<?xml version="1.0" encoding="utf-8"?><Resource>
	<label commandName="AddStudyMaterialAmountError" devLabel="Material could not be added. At least one method in the study contains seven materials, which is the maximum number." translation="재료를 추가할 수 없습니다. 학습에 포함된 하나 이상의 방법이 최대 개수인 7가지 재료를 포함하고 있습니다."/>
	<label commandName="AddStudyMaterialExistsError" devLabel="Material could not be added. An equivalent material is already present in the study." translation="재료를 추가할 수 없습니다. 등가 재료가 학습에 이미 있습니다."/>
	<label commandName="AddStudyMaterialInvalidError" devLabel="The selected material could not be added. Material properties are invalid for generative design." translation="선택한 재료를 추가할 수 없습니다. 재료 특성이 제너레이티브 디자인에 부적합합니다."/>
	<label commandName="BrowserExplicitElementDeletionsLabel" devLabel="Deletion Criteria" translation="삭제 기준"/>
	<label commandName="BrowserGenerativeLimitBucklingSafetyFactorLabel" devLabel="Buckling Safety factor: %1%" translation="버클링 안전계수: %1%"/>
	<label commandName="BrowserGenerativeLimitGlobalDisplacementLabel" devLabel="Global Displacement" translation="전역 변위"/>
	<label commandName="BrowserGenerativeLimitLocalDisplacementLabel" devLabel="Location %1%" translation="위치 %1%"/>
	<label commandName="BrowserGenerativeLimitMassTargetLabel" devLabel="Mass Target: %1%" translation="질량 대상: %1%"/>
	<label commandName="BrowserGenerativeLimitModalFrequencyLabel" devLabel="Modal Frequency: %1% Hz" translation="모달 주파수: %1% Hz"/>
	<label commandName="BrowserGenerativeLimitSafetyFactorLabel" devLabel="Target Safety Factor: %1%" translation="대상 안전계수: %1%"/>
	<label commandName="BrowserGenerativeLimitTargetVolumeLabel" devLabel="Target Volume: %1%" translation="목표 체적: %1%"/>
	<label commandName="BrowserGenerativeLimitVolumePercentLabel" devLabel="%% of Design Volume: %1%" translation="디자인 체적의 %%: %1%"/>
	<label commandName="BrowserGenerativeLimitsLabel" devLabel="Limits" translation="한계"/>
	<label commandName="BrowserGenerativeLocalDisplacementLabel" devLabel="Local Displacement" translation="로컬 변위"/>
	<label commandName="BrowserGenerativeManufacturingLabel" devLabel="Manufacturing" translation="제조"/>
	<label commandName="BrowserGenerativeObjectivesLabel" devLabel="Objectives" translation="목표"/>
	<label commandName="BrowserGenerativeObjectivesMaximizeStiffnessLabel" devLabel="Maximize Stiffness" translation="강성 최대화"/>
	<label commandName="BrowserGenerativeObjectivesMinimizeMassLabel" devLabel="Minimize Mass" translation="질량 최소화"/>
	<label commandName="BrowserGenerativeObjectivesMinimizePressureDropLabel" devLabel="Minimize Pressure Drop" translation="압력 강하 최소화"/>
	<label commandName="BrowserLocalDisplacementHealthTooltipSick" devLabel="Reference geometry is missing" translation="참조 형상이 누락되었습니다."/>
	<label commandName="BrowserSimElementDeletionHealthTooltipSick" devLabel="Target geometry is missing" translation="대상 형상이 누락되었습니다."/>
	<label commandName="BrowserSimElementDeletionsHealthTooltipAllSick" devLabel="All valid Deletion Criteria are missing targets" translation="유효한 모든 삭제 기준에 대상이 없습니다."/>
	<label commandName="BrowserSimElementDeletionsHealthTooltipSomeSick" devLabel="A Deletion Criteria is missing a target" translation="삭제 기준에 대상이 없습니다."/>
	<label commandName="BrowserSimGenerativeLocalDisplacementsHealthTooltipSomeSick" devLabel="A local displacement is missing a reference" translation="로컬 변위에 참조가 없습니다."/>
	<label commandName="BrowserSimLocalDisplacementsHealthTooltipAllSick" devLabel="All valid local displacements are missing references" translation="유효한 모든 로컬 변위에 참조가 없습니다."/>
	<label commandName="DisplacementX" devLabel="Displacement X" translation="변위 X"/>
	<label commandName="DisplacementY" devLabel="Displacement Y" translation="변위 Y"/>
	<label commandName="DisplacementZ" devLabel="Displacement Z" translation="변위 Z"/>
	<label commandName="GenCallAngularGlobalLoad" devLabel="Click here to select 'Angular Global Loads'." translation="'각도 전역 하중'을 선택하려면 여기를 클릭하십시오."/>
	<label commandName="GenCallEditGravity" devLabel="Click here to select 'Gravity'." translation="'중력'을 선택하려면 여기를 클릭하십시오."/>
	<label commandName="GenCallFlowOpenings" devLabel="Click here to select 'Flow Openings'." translation="여기를 클릭하여 '흐름 개구부'를 선택합니다."/>
	<label commandName="GenCallFlowSources" devLabel="Click here to select 'Flow Sources'." translation="여기를 클릭하여 '흐름 소스'를 선택합니다."/>
	<label commandName="GenCallFluidPressures" devLabel="Click here to select 'Fluid Pressures'." translation="여기를 클릭하여 '유체 압력'을 선택합니다."/>
	<label commandName="GenCallLinearGlobalLoad" devLabel="Click here to select 'Linear Global Loads'." translation="'선형 전역 하중'을 선택하려면 여기를 클릭하십시오."/>
	<label commandName="GenCallManufacturingMethod" devLabel="Click here to unselect Manufacturing method." translation="제조 방법을 선택취소하려면 여기를 클릭하십시오."/>
	<label commandName="GenCallObjectives" devLabel="Click here to select 'Objectives'." translation="'목표'를 선택하려면 여기를 클릭하십시오."/>
	<label commandName="GenCallObjectivesFluid" devLabel="Remove loads and constraints or click here to select 'Objectives'." translation="하중 및 구속조건을 제거하거나 여기를 클릭하여 '목표'를 선택하십시오."/>
	<label commandName="GenCallObjectivesGravity" devLabel="Switch OFF gravity or click here to select 'Objectives'." translation="중력을 끄거나 여기를 클릭하여 '목표'를 선택할 수 있습니다."/>
	<label commandName="GenCallObstacleInterferesPreserve" devLabel="Click here to highlight the interfering geometries. Please modify the preserve or obstacle geometries and generate again." translation="간섭하는 형상을 강조 표시하려면 여기를 클릭하십시오. 유지 또는 장애물 형상을 수정하고 다시 생성하십시오."/>
	<label commandName="GenCallPreserveGeometry" devLabel="Click here to select 'Preserve Geometry'." translation="'유지 형상'을 선택하려면 여기를 클릭하십시오."/>
	<label commandName="GenCallStartingShapeGeometry" devLabel="Click here to select 'Starting Shape Geometry'." translation="'시작 형상'을 선택하려면 여기를 클릭하십시오."/>
	<label commandName="GenCallStructuralConstraint" devLabel="Click here to select 'Structural Constraints'." translation="'구조적 구속조건'을 선택하려면 여기를 클릭하십시오."/>
	<label commandName="GenCallStructuralLoad" devLabel="Click here to select 'Structural Loads'." translation="'구조 하중'을 선택하려면 여기를 클릭하십시오."/>
	<label commandName="GenStateComplete" devLabel="Generate completed" translation="생성 완료"/>
	<label commandName="GenStateFailed" devLabel="Generate failed" translation="생성 실패"/>
	<label commandName="GenStateInProgress" devLabel="Generate in progress..." translation="생성 진행 중..."/>
	<label commandName="GenStateOutOfDate" devLabel="Out of date results" translation="오래된 결과"/>
	<label commandName="GenStudies" devLabel="Generative Designs" translation="제너레이티브 디자인"/>
	<label commandName="Sim1stPrincipalStrain" devLabel="1st Principal" translation="첫 번째 주"/>
	<label commandName="Sim1stPrincipalStress" devLabel="1st Principal" translation="첫 번째 주"/>
	<label commandName="Sim2ndPrincipalStrain" devLabel="2nd Principal" translation="두 번째 주"/>
	<label commandName="Sim2ndPrincipalStress" devLabel="2nd Principal" translation="두 번째 주"/>
	<label commandName="Sim3rdPrincipalStrain" devLabel="3rd Principal" translation="세 번째 주"/>
	<label commandName="Sim3rdPrincipalStress" devLabel="3rd Principal" translation="세 번째 주"/>
	<label commandName="SimAcceleration" devLabel="Acceleration" translation="가속도"/>
	<label commandName="SimAccelerationTotal" devLabel="Total" translation="전체"/>
	<label commandName="SimAccelerationX" devLabel="X" translation="X"/>
	<label commandName="SimAccelerationY" devLabel="Y" translation="Y"/>
	<label commandName="SimAccelerationZ" devLabel="Z" translation="Z"/>
	<label commandName="SimAppliedLoad" devLabel="Applied load" translation="적용된 하중"/>
	<label commandName="SimAppliedLoadTotal" devLabel="Total" translation="전체"/>
	<label commandName="SimAppliedLoadX" devLabel="X" translation="X"/>
	<label commandName="SimAppliedLoadY" devLabel="Y" translation="Y"/>
	<label commandName="SimAppliedLoadZ" devLabel="Z" translation="Z"/>
	<label commandName="SimAppliedLoads" devLabel="Applied Loads" translation="적용된 하중"/>
	<label commandName="SimAppliedLoadsTotal" devLabel="Total" translation="전체"/>
	<label commandName="SimAppliedLoadsX" devLabel="X" translation="X"/>
	<label commandName="SimAppliedLoadsY" devLabel="Y" translation="Y"/>
	<label commandName="SimAppliedLoadsZ" devLabel="Z" translation="Z"/>
	<label commandName="SimAssetAdapterMissing" devLabel="Sim Asset Adapter is missing" translation="Sim 자산 어댑터가 누락됨"/>
	<label commandName="SimAssetIsMissing" devLabel="Asset is missing" translation="자산이 누락됨"/>
	<label commandName="SimBrowserThresholds" devLabel="Thresholds" translation="임계값"/>
	<label commandName="SimBuckling" devLabel="Buckling" translation="버클링"/>
	<label commandName="SimBucklingDisplacement" devLabel="Displacement" translation="변위"/>
	<label commandName="SimBucklingDisplacementTotal" devLabel="Total Displacement" translation="총 변위"/>
	<label commandName="SimBucklingDisplacementX" devLabel="X Displacement" translation="X 변위"/>
	<label commandName="SimBucklingDisplacementY" devLabel="Y Displacement" translation="Y 변위"/>
	<label commandName="SimBucklingDisplacementZ" devLabel="Z Displacement" translation="Z 변위"/>
	<label commandName="SimBucklingDomainPointsFmt" devLabel="Buckling Mode %=I=%: %=V=% x Load" translation="버클링 모드 %=I=%: %=V=% x 하중"/>
	<label commandName="SimBucklingDomainPointsWithUtitsFmt" devLabel="Buckling Mode %=I=%: %=V=% %=U=%" translation="버클링 모드 %=I=%: %=V=% %=U=%"/>
	<label commandName="SimBucklingRotationX" devLabel="X Rotation" translation="X 회전"/>
	<label commandName="SimBucklingRotationY" devLabel="Y Rotation" translation="Y 회전"/>
	<label commandName="SimBucklingRotationZ" devLabel="Z Rotation" translation="Z 회전"/>
	<label commandName="SimCallApplyMaterial" devLabel="Click here to select 'Study Materials' to set a material." translation="자재 설정을 위한 '학습 자재'를 선택하려면 여기를 클릭하십시오."/>
	<label commandName="SimCallInvalidObstacleSymmetryPlanes" devLabel="Click here to highlight the invalid plane(s). The obstacle geometries must be symmetrical about the defined symmetry plane(s). Consider modifying the plane(s) or the obstacle geometries." translation="잘못된 평면을 강조 표시하려면 여기를 클릭하십시오. 장애물 형상은 정의된 대칭 평면에 대해 대칭이어야 합니다. 평면 또는 장애물 형상을 수정하는 것이 좋습니다."/>
	<label commandName="SimCallInvalidPreserveSymmetryPlanes" devLabel="Click here to highlight the invalid plane(s). The preserve geometries must be symmetrical about the defined symmetry plane(s). Consider modifying the plane(s) or the preserve geometries." translation="부적합한 평면을 강조 표시하려면 여기를 클릭하십시오. 유지 형상이 정의된 대칭 평면에 대해 대칭이어야 합니다. 평면 또는 유지 형상을 수정하는 것이 좋습니다."/>
	<label commandName="SimCallInvalidTopologySymmetryPlanes" devLabel="Click here to highlight the invalid plane(s). The starting shape geometry must be symmetrical about the defined symmetry plane(s). Consider modifying the plane(s) or the starting shape geometry." translation="부적합한 평면을 강조 표시하려면 여기를 클릭하십시오. 시작 형상은 정의된 대칭 평면에 대해 대칭이어야 합니다. 평면 또는 시작 형상을 수정하는 것이 좋습니다."/>
	<label commandName="SimCallPerpendicularSymmetryPlanesCutting" devLabel="Click here to highlight the invalid plane(s). The symmetry plane(s) must not be perpendicular to the 2-axis cutting direction. Consider modifying the plane(s) or changing the cutting direction." translation="잘못된 평면을 강조 표시하려면 여기를 클릭하십시오. 대칭 평면은 2축 절단 방향에 수직이 아니어야 합니다. 평면을 수정하거나 절단 방향을 변경해 보십시오."/>
	<label commandName="SimCallPerpendicularSymmetryPlanesMilling" devLabel="Click here to highlight the invalid plane(s). The symmetry plane(s) must not be perpendicular to the 2.5-axis tool direction. Consider modifying the plane(s) or changing the tool direction." translation="잘못된 평면을 강조 표시하려면 여기를 클릭하십시오. 대칭 평면은 2.5축 공구 방향에 수직이 아니어야 합니다. 평면을 수정하거나 공구 방향을 변경해 보십시오."/>
	<label commandName="SimCallTransientStructuralLoad" devLabel="Click here to select 'Transient Loads'." translation="'과도 하중'을 선택하려면 여기를 클릭하십시오."/>
	<label commandName="SimCaseMissing" devLabel="Study is missing" translation="학습이 누락됨"/>
	<label commandName="SimCaseNameBuckling" devLabel="Study %1% - Structural Buckling" translation="학습 %1% - 구조적 버클링"/>
	<label commandName="SimCaseNameExplicit" devLabel="Study %1% - Event Simulation" translation="학습 %1% - 이벤트 시뮬레이션"/>
	<label commandName="SimCaseNameExplicitDynamic" devLabel="Study %1% - Dynamic Event Simulation" translation="학습 %1% - 동적 이벤트 시뮬레이션"/>
	<label commandName="SimCaseNameExplicitQuasiStatic" devLabel="Study %1% - Quasi-static Event Simulation" translation="학습 %1% - 준 정적 이벤트 시뮬레이션"/>
	<label commandName="SimCaseNameFreqResponse" devLabel="Study %1% - Frequency Response" translation="학습 %1% - 진동수 응답"/>
	<label commandName="SimCaseNameGenerative" devLabel="Study %1% - Structural Component" translation="학습 %1% - 구조 구성요소"/>
	<label commandName="SimCaseNameGenerativeFluids" devLabel="Study %1% - Fluid Path" translation="학습 %1% - 유체 경로"/>
	<label commandName="SimCaseNameLSS" devLabel="Study %1% - Static Stress" translation="학습 %1% - 정적 응력"/>
	<label commandName="SimCaseNameModalFreq" devLabel="Study %1% - Modal Frequencies" translation="학습 %1% - 고유 진동수"/>
	<label commandName="SimCaseNameNLLSS" devLabel="Study %1% - Nonlinear Static Stress" translation="학습 %1% - 비선형 정적 응력"/>
	<label commandName="SimCaseNameRTSS" devLabel="Study %1% - Drop Test" translation="학습 %1% - 낙하 시험"/>
	<label commandName="SimCaseNameTopOpt" devLabel="Study %1% - Shape Optimization" translation="학습 %1% - 형상 최적화"/>
	<label commandName="SimCaseNameTransientStructural" devLabel="Study %1% - Transient Structural" translation="학습 %1% - 시간에 따른 구조에 작용하는 힘"/>
	<label commandName="SimChangeComputePreloadedModes" devLabel="Click here to select 'Settings', to change the option Compute Preloaded Modes." translation="'설정'을 선택하여 사전 하중 모드 계산 옵션을 변경하려면 여기를 클릭하십시오."/>
	<label commandName="SimCommandUnitSystemName" devLabel="Override Unit System" translation="단위 시스템 재지정"/>
	<label commandName="SimConstraintReactionForce" devLabel="Reaction Force" translation="반력"/>
	<label commandName="SimConstraintReactionForceX" devLabel="X" translation="X"/>
	<label commandName="SimConstraintReactionForceY" devLabel="Y" translation="Y"/>
	<label commandName="SimConstraintReactionForceZ" devLabel="Z" translation="Z"/>
	<label commandName="SimConstraintReactionMomenX" devLabel="X" translation="X"/>
	<label commandName="SimConstraintReactionMomentY" devLabel="Y" translation="Y"/>
	<label commandName="SimConstraintReactionMomentZ" devLabel="Z" translation="Z"/>
	<label commandName="SimContactForce" devLabel="Contact force" translation="접촉력"/>
	<label commandName="SimContactForceGroup" devLabel="Contact Force" translation="접촉력"/>
	<label commandName="SimContactForceTotal" devLabel="Total" translation="전체"/>
	<label commandName="SimContactForceX" devLabel="X" translation="X"/>
	<label commandName="SimContactForceY" devLabel="Y" translation="Y"/>
	<label commandName="SimContactForceZ" devLabel="Z" translation="Z"/>
	<label commandName="SimContactForces" devLabel="Contact Forces" translation="접촉력"/>
	<label commandName="SimContactPressure" devLabel="Contact pressure" translation="접촉 압력"/>
	<label commandName="SimContactPressureGroup" devLabel="Contact Pressure" translation="접촉 압력"/>
	<label commandName="SimContactPressureTotal" devLabel="Total" translation="전체"/>
	<label commandName="SimContactPressureX" devLabel="X" translation="X"/>
	<label commandName="SimContactPressureY" devLabel="Y" translation="Y"/>
	<label commandName="SimContactPressureZ" devLabel="Z" translation="Z"/>
	<label commandName="SimContactsMissing" devLabel="Contacts are missing" translation="접촉이 누락됨"/>
	<label commandName="SimConvergencePlotResultBucklingMode" devLabel="Buckling Mode: " translation="버클링 모드: "/>
	<label commandName="SimConvergencePlotResultModalMode" devLabel="Modal Mode: " translation="모달 모드: "/>
	<label commandName="SimConvergencePlotResultMode" devLabel="Mode:" translation="모드:"/>
	<label commandName="SimConvergencePlotResultModeNumber" devLabel="Mode number" translation="모드 번호"/>
	<label commandName="SimDisplacement" devLabel="Displacement" translation="변위"/>
	<label commandName="SimDisplacementTotal" devLabel="Total Displacement" translation="총 변위"/>
	<label commandName="SimDisplacementX" devLabel="X" translation="X"/>
	<label commandName="SimDisplacementY" devLabel="Y" translation="Y"/>
	<label commandName="SimDisplacementZ" devLabel="Z" translation="Z"/>
	<label commandName="SimDropTest" devLabel="Drop Test" translation="낙하 시험"/>
	<label commandName="SimDropTestHighEndTime" devLabel="The end time is unexpectedly high compared to the impact velocity." translation="충격 속도에 비해 종료 시간이 예기치 않게 높습니다."/>
	<label commandName="SimDropTestHighVelocity" devLabel="Drop test is not designed for high-speed impacts." translation="낙하 시험은 고속 충격에 맞게 설계되지 않았습니다."/>
	<label commandName="SimDropTestLowVelocity" devLabel="Drop test is not designed for low-speed impacts." translation="낙하 시험은 저속 충격에 맞게 설계되지 않았습니다."/>
	<label commandName="SimDropTestNegativeDropHeight" devLabel="Cannot solve: Drop height cannot be negative." translation="해석할 수 없음: 낙하 높이는 음수가 될 수 없습니다."/>
	<label commandName="SimDropTestNotDefinedDistanceOrVelocity" devLabel="Cannot solve: Drop height has to be defined if initial velocity is disabled." translation="해석할 수 없음: 초기 속도가 비활성화되어 있는 경우 낙하 높이를 정의해야 합니다."/>
	<label commandName="SimDropTestNotDefinedGravityButVelocityIs" devLabel="Cannot solve: Initial velocity is defined, but missing gravity." translation="해석할 수 없음: 초기 속도가 정의되었지만 중력이 누락되었습니다."/>
	<label commandName="SimDropTestNotDefinedGravityOrVelocity" devLabel="Cannot solve: Both gravity and initial velocity are disabled." translation="해석할 수 없음: 중력 및 초기 속도가 모두 비활성화되어 있습니다."/>
	<label commandName="SimDropTestVelocityOutOfLimits" devLabel="Cannot solve: High-speed impacts are not supported." translation="해석할 수 없음: 고속 충격이 지원되지 않습니다."/>
	<label commandName="SimDuplicateElementDeletion" devLabel="Warning: %1% and %2% have been applied on the same entity. In order to create a valid setup, delete the redundant Element Deletion Criteria." translation="경고: %1% 및 %2%이(가) 동일한 도면요소에 적용되었습니다. 유효한 설정을 작성하려면 중복되는 요소 삭제 기준을 삭제하십시오."/>
	<label commandName="SimEffectivePlasticStrain" devLabel="Plastic Strain" translation="플라스틱 변형"/>
	<label commandName="SimEffectiveStrainElastic" devLabel="Effective Strain Elastic" translation="유효 변형 탄성"/>
	<label commandName="SimElemeentStatus" devLabel="NotForDisplay" translation="NotForDisplay"/>
	<label commandName="SimElementStatus" devLabel="NotForDisplay" translation="NotForDisplay"/>
	<label commandName="SimEquivalentStrain" devLabel="Equivalent" translation="동등"/>
	<label commandName="SimEventNoContactInAssembly" devLabel="Error: The model has neither contacts nor connectors defined between independent bodies." translation="오류: 모형의 독립 본체 간에 접촉과 커넥터가 정의되어 있지 않습니다."/>
	<label commandName="SimEventSimTooLongDuration" devLabel="Warning: The Total Event Duration in this study setup may make the analysis take a long time to solve. If the runtime exceeds the 12 hour limit, it will be aborted. Consider decreasing the Total Event Duration." translation="경고: 이 학습 설정의 총 이벤트 기간으로 인해 분석하는 데 시간이 오래 걸릴 수 있습니다. 런타임이 12시간 제한을 초과하면 중단됩니다. 총 이벤트 기간을 줄여 보십시오."/>
	<label commandName="SimExplicitCurveDurationGreaterThanEventDurationWarning" devLabel="The time required for the '%1%' to ramp up to its full magnitude is longer than Event Duration. Only the portion of the '%2%' ramp-up that coincides with the Event Duration is considered in the solution. Consider increasing the Event Duration or decreasing the '%3%' time to avoid false positive results." translation="전체 크기까지 '%1%'을(를) 확대하는 데 필요한 시간이 이벤트 기간보다 깁니다. 이벤트 기간과 일치하는 '%2%' 확대의 일부만 솔루션에서 고려됩니다. 이벤트 기간을 늘리거나 '%3%' 시간을 줄여 가양성 결과를 피하는 것이 좋습니다."/>
	<label commandName="SimExplicitDomainPointsFmt" devLabel="Step %=I=%: %=V=% %=U=%" translation="단계 %=I=%: %=V=% %=U=%"/>
	<label commandName="SimExplicitMaterialHardeningRuleUnsupportedWarning" devLabel="Some components are using material properties unsupported by this study type. Please note material hardening type will be run as &quot;Isotropic&quot; for this solve." translation="일부 구성요소는 이 학습 유형에서 지원하지 않는 재료 특성을 사용합니다. 재료 경화 유형은 이 해석에 대해 &quot;등방성&quot;으로 실행됩니다."/>
	<label commandName="SimExplicitMaterialYieldCriteriaUnsupportedWarning" devLabel="Some components are using material properties unsupported by this study type. Please note Yield Criteria will be run as &quot;von Mises&quot; for this solve." translation="일부 구성요소에서는 이 학습 유형에서 지원하지 않는 재료 특성을 사용하고 있습니다. 이 해석에 대해 항복 기준이 &quot;폰 미세스&quot;로 실행됩니다."/>
	<label commandName="SimExplicitNoResultSelected" devLabel="Warning: All result outputs are unchecked. Only safety factor result will be provided." translation="경고: 모든 결과 출력이 선택취소되었습니다. 안전계수 결과만 제공됩니다."/>
	<label commandName="SimFailedGenerativeMaterials" devLabel="One or more of the selected materials are invalid for a generative solution." translation="선택한 재료 중 하나 이상이 제너레이티브 솔루션에 부적합합니다."/>
	<label commandName="SimFatigue" devLabel="Fatigue" translation="피로"/>
	<label commandName="SimFreqResponse" devLabel="Frequency Response" translation="진동수 응답"/>
	<label commandName="SimFreqResponseDomainPointsFmt" devLabel="Mode %=I=%: %=V=% %=U=%" translation="모드 %=I=%: %=V=% %=U=%"/>
	<label commandName="SimFrequency" devLabel="Frequency" translation="진동수"/>
	<label commandName="SimFullResponse" devLabel="Full response" translation="전체 응답"/>
	<label commandName="SimGen2DCuttingPreCheckFaceOrientation2" devLabel="2-Axis Cutting doesn't support preserve bodies if one of the following occurs:&lt;br&gt; - External planar faces whose normals are not parallel or orthogonal to the cutting direction.&lt;br&gt; - External cylindrical faces whose axes are orthogonal to the cutting direction.&lt;br&gt;It may affect the ability to create an editable 3D design from outcomes. Consider modifying 'Preserve Geometry'." translation="다음 중 하나가 발생하는 경우 2축 절단에서 본체를 유지할 수 없습니다.&lt;br&gt; - 법선이 절단 방향에 평행하지 않거나 직교하는 외부 평면형 면.&lt;br&gt; - 축이 절단 방향에 직교하는 외부 원통형 면.&lt;br&gt;이 경우 결과에서 편집 가능한 3D 디자인을 작성하는 기능에 영향을 미칠 수 있습니다. '유지 형상'을 수정하는 것이 좋습니다."/>
	<label commandName="SimGen2DCuttingPreCheckFaceOrientation25" devLabel="2.5-Axis Milling doesn’t support preserve bodies if one of the following occurs:&lt;br&gt; - External planar faces whose normals are not parallel or orthogonal to the cutting direction.&lt;br&gt; - External cylindrical faces whose axes are orthogonal to the cutting direction.&lt;br&gt;It may affect the ability to create an editable 3D design from outcomes. Consider modifying 'Preserve Geometry'." translation="다음 중 하나가 발생하는 경우 2.5축 절단에서 본체를 유지할 수 없습니다.&lt;br&gt; - 법선이 절단 방향에 평행하지 않거나 직교하는 외부 평면형 면.&lt;br&gt; - 축이 절단 방향에 직교하는 외부 원통형 면.&lt;br&gt;이 경우 결과에서 편집 가능한 3D 디자인을 작성하는 기능에 영향을 미칠 수 있습니다. '유지 형상'을 수정하는 것이 좋습니다."/>
	<label commandName="SimGen2DCuttingPreCheckUnevenHeightWarning" devLabel="2-Axis Cutting doesn't support preserve bodies of different heights. It may affect the ability to create an editable 3D design from outcomes. Consider modifying 'Preserve Geometry'." translation="2축 절단에서는 높이가 다른 본체를 유지할 수 없습니다. 이 경우 결과에서 편집 가능한 3D 디자인을 작성하는 기능에 영향을 미칠 수 있습니다. '유지 형상'을 수정하는 것이 좋습니다."/>
	<label commandName="SimGen2Point5AxisMillingPreCheckUnevenHeightWarning" devLabel="2.5-Axis Milling doesn't support preserve bodies of different heights. It may affect the ability to create an editable 3D design from outcomes. Consider modifying 'Preserve Geometry'." translation="2.5축 밀링에서는 높이가 다른 본체를 유지할 수 없습니다. 이 경우 결과에서 편집 가능한 3D 디자인을 작성하는 기능에 영향을 미칠 수 있습니다. '유지 형상'을 수정하는 것이 좋습니다."/>
	<label commandName="SimGen3And5AxisPreCheckWarning" devLabel="The Milling 'Head Diameter' is large comparing to the model size. Review the Milling settings, model size and units." translation="밀링 '헤드 지름'이 모형 크기와 비교하여 다소 큽니다. 밀링 설정, 모형 크기 및 단위를 검토하십시오."/>
	<label commandName="SimGenAdditiveWorkplaceBoundaryCheckWarning" devLabel="The study geometry may be too large to be 3D-printed." translation="학습 형상이 너무 커서 3D로 프린트하지 못할 수 있습니다."/>
	<label commandName="SimGenBucklingInertiaRelief" devLabel="Cannot generate: The combination of Buckling and Remove rigid body modes options within the same study is not supported. Consider using them in different studies." translation="생성할 수 없음: 동일한 학습 내의 버클링 및 강체 모드 제거 옵션의 조합은 지원되지 않습니다. 다른 학습에서 사용하는 것이 좋습니다."/>
	<label commandName="SimGenDisjoinedStartingShape" devLabel="Error: Cannot solve: The starting shape body must be in contact with all preserve geometry bodies." translation="오류: 해석할 수 없음: 시작 형상 본체는 모든 유지 형상 본체와 접촉해야 합니다."/>
	<label commandName="SimGenEmptyMaterialList" devLabel="Cannot generate: Specify at least one material for each method." translation="생성할 수 없음: 각 방법에 대해 재료를 하나 이상 지정합니다."/>
	<label commandName="SimGenExceededMaterialLimit" devLabel="Cannot generate: A maximum of 7 materials may be specified." translation="생성할 수 없음: 최대 7개의 재료를 지정할 수 있습니다."/>
	<label commandName="SimGenFluidLessThanTwoPreserves" devLabel="Cannot generate: Please specify at least two geometries to preserve." translation="생성할 수 없음: 유지할 형상을 두 개 이상 지정하십시오."/>
	<label commandName="SimGenFluidsMultipleLoadCase" devLabel="Cannot generate: The Generative Fluids solver doesn't support multiple load cases. Please make sure only a single load case is defined." translation="생성할 수 없음: 제너레이티브 유체 솔버가 여러 하중 사례를 지원하지 않습니다. 하중 사례가 하나만 정의되었는지 확인하십시오."/>
	<label commandName="SimGenFluidsNoStartingShape" devLabel="Warning: A starting shape is not defined. Defining the starting shape is recommended." translation="경고: 시작 형상이 정의되지 않았습니다. 시작 형상을 정의하는 것이 좋습니다."/>
	<label commandName="SimGenInsufficientPreserves" devLabel="Only one preserve body is specified. If this is intended you can ignore this warning." translation="유지 본체가 하나만 지정되어 있습니다. 의도된 경우에는 이 경고를 무시할 수 있습니다."/>
	<label commandName="SimGenInvalidMaterial" devLabel="Cannot generate: &quot;%1%&quot; has invalid or missing properties." translation="생성할 수 없음: &quot;%1%&quot;에 잘못되었거나 누락된 특성이 있습니다."/>
	<label commandName="SimGenManufacturingMaterialsBrowserEntryName" devLabel="Materials" translation="재료"/>
	<label commandName="SimGenNoManufacturingMethod" devLabel="Cannot generate: Please specify at least one manufacturing method." translation="생성할 수 없음: 하나 이상의 제조 방법을 지정하십시오."/>
	<label commandName="SimGenNoPreserves" devLabel="Cannot generate: Please specify at least one, preferably two geometries to preserve." translation="생성할 수 없음: 최소한 하나(2개 권장)의 형상을 유지하도록 지정하십시오."/>
	<label commandName="SimGenNoStartingShapes" devLabel="Warning: The Starting Shape body is missing in &quot;%1%&quot;." translation="경고: 시작 형상 본체가 &quot;%1%&quot;에 없습니다."/>
	<label commandName="SimGenPrecheckDisabled" devLabel="SimBaseUI.DisableGenerativePrecheck is set to 1, all prechecks are off." translation="SimBaseUI.DisableGenerativePrecheck가 1로 설정되어 있으며 사전 확인이 모두 꺼져 있습니다."/>
	<label commandName="SimGenSomeLostObstacles" devLabel="Warning: An Obstacle body is missing in &quot;%1%&quot;." translation="경고: 장애물 본체가 &quot;%1%&quot;에서 누락되었습니다."/>
	<label commandName="SimGenSomeLostPreserves" devLabel="Warning: A Preserve body is missing in &quot;%1%&quot;." translation="경고: 유지 본체가 &quot;%1%&quot;에서 누락되었습니다."/>
	<label commandName="SimGenSomeLostSymmetryPlanes" devLabel="Warning: A Symmetry Plane is missing in &quot;%1%&quot;." translation="경고: 대칭 평면이 &quot;%1%&quot;에서 누락되었습니다."/>
	<label commandName="SimGenerative" devLabel="Structural Component" translation="구조 구성요소"/>
	<label commandName="SimGenerativeAdditiveMethodGroup" devLabel="Additive" translation="적층"/>
	<label commandName="SimGenerativeAllMethodssGroup" devLabel="All methods" translation="모든 방법"/>
	<label commandName="SimGenerativeCuttingMethodGroup" devLabel="2-axis Cutting" translation="2축 절단"/>
	<label commandName="SimGenerativeDieCastingMethodGroup" devLabel="Casting" translation="캐스팅"/>
	<label commandName="SimGenerativeFluids" devLabel="Fluid Path" translation="유체 경로"/>
	<label commandName="SimGenerativeMillingMethodGroup" devLabel="Milling" translation="밀링"/>
	<label commandName="SimGenerativeUnrestrictedMethodGroup" devLabel="Unrestricted" translation="무제한"/>
	<label commandName="SimHiddenBodiesOrComponentsWarningGen" devLabel="Warning: Some bodies or components are hidden. If they are assigned obstacle, preserve, or starting shape geometry, they still participate in the outcome generation. To exclude bodies from the generation, remove them in the Edit Model workspace or don't assign a geometry type to them." translation="경고: 일부 본체 또는 구성요소가 숨겨져 있습니다. 장애물, 유지 또는 시작 형상이 할당된 경우 결과 생성에 계속 참여합니다. 생성에서 본체를 제외하려면 모형 편집 작업공간에서 제거하거나 형상 유형을 할당하지 마십시오."/>
	<label commandName="SimHiddenSettingsWarningGen" devLabel="Warning: Visibility is turned off for some Loads or Constraints. Hidden Loads and Constraints will still participate in the outcome generation. To exclude them from the generation, use the &quot;Toggle Suppress&quot; command in the browser." translation="경고: 일부 하중 또는 구속조건에 대해 가시성이 꺼져 있습니다. 숨겨진 하중 및 구속조건은 결과 생성에 계속 포함됩니다. 생성에서 해당 하중 및 구속조건을 제외하려면 브라우저에서 &quot;억제 전환&quot; 명령을 사용합니다."/>
	<label commandName="SimHiddenSettingsWarningGenFluid" devLabel="Warning: Visibility is turned off for some Fluid Conditions. Hidden Flow Sources will still participate in the outcome generation. To exclude them from the generation, use the &quot;Toggle Suppress&quot; command in the browser." translation="경고: 일부 유체 조건에 대해 가시성이 꺼져 있습니다. 숨겨진 흐름 소스는 결과 생성에 계속 포함됩니다. 생성에서 해당 흐름 소스를 제외하려면 브라우저에서 &quot;억제 전환&quot; 명령을 사용합니다."/>
	<label commandName="SimHiddenSymmetryPlanesWarningGen" devLabel="Warning: Some construction planes are hidden. If they are defined as symmetry planes, they are still included in the outcome generation.&#xA;To show hidden planes, under the Construction node in the browser, click the Visible icon.&#xA;To exclude hidden planes from the outcome generation, use the Symmetry plane dialog to deselect them." translation="경고: 일부 생성 평면이 숨겨져 있습니다. 대칭 평면으로 정의된 경우에도 해당 평면은 결과 생성에 계속 포함됩니다.&#xA;숨겨진 평면을 표시하려면 브라우저의 생성 노드 아래에서 표시 아이콘을 클릭합니다.&#xA;결과 생성에서 숨겨진 평면을 제외하려면 대칭 평면 대화상자를 사용하여 해당 평면을 선택 해제합니다."/>
	<label commandName="SimInchImperialUnitSystemName" devLabel="U.S. (in)" translation="미국(in)"/>
	<label commandName="SimInvalidLocalDisplacementLocation" devLabel="Warning: Some local displacement locations are invalid.&#xA;&#xA;It looks like some local displacements are assigned to the deleted bodies.To use them in your study, select another location that belongs to the preserve geometry in the Objectives and Limits dialog." translation="경고: 일부 로컬 변위 위치가 잘못되었습니다.&#xA;&#xA;일부 로컬 변위가 삭제된 바디에 지정된 것 같습니다. 이러한 변위를 학습에서 사용하려면 목표 및 한계 대화상자에서 유지 형상에 속하는 다른 위치를 선택하십시오."/>
	<label commandName="SimInvalidSymmetryPlanesWarningGen" devLabel="Warning: Some planes do not meet the symmetrical setup requirements. Click this message for more information." translation="경고: 일부 평면이 대칭 설정 요구 사항을 충족하지 않습니다. 자세한 내용을 보려면 이 메시지를 클릭하십시오."/>
	<label commandName="SimLSS" devLabel="Static Stress" translation="정적 응력"/>
	<label commandName="SimLoadMultiplier" devLabel="Load Multiplier" translation="하중 승수"/>
	<label commandName="SimLoadsWhenPreloadedModesAreOff" devLabel="Loads are not considered for the analysis. To include them, check Compute Preloaded Modes in the Settings dialog." translation="하중은 분석에 고려되는 요소가 아닙니다. 이러한 하중을 포함하려면 설정 대화상자에서 사전 하중 모드 계산을 확인하십시오."/>
	<label commandName="SimMeshRefinementMultipleLoadCaseWarning" devLabel="Mesh refinement is not allowed for a study with multiple active load cases. Suppress the additional load cases, then change the study settings to remove mesh refinements." translation="활성 하중 케이스가 여러 개인 학습에는 메쉬 미세 조정이 허용되지 않습니다. 추가 하중 케이스를 억제한 다음, 학습 설정을 변경하여 메쉬 미세 조정을 제거하십시오."/>
	<label commandName="SimModal" devLabel="Modal" translation="모달"/>
	<label commandName="SimModalDisplacement" devLabel="Displacement" translation="변위"/>
	<label commandName="SimModalDisplacementTotal" devLabel="Total Modal Displacement" translation="총 모달 변위"/>
	<label commandName="SimModalDisplacementX" devLabel="Modal Displacement X" translation="모달 변위 X"/>
	<label commandName="SimModalDisplacementY" devLabel="Modal Displacement Y" translation="모달 변위 Y"/>
	<label commandName="SimModalDisplacementZ" devLabel="Modal Displacement Z" translation="모달 변위 Z"/>
	<label commandName="SimModalDomainPointsFmtMode" devLabel="Mode %=I=%: %=V=% %=U=%" translation="모드 %=I=%: %=V=% %=U=%"/>
	<label commandName="SimModalFrequencies" devLabel="Modal Frequencies" translation="고유 진동수"/>
	<label commandName="SimModalRotationX" devLabel="Modal Rotation X" translation="모달 회전 X"/>
	<label commandName="SimModalRotationY" devLabel="Modal Rotation Y" translation="모달 회전 Y"/>
	<label commandName="SimModalRotationZ" devLabel="Modal Rotation Z" translation="모달 회전 Z"/>
	<label commandName="SimNLSSDomainPointsFmt" devLabel="Step %=I=%: %=V=% %=U=%" translation="단계 %=I=%: %=V=% %=U=%"/>
	<label commandName="SimNoStructuralLoadInModal" devLabel="Cannot solve: Since the option Compute Preloaded Modes is on, there are missing structural loads and/or constraints%1%." translation="해석할 수 없음: 사전 하중 모드 계산 옵션이 켜져 있기 때문에 구조 하중 및/또는 구속조건이 누락되었습니다. %1%."/>
	<label commandName="SimNodetStatus" devLabel="NotForDisplay" translation="NotForDisplay"/>
	<label commandName="SimNonlinearExplicit" devLabel="Event Simulation" translation="이벤트 시뮬레이션"/>
	<label commandName="SimNonlinearExplicitDynamic" devLabel="Dynamic Event Simulation" translation="동적 이벤트 시뮬레이션"/>
	<label commandName="SimNonlinearExplicitQuasiStatic" devLabel="Quasi-static Event Simulation" translation="준 정적 이벤트 시뮬레이션"/>
	<label commandName="SimNonlinearStaticStress" devLabel="Nonlinear Static Stress" translation="비선형 정적 응력"/>
	<label commandName="SimObstacleInterferesPreserveErrorGen" devLabel="Cannot generate: Some preserve geometries are interfering with the obstacle geometries. Click this message for more information." translation="생성할 수 없음: 일부 유지 형상이 장애물 형상을 간섭합니다. 자세한 내용을 보려면 이 메시지를 클릭하십시오."/>
	<label commandName="SimObstacleInterferesPreserveErrorStatus" devLabel="Some pre-checks have identified potential issues:&#xA;Large, complex models can cause problems with generating outcomes. Please check your model or simplify it if possible." translation="일부 사전 확인에서 잠재적 문제를 식별했습니다.&#xA;크고 복잡한 모형은 결과 생성 시 문제를 일으킬 수 있습니다. 모형을 확인하거나 가능한 경우 모형을 단순화하십시오."/>
	<label commandName="SimPerpendicularSymmetryPlanesWarningGen" devLabel="Warning: Some planes do not meet the symmetrical setup requirements. Click this message for more information." translation="경고: 일부 평면이 대칭 설정 요구 사항을 충족하지 않습니다. 자세한 내용을 보려면 이 메시지를 클릭하십시오."/>
	<label commandName="SimPlasticStrain" devLabel="Plastic Strain" translation="플라스틱 변형"/>
	<label commandName="SimRTSSDomainPointsFmt" devLabel="Time %=I=%: %=V=% %=U=%" translation="시간 %=I=%: %=V=% %=U=%"/>
	<label commandName="SimReactionForce" devLabel="Reaction force" translation="반력"/>
	<label commandName="SimReactionForceTotal" devLabel="Total" translation="전체"/>
	<label commandName="SimReactionForceX" devLabel="X" translation="X"/>
	<label commandName="SimReactionForceY" devLabel="Y" translation="Y"/>
	<label commandName="SimReactionForceZ" devLabel="Z" translation="Z"/>
	<label commandName="SimRelativeResponse" devLabel="Relative response" translation="상대 반응"/>
	<label commandName="SimRotation" devLabel="Rotation" translation="회전"/>
	<label commandName="SimRotationX" devLabel="X" translation="X"/>
	<label commandName="SimRotationXRotation" devLabel="Rotation X" translation="회전 X"/>
	<label commandName="SimRotationY" devLabel="Y" translation="Y"/>
	<label commandName="SimRotationYRotation" devLabel="Rotation Y" translation="회전 Y"/>
	<label commandName="SimRotationZ" devLabel="Z" translation="Z"/>
	<label commandName="SimRotationZRotation" devLabel="Rotation Z" translation="회전 Z"/>
	<label commandName="SimSICustomUnitSystemName" devLabel="Custom" translation="사용자 설정"/>
	<label commandName="SimSIMetricUnitSystemName" devLabel="Metric (SI)" translation="미터법(SI)"/>
	<label commandName="SimSafetyFactor" devLabel="Safety Factor" translation="안전계수"/>
	<label commandName="SimSafetyFactorPerBodySetting" devLabel="Safety Factor (Per Body)" translation="안전계수(본체당)"/>
	<label commandName="SimSelectionReference" devLabel="Selection Reference " translation="선택 참조 "/>
	<label commandName="SimStrain" devLabel="Strain" translation="변형"/>
	<label commandName="SimStrainXX" devLabel="Normal XX" translation="법선 XX"/>
	<label commandName="SimStrainXY" devLabel="Shear XY" translation="전단 XY"/>
	<label commandName="SimStrainXZ" devLabel="Shear ZX" translation="전단 ZX"/>
	<label commandName="SimStrainYY" devLabel="Normal YY" translation="법선 YY"/>
	<label commandName="SimStrainYZ" devLabel="Shear YZ" translation="전단 YZ"/>
	<label commandName="SimStrainZZ" devLabel="Normal ZZ" translation="법선 ZZ"/>
	<label commandName="SimStress" devLabel="Stress" translation="응력"/>
	<label commandName="SimStressXX" devLabel="Normal XX" translation="법선 XX"/>
	<label commandName="SimStressXY" devLabel="Shear XY" translation="전단 XY"/>
	<label commandName="SimStressXZ" devLabel="Shear ZX" translation="전단 ZX"/>
	<label commandName="SimStressYY" devLabel="Normal YY" translation="법선 YY"/>
	<label commandName="SimStressYZ" devLabel="Shear YZ" translation="전단 YZ"/>
	<label commandName="SimStressZZ" devLabel="Normal ZZ" translation="법선 ZZ"/>
	<label commandName="SimStructuralBuckling" devLabel="Structural Buckling" translation="구조적 버클링"/>
	<label commandName="SimSumAcceleration" devLabel="Total" translation="전체"/>
	<label commandName="SimSumBucklingRotation" devLabel="Total Rotation" translation="총 회전"/>
	<label commandName="SimSumConstraintReactionForce" devLabel="Total" translation="전체"/>
	<label commandName="SimSumConstraintReactionMoment" devLabel="Total" translation="전체"/>
	<label commandName="SimSumDisplacement" devLabel="Total" translation="전체"/>
	<label commandName="SimSumModalRotation" devLabel="Total Modal Rotation" translation="총 모달 회전"/>
	<label commandName="SimSumRotation" devLabel="Total" translation="전체"/>
	<label commandName="SimSumRotationTotalRotation" devLabel="Total Rotation" translation="총 회전"/>
	<label commandName="SimSumVelocity" devLabel="Total" translation="전체"/>
	<label commandName="SimTargetResult" devLabel=" (target)" translation=" (대상)"/>
	<label commandName="SimTime" devLabel="Time" translation="시간"/>
	<label commandName="SimTopologyOptimization" devLabel="Shape Optimization" translation="형상 최적화"/>
	<label commandName="SimTopologyOptimizationDensity" devLabel="Load Path Criticality" translation="하중 경로 임계도"/>
	<label commandName="SimTotalDisplacement" devLabel="Displacement, Total" translation="변위, 총"/>
	<label commandName="SimTransStructDomainPointsFmt" devLabel="Time %=I=%: %=V=% %=U=%" translation="시간 %=I=%: %=V=% %=U=%"/>
	<label commandName="SimTransientStructural" devLabel="Transient Structural" translation="시간에 따른 구조에 작용하는 힘"/>
	<label commandName="SimUnitPercentage" devLabel="Percentage" translation="퍼센트"/>
	<label commandName="SimUnitPieces" devLabel="Pieces" translation="조각"/>
	<label commandName="SimUnitsAcceleration" devLabel="Acceleration" translation="가속도"/>
	<label commandName="SimUnitsAngle" devLabel="Angle" translation="각도"/>
	<label commandName="SimUnitsCurrent" devLabel="Current" translation="현재"/>
	<label commandName="SimUnitsElectricalResistance" devLabel="Electrical Resistance" translation="전기 저항"/>
	<label commandName="SimUnitsEnergy" devLabel="Energy" translation="에너지"/>
	<label commandName="SimUnitsForce" devLabel="Force" translation="힘"/>
	<label commandName="SimUnitsLength" devLabel="Length" translation="길이"/>
	<label commandName="SimUnitsMass" devLabel="Mass" translation="질량"/>
	<label commandName="SimUnitsPower" devLabel="Power" translation="동력"/>
	<label commandName="SimUnitsPressure" devLabel="Pressure" translation="압력"/>
	<label commandName="SimUnitsTemprature" devLabel="Temperature" translation="온도"/>
	<label commandName="SimUnitsTime" devLabel="Time" translation="시간"/>
	<label commandName="SimUnitsVelocity" devLabel="Velocity" translation="속도"/>
	<label commandName="SimUnitsViscosity" devLabel="Viscosity" translation="점도"/>
	<label commandName="SimUnitsVoltage" devLabel="Voltage" translation="전압"/>
	<label commandName="SimUnitsVolumeFlowRate" devLabel="Flow Rate" translation="유량"/>
	<label commandName="SimVelocity" devLabel="Velocity" translation="속도"/>
	<label commandName="SimVelocityTotal" devLabel="Total" translation="전체"/>
	<label commandName="SimVelocityX" devLabel="X" translation="X"/>
	<label commandName="SimVelocityY" devLabel="Y" translation="Y"/>
	<label commandName="SimVelocityZ" devLabel="Z" translation="Z"/>
	<label commandName="SimVonMisesStress" devLabel="von Mises" translation="폰 미세스"/>
	<label commandName="StudyManufacturingMethodsAdditive" devLabel="Additive" translation="적층"/>
	<label commandName="StudyManufacturingMethodsCutting" devLabel="2-axis Cutting" translation="2축 절단"/>
	<label commandName="StudyManufacturingMethodsDieCasting" devLabel="Casting" translation="캐스팅"/>
	<label commandName="StudyManufacturingMethodsMilling" devLabel="Milling" translation="밀링"/>
	<label commandName="StudyManufacturingMethodsUnrestricted" devLabel="Unrestricted" translation="무제한"/>
</Resource>