<?xml version="1.0" encoding="utf-8"?><Resource>
	<label commandName="A360ContentNotAvailable" devLabel="This file is being saved currently, please wait" translation="현재 이 파일을 저장하는 중입니다. 기다려 주십시오."/>
	<label commandName="AddMaterialError" devLabel="Material could not be added to document." translation="재료를 문서에 추가할 수 없습니다."/>
	<label commandName="AddMaterialExistsError" devLabel="Material could not be added. An equivalent material is already present in the document." translation="재료를 추가할 수 없습니다. 등가 재료가 문서에 이미 있습니다."/>
	<label commandName="Align" devLabel="Align" translation="정렬"/>
	<label commandName="AlignMate" devLabel=" (Align)" translation=" (정렬)"/>
	<label commandName="AlignTangent" devLabel=" (Tangent)" translation="(접선)"/>
	<label commandName="Angle" devLabel="Angle" translation="각도"/>
	<label commandName="AngleConstraint" devLabel="Angle " translation="각도 "/>
	<label commandName="AngleMate" devLabel=" (Angle)" translation=" (각도)"/>
	<label commandName="AppearanceCIStr" devLabel="AppearanceCI" translation="AppearanceCI"/>
	<label commandName="AppearanceStr" devLabel="Appearance" translation="모양"/>
	<label commandName="AssyConstraintsSelectionId" devLabel="Joints" translation="접합"/>
	<label commandName="CenterConstraint" devLabel="Center " translation="중심 "/>
	<label commandName="ComponentInstanceSelectionCategory" devLabel="Components" translation="구성요소"/>
	<label commandName="ComponentInstanceSelectionId" devLabel="Component Instance" translation="구성요소 복제"/>
	<label commandName="ComponentInstancesSelectionId" devLabel="Component Instances" translation="구성요소 복제"/>
	<label commandName="ConstraintSelectionID" devLabel="GeomConstraint" translation="기하학 구속조건"/>
	<label commandName="ConstraintSetDefaultName" devLabel="Constraint Set" translation="구속조건 세트"/>
	<label commandName="ConstraintSetTooltipMultiComp" devLabel="%1% constraints between %2% components." translation="%2%개 구성요소 사이의 %1% 구속조건."/>
	<label commandName="ConstraintSetTooltipTwoComp" devLabel="%1% constraints between %2% and %3%." translation="%2%과(와) %3% 사이의 %1% 구속조건."/>
	<label commandName="ConstraintTypeCenter" devLabel="Center" translation="중심"/>
	<label commandName="ContactSetName" devLabel="ContactSet" translation="접촉 세트"/>
	<label commandName="ContactSetSelectionId" devLabel="Contact Set" translation="접촉 세트"/>
	<label commandName="ContactSetsSelectionId" devLabel="Contact Sets" translation="접촉 세트"/>
	<label commandName="ContextFolderTooltip" devLabel="Cached objects from a dissolved Assembly Context" translation="분해된 조립품 컨텍스트에서 캐시된 객체"/>
	<label commandName="CoordinateSystemCategory" devLabel="Coordinate Systems" translation="좌표계"/>
	<label commandName="CoordinateSystemDefaultUserName" devLabel="User Coordinate System" translation="사용자 좌표계"/>
	<label commandName="CoordinateSystemSelectionId" devLabel="User Coordinate System" translation="사용자 좌표계"/>
	<label commandName="CoordinateSystemsSelectionId" devLabel="User Coordinate Systems" translation="사용자 좌표계"/>
	<label commandName="CustomJointOccurrenceSelectionId" devLabel="GeometricRelationship Occurrence" translation="기하학적 관계 발생"/>
	<label commandName="CustomJointOccurrencesSelectionId" devLabel="GeometricRelationship Occurrences" translation="기하학적 관계 발생"/>
	<label commandName="CustomJointSelectionId" devLabel="GeometricRelationship" translation="기하학적 관계"/>
	<label commandName="CustomJointSelectionPluralId" devLabel="CustomJoints" translation="사용자 정의 접합"/>
	<label commandName="CyclicDependencyNotAllowed" devLabel="Cannot insert %1% into %2% because it will create a circular reference." translation="%1%은(는) 순환 참조를 작성하므로 %2%에 삽입할 수 없습니다."/>
	<label commandName="CyclicDependencyNotAllowed2" devLabel="Cannot insert %1% into %2% because if you undo or redo recent actions in these designs it will create a circular reference.&#xA;&#xA;Save, close, and reopen the designs to clear the undo history." translation="이러한 디자인에서 최근 작업을 명령취소하거나 다시 실행하면 순환 참조가 작성되므로 %1%을(를) %2%에 삽입할 수 없습니다.&#xA;&#xA;디자인을 저장하고 닫았다가 다시 열어 실행 취소 기록을 지웁니다."/>
	<label commandName="CyclicDependencyNotAllowedReplace" devLabel="Cannot replace %1% with %2% in %3% because it will create a circular reference." translation="순환 참조를 만들기 때문에 %1%을(를) %3%에서 %2%(으)로 대체할 수 없습니다."/>
	<label commandName="CyclicDependencyNotAllowedReplace2" devLabel="Cannot replace %1% with %2% in %3% because if you undo or redo recent actions in these designs it will create a circular reference.&#xA;&#xA;Save, close, and reopen the designs to clear the undo history." translation="이러한 디자인에서 최근 작업을 명령취소하거나 다시 실행하면 순환 참조가 작성되므로 %1%을(를) %3%에서 %2%(으)로 대치할 수 없습니다.&#xA;&#xA;디자인을 저장하고 닫았다가 다시 열어 실행 취소 기록을 지웁니다."/>
	<label commandName="DeleteDocMaterialNotExistError1" devLabel="Material could not be deleted. This material is not present in the document." translation="재료를 삭제할 수 없습니다. 이 재료는 문서에 없습니다."/>
	<label commandName="DeleteDocMaterialNotExistError2" devLabel="There was a problem in deleting materials. Some of the materials might not be present in the document." translation="삭제하는 동안 문제가 발생했습니다. 일부 재료가 나타나지 않을 수 있습니다."/>
	<label commandName="FailedProjectInfoFetch" devLabel="Failed to fetch project information for document %1%" translation="문서 %1%에 대한 프로젝트 정보 가져오기 실패"/>
	<label commandName="FailedToGetProjectInfo" devLabel="Failed to fetch project information for inserted design" translation="삽입한 디자인에 대한 프로젝트 정보 가져오기 실패"/>
	<label commandName="GetAllLatest" devLabel="Get All Latest" translation="최신 버전 모두 가져오기"/>
	<label commandName="GetLatest" devLabel="Get Latest" translation="최신 버전 가져오기"/>
	<label commandName="InsertComponentRequest:CyclicReference" devLabel="Target asset is already a parent reference of the source asset." translation="대상 자산이 이미 원본 자산의 상위 참조입니다."/>
	<label commandName="InsertComponentRequest:NonCloudDocument" devLabel="Please upload the source document and try again." translation="원본 문서를 업로드한 후 다시 시도하십시오."/>
	<label commandName="InsertComponentRequest:ReadOnly" devLabel="Unable to insert source component into a read only asset." translation="원본 구성요소를 읽기 전용 자산에 삽입할 수 없습니다."/>
	<label commandName="InsertComponentRequest:SameSourceTarget" devLabel="The target component is the same as the source component. Please select a different target component and try again." translation="대상 구성요소가 원본 구성요소와 동일합니다. 다른 대상 구성요소를 선택한 다음 다시 시도하십시오."/>
	<label commandName="InsertConstraint" devLabel="Align " translation="정렬 "/>
	<label commandName="InsertMate" devLabel="Align (Concentric)" translation="정렬(동심)"/>
	<label commandName="IntersectionAnalysisInvalidBody" devLabel="An invalid body has been selected for Intersection Analysis" translation="교차점 분석에 대해 잘못된 본체가 선택되었습니다."/>
	<label commandName="InvalidTargetComponent" devLabel="Invalid target component" translation="유효하지 않은 대상 구성요소"/>
	<label commandName="JointAngleConflictMessage" devLabel="Angle conflict due to %1%" translation="%1%(으)로 인한 각도 충돌"/>
	<label commandName="JointBallName" devLabel="Ball" translation="볼"/>
	<label commandName="JointBallPlaneName" devLabel="BallPlane" translation="BallPlane"/>
	<label commandName="JointBallSlotName" devLabel="BallSlot" translation="BallSlot"/>
	<label commandName="JointCategory" devLabel="Joints" translation="접합"/>
	<label commandName="JointConflictDefinition" devLabel="joint type" translation="접합 유형"/>
	<label commandName="JointConflictLocked" devLabel="locked value" translation="잠긴 값"/>
	<label commandName="JointConflictMaximum" devLabel="Maximum value limit" translation="최대값 제한"/>
	<label commandName="JointConflictMinimum" devLabel="Minimum value limit" translation="최소값 한계"/>
	<label commandName="JointCylindricalName" devLabel="Cylindrical" translation="원통형"/>
	<label commandName="JointDOFAngleName" devLabel="Rotate" translation="회전"/>
	<label commandName="JointDOFDistanceName" devLabel="Slide" translation="슬라이드"/>
	<label commandName="JointDOFDistanceNamePlanar1" devLabel="Slide 1" translation="슬라이드 1"/>
	<label commandName="JointDOFDistanceNamePlanar2" devLabel="Slide 2" translation="슬라이드 2"/>
	<label commandName="JointDOFPitchName" devLabel="Pitch" translation="피치"/>
	<label commandName="JointDOFRollName" devLabel="Roll" translation="롤"/>
	<label commandName="JointDOFSelectionId" devLabel="Joint DOF" translation="접합 DOF"/>
	<label commandName="JointDOFSelectionRelationshipId" devLabel="Joint DOF Relationship" translation="접합 DOF 관계"/>
	<label commandName="JointDOFSelectionRelationshipsId" devLabel="Joint DOF Relationships" translation="접합 DOF 관계"/>
	<label commandName="JointDOFYawName" devLabel="Yaw" translation="좌우"/>
	<label commandName="JointDOFsSelectionId" devLabel="Joint DOFs" translation="접합 DOF"/>
	<label commandName="JointDistanceConflictMessage" devLabel="Distance conflict due to %1%" translation="%1%(으)로 인한 거리 충돌"/>
	<label commandName="JointOccurrenceSelectionId" devLabel="Joint Occurrence" translation="접합 발생"/>
	<label commandName="JointOccurrencesSelectionId" devLabel="Joint Occurrences" translation="접합 발생"/>
	<label commandName="JointOriginCategory" devLabel="Joint Origins" translation="접합 원점"/>
	<label commandName="JointOriginDefaultUserName" devLabel="Joint Origin" translation="접합 원점"/>
	<label commandName="JointOriginSelectionId" devLabel="Joint Origin" translation="접합 원점"/>
	<label commandName="JointOriginsSelectionId" devLabel="Joint Origins" translation="접합 원점"/>
	<label commandName="JointPinPlaneName" devLabel="Planar" translation="평면형"/>
	<label commandName="JointPinSlotName" devLabel="Pin-Slot" translation="핀-슬롯"/>
	<label commandName="JointPlanarName" devLabel="PlaneSlide" translation="PlaneSlide"/>
	<label commandName="JointRevoluteName" devLabel="Revolute" translation="회전"/>
	<label commandName="JointRigidGroupName" devLabel="Rigid Group" translation="강체 그룹"/>
	<label commandName="JointRigidName" devLabel="Rigid" translation="강체"/>
	<label commandName="JointRollPlaneName" devLabel="RollPlane" translation="RollPlane"/>
	<label commandName="JointSelectionId" devLabel="Joint" translation="접합"/>
	<label commandName="JointSelectionPluralId" devLabel="Joints" translation="접합"/>
	<label commandName="JointSliderName" devLabel="Slider" translation="슬라이더"/>
	<label commandName="JointTooltip" devLabel="%1%&lt;br&gt;&lt;br&gt;%2% joint between %3% and %4%" translation="%3% 및 %4% 사이의 %1%&lt;br&gt;&lt;br&gt;%2% 접합"/>
	<label commandName="JointTooltip1" devLabel="%1%&lt;br&gt;&lt;br&gt;%2% contains &lt;br&gt; %3% components &lt;br&gt;&lt;br&gt; Click to select group." translation="%1%&lt;br&gt;&lt;br&gt;%2%에 &lt;br&gt;%3% 구성요소가 포함되어 있습니다. &lt;br&gt; &lt;br&gt; 그룹을 선택하려면 클릭하십시오."/>
	<label commandName="JointTooltip2" devLabel="%1%&lt;br&gt;&lt;br&gt;%2% joint between %3% and %4% &lt;br&gt;&lt;br&gt; Click to select group." translation="%3% 및 %4% 사이의 %1%&lt;br&gt;&lt;br&gt;%2% 접합 &lt;br&gt;&lt;br&gt; 그룹을 선택하려면 클릭하십시오."/>
	<label commandName="MateOffsetAngleConflictMessage" devLabel="%1%’s Offset Angle conflicts with an existing assembly relationship." translation="%1%의 간격띄우기 각도가 기존 조립품 관계와 충돌합니다."/>
	<label commandName="MateOffsetAngleConflictTitle" devLabel="Offset Angle Conflict" translation="간격띄우기 각도 충돌"/>
	<label commandName="MateOffsetDistanceConflictMessage" devLabel="%1%’s Offset Distance conflicts with an existing assembly relationship." translation="%1%의 간격띄우기 거리가 기존 조립품 관계와 충돌합니다."/>
	<label commandName="MateOffsetDistanceConflictTitle" devLabel="Offset Distance Conflict" translation="간격띄우기 거리 충돌"/>
	<label commandName="MateTooltipTwoComp" devLabel="Constraint between %1% &lt;br&gt;and %2%." translation="%1%과(와) %2% 사이의 &lt;br&gt;구속조건."/>
	<label commandName="MidplaneMate" devLabel=" (Center)" translation="(중심)"/>
	<label commandName="MotionLinkName" devLabel="Motion Link" translation="동작 링크"/>
	<label commandName="MotionStudyName" devLabel="MotionStudy-" translation="모션스터디-"/>
	<label commandName="MultiConstraint" devLabel="Constraints" translation="구속조건"/>
	<label commandName="NotAllowImportSelf" devLabel="A document cannot be inserted into itself." translation="문서는 해당 문서 내부에 삽입할 수 없습니다."/>
	<label commandName="OffsetWorkPlaneFromTwoPlanesRequestGenericError" devLabel="Offset Work Plane failed due to invalid input" translation="유효하지 않은 입력으로 인해 간격띄우기 작업 평면 실패"/>
	<label commandName="PhysicalMaterialStr" devLabel="Physical Material" translation="물리적 재질"/>
	<label commandName="PlasticRuleStr" devLabel="Plastic Rule" translation="플라스틱 규칙"/>
	<label commandName="PositionType" devLabel="Position Type: " translation="위치 유형: "/>
	<label commandName="Project" devLabel="Project" translation="프로젝트"/>
	<label commandName="PropertiesStr" devLabel="Properties" translation="특성"/>
	<label commandName="ReplaceDocMaterialError" devLabel="Material could not be replaced in the document." translation="문서에서 재료를 대체할 수 없습니다."/>
	<label commandName="ReplaceDocRemoveMaterialError" devLabel="The Old material could not be removed from the document, possibly because it is the default material." translation="이전 재료를 문서에서 제거할 수 없습니다. 해당 재료가 기본 재료이기 때문일 수 있습니다."/>
	<label commandName="SaveXRefDoc_MissingLink" devLabel="Failed to save external document due to missing link." translation="링크가 누락되어 외부 문서를 저장하지 못했습니다."/>
	<label commandName="SelectedConfigurationStr" devLabel="Insert" translation="삽입"/>
	<label commandName="SelectionGroupRequestWarning" devLabel="Warning: Some selections could not be added to the selection set" translation="경고: 일부 선택 항목은 선택 세트에 추가할 수 없습니다."/>
	<label commandName="SelectionMate" devLabel="Selection: " translation="선택:"/>
	<label commandName="SheetMetalRuleStr" devLabel="Sheet Metal Rule" translation="판금 규칙"/>
	<label commandName="SingleConstraint" devLabel="Constraint" translation="구속조건"/>
	<label commandName="TangentConstraint" devLabel="Tangent " translation="접선 "/>
	<label commandName="TangentMate" devLabel="Tangent" translation="접선"/>
	<label commandName="TangentRelationshipConstrName" devLabel="TangentRelationship" translation="접선 관계"/>
	<label commandName="TargetDocumentNotFound" devLabel="Target document not found!!" translation="대상 문서를 찾을 수 없음!"/>
	<label commandName="TransitionalRelationshipCategory" devLabel="TransitionalRelationships" translation="변이 관계"/>
	<label commandName="TransitionalRelationshipOccurrenceSelectionId" devLabel="TransitionalRelationship Occurrence" translation="변이 관계 발생"/>
	<label commandName="TransitionalRelationshipOccurrencesSelectionId" devLabel="TransitionalRelationship Occurrences" translation="변이 관계 발생"/>
	<label commandName="TransitionalRelationshipSelectionId" devLabel="TransitionalRelationship" translation="변이 관계"/>
	<label commandName="TransitionalRelationshipSelectionPluralId" devLabel="TransitionalRelationships" translation="변이 관계"/>
	<label commandName="VCS_ADD_ASSEMBLYCONSTR_FAILED" devLabel="Failed to evaluate references to solve Tangent Relationship." translation="접선 관계를 해석하기 위한 참조를 평가하지 못했습니다."/>
	<label commandName="VCS_JOINT_DRAG_FAILURE" devLabel="drag failed" translation="끌기 실패"/>
	<label commandName="VCS_JOINT_DRAG_FAILUREINITERROR" devLabel="drag failed due to initialization error" translation="초기화 오류로 인해 끌기 실패"/>
	<label commandName="VCS_JOINT_DRAG_INCONSISTENT" devLabel="drag failed due to inconsistencies" translation="불일치로 인해 끌기에 실패"/>
	<label commandName="VCS_JOINT_DRIVE_FAILURE" devLabel="Joint drive failed unexpectedly" translation="접합 드라이브가 예기치 않게 실패함"/>
	<label commandName="VCS_JOINT_DRIVE_INCONSISTENT" devLabel="Joint drive failed due to inconsistencies" translation="불일치로 인해 접합 드라이브 실패"/>
	<label commandName="VCS_JOINT_FAILURE" devLabel="Position calculation failed due to initialization error" translation="초기화 오류로 인해 위치 계산에 실패"/>
	<label commandName="VCS_JOINT_INCONSISTENT" devLabel="Canât resolve some component positions because there are conflicts with assembly relationships in the design.&#xA;&#xA;Inspect existing assembly relationships." translation="디자인에서 조립품 관계와의 충돌이 있기 때문에 일부 구성요소 위치를 해석할 수 없습니다.&#xA;&#xA;기존 조립품 관계를 검사하십시오."/>
	<label commandName="VCS_SKETCH_OVER_CONSTRAINTS" devLabel="Sketch geometry is over constrained" translation="스케치 형상이 과도하게 구속됨"/>
	<label commandName="VCS_SKETCH_SOLVING_FAILED" devLabel="Failed to solve. Please try revising dimensions or constraints." translation="해석하지 못했습니다. 수정을 시도하십시오 치수 또는 구속조건이 있습니다."/>
	<label commandName="VisibilityStr" devLabel="Visibility" translation="가시성"/>
	<label commandName="WorkAxisFromCylinderRequestGenericError" devLabel="Work Axis From Cylinder failed due to invalid input" translation="잘못된 입력으로 인해 원통에서 작업축 작성에 실패했습니다."/>
	<label commandName="WorkAxisFromCylinderRequestInputFaceError" devLabel="Work Axis through Cylinder failed:  Face is not a cylinder or a cone" translation="원통을 통과하는 작업축 작성 실패: 면이 원통 또는 원추가 아닙니다."/>
	<label commandName="WorkAxisFromFaceAndPointRequestFaceNormalError" devLabel="Axis failed: cannot calculate face normal at selected point" translation="축 작성 실패: 선택한 점에서 면 법선을 계산할 수 없습니다."/>
	<label commandName="WorkAxisFromFaceAndPointRequestGenericError" devLabel="Axis failed: invalid input" translation="축 작성 실패: 잘못된 입력"/>
	<label commandName="WorkAxisFromFaceAndPointRequestPointProjectError" devLabel="Axis failed: no projection from point to face" translation="축 작성 실패: 점에서 면으로의 투영이 없습니다."/>
	<label commandName="WorkAxisFromLineRequestGenericError" devLabel="Work Axis From Edge failed.  Selected Edge must be linear" translation="모서리에서 작업축 작성이 실패했습니다. 선택한 모서리는 선형이어야 합니다."/>
	<label commandName="WorkAxisFromLocationAndVectorRequestGenericError" devLabel="Work Axis failed due to invalid input" translation="잘못된 입력으로 인해 작업축 작성 실패"/>
	<label commandName="WorkAxisFromMidPlaneInvalidInput" devLabel="Midplane Work Plane failed due to invalid input" translation="유효하지 않은 입력으로 인해 중간평면 작업 평면 실패"/>
	<label commandName="WorkAxisFromTwoPlanesRequestGenericError" devLabel="Offset Work Plane failed due to invalid input" translation="유효하지 않은 입력으로 인해 간격띄우기 작업 평면 실패"/>
	<label commandName="WorkAxisFromTwoPlanesRequestParallelPlanesError" devLabel="Work Axis From Two Planes failed: input planes do not intersect" translation="두 평면에서 작업축 작성 실패: 입력 평면이 교차하지 않습니다."/>
	<label commandName="WorkPlaneFromFaceAndPointRequestFaceNormalError" devLabel="Work Plane from Face and Point failed: Can't get normal of selected Face at the selected Point" translation="면 및 점에서 작업 평면 작성이 실패했습니다. 선택한 점에서 선택한 면의 법선을 가져올 수 없습니다."/>
	<label commandName="WorkPlaneFromFaceAndPointRequestGenericError" devLabel="Work Plane from Face and Point failed due to invalid input" translation="유효하지 않은 입력으로 인해 면 및 점에서 작업 평면 작성 실패"/>
	<label commandName="WorkPlaneFromFaceAndPointRequestPointProjectError" devLabel="Work Plane from Face and Point failed: No projection from Point to Face" translation="면 및 점에서 작업 평면 작성 실패: 점에서 면으로의 투영이 없습니다."/>
	<label commandName="WorkPlaneFromLineAndAngleRequestGenericError" devLabel="Work Plane At Angle failed due to invalid input" translation="유효하지 않은 입력으로 인해 각도에서 작업 평면 실패"/>
	<label commandName="WorkPlaneFromLocationAndVectorRequestGenericError" devLabel="Work Plane failed due to invalid input" translation="유효하지 않은 입력으로 인해 작업 평면 실패"/>
	<label commandName="WorkPlaneFromPointAndNormalRequestError" devLabel="Work Plane failed due to invalid input" translation="유효하지 않은 입력으로 인해 작업 평면 실패"/>
	<label commandName="WorkPlaneFromPointAndNormalRequestTargetError" devLabel="Work Plane failed due to invalid target" translation="잘못된 대상으로 인한 작업 평면 작성 실패"/>
	<label commandName="WorkPlaneFromThreePointsRequestColinearPointsError" devLabel="Work Plane through three points failed:  The points are collinear" translation="세 점을 통과하는 작업 평면 작성 실패: 점이 동일선상에 있습니다."/>
	<label commandName="WorkPlaneFromThreePointsRequestEqualPointsError" devLabel="Work Plane through three points failed:  Two or more of the points are identical" translation="세 점을 통과하는 작업 평면 실패: 2개 이상의 점이 동일합니다."/>
	<label commandName="WorkPlaneFromTwoLinesRequestColinearInputsError" devLabel="Work Plane From Two Lines failed: Input lines are collinear" translation="두 선에서 작업 평면 작성 실패: 입력 선이 동일선상에 있습니다."/>
	<label commandName="WorkPlaneFromTwoLinesRequestGenericError" devLabel="Work Plane From Two Lines failed due to invalid input" translation="유효하지 않은 입력으로 인해 두 선에서 작업 평면 실패"/>
	<label commandName="WorkPlaneFromTwoLinesRequestLinesNotParallelOrIntersectError" devLabel="Work Plane From Two Lines failed:  Input lines must intersect or be parallel" translation="두 선에서 작업 평면 작성 실패: 입력 선이 교차하거나 평행이어야 합니다."/>
	<label commandName="WorkPlaneFromTwoPlanesRequestCoplanarError" devLabel="Mid-Plane Work Plane failed:  Selected planes are coplanar" translation="중간평면 작업 평면 실패: 선택한 평면이 동일평면상에 있음"/>
	<label commandName="WorkPlaneInvalidInput" devLabel="Midplane Work Plane failed due to invalid input" translation="유효하지 않은 입력으로 인해 중간평면 작업 평면 실패"/>
	<label commandName="WorkPlaneOffsetFromPlaneRequestGenericError" devLabel="Offset Work Plane failed due to invalid input" translation="유효하지 않은 입력으로 인해 간격띄우기 작업 평면 실패"/>
	<label commandName="WorkPlanePerpendicularInvalidGeometry" devLabel="Perpendicular Work Plane failed: Invalid geometry" translation="수직 작업 평면 작성 실패: 형상이 유효하지 않습니다."/>
	<label commandName="WorkPlanePerpendicularNoInput" devLabel="Perpendicular Work Plane failed: No input geometry" translation="수직 작업 평면 작성 실패: 입력 형상이 없습니다."/>
	<label commandName="WorkPlanePerpendicularToFaceRequestFaceNormalError" devLabel="Perpendicular Work Plane failed: Can't get normal of selected Face at the selected Point" translation="수직 작업 평면 작성 실패: 선택한 점에서 선택한 면의 법선을 가져올 수 없습니다."/>
	<label commandName="WorkPlanePerpendicularToFaceRequestPointProjectError" devLabel="Perpendicular Work Plane failed: No projection from Point to Face" translation="수직 작업 평면 작성 실패: 점에서 면으로의 투영이 없습니다."/>
	<label commandName="WorkPlaneTangentToCylinderRequestGenericError" devLabel="Tangent Work Plane failed due to invalid input" translation="올바르지 않은 입력으로 인해 접하는 작업 평면 작성 실패"/>
	<label commandName="WorkPointFromCircleRequestFaceNotSphereError" devLabel="Work Point From Circular Edge failed:  Selected edge is not circular" translation="원형 모서리에서 작업점 작성 실패: 선택한 모서리가 원형이 아님"/>
	<label commandName="WorkPointFromLineAndPlaneRequestEdgeNotLinearError" devLabel="Work Point From Line and Plane failed:  Selected Edge is not linear" translation="선 및 평면으로 작업점 작성 실패: 선택한 모서리가 선형이 아님"/>
	<label commandName="WorkPointFromLineAndPlaneRequestFaceError" devLabel="Work Point From Line and Plane failed: Selected Face is not planar" translation="선 및 평면에서 작업점 작성 실패: 선택한 면이 평면형이 아닙니다."/>
	<label commandName="WorkPointFromLineAndPlaneRequestLineAndFaceParallelError" devLabel="Work Point From Line and Plane failed: Selected Face and Line are parallel" translation="선 및 평면으로 작업점 실패: 선택한 면 및 선이 평행함"/>
	<label commandName="WorkPointFromSphereRequestFaceNotSphereError" devLabel="Work Point From Sphere failed:  Selected face is not spherical" translation="구에서 작업점 실패: 선택한 면이 구형이 아님"/>
	<label commandName="WorkPointFromSphereRequestGenericError" devLabel="Cannot create point" translation="점을 작성할 수 없음"/>
	<label commandName="WorkPointFromThreePlanesRequestGenericError" devLabel="Work Point from 3 Planes failed due to invalid input" translation="유효하지 않은 입력으로 인해 세 평면에서 작업점 작성 실패"/>
	<label commandName="WorkPointFromThreePlanesRequestParallelPlanesError" devLabel="Work Point From Three Planes failed: input planes do not intersect" translation="세 평면에서 작업점 작성 실패: 입력 평면이 교차하지 않습니다."/>
	<label commandName="WorkPointFromTwoLinesRequestGenericError" devLabel="Work Point From Two Lines failed due to invalid input" translation="유효하지 않은 입력으로 인해 두 선에서 작업점 작성 실패"/>
	<label commandName="WorkPointFromTwoLinesRequestNoIntersectionError" devLabel="Work Point From Two Lines failed: lines do not intersect" translation="두 선에서 작업점 작성 실패: 선이 교차하지 않습니다."/>
	<label commandName="XRefDifferentVersionAlreadyExistsSameWillBeInserted" devLabel="The active document is already referencing a different version of the document %1%. The same version will be inserted again." translation="활성 문서가 문서 %1%의 다른 버전을 이미 참조하고 있습니다. 같은 버전이 다시 삽입됩니다."/>
	<label commandName="XRefDifferentVersionAlreadyExistsSameWillBeInserted_ccy" devLabel="This design already references %1%. The existing reference will be kept and nothing will be inserted." translation="이 디자인은 이미 %1%을(를) 참조합니다. 기존 참조가 유지되고 어떤 항목도 삽입되지 않습니다."/>
	<label commandName="XRefUpdateAbortedDueToMissingXRefs" devLabel="The operation failed because it results in some unresolved components. Please open following designs and fix the unresolved components:" translation="해석되지 않은 구성요소가 일부 생성되므로 작업에 실패했습니다. 다음 디자인을 열고 해석되지 않은 구성요소를 수정하십시오."/>
	<label commandName="alignComponentsInconsistent" devLabel="No alignment suggested by geometry could be found" translation="형상에서 제안한 정렬을 찾을 수 없습니다."/>
	<label commandName="comp1Name" devLabel="&lt;unknown&gt;" translation="&lt;알 수 없음&gt;"/>
	<label commandName="comp2Name" devLabel="&lt;unknown&gt;" translation="&lt;알 수 없음&gt;"/>
	<label commandName="insertDocfaile" devLabel="The document could not be downloaded." translation="문서를 다운로드할 수 없습니다."/>
	<label commandName="jointFailed" devLabel="%1% failed" translation="%1% 실패"/>
	<label commandName="jointFailedMsg1" devLabel="Another assembly relationship may affect a component’s position or one of the component’s geometry may have changed." translation="다른 조립품 관계가 구성요소의 위치에 영향을 줄 수 있거나 구성요소의 형상 중 하나가 변경되었을 수 있습니다."/>
	<label commandName="jointFailedMsg2" devLabel="Inspect existing assembly relationships, restore any geometry changes, or edit the feature and select new geometry." translation="기존 조립품 관계를 검사하거나, 형상 변경 사항을 복원하거나, 피쳐를 편집하고 새 형상을 선택하십시오."/>
	<label commandName="jointName" devLabel="&lt;unknown&gt;" translation="&lt;알 수 없음&gt;"/>
	<label commandName="jointType" devLabel="&lt;unknown&gt;" translation="&lt;알 수 없음&gt;"/>
	<label commandName="lclzXREFhasRelations" devLabel="Inserting a distributed design from one %1% to another is not currently supported.&#xA;&#xA;%2% of current design: %3%&#xA;%2% of design being inserted: %4%" translation="한 %1%의 분산된 설계를 다른 설계에 삽입하는 작업은 현재 지원되지 않습니다.&#xA;&#xA;현재 설계의 %2%: %3%&#xA;설계의 %2%이(가) 삽입되는 중: %4%"/>
	<label commandName="mateTimelineMultiCompTooltip" devLabel="%1% between %2% Components." translation="%2%개 구성요소 사이의 %1%."/>
	<label commandName="mateTwoCompTimelineTooltipSecond" devLabel="and %1%." translation="및 %1% 사이)."/>
	<label commandName="mateTwoCompTimelineTooltipfirst" devLabel="%1% between %2%" translation="%1%(%2%"/>
	<label commandName="project" devLabel="project" translation="프로젝트"/>
	<label commandName="solveContactSetInconsistent" devLabel="Contacts in new set cause a conflict" translation="새 세트의 접촉으로 인해 충돌이 발생합니다."/>
	<label commandName="solveNewJointInconsistent" devLabel="Selected joint type will result in conflict" translation="선택한 접합 유형으로 인해 충돌 발생"/>
</Resource>