<?xml version="1.0" encoding="UTF-8"?><Resource>
	<label commandName="AVKMeshBodySelectionCategory" devLabel="Volumetric Model Mesh Bodies" translation="체적 모형 메쉬 본체"/>
	<label commandName="BoundaryBodyAlreadyHasModel" devLabel="The specified boundary body already has a Volumetric Model." translation="지정된 경계 본체에 이미 체적 모형이 있습니다."/>
	<label commandName="BoundaryBodyNotFound" devLabel="The boundary body of this Volumetric Model was not found." translation="이 체적 모형의 경계 본체를 찾을 수 없습니다."/>
	<label commandName="ComputeSuspendedEditToUpdate" devLabel="Model to mesh feature set to not automatically recompute. Edit the feature to compute." translation="모형에서 메쉬로 피쳐가 자동으로 재계산되지 않도록 설정되었습니다. 계산할 피쳐를 편집합니다."/>
	<label commandName="ElementSizeOutOfRange" devLabel="Element size is out of range." translation="요소 크기가 범위를 벗어났습니다."/>
	<label commandName="FailedAddingClearances" devLabel="Failed to add clearances to Volumetric Model." translation="체적 모형에 틈새를 추가하지 못했습니다."/>
	<label commandName="FailedAddingOffsets" devLabel="Failed to add Offsets to Volumetric Model." translation="체적 모형에 간격띄우기를 추가하지 못했습니다."/>
	<label commandName="FailedToAddGradientDensity" devLabel="Failed to add Gradient Density to Volumetric Model." translation="그라데이션 밀도를 체적 모형에 추가하지 못했습니다."/>
	<label commandName="FailedToCreateLattice" devLabel="Failed to create the Lattice." translation="격자를 작성하지 못했습니다."/>
	<label commandName="FailedToCreateTexture" devLabel="Failed to create the Texture." translation="텍스처 생성에 실패했습니다."/>
	<label commandName="FailedToCreateVolFieldModel" devLabel="Failed to create the Volumetric Model." translation="체적 모형을 작성하지 못했습니다."/>
	<label commandName="FailedToReinitializeVolFieldModel" devLabel="Failed to reinitialize the Volumetric Model." translation="체적 모형을 다시 초기화하지 못했습니다."/>
	<label commandName="FeatureVolumetricCreateLattice" devLabel="Create Volumetric Lattice" translation="체적 격자 작성"/>
	<label commandName="FeatureVolumetricModelBase" devLabel="Volumetric Model Base Feature" translation="체적 모형 기준 피쳐"/>
	<label commandName="FeatureVolumetricModelCustom" devLabel="Custom Volumetric Model Feature" translation="사용자 체적 모형 피쳐"/>
	<label commandName="FeatureVolumetricModelToMesh" devLabel="Volumetric Model To Mesh" translation="체적 모형을 메쉬로"/>
	<label commandName="FeatureVolumetricModifyModel" devLabel="Modify Volumetric Lattice" translation="체적 격자 수정"/>
	<label commandName="FeatureVolumetricRemoveModel" devLabel="Remove Volumetric Model" translation="체적 모형 제거"/>
	<label commandName="FeatureVolumetricTexture" devLabel="Volumetric Texture" translation="체적 텍스처"/>
	<label commandName="GeneralRangeCheckError" devLabel="General Range Check Error." translation="일반 범위 확인 오류."/>
	<label commandName="LatticeDefaultUserName" devLabel="Volumetric Model" translation="체적 모형"/>
	<label commandName="MeshBodyParentMismatch" devLabel="The parent component of the mesh body does not match the parent component of the Volumetric Model." translation="메쉬 본체의 상위 구성요소가 체적 모형의 상위 구성요소와 일치하지 않습니다."/>
	<label commandName="SmallMeshRemovalMadeEmptyMesh" devLabel="Volumetric Model small mesh shell removal resulted in an empty mesh. Try reducing the threshold size." translation="체적 모형 작은 메쉬 쉘을 제거하여 빈 메쉬가 생성되었습니다. 임계값 크기를 줄여 보십시오."/>
	<label commandName="VF_ENVIRONMENT_NOT_SUPPORTED" devLabel="The environment does not support volumetric models." translation="The environment does not support volumetric models."/>
	<label commandName="VF_MODEL_BAD_BOUNDARY_BODY" devLabel="Inconsistency in the boundary body of the Volumetric Model." translation="체적 모형의 경계 본체에 불일치가 있습니다."/>
	<label commandName="VF_MODEL_BAD_COMPONENT" devLabel="Error in determining the component holding the Volumetric Model." translation="체적 모형을 포함하는 구성요소를 확인하는 중 오류가 발생했습니다."/>
	<label commandName="VF_MODEL_BAD_INTERNAL_STATE" devLabel="The Volumetric Model is in an invalid internal state." translation="체적 모형의 내부 상태가 잘못되었습니다."/>
	<label commandName="VF_MODEL_NO_ROOT_PARENT" devLabel="Failed to find the path to the root Volumetric Models." translation="루트 체적 모형에 대한 경로를 찾지 못했습니다."/>
	<label commandName="VF_MODEL_NO_SCENE_NODE" devLabel="The scene node for the Volumetric Model is not created. Toggling the visibility may solve this issue." translation="체적 모형에 대한 장면 노드가 작성되지 않았습니다. 가시성을 전환하면 이 문제가 해결될 수 있습니다."/>
	<label commandName="VolConfigBaseModelDensity" devLabel="Solidity (Uniform)" translation="견고성(균일)"/>
	<label commandName="VolConfigBaseModelScaleX" devLabel="Cell Size X Direction" translation="셀 크기 X 방향"/>
	<label commandName="VolConfigBaseModelScaleY" devLabel="Cell Size Y Direction" translation="셀 크기 Y 방향"/>
	<label commandName="VolConfigBaseModelScaleZ" devLabel="Cell Size Z Direction" translation="셀 크기 Z 방향"/>
	<label commandName="VolConfigCreateLatticeBaseModel" devLabel="Setup" translation="설정"/>
	<label commandName="VolConfigCreateLatticeDensityAlongCurve" devLabel="Solidity (Gradient Along Path)" translation="견고성(경로를 따라 그라데이션)"/>
	<label commandName="VolConfigCreateLatticeDensityOffsetHeading" devLabel="Selection Set " translation="선택 세트 "/>
	<label commandName="VolConfigCreateLatticeDensityOffsetTrailing" devLabel=" (Offset)" translation="(간격띄우기)"/>
	<label commandName="VolConfigDensityAlongCurvePositionEnd" devLabel="End Point Position" translation="끝점 위치"/>
	<label commandName="VolConfigDensityAlongCurvePositionStart" devLabel="Start Point Position" translation="시작점 위치"/>
	<label commandName="VolConfigDensityAlongCurveValueEnd" devLabel="End Point Solidity" translation="끝점 견고성"/>
	<label commandName="VolConfigDensityAlongCurveValueStart" devLabel="Start Point Solidity" translation="시작점 견고성"/>
	<label commandName="VolConfigDensityOffsetBaseOffset" devLabel="Thickness" translation="두께"/>
	<label commandName="VolConfigDensityOffsetBlendOffset" devLabel="Blend Distance" translation="거리 혼합"/>
	<label commandName="VolConfigDensityOffsetPeakDensity" devLabel="Solidity" translation="견고성"/>
	<label commandName="VolFieldBodySelectionCategory" devLabel="Volumetric Model Bodies" translation="체적 모형 본체"/>
	<label commandName="VolFieldFeatureSelectionId" devLabel="Volumetric Feature" translation="체적 피쳐"/>
	<label commandName="VolFieldFeatureSelectionsId" devLabel="Volumetric Features" translation="체적 피쳐"/>
	<label commandName="VolFieldModelBrowserEntry" devLabel="Volumetric Model" translation="체적 모형"/>
	<label commandName="VolFieldModelSelectionId" devLabel="Volumetric Model" translation="체적 모형"/>
	<label commandName="VolFieldModelToMeshPostfix" devLabel="Mesh" translation="메쉬"/>
	<label commandName="VolFieldModelsRootBrowserEntry" devLabel="Volumetric Models" translation="체적 모형"/>
	<label commandName="VolFieldModelsRootSelectionId" devLabel="Volumetric Models Root" translation="체적 모형 루트"/>
	<label commandName="VolFieldModelsRootSelectionsId" devLabel="Volumetric Models Root" translation="체적 모형 루트"/>
	<label commandName="VolFieldModelsSelectionId" devLabel="Volumetric Models" translation="체적 모형"/>
	<label commandName="VolFieldUnknownError" devLabel="Volumetric modeling operation failed." translation="체적 모델링 작업이 실패했습니다."/>
	<label commandName="VolMeshFailedToRemoveSmallMeshes" devLabel="Volumetric Model meshing failed to remove small mesh shells." translation="체적 모형 메쉬가 작은 메쉬 쉘을 제거하지 못했습니다."/>
	<label commandName="VolumetricModelConvertToMeshFailed" devLabel="Volumetric Model to mesh conversion failed." translation="체적 모형을 메쉬로 변환하지 못했습니다."/>
	<label commandName="VolumetricModelNotFound" devLabel="The Volumetric Model was not found." translation="체적 모형을 찾을 수 없습니다."/>
	<label commandName="VolumetricModelToMeshNotFound" devLabel="Volumetric Model to be meshed was not found." translation="메쉬할 체적 모형을 찾을 수 없습니다."/>
	<label commandName="VolumetricModelToMeshNotVald" devLabel="Volumetric Model to be meshed is not valid." translation="메쉬할 체적 모형이 유효하지 않습니다."/>
	<label commandName="VolumetricModifyLatticeDensityOffsetConfigSectionTitle" devLabel="Density Offset" translation="밀도 간격띄우기"/>
	<label commandName="VolumetricTextureBaseModelConfigSectionTitle" devLabel="Texture Setup" translation="텍스처 설정"/>
	<label commandName="VolumetricTextureClearancesConfigSectionTitle" devLabel="Clearances" translation="틈새"/>
	<label commandName="VolumetricTextureDepth" devLabel="Depth" translation="깊이"/>
	<label commandName="VolumetricTextureScaleX" devLabel="SizeX" translation="SizeX"/>
	<label commandName="VolumetricTextureScaleY" devLabel="SizeY" translation="SizeY"/>
	<label commandName="VolumetricTextureScaleZ" devLabel="SizeZ" translation="SizeZ"/>
</Resource>