击对象可取消选择对象。"/>
	<label commandName="lclzFusionDrawingEraseTipsTips" devLabel="Click and drag to select multiple objects. A selection box from left to right will select all objects completely within the box. A selection box from right to left will select all objects partially within the box." translation="单击并拖动可选择多个对象。从左向右拖曳出选择框可选择完全位于该框内的所有对象。从右向左拖曳出选择框可选择部分位于该框内的所有对象。"/>
	<label commandName="lclzFusionDrawingEraseTipsTitle" devLabel="Delete Information" translation="删除信息"/>
	<label commandName="lclzFusionDrawingExportDWGTips" devLabel="Hold either the Shift or Ctrl keys to select multiple sheets on the sheet bar to output a DWG." translation="按住 Shift 或 Ctrl 键以在图纸栏上选择多张图纸以输出 DWG。"/>
	<label commandName="lclzFusionDrawingExportDWGTitle" devLabel="Export DWG Information" translation="导出 DWG 信息"/>
	<label commandName="lclzFusionDrawingExportDxfTips" devLabel="Hold either the Shift or Ctrl keys to select multiple sheets on the sheet bar to output a DXF" translation="按住 Shift 键或 Ctrl 键可选择图纸栏上的多张图纸，在输出 DXF"/>
	<label commandName="lclzFusionDrawingExportDxfTitle" devLabel="Export DXF Information" translation="导出 DXF 信息"/>
	<label commandName="lclzFusionDrawingExportPDF1" devLabel="Creates a PDF file of the current drawing." translation="创建当前工程图的 PDF 文件。"/>
	<label commandName="lclzFusionDrawingExportPartsList1" devLabel="Creates a CSV file of the selected table" translation="创建选定表格的 CSV 文件"/>
	<label commandName="lclzFusionDrawingExportPdfTips" devLabel="Hold either the Shift or Ctrl keys to select multiple sheets on the sheet bar to output a PDF.&#xA;Check the Open PDF check box to open the PDF when the output is done." translation="按住 Shift 或 Ctrl 键可在图纸栏上选择多张图纸以输出 PDF。&#xA;选中“打开 PDF”复选框可在输出完成时打开 PDF。"/>
	<label commandName="lclzFusionDrawingExportPdfTitle" devLabel="Output PDF Information" translation="输出 PDF 信息"/>
	<label commandName="lclzFusionDrawingExtend1" devLabel="Select the objects to extend. All objects automatically become extension boundaries." translation="选择要延伸的对象。所有对象将自动变为延伸边界。"/>
	<label commandName="lclzFusionDrawingFeatureControlFrame1" devLabel="Creates a feature control frame symbol." translation="创建形位公差符号。"/>
	<label commandName="lclzFusionDrawingFeatureControlFrame2" devLabel="Select an edge or dimension extension line, place the feature control frame symbol, then add characteristics, tolerances and datums." translation="选择边或尺寸界线，放置形位公差符号，然后添加特征、公差和基准。"/>
	<label commandName="lclzFusionDrawingFeatureControlFrameTipsDesc" devLabel="To create a surface symbol in an ISO drawing, select an object, right-click to activate the marking menu, and select Surface." translation="若要在 ISO 工程图中创建曲面符号，请选择一个对象，单击鼠标右键以激活标记菜单，然后选择“曲面”。"/>
	<label commandName="lclzFusionDrawingFeatureControlFrameTipsTips" devLabel="Symbols can be added from the text field in the drop-down menu." translation="可以从下拉菜单中的文本字段添加符号。"/>
	<label commandName="lclzFusionDrawingFeatureControlFrameTipsTitle" devLabel="Feature Control Frame Information" translation="形位公差符号信息"/>
	<label commandName="lclzFusionDrawingFlipDimArrowCmd1" devLabel="Flips the direction of the selected dimension arrow." translation="翻转选定标注箭头的方向。"/>
	<label commandName="lclzFusionDrawingHatchEdit1" devLabel="Select a hatch to modify its properties." translation="选择图案填充以修改其特性。"/>
	<label commandName="lclzFusionDrawingHatchEditTipsDesc" devLabel="Each hatch has its own properties. You can only modify one hatch pattern at a time." translation="每个图案填充都有其自己的特性。一次只能修改一个填充图案。"/>
	<label commandName="lclzFusionDrawingHatchEditTipsTips" devLabel="Double-click a hatch to modify the hatch properties of a section view. Edit the hatch pattern, the scale factor, and the angle of the hatch pattern." translation="双击图案填充以修改剖视图的图案填充特性。编辑填充图案、比例系数和填充图案的角度。"/>
	<label commandName="lclzFusionDrawingHatchEditTipsTitle" devLabel="Hatch Edit Information" translation="图案填充编辑信息"/>
	<label commandName="lclzFusionDrawingHoleThreadNoteLeaderTipsDesc" devLabel="You can control the font style and text height for all annotations in the drawing by clicking Annotation Settings at the bottom of the drawing area." translation="单击绘图区域底部的“注释设置”，可以控制工程图中所有注释的字体样式和文本高度。"/>
	<label commandName="lclzFusionDrawingHoleThreadNoteLeaderTipsTips" devLabel="You can include special characters and symbols by entering a control code or a Unicode string." translation="通过输入控制代码或 Unicode 字符串，可以包含特殊字符和符号。"/>
	<label commandName="lclzFusionDrawingHoleThreadNoteLeaderTipsTitle" devLabel="NOTE INFORMATION" translation="注释信息"/>
	<label commandName="lclzFusionDrawingImageInsert1" devLabel="Inserts an image into the current sheet." translation="将图像插入当前图纸。"/>
	<label commandName="lclzFusionDrawingImageInsert2" devLabel="Select an image in insert, place the image, then format as required." translation="在“插入”中选择图像，放置该图像，然后根据需要设置格式。"/>
	<label commandName="lclzFusionDrawingInsertSketchSymbol1" devLabel="Inserts and manages sketch symbols." translation="插入和管理草图符号。"/>
	<label commandName="lclzFusionDrawingInsertSketchSymbol2" devLabel="Insert, rename, edit, and delete symbols from the list of sketched symbols. You can also import them from another drawing file or a template." translation="插入、重命名、编辑和删除草图符号列表中的符号。您也可以从其他工程图文件或模板导入它们。"/>
	<label commandName="lclzFusionDrawingJoggedRadialDimension1" devLabel="Creates a radius dimension of a circle, arc or polyline arc segment with the origin of the dimension and a jog at convenient locations." translation="使用标注的原点和在方便位置的折弯创建圆、圆弧或多段线圆弧段的半径标注。"/>
	<label commandName="lclzFusionDrawingJoggedRadialDimension2" devLabel="Specify the override location of the center, specify the location of the dimension line and specify the location of the jog, then place the dimension." translation="指定中心的替代位置、尺寸线的位置和折弯的位置，然后放置标注。"/>
	<label commandName="lclzFusionDrawingLabel1" devLabel="Creates numeric, alphabetic and custom labels. Specify the type, font and other properties of the label." translation="创建数字、字母和自定义标签。指定标签的类型、字体和其他特性。"/>
	<label commandName="lclzFusionDrawingLayerStackTableCmd1" devLabel="Creates a table based on the PCB Layer Stack." translation="根据 PCB 层叠创建表格。"/>
	<label commandName="lclzFusionDrawingLayerStackTableCmd2" devLabel="Select between Layer Stack and Via Pairs, name the table, then adjust table columns. Leader lines are automatically added to associated diagram." translation="在层叠和过孔对之间进行选择，为表格命名，然后调整表格列。引线会自动添加到相关图表中。"/>
	<label commandName="lclzFusionDrawingLayerStackTableTipsDesc" devLabel="To place both Layer Stack and Via Pairs tables, place each table with the desired option at a time." translation="若要同时放置层叠和过孔对表，请同时使用所需的选项放置每个表格。"/>
	<label commandName="lclzFusionDrawingLayerStackTableTipsTips" devLabel="When you place a table on the bottom half of the sheet, the column labels flip to the bottom of the table. To lock or unlock the table flipping feature, press the Shift Key." translation="将表格放在图纸的下半部分时，列标签会翻转到表格底部。若要锁定或解锁表格翻转功能，请按 Shift 键。"/>
	<label commandName="lclzFusionDrawingLayerStackTableTipsTitle" devLabel="LAYER STACK TABLE INFORMATION" translation="层叠表信息"/>
	<label commandName="lclzFusionDrawingLayerStackViewCmd1" devLabel="Creates a view based on the PCB Layer Stack. Shows all layers of PCB and via pairs in abstract view." translation="基于 PCB 层叠创建视图。以抽象视图显示 PCB 和过孔对的所有层。"/>
	<label commandName="lclzFusionDrawingLayerStackViewCmd2" devLabel="Place the view on the sheet. Can be used in combination with Layer Stack Table." translation="将视图放置在图纸上。可与层叠表结合使用。"/>
	<label commandName="lclzFusionDrawingLeaderBendNote1" devLabel="Creates a bend note." translation="创建折弯注释。"/>
	<label commandName="lclzFusionDrawingLeaderBendNote2" devLabel="Select a bend centerline. Bend information within the selected bend centerline is automatically added as text without a leader above the bend centerline." translation="选择折弯中心线。选定折弯中心线内的折弯信息将自动添加为文本，而不在折弯中心线上方添加引线。"/>
	<label commandName="lclzFusionDrawingLeaderBendNote3" devLabel="To add a leader, drag the note away from the centerline." translation="若要添加引线，请将注释拖离中心线。"/>
	<label commandName="lclzFusionDrawingLeaderHoleThreadNote1" devLabel="Creates a hole or thread note." translation="创建孔或螺纹注释。"/>
	<label commandName="lclzFusionDrawingLeaderHoleThreadNote2" devLabel="Select a hole or thread edge, then place the text. Hole and thread information within the selected edge is automatically added as text." translation="选择孔或螺纹边，然后放置文本。选定边内的孔和螺纹信息将自动添加为文本。"/>
	<label commandName="lclzFusionDrawingLeaderTipsDesc" devLabel="You can control the font style and text height for all annotations in the drawing by clicking Annotation Settings at the bottom of the drawing area." translation="单击绘图区域底部的“注释设置”，可以控制工程图中所有注释的字体样式和文本高度。"/>
	<label commandName="lclzFusionDrawingLeaderTipsTips" devLabel="You can include special characters and symbols by entering a control code or a Unicode string." translation="通过输入控制代码或 Unicode 字符串，可以包含特殊字符和符号。"/>
	<label commandName="lclzFusionDrawingLeaderTipsTitle" devLabel="NOTE INFORMATION" translation="注释信息"/>
	<label commandName="lclzFusionDrawingLine1" devLabel="Creates straight lines." translation="创建直线。"/>
	<label commandName="lclzFusionDrawingLine2" devLabel="Specify the line's start point, then specify a second point to define its angle and length." translation="指定直线的起点，然后指定另一个点以定义其角度和长度。"/>
	<label commandName="lclzFusionDrawingLinearDimension1" devLabel="Measures the horizontal or vertical distance between two points. Create dimensions by selecting an edge or by selecting two points." translation="测量两点之间的水平或垂直距离。通过选择一条边或两个点来创建尺寸标注。"/>
	<label commandName="lclzFusionDrawingMLeaderContentEdit1" devLabel="Specify the arrowhead location, specify the location of the text, then enter text. When finished, click outside the text editor." translation="指定箭头位置，指定文本的位置，然后输入文本。完成后，在文本编辑器以外的位置单击。"/>
	<label commandName="lclzFusionDrawingMLeaderContentEditTipsDesc" devLabel="You can control the font style and text height for all annotations in the drawing by clicking Annotation Tools at the bottom of the drawing area." translation="单击绘图区域底部的“注释工具”，可以控制工程图中所有注释的字体样式和文本高度。"/>
	<label commandName="lclzFusionDrawingMLeaderContentEditTipsTips" devLabel="You can include special characters and symbols by entering a control code or a Unicode string." translation="通过输入控制代码或 Unicode 字符串，可以包含特殊字符和符号。"/>
	<label commandName="lclzFusionDrawingMLeaderContentEditTipsTitle" devLabel="NOTE INFORMATION" translation="注释信息"/>
	<label commandName="lclzFusionDrawingMText1" devLabel="Creates a note." translation="创建注释。"/>
	<label commandName="lclzFusionDrawingMText2" devLabel="Specify opposing corners of the text box, then enter and format text as required." translation="指定文本框的对角点，然后根据需要输入文本并设置其格式。"/>
	<label commandName="lclzFusionDrawingMTextEdit1" devLabel="Creates a note." translation="创建注释。"/>
	<label commandName="lclzFusionDrawingMTextEdit2" devLabel="Specify opposing corners of the text box, then enter and format text as required." translation="指定文本框的对角点，然后根据需要输入文本并设置其格式。"/>
	<label commandName="lclzFusionDrawingMTextEditTipsDesc" devLabel="You can control the font style and text height for all annotations in the drawing by clicking Annotation Tools at the bottom of the drawing area." translation="单击绘图区域底部的“注释工具”，可以控制工程图中所有注释的字体样式和文本高度。"/>
	<label commandName="lclzFusionDrawingMTextEditTipsTips" devLabel="You can include special characters and symbols by entering a control code or a Unicode string." translation="通过输入控制代码或 Unicode 字符串，可以包含特殊字符和符号。"/>
	<label commandName="lclzFusionDrawingMTextEditTipsTitle" devLabel="TEXT INFORMATION" translation="文本信息"/>
	<label commandName="lclzFusionDrawingMTextTipsDesc" devLabel="You can control the font style and text height for all annotations in the drawing by clicking Annotation Settings at the bottom of the drawing area." translation="单击绘图区域底部的“注释设置”，可以控制工程图中所有注释的字体样式和文本高度。"/>
	<label commandName="lclzFusionDrawingMTextTipsTips" devLabel="You can include special characters and symbols by entering a control code or a Unicode string." translation="通过输入控制代码或 Unicode 字符串，可以包含特殊字符和符号。"/>
	<label commandName="lclzFusionDrawingMTextTipsTitle" devLabel="TEXT INFORMATION" translation="文本信息"/>
	<label commandName="lclzFusionDrawingManageSketchSymbol1" devLabel="Manages sketch symbols in your drawing template." translation="管理工程图模板中的草图符号。"/>
	<label commandName="lclzFusionDrawingManageSketchSymbol2" devLabel="Rename, edit, and delete symbols from the list of sketched symbols. You can also import them from another drawing file or a template." translation="重命名、编辑和删除草图符号列表中的符号。您也可以从其他工程图文件或模板导入它们。"/>
	<label commandName="lclzFusionDrawingMatchDimensionCmd1" devLabel="Match Dimension Configurations." translation="匹配标注配置。"/>
	<label commandName="lclzFusionDrawingMatchDimensionCmd2" devLabel="After selecting the source dimension with the configuration you want, select all the dimensions you want to apply the same configurations to." translation="选择具有所需配置的源标注后，选择要应用相同配置的所有标注。"/>
	<label commandName="lclzFusionDrawingMeasure1" devLabel="Reports distance, angle and positional data for the selected points." translation="报告选定点的距离、角度和位置数据。"/>
	<label commandName="lclzFusionDrawingMove1" devLabel="Select objects to move, then click Transform. Then specify a base point and a second point." translation="选择要移动的对象，单击“变换”，然后指定基点和另一个点。"/>
	<label commandName="lclzFusionDrawingMoveTipsDesc" devLabel="Deselect objects by holding Shift while dragging across or clicking objects." translation="按住 Shift 键的同时拖动光标越过对象或单击对象可取消选择对象。"/>
	<label commandName="lclzFusionDrawingMoveTipsTips" devLabel="Click and drag to select multiple objects. A selection box from left to right will select all objects completely within the box. A selection box from right to left will select all objects partially within the box." translation="单击并拖动可选择多个对象。从左向右拖曳出选择框可选择完全位于该框内的所有对象。从右向左拖曳出选择框可选择部分位于该框内的所有对象。"/>
	<label commandName="lclzFusionDrawingMoveTipsTitle" devLabel="Move Information" translation="移动信息"/>
	<label commandName="lclzFusionDrawingNewTable1" devLabel="Automatically creates a parts list with balloons, bend table with bend identifiers or custom table based on the contents of the current sheet or selected view." translation="根据当前图纸或选定视图的内容，自动创建带有引出序号的明细栏、带折弯标识符的折弯表或自定义表。"/>
	<label commandName="lclzFusionDrawingNewTable2" devLabel="Parts lists are created for component, assembly, and animation references. Bend tables are created for sheet metal flat pattern references." translation="明细栏针对零部件、部件和动画参考创建，而折弯表则针对钣金展开模式参考创建。"/>
	<label commandName="lclzFusionDrawingNewTableTemplate1" devLabel="Select a drawing view placeholder, then place the table. The table's type is determined by the view placeholder's reference." translation="选择工程视图占位符，然后放置表。表的类型由视图占位符的参考确定。"/>
	<label commandName="lclzFusionDrawingNewTableTemplate2" devLabel="Creates a parts list for single component, assembly or animation references, and a bend table for a sheet metal flat pattern references." translation="为单个零部件、部件或动画参考创建明细表，以及为钣金展开模式参考创建折弯表。"/>
	<label commandName="lclzFusionDrawingNewTableTipsDesc1" devLabel="When Type is set to Automatic, Fusion 360 determines the table type automatically, based on the contents of the current sheet. Parts lists are created for component, assembly, and animation references. Bend tables are created for sheet metal flat pattern references." translation="当“类型”设置为“自动”时，Fusion 360 将根据当前图纸的内容自动确定表格类型。明细表是为零部件、部件和动画参考创建的。折弯表是为钣金展开模式参考创建的。"/>
	<label commandName="lclzFusionDrawingNewTableTipsDesc2" devLabel="When Type is set to Automatic, Fusion 360 determines the table type automatically, based on the contents of the current sheet. Parts lists are created for component, assembly, and animation references. Bend tables are created for sheet metal flat pattern references." translation="当“类型”设置为“自动”时，Fusion 360 将根据当前图纸的内容自动确定表格类型。明细表是为零部件、部件和动画参考创建的。折弯表是为钣金展开模式参考创建的。"/>
	<label commandName="lclzFusionDrawingNewTableTipsDesc3" devLabel="When Type is set to Automatic, Fusion 360 determines the table type automatically, based on the contents of the current sheet. Parts lists are created for component, assembly, and animation references. Bend tables are created for sheet metal flat pattern references." translation="当“类型”设置为“自动”时，Fusion 360 将根据当前图纸的内容自动确定表格类型。明细表是为零部件、部件和动画参考创建的。折弯表是为钣金展开模式参考创建的。"/>
	<label commandName="lclzFusionDrawingNewTableTipsDesc4" devLabel="When Type is set to Automatic, Fusion 360 determines the table type automatically, based on the contents of the current sheet. Parts lists are created for component, assembly, and animation references. Bend tables are created for sheet metal flat pattern references." translation="当“类型”设置为“自动”时，Fusion 360 将根据当前图纸的内容自动确定表格类型。明细表是为零部件、部件和动画参考创建的。折弯表是为钣金展开模式参考创建的。"/>
	<label commandName="lclzFusionDrawingNewTableTipsDesc5" devLabel="To change the part number, part name, or description of a component, open the design in the Design workspace. In the browser, right-click the component, select Properties, and edit the properties in the dialog." translation="若要更改零部件的零件编号、零件名称或说明，请在“设计”工作空间中打开设计。在浏览器中的零部件上单击鼠标右键，选择“特性”，然后在对话框中编辑特性。"/>
	<label commandName="lclzFusionDrawingNewTableTipsDesc6" devLabel="When Type is set to Automatic, Fusion 360 determines the table type automatically, based on the contents of the current sheet. Parts lists are created for component, assembly, and animation references. Bend tables are created for sheet metal flat pattern references." translation="当“类型”设置为“自动”时，Fusion 360 将根据当前图纸的内容自动确定表格类型。明细表是为零部件、部件和动画参考创建的。折弯表是为钣金展开模式参考创建的。"/>
	<label commandName="lclzFusionDrawingNewTableTipsDesc7" devLabel="When Type is set to Automatic, Fusion 360 determines the table type automatically, based on the contents of the current sheet. Parts lists are created for component, assembly, and animation references. Bend tables are created for sheet metal flat pattern references." translation="当“类型”设置为“自动”时，Fusion 360 将根据当前图纸的内容自动确定表格类型。明细表是为零部件、部件和动画参考创建的。折弯表是为钣金展开模式参考创建的。"/>
	<label commandName="lclzFusionDrawingNewTableTipsDesc8" devLabel="When Type is set to Automatic, Fusion 360 determines the table type automatically, based on the contents of the current sheet. Parts lists are created for component, assembly, and animation references. Bend tables are created for sheet metal flat pattern references." translation="当“类型”设置为“自动”时，Fusion 360 将根据当前图纸的内容自动确定表格类型。明细表是为零部件、部件和动画参考创建的。折弯表是为钣金展开模式参考创建的。"/>
	<label commandName="lclzFusionDrawingNewTableTipsDesc9" devLabel="When Type is set to Automatic, Fusion 360 determines the table type automatically, based on the contents of the current sheet. Parts lists are created for component, assembly, and animation references. Bend tables are created for sheet metal flat pattern references." translation="当“类型”设置为“自动”时，Fusion 360 将根据当前图纸的内容自动确定表格类型。明细表是为零部件、部件和动画参考创建的。折弯表是为钣金展开模式参考创建的。"/>
	<label commandName="lclzFusionDrawingNewTableTipsTips1" devLabel="When you place a table on the bottom half of the sheet, the column labels flip to the bottom of the table. For parts lists and bend tables, the numbered rows are ordered from bottom to top. To lock or unlock the table flipping feature, press the Shift key." translation="将表格放置在图纸的下半部分时，列标签将翻转到表格的底部。对于明细表和折弯表，编号的行将按从下到上的顺序排列。若要锁定或解锁表格翻转功能，请按 Shift 键。"/>
	<label commandName="lclzFusionDrawingNewTableTipsTips2" devLabel="When you place a table on the bottom half of the sheet, the column labels flip to the bottom of the table. For parts lists and bend tables, the numbered rows are ordered from bottom to top. To lock or unlock the table flipping feature, press the Shift key." translation="将表格放置在图纸的下半部分时，列标签将翻转到表格的底部。对于明细表和折弯表，编号的行将按从下到上的顺序排列。若要锁定或解锁表格翻转功能，请按 Shift 键。"/>
	<label commandName="lclzFusionDrawingNewTableTipsTips3" devLabel="When you place a table on the bottom half of the sheet, the column labels flip to the bottom of the table. For parts lists and bend tables, the numbered rows are ordered from bottom to top. To lock or unlock the table flipping feature, press the Shift key." translation="将表格放置在图纸的下半部分时，列标签将翻转到表格的底部。对于明细表和折弯表，编号的行将按从下到上的顺序排列。若要锁定或解锁表格翻转功能，请按 Shift 键。"/>
	<label commandName="lclzFusionDrawingNewTableTipsTips4" devLabel="When you place a table on the bottom half of the sheet, the column labels flip to the bottom of the table. For parts lists and bend tables, the numbered rows are ordered from bottom to top. To lock or unlock the table flipping feature, press the Shift key." translation="将表格放置在图纸的下半部分时，列标签将翻转到表格的底部。对于明细表和折弯表，编号的行将按从下到上的顺序排列。若要锁定或解锁表格翻转功能，请按 Shift 键。"/>
	<label commandName="lclzFusionDrawingNewTableTipsTips5" devLabel="In complex assemblies, if you want to display all component levels, switch the Structure setting from First Level to All Levels." translation="在复杂的部件中，如果要显示所有零部件级别，请将“结构”设置从“第一级别”切换到“所有级别”。"/>
	<label commandName="lclzFusionDrawingNewTableTipsTips6" devLabel="When you place a table on the bottom half of the sheet, the column labels flip to the bottom of the table. For parts lists and bend tables, the numbered rows are ordered from bottom to top. To lock or unlock the table flipping feature, press the Shift key." translation="将表格放置在图纸的下半部分时，列标签将翻转到表格的底部。对于明细表和折弯表，编号的行将按从下到上的顺序排列。若要锁定或解锁表格翻转功能，请按 Shift 键。"/>
	<label commandName="lclzFusionDrawingNewTableTipsTips7" devLabel="When you place a table on the bottom half of the sheet, the column labels flip to the bottom of the table. For parts lists and bend tables, the numbered rows are ordered from bottom to top. To lock or unlock the table flipping feature, press the Shift key." translation="将表格放置在图纸的下半部分时，列标签将翻转到表格的底部。对于明细表和折弯表，编号的行将按从下到上的顺序排列。若要锁定或解锁表格翻转功能，请按 Shift 键。"/>
	<label commandName="lclzFusionDrawingNewTableTipsTips8" devLabel="When you place a table on the bottom half of the sheet, the column labels flip to the bottom of the table. For parts lists and bend tables, the numbered rows are ordered from bottom to top. To lock or unlock the table flipping feature, press the Shift key." translation="将表格放置在图纸的下半部分时，列标签将翻转到表格的底部。对于明细表和折弯表，编号的行将按从下到上的顺序排列。若要锁定或解锁表格翻转功能，请按 Shift 键。"/>
	<label commandName="lclzFusionDrawingNewTableTipsTips9" devLabel="When you place a table on the bottom half of the sheet, the column labels flip to the bottom of the table. For parts lists and bend tables, the numbered rows are ordered from bottom to top. To lock or unlock the table flipping feature, press the Shift key." translation="将表格放置在图纸的下半部分时，列标签将翻转到表格的底部。对于明细表和折弯表，编号的行将按从下到上的顺序排列。若要锁定或解锁表格翻转功能，请按 Shift 键。"/>
	<label commandName="lclzFusionDrawingNewTableTipsTitle1" devLabel="Table Information" translation="表格信息"/>
	<label commandName="lclzFusionDrawingNewTableTipsTitle2" devLabel="Table Information" translation="表格信息"/>
	<label commandName="lclzFusionDrawingNewTableTipsTitle3" devLabel="Table Information" translation="表格信息"/>
	<label commandName="lclzFusionDrawingNewTableTipsTitle4" devLabel="Table Information" translation="表格信息"/>
	<label commandName="lclzFusionDrawingNewTableTipsTitle5" devLabel="Edit Parts List Information" translation="编辑明细表信息"/>
	<label commandName="lclzFusionDrawingNewTableTipsTitle6" devLabel="Table Information" translation="表格信息"/>
	<label commandName="lclzFusionDrawingNewTableTipsTitle7" devLabel="Table Information" translation="表格信息"/>
	<label commandName="lclzFusionDrawingNewTableTipsTitle8" devLabel="Table Information" translation="表格信息"/>
	<label commandName="lclzFusionDrawingNewTableTipsTitle9" devLabel="Table Information" translation="表格信息"/>
	<label commandName="lclzFusionDrawingNote1" devLabel="Automatically creates a hole, thread, bend or leader note." translation="自动创建孔、螺纹、折弯或引线注释。"/>
	<label commandName="lclzFusionDrawingNote2" devLabel="Select an edge or bend centerline, then place the text." translation="选择边或折弯中心线，然后放置文本。"/>
	<label commandName="lclzFusionDrawingNote3" devLabel="For hole, thread and bend centerlines, information within the selected edge or bend centerline is automatically added as text." translation="对于孔、螺纹和折弯中心线，选定边或折弯中心线中的信息将自动添加为文本。"/>
	<label commandName="lclzFusionDrawingNote4" devLabel="For all other edges, enter and format text as required." translation="对于所有其他边，根据需要输入文本并设置其格式。"/>
	<label commandName="lclzFusionDrawingOffset1" devLabel="Select the object to offset, enter the offset distance, then specify a point to define to side." translation="选择要偏移的对象，输入偏移距离，然后指定一点以定义侧。"/>
	<label commandName="lclzFusionDrawingOrdinateDimension1" devLabel="Define view origins and place ordinate dimensions referencing them." translation="定义视图原点并放置参考视图原点的坐标标注。"/>
	<label commandName="lclzFusionDrawingOriginSymbolEdit1" devLabel="Edit the origin marker attributes." translation="编辑原点标记属性。"/>
	<label commandName="lclzFusionDrawingOriginSymbolEdit2" devLabel="Edit the origin market attributes." translation="编辑原点标记属性。"/>
	<label commandName="lclzFusionDrawingOriginSymbolEditTipsDesc" devLabel="Change the type of the origin marker. The selected type of the origin marker will be retained in Hole table edit dialog as well." translation="更改原点标记的类型。选定的原点标记类型也将保留在“孔表编辑”对话框中。"/>
	<label commandName="lclzFusionDrawingOriginSymbolEditTipsTips" devLabel="Change origin marker type" translation="更改原点标记类型"/>
	<label commandName="lclzFusionDrawingOriginSymbolEditTipsTitle" devLabel="Origin Edit Information" translation="原点编辑信息"/>
	<label commandName="lclzFusionDrawingPartsListEdit1" devLabel="Creates a parts list based on an assembly, storyboard, component, or sheet metal component reference." translation="根据部件、故事板、零部件或钣金零部件参考创建明细表。"/>
	<label commandName="lclzFusionDrawingPartsListEdit2" devLabel="Select a view, select the structure, place the table on the sheet, then adjust table direction and columns. Balloons are automatically added to associated views." translation="选择视图，选择结构，将表放置在图纸上，然后调整表方向和列。引出序号将自动添加到关联视图。"/>
	<label commandName="lclzFusionDrawingPartsListTable1" devLabel="Creates a parts list based on an assembly, storyboard, component, or sheet metal component reference." translation="根据部件、故事板、零部件或钣金零部件参考创建明细表。"/>
	<label commandName="lclzFusionDrawingPartsListTable2" devLabel="Select a view, select the structure, place the table on the sheet, then adjust table direction and columns. Balloons are automatically added to associated views." translation="选择视图，选择结构，将表放置在图纸上，然后调整表方向和列。引出序号将自动添加到关联视图。"/>
	<label commandName="lclzFusionDrawingPartsListTipsDesc" devLabel="When Type is set to Automatic, Fusion 360 determines the table type automatically, based on the contents of the current sheet. Parts lists are created for component, assembly, and animation references. Bend tables are created for sheet metal flat pattern references." translation="当“类型”设置为“自动”时，Fusion 360 将根据当前图纸的内容自动确定表格类型。明细表是为零部件、部件和动画参考创建的。折弯表是为钣金展开模式参考创建的。"/>
	<label commandName="lclzFusionDrawingPartsListTipsTips" devLabel="When you place a table on the bottom half of the sheet, the column labels flip to the bottom of the table. For parts lists and bend tables, the numbered rows are ordered from bottom to top. To lock or unlock the table flipping feature, press the Shift key." translation="将表格放置在图纸的下半部分时，列标签将翻转到表格的底部。对于明细表和折弯表，编号的行将按从下到上的顺序排列。若要锁定或解锁表格翻转功能，请按 Shift 键。"/>
	<label commandName="lclzFusionDrawingPartsListTipsTitle" devLabel="Table Information" translation="表格信息"/>
	<label commandName="lclzFusionDrawingPerspectiveView1" devLabel="Displays designs in three-point perspective." translation="以三点透视图显示设计。"/>
	<label commandName="lclzFusionDrawingPerspectiveView2" devLabel="Parallel lines converge on a vanishing point which provides a sense of how the human eye, or a camera, perceives real objects." translation="平行线汇聚在一个消失点上，这带来一种人眼或相机如何感知真实物体的感觉。"/>
	<label commandName="lclzFusionDrawingRadialDimension1" devLabel="Select a rounded edge, such as a fillet, hole, sphere, or cylinder, then place the dimension." translation="选择圆边，如圆角、孔、球体或圆柱体，然后放置尺寸标注。"/>
	<label commandName="lclzFusionDrawingRectangle1" devLabel="Creates a rectangle using 2 diagonal points." translation="使用 2 个对角点创建一个矩形。"/>
	<label commandName="lclzFusionDrawingRectangle2" devLabel="Specify the rectangle's start point, then specify a second point to define its width and height." translation="指定矩形的起点，然后指定另一个点以定义其宽度和高度。"/>
	<label commandName="lclzFusionDrawingRenumberTipsDesc" devLabel="You can renumber the first or last level in an all-level parts list. After you select the first balloon to renumber, any balloons that cannot be renumbered fade to grey." translation="可以对所有级别明细表中的第一个或最后一个级别重新编号。选择要重新编号的第一个引出序号后，任何不能重新编号的引出序号都将淡显为灰色。"/>
	<label commandName="lclzFusionDrawingRenumberTipsTips" devLabel="Components in the parts list or bends in the bend table automatically reorder as you renumber balloons or bend identifiers." translation="对引出序号或折弯标识符重新编号时，明细表中的零部件或折弯表中的折弯将自动重新排序。"/>
	<label commandName="lclzFusionDrawingRenumberTipsTitle" devLabel="Renumber Information" translation="对信息重新编号"/>
	<label commandName="lclzFusionDrawingRevCloud1" devLabel="Creates a revision cloud shape based on multiple input points." translation="根据多个输入点创建修订云线形状。"/>
	<label commandName="lclzFusionDrawingRevCloud2" devLabel="Select the cloud to edit the shape using the points and grips." translation="选择云线以使用点和夹点编辑形状。"/>
	<label commandName="lclzFusionDrawingRevMarker1" devLabel="Creates a revision marker at the selected location." translation="在选定位置创建修订标记。"/>
	<label commandName="lclzFusionDrawingRevMarker2" devLabel="Double click the marker to edit the marker designation." translation="双击标记以编辑标记规格。"/>
	<label commandName="lclzFusionDrawingRevMarkerTipsDesc" devLabel="To select and change the revision history for the revision marker to be added" translation="为要添加的修订标记选择和更改修订历史"/>
	<label commandName="lclzFusionDrawingRevMarkerTipsTips" devLabel="Choose the revision history for the revision marker from the dropdown" translation="从下拉列表中选择修订标记的修订历史"/>
	<label commandName="lclzFusionDrawingRevMarkerTipsTitle" devLabel="Revision Marker Information" translation="修订标记信息"/>
	<label commandName="lclzFusionDrawingRevisionTable1" devLabel="Creates a revision history for the active sheet." translation="为激活的图纸创建修订历史。"/>
	<label commandName="lclzFusionDrawingRevisionTable2" devLabel="Click a vertex or point to place the history table. Press shift to toggle interactive flipping." translation="单击顶点或点以放置历史表。按 Shift 键可切换交互式翻转。"/>
	<label commandName="lclzFusionDrawingRevisionTableEdit" devLabel="Edits a revision history." translation="编辑修订历史。"/>
	<label commandName="lclzFusionDrawingRevisionTableEditTipsDesc" devLabel="To add or remove the revision histories. Choose the visibility of the revision histories in the table. Add or remove generic rows to add generic data in the table. To change the text style of the selected cells and to change the visibility of the columns in the table." translation="添加或删除修订历史。选择表中修订历史的可见性。添加或删除常规行以在表中添加常规数据。更改选定单元的文本样式以及更改表中列的可见性。"/>
	<label commandName="lclzFusionDrawingRevisionTableEditTipsTips" devLabel="Edit revision history, generic rows. Control visibility of the revision histories. Change text style of the data in revision table." translation="编辑修订历史、常规行。控制修订历史的可见性。更改修订表中数据的文本样式。"/>
	<label commandName="lclzFusionDrawingRevisionTableEditTipsTitle" devLabel="Revision history Information" translation="修订历史信息"/>
	<label commandName="lclzFusionDrawingRotate1" devLabel="Select objects to rotate, then click Transform. Then specify a base point and a rotation angle." translation="选择要旋转的对象，单击“变换”，然后指定基点和旋转角度。"/>
	<label commandName="lclzFusionDrawingRotateTipsDesc" devLabel="If you want to redefine your selected objects or re-specify the base point without canceling the command, click Selection to return to Selection mode." translation="如果您希望在不取消该命令的情况下重新定义您选定的对象或者重新指定基点，请单击“选择”以返回到“选择”模式。"/>
	<label commandName="lclzFusionDrawingRotateTipsTips" devLabel="After specifying a base point, click Reference Selection to define a reference angle along an edge or between any two points. " translation="指定基点后，请单击“参考选择”以定义沿边或任意两点之间的参考角度。 "/>
	<label commandName="lclzFusionDrawingRotateTipsTitle" devLabel="Rotate Information" translation="旋转信息"/>
	<label commandName="lclzFusionDrawingSingleDim1" devLabel="Creates linear, aligned, angular, radius, and diameter dimensions." translation="创建线性、对齐、角度、半径和直径标注。"/>
	<label commandName="lclzFusionDrawingSingleDim2" devLabel="Select objects, points, edges, existing dimensions, or select two points. Then place the dimension. The most appropriate dimension type is created." translation="选择对象、点、边、现有尺寸标注或选择两个点，然后放置尺寸标注。将创建最合适的尺寸标注类型。"/>
	<label commandName="lclzFusionDrawingSketchClose1" devLabel="Closes the sketch editing mode." translation="关闭草图编辑模式。"/>
	<label commandName="lclzFusionDrawingSketchCreate1" devLabel="Enters Sketch mode and creates a new sketch on the current sheet." translation="进入“草图”模式并在当前图纸上创建新草图。"/>
	<label commandName="lclzFusionDrawingSketchCreate2" devLabel="Select Finish Sketch to exit out of the mode." translation="选择“完成草图”可退出“草图”模式。"/>
	<label commandName="lclzFusionDrawingSketchSmartDimL1" devLabel="Create sketch dimensions for sketch geometries. Use dimensions to control the size or position of sketch objects." translation="创建草图几何图元的草图尺寸。使用尺寸控制草图对象的大小或位置。"/>
	<label commandName="lclzFusionDrawingSketchSmartDimL2" devLabel="Select the sketch objects to dimension, then select an area to position the dimension." translation="选择要标注尺寸的草图对象，然后选择一个区域以定位尺寸标注。"/>
	<label commandName="lclzFusionDrawingSurfaceTexture1" devLabel="Creates a surface texture symbol." translation="创建表面粗糙度符号。"/>
	<label commandName="lclzFusionDrawingSurfaceTexture2" devLabel="Select an edge, dimension extension line or feature control frame, place the surface texture symbol, then add type, requirements and process." translation="选择边、尺寸界线或形位公差符号，放置表面粗糙度符号，然后添加类型、要求和焊接方法。"/>
	<label commandName="lclzFusionDrawingSurfaceTextureTipsDesc" devLabel="To attach a surface texture symbol to a surface in an ISO drawing, select an edge, right-click and select Surface from the contextual menu." translation="若要将表面粗糙度符号附着到 ISO 工程图中的曲面，请选择一条边，单击鼠标右键，然后从上下文菜单中选择“曲面”。"/>
	<label commandName="lclzFusionDrawingSurfaceTextureTipsTips" devLabel="The properties available within the command dialog depend on the drafting standard used by the drawing and the selected symbol type." translation="命令对话框中可用的特性取决于工程图使用的绘图标准和选定的符号类型。"/>
	<label commandName="lclzFusionDrawingSurfaceTextureTipsTitle" devLabel="Surface Texture Information" translation="表面粗糙度信息"/>
	<label commandName="lclzFusionDrawingSymbolEdit1" devLabel="Edit a symbol." translation="编辑符号。"/>
	<label commandName="lclzFusionDrawingTable" devLabel="Insert a blank table to add data manually." translation="插入空白表格以手动添加数据。"/>
	<label commandName="lclzFusionDrawingTableEditTipsDesc" devLabel="To change the width of a single column, select a cell and adjust the grips that appear around the cell. The overall width of the table changes but the other columns maintain their widths. To change the width of a column without changing the overall width of the table, click the table or cell border to select the whole table, then adjust the grips that appear at the table columns." translation="若要更改单列的宽度，请选择一个单元并调整显示在单元周围的夹点。表格的总宽度会改变，但其他列会保持其宽度。若要更改某列的宽度而不更改表格的总宽度，请单击表格或单元边框以选择整个表格，然后调整显示在表格列上的夹点。"/>
	<label commandName="lclzFusionDrawingTableEditTipsTips" devLabel="To edit the contents of a table cell, select the cell and double-click. To replace the entire contents of a cell, select it, then start typing." translation="若要编辑某个表格单元的内容，请选择该单元并双击。若要替换某个单元的全部内容，请选择该单元，然后开始键入。"/>
	<label commandName="lclzFusionDrawingTableEditTipsTitle" devLabel="Edit Table Information" translation="编辑表格信息"/>
	<label commandName="lclzFusionDrawingTaperSlopeSymbol1" devLabel="Creates a taper and slope symbol." translation="创建锥度和斜度符号。"/>
	<label commandName="lclzFusionDrawingTaperSlopeSymbol2" devLabel="Select an edge, place the taper and slope symbol, then add type and slope/taper dimensions." translation="选择一条边，放置锥度和斜度符号，然后添加类型和斜度/锥度尺寸。"/>
	<label commandName="lclzFusionDrawingTaperSlopeSymbolTipsTips" devLabel="Available taper and slope symbol icons vary based on the drawing standard being used (ISO or ASME). This is set when the drawing is created and cannot be changed." translation="可用的锥度和斜度符号图标根据使用的绘图标准(ISO 或 ASME)而不同。这是在创建图形时设置的，无法更改。"/>
	<label commandName="lclzFusionDrawingTaperSlopeSymbolTipsTitle" devLabel="Taper and Slope Information" translation="锥度和斜度信息"/>
	<label commandName="lclzFusionDrawingTemplateImageInsert1" devLabel="Inserts an image into the current sheet." translation="将图像插入当前图纸。"/>
	<label commandName="lclzFusionDrawingTemplateImageInsert2" devLabel="Select an image in insert, place the image, then format as required." translation="在“插入”中选择图像，放置该图像，然后根据需要设置格式。"/>
	<label commandName="lclzFusionDrawingTidyUpCommand" devLabel="Auto rearranges objects in the sheet to keep the layout tidy." translation="自动重新排列图纸中的对象，以保持布局整洁。"/>
	<label commandName="lclzFusionDrawingTitleBlockEditTipsDesc" devLabel="When you insert your own title block, the origin point (0,0) in the DWG will equate to the bottom right corner of the Fusion Drawing border." translation="当您插入您自己的标题栏时，DWG 中的原点(0,0)将相当于 Fusion 工程图边框的右下角。"/>
	<label commandName="lclzFusionDrawingTitleBlockEditTipsTips" devLabel="The drawing's standard, ASME or ISO, defines the default title block. You can insert your own DWG file as a title block using Insert Title Block within Sheet Settings." translation="工程图的标准(ASME 或 ISO)定义了默认的标题栏。您可以使用“图纸设置”中的“插入标题栏”插入您自己的 DWG 文件作为标题栏。"/>
	<label commandName="lclzFusionDrawingTitleBlockEditTipsTitle" devLabel="Title Block Information" translation="标题栏信息"/>
	<label commandName="lclzFusionDrawingTrim1" devLabel="Select the objects to trim. All objects automatically become cutting boundaries." translation="选择要修剪的对象。所有对象将自动变为剪切边界。"/>
	<label commandName="lclzFusionDrawingViewAuxiliaryTipsDesc" devLabel="An auxiliary view automatically inherits the properties of the parent view. You can adjust the view's style, scale and edge visibility while creating the view, or change the settings later by double-clicking the auxiliary view." translation="辅助视图会自动继承父视图的特性。您可以在创建视图时调整视图的样式、比例和边可见性，也可以稍后通过双击辅助视图来更改设置。"/>
	<label commandName="lclzFusionDrawingViewAuxiliaryTipsTips" devLabel="An auxiliary view shows the true size and shape of a surface that is foreshortened in an orthographic view. The resulting view is aligned to the parent view." translation="辅助视图会显示正交视图中按透视法缩短的曲面的真实大小和形状。生成的视图与父视图对齐。"/>
	<label commandName="lclzFusionDrawingViewAuxiliaryTipsTitle" devLabel="Auxiliary View Information" translation="辅助视图信息"/>
	<label commandName="lclzFusionDrawingViewBase1" devLabel="Creates a view of the referenced design." translation="创建参考设计的视图。"/>
	<label commandName="lclzFusionDrawingViewBase2" devLabel="Place the view, then adjust the view's orientation, style, scale, and edge visibility. Once created, projected, section and detail views are derived from this view." translation="放置视图，然后调整视图的方向、样式、比例和边可见性。一旦创建，将从此视图衍生投影视图、剖视图和局部视图。"/>
	<label commandName="lclzFusionDrawingViewBaseTemplate1" devLabel="Generates a base view placeholder." translation="生成基础视图占位符。"/>
	<label commandName="lclzFusionDrawingViewBaseTemplate2" devLabel="When the drawing template is used to create a new drawing, the placeholder is updated to show the referenced design." translation="当工程图模板用于创建新工程图时，占位符将更新以显示参考设计。"/>
	<label commandName="lclzFusionDrawingViewBaseTipsDesc" devLabel="Base view orientation can only be set during creation, while other attributes can be modified afterwards. Make sure the view orientation is how you'd like it before clicking OK." translation="只能在创建期间设置基础视图方向，而其他属性可在以后修改。在单击“确定”之前，请确保视图方向是您所需的方向。"/>
	<label commandName="lclzFusionDrawingViewBaseTipsTips" devLabel="Generates a drawing view that is derived from your selected 3D model. You can use a base view as a parent for other views." translation="生成从选定的三维模型衍生的工程视图。可以使用基础视图作为其他视图的父项。"/>
	<label commandName="lclzFusionDrawingViewBaseTipsTitle" devLabel="Base View Information" translation="基础视图信息"/>
	<label commandName="lclzFusionDrawingViewDetail1" devLabel="Creates a circular detail view of a portion of the design." translation="创建设计的某个部分的圆形局部视图。"/>
	<label commandName="lclzFusionDrawingViewDetail2" devLabel="Select a parent view, specify the center point of the detail boundary, specify the size of the detail boundary, then place the detail view. The detail view's scale is increased to the next scale." translation="选择父视图，指定详图边界的中心点，指定详图边界的尺寸，然后放置局部视图。局部视图的比例将增加到下一个比例。"/>
	<label commandName="lclzFusionDrawingViewDetailTipsDesc" devLabel="If you select the detail view boundary, you can use the gray grips to reposition the boundary. The detail view automatically updates." translation="如果您选择局部视图边界，可以使用灰色夹点重新定位边界。局部视图将会自动更新。"/>
	<label commandName="lclzFusionDrawingViewDetailTipsTips" devLabel="Specify the center point of the area to magnify, specify the size of the boundary, then click to place the detail view. Modify the scale and edge visibility properties and click OK when done." translation="指定要放大区域的中心点，指定边界的尺寸，然后单击以放置局部视图。修改比例和边的可见性特性，完成后单击“确定”。"/>
	<label commandName="lclzFusionDrawingViewDetailTipsTitle" devLabel="Detail View Information" translation="局部视图信息"/>
	<label commandName="lclzFusionDrawingViewEdit1" devLabel="Select a view to modify its properties." translation="选择视图以修改其特性。"/>
	<label commandName="lclzFusionDrawingViewEditTipsDesc" devLabel="Projected views, detail views, and section views inherit properties from their parent view. If the properties of a view change, it will no longer inherit the settings from its parent view. When creating shaded views, use the Improve View Quality checkbox to improve the render of shaded views. This is more evident with curved, long, thin detailed areas, but it may adversely affect performance and upload times." translation="投影视图、局部视图和剖视图会继承父视图的特性。如果视图特性更改，则它将不再从父视图继承设置。创建着色视图时，使用“提高视图质量”复选框可改进着色视图的渲染。这在弯曲、长、薄的局部区域中更明显，但可能会对性能和上传时间产生负面影响。"/>
	<label commandName="lclzFusionDrawingViewEditTipsTips" devLabel="When moving a projected view, you can press Shift to break that view's alignment with its parent. For example, if a projected view's alignment is “locked” vertically or horizontally with a base view, you can click Move on the toolbar, select the view, then press Shift to “unlock” the alignment. Press Shift again to realign the view." translation="当移动投影视图时，可以按 Shift 键打断视图与其父视图的对齐。例如，如果一个投影视图与基础视图的对齐被“锁定”在垂直或水平方向，可以单击工具栏上的“移动”，选择该视图，然后按 Shift 键以解除对齐锁定。再次按 Shift 键可重新对齐该视图。"/>
	<label commandName="lclzFusionDrawingViewEditTipsTitle" devLabel="View Edit Information" translation="视图编辑信息"/>
	<label commandName="lclzFusionDrawingViewProject1" devLabel="Creates projected orthogonal and isometric views of the design." translation="创建设计的正交投影视图和等轴测视图。"/>
	<label commandName="lclzFusionDrawingViewProject2" devLabel="Select a parent view, then place projected views as required." translation="选择父视图，然后根据需要放置投影视图。"/>
	<label commandName="lclzFusionDrawingViewProjectTemplate1" devLabel="Generates projected and isometric view placeholders." translation="生成投影视图和等轴测视图占位符。"/>
	<label commandName="lclzFusionDrawingViewProjectTemplate2" devLabel="When the drawing template is used to create a new drawing, the placeholders are updated to show the referenced design." translation="当工程图模板用于创建新工程图时，占位符将更新以显示参考设计。"/>
	<label commandName="lclzFusionDrawingViewSection1" devLabel="Creates a full, half, offset, or aligned section view through the design." translation="创建通过设计的全剖、半剖、阶梯剖或旋转剖视图。"/>
	<label commandName="lclzFusionDrawingViewSection2" devLabel="Select a parent view, specify the start point of the section line, specify addition points to define the section line, then place the section view." translation="选择父视图，指定剖切线的起点，指定其他点以定义剖切线，然后放置剖视图。"/>
	<label commandName="lclzFusionDrawingViewSectionTipsDesc" devLabel="To modify a section view, click an existing section line and adjust the gray grips. If the path of the section line changes, the section view automatically updates." translation="若要修改剖视图，请单击现有的剖切线并调整灰色夹点。如果剖切线的路径更改，剖视图将自动更新。"/>
	<label commandName="lclzFusionDrawingViewSectionTipsTips" devLabel="Click to specify the path of the section line. When complete, press Enter to generate the section view, then click to place it." translation="单击以指定剖切线的路径。完成后，按 Enter 键以生成剖视图，然后单击以放置它。"/>
	<label commandName="lclzFusionDrawingViewSectionTipsTitle" devLabel="Section View Information" translation="剖视图信息"/>
	<label commandName="lclzFusionDrawingViewSimpleSection1" devLabel="Generates a simple (single segment cutting plane) section view from a drawing view." translation="从工程视图生成简单的(单一剖切面)剖视图。"/>
	<label commandName="lclzFusionDrawingViewSimpleSection2" devLabel="Select a parent view, then specify the section line's start and end points, and then specify the insertion point for your section view." translation="选择父视图，指定剖切线的起点和终点，然后指定剖视图的插入点。"/>
	<label commandName="lclzFusionDrawingWeldSymbol1" devLabel="Creates a welding symbol." translation="创建焊接符号。"/>
	<label commandName="lclzFusionDrawingWeldSymbol2" devLabel="Select an edge, place the welding symbol, then add type, size, length and contour." translation="选择边，放置焊接符号，然后添加类型、尺寸、长度和轮廓。"/>
	<label commandName="lclzFusionDrawingWeldSymbolTipsTips" devLabel="The available properties in the dialog box depend on which weld type is selected, and the drafting standard in use." translation="该对话框中的可用特性取决于选择的焊接类型以及使用的绘图标准。"/>
	<label commandName="lclzFusionDrawingWeldSymbolTipsTitle" devLabel="Welding Information" translation="焊接信息"/>
	<label commandName="lclzFusionEmptyTable1" devLabel="Creates a custom table." translation="创建自定义表。"/>
	<label commandName="lclzFusionEmptyTable2" devLabel="Place the table, then adjust the table direction, number of columns, number of rows, and text alignment." translation="放置表，然后调整表方向、列数、行数和文本对齐。"/>
	<label commandName="lclzFusionHoleTable1" devLabel="Creates a hole table based on the origin you place in a drawing view." translation="根据您在工程视图中放置的原点创建孔表。"/>
	<label commandName="lclzFusionHoleTable2" devLabel="Selecting the origin point in the view automatically selects the view and assigns hole identifiers within the view." translation="在视图中选择原点时，会自动选择视图并在视图中指定孔标识符。"/>
	<label commandName="lclzGeometry" devLabel="Geometry" translation="几何图元"/>
	<label commandName="lclzHistoryDesc1" devLabel="Shows historical records of changes, versions and revisions." translation="显示更改、版本和修订的历史记录。"/>
	<label commandName="lclzInsert" devLabel="Insert" translation="插入"/>
	<label commandName="lclzInspect" devLabel="Inspect" translation="检验"/>
	<label commandName="lclzLinkedComponents" devLabel="External Components" translation="外部零部件"/>
	<label commandName="lclzLinkedComponentsTooltip" devLabel="Includes external components in your drawing." translation="在工程图中包含外部零部件。"/>
	<label commandName="lclzManage" devLabel="Process Management" translation="流程管理"/>
	<label commandName="lclzManageExtRefreshCmd" devLabel="Refresh" translation="刷新"/>
	<label commandName="lclzManageExtRefreshCmd1" devLabel="Updates process management data in the current view." translation="更新当前视图中的流程管理数据。"/>
	<label commandName="lclzManageExtRefreshCmd2" devLabel="The process management data you see can become out of date if someone else has made changes to referenced components. Use Refresh to make sure you are seeing the latest data." translation="如果其他人对参考零部件进行了更改，您看到的流程管理数据可能会过期。请使用“刷新”以确保您看到最新数据。"/>
	<label commandName="lclzManageTab" devLabel="MANAGE" translation="管理"/>
	<label commandName="lclzMaxSheetCountLabel" devLabel="The maximum number of sheets in a drawing is " translation="工程图中的最大图纸数为"/>
	<label commandName="lclzModesAutomatic" devLabel="Automatic" translation="自动"/>
	<label commandName="lclzModesAutomaticTooltip" devLabel="Automatic mode of creating drawing from design" translation="从设计创建工程图的自动模式"/>
	<label commandName="lclzModesManual" devLabel="Manual" translation="手动"/>
	<label commandName="lclzModesManualTooltip" devLabel="Manual mode of creating drawing from design" translation="从设计创建工程图的手动模式"/>
	<label commandName="lclzModify" devLabel="Modify" translation="修改"/>
	<label commandName="lclzNewFusionDrawingDocumentTipsDesc" devLabel="For more control over drawing defaults, make adjustments in Preferences in your User Name drop-down in the top right." translation="为了更好地控制工程图的默认设置，请在右上角“用户名”下拉列表中的“首选项”中进行调整。"/>
	<label commandName="lclzNewFusionDrawingDocumentTipsTips" devLabel="Standard and Units cannot be changed once a drawing is created. Sheet size, however, can be adjusted at any time in Sheet Settings." translation="创建工程图后，将无法更改标准和单位。但是，可以在“图纸设置”中随时调整图纸尺寸。"/>
	<label commandName="lclzNewFusionDrawingDocumentTipsTitle" devLabel="Create Drawing Information" translation="创建工程图信息"/>
	<label commandName="lclzNewTitleBlockDesc" devLabel="After you select a source and click OK, the Title Block contextual environment opens, where you can create and modify geometry and text to customize the title block." translation="选择源并单击“确定”后，将打开标题栏上下文环境，从中可以创建和修改几何图元和文本以自定义标题栏。"/>
	<label commandName="lclzNewTitleBlockTips" devLabel="Create a new title block based on an existing title block, from scratch, or from a DWG file." translation="基于现有标题栏、从头开始或者从 DWG 文件创建新标题栏。"/>
	<label commandName="lclzNewTitleBlockTipsAndTricksTitle" devLabel="New Title Block Information" translation="新标题栏信息"/>
	<label commandName="lclzOutOfDateLine" devLabel="This sheet is out of date." translation="该图纸已过期。"/>
	<label commandName="lclzOutOfDateLine2" devLabel="Click to refresh the sheet." translation="单击以刷新图纸。"/>
	<label commandName="lclzReference" devLabel="From" translation="从"/>
	<label commandName="lclzRefresh" devLabel="Refresh" translation="刷新"/>
	<label commandName="lclzRelease" devLabel="Release" translation="发布"/>
	<label commandName="lclzSelectDrawingOrTemplate" devLabel="Select Drawing or Template File" translation="选择工程图或模板文件"/>
	<label commandName="lclzSelectTemplate" devLabel="Select Template" translation="选择模板"/>
	<label commandName="lclzSheet" devLabel="Sheet" translation="图纸"/>
	<label commandName="lclzSheet1" devLabel="Sheet1" translation="Sheet1"/>
	<label commandName="lclzSheetCountToolTip" devLabel="Selecting the Detect and Omit Fastener checkbox in the Document Settings may reduce the sheet count." translation="选中“文档设置”中的“检测并忽略紧固件”复选框可能会减少图纸计数。"/>
	<label commandName="lclzSheetSize" devLabel="Sheet Size" translation="图纸尺寸"/>
	<label commandName="lclzSketchClose" devLabel="Sketch" translation="草图"/>
	<label commandName="lclzSketchSymbolClose" devLabel="Sketch Symbol" translation="草图符号"/>
	<label commandName="lclzSketchSymbolTab" devLabel="SKETCH SYMBOL" translation="草图符号"/>
	<label commandName="lclzSketchTab" devLabel="SKETCH" translation="草图"/>
	<label commandName="lclzStandard" devLabel="Standard" translation="标准"/>
	<label commandName="lclzStrOf" devLabel="of" translation="/"/>
	<label commandName="lclzSymbols" devLabel="Symbols" translation="符号"/>
	<label commandName="lclzTables" devLabel="Tables" translation="表格"/>
	<label commandName="lclzTemplateHasNoConfiguration" devLabel="The selected drawing template's configuration can't be retrieved. Please open, save and close the drawing template and try again." translation="无法检索选定工程图模板的配置。请打开、保存并关闭工程图模板，然后重试。"/>
	<label commandName="lclzTemplateSelect" devLabel="Select" translation="选择"/>
	<label commandName="lclzText" devLabel="Text" translation="文本"/>
	<label commandName="lclzTitleBlockManagementDesc" devLabel="Click the radio button next the title block to use it on the current sheet. Click the title block name to highlight it, then click the Rename or Delete icons to manage it." translation="单击标题栏旁边的单选按钮以在当前图纸上使用它。单击标题栏名称以将其亮显，然后单击“重命名”或“删除”图标以对其进行管理。"/>
	<label commandName="lclzTitleBlockManagementTips" devLabel="You can manage multiple title blocks within the same design, to accommodate different sheet sizes and requirements." translation="可以在同一设计中管理多个标题栏，以适应不同的图纸尺寸和要求。"/>
	<label commandName="lclzTitleBlockManagementTipsAndTricksTitle" devLabel="Title Block Management Information" translation="标题栏管理信息"/>
	<label commandName="lclzTitleBlockPalette" devLabel="Title Block" translation="标题栏"/>
	<label commandName="lclzTitleBlockTab" devLabel="TITLE BLOCK" translation="标题栏"/>
	<label commandName="lclzUCADesc1" devLabel="Displays a list of changes made to the reference assembly and its external references." translation="显示对参考部件及其外部参考所做更改的列表。"/>
	<label commandName="lclzUCADesc2" devLabel="Select a component to highlight it in the canvas." translation="选择一个零部件以使其在画布中亮显。"/>
	<label commandName="lclzUnits" devLabel="Units" translation="单位"/>
	<label commandName="lclzUnmatchedTemplate" devLabel="The selected template's configuration does not match the current drawing's configuration. Select a template using the same standard and units." translation="选定模板的配置与当前工程图的配置不匹配。请选择使用相同标准和单位的模板。"/>
	<label commandName="lclzUntitled" devLabel="Untitled" translation="无标题"/>
	<label commandName="lclzViews" devLabel="Create" translation="创建"/>
	<label commandName="line" devLabel="Line" translation="直线"/>
	<label commandName="m" devLabel="m" translation="米"/>
	<label commandName="middleCenter" devLabel="Middle Center" translation="正中"/>
	<label commandName="middleLeft" devLabel="Middle Left" translation="左中"/>
	<label commandName="middleRight" devLabel="Middle Right" translation="右中"/>
	<label commandName="minDistToDim_ASME" devLabel="Minimum distance to dimension (ASME)" translation="到标注的最小距离(ASME)"/>
	<label commandName="minDistToDim_ISO" devLabel="Minimum distance to dimension (ISO)" translation="到标注的最小距离(ISO)"/>
	<label commandName="mm" devLabel="mm" translation="mm"/>
	<label commandName="multipleAlignment" devLabel="Multiple Alignments" translation="多重对齐"/>
	<label commandName="newConfigTable" devLabel="Configuration Table" translation="配置表"/>
	<label commandName="newHoleTable" devLabel="Hole Table" translation="孔表"/>
	<label commandName="newLinkTable" devLabel="Link Table" translation="链接表"/>
	<label commandName="newRevisionTable" devLabel="Revision History" translation="修订历史"/>
	<label commandName="newTableTypeAutomatic" devLabel="Automatic" translation="自动"/>
	<label commandName="newTableTypeAutomaticBendTable" devLabel="Bend Table" translation="折弯表"/>
	<label commandName="newTableTypeAutomaticPartList" devLabel="Parts List" translation="明细表"/>
	<label commandName="newTableTypeBendTable" devLabel="Bend Table" translation="折弯表"/>
	<label commandName="newTableTypeEmptyTable" devLabel="Custom Table" translation="自定义表"/>
	<label commandName="newTableTypePartsList" devLabel="Parts List" translation="明细表"/>
	<label commandName="newViaPairsTable" devLabel="Via Pairs" translation="过孔对"/>
	<label commandName="noCustomLabelMsg" devLabel="You can't edit this label. To add a custom value, create a Custom Label." translation="您无法编辑此标签。若要添加自定义值，请创建自定义标签。"/>
	<label commandName="noElectronicsDesignText1" devLabel="Your " translation="您的 "/>
	<label commandName="noElectronicsDesignText10" devLabel="." translation="."/>
	<label commandName="noElectronicsDesignText2" devLabel="3D PCB" translation="三维 PCB"/>
	<label commandName="noElectronicsDesignText3" devLabel=" isn’t linked to an " translation=" 未链接到 "/>
	<label commandName="noElectronicsDesignText4" devLabel="Electronics Design File" translation="电子器件设计文件"/>
	<label commandName="noElectronicsDesignText6" devLabel="First link your 3D PCB before creating a drawing to access critical data like the " translation="在创建工程图之前，请先链接三维 PCB 以访问关键数据，如 "/>
	<label commandName="noElectronicsDesignText7" devLabel="Layer Stack" translation="层叠"/>
	<label commandName="noElectronicsDesignText8" devLabel=" and " translation=" 和 "/>
	<label commandName="noElectronicsDesignText9" devLabel="Reference Designators" translation="参考位号"/>
	<label commandName="noElectronicsDesignTitle" devLabel="Electronics Design is not linked" translation="电子器件设计未链接"/>
	<label commandName="objectsToPassThrough" devLabel="Objects to pass through" translation="要穿过的对象"/>
	<label commandName="openAssociatedElectronicsDesign1" devLabel="To create a drawing from a 3D PCB, you need to open the " translation="若要从三维 PCB 创建工程图，需要打开 "/>
	<label commandName="openAssociatedElectronicsDesign2" devLabel="associated electronics design" translation="关联的电子器件设计"/>
	<label commandName="openAssociatedElectronicsDesign3" devLabel="." translation=""/>
	<label commandName="openElectronicsDesign" devLabel="Open Design" translation="打开设计"/>
	<label commandName="partsListExtension" devLabel=".csv" translation=".csv"/>
	<label commandName="pdfExtension" devLabel=".pdf" translation=".pdf"/>
	<label commandName="rectangle" devLabel="Rectangle" translation="矩形"/>
	<label commandName="referenceGroup" devLabel="Reference" translation="参考"/>
	<label commandName="revDeleteRow" devLabel="Delete Selected Generic Row" translation="删除选定的常规行"/>
	<label commandName="revEditRows" devLabel="Generic Rows" translation="常规行"/>
	<label commandName="revInsertRowAbove" devLabel="Insert Generic Row Above" translation="在上方插入常规行"/>
	<label commandName="revInsertRowBelow" devLabel="Insert Generic Row Below" translation="在下方插入常规行"/>
	<label commandName="revScopeDrawing" devLabel="Drawing" translation="工程图"/>
	<label commandName="revScopeSheet" devLabel="Sheet" translation="图纸"/>
	<label commandName="shapeProfile" devLabel="Shape Profile" translation="形状轮廓"/>
	<label commandName="smartCenterMarkPattern" devLabel="Pattern" translation="阵列"/>
	<label commandName="smartCenterToCut" devLabel="Round Cuts" translation="圆形切割"/>
	<label commandName="smartCenterToExtrude" devLabel="Round Extrudes" translation="圆形拉伸"/>
	<label commandName="smartCenterToFillet" devLabel="Fillet" translation="圆角"/>
	<label commandName="smartCenterToHole" devLabel="Hole" translation="孔"/>
	<label commandName="spline" devLabel="Spline" translation="样条曲线"/>
	<label commandName="tableDirection" devLabel="Table Direction" translation="表格方向"/>
	<label commandName="textAlignment" devLabel="Text Alignment" translation="文本对齐"/>
	<label commandName="topCenter" devLabel="Top Center" translation="中上"/>
	<label commandName="topLeft" devLabel="Top Left" translation="左上"/>
	<label commandName="topRight" devLabel="Top Right" translation="右上"/>
	<label commandName="topToBottom" devLabel="Down" translation="向下"/>
</Resource>