<?xml version="1.0" encoding="utf-8"?><Resource>
	<label commandName=" BendIdColorInput" devLabel="Color" translation="색상"/>
	<label commandName="0.12in" devLabel="0.12in" translation="0.12인치"/>
	<label commandName="0.1in" devLabel="0.1in" translation="0.1인치"/>
	<label commandName="0.24in" devLabel="0.24in" translation="0.24인치"/>
	<label commandName="10.0mm" devLabel="10.0mm" translation="10.0mm"/>
	<label commandName="2.5mm" devLabel="2.5mm" translation="2.5mm"/>
	<label commandName="3.5mm" devLabel="3.5mm" translation="3.5mm"/>
	<label commandName="5.0mm" devLabel="5.0mm" translation="5.0mm"/>
	<label commandName="7.0mm" devLabel="7.0mm" translation="7.0mm"/>
	<label commandName="AASupport" devLabel="Autodesk Assistant" translation="Autodesk Assistant"/>
	<label commandName="ADFeedbacSurvayTitle" devLabel="Tell us about your experience with Automated Drawings" translation="자동 도면 사용 경험에 대해 알려 주십시오."/>
	<label commandName="ADFeedbackClickable" devLabel="Automated Drawings" translation="자동 도면"/>
	<label commandName="ADFeedbackPrefix" devLabel="Share your thoughts about" translation="다음에 대한 의견을 공유해 주십시오."/>
	<label commandName="ActivityFeed" devLabel="Comments" translation="주석"/>
	<label commandName="Add Sheet Restricted Message" devLabel="Use templates to standardize the creation of drawings so that you can save time and ensure consistency." translation="템플릿을 사용하여 시간을 절약하고 일관성을 유지할 수 있도록 도면 작성을 표준화합니다."/>
	<label commandName="Add Sheet Restricted Title" devLabel="Add Sheet" translation="시트 추가"/>
	<label commandName="AddAnotherAtt" devLabel="Place and Add Another" translation="배치 및 다른 항목 추가"/>
	<label commandName="AddBreak" devLabel="Add Break" translation="끊기 추가"/>
	<label commandName="AddImport" devLabel="                                                                   " translation="                                                                   "/>
	<label commandName="AddRevision" devLabel="Add Revision" translation="리비전 추가"/>
	<label commandName="AddSymbol" devLabel="Add" translation="추가"/>
	<label commandName="AddTitleBlock" devLabel="Add Title Block" translation="제목 블록 추가"/>
	<label commandName="AddTitleBlockFileDialogFilter" devLabel="AutoCAD drawing files" translation="AutoCAD 도면 파일"/>
	<label commandName="AlignedDimDirAndLengthSamePriorityAlgo" devLabel="Aligned Dimension Dir And Length Same Priority Algorithm" translation="정렬 치수 방향 및 길이 동일 우선순위 알고리즘"/>
	<label commandName="AlignedDimGenAlgo" devLabel="Aligned Dimension Generator Algorithm" translation="정렬 치수 생성기 알고리즘"/>
	<label commandName="AlignedDimSameLengthAndEndPointsWithSameXorYPriorityAlgo" devLabel="Aligned Dimension SameLength And EndPoints With Same XorY PriorityAlgo Algorithm" translation="XorY PriorityAlgo 알고리즘이 동일한 정렬 치수 동일 길이 및 끝점"/>
	<label commandName="AllAround" devLabel="All Around" translation="온둘레"/>
	<label commandName="AllDimensionColorButton" devLabel="Select Color" translation="색상 선택"/>
	<label commandName="AllDimensionColorInput" devLabel="Color" translation="색상"/>
	<label commandName="AllLevel" devLabel="All Level" translation="모든 단계"/>
	<label commandName="AllLevelTip" devLabel="Creates a parts list containing all components." translation="모든 구성요소를 포함하는 부품 리스트를 작성합니다."/>
	<label commandName="AllLevelTypeToolTip" devLabel="Swich to All Level partslist." translation="모든 단계 부품 리스트로 전환합니다."/>
	<label commandName="AllSheetsMulti" devLabel="All Sheets (Multi-File)" translation="모든 시트(다중 파일)"/>
	<label commandName="AllSheetsSingle" devLabel="All Sheets (Single File)" translation="모든 시트(단일 파일)"/>
	<label commandName="AngularDimEdgeLengthThreshold_ASME" devLabel="Angular dimension Edge length threshold" translation="각도 치수 모서리 길이 임계값"/>
	<label commandName="AngularDimEdgeLengthThreshold_ISO" devLabel="Angular dimension Edge length threshold" translation="각도 치수 모서리 길이 임계값"/>
	<label commandName="AngularDimGenAlgo" devLabel="Angular Dimension Generator Algorithm" translation="각도 치수 생성기 알고리즘"/>
	<label commandName="AnimationCreateStoryboardSheet" devLabel="Create Storyboard Sheet" translation="스토리보드 시트 작성"/>
	<label commandName="AnimationDefaultPartListLoc" devLabel="Default Parts List Loc" translation="기본 부품 리스트 위치"/>
	<label commandName="AnimationIncludePartList" devLabel="Include Parts List" translation="부품 리스트 포함"/>
	<label commandName="AnimationWithSingleISO" devLabel="Sheet with Single ISO View" translation="단일 ISO 뷰가 있는 시트"/>
	<label commandName="Animationroup" devLabel="Animation" translation="애니메이션"/>
	<label commandName="Annotation" devLabel="Annotation" translation="주석"/>
	<label commandName="AnnotationDesc" devLabel="Shows the Annotation Object Properties" translation="주석 객체 특성을 표시합니다."/>
	<label commandName="AnnotationToolTip" devLabel="Annotation" translation="주석"/>
	<label commandName="AppearanceGroup" devLabel="Appearance" translation="색상"/>
	<label commandName="Approved" devLabel="Approved" translation="승인됨"/>
	<label commandName="ApprovedBy" devLabel="Approved by" translation="승인자"/>
	<label commandName="ApprovedDate" devLabel="" translation=""/>
	<label commandName="ArchTick" devLabel=" Architectural Tick" translation=" 건축 눈금"/>
	<label commandName="Architectural" devLabel="Architectural" translation="건축"/>
	<label commandName="ArrowSideDesc" devLabel="Show arrow side properties" translation="화살표쪽 특성 표시"/>
	<label commandName="ArrowSideToolTip" devLabel="Arrow Side" translation="화살표쪽"/>
	<label commandName="AspectRatio" devLabel="Aspect Ratio" translation="종횡비"/>
	<label commandName="AssemblyReprensentation" devLabel="Assembly" translation="조립품"/>
	<label commandName="AssetReference" devLabel="Instance" translation="복제"/>
	<label commandName="AttCreatedBy" devLabel="Created By" translation="작성자"/>
	<label commandName="AttCreatedDate" devLabel="Created Date" translation="작성 날짜"/>
	<label commandName="AttCustom" devLabel="Custom" translation="사용자화"/>
	<label commandName="AttDrawingScale" devLabel="Drawing Scale" translation="도면 축척"/>
	<label commandName="AttDrawnBy" devLabel="Drawn By" translation="작성자"/>
	<label commandName="AttDrawnDate" devLabel="Drawn Date" translation="그려진 날짜"/>
	<label commandName="AttManageDrawingNumber" devLabel="Drawing Number" translation="도면 번호"/>
	<label commandName="AttManageLifecycle" devLabel="Lifecycle" translation="수명 주기"/>
	<label commandName="AttManageRevision" devLabel="Revision" translation="리비전"/>
	<label commandName="AttManageState" devLabel="State" translation="상태"/>
	<label commandName="AttModelDescription" devLabel="Description" translation="설명"/>
	<label commandName="AttModelItemNumber" devLabel="Model Item Number" translation="모형 항목 번호"/>
	<label commandName="AttModelLifecycle" devLabel="Model Lifecycle" translation="모형 수명 주기"/>
	<label commandName="AttModelMass" devLabel="Mass" translation="질량"/>
	<label commandName="AttModelMaterial" devLabel="Material" translation="재질"/>
	<label commandName="AttModelPartName" devLabel="Part Name" translation="부품 이름"/>
	<label commandName="AttModelPartNumber" devLabel="Part Number" translation="부품 번호"/>
	<label commandName="AttModelRevision" devLabel="Model Revision" translation="모형 리비전"/>
	<label commandName="AttModelState" devLabel="Model State" translation="모형 상태"/>
	<label commandName="AttModifiedDate" devLabel="Modified Date" translation="수정 날짜"/>
	<label commandName="AttPaperSize" devLabel="Paper Size" translation="용지 크기"/>
	<label commandName="AttProjectFolder" devLabel="Project Folder" translation="프로젝트 폴더"/>
	<label commandName="AttSheetNumber" devLabel="Sheet Number" translation="시트 번호"/>
	<label commandName="AttTitle1" devLabel="Title 1" translation="제목 1"/>
	<label commandName="Auto Dimension Restricted Message" devLabel="Add dimensions automatically so that you can make sure that your drawings are accurate and consistent." translation="도면의 정확성과 일관성을 보장할 수 있도록 치수를 자동으로 추가합니다."/>
	<label commandName="Auto Dimension Restricted Title" devLabel="Auto Dimension" translation="자동 치수"/>
	<label commandName="AutoArrange" devLabel="Auto Arrange" translation="자동 정렬"/>
	<label commandName="AutoArrangeDimensions" devLabel="Auto Arrange Dimensions:Main Assembly" translation="자동 치수 정렬:주 조립품"/>
	<label commandName="AutoArrangeDimensions_Component" devLabel="Auto Arrange Dimensions:Component" translation="자동 치수 정렬:구성요소"/>
	<label commandName="AutoArrangeDimensions_FlatPattern" devLabel="Auto Arrange Dimensions:Sheet Metal Flat Pattern" translation="자동 치수 정렬:판금 플랫 패턴"/>
	<label commandName="AutoArrangeDimensions_Folded" devLabel="Auto Arrange Dimensions:Sheet Metal Folded" translation="자동 치수 정렬:판금 접힌 패턴"/>
	<label commandName="AutoArrangeDimensions_SA" devLabel="Auto Arrange Dimensions:Sub Assembly" translation="자동 치수 정렬:부분조립품"/>
	<label commandName="AutoArrangeDimensions_TidyUp" devLabel="Auto Arrange Dimensions:Tidy Up" translation="자동 치수 정렬:정리"/>
	<label commandName="AutoArrangeGroup" devLabel="Auto Arrange Setings" translation="자동 정렬 설정"/>
	<label commandName="AutoBreakGroup" devLabel="Auto Break Setings" translation="자동 끊기 설정"/>
	<label commandName="AutoCenterLine" devLabel="Auto centerline" translation="자동 중심선"/>
	<label commandName="AutoCenterLineApplyTo" devLabel="Center Lines" translation="중심선"/>
	<label commandName="AutoCenterLineApplyToDesc" devLabel="Controls the hole types that receive automated center lines." translation="자동화된 중심선을 받는 홀 유형을 제어합니다."/>
	<label commandName="AutoCenterLineForHole" devLabel="Holes" translation="홀"/>
	<label commandName="AutoCenterLineForRoundCuts" devLabel="Round Cuts" translation="원형 절단"/>
	<label commandName="AutoCenterLineForRoundExtrude" devLabel="Round Extrude" translation="원형 돌출"/>
	<label commandName="AutoCenterLineGroup" devLabel="Auto Centerline Setings" translation="자동 중심선 설정"/>
	<label commandName="AutoCenterMark" devLabel="Auto centermark" translation="자동 중심 표식"/>
	<label commandName="AutoCenterMarkApplyTo" devLabel="Center Marks" translation="중심 표식"/>
	<label commandName="AutoCenterMarkApplyToDesc" devLabel="Controls the hole types that receive automated center marks." translation="자동화된 중심 표식을 받는 홀 유형을 제어합니다."/>
	<label commandName="AutoCenterMarkForFilet" devLabel="Fillet" translation="모깎기"/>
	<label commandName="AutoCenterMarkForHole" devLabel="Holes" translation="홀"/>
	<label commandName="AutoCenterMarkForRoundCuts" devLabel="Round Cuts" translation="원형 절단"/>
	<label commandName="AutoCenterMarkForRoundExtrude" devLabel="Round Extrude" translation="원형 돌출"/>
	<label commandName="AutoCenterMarkGroup" devLabel="Auto Centermark Setings" translation="자동 중심 표식 설정"/>
	<label commandName="AutoCenterMarkPattern" devLabel="Pattern" translation="패턴"/>
	<label commandName="AutoCmFilletMaxRadius" devLabel="Fillet Max Radius" translation="모깎기 최대 반지름"/>
	<label commandName="AutoCmFilletMinRadius" devLabel="Fillet Min Radius" translation="모깎기 최소 반지름"/>
	<label commandName="AutoCutGroup" devLabel="Auto Cut Setings" translation="자동 절단 설정"/>
	<label commandName="AutoDimRecipeDemoImage" devLabel="Recipe Example" translation="레시피 예"/>
	<label commandName="AutoDrawingGenerationGoup" devLabel="Automated Drawing Generation" translation="자동 도면 생성"/>
	<label commandName="AutoHoleNote" devLabel="Auto Hole Note" translation="자동 홀 주"/>
	<label commandName="AutoHoletGroup" devLabel="Auto Hole Note Setings" translation="자동 홀 주 설정"/>
	<label commandName="AutoNest" devLabel="Auto Nest" translation="자동 내포"/>
	<label commandName="AutoNestGroup" devLabel="Auto Nest Setings" translation="자동 내포 설정"/>
	<label commandName="AutoPrefCancelTxtForNewTemplate" devLabel="Save as New Drawing Template" translation="새 도면 템플릿으로 저장"/>
	<label commandName="AutoPrefCancelTxtForSelTemplate" devLabel="Update to selected template" translation="선택한 템플릿으로 업데이트"/>
	<label commandName="AutoPreferences" devLabel="Automation Preferences" translation="자동화 기본 설정"/>
	<label commandName="AutoPreferencesDesc" devLabel="Lets you review and control the Drawing Automation preferences." translation="도면 자동화 기본 설정을 검토하고 제어할 수 있습니다."/>
	<label commandName="AutoRotateForManualView" devLabel="Enable for Manual View" translation="수동 뷰에 사용"/>
	<label commandName="AutoRotateGroup" devLabel="Auto Rotate Setings" translation="자동 회전 설정"/>
	<label commandName="AutoScaleFitOption" devLabel="Fit Option" translation="맞춤 옵션"/>
	<label commandName="AutoScaleFitOption_MOVE_TO_BIGGER_SHEET" devLabel="Move To Bigger Sheet" translation="더 큰 시트로 이동"/>
	<label commandName="AutoScaleFitOption_NO_OP" devLabel="None" translation="없음"/>
	<label commandName="AutoScaleFitOption_SCALE_DOWN" devLabel="Scale Down" translation="축척 감소"/>
	<label commandName="AutoScaleGroup" devLabel="Auto Scale Setings" translation="자동 축척 설정"/>
	<label commandName="AutoSheetSizeGroup" devLabel="Auto Sheet Size Setings" translation="자동 시트 크기 설정"/>
	<label commandName="AutoViewGroup" devLabel="Auto View Setings" translation="자동 뷰 설정"/>
	<label commandName="AutocadDWG" devLabel="AutoCAD DWG" translation="AutoCAD DWG"/>
	<label commandName="AutocadDXF" devLabel="AutoCAD DXF" translation="AutoCAD DXF"/>
	<label commandName="Automatic" devLabel="Automatic" translation="자동"/>
	<label commandName="Automatic Creation of Drawing Restricted Message" devLabel="Automatically generate drawings from 3D models so that you can save time and reduce potential errors." translation="3D 모형에서 자동으로 도면을 생성하여 시간을 절약하고 잠재적 오류를 줄일 수 있습니다."/>
	<label commandName="Automatic Creation of Drawing Restricted Title" devLabel="Auto Creation of Drawing" translation="도면 자동 작성"/>
	<label commandName="AutomaticBendTipTable." devLabel="Creates a bend table for the selected sheet metal flat pattern reference." translation="선택한 판금 플랫 패턴 참조에 대한 절곡부 테이블을 작성합니다."/>
	<label commandName="AutomaticPartListTipTable." devLabel="Creates an empty table, parts list or bend table depending on the contents of the current sheet or selected reference." translation="현재 시트 또는 선택한 참조의 컨텐츠에 따라 빈 테이블, 부품 리스트 또는 절곡부 테이블을 작성합니다."/>
	<label commandName="AutomaticTip" devLabel="Creates a leader, hole and thread note or bend note depending on the selected edge." translation="선택한 모서리에 따라 지시선, 홀, 스레드 주 또는 절곡부 주를 작성합니다."/>
	<label commandName="AutomaticTipTable." devLabel="Creates an empty table, parts list or bend table depending on the contents of the current sheet or selected reference." translation="현재 시트 또는 선택한 참조의 컨텐츠에 따라 빈 테이블, 부품 리스트 또는 절곡부 테이블을 작성합니다."/>
	<label commandName="AutomationGroupStart" devLabel="Automation" translation="자동화"/>
	<label commandName="AutomationPreferencesButton" devLabel="Automation Preferences" translation="자동화 기본 설정"/>
	<label commandName="AutomationSettingsDesc" devLabel="Shows the Automation Settings" translation="자동화 설정을 표시합니다."/>
	<label commandName="AutomationSettingsPushedToTemplate" devLabel="Automation settings have successfully been updated in the template you selected " translation="선택한 템플릿에서 자동화 설정이 성공적으로 업데이트되었습니다."/>
	<label commandName="AutomationSettingsTip" devLabel="Automation Settings" translation="자동화 설정"/>
	<label commandName="AuxiliaryViewDialogTitle" devLabel="AUXILIARY VIEW" translation="보조 뷰"/>
	<label commandName="Back" devLabel="Back" translation="후면"/>
	<label commandName="Balloon" devLabel="Balloon" translation="품번기호"/>
	<label commandName="BalloonLevelInput" devLabel="Level" translation="단계"/>
	<label commandName="BalloonsColorButton" devLabel="Select Color" translation="색상 선택"/>
	<label commandName="BalloonsColorInput" devLabel="Color" translation="색상"/>
	<label commandName="BaselineRecipeTitle" devLabel="Baseline Dimensions" translation="기준선 치수"/>
	<label commandName="Behaviour" devLabel="Behaviour" translation="동작"/>
	<label commandName="Bend Note" devLabel="Bend Note" translation="절곡부 주"/>
	<label commandName="BendCenterColorButton" devLabel="Select Color" translation="색상 선택"/>
	<label commandName="BendCenterColorInput" devLabel="Color" translation="색상"/>
	<label commandName="BendExtents" devLabel="Bend Extents" translation="절곡부 범위"/>
	<label commandName="BendExtentsDesc" devLabel="Adds bend extents to help recognise full width bends." translation="전체 폭 절곡부를 인식할 수 있도록 절곡부 범위를 추가합니다."/>
	<label commandName="BendIdColorButton" devLabel="Select Color" translation="색상 선택"/>
	<label commandName="BendIdentifier" devLabel="Bend Identifier" translation="절곡부 식별자"/>
	<label commandName="BendNoteTip" devLabel="Creates a bend note for the selected bend centreline." translation="선택한 절곡부 중심선에 대한 절곡부 주를 작성합니다."/>
	<label commandName="BendNotesColorButton" devLabel="Select Color" translation="색상 선택"/>
	<label commandName="BendNotesColorInput" devLabel="Color" translation="색상"/>
	<label commandName="BendTableColorButton" devLabel="Select Color" translation="색상 선택"/>
	<label commandName="BendTableColorInput" devLabel="Color" translation="색상"/>
	<label commandName="BendTableTip" devLabel="Creates a bend table for the selected sheet metal flat pattern reference." translation="선택한 판금 플랫 패턴 참조에 대한 절곡부 테이블을 작성합니다."/>
	<label commandName="BestPerfo" devLabel="Best Performance" translation="최상의 성능"/>
	<label commandName="BestQuality" devLabel="Best Quality" translation="최고 품질"/>
	<label commandName="BlockEditAttributeGroup" devLabel="Attributes" translation="속성"/>
	<label commandName="BlockEditDesignInput" devLabel="Design" translation="디자인"/>
	<label commandName="BlockEditMassPrecisionInput" devLabel="Mass Precision" translation="질량 정밀도"/>
	<label commandName="BlockEditMassUnitInput" devLabel="Mass Units" translation="질량 단위"/>
	<label commandName="BlockEditReferenceGroup" devLabel="Reference" translation="참조"/>
	<label commandName="BlockEditSourceInput" devLabel="Source" translation="원본"/>
	<label commandName="BorderZoneInputTooltip" devLabel="Zones must be a positive even number" translation="영역은 양의 짝수여야 합니다."/>
	<label commandName="Bottom" devLabel="Bottom" translation="저면도"/>
	<label commandName="BottomLeft" devLabel="BottomLeft" translation="저면도 왼쪽"/>
	<label commandName="BottomRight" devLabel="BottomRight" translation="저면도 오른쪽"/>
	<label commandName="BoxBlank" devLabel=" Box" translation=" 상자"/>
	<label commandName="BoxFilled" devLabel=" Box Filled" translation=" 상자 채움"/>
	<label commandName="BreakDistance" devLabel="Break Distance" translation="거리 끊기"/>
	<label commandName="BreakDistance_ASME" devLabel="Break Distance" translation="거리 끊기"/>
	<label commandName="BreakDistance_ISO" devLabel="Break Distance" translation="거리 끊기"/>
	<label commandName="BreakHorizontal" devLabel="Horizontal" translation="수평"/>
	<label commandName="BreakInheritance" devLabel="Break Inheritance" translation="상속 끊기"/>
	<label commandName="BreakOrientation" devLabel="Orientation" translation="방향"/>
	<label commandName="BreakVertical" devLabel="Vertical" translation="수직"/>
	<label commandName="BreakWindow" devLabel="Break Window" translation="창 끊기"/>
	<label commandName="BreakWindowEnable" devLabel="Enable Window" translation="창 사용"/>
	<label commandName="BreakWindowParam" devLabel="Break Parameter" translation="매개변수 끊기"/>
	<label commandName="BreakoutSectionViewDialogTitle" devLabel="Breakout Section View" translation="브레이크 아웃 단면 뷰"/>
	<label commandName="BreakoutViewCmdSelectDrawingView" devLabel="View" translation="뷰"/>
	<label commandName="BreakoutViewHalfDepthTooltip" devLabel="Measures half of current model depth" translation="현재 모형 깊이의 절반 측정"/>
	<label commandName="BrokenViewCmdHorizontal" devLabel="Horizontal" translation="수평"/>
	<label commandName="BrokenViewCmdHorizontalTooltip" devLabel="Horizontal" translation="수평"/>
	<label commandName="BrokenViewCmdOrientation" devLabel="Orientation" translation="방향"/>
	<label commandName="BrokenViewCmdSelectDrawingView" devLabel="Drawing View" translation="도면 뷰"/>
	<label commandName="BrokenViewCmdSelectEndPoint" devLabel="End Point" translation="끝점"/>
	<label commandName="BrokenViewCmdSelectGap" devLabel="Gap" translation="간격"/>
	<label commandName="BrokenViewCmdSelectStartPoint" devLabel="Start Point" translation="시작점"/>
	<label commandName="BrokenViewCmdVertical" devLabel="Vertical" translation="수직"/>
	<label commandName="BrokenViewCmdVerticalTooltip" devLabel="Vertical" translation="수직"/>
	<label commandName="BrokenViewColorButton" devLabel="Select Color" translation="색상 선택"/>
	<label commandName="BrokenViewColorInput" devLabel="Color" translation="색상"/>
	<label commandName="Browser" devLabel="Browser" translation="브라우저"/>
	<label commandName="BulletOptions" devLabel=" " translation=" "/>
	<label commandName="Bullets" devLabel="Bullets" translation="글머리 기호"/>
	<label commandName="CENTER" devLabel="CENTER" translation="중심"/>
	<label commandName="CENTER2" devLabel="CENTER2" translation="중심2"/>
	<label commandName="CancelButton" devLabel="Cancel" translation="취소"/>
	<label commandName="CancelCreate3DPCBAndDrawing" devLabel="Cancel" translation="취소"/>
	<label commandName="CannotShowBreakoutOnMeshMessage" devLabel="&lt;b&gt;File contains mesh bodies which cannot show breakout sections.&lt;/b&gt;" translation="&lt;b&gt;파일에 브레이크 아웃 단면을 표시할 수 없는 메쉬 바디가 포함되어 있습니다.&lt;/b&gt;"/>
	<label commandName="CannotShowBreakoutOnMeshTooltip" devLabel="File contains mesh bodies which cannot show breakout sections" translation="파일에 브레이크 아웃 단면을 표시할 수 없는 메쉬 바디가 포함되어 있습니다."/>
	<label commandName="CellMapBasedLoopGeneratorAlgorithm" devLabel="Loop Generator Algorithm" translation="루프 생성기 알고리즘"/>
	<label commandName="CenterLinesMarksColorButton" devLabel="Select Color" translation="색상 선택"/>
	<label commandName="CenterLinesMarksColorInput" devLabel="Color" translation="색상"/>
	<label commandName="CenterMarkDimGenAlgo" devLabel="Center Mark Dim Genrator Algorithm" translation="중심 표식 치수 생성기 알고리즘"/>
	<label commandName="CenterPatternReferenceEdgeSelectionInput" devLabel="Reference Edge" translation="참조 모서리"/>
	<label commandName="CenterPatternSelectionInput" devLabel="Selection" translation="선택"/>
	<label commandName="CentermarkBaslineRecipeTitle" devLabel="CenterMark Baseline&#xA;Dimensions" translation="중심 표식 기준선&#xA;치수"/>
	<label commandName="CentermarkChainRecipeTitle" devLabel="CenterMark Chain&#xA;Dimensions" translation="중심 표식 체인&#xA;치수"/>
	<label commandName="ChainRecipeTitle" devLabel="Chain Dimensions" translation="체인 치수"/>
	<label commandName="ChamferDimGenAlgo" devLabel="Chamfer Dimension Generator Algorithm" translation="모따기 치수 생성기 알고리즘"/>
	<label commandName="ChamferDimPriorityAlgo" devLabel="Chamfer Dimension Priority Algorithm" translation="모따기 치수 우선순위 알고리즘"/>
	<label commandName="ChangesSynced" devLabel="&lt;b&gt;Changes to external references have been synced.&lt;/b&gt;" translation="&lt;b&gt;외부 참조에 대한 변경 사항이 동기화되었습니다.&lt;/b&gt;"/>
	<label commandName="ChatSupport" devLabel="Autodesk Assistant" translation="Autodesk Assistant"/>
	<label commandName="CheckBoxesToApplytTitleBlock" devLabel="Check Boxes to Apply Title Block" translation="제목 블록을 적용할 확인란"/>
	<label commandName="Checked" devLabel="Checked" translation="점검함"/>
	<label commandName="CheckedDate" devLabel="" translation=""/>
	<label commandName="ChooseAnother" devLabel="Choose another file" translation="다른 파일 선택"/>
	<label commandName="CircularDimGenAlgorithm" devLabel="Circular Dim Algorithm" translation="원형 치수 알고리즘"/>
	<label commandName="Closed" devLabel=" Closed" translation=" 닫힘"/>
	<label commandName="Closed Filled" devLabel=" Closed Filled" translation=" 닫고 채움"/>
	<label commandName="ClosedBlank" devLabel=" Closed Blank" translation=" 닫고 비움"/>
	<label commandName="CloudStoreMustBeLoggedIn" devLabel="You must be logged in to perform this action." translation="이 작업을 수행하려면 로그인해야 합니다."/>
	<label commandName="Code" devLabel="Code" translation="코드"/>
	<label commandName="ColorTitle" devLabel="Color Picker" translation="색상 선택기"/>
	<label commandName="ColumnDown" devLabel="Down" translation="아래로"/>
	<label commandName="ColumnUp" devLabel="Up" translation="위쪽"/>
	<label commandName="Columns" devLabel="Columns" translation="열"/>
	<label commandName="ColumnsTable" devLabel="Columns" translation="열"/>
	<label commandName="Commits" devLabel="Commits" translation="적용"/>
	<label commandName="CompISOWithOrthoViews" devLabel="Add ISO View with Ortho Views" translation="직교 뷰가 있는 ISO 뷰 추가"/>
	<label commandName="CompSheetCreate" devLabel="Create Component Sheet" translation="구성요소 시트 작성"/>
	<label commandName="CompWithOrthoViews" devLabel="Sheet With Orthogonal Views" translation="직교 뷰가 있는 시트"/>
	<label commandName="ComponentGroup" devLabel="Component" translation="구성요소"/>
	<label commandName="ComponentReprensentation" devLabel="Component" translation="구성요소"/>
	<label commandName="ConfigAspect" devLabel="Configured Aspect" translation="구성된 측면"/>
	<label commandName="ConfigColumnOrderTab" devLabel="Column Order" translation="열 순서"/>
	<label commandName="ConfigDropdownKey" devLabel="Configuration" translation="구성"/>
	<label commandName="ConfigPropertiesLabel" devLabel="Configuration Aspects" translation="구성 측면"/>
	<label commandName="ConfigTableColorButton" devLabel="Select Color" translation="색상 선택"/>
	<label commandName="ConfigTableColorInput" devLabel="Color" translation="색상"/>
	<label commandName="ConfigTableTab" devLabel="Table" translation="테이블"/>
	<label commandName="ConfigTableTip" devLabel="Creates a configuration table." translation="구성 테이블을 작성합니다."/>
	<label commandName="Continue" devLabel="Continue" translation="계속"/>
	<label commandName="Continue Editing" devLabel="Continue Editing" translation="편집 계속"/>
	<label commandName="ContinueCreate3DPCBAndDrawing" devLabel="Continue" translation="계속"/>
	<label commandName="Continuous" devLabel="Continuous" translation="연속"/>
	<label commandName="CopyTransformPtTooltip" devLabel="Point to Point" translation="점 대 점"/>
	<label commandName="Create3DPCBAndDrawing" devLabel="Create 3D PCB and Drawing" translation="3D PCB 및 도면 작성"/>
	<label commandName="Create3DPCBAndDrawingText" devLabel="Electronics Drawings require a 3D PCB to place model views. Fusion will create a 3D PCB before creating a drawing." translation="전자 제품 도면에서 모형 뷰를 배치하려면 3D PCB가 필요합니다. Fusion은 도면을 작성하기 전에 3D PCB를 작성합니다."/>
	<label commandName="CreateDrawingFromPreviousVersion" devLabel="Create Drawing from previous version instead?" translation="대신 이전 버전에서 도면을 작성하시겠습니까?"/>
	<label commandName="CreateDrawingFromPreviousVersion_ccy" devLabel="Create drawing from previous change instead?" translation="대신 이전 변경 사항에서 도면을 작성하시겠습니까?"/>
	<label commandName="CreateNewDrawingDocumentUnavailable" devLabel="Create Drawing (unavailable)" translation="도면 작성(사용할 수 없음)"/>
	<label commandName="CreateNewDrawingInput" devLabel="Create New" translation="새로 작성"/>
	<label commandName="CreateNewRef" devLabel="Create New" translation="새로 작성"/>
	<label commandName="CreateSheetFor" devLabel="Create sheets for " translation="시트 작성 대상 "/>
	<label commandName="CreatedBy" devLabel="Created by" translation="작성자"/>
	<label commandName="CreatedDate" devLabel="" translation=""/>
	<label commandName="CropViewCmdSelectDrawingView" devLabel="View" translation="뷰"/>
	<label commandName="CropViewOutlineColorButton" devLabel="Select Color" translation="색상 선택"/>
	<label commandName="CropViewOutlineColorInput" devLabel="Color" translation="색상"/>
	<label commandName="CurrentSheet" devLabel="Current Sheet" translation="현재 시트"/>
	<label commandName="Custom" devLabel="Custom" translation="사용자화"/>
	<label commandName="CustomTablesColorButton" devLabel="Select Color" translation="색상 선택"/>
	<label commandName="CustomTablesColorInput" devLabel="Color" translation="색상"/>
	<label commandName="CustomTag" devLabel="Custom" translation="사용자 설정"/>
	<label commandName="CutBody" devLabel="Body Participating In Cut" translation="절단에 포함되는 본체"/>
	<label commandName="CutComponent" devLabel="Component Participating In Cut" translation="절단에 포함되는 구성요소"/>
	<label commandName="CutInheritance" devLabel="Inherit Section" translation="단면 상속"/>
	<label commandName="DABottomLeft" devLabel="Bottom Left" translation="저면도 왼쪽"/>
	<label commandName="DABottomRight" devLabel="Bottom Right" translation="저면도 오른쪽"/>
	<label commandName="DADatumLocation" devLabel="Datum Location" translation="데이텀 위치"/>
	<label commandName="DADecreaseControl" devLabel="Decrease" translation="줄이기"/>
	<label commandName="DADecreaseControlToolTip" devLabel="Decreases density of dimensions." translation="치수의 밀도를 줄입니다."/>
	<label commandName="DADensityControl" devLabel="Density" translation="밀도"/>
	<label commandName="DADensityControlToolTip" devLabel="Controls density of dimensions." translation="치수의 밀도를 제어합니다."/>
	<label commandName="DADensityInactive" devLabel="The data is not available." translation="데이터를 사용할 수 없습니다."/>
	<label commandName="DADimensions" devLabel="dimensions" translation="치수"/>
	<label commandName="DAIncreaseControl" devLabel="Increase" translation="늘리기"/>
	<label commandName="DAIncreaseControlToolTip" devLabel="Increases density of dimensions." translation="치수의 밀도를 늘립니다."/>
	<label commandName="DAManual" devLabel="Manual" translation="수동"/>
	<label commandName="DAOriginLocation" devLabel="Origin Location" translation="원점위치"/>
	<label commandName="DASelectDatum" devLabel="Select Datum" translation="데이텀 선택"/>
	<label commandName="DATopLeft" devLabel="Top Left" translation="상단 왼쪽"/>
	<label commandName="DATopRight" devLabel="Top Right" translation="상단 오른쪽"/>
	<label commandName="DLBottomLeft" devLabel="Bottom-Left Corner" translation="하단 왼쪽 코너"/>
	<label commandName="DLBottomRight" devLabel="Bottom-Right Corner" translation="하단 오른쪽 코너"/>
	<label commandName="DLTopLeft" devLabel="Top-Left Corner" translation="상단 왼쪽 코너"/>
	<label commandName="DLTopRight" devLabel="Top-Right Corner" translation="상단 오른쪽 코너"/>
	<label commandName="DOBottomLeft" devLabel="Bottom-Left Corner" translation="하단 왼쪽 코너"/>
	<label commandName="DOBottomRight" devLabel="Bottom-Right Corner" translation="하단 오른쪽 코너"/>
	<label commandName="DOTopLeft" devLabel="Top-Left Corner" translation="상단 왼쪽 코너"/>
	<label commandName="DOTopRight" devLabel="Top-Right Corner" translation="상단 오른쪽 코너"/>
	<label commandName="DSAutomatic" devLabel="Automatic" translation="자동"/>
	<label commandName="DSAutomaticDesc" devLabel="Automatically selects the best dimension strategy." translation="최적의 치수 전략을 자동으로 선택합니다."/>
	<label commandName="DSBaseline" devLabel="Baseline" translation="기준선"/>
	<label commandName="DSBaselineDesc" devLabel="Adds multiple linear dimensions that measure distance from a datum point." translation="데이텀 점으로부터의 거리를 측정하는 여러 선형 치수를 추가합니다."/>
	<label commandName="DSChain" devLabel="Chain" translation="체인"/>
	<label commandName="DSChainDesc" devLabel="Adds a series of linear dimensions that measure distance from the end of the previous dimension." translation="이전 치수의 끝에서부터 거리를 측정하는 일련의 선형 치수를 추가합니다."/>
	<label commandName="DSOrdinate" devLabel="Ordinate" translation="세로좌표"/>
	<label commandName="DSOrdinateDesc" devLabel="Adds dimensions that are measured in the X or Y direction, relative to an origin point." translation="원점을 기준으로 X 또는 Y 방향으로 측정된 치수를 추가합니다."/>
	<label commandName="DSOverall" devLabel="Overall" translation="전체"/>
	<label commandName="DSOverallDesc" devLabel="Adds the overall dimensions of the object." translation="객체의 전체 치수를 추가합니다."/>
	<label commandName="DSSymmetric" devLabel="Symmetric" translation="대칭"/>
	<label commandName="DSSymmetricDesc" devLabel="Adds dimensions that symmetrically measure distances from the center line." translation="중심선으로부터의 거리를 대칭으로 측정하는 치수를 추가합니다."/>
	<label commandName="DSSymmetricWithBaseLine" devLabel="Symmetric With Baseline" translation="기준선 사용 대칭"/>
	<label commandName="DSSymmetricWithBaseLineDesc" devLabel="Adds dimensions with combined symmetric and baseline strategy." translation="결합된 대칭 및 기준선 전략으로 치수를 추가합니다."/>
	<label commandName="DSSymmetricWithOrdinate" devLabel="Symmetric With Ordinate" translation="세로좌표 사용 대칭"/>
	<label commandName="DSSymmetricWithOrdinateDesc" devLabel="Adds dimensions with combined symmetric and ordinate strategy." translation="결합된 대칭 및 세로좌표 전략으로 치수를 추가합니다."/>
	<label commandName="DWG File" devLabel="DWG File" translation="DWG 파일"/>
	<label commandName="DXFFilter2010" devLabel="AutoCAD 2010 Drawing (*.dxf)" translation="AutoCAD 2010 도면(*.dxf)"/>
	<label commandName="DXFFilter2013" devLabel="AutoCAD 2013 Drawing (*.dxf)" translation="AutoCAD 2013 도면(*.dxf)"/>
	<label commandName="DashboardCreateFusionDrawingCommand" devLabel="Dashboard Create Drawing" translation="대시보드 도면 작성"/>
	<label commandName="DateOfIssue" devLabel="Date of issue" translation="발행 날짜"/>
	<label commandName="DatumBlank" devLabel=" Datum Triangle" translation=" 데이텀 삼각형"/>
	<label commandName="DatumFilled" devLabel=" Datum Triangle Filled" translation=" 데이텀 삼각형 채움"/>
	<label commandName="Decimal" devLabel="Decimal" translation="마침표"/>
	<label commandName="DefaultSelectionInputText" devLabel="Select" translation="선택"/>
	<label commandName="DefaultSketchName" devLabel="Sketch Symbol" translation="스케치 기호"/>
	<label commandName="DefaultSketchSymbolName" devLabel="Sketch Symbol" translation="스케치 기호"/>
	<label commandName="DefaultSymbol" devLabel="Sketch Symbol" translation="스케치 기호"/>
	<label commandName="DefinedSize" devLabel="Defined Size" translation="정의된 크기"/>
	<label commandName="DeleteRevision" devLabel="Delete Revision" translation="리비전 삭제"/>
	<label commandName="DeleteSketchSymbol" devLabel="Delete" translation="삭제"/>
	<label commandName="DeleteStoryboardWarningTitle" devLabel="Missing/Deleted Storyboard Reference(s)" translation="스토리보드 참조 누락/삭제됨"/>
	<label commandName="DeleteStoryboardsWarningMsg" devLabel="&lt;p&gt;&lt;b&gt;Storyboard(s) that were referenced in the drawing are no longer able to be located.&lt;/b&gt;&lt;/p&gt;&lt;p&gt;Referenced Storyboard(s) either are not part of this configuration (if it is a configured design), or they have been deleted. As a result, views referencing these storyboards will be deleted.&lt;/p&gt;&lt;p&gt;&lt;/p&gt;" translation="&lt;p&gt;&lt;b&gt;도면에서 참조된 스토리보드를 더 이상 찾을 수 없습니다.&lt;/b&gt;&lt;/p&gt;&lt;p&gt;참조된 스토리보드는 이 구성의 일부가 아니거나(구성된 디자인인 경우) 또는 삭제되었습니다. 따라서 이러한 스토리보드를 참조하는 뷰가 삭제됩니다.&lt;/p&gt;&lt;p&gt;&lt;/p&gt;"/>
	<label commandName="DeleteTitleBlock" devLabel="Delete" translation="삭제"/>
	<label commandName="Depth" devLabel="Section Depth" translation="단면 깊이"/>
	<label commandName="DetailBoundariesColorButton" devLabel="Select Color" translation="색상 선택"/>
	<label commandName="DetailBoundariesColorInput" devLabel="Color" translation="색상"/>
	<label commandName="Detect and Omit Fasteners Restricted message" devLabel="Fasteners will be detected and omitted from the drawing." translation="조임쇠가 탐지되어 도면에서 생략됩니다."/>
	<label commandName="Detect and Omit Fasteners Restricted title" devLabel="Detect and Omit Fasteners" translation="조임쇠 감지 및 생략"/>
	<label commandName="DiffenentXYPriorityReducingAlgo" devLabel="Diffenent XY Priority Reducing Algorithm" translation="다른 XY 우선순위 감소 알고리즘"/>
	<label commandName="DimGapDesc" devLabel="Specify gap distance for extension lines." translation="치수보조선의 간격 거리를 지정합니다."/>
	<label commandName="DimGapValueInput" devLabel="Gap Distance" translation="간격 거리"/>
	<label commandName="DimGapValueTooltip" devLabel="Extension Line Gap Distance" translation="치수보조선 간격 거리"/>
	<label commandName="DimToDimDistance" devLabel="Dim to Dim Distance" translation="치수 간 거리"/>
	<label commandName="DimensionAlgos" devLabel="Disabled Dimension Algorithms" translation="치수 알고리즘 사용 안 함"/>
	<label commandName="DimensionEdgeGeneratorAlgorithm" devLabel="Edge Generator Algorithm" translation="모서리 생성기 알고리즘"/>
	<label commandName="DimensionGroup" devLabel="Dimension Settings" translation="치수 설정"/>
	<label commandName="DimensionPointGeneratorAlgorithm" devLabel="Point Generator Algorithm" translation="점 생성기 알고리즘"/>
	<label commandName="DimensionPriorityModifierByStrategyAlgo" devLabel="Dimension Priority Modifier By Strategy" translation="전략별 치수 우선순위 수정자"/>
	<label commandName="DimensionRange" devLabel="Dimension Range (0-100)" translation="치수 범위(0-100)"/>
	<label commandName="DimensionRegionBasedFilterAlgorithm" devLabel="Dimension Region Based Filter Algorithm" translation="치수 영역 기반 필터 알고리즘"/>
	<label commandName="Direction" devLabel="Direction" translation="방향"/>
	<label commandName="Direction_NoSymbol" devLabel="No values" translation="값 없음"/>
	<label commandName="Direction_Side" devLabel="Horizontal Direction" translation="수평 방향"/>
	<label commandName="Direction_Top" devLabel="Vertical direction" translation="수직 방향"/>
	<label commandName="Direction_Undefined" devLabel="Direction undefined" translation="방향이 정의되지 않음"/>
	<label commandName="DisassociatedAnnotations" devLabel="Disassociated annotations" translation="연관해제된 주석"/>
	<label commandName="Display in table" devLabel="Display in table" translation="테이블에 표시"/>
	<label commandName="Distance" devLabel="Distance" translation="거리"/>
	<label commandName="Distribute" devLabel="Distribute" translation="분산"/>
	<label commandName="DocumentSettingsDesc" devLabel="Shows the Document Settings" translation="문서 설정 표시"/>
	<label commandName="DocumentSettingsToolTip" devLabel="Document Settings" translation="문서 설정"/>
	<label commandName="DocumentStatus" devLabel="Document status" translation="문서 상태"/>
	<label commandName="DocumentType" devLabel="Document type" translation="문서 유형"/>
	<label commandName="Documentation Environment" devLabel="Drawing" translation="도면"/>
	<label commandName="DoneManageSymbols" devLabel="Done" translation="종료"/>
	<label commandName="DonnotShowMeAgainCheckBoxCaption" devLabel="Don't show me this again." translation="이 메시지를 다시 표시 안 함"/>
	<label commandName="Dot" devLabel=" Dot" translation=" 점"/>
	<label commandName="DotBlank" devLabel=" Dot Blank" translation=" 빈 점"/>
	<label commandName="DotSmall" devLabel=" Dot Small" translation=" 작은 점"/>
	<label commandName="DrawingAlignedDimTypeInput" devLabel="Aligned" translation="정렬"/>
	<label commandName="DrawingAutomationPreferenceCmdD" devLabel="Automation Preferences" translation="자동화 기본 설정"/>
	<label commandName="DrawingChangeAwarenessComponentsSelInput" devLabel="Components" translation="구성요소"/>
	<label commandName="DrawingDebug" devLabel="Drawing Debug" translation="도면 디버그"/>
	<label commandName="DrawingDebugCommandDesc" devLabel="Show some useful information for debugging or testing" translation="디버그 또는 테스트를 위한 몇 가지 유용한 정보 표시"/>
	<label commandName="DrawingDiameterDimTypeInput" devLabel="Diameter" translation="지름"/>
	<label commandName="DrawingDimensionArrangeCmdAlign" devLabel="Align" translation="정렬"/>
	<label commandName="DrawingDimensionArrangeCmdAlignTooltip" devLabel="Align" translation="정렬"/>
	<label commandName="DrawingDimensionArrangeCmdArrangementType" devLabel="Type" translation="유형"/>
	<label commandName="DrawingDimensionArrangeCmdSelctSpacing" devLabel="Spacing" translation="간격"/>
	<label commandName="DrawingDimensionArrangeCmdSelectBaseDimension" devLabel="Base dimension" translation="기준 치수"/>
	<label commandName="DrawingDimensionArrangeCmdSelectDimensionsToMove" devLabel="Dimensions to move" translation="이동할 치수"/>
	<label commandName="DrawingDimensionArrangeCmdStackTooltip" devLabel="Stack" translation="스택"/>
	<label commandName="DrawingDimensionCmdStack" devLabel="Stack" translation="스택"/>
	<label commandName="DrawingExportwoRefresh" devLabel="Export" translation="내보내기"/>
	<label commandName="DrawingFormat" devLabel="Format" translation="형식"/>
	<label commandName="DrawingHorizontalLinearDimTypeInput" devLabel="Horizontal" translation="수평"/>
	<label commandName="DrawingInsertConfigCancel" devLabel="Cancel" translation="취소"/>
	<label commandName="DrawingInsertConfigDialog" devLabel="Select Configuration" translation="구성 선택"/>
	<label commandName="DrawingInsertConfigOK" devLabel="OK" translation="확인"/>
	<label commandName="DrawingOpenDocumentFail_OtherReasons" devLabel="Can't open this file. The file is corrupt or contains migration issues. &#xA;Please send the file to Autodesk Support for assistance." translation="이 파일을 열 수 없습니다. 파일이 손상되었거나 마이그레이션 문제가 있습니다. &#xA;지원을 받으려면 Autodesk 지원 팀으로 파일을 보내십시오."/>
	<label commandName="DrawingOptionTooltip" devLabel="&lt;b&gt;Drawing&lt;/b&gt;&lt;br&gt;&lt;br&gt;Switches the configuration for all views of selected configuration on all sheets in the drawing." translation="&lt;b&gt;도면&lt;/b&gt;&lt;br&gt;&lt;br&gt;도면의 모든 시트에서 선택한 구성의 모든 뷰에 대한 구성을 전환합니다."/>
	<label commandName="DrawingOsnapCenterInput" devLabel="Center" translation="중심"/>
	<label commandName="DrawingOsnapCurveXYMinMax" devLabel="Curve X/Y Min/Max" translation="곡선 X/Y 최소/최대"/>
	<label commandName="DrawingOsnapEndpointInput" devLabel="Endpoint" translation="끝점"/>
	<label commandName="DrawingOsnapIntersectionInput" devLabel="Intersection" translation="교차점"/>
	<label commandName="DrawingOsnapMidpointInput" devLabel="Midpoint" translation="중간점"/>
	<label commandName="DrawingOsnapNoneInput" devLabel="None" translation="없음"/>
	<label commandName="DrawingOsnapPointInput" devLabel="Point" translation="점"/>
	<label commandName="DrawingOsnapQuadrantInput" devLabel="Quadrant" translation="사분점"/>
	<label commandName="DrawingOsnapTangentInput" devLabel="Tangent" translation="접선"/>
	<label commandName="DrawingPrintDialog_NumOfCopiesLable" devLabel="Number of Copies" translation="인쇄 매수"/>
	<label commandName="DrawingPrintDialog_Offset_X" devLabel="X" translation="X"/>
	<label commandName="DrawingPrintDialog_Offset_Y" devLabel="Y" translation="Y"/>
	<label commandName="DrawingPrintDialog_Orientation" devLabel="Orientation" translation="방향"/>
	<label commandName="DrawingPrintDialog_PaperSizes" devLabel="Paper Size" translation="용지 크기"/>
	<label commandName="DrawingPrintDialog_PrintLineWidthsLabel" devLabel="Print Line Widths" translation="인쇄 선 폭"/>
	<label commandName="DrawingPrintDialog_PrintToFolder" devLabel="Print to Folder" translation="폴더로 인쇄"/>
	<label commandName="DrawingPrintDialog_Range" devLabel="Define Range" translation="범위 정의"/>
	<label commandName="DrawingPrintDialog_ShowPreviewCheck" devLabel="Print Preview" translation="인쇄 미리보기"/>
	<label commandName="DrawingPrintRefresh" devLabel="Refresh" translation="갱신"/>
	<label commandName="DrawingPrintwoRefresh" devLabel="Print" translation="인쇄"/>
	<label commandName="DrawingRadiusDimTypeInput" devLabel="Radius" translation="반지름"/>
	<label commandName="DrawingSheetCreateNew" devLabel="Create new sheet" translation="새 시트 작성"/>
	<label commandName="DrawingSheetInput" devLabel="Sheet" translation="시트"/>
	<label commandName="DrawingSheets" devLabel="Sheets" translation="시트"/>
	<label commandName="DrawingShowChangeAwarenessCmdToolbar" devLabel="Change Summary" translation="변경 요약"/>
	<label commandName="DrawingShowChangeAwarenessCommandQAT" devLabel="User Change Awareness" translation="사용자 변경 인식"/>
	<label commandName="DrawingSwitchConfigDrawing" devLabel="Drawing" translation="도면"/>
	<label commandName="DrawingSwitchConfigScope" devLabel="Scope" translation="범위"/>
	<label commandName="DrawingSwitchConfigViewSet" devLabel="View Set" translation="뷰 세트"/>
	<label commandName="DrawingTemplateFileName" devLabel="Template" translation="템플릿"/>
	<label commandName="DrawingTemplateSaveAsFileFilters" devLabel="Drawing (*.f2d);;Drawing Template (*.f2t)" translation="도면(*.f2d);;도면 템플릿(*.f2t)"/>
	<label commandName="DrawingVerticalLinearDimTypeInput" devLabel="Vertical" translation="수직"/>
	<label commandName="DrawingsDocTitle" devLabel="Drawing" translation="도면"/>
	<label commandName="DrawingsPropertyRefreshCmd" devLabel="Refresh Properties" translation="특성 새로 고침"/>
	<label commandName="Drawn" devLabel="Drawn" translation="작성됨"/>
	<label commandName="DrawnDate" devLabel="" translation=""/>
	<label commandName="DuplicateSketchSymbol" devLabel="Duplicate" translation="복제"/>
	<label commandName="DwgNo" devLabel="DWG No." translation="도면 번호"/>
	<label commandName="ECADLayerStackDiagramCmdDialogTitle" devLabel="Layer Stack View" translation="도면층 스택 뷰"/>
	<label commandName="ECADLayerStackViewCmd" devLabel="Layer Stack View" translation="도면층 스택 뷰"/>
	<label commandName="ECADNewDrawingDocumentToolTip" devLabel="Creates a drawing of electronics design. &#xA;&#xA;Place a view of the PCB. Place a diagram and table for the PCB layer stack." translation="전자 제품 디자인의 도면을 작성합니다. &#xA;&#xA;PCB의 뷰를 배치합니다. PCB 도면층 스택에 대한 다이어그램 및 테이블을 배치합니다."/>
	<label commandName="ECADNewDrawingDocumentUnavailableToolTip" devLabel="Unavailable when there is no PCB linked to electronics design.&#xA;&#xA;Creates a drawing of electronics design. Place a view of the PCB. Place a diagram and table for the PCB layer stack." translation="전자 제품 디자인에 링크된 PCB가 없는 경우 사용할 수 없습니다.&#xA;&#xA;전자 제품 디자인의 도면을 작성합니다. PCB의 뷰를 배치합니다. PCB 도면층 스택에 대한 다이어그램 및 테이블을 배치합니다."/>
	<label commandName="ECADNewDrawingFromPCB3d" devLabel="From Design" translation="디자인에서"/>
	<label commandName="EDIT_DISPLAY_OPTIONS_GROUP" devLabel="Options" translation="옵션"/>
	<label commandName="EDIT_PROPERTIES_GROUP" devLabel="Properties" translation="특성"/>
	<label commandName="EDIT_TOGGLE_BORDER_CMD" devLabel="Show Border" translation="경계 표시"/>
	<label commandName="EDIT_TOGGLE_GRID_CMD" devLabel="Show Layout Grid" translation="배치 그리드 표시"/>
	<label commandName="EDIT_TOGGLE_OTHERGEOMETRY_CMD" devLabel="Show Sheet Contents" translation="시트 컨텐츠 표시"/>
	<label commandName="EDIT_TOGGLE_SHEET_CMD" devLabel="Show Sheet" translation="시트 표시"/>
	<label commandName="EDIT_TOGGLE_SNAP_CMD" devLabel="Snap to Grid" translation="그리드로 스냅"/>
	<label commandName="EDIT_TOOL_OPTIONS_GROUP" devLabel="Options" translation="옵션"/>
	<label commandName="EdgeDimGenAlgo" devLabel="Edge Dim Generator Algorithm" translation="모서리 치수 생성기 알고리즘"/>
	<label commandName="EdgeExtensionColorButton" devLabel="Select Color" translation="색상 선택"/>
	<label commandName="EdgeExtensionColorInput" devLabel="Color" translation="색상"/>
	<label commandName="EdgeMajoritySymbolInput" devLabel="Edge" translation="모서리"/>
	<label commandName="EdgeReset" devLabel="Reset" translation="재설정"/>
	<label commandName="EdgeResetDesc" devLabel="Reset all properties to default values" translation="모든 특성을 기본값으로 재설정"/>
	<label commandName="EdgeVisibilityGroup" devLabel="Edge Visibility" translation="모서리 가시성"/>
	<label commandName="EditPalette" devLabel="Edit Palette" translation="팔레트 편집"/>
	<label commandName="EditPaletteColor" devLabel="Edit Palette Color" translation="팔레트 색상 편집"/>
	<label commandName="EditPaletteLinetype" devLabel="Edit Palette Linetype" translation="팔레트 선종류 편집"/>
	<label commandName="EditPaletteLineweight" devLabel="Edit Palette Lineweight" translation="팔레트 선가중치 편집"/>
	<label commandName="EditSketchSymbol" devLabel="Edit" translation="편집"/>
	<label commandName="EditToolPropertySetCustom" devLabel="Custom" translation="사용자화"/>
	<label commandName="EditToolPropertySetDynamic" devLabel="Dynamic" translation="동적"/>
	<label commandName="EditToolPropertySetVaries" devLabel="*VARIES*" translation="*다양함*"/>
	<label commandName="EditToolProps" devLabel="Edit Tool" translation="편집 도구"/>
	<label commandName="ElectronicsTableCommandDialogTitle" devLabel="Insert Layer Stack Table" translation="도면층 스택 테이블 삽입"/>
	<label commandName="ElectronicsTableNewDescription1" devLabel="Layer Stack Table is not available when there is no linked Electronics Design." translation="링크된 전자 제품 디자인이 없으면 도면층 스택 테이블을 사용할 수 없습니다."/>
	<label commandName="ElectronicsTableNewDescription2" devLabel="To use electronics data in a drawing, first link the 3D PCB to an Electronics Design, then create a drawing." translation="도면에서 전자 제품 데이터를 사용하려면 먼저 3D PCB를 전자 제품 디자인에 링크한 다음, 도면을 작성합니다."/>
	<label commandName="ElectronicsTableSuffix" devLabel=" (unavailable)" translation=" (사용할 수 없음)"/>
	<label commandName="EmptyLeaderTip" devLabel="Creates a leader regardless of any feature data stored within the selected edge." translation="선택한 모서리 내에 저장된 피쳐 데이터에 관계없이 지시선을 작성합니다."/>
	<label commandName="EmptyTableTip" devLabel="Creates an empty table." translation="빈 테이블을 작성합니다."/>
	<label commandName="EnableBrokenView" devLabel="Enable" translation="사용"/>
	<label commandName="EnableInterviewDatums" devLabel="Enable Interview datums" translation="인터뷰 데이텀 사용"/>
	<label commandName="Engineering" devLabel="Engineering" translation="엔지니어링"/>
	<label commandName="EraseSelectionInput" devLabel="Selection" translation="선택"/>
	<label commandName="ExistingDimGeneratorAlgorithm" devLabel="Existing Dimension Generator Algorithm" translation="기존 치수 생성기 알고리즘"/>
	<label commandName="Export CSV Restricted Message" devLabel="Export to CSV and other file types so that you can easily share and collaborate on your designs." translation="CSV 및 기타 파일 형식으로 내보내어 디자인을 쉽게 공유하고 협업할 수 있습니다."/>
	<label commandName="Export CSV Restricted Title" devLabel="Export CSV" translation="CSV 내보내기"/>
	<label commandName="Export DWG Restricted Message" devLabel="Export to DWG and other file types so that you can easily share and collaborate on your designs." translation="DWG 및 기타 파일 형식으로 내보내어 디자인을 쉽게 공유하고 공동으로 작업할 수 있습니다."/>
	<label commandName="Export DWG Restricted Title" devLabel="Export DWG" translation="DWG 내보내기"/>
	<label commandName="Export DXF Restricted Message" devLabel="Export to DXF and other file types so that you can easily share and collaborate on your designs." translation="DXF 및 기타 파일 형식으로 내보내어 디자인을 쉽게 공유하고 공동으로 작업할 수 있습니다."/>
	<label commandName="Export DXF Restricted Title" devLabel="Export DXF" translation="DXF 내보내기"/>
	<label commandName="Export PDF Restricted Message" devLabel="Export to PDF and other file types so that you can easily share and collaborate on your designs." translation="PDF 및 기타 파일 형식으로 내보내어 디자인을 쉽게 공유하고 공동으로 작업할 수 있습니다."/>
	<label commandName="Export PDF Restricted Title" devLabel="Export PDF" translation="PDF 내보내기"/>
	<label commandName="ExportCmdFileExistAndIsNotWritable" devLabel="The file cannot be replaced because it is in use." translation="파일이 사용 중이므로 대체할 수 없습니다."/>
	<label commandName="ExportPDFFilter" devLabel="PDF Files (*.pdf)" translation="PDF 파일(*.pdf)"/>
	<label commandName="ExportPartsListFilter" devLabel="CSV file(*.csv)" translation="CSV 파일(*.csv)"/>
	<label commandName="Extent" devLabel="Extent Type" translation="범위 유형"/>
	<label commandName="ExternalFilePath" devLabel="File Path" translation="파일 경로"/>
	<label commandName="FCFReset" devLabel="Reset" translation="재설정"/>
	<label commandName="FCFResetDesc" devLabel="Reset all properties to default values" translation="모든 특성을 기본값으로 재설정"/>
	<label commandName="FDWGGcCoincidentCommandDesc" devLabel="Coincident" translation="일치"/>
	<label commandName="FDWGGcCollinearCommandDesc" devLabel="Collinear" translation="동일선상"/>
	<label commandName="FDWGGcConcentricCommandDesc" devLabel="Concentric" translation="동심"/>
	<label commandName="FDWGGcEqualCommandDesc" devLabel="Equal" translation="동일"/>
	<label commandName="FDWGGcFixCommandDesc" devLabel="Fix" translation="고정"/>
	<label commandName="FDWGGcHorizontalCommandDesc" devLabel="Horizontal" translation="수평"/>
	<label commandName="FDWGGcHorizontalVerticalCommandDesc" devLabel="Horizontal/Vertical" translation="수평/수직"/>
	<label commandName="FDWGGcParallelCommandDesc" devLabel="Parallel" translation="평행"/>
	<label commandName="FDWGGcPerpendicularCommandDesc" devLabel="Perpendicular" translation="직각"/>
	<label commandName="FDWGGcSmoothCommandDesc" devLabel="Smooth" translation="부드럽게"/>
	<label commandName="FDWGGcSymmetricCommandDesc" devLabel="Symmetric" translation="대칭"/>
	<label commandName="FDWGGcTangentCommandDesc" devLabel="Tangent" translation="접선"/>
	<label commandName="FDWGGcVerticalCommandDesc" devLabel="Vertical" translation="수직"/>
	<label commandName="FDWGSketchSmartConstarintDimCommand" devLabel="Sketch Dimension" translation="스케치 치수"/>
	<label commandName="FD_APPROVED_BY" devLabel="Approved by" translation="승인자"/>
	<label commandName="FD_APPROVED_DATE" devLabel="Date Approved" translation="승인된 날짜"/>
	<label commandName="FD_CHECKED_BY" devLabel="Checked by" translation="점검자"/>
	<label commandName="FD_CHECKED_DATE" devLabel="Date checked" translation="점검 날짜"/>
	<label commandName="FD_CODE" devLabel="Code compliance" translation="법규 준수"/>
	<label commandName="FD_CREATED_DATE" devLabel="Date created" translation="작성 날짜"/>
	<label commandName="FD_CREATE_BY" devLabel="Created by" translation="작성자"/>
	<label commandName="FD_DATE_OF_ISSUE" devLabel="Date of issue" translation="발행 날짜"/>
	<label commandName="FD_DEPT" devLabel="Department" translation="부서"/>
	<label commandName="FD_DOCUMENT_STATUS" devLabel="Document Status" translation="문서 상태"/>
	<label commandName="FD_DOCUMENT_TYPE" devLabel="Document Type" translation="문서 유형"/>
	<label commandName="FD_DRAWING_NUMBER" devLabel="Drawing number" translation="도면 번호"/>
	<label commandName="FD_DRAWN_BY" devLabel="Drawn by" translation="작성자"/>
	<label commandName="FD_DRAWN_DATE" devLabel="Date drawn" translation="작성 날짜"/>
	<label commandName="FD_DWG_NO" devLabel="Drawing number" translation="도면 번호"/>
	<label commandName="FD_PROJECT" devLabel="Project name" translation="프로젝트 이름"/>
	<label commandName="FD_REV" devLabel="Revision number" translation="리비전 번호"/>
	<label commandName="FD_SCALE" devLabel="Drawing scale" translation="도면 축척"/>
	<label commandName="FD_SHEET" devLabel="Sheet number" translation="시트 번호"/>
	<label commandName="FD_SIZE" devLabel="Paper size" translation="용지 크기"/>
	<label commandName="FD_TECHNICAL_REFERENCE" devLabel="Technical reference" translation="기술적 참조"/>
	<label commandName="FD_TITLE_1" devLabel="Title one" translation="제목 1"/>
	<label commandName="FD_TITLE_2" devLabel="Title two" translation="제목 2"/>
	<label commandName="FD_TITLE_3" devLabel="Title three" translation="제목 3"/>
	<label commandName="FD_WEIGHT" devLabel="Weight" translation="가중치"/>
	<label commandName="FETCHLATESTPROP" devLabel="Fetching latest properties... " translation="최신 특성을 가져오는 중... "/>
	<label commandName="FUSIONDOCBALLOONNOVIEWMSG" devLabel="This sheet has no drawing views. To add balloons, first add a base view." translation="이 시트에는 도면 뷰가 없습니다. 품번기호를 추가하려면 먼저 기준 뷰를 추가하십시오."/>
	<label commandName="FUSIONDOCBALLOONNOVIEWTOOLTIP" devLabel="This sheet has no drawing views." translation="이 시트에는 도면 뷰가 없습니다."/>
	<label commandName="FUSIONDOCNOBALLOONORBENDIDTOOLTIP" devLabel="This sheet has no balloons or bend identifiers." translation="이 시트에는 품번기호 또는 절곡부 식별자가 없습니다."/>
	<label commandName="FUSIONDOCNOBALLOONTOOLTIP" devLabel="This sheet has no balloons." translation="이 시트에는 품번기호가 없습니다."/>
	<label commandName="FUSIONDOCPRINTERROR" devLabel=" did not print due to an unknown error." translation=" 알 수 없는 오류 때문에 인쇄되지 않았습니다."/>
	<label commandName="FUSIONDOCPRINTSHEETS" devLabel="&#xA;Sheet " translation="&#xA;시트 "/>
	<label commandName="FUSIONDOCPRINTSTATUS" devLabel="Sent to Printer" translation="프린터로 전송됨"/>
	<label commandName="FUSIONDOCSENTTOPRINTER" devLabel=" sheets successfully sent to printer." translation=" 시트가 프린터로 성공적으로 전송되었습니다."/>
	<label commandName="FUSIONDOCTABLERANGEMISMATCHTOOLTIP" devLabel="The copied cells cannot be pasted in specified target range." translation="복사한 셀을 지정된 대상 범위에 붙여넣을 수 없습니다."/>
	<label commandName="FUSIONDOC_SKETCH_ALREADY_CONSTRAINED" devLabel="Constraint has already been applied to the selected sketch object." translation="선택한 스케치 객체에 구속조건이 이미 적용되었습니다."/>
	<label commandName="FUSIONDOC_SKETCH_CANNOT_ROTATE" devLabel="One or more objects has constraints that prevent geometry to be rotated." translation="하나 이상의 객체에 형상의 회전을 가로막는 구속조건이 있습니다."/>
	<label commandName="FUSIONDOC_SKETCH_DIM_OVER_CONSTRAINED" devLabel="Sketch geometry is over constrained." translation="스케치 형상이 과도하게 구속되었습니다."/>
	<label commandName="FUSIONDOC_SKETCH_DIM_RELAX_DRAGGING" devLabel="A dimensional constraint or user variable with an expression has been set to a numerical value." translation="표현식이 있는 사용자 변수 또는 치수 구속조건을 숫자 값으로 설정했습니다."/>
	<label commandName="FUSIONDOC_SKETCH_INCONSISTENT" devLabel="Dimensional value or resultant geometry is inconsistent with existing configuration." translation="치수 값 또는 결과 형상이 기존 구성과 일치하지 않습니다."/>
	<label commandName="FUSIONDOC_SKETCH_OVER_CONSTRAINED" devLabel="Sketch geometry is over constrained." translation="스케치 형상이 과도하게 구속되었습니다."/>
	<label commandName="FailToOpenElectronicsDesign" devLabel="Cannot open the associated electronics design." translation="연관된 전자 제품 디자인을 열 수 없습니다."/>
	<label commandName="FailToOpenElectronicsDesignDetail" devLabel="Cannot open the associated electronics design. Open the design manually to create a drawing." translation="연관된 전자 제품 디자인을 열 수 없습니다. 디자인을 수동으로 열어 도면을 작성합니다."/>
	<label commandName="FeatureGroups" devLabel="Group" translation="그룹"/>
	<label commandName="FieldWeld" devLabel="Field Weld" translation="필드 용접"/>
	<label commandName="FileCreateDrawingFromPreviousVersion" devLabel="The file you are trying to create drawing from is currently being saved by another user. Do you want to create it from a previous version instead?&#xA;&#xA;" translation="도면을 작성하는 데 사용하려는 파일을 현재 다른 사용자가 저장하고 있습니다. 대신 이전 버전에서 도면을 작성하시겠습니까?&#xA;&#xA;"/>
	<label commandName="FileCreateDrawingFromPreviousVersion_ccy" devLabel="The component you are trying to create a drawing from is currently being saved by someone else. Do you want to create it from a previous change instead?&#xA;&#xA;" translation="도면을 작성하려는 구성요소를 현재 다른 사용자가 저장하고 있습니다. 대신 이전 변경 사항에서 작성하시겠습니까?&#xA;&#xA;"/>
	<label commandName="FinishEdit" devLabel="Finish Title Block" translation="제목 블록 마침"/>
	<label commandName="FirstFrame" devLabel="First Frame" translation="첫 번째 프레임"/>
	<label commandName="FirstLevel" devLabel="First Level" translation="첫 번째 단계"/>
	<label commandName="FirstLevelTip" devLabel="Creates a parts list containing only the first level components." translation="첫 번째 단계 구성요소만 포함하는 부품 리스트를 작성합니다."/>
	<label commandName="FirstLevelTypeToolTip" devLabel="Swich to First Level partslist." translation="첫 번째 단계 부품 리스트로 전환합니다."/>
	<label commandName="FlatPatternRepresentation" devLabel="Flat Pattern" translation="플랫 패턴"/>
	<label commandName="Flip" devLabel="Flip" translation="반전"/>
	<label commandName="FlipSide" devLabel="Flip Side" translation="측면 반전"/>
	<label commandName="FlipSymbol" devLabel="Flip Symbol" translation="기호 반전"/>
	<label commandName="FocalLength" devLabel="Focal Length" translation="초점 거리"/>
	<label commandName="FocalLengthToolTip" devLabel="Choose the focal length to apply to the perspective view." translation="투시도에 적용할 초점 거리를 선택합니다."/>
	<label commandName="FoldedComponentReprensentation" devLabel="Folded Component" translation="접힌 구성요소"/>
	<label commandName="ForceNestISO" devLabel="Force Nest Isometric -1Dont 0UL 1UR 2LL 3LR 4UC 5LC 6MC" translation="등각투영 강제 내포 -1Dont 0UL 1UR 2LL 3LR 4UC 5LC 6MC"/>
	<label commandName="Fractional" devLabel="Fractional" translation="분수"/>
	<label commandName="From DWG File" devLabel="From DWG File" translation="DWG 파일에서"/>
	<label commandName="From Existing" devLabel="From Existing" translation="기존에서"/>
	<label commandName="From Scratch" devLabel="From Scratch" translation="처음부터"/>
	<label commandName="FromParent" devLabel="From Parent" translation="상위 항목에서"/>
	<label commandName="FromScratchBaseDocument" devLabel="From scratch" translation="처음부터"/>
	<label commandName="Front" devLabel="Front" translation="전면"/>
	<label commandName="Full Length" devLabel="Full Length" translation="전체 길이"/>
	<label commandName="FullArc" devLabel="Full Arc Dimension" translation="전체 호 치수"/>
	<label commandName="FusDocAutoBreak" devLabel="Auto Break" translation="자동 끊기"/>
	<label commandName="FusDocAutoDimension" devLabel="Auto Dimension" translation="자동 치수"/>
	<label commandName="FusDocAutoPrefSave" devLabel=" Automation Preferences saved as " translation=" 자동화 기본 설정이 다음 이름으로 저장됨 "/>
	<label commandName="FusDocAutoRotate" devLabel="Auto Rotate" translation="자동 회전"/>
	<label commandName="FusDocAutomaticDimension" devLabel="Automatic Dimension" translation="자동 치수"/>
	<label commandName="FusDocBaselineDimension" devLabel="Baseline Dimension" translation="기준선 치수"/>
	<label commandName="FusDocBlockRefEditFinishProperties" devLabel="Finish Properties" translation="특성 마침"/>
	<label commandName="FusDocBodiesForAutoRotate" devLabel="Maximum Number Of Bodies For Auto Rotate" translation="자동 회전을 위한 최대 바디 수"/>
	<label commandName="FusDocChainDimension" devLabel="Chain Dimension" translation="체인 치수"/>
	<label commandName="FusDocCircularPatternDimensions" devLabel="Circular Pattern Dimensions" translation="원형 패턴 치수"/>
	<label commandName="FusDocColumnHeader" devLabel="Column" translation="열"/>
	<label commandName="FusDocComponentNamesToExclude" devLabel="Omit Components with Keywords" translation="키워드가 있는 구성요소 생략"/>
	<label commandName="FusDocComponentNamesToExcludeDesc" devLabel="Lets you type any components for which you don't want a sheet to be created." translation="시트를 작성하지 않을 구성요소를 입력할 수 있습니다."/>
	<label commandName="FusDocCustomLineWidth1" devLabel="0.00mm" translation="0.00mm"/>
	<label commandName="FusDocCustomLineWidth10" devLabel="0.35mm" translation="0.35mm"/>
	<label commandName="FusDocCustomLineWidth11" devLabel="0.40mm" translation="0.40mm"/>
	<label commandName="FusDocCustomLineWidth12" devLabel="0.50mm" translation="0.50mm"/>
	<label commandName="FusDocCustomLineWidth13" devLabel="0.53mm" translation="0.53mm"/>
	<label commandName="FusDocCustomLineWidth14" devLabel="0.60mm" translation="0.60mm"/>
	<label commandName="FusDocCustomLineWidth15" devLabel="0.70mm" translation="0.70mm"/>
	<label commandName="FusDocCustomLineWidth16" devLabel="0.80mm" translation="0.80mm"/>
	<label commandName="FusDocCustomLineWidth17" devLabel="0.90mm" translation="0.90mm"/>
	<label commandName="FusDocCustomLineWidth18" devLabel="1.00mm" translation="1.00mm"/>
	<label commandName="FusDocCustomLineWidth19" devLabel="1.06mm" translation="1.06mm"/>
	<label commandName="FusDocCustomLineWidth2" devLabel="0.05mm" translation="0.05mm"/>
	<label commandName="FusDocCustomLineWidth20" devLabel="1.20mm" translation="1.20mm"/>
	<label commandName="FusDocCustomLineWidth21" devLabel="1.40mm" translation="1.40mm"/>
	<label commandName="FusDocCustomLineWidth22" devLabel="1.58mm" translation="1.58mm"/>
	<label commandName="FusDocCustomLineWidth23" devLabel="2.00mm" translation="2.00mm"/>
	<label commandName="FusDocCustomLineWidth24" devLabel="2.11mm" translation="2.11mm"/>
	<label commandName="FusDocCustomLineWidth3" devLabel="0.09mm" translation="0.09mm"/>
	<label commandName="FusDocCustomLineWidth4" devLabel="0.13mm" translation="0.13mm"/>
	<label commandName="FusDocCustomLineWidth5" devLabel="0.15mm" translation="0.15mm"/>
	<label commandName="FusDocCustomLineWidth6" devLabel="0.18mm" translation="0.18mm"/>
	<label commandName="FusDocCustomLineWidth7" devLabel="0.20mm" translation="0.20mm"/>
	<label commandName="FusDocCustomLineWidth8" devLabel="0.25mm" translation="0.25mm"/>
	<label commandName="FusDocCustomLineWidth9" devLabel="0.30mm" translation="0.30mm"/>
	<label commandName="FusDocDefaultSheetSizeValue0" devLabel="A0 (1189mm x 841mm)" translation="A0(1189mm x 841mm)"/>
	<label commandName="FusDocDefaultSheetSizeValue1" devLabel="A1 (841mm x 594mm)" translation="A1(841mm x 594mm)"/>
	<label commandName="FusDocDefaultSheetSizeValue10" devLabel="D (34in x 22in)" translation="D(34인치 x 22인치)"/>
	<label commandName="FusDocDefaultSheetSizeValue11" devLabel="E (44in x 34in)" translation="E(44인치 x 34인치)"/>
	<label commandName="FusDocDefaultSheetSizeValue2" devLabel="A2 (594mm x 420mm)" translation="A2(594mm x 420mm)"/>
	<label commandName="FusDocDefaultSheetSizeValue3" devLabel="A3 (420mm x 297mm)" translation="A3(420mm x 297mm)"/>
	<label commandName="FusDocDefaultSheetSizeValue4" devLabel="A4 (210mm x 297mm)" translation="A4(210mm x 297mm)"/>
	<label commandName="FusDocDefaultSheetSizeValue5" devLabel="A4 (297mm x 210mm)" translation="A4(297mm x 210mm)"/>
	<label commandName="FusDocDefaultSheetSizeValue6" devLabel="A (8.5in x 11in)" translation="A(8.5인치 x 11인치)"/>
	<label commandName="FusDocDefaultSheetSizeValue7" devLabel="A (11in x 8.5in)" translation="A(11인치 x 8.5인치)"/>
	<label commandName="FusDocDefaultSheetSizeValue8" devLabel="B (17in x 11in)" translation="B(17인치 x 11인치)"/>
	<label commandName="FusDocDefaultSheetSizeValue9" devLabel="C (22in x 17in)" translation="C(22인치 x 17인치)"/>
	<label commandName="FusDocDimensionDirection1" devLabel="Bottom left" translation="저면도 왼쪽"/>
	<label commandName="FusDocDimensionDirection2" devLabel="Bottom right" translation="저면도 오른쪽"/>
	<label commandName="FusDocDimensionDirection3" devLabel="Top left" translation="상단 왼쪽"/>
	<label commandName="FusDocDimensionDirection4" devLabel="Top right" translation="상단 오른쪽"/>
	<label commandName="FusDocDimensionHDirection" devLabel="Dimension Datum" translation="치수 데이텀"/>
	<label commandName="FusDocDimensionStrategy" devLabel="Dimension Strategy" translation="치수 전략"/>
	<label commandName="FusDocDrawingGenerationMessage" devLabel="Generation of %1% started at %2%. This may take several minutes. We will notify you when it is complete." translation="%1% 생성이 %2%에서 시작되었습니다. 이 작업은 몇 분 정도 걸릴 수 있습니다. 작업이 완료되면 알림이 표시됩니다."/>
	<label commandName="FusDocDrawingGenerationStarted" devLabel="Generation started" translation="생성이 시작됨"/>
	<label commandName="FusDocFacesForAutoRotate" devLabel="Maximum Number Of Faces For Auto Rotate" translation="자동 회전을 위한 최대 면 수"/>
	<label commandName="FusDocFailedToDownload" devLabel="Failed to download selected template file" translation="선택한 템플릿 파일을 다운로드하지 못했습니다."/>
	<label commandName="FusDocFailedToPushAutoSettings" devLabel="Failed to push automation settings to template" translation="자동화 설정을 템플릿에 푸시하지 못했습니다."/>
	<label commandName="FusDocGetAlternateDim" devLabel="Get Alternate Dimension" translation="대체 치수 가져오기"/>
	<label commandName="FusDocGetAutoDimInfo" devLabel="Get Auto Dimension Info" translation="자동 치수 정보 가져오기"/>
	<label commandName="FusDocHighlightDimensionset" devLabel="Highlight Dimensionset" translation="치수 세트 강조 표시"/>
	<label commandName="FusDocInterLoopDimensionStrategy" devLabel="Inter Loop Dimension Strategy" translation="루프 간 치수 전략"/>
	<label commandName="FusDocLinearDimensionPrecision0" devLabel="0" translation="0"/>
	<label commandName="FusDocLinearDimensionPrecision1" devLabel="0.1" translation="0.1"/>
	<label commandName="FusDocLinearDimensionPrecision10" devLabel="1" translation="1"/>
	<label commandName="FusDocLinearDimensionPrecision11" devLabel="1/2" translation="1/2"/>
	<label commandName="FusDocLinearDimensionPrecision12" devLabel="1/4" translation="1/4"/>
	<label commandName="FusDocLinearDimensionPrecision13" devLabel="1/8" translation="1/8"/>
	<label commandName="FusDocLinearDimensionPrecision14" devLabel="1/16" translation="1/16"/>
	<label commandName="FusDocLinearDimensionPrecision15" devLabel="1/32" translation="1/32"/>
	<label commandName="FusDocLinearDimensionPrecision16" devLabel="1/64" translation="1/64"/>
	<label commandName="FusDocLinearDimensionPrecision17" devLabel="1/128" translation="1/128"/>
	<label commandName="FusDocLinearDimensionPrecision18" devLabel="1/256" translation="1/256"/>
	<label commandName="FusDocLinearDimensionPrecision19" devLabel="0'-0&quot;" translation="0'-0&quot;"/>
	<label commandName="FusDocLinearDimensionPrecision2" devLabel="0.12" translation="0.12"/>
	<label commandName="FusDocLinearDimensionPrecision20" devLabel="0'-0.1&quot;" translation="0'-0.1&quot;"/>
	<label commandName="FusDocLinearDimensionPrecision21" devLabel="0'-0.12&quot;" translation="0'-0.12&quot;"/>
	<label commandName="FusDocLinearDimensionPrecision22" devLabel="0'-0.123&quot;" translation="0'-0.123&quot;"/>
	<label commandName="FusDocLinearDimensionPrecision23" devLabel="0'-0.1234&quot;" translation="0'-0.1234&quot;"/>
	<label commandName="FusDocLinearDimensionPrecision24" devLabel="0'-0.12345&quot;" translation="0'-0.12345&quot;"/>
	<label commandName="FusDocLinearDimensionPrecision25" devLabel="0'-0.123456&quot;" translation="0'-0.123456&quot;"/>
	<label commandName="FusDocLinearDimensionPrecision26" devLabel="0'-0.1234567&quot;" translation="0'-0.1234567&quot;"/>
	<label commandName="FusDocLinearDimensionPrecision27" devLabel="0'-0.12345678&quot;" translation="0'-0.12345678&quot;"/>
	<label commandName="FusDocLinearDimensionPrecision28" devLabel="0'-0&quot;" translation="0'-0&quot;"/>
	<label commandName="FusDocLinearDimensionPrecision29" devLabel="0'-0 1/2&quot;" translation="0'-0 1/2&quot;"/>
	<label commandName="FusDocLinearDimensionPrecision3" devLabel="0.123" translation="0.123"/>
	<label commandName="FusDocLinearDimensionPrecision30" devLabel="0'-0 1/4&quot;" translation="0'-0 1/4&quot;"/>
	<label commandName="FusDocLinearDimensionPrecision31" devLabel="0'-0 1/8&quot;" translation="0'-0 1/8&quot;"/>
	<label commandName="FusDocLinearDimensionPrecision32" devLabel="0'-0 1/16&quot;" translation="0'-0 1/16&quot;"/>
	<label commandName="FusDocLinearDimensionPrecision33" devLabel="0'-0 1/32&quot;" translation="0'-0 1/32&quot;"/>
	<label commandName="FusDocLinearDimensionPrecision34" devLabel="0'-0 1/64&quot;" translation="0'-0 1/64&quot;"/>
	<label commandName="FusDocLinearDimensionPrecision35" devLabel="0'-0 1/128&quot;" translation="0'-0 1/128&quot;"/>
	<label commandName="FusDocLinearDimensionPrecision36" devLabel="0'-0 1/256&quot;" translation="0'-0 1/256&quot;"/>
	<label commandName="FusDocLinearDimensionPrecision4" devLabel="0.1234" translation="0.1234"/>
	<label commandName="FusDocLinearDimensionPrecision5" devLabel="0.12345" translation="0.12345"/>
	<label commandName="FusDocLinearDimensionPrecision6" devLabel="0.123456" translation="0.123456"/>
	<label commandName="FusDocLinearDimensionPrecision7" devLabel="0.1234567" translation="0.1234567"/>
	<label commandName="FusDocLinearDimensionPrecision8" devLabel="0.12345678" translation="0.12345678"/>
	<label commandName="FusDocMinimumIndividualBreakPercentage" devLabel="Minimum Individual Break Percentage" translation="최소 개별 끊기 백분율"/>
	<label commandName="FusDocMinimumTotalBreakPercentage" devLabel="Minimum Total Break Percentage" translation="최소 총 끊기 백분율"/>
	<label commandName="FusDocOpenDrawing" devLabel="Open drawing" translation="도면 열기"/>
	<label commandName="FusDocOrdinateDimension" devLabel="Ordinate Dimension" translation="세로좌표 치수"/>
	<label commandName="FusDocOverallDimension" devLabel="Overall Dimension" translation="전체 치수"/>
	<label commandName="FusDocPreferHnTNoteOverDims" devLabel="Prefer hole and thread note over dimensions" translation="치수보다 홀 및 스레드 주 선호"/>
	<label commandName="FusDocPreferSymmetricDims" devLabel="Prefer Symmetric Dims for Symmertic Part" translation="대칭 부품에 대해 대칭 치수 선호"/>
	<label commandName="FusDocPreferredSheetSize" devLabel="Preferred Sheet Sizes" translation="기본 시트 크기"/>
	<label commandName="FusDocReadyForReview" devLabel=" ready for review" translation=" 검토 준비 완료"/>
	<label commandName="FusDocSizeHeader" devLabel="Size" translation="크기"/>
	<label commandName="FusDocSymmetricDimension" devLabel="Symmetric Dimension" translation="대칭 치수"/>
	<label commandName="FusDocSymmetricWithBaseLineDimension" devLabel="Symmetric With Baseline Dimension" translation="기준선 치수 사용 대칭"/>
	<label commandName="FusDocSymmetricWithOrdinateDimension" devLabel="Symmetric With Ordinate Dimension" translation="세로좌표 치수 사용 대칭"/>
	<label commandName="FusDocTextHeightASME0" devLabel="0.07in" translation="0.07인치"/>
	<label commandName="FusDocTextHeightASME1" devLabel="0.1in" translation="0.1인치"/>
	<label commandName="FusDocTextHeightASME2" devLabel="0.12in" translation="0.12인치"/>
	<label commandName="FusDocTextHeightASME3" devLabel="0.24in" translation="0.24인치"/>
	<label commandName="FusDocTextHeightASME4" devLabel="0.35in" translation="0.35인치"/>
	<label commandName="FusDocTextHeightASME5" devLabel="0.5in" translation="0.5인치"/>
	<label commandName="FusDocTextHeightASME6" devLabel="0.75in" translation="0.75인치"/>
	<label commandName="FusDocTextHeightISO0" devLabel="1.8mm" translation="1.8mm"/>
	<label commandName="FusDocTextHeightISO1" devLabel="2.5mm" translation="2.5mm"/>
	<label commandName="FusDocTextHeightISO2" devLabel="3.5mm" translation="3.5mm"/>
	<label commandName="FusDocTextHeightISO3" devLabel="5mm" translation="5mm"/>
	<label commandName="FusDocTextHeightISO4" devLabel="7mm" translation="7mm"/>
	<label commandName="FusDocTextHeightISO5" devLabel="10mm" translation="10mm"/>
	<label commandName="FusDocTextHeightISO6" devLabel="14mm" translation="14mm"/>
	<label commandName="FusDocTextHeightISO7" devLabel="20mm" translation="20mm"/>
	<label commandName="FusDocViewJobStatus" devLabel="View job status" translation="작업 상태 보기"/>
	<label commandName="FusionAddTitleBlockCommandDialogTitle1" devLabel="NEW TITLE BLOCK" translation="새 제목 블록"/>
	<label commandName="FusionBendTableEdit" devLabel="BEND TABLE" translation="절곡부 테이블"/>
	<label commandName="FusionBrokenView" devLabel="Break View" translation="뷰 끊기"/>
	<label commandName="FusionBrokenViewEdit" devLabel="Broken View Edit" translation="끊어진 뷰 편집"/>
	<label commandName="FusionChangeBorderVisibilityCommand" devLabel="Show/Hide" translation="표시/숨기기"/>
	<label commandName="FusionChangeDimensionUnitsSettings" devLabel="Change Dimension Units" translation="치수 단위 변경"/>
	<label commandName="FusionChangeDisplayBorderCommand" devLabel="Change Display Border" translation="경계 표시 변경"/>
	<label commandName="FusionChangeDisplayTitleBlockCommand" devLabel="Change Display Title Block" translation="제목 블록 표시 변경"/>
	<label commandName="FusionChangeDocumentSettings" devLabel="Change Document Settings" translation="문서 설정 변경"/>
	<label commandName="FusionChangeFontSettings" devLabel="Change Font" translation="글꼴 변경"/>
	<label commandName="FusionChangeLineWidthGroupSettings" devLabel="Change Line Width Group" translation="선 폭 그룹 변경"/>
	<label commandName="FusionChangeMultiDocSettingCommand" devLabel="Change Document Settings" translation="문서 설정 변경"/>
	<label commandName="FusionChangeMultiSheetSettingsCommand" devLabel="Change Sheet Settings" translation="시트 설정 변경"/>
	<label commandName="FusionChangeRevisionScopeSettings" devLabel="Change Revision Scope" translation="리비전 범위 변경"/>
	<label commandName="FusionChangeSheetSettings" devLabel="Sheet Size" translation="시트 크기"/>
	<label commandName="FusionChangeSheetSizeCommand" devLabel="Change Sheet Size" translation="시트 크기 변경"/>
	<label commandName="FusionChangeTextHeightGroupSettings" devLabel="Change Text Height Group" translation="문자 높이 그룹 변경"/>
	<label commandName="FusionChangeTitleBlockCommand" devLabel="Change Title Block" translation="제목 블록 변경"/>
	<label commandName="FusionChangeTitleBlockVisibilityCommand" devLabel="Show/Hide" translation="표시/숨기기"/>
	<label commandName="FusionConfigTableEdit" devLabel="CONFIGURATION TABLE" translation="구성 테이블"/>
	<label commandName="FusionCreateDrawingFromComponents" devLabel="Create Drawing" translation="도면 작성"/>
	<label commandName="FusionCreateFusionDrawingCommand" devLabel="Cannot find downloaded file. Expected filepath: %1%" translation="다운로드한 파일을 찾을 수 없습니다. 예상 파일 경로: %1%"/>
	<label commandName="FusionCreateFusionDrawingCommandError" devLabel="An unexpected error occurred while downloading and opening a document." translation="문서를 다운로드하고 여는 동안 예기치 않은 오류가 발생했습니다."/>
	<label commandName="FusionCropOutlineCommand" devLabel="Show / Hide Crop Outline" translation="자르기 외곽선 표시/숨기기"/>
	<label commandName="FusionCropView" devLabel="Crop View" translation="자르기 뷰"/>
	<label commandName="FusionCropViewEditCommand" devLabel="Edit Crop View" translation="자르기 뷰 편집"/>
	<label commandName="FusionDashboardCreateFusionDrawingCommand" devLabel="Cannot find downloaded file. Expected filepath: %1%" translation="다운로드한 파일을 찾을 수 없습니다. 예상 파일 경로: %1%"/>
	<label commandName="FusionDashboardCreateFusionDrawingCommandError" devLabel="An unexpected error occurred while downloading and opening a document." translation="문서를 다운로드하고 여는 동안 예기치 않은 오류가 발생했습니다."/>
	<label commandName="FusionDimensionDialogAltUnitsDisplatTrailingZeros" devLabel="Trailing Zeros" translation="후행 0"/>
	<label commandName="FusionDimensionDialogAltUnitsDisplayLeadingZeros" devLabel="Leading Zeros" translation="선행 0"/>
	<label commandName="FusionDimensionDialogAltUnitsDisplaySuffix" devLabel="Unit Abbreviation" translation="단위 약어"/>
	<label commandName="FusionDimensionDialogAltUnitsZerosAndUnits" devLabel="Zeros/Units" translation="0/단위"/>
	<label commandName="FusionDimensionDialogAlternateLinearFormat" devLabel="Format" translation="형식"/>
	<label commandName="FusionDimensionDialogAlternateLinearPrecision" devLabel="Linear Precision" translation="선형 정밀도"/>
	<label commandName="FusionDimensionDialogAlternateTolLinearPrecision" devLabel="Linear Tolerance Precision" translation="선형 공차 정밀도"/>
	<label commandName="FusionDimensionDialogAlternateUnits" devLabel="Alternate Units" translation="대체 단위"/>
	<label commandName="FusionDimensionDialogFit" devLabel="Fit" translation="맞춤"/>
	<label commandName="FusionDimensionDialogFitAndDeviations" devLabel="Tolerance class with deviations" translation="편차로 표시된 공차 클래스"/>
	<label commandName="FusionDimensionDialogFitAndLimits" devLabel="Tolerance class with limits" translation="한계로 표시된 공차 클래스"/>
	<label commandName="FusionDimensionDialogFitClearance" devLabel="Clearance" translation="틈새"/>
	<label commandName="FusionDimensionDialogFitCustom" devLabel="Custom" translation="사용자 설정"/>
	<label commandName="FusionDimensionDialogFitCustomTip" devLabel="Custom fit" translation="사용자 맞춤"/>
	<label commandName="FusionDimensionDialogFitFormat" devLabel="Show fit" translation="맞춤 표시"/>
	<label commandName="FusionDimensionDialogFitHole" devLabel="Hole" translation="홀"/>
	<label commandName="FusionDimensionDialogFitInterference" devLabel="Interference" translation="간섭"/>
	<label commandName="FusionDimensionDialogFitLabel" devLabel="Limits" translation="한계"/>
	<label commandName="FusionDimensionDialogFitOnly" devLabel="Tolerance class only" translation="공차 클래스만 해당"/>
	<label commandName="FusionDimensionDialogFitPreferred" devLabel="Preferred Fit" translation="기본 설정 맞춤"/>
	<label commandName="FusionDimensionDialogFitShaft" devLabel="Shaft" translation="샤프트"/>
	<label commandName="FusionDimensionDialogFitTarget" devLabel="Hole/Shaft" translation="홀/샤프트"/>
	<label commandName="FusionDimensionDialogFitTolFormat" devLabel="Show tolerance" translation="공차 표시"/>
	<label commandName="FusionDimensionDialogFitTransition" devLabel="Transtion" translation="전환"/>
	<label commandName="FusionDimensionDialogFitType" devLabel="Type" translation="유형"/>
	<label commandName="FusionDimensionDialogGradeHole" devLabel="Tolerance Hole Grade" translation="공차 홀 등급"/>
	<label commandName="FusionDimensionDialogGradeShaft" devLabel="Tolerance Shaft Grade" translation="공차 샤프트 등급"/>
	<label commandName="FusionDimensionDialogGroupAlternateUnits" devLabel="Alternate Units" translation="대체 단위"/>
	<label commandName="FusionDimensionDialogGroupInspection" devLabel="Inspection" translation="측정"/>
	<label commandName="FusionDimensionDialogGroupPrimaryUnits" devLabel="Primary Units" translation="1차 단위"/>
	<label commandName="FusionDimensionDialogGroupText" devLabel="Text" translation="텍스트"/>
	<label commandName="FusionDimensionDialogGroupTolerances" devLabel="Tolerances" translation="공차"/>
	<label commandName="FusionDimensionDialogHoleClass" devLabel="Hole Class" translation="홀 클래스"/>
	<label commandName="FusionDimensionDialogInspectionAngular" devLabel="Angular" translation="각도"/>
	<label commandName="FusionDimensionDialogInspectionFrame" devLabel="Frame" translation="프레임"/>
	<label commandName="FusionDimensionDialogInspectionLabel" devLabel="Label" translation="레이블"/>
	<label commandName="FusionDimensionDialogInspectionNoFrame" devLabel="No Frame" translation="프레임 없음"/>
	<label commandName="FusionDimensionDialogInspectionRate" devLabel="Rate" translation="속도"/>
	<label commandName="FusionDimensionDialogInspectionRound" devLabel="Round" translation="원형"/>
	<label commandName="FusionDimensionDialogLowerTolerance" devLabel="Lower Tolerance" translation="하한 공차"/>
	<label commandName="FusionDimensionDialogNotToScale" devLabel="Not To Scale" translation="축척하지 않음"/>
	<label commandName="FusionDimensionDialogPrimaryAngularPrecision" devLabel="Angular Precision" translation="각도 정밀도"/>
	<label commandName="FusionDimensionDialogPrimaryDisplayLeadingZeroInput" devLabel="Leading Zeros" translation="선행 0"/>
	<label commandName="FusionDimensionDialogPrimaryDisplaySuffixInput" devLabel="Unit Abbreviation" translation="단위 약어"/>
	<label commandName="FusionDimensionDialogPrimaryDisplayTrailingZeroInput" devLabel="Trailing Zeros" translation="후행 0"/>
	<label commandName="FusionDimensionDialogPrimaryLinearPrecision" devLabel="Linear Precision" translation="선형 정밀도"/>
	<label commandName="FusionDimensionDialogPrimaryTolLinearPrecision" devLabel="Linear Tolerance Precision" translation="선형 공차 정밀도"/>
	<label commandName="FusionDimensionDialogPrimaryUnitFormat" devLabel="Format" translation="형식"/>
	<label commandName="FusionDimensionDialogPrimaryUnits" devLabel="Primary Units" translation="1차 단위"/>
	<label commandName="FusionDimensionDialogPrimaryUnitsZerosAndUnits" devLabel="Zeros/Units" translation="0/단위"/>
	<label commandName="FusionDimensionDialogReferenceDimension" devLabel="Reference Dimension" translation="참조 치수"/>
	<label commandName="FusionDimensionDialogRepresentation" devLabel="Representation" translation="표현"/>
	<label commandName="FusionDimensionDialogShaftClass" devLabel="Shaft Class" translation="샤프트 클래스"/>
	<label commandName="FusionDimensionDialogSymbolPalette" devLabel="Insert Symbol" translation="기호 삽입"/>
	<label commandName="FusionDimensionDialogTheoreticallyExact" devLabel="Theoretically Exact" translation="이론상 정확"/>
	<label commandName="FusionDimensionDialogTolDiv" devLabel="/" translation="/"/>
	<label commandName="FusionDimensionDialogTolerance" devLabel="Tolerance" translation="공차"/>
	<label commandName="FusionDimensionDialogToleranceDeviation" devLabel="Deviation" translation="편차"/>
	<label commandName="FusionDimensionDialogToleranceLimit" devLabel="Limit" translation="제한"/>
	<label commandName="FusionDimensionDialogToleranceSymmetrical" devLabel="Symmetrical" translation="대칭"/>
	<label commandName="FusionDimensionDialogToleranceType" devLabel="Type" translation="유형"/>
	<label commandName="FusionDimensionDialogUpperTolerance" devLabel="Upper Tolerance" translation="상한 공차"/>
	<label commandName="FusionDimensionDialoganceFitClass" devLabel="Tolarance class" translation="공차 클래스"/>
	<label commandName="FusionDimensionDialoganceFitStackLine" devLabel="Fit stack line" translation="맞춤 스택 선"/>
	<label commandName="FusionDimensionDialoganceFitStackLineDiagonal" devLabel="Fit stack diagonal" translation="맞춤 스택 대각선"/>
	<label commandName="FusionDimensionDialoganceFitStackNoLine" devLabel="Fit stack no line" translation="맞춤 스택 선 없음"/>
	<label commandName="FusionDocAcCoreConsolePathName" devLabel="Path to AcCoreConsole" translation="AcCoreConsole의 경로"/>
	<label commandName="FusionDocAcCoreConsoleToolTip" devLabel="Path to AcCoreConsole" translation="AcCoreConsole의 경로"/>
	<label commandName="FusionDocAddDimensionBreak" devLabel="Add Dimension Break" translation="치수 끊기 추가"/>
	<label commandName="FusionDocAlignedDimension" devLabel="Aligned Dimension" translation="정렬 치수"/>
	<label commandName="FusionDocAngularDimension" devLabel="Angular Dimension" translation="각도 치수"/>
	<label commandName="FusionDocArc" devLabel="3-Point Arc" translation="3점 호"/>
	<label commandName="FusionDocArcCenter" devLabel="ArcCenter" translation="ArcCenter"/>
	<label commandName="FusionDocArcDimension" devLabel="Arc Length Dimension" translation="호 길이 치수"/>
	<label commandName="FusionDocArcTangent" devLabel="ArcTangent" translation="ArcTangent"/>
	<label commandName="FusionDocArrow" devLabel="Leader" translation="지시선"/>
	<label commandName="FusionDocAttDef" devLabel="Attribute" translation="속성"/>
	<label commandName="FusionDocAttEdit" devLabel="Attribute Definition Edit" translation="속성 정의 편집"/>
	<label commandName="FusionDocAutoCutView" devLabel="Auto Cut View" translation="자동 절단 뷰"/>
	<label commandName="FusionDocAutoDetailedView" devLabel="Auto Detailed View" translation="자동 상세 뷰"/>
	<label commandName="FusionDocAutoNest" devLabel="Auto Nest" translation="자동 내포"/>
	<label commandName="FusionDocAutoScale" devLabel="Auto Scale" translation="자동 축척"/>
	<label commandName="FusionDocAutoSectionalView" devLabel="Auto Sectional View" translation="자동 단면 뷰"/>
	<label commandName="FusionDocAutoView" devLabel="Auto View" translation="자동 뷰"/>
	<label commandName="FusionDocAutoViewMaxBodiesToConsider" devLabel="Max Bodies To Consider for Auto View" translation="자동 뷰에 고려할 최대 바디"/>
	<label commandName="FusionDocAutoViewPercentDiffInViews" devLabel="Percentage Difference In Views" translation="뷰에서의 백분율 차이"/>
	<label commandName="FusionDocAutomationSettingsCmd" devLabel="Change Automation Settings" translation="자동화 설정 변경"/>
	<label commandName="FusionDocAutomationSettingsCmdTooltip" devLabel="Change Automation Settings" translation="자동화 설정 변경"/>
	<label commandName="FusionDocBalloon" devLabel="Balloon" translation="품번기호"/>
	<label commandName="FusionDocBalloonsBodyNotInComponentTip" devLabel="A balloon can only be placed on a component" translation="품번기호는 구성요소에만 배치할 수 있음"/>
	<label commandName="FusionDocBalloonsBodyNotInComponentTip2" devLabel="&lt;b&gt;A balloon can only be placed on a component.&lt;/b&gt;&lt;br/&gt;&lt;br/&gt;Convert bodies to components in the Design." translation="&lt;b&gt;품번기호는 구성요소에만 배치할 수 있습니다.&lt;/b&gt;&lt;br/&gt;&lt;br/&gt;설계에서 본체를 구성요소로 변환하십시오."/>
	<label commandName="FusionDocBalloonsCannotBePutOnSketchTip" devLabel="A balloon cannot be put on sketches" translation="스케치에 품번기호를 배치할 수 없습니다."/>
	<label commandName="FusionDocBalloonsCannotBePutOnSketchTip2" devLabel="&lt;b&gt;A balloon cannot be put on sketches.&lt;/b&gt;" translation="&lt;b&gt;스케치에 품번기호를 배치할 수 없습니다.&lt;/b&gt;"/>
	<label commandName="FusionDocBaselineDimension" devLabel="Baseline Dimension" translation="기준선 치수"/>
	<label commandName="FusionDocBendNoteLeader" devLabel="Bend Note" translation="절곡부 주"/>
	<label commandName="FusionDocBendTable" devLabel="Bend Table" translation="절곡부 테이블"/>
	<label commandName="FusionDocBlockEdit" devLabel="Edit Title Block" translation="제목 블록 편집"/>
	<label commandName="FusionDocBorderEdit" devLabel="Edit Border" translation="경계 편집"/>
	<label commandName="FusionDocBrokenChainViewUnsupported" devLabel="You cannot create a breakout section on a Break View and its linked views." translation="파단 뷰 및 거기에 링크된 뷰에서는 브레이크 아웃 단면을 작성할 수 없습니다."/>
	<label commandName="FusionDocBrokenChainViewUnsupportedTitle" devLabel="Cannot create breakout section" translation="브레이크 아웃 단면을 작성할 수 없습니다."/>
	<label commandName="FusionDocBrokenViewAuxViewUnsupported" devLabel="Cannot add breaks to an auxiliary view" translation="보조 뷰에 파단을 추가할 수 없습니다."/>
	<label commandName="FusionDocBrokenViewBreakoutViewUnsupported" devLabel="You cannot create a Break View on a Breakout Section View and its linked views." translation="브레이크 아웃 단면 뷰 및 거기에 링크된 뷰에서는 파단 뷰를 작성할 수 없습니다."/>
	<label commandName="FusionDocBrokenViewCropViewChainUnsupported" devLabel="Cannot add breaks to a view where the parent is a crop view" translation="상위 뷰가 자르기 뷰인 뷰에는 끊기를 추가할 수 없음"/>
	<label commandName="FusionDocBrokenViewCropViewUnsupported" devLabel="Cannot add breaks to a crop view" translation="자르기 뷰에는 끊기를 추가할 수 없음"/>
	<label commandName="FusionDocCancelDeleteSymbolButton" devLabel="Cancel" translation="취소"/>
	<label commandName="FusionDocCenterEditPattern" devLabel="Center Mark Pattern" translation="중심 표식 패턴"/>
	<label commandName="FusionDocCenterPattern" devLabel="Center Mark Pattern" translation="중심 표식 패턴"/>
	<label commandName="FusionDocCenterReassociate" devLabel="Reassociate" translation="재연관"/>
	<label commandName="FusionDocCenterline" devLabel="Center Line" translation="중심선"/>
	<label commandName="FusionDocCentermark" devLabel="Center Mark" translation="중심 표식"/>
	<label commandName="FusionDocChainDimension" devLabel="Chain Dimension" translation="체인 치수"/>
	<label commandName="FusionDocCircle" devLabel="Center Radius Circle" translation="중심 반지름 원"/>
	<label commandName="FusionDocCircle2Point" devLabel="Circle2Point" translation="Circle2Point"/>
	<label commandName="FusionDocCircle3Point" devLabel="Circle3Point" translation="Circle3Point"/>
	<label commandName="FusionDocCircleDiameter" devLabel="CircleDiameter" translation="CircleDiameter"/>
	<label commandName="FusionDocCommaSeparator" devLabel=", " translation=", "/>
	<label commandName="FusionDocContinueEditingExistingBorderBlock" devLabel="The Border contains no geometry or text. Please add some geometry and/or text before finishing the edit.&#xA;If you want to hide the border from a sheet, go to Browser &gt; Sheet Settings &gt; Display Border.&#xA;" translation="경계에 형상 또는 텍스트가 없습니다. 편집을 마치기 전에 형상 및/또는 텍스트를 추가하십시오.&#xA;시트에서 경계를 숨기려면 브라우저 &gt; 시트 설정 &gt; 경계 표시로 이동하십시오.&#xA;"/>
	<label commandName="FusionDocContinueEditingExistingTitleBlock" devLabel="The Title Block contains no geometry or text. Please add some geometry and/or text before finishing the edit.&#xA;If you want to hide the Title Block from a sheet, go to Browser &gt; Sheet Settings &gt; Display Title Block.&#xA;" translation="제목 블록에 형상 또는 텍스트가 없습니다. 편집을 마치기 전에 형상 및/또는 텍스트를 추가하십시오.&#xA;시트에서 제목 블록을 숨기려면 브라우저 &gt; 시트 설정 &gt; 제목 블록 표시로 이동하십시오.&#xA;"/>
	<label commandName="FusionDocCopy" devLabel="Copy" translation="복사"/>
	<label commandName="FusionDocCopyCustomTableCommand" devLabel="Copy" translation="복사"/>
	<label commandName="FusionDocCopyDefaultCommand" devLabel="Copy" translation="복사"/>
	<label commandName="FusionDocCopyGeomEntityCommand" devLabel="Copy" translation="복사"/>
	<label commandName="FusionDocCopyMtextCommand" devLabel="Copy" translation="복사"/>
	<label commandName="FusionDocCopySketchCommand" devLabel="Copy" translation="복사"/>
	<label commandName="FusionDocCreateDrawingFailed" devLabel="Create drawing failed" translation="도면 작성 실패"/>
	<label commandName="FusionDocCreateIsometricView" devLabel="Isometric View" translation="등각투영 뷰"/>
	<label commandName="FusionDocCropBreakViewUnsupportedTitle" devLabel="Cannot crop break views" translation="끊기 뷰는 자를 수 없음"/>
	<label commandName="FusionDocCropDetailViewUnsupportedTitle" devLabel="Cannot crop detail views" translation="상세 뷰는 자를 수 없음"/>
	<label commandName="FusionDocCropPerspectiveViewUnsupportedTitle" devLabel="Cannot crop perspective views" translation="투시도는 자를 수 없음"/>
	<label commandName="FusionDocCropViewBreakViewUnsupported" devLabel="You cannot crop a Break View." translation="끊기 뷰는 자를 수 없습니다."/>
	<label commandName="FusionDocCropViewDetailViewUnsupported" devLabel="You cannot crop a Detail View." translation="상세 뷰는 자를 수 없습니다."/>
	<label commandName="FusionDocCropViewOnCropViewUnsupportedMessage" devLabel="You can crop a view only once.&#xA;&#xA;You can edit the existing crop view by selecting the crop window." translation="뷰는 한 번만 자를 수 있습니다.&#xA;&#xA;자르기 창을 선택하여 기존 자르기 뷰를 편집할 수 있습니다."/>
	<label commandName="FusionDocCropViewOnCropViewUnsupportedTitle" devLabel="View is already cropped" translation="뷰가 이미 잘렸습니다."/>
	<label commandName="FusionDocCropViewPerspectiveViewUnsupported" devLabel="You cannot crop a Perspective View." translation="투시도는 자를 수 없습니다."/>
	<label commandName="FusionDocCropWindowCurveUnsupportedCreation" devLabel="The crop window and the selection boundary of the view must overlap." translation="자르기 창과 뷰의 선택 경계가 겹쳐야 합니다."/>
	<label commandName="FusionDocCropWindowCurveUnsupportedTitle" devLabel="Cannot crop outside the view" translation="뷰 외부는 자를 수 없음"/>
	<label commandName="FusionDocCropWindowRedrawProfileBtnText" devLabel="Redraw Crop Window" translation="자르기 창 다시 그리기"/>
	<label commandName="FusionDocCustomLeaderReassociate" devLabel="Reassociate" translation="재연관"/>
	<label commandName="FusionDocCutDefaultCommand" devLabel="Cut" translation="잘라내기"/>
	<label commandName="FusionDocCutGeomEntityCommand" devLabel="Cut" translation="잘라내기"/>
	<label commandName="FusionDocCutMtextCommand" devLabel="Cut" translation="잘라내기"/>
	<label commandName="FusionDocCutSketchCommand" devLabel="Cut" translation="잘라내기"/>
	<label commandName="FusionDocDNTWD1" devLabel="Error" translation="오류"/>
	<label commandName="FusionDocDNTWD2" devLabel="This drawing has no drawing views. To add Parts List/Bend Table, first add a base view." translation="이 도면에는 도면 뷰가 없습니다. 부품 리스트/절곡부 테이블을 추가하려면 먼저 기준 뷰를 추가하십시오."/>
	<label commandName="FusionDocDWGRecoveryDocument" devLabel="The document" translation="문서"/>
	<label commandName="FusionDocDWGRecoveryErrorsFound" devLabel="&lt;b&gt;%1%&lt;/b&gt; has been damaged&lt;br/&gt;&lt;br/&gt;The file has been damaged and may have limited functionality.&lt;br/&gt;&lt;br/&gt;Any corrupt views will be outlined. We suggest deleting and recreating these views. If this does not resolve the issue, we recommend reverting to a previous drawing version by following the steps outlined here:&lt;br/&gt;&lt;br/&gt;&lt;a href=&quot;http://help.autodesk.com/view/NINVFUS/ENU/?guid=GUID-9610E274-6C25-4ED0-809D-35C9068F10BC&quot;&gt;How to Revert to a Previous Version&lt;/a&gt;" translation="&lt;b&gt;%1%&lt;/b&gt;이(가) 손상됨&lt;br/&gt;&lt;br/&gt;파일이 손상되어 기능이 제한될 수 있습니다.&lt;br/&gt;&lt;br/&gt;손상된 뷰에는 외곽선이 표시됩니다. 이러한 뷰는 삭제하고 다시 작성하는 것이 좋습니다. 이렇게 해도 문제가 해결되지 않으면 다음 페이지에서 설명하는 단계에 따라 이전 도면 버전으로 되돌리는 것이 좋습니다.&lt;br/&gt;&lt;br/&gt;&lt;a href=&quot;http://help.autodesk.com/view/NINVFUS/KOR/?guid=GUID-9610E274-6C25-4ED0-809D-35C9068F10BC&quot;&gt;이전 버전으로 되돌리는 방법&lt;/a&gt;"/>
	<label commandName="FusionDocDatumId" devLabel="Datum Identifier" translation="데이텀 식별자"/>
	<label commandName="FusionDocDatumIdEdgeOption" devLabel="Edge" translation="모서리"/>
	<label commandName="FusionDocDatumIdSurfaceOption" devLabel="Surface" translation="곡면"/>
	<label commandName="FusionDocDebugOptionsDescription" devLabel="Preferences that used for easy of debugging drawing" translation="간편한 도면 디버깅에 사용되는 기본 설정"/>
	<label commandName="FusionDocDebugOptionsName" devLabel="Drawing Debug" translation="도면 디버그"/>
	<label commandName="FusionDocDefaultTitleBlock" devLabel="The default title block cannot be edited. Do you want to add a new title block based on this one?" translation="기본 제목 블록을 편집할 수 없습니다. 이 제목 블록을 기준으로 새 제목 블록을 추가하시겠습니까?"/>
	<label commandName="FusionDocDelete" devLabel="Delete" translation="삭제"/>
	<label commandName="FusionDocDeleteConstraint" devLabel="Delete Constraint" translation="구속조건 삭제"/>
	<label commandName="FusionDocDeleteSymbolButton" devLabel="Delete Symbol" translation="기호 삭제"/>
	<label commandName="FusionDocDeleteSymbolTitle" devLabel=" All instances will be deleted" translation=" 모든 인스턴스가 삭제됩니다."/>
	<label commandName="FusionDocDeleteSymbolWarning" devLabel="If you delete this &lt;b&gt;Custom Sketch Symbol,&lt;/b&gt; it will permanently remove all instances from the drawing.&#xA;&#xA; Do you want to delete the symbol ?" translation="이 &lt;b&gt;사용자 설정 스케치 기호&lt;/b&gt;를 삭제하면 도면에서 모든 복제가 영구적으로 제거됩니다.&#xA;&#xA; 기호를 삭제하시겠습니까?"/>
	<label commandName="FusionDocDetailViewCropViewUnsupported" devLabel="Cannot detail a crop view" translation="자르기 뷰는 상세하게 만들 수 없음"/>
	<label commandName="FusionDocDiameterDimension" devLabel="Diameter Dimension" translation="지름 치수"/>
	<label commandName="FusionDocDimReassociate" devLabel="Reassociate" translation="재연관"/>
	<label commandName="FusionDocDimensionBreak" devLabel="Dimension Break" translation="치수 끊기"/>
	<label commandName="FusionDocDimensionEdit" devLabel="Edit Dimension" translation="치수 편집"/>
	<label commandName="FusionDocDimensionProperties1" devLabel="DIMENSION" translation="치수"/>
	<label commandName="FusionDocDisassociatedAnnotations" devLabel="One or more sheets contain disassociated annotations. If you continue, your drawings may contain errors." translation="하나 이상의 시트에 연관해제된 주석이 포함되어 있습니다. 계속하면 도면에 오류가 포함될 수 있습니다."/>
	<label commandName="FusionDocDocumentNotSet" devLabel="Document name is not properly set." translation="문서 이름이 올바르게 설정되지 않았습니다."/>
	<label commandName="FusionDocEdgeExtension" devLabel="Edge Extension" translation="모서리 연장"/>
	<label commandName="FusionDocEditSketchSymbolTitle" devLabel="Custom Sketch Symbol cannot be empty" translation="사용자 설정 스케치 기호는 비워둘 수 없습니다."/>
	<label commandName="FusionDocEditSketchSymbolWarning" devLabel="The &lt;b&gt;Custom Sketch Symbol &lt;/b&gt; contains no object. Add a sketch object to finish the sketch.&lt;br&gt;&lt;br&gt;Click the &lt;b&gt;More (three-dot) menu&lt;/b&gt; next to the symbol to delete and manage the symbol." translation="&lt;b&gt;사용자 설정 스케치 기호&lt;/b&gt;에 객체가 없습니다. 스케치 객체를 추가하여 스케치를 완료하십시오.&lt;br&gt;&lt;br&gt;기호 옆에 있는 &lt;b&gt;자세히(점 3개) 메뉴&lt;/b&gt;를 클릭하여 기호를 삭제하고 관리할 수 있습니다."/>
	<label commandName="FusionDocEgeSymbol" devLabel="Edge Symbol" translation="모서리 기호"/>
	<label commandName="FusionDocEllipse" devLabel="Ellipse" translation="타원"/>
	<label commandName="FusionDocEmptyLeader" devLabel="Leader Note" translation="지시선 주"/>
	<label commandName="FusionDocEmptyTable" devLabel="Custom Table" translation="사용자 테이블"/>
	<label commandName="FusionDocEnableDebugAcCoreConsoleName" devLabel="Enable Debug AcCoreConsole" translation="디버그 AcCoreConsole 사용"/>
	<label commandName="FusionDocEnableDebugAcCoreConsoleToolTip" devLabel="Enable debug AcCoreConsole" translation="디버그 AcCoreConsole 사용"/>
	<label commandName="FusionDocErase" devLabel="Delete" translation="삭제"/>
	<label commandName="FusionDocExtend" devLabel="Extend" translation="연장"/>
	<label commandName="FusionDocFeatureControlFrame" devLabel="Feature Control Frame" translation="형상 공차"/>
	<label commandName="FusionDocFitCmd" devLabel="Fit" translation="맞춤"/>
	<label commandName="FusionDocFitDesc" devLabel="Fit" translation="맞춤"/>
	<label commandName="FusionDocForcePreferredIsoView" devLabel="Force Preferred Isometric View" translation="기본 등각투영 뷰 강제 적용"/>
	<label commandName="FusionDocGcCoincident" devLabel="Coincident" translation="일치"/>
	<label commandName="FusionDocGcCollinear" devLabel="Collinear" translation="동일선상"/>
	<label commandName="FusionDocGcConcentric" devLabel="Concentric" translation="동심"/>
	<label commandName="FusionDocGcEqual" devLabel="Equal" translation="동일"/>
	<label commandName="FusionDocGcFix" devLabel="Fix" translation="고정"/>
	<label commandName="FusionDocGcHorizontal" devLabel="Horizontal" translation="수평"/>
	<label commandName="FusionDocGcParallel" devLabel="Parallel" translation="평행"/>
	<label commandName="FusionDocGcPerpendicular" devLabel="Perpendicular" translation="직각"/>
	<label commandName="FusionDocGcSmooth" devLabel="Smooth" translation="부드럽게"/>
	<label commandName="FusionDocGcSymmetric" devLabel="Symmetric" translation="대칭"/>
	<label commandName="FusionDocGcTangent" devLabel="Tangent" translation="접선"/>
	<label commandName="FusionDocGcVertical" devLabel="Vertical" translation="수직"/>
	<label commandName="FusionDocHasMissingXRefs" devLabel="Fusion Document has missing XRefs" translation="Fusion 문서에 누락된 외부 참조가 있습니다."/>
	<label commandName="FusionDocHatchEdit" devLabel="Edit Hatch" translation="해치 편집"/>
	<label commandName="FusionDocHatchProperties1" devLabel="HATCH" translation="해치"/>
	<label commandName="FusionDocHoleThreadNoteLeader" devLabel="Hole and Thread Note" translation="홀 및 스레드 주"/>
	<label commandName="FusionDocIncludeMeshTip" devLabel="Meshes with more than 500,000 triangles are hidden. Making them visible will take considerable time and may adversely affect performance." translation="삼각형이 50만 개 이상인 메쉬는 숨겨집니다. 메쉬를 보이게 하면 시간이 오래 걸리고 성능에 부정적인 영향을 줄 수 있습니다."/>
	<label commandName="FusionDocIncludeMeshTip2" devLabel="&lt;b&gt;Meshes with more than 500,000 triangles are hidden. Making them visible will take considerable time and may adversely affect performance.&lt;/b&gt;" translation="&lt;b&gt;삼각형이 50만 개 이상인 메쉬는 숨겨집니다. 메쉬를 보이게 하면 시간이 오래 걸리고 성능에 부정적인 영향을 줄 수 있습니다.&lt;/b&gt;"/>
	<label commandName="FusionDocIncompatibleDrawingStd" devLabel="Importing the symbol from a file that uses a different drawing standard may unexpectedly alter dimension values." translation="다른 도면 표준을 사용하는 파일에서 기호를 가져오면 예기치 않게 치수 값이 변경될 수 있습니다."/>
	<label commandName="FusionDocIncompatibleDrawingStdBtnText" devLabel="Import anyway" translation="그래도 가져오기"/>
	<label commandName="FusionDocIncompatibleDrawingStdTitle" devLabel="Incompatible drawing standard" translation="호환되지 않는 도면 표준"/>
	<label commandName="FusionDocInsertTitleBlockFailed" devLabel="Title block insert failed.&lt;br/&gt;For help with preparing DWG files for use as title blocks, see &lt;a href='%1%'&gt;More Information&lt;/a&gt;" translation="제목 블록 삽입에 실패했습니다.&lt;br/&gt;제목 블록으로 사용할 DWG 파일을 준비하는 데 도움이 필요하면 &lt;a href='%1%'&gt;자세한 정보&lt;/a&gt;를 참고하십시오."/>
	<label commandName="FusionDocInsertTitleBlockInvalidObject" devLabel="This DWG file can't be inserted because it contains one or more blocks or xrefs. Remove these objects and try inserting again.&lt;br/&gt;For help with preparing DWG files for use as title blocks, see &lt;a href='%1%'&gt;More Information&lt;/a&gt;" translation="이 DWG 파일은 하나 이상의 블록 또는 외부 참조를 포함하기 때문에 삽입할 수 없습니다. 이러한 객체를 제거하고 다시 삽입해 보십시오.&lt;br/&gt;제목 블록으로 사용하도록 DWG 파일을 준비하는 데 도움이 필요하면 &lt;a href='%1%'&gt;자세한 정보&lt;/a&gt;를 참고하십시오."/>
	<label commandName="FusionDocInsertTitleBlockNameConflict" devLabel="This DWG file can't be inserted because its name conflicts with an existing object. Rename the DWG file and try inserting again.&lt;br/&gt;For help with preparing DWG files for use as title blocks, see &lt;a href='%1%'&gt;More Information&lt;/a&gt;" translation="이 DWG 파일은 이름이 기존 객체와 충돌하기 때문에 삽입할 수 없습니다. DWG 파일의 이름을 바꾸고 다시 삽입해 보십시오.&lt;br/&gt;제목 블록으로 사용하도록 DWG 파일을 준비하는 데 도움이 필요하면 &lt;a href='%1%'&gt;자세한 정보&lt;/a&gt;를 참고하십시오."/>
	<label commandName="FusionDocInsertTitleBlockObjectFiltered" devLabel="This DWG file contains one or more fields, 3D solids, or geolocation points. These objects have been automatically removed from the title block.&lt;br/&gt;For help with preparing DWG files for use as title blocks, see &lt;a href='%1%'&gt;More Information&lt;/a&gt;" translation="이 DWG 파일에는 하나 이상의 필드, 3D 솔리드 또는 지리 위치 점이 포함되어 있습니다. 이러한 객체가 제목 블록에서 자동으로 제거되었습니다.&lt;br/&gt;제목 블록으로 사용하도록 DWG 파일을 준비하는 데 도움이 필요하면 &lt;a href='%1%'&gt;자세한 정보&lt;/a&gt;를 참고하십시오."/>
	<label commandName="FusionDocInvalidFile" devLabel="&lt;b&gt;%1%&lt;/b&gt; has been corrupted&lt;br/&gt;&lt;br/&gt;The file has been corrupted and can no longer be opened by Fusion" translation="&lt;b&gt;%1%&lt;/b&gt;이(가) 손상됨&lt;br/&gt;&lt;br/&gt;파일이 손상되어 더 이상 Fusion에서 열 수 없습니다."/>
	<label commandName="FusionDocLabelDef" devLabel="Label" translation="레이블"/>
	<label commandName="FusionDocLeader" devLabel="Note" translation="주"/>
	<label commandName="FusionDocLegacyTextEdit" devLabel="Legacy Text Edit" translation="기존 텍스트 편집"/>
	<label commandName="FusionDocLine" devLabel="Line" translation="선"/>
	<label commandName="FusionDocLinearDimension" devLabel="Linear Dimension" translation="선형 치수"/>
	<label commandName="FusionDocMText" devLabel="Text" translation="텍스트"/>
	<label commandName="FusionDocMeasure" devLabel="Measure" translation="측정"/>
	<label commandName="FusionDocMinMaxDimensionCmd" devLabel="Curve Min Max Dimension" translation="곡선 최소 최대 치수"/>
	<label commandName="FusionDocModelPropertyEditCommand" devLabel="Edit Model Property" translation="모형 특성 편집"/>
	<label commandName="FusionDocMove" devLabel="Move" translation="이동"/>
	<label commandName="FusionDocMoveDialogTitle" devLabel="MOVE" translation="이동"/>
	<label commandName="FusionDocNewTitleBlock" devLabel="New Title Block" translation="새 제목 블록"/>
	<label commandName="FusionDocOffset" devLabel="Offset" translation="간격띄우기"/>
	<label commandName="FusionDocOnlyConsiderVisibleEdges" devLabel="Only Consider Visible Edges Auto View" translation="가시적 모서리만 고려 자동 뷰"/>
	<label commandName="FusionDocOrdinateDimension" devLabel="Ordinate Dimension" translation="세로좌표 치수"/>
	<label commandName="FusionDocOutdatedSheet" devLabel="The sheet is out of date. Make sure the sheet is up to date and try again." translation="시트가 오래되었습니다. 시트가 최신 상태인지 확인한 후 다시 시도하십시오."/>
	<label commandName="FusionDocOutdatedSheets" devLabel="One or more sheets are out of date. Make sure all sheets are up to date and try again." translation="하나 이상의 시트가 오래되었습니다. 모든 시트가 최신 상태인지 확인한 후 다시 시도하십시오."/>
	<label commandName="FusionDocOverwriteExistingTitleBlock" devLabel="A title block with that name already exists. Do you want to overwrite the existing title block? Overwriting will replace all existing references to this title block in the drawing." translation="해당 이름의 제목 블록이 이미 있습니다. 기존 제목 블록을 덮어쓰시겠습니까? 덮어쓰면 도면의 이 제목 블록에 대한 모든 기존 참조가 대체됩니다."/>
	<label commandName="FusionDocPanCmd" devLabel="Pan" translation="초점이동"/>
	<label commandName="FusionDocPartsListTable" devLabel="Parts List" translation="부품 리스트"/>
	<label commandName="FusionDocPasteCustomMTextCommand" devLabel="Paste" translation="붙여넣기"/>
	<label commandName="FusionDocPasteCustomTableCommand" devLabel="Paste" translation="붙여넣기"/>
	<label commandName="FusionDocPasteDefaultCommand" devLabel="Paste" translation="붙여넣기"/>
	<label commandName="FusionDocPasteExternalCustomTableCommand" devLabel="Paste" translation="붙여넣기"/>
	<label commandName="FusionDocPasteGeomEntityCommand" devLabel="Paste" translation="붙여넣기"/>
	<label commandName="FusionDocPasteSketchCommand" devLabel="Paste" translation="붙여넣기"/>
	<label commandName="FusionDocPasteTextCommand" devLabel="Paste" translation="붙여넣기"/>
	<label commandName="FusionDocRadialDimension" devLabel="Radius Dimension" translation="반지름 치수"/>
	<label commandName="FusionDocRectangle" devLabel="2-Point Rectangle" translation="2점 직사각형"/>
	<label commandName="FusionDocRedo" devLabel="Redo" translation="명령복구"/>
	<label commandName="FusionDocRemoveDimensionBreak" devLabel="Remove Dimension Break" translation="치수 끊기 제거"/>
	<label commandName="FusionDocRenumber" devLabel="Renumber" translation="다시 번호매기기"/>
	<label commandName="FusionDocReservedTitleBlockName" devLabel="The specified name conflicts with an existing Fusion object. Please choose another name." translation="지정한 이름이 기존 Fusion 객체와 충돌합니다. 다른 이름을 선택하십시오."/>
	<label commandName="FusionDocRestoreDefaultsCmd" devLabel="Reset" translation="재설정"/>
	<label commandName="FusionDocRevCloudCommand" devLabel="Revision Cloud" translation="구름형 리비전"/>
	<label commandName="FusionDocRevMarker" devLabel="Revision Marker" translation="리비전 표식기"/>
	<label commandName="FusionDocRevMarkerEdit" devLabel="Revision Marker Edit" translation="리비전 마커 편집"/>
	<label commandName="FusionDocRevisionTable" devLabel="Revision History" translation="리비전 내역"/>
	<label commandName="FusionDocRevisionTableWarning" devLabel="A revision history already exists in the current sheet. Do you want to add a new entry in the revision history?" translation="리비전 내역이 현재 시트에 이미 있습니다. 리비전 내역에 새 항목을 추가하시겠습니까?"/>
	<label commandName="FusionDocRotate" devLabel="Rotate" translation="회전"/>
	<label commandName="FusionDocScreenshotCmd" devLabel="Capture Image" translation="이미지 캡처..."/>
	<label commandName="FusionDocSelfIntersectingCurveUnsupportedCreation" devLabel="Cut profile must be a single closed contour for the breakout section." translation="절단 프로파일은 브레이크 아웃 단면에 대한 단일한 닫힌 윤곽선이어야 합니다."/>
	<label commandName="FusionDocSelfIntersectingCurveUnsupportedEdit" devLabel="Cut profile must be a single closed contour for the breakout section." translation="절단 프로파일은 브레이크 아웃 단면에 대한 단일한 닫힌 윤곽선이어야 합니다."/>
	<label commandName="FusionDocSettingsDelimiterComma" devLabel="Comma" translation="쉼표"/>
	<label commandName="FusionDocSettingsDelimiterDecimal" devLabel="Decimal" translation="마침표"/>
	<label commandName="FusionDocSettinsDelimiter" devLabel="Delimiter" translation="구분자"/>
	<label commandName="FusionDocShowAcCoreConsoleWindowOption" devLabel="Show AcCoreConsole window" translation="AcCoreConsole 창 표시"/>
	<label commandName="FusionDocShowAcCoreConsoleWindowToolTip" devLabel="Show AcCoreConsole window" translation="AcCoreConsole 창 표시"/>
	<label commandName="FusionDocShowHistoryForDesignCommand" devLabel="Design History" translation="디자인 히스토리"/>
	<label commandName="FusionDocShowHistoryForDrawingCommand" devLabel="Drawing History" translation="도면 히스토리"/>
	<label commandName="FusionDocShowHistoryForDrawingToolbarCommand" devLabel="History" translation="히스토리"/>
	<label commandName="FusionDocSingleBodySection" devLabel="Only Single Body Sectional View" translation="단일 바디만 단면 뷰"/>
	<label commandName="FusionDocSingleDimensionCmdDef" devLabel="Dimension" translation="치수"/>
	<label commandName="FusionDocSingleSheetDisassociatedAnnotations" devLabel="Sheet contains disassociated annotations. If you continue, your drawing may contain errors." translation="시트에 연관해제된 주석이 포함되어 있습니다. 계속하면 도면에 오류가 포함될 수 있습니다."/>
	<label commandName="FusionDocSketchCreate" devLabel="Create Sketch" translation="스케치 작성"/>
	<label commandName="FusionDocSourceFileHasBeenMoved" devLabel="Drawing has been moved or copied, would you like to associate it with a new model?" translation="도면이 이동 또는 복사되었습니다. 도면을 새 모형과 연관시키시겠습니까?"/>
	<label commandName="FusionDocSplineBalloon" devLabel="Balloon" translation="품번기호"/>
	<label commandName="FusionDocSurfaceTexture" devLabel="Surface Texture" translation="곡면 텍스처"/>
	<label commandName="FusionDocSymbolEdit" devLabel="Symbol Edit" translation="기호 편집"/>
	<label commandName="FusionDocTBMDeleteApply" devLabel="Select a title block to delete" translation="삭제할 제목 블록 선택"/>
	<label commandName="FusionDocTBMDeleteDefault" devLabel="Select a title block to delete" translation="삭제할 제목 블록 선택"/>
	<label commandName="FusionDocTBMDeleteDefaultMSG" devLabel="Cannot delete default title blocks" translation="기본 제목 블록을 삭제할 수 없음"/>
	<label commandName="FusionDocTBMDeleteMSG" devLabel="Delete Title Block" translation="제목 블록 삭제"/>
	<label commandName="FusionDocTBMDeleteReset" devLabel="Select a title block to delete" translation="삭제할 제목 블록 선택"/>
	<label commandName="FusionDocTBMDeleteSelected" devLabel="Apply to current sheet" translation="현재 시트에 적용"/>
	<label commandName="FusionDocTBMKWD1" devLabel="A title block with that name already exists." translation="해당 이름의 제목 블록이 이미 있습니다."/>
	<label commandName="FusionDocTBMKWD2" devLabel="InvalidTitleBlockRenameNotification" translation="InvalidTitleBlockRenameNotification"/>
	<label commandName="FusionDocTBMKWD3" devLabel="Title block name contains unsupported characters" translation="제목 블록 이름에 지원되지 않는 문자가 있습니다."/>
	<label commandName="FusionDocTBMKWD4" devLabel="Some special characters e.g. '\', ';' etc. are NOT supported." translation="일부 특수 문자(예: '\', ';' 등)는 지원되지 않습니다."/>
	<label commandName="FusionDocTBMKWD5" devLabel="InvalidTitleBlockNameNotification" translation="InvalidTitleBlockNameNotification"/>
	<label commandName="FusionDocTBMRenameApply" devLabel="Select a title block to rename" translation="이름을 바꿀 제목 블록 선택"/>
	<label commandName="FusionDocTBMRenameDefault" devLabel="Select a title block to rename" translation="이름을 바꿀 제목 블록 선택"/>
	<label commandName="FusionDocTBMRenameDefaultMSG" devLabel="Cannot rename default title blocks" translation="기본 제목 블록의 이름을 바꿀 수 없음"/>
	<label commandName="FusionDocTBMRenameMSG" devLabel="Rename Title Block" translation="제목 블록 이름바꾸기"/>
	<label commandName="FusionDocTBMRenameReset" devLabel="Select a title block to rename" translation="이름을 바꿀 제목 블록 선택"/>
	<label commandName="FusionDocTBMSelectRadioButton" devLabel="Apply to current sheet" translation="현재 시트에 적용"/>
	<label commandName="FusionDocTable" devLabel="Table" translation="테이블"/>
	<label commandName="FusionDocTableEdit" devLabel="Table" translation="테이블"/>
	<label commandName="FusionDocTableNoBendInfoInActiveSheetTip" devLabel="The active sheet doesn't contain Bend information" translation="활성 시트에 절곡부 정보가 없습니다."/>
	<label commandName="FusionDocTableNoBendInfoInActiveSheetTip2" devLabel="&lt;b&gt;The active sheet doesn't contain Bend information.&lt;/b&gt;" translation="&lt;b&gt;활성 시트에 절곡부 정보가 없습니다.&lt;/b&gt;"/>
	<label commandName="FusionDocTableNoBendInfoInDesignTip" devLabel="The drawing doesn't contain Bend information" translation="도면에 절곡부 정보가 없습니다."/>
	<label commandName="FusionDocTableNoBendInfoInDesignTip2" devLabel="&lt;b&gt;The drawing doesn't contain Bend information.&lt;/b&gt;" translation="&lt;b&gt;도면에 절곡부 정보가 없습니다.&lt;/b&gt;"/>
	<label commandName="FusionDocTableTextEdit" devLabel="Edit Table Text" translation="테이블 텍스트 편집"/>
	<label commandName="FusionDocTextEdit" devLabel="TEXT PROPERTIES" translation="문자 특성"/>
	<label commandName="FusionDocTitleBlockString" devLabel="Title Block " translation="제목 블록 "/>
	<label commandName="FusionDocTitleBlockWarning1" devLabel=" is currently used on following sheets:&#xA;&#xA;" translation=" 현재 다음 시트에서 사용됨:&#xA;&#xA;"/>
	<label commandName="FusionDocTitleBlockWarning2" devLabel="&#xA;&#xA;Are you sure you want to delete the title block from these sheets?" translation="&#xA;&#xA;이 시트에서 제목 블록을 삭제하시겠습니까?"/>
	<label commandName="FusionDocTrim" devLabel="Trim" translation="자르기"/>
	<label commandName="FusionDocUndo" devLabel="Undo" translation="명령취소"/>
	<label commandName="FusionDocUpdateCommand" devLabel="Get Latest" translation="최신 버전 가져오기"/>
	<label commandName="FusionDocUpdateMessage" devLabel="Changes have been made to a referenced design. &#xA;You can update the drawing from the button in the Application Bar." translation="참조된 설계가 변경되었습니다. &#xA;응용프로그램 막대의 버튼을 사용하여 도면을 업데이트할 수 있습니다."/>
	<label commandName="FusionDocViewAuxiliaryDetailViewUnsupported" devLabel="Cannot create auxiliary projected views of a detail view" translation="상세 뷰의 보조 투영된 뷰를 작성할 수 없습니다."/>
	<label commandName="FusionDocViewAuxiliaryNormalSectionViewUnsupported" devLabel="Cannot create auxiliary view from this section view" translation="이 단면도에서 보조 뷰를 작성할 수 없습니다."/>
	<label commandName="FusionDocViewBreakoutBrokenViewUnsupported" devLabel="You cannot create a breakout section on a Break View and its linked views." translation="파단 뷰 및 거기에 링크된 뷰에서는 브레이크 아웃 단면을 작성할 수 없습니다."/>
	<label commandName="FusionDocViewBreakoutBrokenViewUnsupportedTitle" devLabel="Cannot create breakout section" translation="브레이크 아웃 단면을 작성할 수 없습니다."/>
	<label commandName="FusionDocViewBreakoutOnBreakoutViewUnsupported" devLabel="You can create only one breakout section on a drawing view." translation="도면 뷰에서는 하나의 브레이크 아웃 단면만 작성할 수 있습니다."/>
	<label commandName="FusionDocViewBreakoutOnBreakoutViewUnsupportedTitle" devLabel="View already contains a breakout section" translation="뷰에 이미 브레이크 아웃 단면이 포함되어 있습니다."/>
	<label commandName="FusionDocViewBreakoutOnSectionChildViewsUnsupported" devLabel="You cannot create a breakout section on a drawing view that already contains a section." translation="이미 단면이 포함된 도면 뷰에서는 브레이크 아웃 단면을 작성할 수 없습니다."/>
	<label commandName="FusionDocViewBreakoutOnSectionChildViewsUnsupportedTitle" devLabel="View already contains a section" translation="뷰에 이미 단면이 포함되어 있습니다."/>
	<label commandName="FusionDocViewBreakoutSectionViewUnsupported" devLabel="You cannot create a breakout section on Section Views." translation="단면 뷰에서는 브레이크 아웃 단면을 작성할 수 없습니다."/>
	<label commandName="FusionDocViewBreakoutSectionViewUnsupportedTitle" devLabel="Cannot create breakout section" translation="브레이크 아웃 단면을 작성할 수 없습니다."/>
	<label commandName="FusionDocViewBrokenBreakoutViewUnsupportedTitle" devLabel="Cannot create Break View" translation="파단 뷰를 작성할 수 없습니다."/>
	<label commandName="FusionDocViewDetailDetailViewUnsupported" devLabel="Cannot detail a detail view" translation="상세 뷰를 상세하게 만들 수 없음"/>
	<label commandName="FusionDocViewDetailSectionViewUnsupported" devLabel="Cannot detail a section view" translation="단면도를 상세하게 만들 수 없음"/>
	<label commandName="FusionDocViewProjDetailViewUnsupported" devLabel="Cannot project a detail view" translation="상세 뷰를 투영할 수 없음"/>
	<label commandName="FusionDocViewProjNormalSectionViewUnsupported" devLabel="Cannot project this section view" translation="이 단면도를 투영할 수 없음"/>
	<label commandName="FusionDocViewProjSectionViewUnsupported" devLabel="Cannot project a section view" translation="단면도를 투영할 수 없음"/>
	<label commandName="FusionDocViewRedrawProfileBtnText" devLabel="Redraw Profile" translation="프로파일 다시 그리기"/>
	<label commandName="FusionDocViewSectionDetailViewUnsupported" devLabel="Cannot section a detail view" translation="상세 뷰를 단면으로 만들 수 없음"/>
	<label commandName="FusionDocViewSectionNormalSectionViewUnsupported" devLabel="Cannot section this section view" translation="이 단면도를 단면으로 만들 수 없음"/>
	<label commandName="FusionDocViewSectionSectionViewUnsupported" devLabel="Cannot section a section view" translation="단면도를 단면으로 만들 수 없음"/>
	<label commandName="FusionDocViewSelfIntersectingCurveUnsupportedBreakoutTitle" devLabel="Profile contains multiple closed contours" translation="프로파일에 닫힌 윤곽선이 여러 개 포함되어 있습니다."/>
	<label commandName="FusionDocViewSelfIntersectingCurveUnsupportedTitle" devLabel="Profile contains multiple closed contours" translation="프로파일에 닫힌 윤곽선이 여러 개 포함되어 있습니다."/>
	<label commandName="FusionDocViewUnsupportedTitle" devLabel="Unsupported Drawing View" translation="지원되지 않는 도면 뷰"/>
	<label commandName="FusionDocWaitForDebuggerOption" devLabel="Wait for Debugger" translation="디버거 대기"/>
	<label commandName="FusionDocWaitForDebuggerToolTip" devLabel="Causes AcCoreConsole to pause on startup" translation="AcCoreConsole 때문에 시작 시 일시정지됨"/>
	<label commandName="FusionDocWeldSymbol" devLabel="Welding" translation="용접"/>
	<label commandName="FusionDocZoomCmd" devLabel="Zoom Window" translation="줌 창"/>
	<label commandName="FusionDocumentSettingsACMStandardsGroup" devLabel="Standards" translation="표준"/>
	<label commandName="FusionDocumentSettingsAddIsoViewWithOrthographicViews" devLabel="Add Isometric View" translation="등각투영 뷰 추가"/>
	<label commandName="FusionDocumentSettingsAddIsoViewWithOrthographicViewsDesc" devLabel="Adds an isometric view of your folded model." translation="접힌 모형의 등각투영 뷰를 추가합니다."/>
	<label commandName="FusionDocumentSettingsAltUnitLinearPrecision" devLabel="Linear Precision" translation="선형 정밀도"/>
	<label commandName="FusionDocumentSettingsAltUnitLinearTolPrecision" devLabel="Linear Tolerance Precision" translation="선형 공차 정밀도"/>
	<label commandName="FusionDocumentSettingsAltUnitsDisplatTrailingZeros" devLabel="Trailing Zeros" translation="후행 0"/>
	<label commandName="FusionDocumentSettingsAltUnitsDisplayLeadingZeros" devLabel="Leading Zeros" translation="선행 0"/>
	<label commandName="FusionDocumentSettingsAltUnitsDisplaySuffix" devLabel="Unit Abbreviation" translation="단위 약어"/>
	<label commandName="FusionDocumentSettingsAltUnitsZerosAndUnits" devLabel="Zeros/Units" translation="0/단위"/>
	<label commandName="FusionDocumentSettingsAlternateDimUnit" devLabel="Alternate Units" translation="대체 단위"/>
	<label commandName="FusionDocumentSettingsAlternateDimensionUnits" devLabel="Units" translation="단위"/>
	<label commandName="FusionDocumentSettingsAlternateLinearFormat" devLabel="Format" translation="형식"/>
	<label commandName="FusionDocumentSettingsAnimation" devLabel="Animation" translation="애니메이션"/>
	<label commandName="FusionDocumentSettingsAnimationDesc" devLabel="Creates a sheet for the exploded view from a storyboard created in the Animation workspace." translation="애니메이션 작업공간에서 작성된 스토리보드에서 분해된 뷰에 대한 시트를 작성합니다."/>
	<label commandName="FusionDocumentSettingsAutoArrangeDimension" devLabel="Auto Arrange Dimension" translation="자동 치수 정렬"/>
	<label commandName="FusionDocumentSettingsAutoDimension" devLabel="Auto Dimensions" translation="자동 치수"/>
	<label commandName="FusionDocumentSettingsAutoDimensionDesc" devLabel="Automatically adds dimensions to views." translation="자동으로 치수를 뷰에 추가합니다."/>
	<label commandName="FusionDocumentSettingsAutoDimensionDimensions" devLabel="Auto-Dimension" translation="자동 치수기입"/>
	<label commandName="FusionDocumentSettingsAutoDimensionDimensionsDesc" devLabel="Automatically adds various types of dimensions to a sheet." translation="다양한 유형의 치수를 시트에 자동으로 추가합니다."/>
	<label commandName="FusionDocumentSettingsBendTableDefaultLocation" devLabel="Bend Table Location" translation="절곡부 테이블 위치"/>
	<label commandName="FusionDocumentSettingsBendTableDefaultLocationDesc" devLabel="Specifies the location of the bend table on the sheet." translation="시트에서 절곡부 테이블의 위치를 지정합니다."/>
	<label commandName="FusionDocumentSettingsCircularPatternDimensions" devLabel="Circular Pattern Dimensions" translation="원형 패턴 치수"/>
	<label commandName="FusionDocumentSettingsComponent" devLabel="Component" translation="구성요소"/>
	<label commandName="FusionDocumentSettingsComponentDesc" devLabel="Creates a sheet for this component only." translation="이 구성요소에 대해서만 시트를 작성합니다."/>
	<label commandName="FusionDocumentSettingsDatumIDStandard" devLabel="Datum Identifier" translation="데이텀 식별자"/>
	<label commandName="FusionDocumentSettingsDefaultOrigin" devLabel="Default Origin" translation="기본 원점"/>
	<label commandName="FusionDocumentSettingsDefaultToLowDensityDimension" devLabel="Default To Low Density Dimension" translation="저밀도 치수를 기본값으로 설정"/>
	<label commandName="FusionDocumentSettingsDimensionAssemblies" devLabel="Dimension Assemblies" translation="치수 조립품"/>
	<label commandName="FusionDocumentSettingsDimensionComponents" devLabel="Dimension Components" translation="치수 구성요소"/>
	<label commandName="FusionDocumentSettingsDimensionStrategy" devLabel="Dimension Strategy" translation="치수 전략"/>
	<label commandName="FusionDocumentSettingsDimensionStrategyDesc" devLabel="Controls how dimensions display on the sheet." translation="시트에 치수가 표시되는 방법을 제어합니다."/>
	<label commandName="FusionDocumentSettingsDisplayLineWidthsInput" devLabel="Display Line Widths" translation="선 폭 표시"/>
	<label commandName="FusionDocumentSettingsEdgeSymbolStandard" devLabel="Edge" translation="모서리"/>
	<label commandName="FusionDocumentSettingsFCFStandard" devLabel="Feature Control Frame" translation="형상 공차"/>
	<label commandName="FusionDocumentSettingsFilterComponentsbyGeometry" devLabel="Detect and Omit Fasteners" translation="조임쇠 감지 및 생략"/>
	<label commandName="FusionDocumentSettingsFilterComponentsbyGeometryDesc" devLabel="Omits the fasteners during the automatic drawing creation process." translation="자동 도면 작성 프로세스 중에 조임쇠를 생략합니다."/>
	<label commandName="FusionDocumentSettingsFoldedMetalIsoViewWithOrthoViews" devLabel="Add Folded Model Isometric View" translation="접힌 모형 등각투영 뷰 추가"/>
	<label commandName="FusionDocumentSettingsFoldedMetalIsoViewWithOrthoViewsDesc" devLabel="Adds an isometric view of your folded model." translation="접힌 모형의 등각투영 뷰를 추가합니다."/>
	<label commandName="FusionDocumentSettingsFontInput" devLabel="Font" translation="글꼴"/>
	<label commandName="FusionDocumentSettingsGenerationOption" devLabel="Generation Options" translation="생성 옵션"/>
	<label commandName="FusionDocumentSettingsGroupAnnotateDrawings" devLabel="Annotation Options" translation="주석 옵션"/>
	<label commandName="FusionDocumentSettingsGroupAutomatedDrawingGeneration" devLabel="Automated Drawing Generation" translation="자동 도면 생성"/>
	<label commandName="FusionDocumentSettingsGroupAutomationDimensions" devLabel="Dimensions" translation="치수"/>
	<label commandName="FusionDocumentSettingsGroupAutomationDimensionsDesc" devLabel="Controls the automatic dimensioning." translation="자동 치수기입을 제어합니다."/>
	<label commandName="FusionDocumentSettingsGroupDimensions" devLabel="Units" translation="단위"/>
	<label commandName="FusionDocumentSettingsGroupGenerateSheet" devLabel="Generate Sheet" translation="시트 생성"/>
	<label commandName="FusionDocumentSettingsGroupGenerateSheetDesc" devLabel="Creates sheets for the selected design entities." translation="선택한 디자인 도면요소에 대한 시트를 작성합니다."/>
	<label commandName="FusionDocumentSettingsGroupGlobalOptions" devLabel="Omit Components" translation="구성요소 생략"/>
	<label commandName="FusionDocumentSettingsGroupGlobalOptionsDesc" devLabel="Controls for which components a sheet will not be created." translation="시트를 작성하지 않을 구성요소를 제어합니다."/>
	<label commandName="FusionDocumentSettingsGroupLineWidth" devLabel="Line Widths" translation="선 폭"/>
	<label commandName="FusionDocumentSettingsGroupPerSheetOptions" devLabel="Per Sheet Options" translation="시트당 옵션"/>
	<label commandName="FusionDocumentSettingsGroupRevisionHistory" devLabel="Revision History" translation="리비전 내역"/>
	<label commandName="FusionDocumentSettingsGroupText" devLabel="Text" translation="텍스트"/>
	<label commandName="FusionDocumentSettingsHolePreferences" devLabel="Hole Preferences" translation="홀 기본 설정"/>
	<label commandName="FusionDocumentSettingsHolePreferencesDesc" devLabel="Controls how hole details are displayed in the drawing." translation="도면에 홀 상세 정보가 표시되는 방법을 제어합니다."/>
	<label commandName="FusionDocumentSettingsIncludeBendTable" devLabel="Include Bend Table" translation="절곡부 테이블 포함"/>
	<label commandName="FusionDocumentSettingsIncludeBendTableDesc" devLabel="Adds a bend table with information about each sheet metal bend in a flat pattern reference." translation="플랫 패턴 참조에서 각 판금 절곡부에 대한 정보가 있는 절곡부 테이블을 추가합니다."/>
	<label commandName="FusionDocumentSettingsIncludePartList" devLabel="Include Parts List" translation="부품 리스트 포함"/>
	<label commandName="FusionDocumentSettingsIncludePartListDesc" devLabel="Adds a detailed parts list to the sheet, listing all components in the assembly." translation="시트에 상세 부품 리스트를 추가하여 조립품의 모든 구성요소를 나열합니다."/>
	<label commandName="FusionDocumentSettingsLargeTextHeighCustomtInput" devLabel="Large Text Height" translation="큰 문자 높이"/>
	<label commandName="FusionDocumentSettingsLargeTextHeightInput" devLabel="Large Text Height" translation="큰 문자 높이"/>
	<label commandName="FusionDocumentSettingsLineWidthGroupInput" devLabel="Line Width Group" translation="선 폭 그룹"/>
	<label commandName="FusionDocumentSettingsMainAssemblyGenerateSheet" devLabel="Main Assembly" translation="주 조립품"/>
	<label commandName="FusionDocumentSettingsMainAssemblyGenerateSheetDesc" devLabel="Creates a sheet for the top-level assembly that includes all sub-assemblies and components." translation="모든 부분조립품 및 구성요소를 포함하는 맨 위 단계 조립품에 대한 시트를 작성합니다."/>
	<label commandName="FusionDocumentSettingsMassPrecisionInput" devLabel="Mass precision" translation="질량 정밀도"/>
	<label commandName="FusionDocumentSettingsMassUnitsInput" devLabel="Mass" translation="질량"/>
	<label commandName="FusionDocumentSettingsMediumLineWidthInput" devLabel="Medium Line Width" translation="중간 선 폭"/>
	<label commandName="FusionDocumentSettingsMediumLineWidthInputCustom" devLabel="Medium Line Width" translation="중간 선 폭"/>
	<label commandName="FusionDocumentSettingsMediumTextHeightCustomInput" devLabel="Medium Text Height" translation="중간 문자 높이"/>
	<label commandName="FusionDocumentSettingsMediumTextHeightInput" devLabel="Medium Text Height" translation="중간 문자 높이"/>
	<label commandName="FusionDocumentSettingsPartsListLocation" devLabel="Parts List Location" translation="부품 리스트 위치"/>
	<label commandName="FusionDocumentSettingsPartsListLocationDesc" devLabel="Specifies the location of the parts list on the sheet." translation="시트에서 부품 리스트의 위치를 지정합니다."/>
	<label commandName="FusionDocumentSettingsPrimaryAngularPrecisionInput" devLabel="Angular Precision" translation="각도 정밀도"/>
	<label commandName="FusionDocumentSettingsPrimaryDimensionUnits" devLabel="Units" translation="단위"/>
	<label commandName="FusionDocumentSettingsPrimaryDisplayLeadingZeroInput" devLabel="Leading Zeros" translation="선행 0"/>
	<label commandName="FusionDocumentSettingsPrimaryDisplaySuffixInput" devLabel="Unit Abbreviation" translation="단위 약어"/>
	<label commandName="FusionDocumentSettingsPrimaryDisplayTrailingZeroInput" devLabel="Trailing Zeros" translation="후행 0"/>
	<label commandName="FusionDocumentSettingsPrimaryLinearFormatInput" devLabel="Format" translation="형식"/>
	<label commandName="FusionDocumentSettingsPrimaryLinearPrecisionInput" devLabel="Linear Precision" translation="선형 정밀도"/>
	<label commandName="FusionDocumentSettingsPrimaryLinearTolPrecisionInput" devLabel="Linear Tolerance Precision" translation="선형 공차 정밀도"/>
	<label commandName="FusionDocumentSettingsPrimaryUnitsZerosAndUnits" devLabel="Zeros/Units" translation="0/단위"/>
	<label commandName="FusionDocumentSettingsProjectionAngle" devLabel="Projection Angle" translation="투영 각도"/>
	<label commandName="FusionDocumentSettingsPushToTemplate" devLabel="Push To Template    " translation="템플릿으로 푸시    "/>
	<label commandName="FusionDocumentSettingsRevisionNumberingInput" devLabel="Numbering" translation="번호 매기기"/>
	<label commandName="FusionDocumentSettingsRevisionScopeInput" devLabel="Revision Scope" translation="리비전 범위"/>
	<label commandName="FusionDocumentSettingsSectionLineDisplay" devLabel="Display Section Line" translation="단면 선 표시"/>
	<label commandName="FusionDocumentSettingsSheetMetalFlatPattern" devLabel="Flat Pattern" translation="플랫 패턴"/>
	<label commandName="FusionDocumentSettingsSheetMetalFlatPatternDesc" devLabel="Creates a sheet for the flat pattern view." translation="플랫 패턴 뷰에 대한 시트를 작성합니다."/>
	<label commandName="FusionDocumentSettingsSheetMetalFolded" devLabel="Folded Model" translation="접힌 모형"/>
	<label commandName="FusionDocumentSettingsSheetMetalFoldedDesc" devLabel="Creates a sheet for the folded model view." translation="접힌 모형 뷰에 대한 시트를 작성합니다."/>
	<label commandName="FusionDocumentSettingsSheetType" devLabel="Sheet Type" translation="시트 유형"/>
	<label commandName="FusionDocumentSettingsSheetWithOrthoViews" devLabel="Sheet with Orthogonal Views" translation="직교 뷰가 있는 시트"/>
	<label commandName="FusionDocumentSettingsSheetWithOrthoViewsDesc" devLabel="Displays optimised orthogonal views on the sheet." translation="최적화된 직교 뷰를 시트에 표시합니다."/>
	<label commandName="FusionDocumentSettingsSheetWithSingleISOView" devLabel="Sheet with Single ISO View" translation="단일 ISO 뷰가 있는 시트"/>
	<label commandName="FusionDocumentSettingsSheetWithSingleISOViewDesc" devLabel="Displays a single isometric view on the sheet." translation="시트에 단일 등각투영 뷰를 표시합니다."/>
	<label commandName="FusionDocumentSettingsSmallTextHeightCustomInput" devLabel="Small Text Height" translation="작은 문자 높이"/>
	<label commandName="FusionDocumentSettingsSmallTextHeightInput" devLabel="Small Text Height" translation="작은 문자 높이"/>
	<label commandName="FusionDocumentSettingsSmartTempViewMsg" devLabel="" translation=""/>
	<label commandName="FusionDocumentSettingsStandardStringInput" devLabel="Standard             " translation="표준             "/>
	<label commandName="FusionDocumentSettingsSubAssemblyGenerateSheet" devLabel="Sub-Assembly" translation="부분조립품"/>
	<label commandName="FusionDocumentSettingsSubAssemblyGenerateSheetDesc" devLabel="Creates a sheet for this sub-assembly and its components." translation="이 부분조립품 및 해당 구성요소에 대한 시트를 작성합니다."/>
	<label commandName="FusionDocumentSettingsSurfaceTextureStandard" devLabel="Surface Texture" translation="곡면 텍스처"/>
	<label commandName="FusionDocumentSettingsTaperSlopeStandard" devLabel="Taper and Slope" translation="테이퍼 및 경사도"/>
	<label commandName="FusionDocumentSettingsTextHeightGroupInput" devLabel="Text Height Group" translation="문자 높이 그룹"/>
	<label commandName="FusionDocumentSettingsTextHeightInput" devLabel="Text Height" translation="문자 높이"/>
	<label commandName="FusionDocumentSettingsThickLineWidthInput" devLabel="Thick Line Width" translation="두꺼운 선 폭"/>
	<label commandName="FusionDocumentSettingsThickLineWidthInputCustom" devLabel="Thick Line Width" translation="두꺼운 선 폭"/>
	<label commandName="FusionDocumentSettingsThinLineWidthInput" devLabel="Thin Line Width" translation="가는 선 폭"/>
	<label commandName="FusionDocumentSettingsThinLineWidthInputCustom" devLabel="Thin Line Width" translation="가는 선 폭"/>
	<label commandName="FusionDocumentSettingsUnits" devLabel="Units" translation="단위"/>
	<label commandName="FusionDocumentSettingsWeldingStandard" devLabel="Welding" translation="용접"/>
	<label commandName="FusionDrawingActivateEnvironmentCommand" devLabel="Workspace" translation="작업공간"/>
	<label commandName="FusionDrawingAlignBalloonCommand" devLabel="Align Balloons" translation="품번기호 정렬"/>
	<label commandName="FusionDrawingArcCenterCommandDesc" devLabel="ArcCenter" translation="ArcCenter"/>
	<label commandName="FusionDrawingArcCommandDesc" devLabel="3-Point Arc" translation="3점 호"/>
	<label commandName="FusionDrawingArcTangentCommandDesc" devLabel="ArcTangent" translation="ArcTangent"/>
	<label commandName="FusionDrawingAttDefCommandDesc" devLabel="Attribute" translation="속성"/>
	<label commandName="FusionDrawingAttEditCommandDesc" devLabel="Attribute Definition Edit" translation="속성 정의 편집"/>
	<label commandName="FusionDrawingAttributeCommandDialogTitle1" devLabel="ATTRIBUTE" translation="속성"/>
	<label commandName="FusionDrawingAutoDimensionCommand" devLabel="Auto Dimension" translation="자동 치수"/>
	<label commandName="FusionDrawingAutoDimensionEdit" devLabel="Edit Auto Dimensions" translation="자동 치수 편집"/>
	<label commandName="FusionDrawingBadInstallMessage" devLabel="&lt;b&gt;%1% Drawings cannot launch&lt;/b&gt;&lt;br /&gt;&lt;br /&gt;An installation issue is preventing %1% Drawings from launching. Please follow the uninstall information at the link below and then reinstall in order to create a drawing.&lt;br /&gt;&lt;br /&gt;&lt;a href='https://knowledge.autodesk.com/support/fusion-360/troubleshooting/caas/sfdcarticles/sfdcarticles/How-to-do-an-automatic-Clean-Uninstall-for-Autodesk-Fusion-360.html'&gt;How to uninstall %1%&lt;/a&gt;&lt;br /&gt;&lt;br /&gt;If you have reinstalled and are still encountering this message please contact support and we will respond promptly. Closing this dialog will return you to your design." translation="&lt;b&gt;%1% 도면을 시작할 수 없음&lt;/b&gt;&lt;br /&gt;&lt;br /&gt;설치 문제로 인해 %1% 도면이 시작되지 않습니다. 도면을 작성하기 위해 아래 링크의 설치제거 정보에 따른 다음 도면을 작성하십시오.&lt;br /&gt;&lt;br /&gt;&lt;a href='https://knowledge.autodesk.com/support/fusion-360/troubleshooting/caas/sfdcarticles/sfdcarticles/How-to-do-an-automatic-Clean-Uninstall-for-Autodesk-Fusion-360.html'&gt;%1% 설치제거 방법&lt;/a&gt;&lt;br /&gt;&lt;br /&gt;다시 설치 후에도 이 메시지가 계속 표시되는 경우 지원에 문의하면 신속하게 응답하겠습니다. 이 대화상자를 닫으면 설계로 돌아갑니다."/>
	<label commandName="FusionDrawingBalloonCommandDesc" devLabel="Baloon" translation="품번기호"/>
	<label commandName="FusionDrawingBaseViewPlaceHolder" devLabel="Base View Placeholder" translation="기준 뷰 자리 표시자"/>
	<label commandName="FusionDrawingBlockEditorImageInsert" devLabel="Image" translation="이미지"/>
	<label commandName="FusionDrawingBreakLinkTable" devLabel="Break" translation="끊기"/>
	<label commandName="FusionDrawingBreakoutSectionView" devLabel="Breakout Section View" translation="브레이크 아웃 단면 뷰"/>
	<label commandName="FusionDrawingBreakoutSectionViewEdit" devLabel="Edit Breakout Section View" translation="브레이크 아웃 단면 뷰 편집"/>
	<label commandName="FusionDrawingBrowserSheetName" devLabel="Sheet" translation="시트"/>
	<label commandName="FusionDrawingCentermarkCommandDesc" devLabel="Center Mark" translation="중심 표식"/>
	<label commandName="FusionDrawingCircle2PointCommandDesc" devLabel="Circle2Point" translation="Circle2Point"/>
	<label commandName="FusionDrawingCircle3PointCommandDesc" devLabel="Circle3Point" translation="Circle3Point"/>
	<label commandName="FusionDrawingCircleCommandDesc" devLabel="Center Radius Circle" translation="중심 반지름 원"/>
	<label commandName="FusionDrawingCircleDiameterCommandDesc" devLabel="CircleDiameter" translation="CircleDiameter"/>
	<label commandName="FusionDrawingConfigTable" devLabel="Configuration Table" translation="구성 테이블"/>
	<label commandName="FusionDrawingContentsInput" devLabel="Contents" translation="내용"/>
	<label commandName="FusionDrawingContentsInputDesc" devLabel="Select the contents to include in your drawing." translation="도면에 포함할 컨텐츠를 선택합니다."/>
	<label commandName="FusionDrawingContinue" devLabel="Continue" translation="계속"/>
	<label commandName="FusionDrawingCopyCommandDesc" devLabel="Copy" translation="복사"/>
	<label commandName="FusionDrawingCreatePartsListCommand" devLabel="Parts List" translation="부품 리스트"/>
	<label commandName="FusionDrawingCreateSketchSymbolCmdName" devLabel="Create Sketch Symbol" translation="스케치 기호 작성"/>
	<label commandName="FusionDrawingCustomSheetHeightInput" devLabel="Height" translation="높이"/>
	<label commandName="FusionDrawingCustomSheetWidthInput" devLabel="Width" translation="폭"/>
	<label commandName="FusionDrawingDimensionAlignArrange" devLabel="Align Dimensions" translation="치수 정렬"/>
	<label commandName="FusionDrawingDimensionArrange" devLabel="Arrange Dimensions" translation="치수 배열"/>
	<label commandName="FusionDrawingDimensionStackArrange" devLabel="Stack Dimensions" translation="스택 치수"/>
	<label commandName="FusionDrawingDocumentSettingsCommandDialogTitle" devLabel="Document Settings" translation="문서 설정"/>
	<label commandName="FusionDrawingDrawingBendID" devLabel="Bend Identifier" translation="절곡부 식별자"/>
	<label commandName="FusionDrawingDrawingBlockRefEdit" devLabel="Properties" translation="특성"/>
	<label commandName="FusionDrawingEllipseCommandDesc" devLabel="Ellipse" translation="타원"/>
	<label commandName="FusionDrawingExtendCommandDesc" devLabel="Extend" translation="연장"/>
	<label commandName="FusionDrawingFeatureToggle" devLabel="Feature Toggle..." translation="피쳐 전환..."/>
	<label commandName="FusionDrawingFeatureToggleCommandDesc" devLabel="Feature Toggle" translation="피쳐 전환"/>
	<label commandName="FusionDrawingFlipDimArrow" devLabel="Flip Arrows" translation="화살표 반전"/>
	<label commandName="FusionDrawingFlipDimArrowCntxMenu" devLabel="Flip Arrows" translation="화살표 반전"/>
	<label commandName="FusionDrawingFullAssemblyOption" devLabel="Full Assembly" translation="전체 조립품"/>
	<label commandName="FusionDrawingHoleTable" devLabel="Hole Table" translation="홀 테이블"/>
	<label commandName="FusionDrawingHorizontalZonesInput" devLabel="Horizontal Zones" translation="수평 영역"/>
	<label commandName="FusionDrawingImageEdit" devLabel="Image" translation="이미지"/>
	<label commandName="FusionDrawingImageInsert" devLabel="Insert Image" translation="이미지 삽입"/>
	<label commandName="FusionDrawingInsertSketchSymbolCmdName" devLabel="Insert Sketch Symbol" translation="스케치 기호 삽입"/>
	<label commandName="FusionDrawingJoggedRadiusDimensionCmd" devLabel="Jogged Radial Dimension" translation="꺾어진 반지름 치수"/>
	<label commandName="FusionDrawingLabelDefCommandDesc" devLabel="Label" translation="레이블"/>
	<label commandName="FusionDrawingLeaderCommandDialogTitle" devLabel="NOTE" translation="주"/>
	<label commandName="FusionDrawingLineCommandDesc" devLabel="Line" translation="선"/>
	<label commandName="FusionDrawingMLeaderContentEdit" devLabel="Edit Leader Text" translation="지시선 텍스트 편집"/>
	<label commandName="FusionDrawingMTextCommandDesc" devLabel="Text" translation="텍스트"/>
	<label commandName="FusionDrawingMTextEdit" devLabel="Edit Text" translation="문자 편집"/>
	<label commandName="FusionDrawingManageSketchSymbolCmdName" devLabel="Manage Sketch Symbols" translation="스케치 기호 관리"/>
	<label commandName="FusionDrawingMatchDimCntxMenu" devLabel="Match Dimension" translation="치수 일치"/>
	<label commandName="FusionDrawingMatchDimension" devLabel="Match Dimension" translation="치수 일치"/>
	<label commandName="FusionDrawingMeasureCommandDesc" devLabel="Measure" translation="측정"/>
	<label commandName="FusionDrawingMoveCmdDesc" devLabel="Move" translation="이동"/>
	<label commandName="FusionDrawingMultiSheetDelete" devLabel="Delete Sheets" translation="시트 삭제"/>
	<label commandName="FusionDrawingNewTableCommandDialogTitle" devLabel="TABLE" translation="TABLE"/>
	<label commandName="FusionDrawingNewTableCommandName" devLabel="Table" translation="테이블"/>
	<label commandName="FusionDrawingNewTableTemplateCommandDesc" devLabel="Table Placeholder" translation="테이블 자리 표시자"/>
	<label commandName="FusionDrawingNewTableTemplateCommandName" devLabel="Table Placeholder" translation="테이블 자리 표시자"/>
	<label commandName="FusionDrawingNoteCommand" devLabel="Note" translation="주"/>
	<label commandName="FusionDrawingNumberingCommandDialogTitle1" devLabel="Label" translation="레이블"/>
	<label commandName="FusionDrawingOffsetCommandDesc" devLabel="Offset" translation="간격띄우기"/>
	<label commandName="FusionDrawingPrint" devLabel="Print..." translation="인쇄..."/>
	<label commandName="FusionDrawingPrintCommandDesc" devLabel="Print" translation="인쇄"/>
	<label commandName="FusionDrawingPrintSelectedSheets" devLabel="Print" translation="인쇄"/>
	<label commandName="FusionDrawingPrintSingleSheet" devLabel="Print" translation="인쇄"/>
	<label commandName="FusionDrawingQuickAutoDimensionCommand" devLabel="Quick Auto Dimension" translation="빠른 자동 치수"/>
	<label commandName="FusionDrawingRectangleCommandDesc" devLabel="2-Point Rectangle" translation="2점 직사각형"/>
	<label commandName="FusionDrawingReplaceDimensionWithConfigAspectCmd" devLabel="Replace with Configured Aspect" translation="구성된 측면으로 대체"/>
	<label commandName="FusionDrawingRepresentationFlatPattern" devLabel="Flat Pattern" translation="플랫 패턴"/>
	<label commandName="FusionDrawingRepresentationFoldedModel" devLabel="Folded Model" translation="접힌 모형"/>
	<label commandName="FusionDrawingRepresentationInput" devLabel="Representation" translation="표현"/>
	<label commandName="FusionDrawingRotateCmdDesc" devLabel="Rotate" translation="회전"/>
	<label commandName="FusionDrawingSelectOption" devLabel="Select" translation="선택"/>
	<label commandName="FusionDrawingSheetActivate" devLabel="Activate Sheet" translation="시트 활성화"/>
	<label commandName="FusionDrawingSheetAdd" devLabel="Add Sheet" translation="시트 추가"/>
	<label commandName="FusionDrawingSheetDelete" devLabel="Delete Sheet" translation="시트 삭제"/>
	<label commandName="FusionDrawingSheetDuplicate" devLabel="Duplicate Sheet" translation="시트 복제"/>
	<label commandName="FusionDrawingSheetHeightInput" devLabel="Height" translation="높이"/>
	<label commandName="FusionDrawingSheetNew" devLabel="Quick Add" translation="빠른 추가"/>
	<label commandName="FusionDrawingSheetRename" devLabel="Rename Sheet" translation="시트 이름바꾸기"/>
	<label commandName="FusionDrawingSheetReorder" devLabel="Reorder Sheet" translation="시트 재정리"/>
	<label commandName="FusionDrawingSheetWidthInput" devLabel="Width" translation="폭"/>
	<label commandName="FusionDrawingShowAllChildCommand" devLabel="Show All Components" translation="모든 구성요소 표시"/>
	<label commandName="FusionDrawingShowAllCommand" devLabel="Show All Components" translation="모든 구성요소 표시"/>
	<label commandName="FusionDrawingShowHideCommand" devLabel="Show/Hide" translation="표시/숨기기"/>
	<label commandName="FusionDrawingSingleDimensionCmdDesc" devLabel="Dimension" translation="치수"/>
	<label commandName="FusionDrawingSketchClose" devLabel="Finish Sketch" translation="스케치 마침"/>
	<label commandName="FusionDrawingSketchCloseCommandDesc" devLabel="Finish Sketch" translation="스케치 마침"/>
	<label commandName="FusionDrawingSketchCommandDesc" devLabel="Create Sketch" translation="스케치 작성"/>
	<label commandName="FusionDrawingSketchDelete" devLabel="Delete" translation="삭제"/>
	<label commandName="FusionDrawingSketchEdit" devLabel="Edit Sketch" translation="스케치 편집"/>
	<label commandName="FusionDrawingSketchRename" devLabel="Rename Sketch" translation="스케치 이름바꾸기"/>
	<label commandName="FusionDrawingSketchSymbolClose" devLabel="Finish Sketch Symbol" translation="스케치 기호 완료"/>
	<label commandName="FusionDrawingSketchSymbolCloseCommand" devLabel="Finish Sketch Symbol" translation="스케치 기호 완료"/>
	<label commandName="FusionDrawingSketchSymbolDialogTitle" devLabel="Sketch Symbols" translation="스케치 기호"/>
	<label commandName="FusionDrawingSketchSymbolEdit" devLabel="Edit Sketch Symbol" translation="스케치 기호 편집"/>
	<label commandName="FusionDrawingSketchSymbolLeader" devLabel="Leader Attachment" translation="지시선 부착"/>
	<label commandName="FusionDrawingSketchSymbolLeaderCommand" devLabel="Leader Attachment" translation="지시선 부착"/>
	<label commandName="FusionDrawingSketchSymbolName" devLabel="Sketch Name" translation="스케치 이름"/>
	<label commandName="FusionDrawingSketchSymbolNameCommand" devLabel="Sketch Name" translation="스케치 이름"/>
	<label commandName="FusionDrawingSmartDrawing" devLabel="SmartDrawing" translation="SmartDrawing"/>
	<label commandName="FusionDrawingSmartSheet" devLabel="SmartSheet" translation="SmartSheet"/>
	<label commandName="FusionDrawingSuppressAllExceptSelectedCommand" devLabel="Suppress All Except Selected" translation="선택한 항목을 제외하고 모두 억제"/>
	<label commandName="FusionDrawingSuppressCommand" devLabel="Suppress" translation="억제"/>
	<label commandName="FusionDrawingSuppressUnsuppressCommand" devLabel="Suppress/UnSuppress" translation="억제/억제해제"/>
	<label commandName="FusionDrawingTableCommandDesc" devLabel="Table" translation="테이블"/>
	<label commandName="FusionDrawingTableEditCommandDesc" devLabel="Table Edit" translation="테이블 편집"/>
	<label commandName="FusionDrawingTaperSlopeSymbolCmdName" devLabel="Taper and Slope" translation="테이퍼 및 경사도"/>
	<label commandName="FusionDrawingTemplateImageInsert" devLabel="Insert Image" translation="이미지 삽입"/>
	<label commandName="FusionDrawingTextCommandDialogTitle1" devLabel="TEXT" translation="텍스트"/>
	<label commandName="FusionDrawingTidyUpCommand" devLabel="Tidy Up" translation="정리"/>
	<label commandName="FusionDrawingTitleBlockEdit" devLabel="Edit Title Block" translation="제목 블록 편집"/>
	<label commandName="FusionDrawingTitleBlockProperties1" devLabel="Title Block" translation="제목 블록"/>
	<label commandName="FusionDrawingTrimCommandDesc" devLabel="Trim" translation="자르기"/>
	<label commandName="FusionDrawingUnsuppressAllChildCommand" devLabel="Unsuppress All Components" translation="모든 구성요소 억제해제"/>
	<label commandName="FusionDrawingUnsuppressAllCommand" devLabel="Unsuppress All Components" translation="모든 구성요소 억제해제"/>
	<label commandName="FusionDrawingUnsuppressCommand" devLabel="Unsuppress" translation="억제해제"/>
	<label commandName="FusionDrawingUpdateLinkTable" devLabel="Update" translation="업데이트"/>
	<label commandName="FusionDrawingVaries" devLabel="*Varies" translation="*다양함"/>
	<label commandName="FusionDrawingVerticalZonesInput" devLabel="Vertical Zones" translation="수직 영역"/>
	<label commandName="FusionDrawingView" devLabel="Base View" translation="기준 뷰"/>
	<label commandName="FusionDrawingViewAuxiliaryCommand" devLabel="Auxiliary View" translation="보조 뷰"/>
	<label commandName="FusionDrawingViewBaseTemplateCommandDesc" devLabel="Base View Placeholder" translation="기준 뷰 자리 표시자"/>
	<label commandName="FusionDrawingViewCommandDialogTitle1" devLabel="DRAWING VIEW" translation="도면 뷰"/>
	<label commandName="FusionDrawingViewCommandDialogTitle2" devLabel="PLACEHOLDER VIEW" translation="자리 표시자 뷰"/>
	<label commandName="FusionDrawingViewDetail" devLabel="Detail View" translation="상세 뷰"/>
	<label commandName="FusionDrawingViewEdit" devLabel="Edit View" translation="뷰 편집"/>
	<label commandName="FusionDrawingViewPerspective" devLabel="Perspective View" translation="투시도"/>
	<label commandName="FusionDrawingViewProject" devLabel="Projected View" translation="투영된 뷰"/>
	<label commandName="FusionDrawingViewProjectCommandDesc" devLabel="Projected View" translation="투영된 뷰"/>
	<label commandName="FusionDrawingViewProjectTemplateCommandDesc" devLabel="Projected View Placeholder" translation="투영된 뷰 자리 표시자"/>
	<label commandName="FusionDrawingViewSection" devLabel="Section View" translation="단면도"/>
	<label commandName="FusionDrawingViewSimpleSection" devLabel="Simple Section View" translation="단순 단면도"/>
	<label commandName="FusionDrawingViewTemplateProject" devLabel="Projected View Placeholder" translation="투영된 뷰 자리 표시자"/>
	<label commandName="FusionDrawingVisibleOnlyOption" devLabel="Visible Only" translation="가시적인 항목만"/>
	<label commandName="FusionDrawingsBlockEditorEnv" devLabel="Drawings Block Editor" translation="도면 블록 편집기"/>
	<label commandName="FusionDrawingsSketchEnv" devLabel="Drawings Sketch Editor" translation="도면 스케치 편집기"/>
	<label commandName="FusionDrawingsSketchSymbolEnv" devLabel="Drawings Sketch Symbol Editor" translation="도면 스케치 기호 편집기"/>
	<label commandName="FusionEcadOtherSilkscreenVisibilityCommand" devLabel="Show/Hide" translation="표시/숨기기"/>
	<label commandName="FusionEcadReferenceDesignatorsVisibilityCommand" devLabel="Show/Hide" translation="표시/숨기기"/>
	<label commandName="FusionEcadValuesVisibilityCommand" devLabel="Show/Hide" translation="표시/숨기기"/>
	<label commandName="FusionEditPropertiesCommand" devLabel="Edit Properties" translation="특성 편집"/>
	<label commandName="FusionExportDrawingDXFDocument" devLabel="Export Sheet as DXF" translation="시트를 DXF로 내보내기"/>
	<label commandName="FusionExportDrawingDocument" devLabel="Export DWG" translation="DWG 내보내기"/>
	<label commandName="FusionExportDrawingDocumentCaption" devLabel="Output DWG" translation="출력 DWG"/>
	<label commandName="FusionExportDrawingDocumentDXFCaption" devLabel="Output Sheet as DXF" translation="시트를 DXF로 출력"/>
	<label commandName="FusionExportDrawingTemplate" devLabel="Output Drawing Template" translation="출력 도면 템플릿"/>
	<label commandName="FusionExportPDF" devLabel="Export PDF" translation="PDF 내보내기"/>
	<label commandName="FusionExportPDFCaption" devLabel="Export PDF" translation="PDF 내보내기"/>
	<label commandName="FusionExportPartsList" devLabel="Export CSV" translation="CSV 내보내기"/>
	<label commandName="FusionExportPartsListCaption" devLabel="Output Table" translation="테이블 출력"/>
	<label commandName="FusionGripStretch" devLabel="GripStretch" translation="GripStretch"/>
	<label commandName="FusionHoleTableEdit" devLabel="HOLE TABLE" translation="홀 테이블"/>
	<label commandName="FusionImportDocSettingsCommand" devLabel="Import Document Settings" translation="문서 설정 가져오기"/>
	<label commandName="FusionLayerStackEdit" devLabel="LAYER STACK" translation="도면층 스택"/>
	<label commandName="FusionNewDrawingDocument" devLabel="Create Drawing" translation="도면 작성"/>
	<label commandName="FusionNewDrawingDocumentFromDesign1" devLabel="From Design" translation="설계에서"/>
	<label commandName="FusionNewDrawingTemplate" devLabel="New Drawing Template" translation="새 도면 템플릿"/>
	<label commandName="FusionOriginSymbolEdit" devLabel="ORIGIN" translation="원점"/>
	<label commandName="FusionPartsListEdit" devLabel="PARTS LIST" translation="부품 리스트"/>
	<label commandName="FusionResetPropertiesCommand" devLabel="Reset Properties" translation="특성 재설정"/>
	<label commandName="FusionRevScopeChangeWarning" devLabel="The change of revision scope will cause in removal of all the revision history data from all sheets. Do you want to continue?" translation="리비전 범위를 변경하면 모든 시트에서 모든 리비전 내역 데이터가 제거됩니다. 계속하시겠습니까?"/>
	<label commandName="FusionRevisionTableEdit" devLabel="REVISION HISTORY" translation="리비전 내역"/>
	<label commandName="FusionSheetSettingsDisplayBorderInput" devLabel="Display Border" translation="경계 표시"/>
	<label commandName="FusionSheetSettingsDisplayTitleBlockInput" devLabel="Display Title Block" translation="제목 블록 표시"/>
	<label commandName="FusionSheetSettingsSheetSize" devLabel="Sheet Size" translation="시트 크기"/>
	<label commandName="FusionSheetSettingsTitleBlock" devLabel="Title Block" translation="제목 블록"/>
	<label commandName="FusionSketchHorizontalVerticalCommand" devLabel="Horizontal/Vertical" translation="수평/수직"/>
	<label commandName="FusionSketchSmartConstraintDim" devLabel="Sketch Dimension" translation="스케치 치수"/>
	<label commandName="FusionTitleBlockManagement" devLabel="Title Blocks" translation="제목 블록"/>
	<label commandName="FusionViaPairsEdit" devLabel="VIA PAIRS" translation="VIA 쌍"/>
	<label commandName="GeneralDWG" devLabel="Simplified DWG" translation="단순화된 DWG"/>
	<label commandName="GeneralDXF" devLabel="General DXF" translation="일반 DXF"/>
	<label commandName="GeneralGroup" devLabel="General Settings" translation="일반 설정"/>
	<label commandName="GenerateAnimationSheet" devLabel="animation" translation="애니메이션"/>
	<label commandName="GenerateAssemblySheet" devLabel="assembly" translation="조립품"/>
	<label commandName="GenerateComponentSheet" devLabel="components" translation="구성요소"/>
	<label commandName="GenerateFlatPatternSMSheet" devLabel="flat pattern sheet metal" translation="플랫 패턴 판금"/>
	<label commandName="GenerateFoldedSMSheet" devLabel="folded sheet metal" translation="접힌 판금"/>
	<label commandName="GenerateSubAssemblySheet" devLabel="subassembly" translation="부분조립품"/>
	<label commandName="GettingLatestPIMPropertiesOffline" devLabel="Some properties may be out of date. Go online to get the latest properties." translation="일부 특성은 오래된 버전일 수 있습니다. 최신 특성을 가져오려면 온라인으로 전환하십시오."/>
	<label commandName="GettingLatestPIMPropertiesOnExport" devLabel="Click Refresh to update all properties. This may take some time.&#xA;Click Export to continue without updating properties." translation="모든 특성을 업데이트하려면 갱신을 클릭합니다. 이 작업에는 시간이 걸릴 수 있습니다.&#xA;특성 업데이트 없이 계속하려면 내보내기를 클릭하십시오."/>
	<label commandName="GettingLatestPIMPropertiesOnPrint" devLabel="Click Refresh to update all properties. This may take some time.&#xA;Click Print to continue without updating properties." translation="모든 특성을 업데이트하려면 갱신을 클릭합니다. 이 작업은 시간이 걸릴 수 있습니다.&#xA;특성을 업데이트하지 않고 계속하려면 인쇄를 클릭하십시오."/>
	<label commandName="GroupDestination" devLabel="Destination" translation="대상"/>
	<label commandName="GroupInput" devLabel="Group" translation="그룹"/>
	<label commandName="GroupReference" devLabel="Reference" translation="참조"/>
	<label commandName="HIDDEN" devLabel="HIDDEN" translation="숨김"/>
	<label commandName="HIDDEN2" devLabel="HIDDEN2" translation="숨김2"/>
	<label commandName="HIDDEN_OPTION" devLabel="" translation=""/>
	<label commandName="HIDDEN_OPTION_GROUP" devLabel="" translation=""/>
	<label commandName="HOLE_TABLE_TITLE_BENDTABLE" devLabel="Bend Table" translation="절곡부 테이블"/>
	<label commandName="HOLE_TABLE_TITLE_CONFIGTABLE" devLabel="Configuration Table" translation="구성 테이블"/>
	<label commandName="HOLE_TABLE_TITLE_CUSTOMTABLE" devLabel="Custom Table" translation="사용자 테이블"/>
	<label commandName="HOLE_TABLE_TITLE_HOLETABLE" devLabel="Hole Table" translation="홀 테이블"/>
	<label commandName="HOLE_TABLE_TITLE_LINKTABLE" devLabel="Link Table" translation="링크 테이블"/>
	<label commandName="HOLE_TABLE_TITLE_PARTLIST" devLabel="Part List" translation="부품 리스트"/>
	<label commandName="HOLE_TABLE_TITLE_REVISIONHISTORY" devLabel="Revision History" translation="리비전 내역"/>
	<label commandName="HPDimension" devLabel="Dimension" translation="치수"/>
	<label commandName="HPDimensionDesc" devLabel="Displays hole detail as diameter dimension." translation="홀 상세 정보를 지름 치수로 표시합니다."/>
	<label commandName="HPHoleAndThreadNote" devLabel="Hole and Thread Note" translation="홀 및 스레드 주"/>
	<label commandName="HPHoleAndThreadNoteDesc" devLabel="Displays hole specifications as a detailed note with hole and thread." translation="홀 사양을 홀 및 스레드가 포함된 상세 주로 표시합니다."/>
	<label commandName="HatchColorButton" devLabel="Select Color" translation="색상 선택"/>
	<label commandName="HatchColorInput" devLabel="Color" translation="색상"/>
	<label commandName="HatchDesc" devLabel="Shows the Hatch Object Properties" translation="해치 객체 특성 표시"/>
	<label commandName="HatchEditPropertiesAngle" devLabel="Angle" translation="각도"/>
	<label commandName="HatchEditPropertiesColor" devLabel="Color" translation="색상"/>
	<label commandName="HatchEditPropertiesPattern" devLabel="Pattern" translation="패턴"/>
	<label commandName="HatchEditPropertiesScale" devLabel="Scale Factor" translation="축척 계수"/>
	<label commandName="HatchToolTip" devLabel="Hatch" translation="해치"/>
	<label commandName="Help_Btn" devLabel="HelpButton" translation="HelpButton"/>
	<label commandName="HiddenLinesColorButton" devLabel="Select Color" translation="색상 선택"/>
	<label commandName="HiddenLinesColorInput" devLabel="Color" translation="색상"/>
	<label commandName="HiddenLinesNarrowColorButton" devLabel="Select Color" translation="색상 선택"/>
	<label commandName="HiddenLinesNarrowColorInput" devLabel="Color" translation="색상"/>
	<label commandName="Hole and Thread Note" devLabel="Hole and Thread Note" translation="홀 및 스레드 주"/>
	<label commandName="Hole&amp;ThreadNoteTip" devLabel="Creates a hole and or thread note for the hole or thread edge." translation="홀 또는 스레드 모서리에 대한 홀 및/또는 스레드 주를 작성합니다."/>
	<label commandName="HoleAndThreadNoteGeneratorAlgo" devLabel="Hole And Thread Note Generator Algorithm" translation="홀 및 스레드 주 생성기 알고리즘"/>
	<label commandName="HoleAndThreadNotesColorButton" devLabel="Select Color" translation="색상 선택"/>
	<label commandName="HoleAndThreadNotesColorInput" devLabel="Color" translation="색상"/>
	<label commandName="HoleIdColorButton" devLabel="Select Color" translation="색상 선택"/>
	<label commandName="HoleIdColorInput" devLabel="Color" translation="색상"/>
	<label commandName="HoleTableColorButton" devLabel="Select Color" translation="색상 선택"/>
	<label commandName="HoleTableColorInput" devLabel="Color" translation="색상"/>
	<label commandName="HoleTableOriginColorButton" devLabel="Select Color" translation="색상 선택"/>
	<label commandName="HoleTableOriginColorInput" devLabel="Color" translation="색상"/>
	<label commandName="HoleTableTip" devLabel="Creates a hole table." translation="홀 테이블을 작성합니다."/>
	<label commandName="HorizontalBaseLineDimGenAlgorithm" devLabel="Horizontal Base Line Dim Algorithm" translation="수평 기준선 치수 알고리즘"/>
	<label commandName="HorizontalChainDimGenAlgorithm" devLabel="Horizontal Chain Dim Algorithm" translation="수평 체인 치수 알고리즘"/>
	<label commandName="ImageDistX" devLabel="X Distance" translation="X 거리"/>
	<label commandName="ImageDistY" devLabel="Y Distance" translation="Y 거리"/>
	<label commandName="ImageRotate" devLabel="Rotation Angle" translation="회전 각도"/>
	<label commandName="ImageScale" devLabel="Scale" translation="축척"/>
	<label commandName="ImageSelect" devLabel="Image" translation="이미지"/>
	<label commandName="ImportSymbol" devLabel="Import" translation="가져오기"/>
	<label commandName="ImportSymbolLabel" devLabel="There are no sketch symbols yet. &#xA; Click 'Manage Symbols' to &#xA;create or import symbols" translation="스케치 기호가 아직 없습니다. &#xA; '기호 관리'를 클릭하여 &#xA;기호를 작성하거나 가져오십시오."/>
	<label commandName="ImproveViewQuality" devLabel="Improve View Quality" translation="뷰 품질 개선"/>
	<label commandName="ImproveViewQualityToolTip" devLabel="Improves the render of shaded views, may affect performance." translation="음영처리된 뷰의 렌더가 향상되어 성능에 영향을 줄 수 있습니다."/>
	<label commandName="InfoAttributeType" devLabel="Attribute" translation="속성"/>
	<label commandName="InfoCustomSketchType" devLabel="Type" translation="유형"/>
	<label commandName="InputAutoCMP" devLabel="Auto-complete" translation="자동 완성"/>
	<label commandName="InputCenterMark" devLabel="Center Mark" translation="중심 표식"/>
	<label commandName="InputFullPCD" devLabel="Full PCD" translation="전체 PCD"/>
	<label commandName="InputIsLineweights" devLabel="Lineweights" translation="선가중치"/>
	<label commandName="InputIsOpenPDF" devLabel="Open PDF" translation="PDF 열기"/>
	<label commandName="InputOperation" devLabel="Operation" translation="작업"/>
	<label commandName="InputRange" devLabel="Range" translation="범위"/>
	<label commandName="InputSheets" devLabel="Sheets" translation="시트"/>
	<label commandName="InsertProperty" devLabel="Insert Property" translation="특성 삽입"/>
	<label commandName="InsertSymbols" devLabel="Symbols" translation="기호"/>
	<label commandName="Integral" devLabel=" Integral" translation=" 정수"/>
	<label commandName="InterLoopDimGeneratorAlgo" devLabel="InterLoop Dim Generator Algorithm" translation="루프 간 치수 생성기 알고리즘"/>
	<label commandName="InterViewDimensionFungibleAlgorithm" devLabel="Inter View Dimension Fungible Algorithm" translation="뷰 간 치수 대체 가능 알고리즘"/>
	<label commandName="InterferenceEdges" devLabel="Interference Edges" translation="모서리 간섭"/>
	<label commandName="InterferenceEdgesDesc" devLabel="Displays edges where components intersect." translation="구성요소가 교차하는 모서리를 표시합니다."/>
	<label commandName="InvalidCharacters" devLabel="These characters \&lt;&gt;/?&quot;:;*|,=`$^ are not allowed." translation="\&lt;&gt;/?&quot;:;*|,=`$^ 문자는 사용할 수 없습니다."/>
	<label commandName="InvalidLimit" devLabel="Maximum 30 characters allowed as custom sketch name." translation="사용자 설정 스케치 이름으로 최대 30자까지 허용됩니다."/>
	<label commandName="InvalidNumericValue" devLabel="Please enter a numeric value." translation="숫자 값을 입력하십시오."/>
	<label commandName="InvalidRange" devLabel="Out of Range" translation="범위를 벗어남"/>
	<label commandName="InvalidString" devLabel="Please enter a valid sketch name" translation="적합한 스케치 이름을 입력하십시오."/>
	<label commandName="InvalidUpperLowerValue" devLabel="Upper Limit value should be higher than the Lower Limit value." translation="상한값이 하한값보다 커야 합니다."/>
	<label commandName="Isometric View Preference ASME" devLabel="Isometric View Preference 0TR 1TL 2BL 3BR" translation="등각투영 뷰 기본 설정 0TR 1TL 2BL 3BR"/>
	<label commandName="Isometric View Preference ISO" devLabel="Isometric View Preference 0TR 1TL 2BL 3BR" translation="등각투영 뷰 기본 설정 0TR 1TL 2BL 3BR"/>
	<label commandName="ItemAllSheets" devLabel="All Sheets" translation="모든 시트"/>
	<label commandName="ItemCurrentSheet" devLabel="Current Sheet" translation="현재 시트"/>
	<label commandName="ItemRangeSheets" devLabel="Range" translation="범위"/>
	<label commandName="ItemSelectedSheets" devLabel="Selected Sheets" translation="선택한 시트"/>
	<label commandName="JM Cancel" devLabel="Cancel" translation="취소"/>
	<label commandName="JM Cancelled" devLabel="Cancelled" translation="취소됨"/>
	<label commandName="JM Complete" devLabel="Complete" translation="완료"/>
	<label commandName="JM Failed" devLabel="Failed" translation="실패"/>
	<label commandName="JM Open" devLabel="Open" translation="열기"/>
	<label commandName="JMDrawingAutomation" devLabel="Drawing Automation" translation="도면 자동화"/>
	<label commandName="JMType" devLabel="Type" translation="유형"/>
	<label commandName="JMaction" devLabel="Action" translation="작업"/>
	<label commandName="JMname" devLabel="Name" translation="이름"/>
	<label commandName="JMstatus" devLabel="Status" translation="상태"/>
	<label commandName="Justification" devLabel="Justification" translation="자리맞추기"/>
	<label commandName="JustificationMixed" devLabel="Mixed" translation="혼합"/>
	<label commandName="LAYER_STACK_TABLE_TITLE" devLabel="Layer Stack" translation="도면층 스택"/>
	<label commandName="LINETYPE_PROP" devLabel="Linetype" translation="선종류"/>
	<label commandName="LINEWIDTH_PROP" devLabel="Line Width" translation="선 폭"/>
	<label commandName="LINE_COLOR_CMD_ACTION" devLabel="Color" translation="색상"/>
	<label commandName="LINE_COLOR_EDIT_CMD" devLabel="Color" translation="색상"/>
	<label commandName="LabelAlphaTooltip" devLabel="Adds numeric auto-counter label starting with 1." translation="1부터 시작하는 숫자 자동 카운터 레이블을 추가합니다."/>
	<label commandName="LabelCustomTooltip" devLabel="Adds custom text." translation="사용자 설정 텍스트를 추가합니다."/>
	<label commandName="LabelNumberingAlpha" devLabel="Alpha" translation="알파벳"/>
	<label commandName="LabelNumberingAlphaASME" devLabel="" translation=""/>
	<label commandName="LabelNumberingAlphaISO" devLabel="" translation=""/>
	<label commandName="LabelNumberingCustom" devLabel="Custom" translation="사용자 설정"/>
	<label commandName="LabelNumberingCustomASME" devLabel="" translation=""/>
	<label commandName="LabelNumberingCustomISO" devLabel="" translation=""/>
	<label commandName="LabelNumberingNumeric" devLabel="Numeric" translation="숫자"/>
	<label commandName="LabelNumberingNumericASME" devLabel="" translation=""/>
	<label commandName="LabelNumberingNumericISO" devLabel="" translation=""/>
	<label commandName="LabelNumericTooltip" devLabel="Adds alphabetic auto-counter label starting with A." translation="A로 시작하는 알파벳 자동 카운터 레이블을 추가합니다."/>
	<label commandName="LastLevel" devLabel="Last Level" translation="마지막 단계"/>
	<label commandName="LatestMilestoneLabelStr" devLabel=" (latest milestone)" translation=" (최신 이정표)"/>
	<label commandName="LatestVersionLabelStr" devLabel=" (latest version)" translation=" (최신 버전)"/>
	<label commandName="LayerStackTableCmd" devLabel="Layer Stack Table" translation="도면층 스택 테이블"/>
	<label commandName="LayerStackTableTip" devLabel="Creates layer stack table." translation="도면층 스택 테이블을 작성합니다."/>
	<label commandName="LayerStackViewNewDescription1" devLabel="Layer Stack View is not available when there is no linked Electronics Design." translation="링크된 전자 제품 디자인이 없으면 도면층 스택 뷰를 사용할 수 없습니다."/>
	<label commandName="LayerStackViewNewDescription2" devLabel="To use electronics data in a drawing, first link the 3D PCB to an Electronics Design, then create a drawing." translation="도면에서 전자 제품 데이터를 사용하려면 먼저 3D PCB를 전자 제품 디자인에 링크한 다음, 도면을 작성합니다."/>
	<label commandName="LayerStackViewSuffix" devLabel=" (unavailable)" translation=" (사용할 수 없음)"/>
	<label commandName="Leader Note" devLabel="Leader Note" translation="지시선 주"/>
	<label commandName="LeaderAttachment" devLabel="Leader Attachment" translation="지시선 부착"/>
	<label commandName="LeaderNotesColorButton" devLabel="Select Color" translation="색상 선택"/>
	<label commandName="LeaderNotesColorInput" devLabel="Color" translation="색상"/>
	<label commandName="LeaderSelectButton" devLabel="Select" translation="선택"/>
	<label commandName="LeaderTypeCenter" devLabel="Center" translation="중심"/>
	<label commandName="LeaderTypeDefault" devLabel="Default" translation="기본값"/>
	<label commandName="Left" devLabel="Left" translation="왼쪽"/>
	<label commandName="Lettering" devLabel="Lettering" translation="글자로 번호매기기"/>
	<label commandName="LimitLower" devLabel="Limit" translation="제한"/>
	<label commandName="LimitUpper" devLabel="Limit" translation="제한"/>
	<label commandName="LineColor" devLabel="Select Color" translation="색상 선택"/>
	<label commandName="LineTypeCenter" devLabel="Center" translation="중심"/>
	<label commandName="LineTypeCenter2" devLabel="Center2" translation="Center2"/>
	<label commandName="LineTypeContinuous" devLabel="Continuous" translation="연속"/>
	<label commandName="LineTypeHidden" devLabel="Hidden" translation="숨김"/>
	<label commandName="LineTypeHidden2" devLabel="Hidden2" translation="숨김2"/>
	<label commandName="LineTypePhantom2" devLabel="Phantom2" translation="가상선2"/>
	<label commandName="LineTypeScale" devLabel="Line Type Scale" translation="선 유형 축척"/>
	<label commandName="LineWeight_0.0" devLabel="0.0mm" translation="0.0mm"/>
	<label commandName="LineWeight_0.18" devLabel="0.18mm" translation="0.18mm"/>
	<label commandName="LineWeight_0.25" devLabel="0.25mm" translation="0.25mm"/>
	<label commandName="LineWeight_0.3" devLabel="0.3mm" translation="0.3mm"/>
	<label commandName="LineWeight_0.35" devLabel="0.35mm" translation="0.35mm"/>
	<label commandName="LineWeight_0.5" devLabel="0.5mm" translation="0.5mm"/>
	<label commandName="LineWeight_0.6" devLabel="0.6mm" translation="0.6mm"/>
	<label commandName="LineWeight_0.7" devLabel="0.7mm" translation="0.7mm"/>
	<label commandName="LineWeight_0.8" devLabel="0.8mm" translation="0.8mm"/>
	<label commandName="LineWeight_1.0" devLabel="1.0mm" translation="1.0mm"/>
	<label commandName="LineWeight_1.4" devLabel="1.4mm" translation="1.4mm"/>
	<label commandName="LineWeight_1.58" devLabel="1.58mm" translation="1.58mm"/>
	<label commandName="LineWeight_2.0" devLabel="2.0mm" translation="2.0mm"/>
	<label commandName="LineWidth_Custom" devLabel="Custom" translation="사용자화"/>
	<label commandName="LinearUnitFormat0" devLabel="Decimal" translation="마침표"/>
	<label commandName="LinearUnitFormat1" devLabel="Fractional" translation="분수"/>
	<label commandName="LinearUnitFormat2" devLabel="Engineering" translation="엔지니어링"/>
	<label commandName="LinearUnitFormat3" devLabel="Architectural" translation="건축"/>
	<label commandName="LinkTableTip" devLabel="Creates a link table for the selected external source file." translation="선택한 외부 소스 파일에 대한 링크 테이블을 작성합니다."/>
	<label commandName="LoopSymmetryGeneratorAlgorithm" devLabel="Loop Symmetry Generator Algorithm" translation="루프 대칭 생성기 알고리즘"/>
	<label commandName="LowerLimit" devLabel="Lower Limit" translation="하한"/>
	<label commandName="MDGoTo" devLabel="Show in Location" translation="위치에 표시"/>
	<label commandName="MainASMGroup" devLabel="Main Assembly" translation="주 조립품"/>
	<label commandName="MainASMISOGroup" devLabel="Main Assembly ISO" translation="주 조립품 ISO"/>
	<label commandName="MainASMOrthoGroup" devLabel="Main Assembly Ortho" translation="주 조립품 직교"/>
	<label commandName="MainASMSheetCreate" devLabel="Create Main Assembly" translation="주 조립품 작성"/>
	<label commandName="MainAsmISOPartList" devLabel="Include Parts List" translation="부품 리스트 포함"/>
	<label commandName="MainAsmOrthoPartList" devLabel="Include Parts List" translation="부품 리스트 포함"/>
	<label commandName="MainAsmOrthoPartListLocation" devLabel="Default Parts List Location" translation="기본 부품 리스트 위치"/>
	<label commandName="MainAsmSheetOrthoViesw" devLabel="Sheet with Ortho Views" translation="직교 뷰가 있는 시트"/>
	<label commandName="MainAsmSheetPartListLocation" devLabel="Default Parts List Location" translation="기본 부품 리스트 위치"/>
	<label commandName="MainAsmSheetSingleISOView" devLabel="Sheet with Single ISO View" translation="단일 ISO 뷰가 있는 시트"/>
	<label commandName="MainDashboard" devLabel="Data Panel" translation="데이터 패널"/>
	<label commandName="MajoritySymbolFullType" devLabel="Full List" translation="전체 리스트"/>
	<label commandName="MajoritySymbolSimplifiedType" devLabel="Simplified List" translation="단순화된 리스트"/>
	<label commandName="MajoritySymbolTypeInput" devLabel="Majority Symbol Types" translation="주요 기호 유형"/>
	<label commandName="ManageExtRefreshCmd" devLabel="Refresh" translation="새로 고침"/>
	<label commandName="ManageSymbols" devLabel="Manage Symbols" translation="기호 관리"/>
	<label commandName="Manual" devLabel="Manual" translation="수동"/>
	<label commandName="MassPrecisionInput" devLabel="Mass precision" translation="질량 정밀도"/>
	<label commandName="MassPropertyInputUnits" devLabel="Units" translation="단위"/>
	<label commandName="MassUnitInput" devLabel="Mass" translation="질량"/>
	<label commandName="MaterializedBom" devLabel="Bill of Materials" translation="BOM"/>
	<label commandName="MaxBodiesToDimension" devLabel="Max Bodies To Dimension" translation="치수기입할 최대 바디"/>
	<label commandName="MaxNumberOfDims" devLabel="Max Number of Dimensions" translation="최대 치수 개수"/>
	<label commandName="Medium" devLabel="Medium" translation="중간"/>
	<label commandName="Medium_Linewidth" devLabel="(Medium)" translation="(중간)"/>
	<label commandName="MilestoneButCanUpdateStr" devLabel="Drawing is up to date; it's referencing the latest milestone of the design." translation="도면이 최신 버전이고 설계의 최신 이정표를 참조합니다."/>
	<label commandName="MilestoneButCanUpdateStr_ccy" devLabel="Drawing is up to date; it's referencing the latest version of the design." translation="도면이 최신 상태이며 최신 버전의 디자인을 참조하고 있습니다."/>
	<label commandName="MilestoneNonTipStr_ccy" devLabel="Drawing is referencing a design which has more changes past this version" translation="도면이 이 버전 이후에 더 많은 변경 사항이 있는 디자인을 참조합니다."/>
	<label commandName="MilestoneReferenceLabelStr" devLabel="Reference/s: " translation="참조: "/>
	<label commandName="MinLeaderLength_ASME" devLabel="Minimum Leader Length" translation="최소 지시선 길이"/>
	<label commandName="MinLeaderLength_ISO" devLabel="Minimum Leader Length" translation="최소 지시선 길이"/>
	<label commandName="MinMovementForArrangeAnnotation" devLabel="Minimum Movement For Arrange Annotation" translation="주석 정렬을 위한 최소 이동"/>
	<label commandName="ModelReprensentation" devLabel="Model" translation="모형"/>
	<label commandName="ModelSketchesColorButton" devLabel="Select Color" translation="색상 선택"/>
	<label commandName="ModelSketchesColorInput" devLabel="Color" translation="색상"/>
	<label commandName="MoveDimsWithNoCommonEdgeAndDifferentZToYellowZone" devLabel="Move Dims With No Common Edge And DifferentZ To YellowZone" translation="공통 모서리 및 다른 Z를 제외한 치수를 노란색 영역으로 이동"/>
	<label commandName="MoveRadialDimsWithSmallArcLengthAndAngleToYellowZoneAlgo" devLabel="Move Radial Dims With Small Arc Length And Angle To Yellow Zone" translation="작은 호 길이 및 각도를 포함하는 반지름 치수를 노란색 영역으로 이동"/>
	<label commandName="MoveTransformPtPtTooltip" devLabel="Point to Point" translation="점 대 점"/>
	<label commandName="NE Isometric" devLabel="NE Isometric" translation="북동 등각투영"/>
	<label commandName="NW Isometric" devLabel="NW Isometric" translation="북서 등각투영"/>
	<label commandName="Name" devLabel="Name" translation="이름"/>
	<label commandName="NameColumn" devLabel="Name" translation="이름"/>
	<label commandName="Narrow" devLabel="Narrow" translation="좁은"/>
	<label commandName="New Drawing Template Restricted Message" devLabel="Use templates to standardize the creation of drawings so that you can save time and ensure consistency." translation="템플릿을 사용하여 시간을 절약하고 일관성을 유지할 수 있도록 도면 작성을 표준화합니다."/>
	<label commandName="New Drawing Template Restricted Title" devLabel="New Drawing Template" translation="새 도면 템플릿"/>
	<label commandName="NewDrawingDialogTitle" devLabel="CREATE DRAWING" translation="도면 작성"/>
	<label commandName="NewDrawingMenuCommand" devLabel="New Drawing" translation="새 도면"/>
	<label commandName="NewDrawingSheetCreationAllLevel" devLabel="All Level" translation="모든 단계"/>
	<label commandName="NewDrawingSheetCreationAllLevelDesc" devLabel="Creates a sheet for each design component across all levels." translation="모든 수준에서 각 디자인 구성요소에 대한 시트를 작성합니다."/>
	<label commandName="NewDrawingSheetCreationFirstLevel" devLabel="First Level" translation="첫 번째 단계"/>
	<label commandName="NewDrawingSheetCreationFirstLevelDesc" devLabel="Creates sheets only for first-level components." translation="첫 번째 단계 구성요소에 대해서만 시트를 작성합니다."/>
	<label commandName="NewDrawingSheetCreationStructure" devLabel="Sheet Creation" translation="시트 작성"/>
	<label commandName="NewDrawingSheetCreationStructureDesc" devLabel="Controls the level of detail for drawing sheet creation." translation="도면 시트 작성을 위한 상세 수준을 조정합니다."/>
	<label commandName="NewDrawingTemplateDialogTitle" devLabel="Create Drawing Template" translation="도면 템플릿 작성"/>
	<label commandName="NewECADDrawingDialogTitle" devLabel="CREATE DRAWING" translation="도면 작성"/>
	<label commandName="NewECADTableTitle" devLabel="Title" translation="제목"/>
	<label commandName="NewFusionDrawingAnnotationUnitsInput" devLabel="Units" translation="단위"/>
	<label commandName="NewFusionDrawingBaseDocumentInput" devLabel="Base Document" translation="기본 문서"/>
	<label commandName="NewFusionDrawingComponentsInput" devLabel="Components" translation="구성요소"/>
	<label commandName="NewFusionDrawingFormatANSIInput" devLabel="" translation=""/>
	<label commandName="NewFusionDrawingFormatISOInput" devLabel="" translation=""/>
	<label commandName="NewFusionDrawingFormatInput" devLabel="Standard" translation="표준"/>
	<label commandName="NewFusionDrawingSheetOrientationInput" devLabel="Orientation" translation="방향"/>
	<label commandName="NewFusionDrawingSheetSizeInput" devLabel="Sheet Size" translation="시트 크기"/>
	<label commandName="NewFusionDrawingTemplatePath" devLabel="Path" translation="경로"/>
	<label commandName="NewFusionDrawingUnitsInchesInput" devLabel="in" translation="인치"/>
	<label commandName="NewFusionDrawingUnitsMillimetersInput" devLabel="mm" translation="mm"/>
	<label commandName="NewOrExistingDrawingInput" devLabel="Drawing" translation="도면"/>
	<label commandName="NewPCBTableInput" devLabel="PCB" translation="PCB"/>
	<label commandName="NewPCBViewInput" devLabel="PCB" translation="PCB"/>
	<label commandName="NewTableHoleArrange" devLabel="Arrange" translation="정렬"/>
	<label commandName="NewTableHoleArrangeByPosition" devLabel="by Position" translation="위치별"/>
	<label commandName="NewTableHoleArrangeBySize" devLabel="by Size" translation="크기별"/>
	<label commandName="NewTableHoleOriginStyle" devLabel="Style" translation="스타일"/>
	<label commandName="NewTableHoleTitle" devLabel="Title" translation="제목"/>
	<label commandName="NewTableHoleVisible" devLabel="Visible" translation="표시"/>
	<label commandName="NewTableReferenceEmptyTable" devLabel="Empty Table" translation="빈 테이블"/>
	<label commandName="NewTableReferenceInput" devLabel="Reference" translation="참조"/>
	<label commandName="NewTableReferenceSelectView" devLabel="Select Drawing View" translation="도면 뷰 선택"/>
	<label commandName="NewTableTableInput" devLabel="Table" translation="테이블"/>
	<label commandName="NewTableTitle" devLabel="Title" translation="제목"/>
	<label commandName="NewTableTypeInput" devLabel="Type" translation="유형"/>
	<label commandName="NewTableViewHoleOriginSelectionInput" devLabel="Origin" translation="원점"/>
	<label commandName="NewTableViewSelectionInput" devLabel="Select" translation="선택"/>
	<label commandName="No" devLabel="No" translation="아니오"/>
	<label commandName="NoAutomationJobsJobs" devLabel="There are no drawing automation jobs." translation="도면 자동화 작업이 없습니다."/>
	<label commandName="NoBodyOrSketchForDrawing" devLabel="The design contains neither solid bodies nor sketches. A drawing cannot be created." translation="설계에 솔리드 본체도 스케치도 포함되어 있지 않습니다. 도면을 작성할 수 없습니다."/>
	<label commandName="NoCustomSketchSymbolsFound" devLabel="No Custom Sketch Symbols found" translation="사용자 설정 스케치 기호를 찾을 수 없습니다."/>
	<label commandName="NoCustomSketchSymbolsToImport" devLabel="The selected file does not contain any custom sketch symbols.&#xA;Please choose a different file that includes at least one sketch symbol to import." translation="선택한 파일에 사용자 설정 스케치 기호가 포함되어 있지 않습니다.&#xA;가져올 스케치 기호가 하나 이상 포함된 다른 파일을 선택하십시오."/>
	<label commandName="NoMeshOrTSplineWillBeIncluded" devLabel="T-Spline bodies will not be included in the drawing." translation="T-Spline 바디는 도면에 포함되지 않습니다."/>
	<label commandName="NoPartsListOrTableForExportWarning" devLabel="This sheet has no table." translation="이 시트에 테이블이 없습니다."/>
	<label commandName="NoSymbolLabel" devLabel="There are no sketch symbols yet.&#xA; Click the add icon to create a new symbol, &#xA; or use the import icon to insert one." translation="스케치 기호가 아직 없습니다.&#xA; 추가 아이콘을 클릭하여 새 기호를 작성하거나,&#xA; 가져오기 아이콘을 사용하여 기호를 삽입하십시오."/>
	<label commandName="None" devLabel=" None" translation=" 없음"/>
	<label commandName="Numbering" devLabel="Numbering" translation="번호 매기기"/>
	<label commandName="OALRefreshDrawingMessage" devLabel="Refreshes the canvas with changes that have been made elsewhere in Fusion to this drawing or its references." translation="Fusion의 다른 위치에서 이 도면 또는 해당 참조에 적용된 변경 사항으로 캔버스를 새로 고칩니다."/>
	<label commandName="OKButton" devLabel="OK" translation="확인"/>
	<label commandName="OKButtonCaption" devLabel="OK" translation="확인"/>
	<label commandName="ObjectPropertiesAllDimensionArrowheadInput" devLabel="Arrowhead" translation="화살촉"/>
	<label commandName="ObjectPropertiesAllDimensionLineTypeGroupInput" devLabel="Line Type" translation="선종류"/>
	<label commandName="ObjectPropertiesAllDimensionLineWeightGroup" devLabel="Line Width" translation="선 폭"/>
	<label commandName="ObjectPropertiesBalloonsArrowheadInput" devLabel="Arrowhead" translation="화살촉"/>
	<label commandName="ObjectPropertiesBalloonsLineWeightInput" devLabel="Line Width" translation="선 폭"/>
	<label commandName="ObjectPropertiesBendCenterLineTypeInput" devLabel="Line Type" translation="선종류"/>
	<label commandName="ObjectPropertiesBendCenterLineWeightInput" devLabel="Line Width" translation="선 폭"/>
	<label commandName="ObjectPropertiesBendIdArrowheadInput" devLabel="Arrowhead" translation="화살촉"/>
	<label commandName="ObjectPropertiesBendNoteArrowheadInput" devLabel="Arrowhead" translation="화살촉"/>
	<label commandName="ObjectPropertiesBendNotesLineWeightGroup" devLabel="Line Width" translation="선 폭"/>
	<label commandName="ObjectPropertiesBendTableLineWeightInput" devLabel="Line Width" translation="선 폭"/>
	<label commandName="ObjectPropertiesBrokenViewBreaksLineWeightInput" devLabel="Line Width" translation="선 폭"/>
	<label commandName="ObjectPropertiesCenterLinesLineTypeInput" devLabel="Line Type" translation="선종류"/>
	<label commandName="ObjectPropertiesCenterLinesLineWeightInput" devLabel="Line Width" translation="선 폭"/>
	<label commandName="ObjectPropertiesConfigTableLineWeightInput" devLabel="Line Width" translation="선 폭"/>
	<label commandName="ObjectPropertiesCropViewOutlineTypeInput" devLabel="Type" translation="유형"/>
	<label commandName="ObjectPropertiesCropViewOutlineWeightInput" devLabel="Line Width" translation="선 폭"/>
	<label commandName="ObjectPropertiesCustomTablesLineWeightInput" devLabel="Line Width" translation="선 폭"/>
	<label commandName="ObjectPropertiesDetailBoundariesLineTypeInput" devLabel="Line Type" translation="선종류"/>
	<label commandName="ObjectPropertiesDetailBoundariesLineWeightInput" devLabel="Line Width" translation="선 폭"/>
	<label commandName="ObjectPropertiesEdgeExtensionLineTypeInput" devLabel="Line Type" translation="선종류"/>
	<label commandName="ObjectPropertiesEdgeExtensionLineWeightGroup" devLabel="Line Width" translation="선 폭"/>
	<label commandName="ObjectPropertiesGroupDimensions" devLabel="Dimensions" translation="치수"/>
	<label commandName="ObjectPropertiesGroupGeneral" devLabel="General" translation="일반"/>
	<label commandName="ObjectPropertiesGroupHatch" devLabel="Hatch" translation="해치"/>
	<label commandName="ObjectPropertiesGroupLabels" devLabel="Labels" translation="레이블"/>
	<label commandName="ObjectPropertiesGroupMoreOptions" devLabel="More Options" translation="많은 옵션"/>
	<label commandName="ObjectPropertiesGroupNotes" devLabel="Notes" translation="주"/>
	<label commandName="ObjectPropertiesGroupSketches" devLabel="Sketches" translation="스케치"/>
	<label commandName="ObjectPropertiesHatchLineWeightInput" devLabel="Line Width" translation="선 폭"/>
	<label commandName="ObjectPropertiesHiddenLinesLineTypeInput" devLabel="Line Type" translation="선종류"/>
	<label commandName="ObjectPropertiesHiddenLinesLineWeightInput" devLabel="Line Width" translation="선 폭"/>
	<label commandName="ObjectPropertiesHiddenLinesNarrowLineTypeInput" devLabel="Line Type" translation="선종류"/>
	<label commandName="ObjectPropertiesHiddenLinesNarrowLineWeightInput" devLabel="Line Width" translation="선 폭"/>
	<label commandName="ObjectPropertiesHoleAndThreadNoteArrowheadInput" devLabel="Arrowhead" translation="화살촉"/>
	<label commandName="ObjectPropertiesHoleAndThreadNotesLineWeightGroup" devLabel="Line Width" translation="선 폭"/>
	<label commandName="ObjectPropertiesHoleIdArrowheadInput" devLabel="Arrowhead" translation="화살촉"/>
	<label commandName="ObjectPropertiesHoleTableLineWeightInput" devLabel="Line Width" translation="선 폭"/>
	<label commandName="ObjectPropertiesHoleTableOriginLineWeightInput" devLabel="Line Width" translation="선 폭"/>
	<label commandName="ObjectPropertiesLeaderNoteArrowheadInput" devLabel="Arrowhead" translation="화살촉"/>
	<label commandName="ObjectPropertiesLeaderNotesLineWeightGroup" devLabel="Line Width" translation="선 폭"/>
	<label commandName="ObjectPropertiesModelSketchesLineTypeInput" devLabel="Line Type" translation="선종류"/>
	<label commandName="ObjectPropertiesModelSketchesLineWeightInput" devLabel="Line Width" translation="선 폭"/>
	<label commandName="ObjectPropertiesPartsListLineWeightInput" devLabel="Line Width" translation="선 폭"/>
	<label commandName="ObjectPropertiesRevisionCloudLineTypeInput" devLabel="Line Type" translation="선종류"/>
	<label commandName="ObjectPropertiesRevisionCloudLineWeightInput" devLabel="Line Width" translation="선 폭"/>
	<label commandName="ObjectPropertiesRevisionHistoryTableLineWeightInput" devLabel="Line Width" translation="선 폭"/>
	<label commandName="ObjectPropertiesRevisionMarkerArrowheadInput" devLabel="Arrowhead" translation="화살촉"/>
	<label commandName="ObjectPropertiesRevisionMarkerLineWeightInput" devLabel="Line Width" translation="선 폭"/>
	<label commandName="ObjectPropertiesSectionLinesLineTypeInput" devLabel="Line Type" translation="선종류"/>
	<label commandName="ObjectPropertiesSectionLinesLineWeightInput" devLabel="Line Width" translation="선 폭"/>
	<label commandName="ObjectPropertiesSubgroupAllDimensions" devLabel="All Dimensions" translation="모든 치수"/>
	<label commandName="ObjectPropertiesSubgroupBalloons" devLabel="Balloons" translation="품번기호"/>
	<label commandName="ObjectPropertiesSubgroupBendCenters" devLabel="Bend Centers" translation="절곡부 중심"/>
	<label commandName="ObjectPropertiesSubgroupBendId" devLabel="Bend IDs" translation="절곡부 ID"/>
	<label commandName="ObjectPropertiesSubgroupBendNotes" devLabel="Bend Notes" translation="절곡부 주"/>
	<label commandName="ObjectPropertiesSubgroupBendTable" devLabel="Bend Table" translation="절곡부 테이블"/>
	<label commandName="ObjectPropertiesSubgroupBrokenViewBreaks" devLabel="Broken View Breaks" translation="파단 뷰 끊기"/>
	<label commandName="ObjectPropertiesSubgroupCenterLinesAndMarks" devLabel="Center Lines and Marks" translation="중심선 및 표식"/>
	<label commandName="ObjectPropertiesSubgroupConfigTable" devLabel="Configuration Table" translation="구성 테이블"/>
	<label commandName="ObjectPropertiesSubgroupCropViewOutline" devLabel="Crop View Outline" translation="자르기 뷰 외곽선"/>
	<label commandName="ObjectPropertiesSubgroupCustomTables" devLabel="Custom Tables" translation="사용자 테이블"/>
	<label commandName="ObjectPropertiesSubgroupDetailBoundaries" devLabel="Detail Boundaries" translation="상세 경계"/>
	<label commandName="ObjectPropertiesSubgroupEdgeExtensions" devLabel="Edge Extensions" translation="모서리 연장"/>
	<label commandName="ObjectPropertiesSubgroupHiddenLines" devLabel="Hidden Lines" translation="은선"/>
	<label commandName="ObjectPropertiesSubgroupHiddenLinesNarrow" devLabel="Hidden Lines (narrow)" translation="(좁은) 은선"/>
	<label commandName="ObjectPropertiesSubgroupHoleAndThreadNotes" devLabel="Hole and Thread Notes" translation="홀 및 스레드 주"/>
	<label commandName="ObjectPropertiesSubgroupHoleId" devLabel="Hole IDs" translation="홀 ID"/>
	<label commandName="ObjectPropertiesSubgroupHoleTable" devLabel="Hole Table" translation="홀 테이블"/>
	<label commandName="ObjectPropertiesSubgroupHoleTableOrigin" devLabel="Hole Table Origin" translation="홀 테이블 원점"/>
	<label commandName="ObjectPropertiesSubgroupLeaderNotes" devLabel="Leader Notes" translation="지시선 주"/>
	<label commandName="ObjectPropertiesSubgroupModelSketches" devLabel="Model Sketches" translation="모형 스케치"/>
	<label commandName="ObjectPropertiesSubgroupPartsList" devLabel="Parts List" translation="부품 리스트"/>
	<label commandName="ObjectPropertiesSubgroupRevisionCloud" devLabel="Revision Cloud" translation="구름형 리비전"/>
	<label commandName="ObjectPropertiesSubgroupRevisionHistoryTable" devLabel="Revision History Table" translation="리비전 내역 테이블"/>
	<label commandName="ObjectPropertiesSubgroupRevisionMarker" devLabel="Revision Marker" translation="리비전 표식기"/>
	<label commandName="ObjectPropertiesSubgroupSectionLines" devLabel="Section Lines" translation="단면 선"/>
	<label commandName="ObjectPropertiesSubgroupSymbols" devLabel="Symbols" translation="기호"/>
	<label commandName="ObjectPropertiesSubgroupTangentEdges" devLabel="Tangent Edges" translation="접선 모서리"/>
	<label commandName="ObjectPropertiesSubgroupTweakTrails" devLabel="Tweak Trails" translation="미세조정 트레일"/>
	<label commandName="ObjectPropertiesSubgroupViewLabel" devLabel="View Label" translation="뷰 레이블"/>
	<label commandName="ObjectPropertiesSubgroupVisibleOuterLines" devLabel="Visible Outer Lines" translation="보이는 외부 선"/>
	<label commandName="ObjectPropertiesSymbolsLineWeightInput" devLabel="Line Width" translation="선 폭"/>
	<label commandName="ObjectPropertiesTangentEdgesLineTypeInput" devLabel="Line Type" translation="선종류"/>
	<label commandName="ObjectPropertiesTangentEdgesLineWeightInput" devLabel="Line Width" translation="선 폭"/>
	<label commandName="ObjectPropertiesTweakTrailsLineTypeInput" devLabel="Line Type" translation="선종류"/>
	<label commandName="ObjectPropertiesTweakTrailsLineWeightInput" devLabel="Line Width" translation="선 폭"/>
	<label commandName="ObjectPropertiesVisibleOutlinesLineTypeInput" devLabel="Line Type" translation="선종류"/>
	<label commandName="ObjectPropertiesVisibleOutlinesLineWeightInput" devLabel="Line Width" translation="선 폭"/>
	<label commandName="Oblique" devLabel=" Oblique" translation=" 기울기"/>
	<label commandName="Off" devLabel="Off" translation="끄기"/>
	<label commandName="OfflineFusionDrawingItem" devLabel="New Offline Drawing Item" translation="새 오프라인 도면 항목"/>
	<label commandName="OffsetDistance" devLabel="Distance" translation="거리"/>
	<label commandName="Ok" devLabel="OK" translation="확인"/>
	<label commandName="On" devLabel="On" translation="켜기"/>
	<label commandName="Open" devLabel=" Open" translation=" 열기"/>
	<label commandName="Open30" devLabel=" Open 30" translation=" 열기 30"/>
	<label commandName="Open90" devLabel=" Right Angle" translation=" 직각"/>
	<label commandName="OpenAutoDrawing" devLabel="Open Drawing After Generation" translation="생성 후 도면 열기"/>
	<label commandName="OpenRateLimitedMsg" devLabel="Unable to complete operation due to heavy system load. Please try again in a few minutes." translation="큰 시스템 부하 때문에 작업을 완료할 수 없습니다. 몇 분 후에 다시 시도하십시오."/>
	<label commandName="OpenRateLimitedTitle" devLabel="Unable to complete operation" translation="작업을 완료할 수 없음"/>
	<label commandName="OpenRelatedDesignCommand" devLabel="Open" translation="열기"/>
	<label commandName="Options" devLabel="Options" translation="옵션"/>
	<label commandName="OrdinateDimGenAlgorithm" devLabel="Ordinate Dim Generator Algorithm" translation="세로좌표 치수 생성기 알고리즘"/>
	<label commandName="OrdinateRecipeTitle" devLabel="Ordinate Dimensions" translation="세로좌표 치수"/>
	<label commandName="Orientation" devLabel="Orientation" translation="방향"/>
	<label commandName="Origin" devLabel=" Origin Indicator" translation=" 원점 지시자"/>
	<label commandName="Origin Block" devLabel="Origin Block" translation="원점 블록"/>
	<label commandName="Origin2" devLabel=" Origin Indicator 2" translation=" 원점 지시자 2"/>
	<label commandName="OriginSettings" devLabel="Origin Settings" translation="원점 설정"/>
	<label commandName="OriginStyleALTERNATE" devLabel="Alternate Origin" translation="대체 원점"/>
	<label commandName="OriginStyleALTERNATEDescription" devLabel="Identifies the X0, Y0 location for hole tables or ordinate dimensions" translation="홀 테이블 또는 세로좌표 치수의 X0, Y0 위치를 식별합니다."/>
	<label commandName="OriginStyleALTERNATETitle" devLabel="Alternate Origin" translation="대체 원점"/>
	<label commandName="OriginStyleASME" devLabel="ASME Origin" translation="ASME 원점"/>
	<label commandName="OriginStyleASMEDescription" devLabel="Identifies the X0, Y0 location for ASME hole tables or ordinate dimensions" translation="ASME 홀 테이블 또는 세로좌표 치수의 X0, Y0 위치를 식별합니다."/>
	<label commandName="OriginStyleASMETitle" devLabel="ASME Origin" translation="ASME 원점"/>
	<label commandName="OriginStyleDatumTarget" devLabel="Datum Target" translation="데이텀 대상"/>
	<label commandName="OriginStyleDatumTargetDescription" devLabel="Identifies the X0, Y0 location for hole tables or ordinate dimensions" translation="홀 테이블 또는 세로좌표 치수의 X0, Y0 위치를 식별합니다."/>
	<label commandName="OriginStyleDatumTargetTitle" devLabel="Datum Target" translation="데이텀 대상"/>
	<label commandName="OriginStyleISO" devLabel="ISO Origin" translation="ISO 원점"/>
	<label commandName="OriginStyleISODescription" devLabel="Identifies the X0, Y0 location for ISO hole tables or ordinate dimensions" translation="ISO 홀 테이블 또는 세로좌표 치수의 X0, Y0 위치를 식별합니다."/>
	<label commandName="OriginStyleISOTitle" devLabel="ISO Origin" translation="ISO 원점"/>
	<label commandName="OtherSideDesc" devLabel="Show other side properties" translation="다른 면 특성 표시"/>
	<label commandName="OtherSideToolTip" devLabel="Other Side" translation="반대쪽"/>
	<label commandName="OutOfDateContent" devLabel="Out of date content" translation="오래된 컨텐츠"/>
	<label commandName="OutlineTypeJagged" devLabel="Jagged" translation="톱니 모양"/>
	<label commandName="OutlineTypeStraight" devLabel="Straight" translation="직선"/>
	<label commandName="OutputDrawingTemplateCaption" devLabel="Output Template" translation="출력 템플릿"/>
	<label commandName="OutputDrawingTemplateFilter" devLabel="Drawing Template Files (*.f2t)" translation="도면 템플릿 파일(*.f2t)"/>
	<label commandName="OverallDimsGeneratorAlgo" devLabel="Overall Dim Generator Algorithm" translation="전체 치수 생성기 알고리즘"/>
	<label commandName="OverallRecipeTitle" devLabel="Overall Dimensions" translation="전체 치수"/>
	<label commandName="Overwrite" devLabel="Overwrite" translation="덮어쓰기"/>
	<label commandName="PCBReprensentation" devLabel="PCB" translation="PCB"/>
	<label commandName="PHANTOM2" devLabel="PHANTOM2" translation="가상선2"/>
	<label commandName="PIMDrawingGroup" devLabel="Drawing" translation="도면"/>
	<label commandName="PLM360DownloadFilePathEmpty" devLabel="Cannot insert this file." translation="이 파일을 삽입할 수 없습니다."/>
	<label commandName="PaddAsPerAnnotations" devLabel="Padd As Per Annotations" translation="주석에 따라 채우기"/>
	<label commandName="PaddAsPerDetails" devLabel="Padd As Per Details" translation="세부 정보에 따라 채우기"/>
	<label commandName="PaperOrientation_Landscape" devLabel="Landscape" translation="가로"/>
	<label commandName="PaperOrientation_Portrait" devLabel="Portrait" translation="세로"/>
	<label commandName="PartListLoc1" devLabel="Bottom Left" translation="저면도 왼쪽"/>
	<label commandName="PartListLoc2" devLabel="Bottom Right" translation="저면도 오른쪽"/>
	<label commandName="PartListLoc3" devLabel="Top Left" translation="상단 왼쪽"/>
	<label commandName="PartListLoc4" devLabel="Top Right" translation="상단 오른쪽"/>
	<label commandName="PartialArcDimension" devLabel="Partial" translation="부분"/>
	<label commandName="PartsListAllLevelInput" devLabel="All Level" translation="모든 단계"/>
	<label commandName="PartsListAutoBalloonInput" devLabel="Auto Balloon" translation="자동 품번기호"/>
	<label commandName="PartsListColorButton" devLabel="Select Color" translation="색상 선택"/>
	<label commandName="PartsListColorInput" devLabel="Color" translation="색상"/>
	<label commandName="PartsListDefaults" devLabel="Parts List Defaults" translation="부품 리스트 기본값"/>
	<label commandName="PartsListEditAutoBalloonInput" devLabel="Auto Balloon" translation="자동 품번기호"/>
	<label commandName="PartsListFirstLevelInput" devLabel="First Level" translation="첫 번째 단계"/>
	<label commandName="PartsListStructureInput" devLabel="Structure" translation="구조"/>
	<label commandName="PartsListTip" devLabel="Creates a parts list for the selected assembly, storyboard, component or sheet metal reference." translation="선택한 조립품, 스토리보드, 구성요소 또는 판금 참조에 대한 부품 리스트를 작성합니다."/>
	<label commandName="Patent" devLabel="Patent" translation="특허"/>
	<label commandName="PreferHZ" devLabel="Prefer Horizontal" translation="수평 선호"/>
	<label commandName="PrintDialog_Commit" devLabel="Print" translation="인쇄"/>
	<label commandName="PrintDialog_EmptyPrinterList" devLabel="The printer list is not available." translation="프린터 리스트를 사용할 수 없습니다."/>
	<label commandName="PrintDialog_Offset" devLabel="Offset" translation="간격띄우기"/>
	<label commandName="PrintDialog_PreviewNextButton" devLabel="Next" translation="다음"/>
	<label commandName="PrintDialog_PreviewPreviousButton" devLabel="Previous" translation="이전"/>
	<label commandName="PrintDialog_PrinteRange" devLabel="Print Range" translation="인쇄 범위"/>
	<label commandName="PrintDialog_Printer" devLabel="Printer Name" translation="프린터 이름"/>
	<label commandName="PrintDialog_PrinterSetup" devLabel="Printer Setup" translation="프린터 설정"/>
	<label commandName="PrintDialog_PrinterUnavailable" devLabel="The selected printer is no longer available. Please select an available printer." translation="선택한 프린터를 더 이상 사용할 수 없습니다. 사용 가능한 프린터를 선택하십시오."/>
	<label commandName="PrintDialog_PropertiesButton" devLabel="Properties" translation="특성"/>
	<label commandName="PrintDialog_Range_AllSheets" devLabel="All Sheets" translation="모든 시트"/>
	<label commandName="PrintDialog_Range_CurrentSheet" devLabel="Current Sheet" translation="현재 시트"/>
	<label commandName="PrintDialog_Range_SheetsInRange" devLabel="Sheets in Range:" translation="시트 범위:"/>
	<label commandName="PrintDialog_Scale" devLabel="Scale" translation="축척"/>
	<label commandName="PrintDialog_Setting" devLabel="Settings" translation="설정"/>
	<label commandName="PrintDialog_Title" devLabel="Print" translation="인쇄"/>
	<label commandName="PrintScale_FitToPaper" devLabel="Fit to paper" translation="용지에 맞춤"/>
	<label commandName="PrintToFileExistingFilesWarning" devLabel="%1% already exist.&#xA;&#xA;What would you like to do?" translation="%1%이(가) 이미 있습니다.&#xA;&#xA;어떻게 하시겠습니까?"/>
	<label commandName="PrintToFileExistingFilesWarning2" devLabel="%1% already exists.&#xA;&#xA;What would you like to do?" translation="%1%이(가) 이미 있습니다.&#xA;&#xA;어떻게 하시겠습니까?"/>
	<label commandName="PrintToFileFilesInUseWarning" devLabel="%1% cannot be replaced because they are in use." translation="%1%은(는) 사용 중이므로 대체할 수 없습니다."/>
	<label commandName="PrintToFileFilesInUseWarning2" devLabel="%1% cannot be replaced because it is in use." translation="%1%은(는) 사용 중이므로 대체할 수 없습니다."/>
	<label commandName="PrintToFileList1" devLabel="and another %1% files" translation="및 다른 %1% 파일"/>
	<label commandName="PrintToFileList2" devLabel="and another %1% file" translation="및 다른 %1% 파일"/>
	<label commandName="PrinterList_Printer" devLabel="Printer Name" translation="프린터 이름"/>
	<label commandName="Process" devLabel="Process" translation="공정"/>
	<label commandName="Process1" devLabel="1st Process" translation="첫 번째 공정"/>
	<label commandName="Process2" devLabel="2nd Process" translation="두 번째 공정"/>
	<label commandName="ProgressInfoTextGenerating" devLabel="Generating..." translation="생성 중..."/>
	<label commandName="ProjecteAnd3dLengthCheckAlgorithm" devLabel="Projected And 3d Length Check Algorithm" translation="투영 및 3D 길이 검사 알고리즘"/>
	<label commandName="Properties" devLabel="Properties" translation="특성"/>
	<label commandName="PropertiesGroup" devLabel="Properties" translation="특성"/>
	<label commandName="PropertiesSection" devLabel="Properties" translation="특성"/>
	<label commandName="PropertyAddTooltip" devLabel="Insert Property" translation="특성 삽입"/>
	<label commandName="PropertyColorInput" devLabel="Color" translation="색상"/>
	<label commandName="PropertyInput" devLabel="Property" translation="특성"/>
	<label commandName="PropertyValueInput" devLabel="Property Value" translation="특성 값"/>
	<label commandName="RIAnimationTooltipHeader" devLabel="Animation" translation="애니메이션"/>
	<label commandName="RIAnimationUnavailableTooltipHeader" devLabel="Animation (unavailable)" translation="애니메이션(사용할 수 없음)"/>
	<label commandName="RIAutomateLabel" devLabel="Automate" translation="자동화"/>
	<label commandName="RIAutomateTooltipHeader" devLabel="Automate" translation="자동화"/>
	<label commandName="RIDesignLabel" devLabel="Design" translation="디자인"/>
	<label commandName="RIDesignTooltipHeader" devLabel="Design" translation="디자인"/>
	<label commandName="RIDrawingDescription" devLabel="Create views and annotations to document the active design for manufacturing." translation="제조를 위한 활성 디자인을 문서화하기 위해 뷰와 주석을 작성합니다."/>
	<label commandName="RIDrawingHeading" devLabel="Drawing" translation="도면"/>
	<label commandName="RIDrawingRadioLabel" devLabel="Drawing" translation="도면"/>
	<label commandName="RIDrawingTooltipHeader" devLabel="Drawing" translation="도면"/>
	<label commandName="RIDrawingUnavailableTooltipHeader" devLabel="Drawing (unavailable)" translation="도면(사용할 수 없음)"/>
	<label commandName="RIFromAnimationLabel" devLabel="Animation" translation="애니메이션"/>
	<label commandName="RIFromDesignLabel" devLabel="Design" translation="디자인"/>
	<label commandName="RIFromLabel" devLabel="From" translation="시작"/>
	<label commandName="RITemplateRadioLabel" devLabel="Template" translation="템플릿"/>
	<label commandName="RITemplateTooltipHeader" devLabel="Drawing Template" translation="도면 템플릿"/>
	<label commandName="RITypeLabel" devLabel="Type" translation="유형"/>
	<label commandName="RadialArcAnglehreshold_ASME" devLabel="Radial Arc Angle threshold" translation="반지름 호 각도 임계값"/>
	<label commandName="RadialArcLengthThreshold_ASME" devLabel="Radial Arc length threshold" translation="반지름 호 길이 임계값"/>
	<label commandName="RadialArcLengthThreshold_ISO" devLabel="Radial Arc length threshold" translation="반지름 호 길이 임계값"/>
	<label commandName="Range" devLabel="Range (Multi-File)" translation="범위(다중 파일)"/>
	<label commandName="RangePreviewText" devLabel="eg. 1-4, 8, 9" translation="예: 1-4, 8, 9"/>
	<label commandName="RedoCommand" devLabel="Redo" translation="명령복구"/>
	<label commandName="RedoCommandDesc" devLabel="Redo" translation="명령복구"/>
	<label commandName="RedundantDimensionRemovalAlgorithm" devLabel="Redundant Dimension Removal Algorithm(Graph)" translation="중복 치수 제거 알고리즘(그래프)"/>
	<label commandName="ReferenceLabelStr" devLabel="Reference/s:" translation="참조:"/>
	<label commandName="ReferencedDesignNotLastestVersion" devLabel="Referenced design is not the latest version. The latest version will be opened." translation="참조된 설계가 최신 버전이 아닙니다. 최신 버전이 열립니다."/>
	<label commandName="ReferencedDesignNotLastestVersion_ccy" devLabel="Referenced design is not the latest. The latest change will be opened." translation="참조된 디자인이 최신 버전이 아닙니다. 마지막 변경 사항이 열립니다."/>
	<label commandName="RefreshingPropertiesWarnOffline" devLabel="You are working offline" translation="오프라인으로 작업 중입니다."/>
	<label commandName="RefreshingPropertiesWarnOnline" devLabel="Some properties may be out of date" translation="일부 특성은 오래된 버전일 수 있습니다."/>
	<label commandName="RefsUptoDate" devLabel="References are up-to-date." translation="참조가 최신 상태입니다."/>
	<label commandName="RelativeSmallDim" devLabel="Relative small dim percentage" translation="상대적으로 작은 치수 백분율"/>
	<label commandName="RelativelySmallDimWithDifferentXorYAlgo" devLabel="Relatively Small Dims With Different XY Algorithm" translation="다른 XY 알고리즘을 사용하는 상대적으로 작은 치수"/>
	<label commandName="RemoveDimsInTemplateWorkflow" devLabel="Remove Quick Dims In Template Workflow" translation="템플릿 워크플로우에서 빠른 치수 제거"/>
	<label commandName="RemoveDisassociatedDims" devLabel="Remove Disassociated Dims" translation="연관해제된 치수 제거"/>
	<label commandName="RenameSketchSymbol" devLabel="Rename" translation="이름바꾸기"/>
	<label commandName="RenameTitleBlock" devLabel="Rename" translation="이름바꾸기"/>
	<label commandName="RenderMode" devLabel="Render Mode" translation="렌더 모드"/>
	<label commandName="RenumberNumber" devLabel="Number" translation="공구번호"/>
	<label commandName="RenumberSelectionInput" devLabel="Selection" translation="선택"/>
	<label commandName="RenumberTypeInput" devLabel="Type" translation="유형"/>
	<label commandName="ReplaceDimText" devLabel="Replace Dimension Text" translation="치수 문자 대체"/>
	<label commandName="ReplaceWithConfigAspectGroup" devLabel="Replace Dimension Text" translation="치수 문자 대체"/>
	<label commandName="Representation" devLabel="Representation" translation="표현"/>
	<label commandName="ResetBreakoutStartPoint" devLabel="Reset Start Point" translation="시작점 재설정"/>
	<label commandName="ResetBreakoutStartPointTooltip" devLabel="Resets start point to front of the model" translation="시작점을 모형 앞으로 재설정합니다."/>
	<label commandName="ResetDefault" devLabel="Reset Properties" translation="특성 재설정"/>
	<label commandName="RestartSelectionInput" devLabel="Restart Selection" translation="선택 다시 시작"/>
	<label commandName="RevTableEditTextSettings" devLabel="Text Settings" translation="문자 설정"/>
	<label commandName="Revision" devLabel="Rev." translation="리비전"/>
	<label commandName="RevisionCloudColorButton" devLabel="Select Color" translation="색상 선택"/>
	<label commandName="RevisionCloudColorInput" devLabel="Color" translation="색상"/>
	<label commandName="RevisionCustom" devLabel="Custom" translation="사용자화"/>
	<label commandName="RevisionHistoryLabel" devLabel="Revision History" translation="리비전 내역"/>
	<label commandName="RevisionHistoryTable" devLabel="RevisionHistoryTable" translation="리비전 내역 테이블"/>
	<label commandName="RevisionHistoryTableColorButton" devLabel="Select Color" translation="색상 선택"/>
	<label commandName="RevisionHistoryTableColorInput" devLabel="Color" translation="색상"/>
	<label commandName="RevisionMarker" devLabel="Revision" translation="리비전"/>
	<label commandName="RevisionMarkerColorButton" devLabel="Select Color" translation="색상 선택"/>
	<label commandName="RevisionMarkerColorInput" devLabel="Color" translation="색상"/>
	<label commandName="RevisionTableTip" devLabel="Creates a revision history for the selected sheet." translation="선택한 시트에 대한 리비전 내역을 작성합니다."/>
	<label commandName="Right" devLabel="Right" translation="오른쪽"/>
	<label commandName="RotateAngleInput" devLabel="Angle" translation="각도"/>
	<label commandName="RotateReference" devLabel="Reference" translation="참조"/>
	<label commandName="RotateTransformPtPtTooltip" devLabel="Rotate" translation="회전"/>
	<label commandName="RunAutoCmdsDuringTests" devLabel="Run Auto-Cmds during automation tests" translation="자동화 테스트 중에 자동 명령 실행"/>
	<label commandName="SE Isometric" devLabel="SE Isometric" translation="남동 등각투영"/>
	<label commandName="SKETCHLEADER_PROP" devLabel="Leader Attachment" translation="지시선 부착"/>
	<label commandName="SKETCHNAME_PROP" devLabel="Sketch Name" translation="스케치 이름"/>
	<label commandName="STAnimation" devLabel="Animation" translation="애니메이션"/>
	<label commandName="STAnimationDesc" devLabel="Settings that apply to the drawing from a storyboard created in the Animation workspace." translation="애니메이션 작업공간에서 작성된 스토리보드의 도면에 적용되는 설정입니다."/>
	<label commandName="STComponent" devLabel="Component" translation="구성요소"/>
	<label commandName="STComponentDesc" devLabel="Settings that apply to a component." translation="구성요소에 적용되는 설정입니다."/>
	<label commandName="STFlatPattern" devLabel="Flat Pattern" translation="플랫 패턴"/>
	<label commandName="STFlatPatternDesc" devLabel="Settings that apply to the flat pattern view." translation="플랫 패턴 뷰에 적용되는 설정입니다."/>
	<label commandName="STFolded" devLabel="Folded Model" translation="접힌 모형"/>
	<label commandName="STFoldedDesc" devLabel="Settings that apply to the folded model view." translation="접힌 모형 뷰에 적용되는 설정입니다."/>
	<label commandName="STGlobal" devLabel="Global" translation="전역"/>
	<label commandName="STGlobalDesc" devLabel="Settings that apply across all automation preferences and sheets." translation="모든 자동화 기본 설정 및 시트에 적용되는 설정입니다."/>
	<label commandName="STMainAssembly" devLabel="Main Assembly" translation="주 조립품"/>
	<label commandName="STMainAssemblylDesc" devLabel="Preferences that apply to the top-level assembly, including all sub-assemblies and components." translation="모든 부분조립품 및 구성요소를 포함하여 맨 위 단계 조립품에 적용되는 기본 설정입니다."/>
	<label commandName="STSubAssembly" devLabel="Sub-Assembly" translation="부분조립품"/>
	<label commandName="STSubAssemblyDesc" devLabel="Settings that apply to this sub-assembly and its components." translation="이 부분조립품 및 해당 구성요소에 적용되는 설정입니다."/>
	<label commandName="SW Isometric" devLabel="SW Isometric" translation="남서 등각투영"/>
	<label commandName="SYMBOL_SETTINGS_GROUP" devLabel="Symbol Settings" translation="기호 설정"/>
	<label commandName="SameCircularDimFungibilityAlgo" devLabel="Same Circular Dim Fungibility Algorithm" translation="동일한 원형 치수 대체 가능 알고리즘"/>
	<label commandName="SameLoopCheckerAlgorithm" devLabel="Same Loop Checker Algorithm" translation="동일한 루프 검사기 알고리즘"/>
	<label commandName="SameLoopFungibilityAlgo" devLabel="Same Loop Fungibility Algorithm" translation="동일한 루프 대체 가능 알고리즘"/>
	<label commandName="SaveAsTemplateButton" devLabel="Save as New Drawing Template" translation="새 도면 템플릿으로 저장"/>
	<label commandName="Scale" devLabel="Scale" translation="축척"/>
	<label commandName="SearchText" devLabel="Search Symbol" translation="기호 검색"/>
	<label commandName="SecondFrame" devLabel="Second Frame" translation="두 번째 프레임"/>
	<label commandName="SectionLinesColorButton" devLabel="Select Color" translation="색상 선택"/>
	<label commandName="SectionLinesColorInput" devLabel="Color" translation="색상"/>
	<label commandName="SectionViewDepthGroup" devLabel="Section Depth" translation="단면 깊이"/>
	<label commandName="SectionViewDepthInput" devLabel="Depth" translation="깊이"/>
	<label commandName="SectionViewDistaceButton" devLabel="Set Distance" translation="거리 설정"/>
	<label commandName="SectionViewDistanceInput" devLabel="Distance" translation="거리"/>
	<label commandName="SectionViewDistanceOption" devLabel="Distance" translation="거리"/>
	<label commandName="SectionViewFullOption" devLabel="Full" translation="전체"/>
	<label commandName="SectionViewSliceOption" devLabel="Slice" translation="슬라이스"/>
	<label commandName="Select" devLabel="Select" translation="선택"/>
	<label commandName="Select columns" devLabel="Select columns" translation="열 선택"/>
	<label commandName="SelectATemplate" devLabel="Selecting a drawing template" translation="도면 템플릿 선택"/>
	<label commandName="SelectDrawingComponents" devLabel="Select components to include in drawing" translation="도면에 포함할 구성요소 선택"/>
	<label commandName="SelectEdgeInput" devLabel="Select edge" translation="모서리 선택"/>
	<label commandName="SelectPlacementInput" devLabel="Placement" translation="배치"/>
	<label commandName="SelectedSheets" devLabel="Selected Sheets (Multi-File)" translation="선택한 시트(다중 파일)"/>
	<label commandName="SelectionInput" devLabel="Selection" translation="선택"/>
	<label commandName="SelectionInputSimpleStyleTail" devLabel="selected" translation="선택됨"/>
	<label commandName="SelectionInputSimpleStyleTail2" devLabel="Selected" translation="선택됨"/>
	<label commandName="ShadedWithVisibleAndHiddenEdges" devLabel="Shaded with Hidden Edges" translation="숨겨진 모서리로 음영처리"/>
	<label commandName="ShadedWithVisibleEdges" devLabel="Shaded" translation="음영처리"/>
	<label commandName="Sheet" devLabel="Sheet" translation="시트"/>
	<label commandName="Sheet MetalFlat Pattern" devLabel="Sheet Metal: Flat Pattern" translation="판금: 플랫 패턴"/>
	<label commandName="SheetLandscape" devLabel="Landscape" translation="가로"/>
	<label commandName="SheetMetalFlatGroup" devLabel="Sheet Metal : Flat" translation="판금: 플랫"/>
	<label commandName="SheetMetalFlatPCreateSheet" devLabel="SheetMetal: Flat Pattern" translation="판금: 플랫 패턴"/>
	<label commandName="SheetMetalFlatPISOWithOrthoViews" devLabel="Add Folded Metal Isometric View" translation="접힌 금속 등각투영 뷰 추가"/>
	<label commandName="SheetMetalFlatPIncludeBendTable" devLabel="Include Bend Table" translation="절곡부 테이블 포함"/>
	<label commandName="SheetMetalFlatPIncludeBendTableLoc" devLabel="Bend Table Location" translation="절곡부 테이블 위치"/>
	<label commandName="SheetMetalFlatPWithOrthoViews" devLabel="SheetMetal: Sheet With Orthogonal Views" translation="판금: 직교 뷰가 있는 시트"/>
	<label commandName="SheetMetalFoldedCreateSheet" devLabel="Create Sheet" translation="시트 작성"/>
	<label commandName="SheetMetalFoldedGroup" devLabel="Sheet Metal : Folded" translation="판금: 접힌 패턴"/>
	<label commandName="SheetMetalFoldedISOWithOrthoViews" devLabel="Add ISO View with Ortho Views" translation="직교 뷰가 있는 ISO 뷰 추가"/>
	<label commandName="SheetMetalFoldedWithOrthoViews" devLabel="Sheet With Orthogonal Views" translation="직교 뷰가 있는 시트"/>
	<label commandName="SheetPortrait" devLabel="Portrait" translation="세로"/>
	<label commandName="SheetRange" devLabel="Range (C2:D5)" translation="범위(C2:D5)"/>
	<label commandName="SheetSet" devLabel="Sheet Set" translation="시트 세트"/>
	<label commandName="SheetsToCreate" devLabel="Sheet Count" translation="시트 개수"/>
	<label commandName="Shortened" devLabel="Shortened" translation="단축됨"/>
	<label commandName="ShowHistory" devLabel="History" translation="히스토리"/>
	<label commandName="ShowHistoryClose" devLabel="Close" translation="닫기"/>
	<label commandName="ShowOutline" devLabel="Show Outline" translation="외곽선 표시"/>
	<label commandName="ShowSheetContext" devLabel="Show Sheet Context" translation="시트 컨텍스트 표시"/>
	<label commandName="ShowSheetLayoutGrid" devLabel="Show Sheet Layout Grid" translation="시트 배치 그리드 표시"/>
	<label commandName="ShowStandardLabel" devLabel="Show Standard Label" translation="표준 레이블 표시"/>
	<label commandName="ShowUCA" devLabel="Change Summary" translation="변경 요약"/>
	<label commandName="SimilarHoleIdentifierAlgo" devLabel="Similar Hole Identifier Algorithm" translation="유사한 홀 식별자 알고리즘"/>
	<label commandName="SimpleDialog_Cancel" devLabel="Cancel" translation="취소"/>
	<label commandName="SimpleDialog_Commit" devLabel="OK" translation="확인"/>
	<label commandName="Size" devLabel="Size" translation="크기"/>
	<label commandName="SketchAlreadyPresent" devLabel="A sketch with same name already exists." translation="이름이 같은 스케치가 이미 있습니다."/>
	<label commandName="SketchLineTypeInput" devLabel="Line Type" translation="선종류"/>
	<label commandName="SketchLineWidthInput" devLabel="Line Width" translation="선 폭"/>
	<label commandName="SketchNameTooLong" devLabel="Sketch name is too long." translation="스케치 이름이 너무 깁니다."/>
	<label commandName="SketchShapes" devLabel="Cut Profile" translation="절단 프로파일"/>
	<label commandName="SketchShowHideCommand" devLabel="Show/Hide" translation="표시/숨기기"/>
	<label commandName="SketchSymboEditAttributeCommand" devLabel="Edit custom label" translation="사용자 설정 레이블 편집"/>
	<label commandName="SketchTypeInput" devLabel="Sketch Type" translation="스케치 유형"/>
	<label commandName="SliderValue" devLabel="Slider Value" translation="슬라이더 값"/>
	<label commandName="Small" devLabel=" Dot Small Blank" translation=" 빈 작은 점"/>
	<label commandName="SmallDimPriorityModifierAlgo" devLabel="Small Dimension Priority Modifier" translation="작은 치수 우선순위 수정자"/>
	<label commandName="SmallDimThreshold_ASME" devLabel="Small dimension threshold" translation="작은 치수 임계값"/>
	<label commandName="SmallDimThreshold_ISO" devLabel="Small dimension threshold" translation="작은 치수 임계값"/>
	<label commandName="SmartTempMsg" devLabel="Drawing Template has views and sheets added. Sheet and View will be generated accordingly." translation="도면 템플릿에 뷰와 시트가 추가되어 있습니다. 이에 따라 시트 및 뷰가 생성됩니다."/>
	<label commandName="SnapToGrid" devLabel="Snap to Grid" translation="그리드로 스냅"/>
	<label commandName="Source" devLabel="Source" translation="원본"/>
	<label commandName="Spacer" devLabel="Spacer" translation="스페이서"/>
	<label commandName="SpreadSheetFiles" devLabel="Spread Sheet Files" translation="스프레드시트 파일"/>
	<label commandName="Standard" devLabel="Standard" translation="표준"/>
	<label commandName="Storyboard" devLabel="Storyboard" translation="스토리보드"/>
	<label commandName="StoryboardRepresentation" devLabel="Storyboard" translation="스토리보드"/>
	<label commandName="SubASMCreateSheetOrtho" devLabel="Sheet with Ortho Views" translation="직교 뷰가 있는 시트"/>
	<label commandName="SubASMGroup" devLabel="Sub Assemblies" translation="부분조립품"/>
	<label commandName="SubASMISOGroup" devLabel="Sub Assemblies ISO" translation="부분조립품 ISO"/>
	<label commandName="SubASMOrthoGroup" devLabel="Sub Assemblies Ortho" translation="부분조립품 직교"/>
	<label commandName="SubASMOrthoPartListLocation" devLabel="Default Parts List Location" translation="기본 부품 리스트 위치"/>
	<label commandName="SubASMSheetCreate" devLabel="Create Sub Assembly" translation="부분조립품 작성"/>
	<label commandName="SubASMSheetISOPartList" devLabel="Include Parts List" translation="부품 리스트 포함"/>
	<label commandName="SubASMSheetOrthoPartList" devLabel="Include Parts List" translation="부품 리스트 포함"/>
	<label commandName="SubASMSheetSingleISO" devLabel="Sheet with Single ISO View" translation="단일 ISO 뷰가 있는 시트"/>
	<label commandName="SubASmSheetISOPartListLocation" devLabel="Default Parts List Location" translation="기본 부품 리스트 위치"/>
	<label commandName="SurfaceTextureReset" devLabel="Reset" translation="재설정"/>
	<label commandName="SurfaceTextureResetDesc" devLabel="Reset all properties to default values" translation="모든 특성을 기본값으로 재설정"/>
	<label commandName="SwitchConfigWarningMsg" devLabel="&lt;p&gt;The &lt;b&gt;Configuration&lt;/b&gt; you select will replace the original &lt;b&gt;Configuration&lt;/b&gt;. It may impact multiple views and sheets in this drawing.&lt;/p&gt;" translation="&lt;p&gt;선택한 &lt;b&gt;구성&lt;/b&gt;이 원래 &lt;b&gt;구성&lt;/b&gt;을 대체합니다. 이 구성은 이 도면의 여러 뷰와 시트에 영향을 줄 수 있습니다.&lt;/p&gt;"/>
	<label commandName="SwitchConfigWarningTitle" devLabel="Changes may impact multiple views/sheets" translation="변경 사항이 여러 뷰/시트에 영향을 줄 수 있음"/>
	<label commandName="SwitchConfigurationCommand" devLabel="Switch Configuration" translation="구성 전환"/>
	<label commandName="SymbolColorButton" devLabel="Select Color" translation="색상 선택"/>
	<label commandName="SymbolColorInput" devLabel="Color" translation="색상"/>
	<label commandName="SymbolDesc" devLabel="Shows the Symbol Object Properties" translation="기호 객체 특성 표시"/>
	<label commandName="SymbolName" devLabel="Symbol Name" translation="기호 이름"/>
	<label commandName="SymbolToolTip" devLabel="Symbol" translation="기호"/>
	<label commandName="SymmetricDimsGeneratorAlgo" devLabel="Symmetric Dim Generator Algorithm" translation="대칭 치수 생성기 알고리즘"/>
	<label commandName="SymmetricRecipeSettingAlgo" devLabel="Symmetric Recipe Setting Algorithm" translation="대칭 레시피 설정 알고리즘"/>
	<label commandName="SymmetricRecipeTitle" devLabel="Symmetric Dimensions" translation="대칭 치수"/>
	<label commandName="SymmetricWithBaselineDimsGenerator" devLabel="Symmetric With Baseline Dim Generator Algorithm" translation="기준선 사용 대칭 치수 생성기 알고리즘"/>
	<label commandName="SymmetricWithBaselineRecipeTitle" devLabel="Symmetric with Baseline&#xA;Dimensions" translation="기준선 사용 대칭&#xA;치수"/>
	<label commandName="SymmetricWithOrdinateRecipeTitle" devLabel="Symmetric with Ordinate Dimensions" translation="세로좌표 치수 사용 대칭"/>
	<label commandName="SymmetryDimFungibilityAlgo" devLabel="Symmetry Dim Fungibility Algorithm" translation="대칭 치수 대체 가능 알고리즘"/>
	<label commandName="TABLE_TITLE_BENDTABLE" devLabel="Bend Table" translation="절곡부 테이블"/>
	<label commandName="TABLE_TITLE_PARTSLIST" devLabel="Parts List" translation="부품 리스트"/>
	<label commandName="TIP_DESC_H11A11" devLabel="Pivots, latches, fits of parts exposed to corrosive effects,&#xA;contamination with dust and thermal or mechanical deformations." translation="부식성 환경, 먼지 오염 및 열적/기계적 변형에 노출된&#xA;피벗, 래치, 부품의 결합부."/>
	<label commandName="TIP_DESC_H11C11" devLabel="Loose running fit for wide commercial tolerances&#xA;or allowances on external members." translation="다양한 상업용 공차 또는 외부 멤버의 허용 오차에&#xA;사용되는 자유 실행 맞춤."/>
	<label commandName="TIP_DESC_H11D9" devLabel="Rotary fit connection with considerable clearance&#xA;Assembly-with a large clearance&#xA;Multiple collated shafts of manufacturing and piston machines,&#xA;Shafts from melted steel circular sticks." translation="상당한 틈새를 사용한 회전 맞춤 연결&#xA;큰 틈새가 있는 조립품&#xA;제조 기계 및 피스톤 기계의 여러 개가 합쳐진 샤프트,&#xA;융해된 강 원형 스틱으로 만든 샤프트."/>
	<label commandName="TIP_DESC_H11H9" devLabel="Shear fit connection&#xA;Put on without larger force&#xA;Components can move by hand after lubrication&#xA;Lightly disassemble portions, expanding ring,&#xA;Components of agricultural machines fixed to shafts with pivots,&#xA;screws or jacket join." translation="전단 맞춤 연결&#xA;큰 힘을 가하지 않고 끼움&#xA;윤활 작업 후에 수동으로 구성요소를 이동할 수 있음&#xA;약간 분해된 부분, 확장 링,&#xA;피벗, 나사 또는 재킷 접합으로 샤프트에 고정된&#xA;농기계 구성요소."/>
	<label commandName="TIP_DESC_H7G6" devLabel="Sliding fit not intended to run freely, but to move and turn freely and locate accurately." translation="슬라이딩 맞춤은 자유롭게 실행되지는 않지만 쉽게 이동하고 회전하며 정확한 위치를 위한 옵션입니다."/>
	<label commandName="TIP_DESC_H7H6" devLabel="Locational clearance fit provides snug fit for&#xA;locating stationary parts&#xA;can be freely assembled and disassembled." translation="위치별 틈새 맞춤은 고정 부품을 정확히&#xA;위치시키면서도 자유롭게&#xA;조립 및 분해할 수 있습니다."/>
	<label commandName="TIP_DESC_H7J6" devLabel="Shift pressure connection with small clearance and imperceptible interference&#xA;Assembled by hand&#xA;Used for easily disassemble joints of gears, pulleys, sleeves, etc." translation="작은 틈새 및 아주 적은 간섭을 사용한 전위 압력 연결&#xA;수작업으로 조립됨&#xA;기어, 풀리, 슬리브 등의 접합을 쉽게 분해하는 데 사용됨."/>
	<label commandName="TIP_DESC_H7JS6" devLabel="Shift pressure connection with small clearance and imperceptible interference&#xA;Assembled by hand&#xA;Used for easily disassemble joints of gears, pulleys, sleeves, etc." translation="작은 틈새 및 아주 적은 간섭을 사용한 전위 압력 연결&#xA;수작업으로 조립됨&#xA;기어, 풀리, 슬리브 등의 접합을 쉽게 분해하는 데 사용됨."/>
	<label commandName="TIP_DESC_H7K6" devLabel="Locational transition fit for accurate location,&#xA;a compromise between clearance and interference." translation="위치별 변이 맞춤은 위치 정확도가 필요한 경우 사용되며, 틈새 및 간섭 사이에 절충합니다."/>
	<label commandName="TIP_DESC_H7N6" devLabel="Locational transition fit for more accurate&#xA;location where greater interference is permissible." translation="위치별 변이 맞춤은 더 높은 위치 정확도가 필요하고, 더 강한 간섭이 허용되는 경우 사용됩니다."/>
	<label commandName="TIP_DESC_H7P6" devLabel="Locational interference fit for parts requiring rigidity&#xA;and alignment with prime accuracy of location&#xA;but without special bore pressure requirements." translation="위치별 간섭 맞춤은 강성 및&#xA;최고의 위치 정확도를 요구하지만,&#xA;특별한 압입 압력 요건은 필요하지 않은 부품에 사용됩니다."/>
	<label commandName="TIP_DESC_H7R6" devLabel="Pressure connection with middle interference&#xA;Assembled using heavy force. Different&#xA;temperatures of hole and shaft is proffered.&#xA;Used for hubs of clutch discs or bearing sleeves" translation="중간 간섭을 사용한 압력 연결&#xA;강한 힘을 사용하여 조립됨. 홀&#xA; 및 샤프트의 다른 온도가 제공됨.&#xA;베어링 슬리브 또는 클러치 디스크의 허브에 사용됨"/>
	<label commandName="TIP_DESC_H7S6" devLabel="Medium drive fit for ordinary steel parts or shrink fits&#xA;on light sections, the tightest fit usable with cast iron." translation="중간 연동 맞춤은 일반 강 부품 또는 가벼운 단면의 억지 끼워 맞춤에 사용되며, 주철에 사용할 수 있는 가장 단단한 맞춤입니다."/>
	<label commandName="TIP_DESC_H7U6" devLabel="Force fit suitable for parts which can be highly stressed or&#xA;for shrink fits where the heavy pressing forces required are impractical." translation="강제 맞춤은 높은 응력을 받을 수 있는 부품 또는 무거운 압력이 알맞지 않은 억지 끼워 맞춤에 적합합니다."/>
	<label commandName="TIP_DESC_H8E8" devLabel="More clear rotary fit connections.&#xA;Assembly-with larger clearance.&#xA;Fit connections for long collated shafts, e.g. agricultural machines." translation="더 확실한 회전 맞춤 연결.&#xA;더 큰 틈새가 있는 조립품.&#xA;길게 합쳐진 샤프트를 위한 맞춤 연결(예: 농기계)."/>
	<label commandName="TIP_DESC_H8F7" devLabel="Close running fit for running on accurate machines&#xA;and for accurate location at moderate speeds and journal pressures." translation="가까운 실행 맞춤은 정밀한 기계류에서의 실행과&#xA;알맞은 속도 및 저널 압력에서의 위치 정확도가 필요한 경우 사용됩니다."/>
	<label commandName="TIP_DESC_H8U8" devLabel="Pressure connection with a large interference&#xA;Assembled using heavy force at different component temperatures&#xA;Used for hubs of gears or flanges connected to the shaft" translation="높은 간섭을 사용한 압력 연결&#xA;다른 구성요소 온도에서 강한 힘을 사용하여 조립됨&#xA;샤프트에 연결된 플랜지 또는 기어 허브에 사용됨"/>
	<label commandName="TIP_DESC_H8X8" devLabel="Pressure connection with a large interference&#xA;Assembled using heavy force at different component temperatures&#xA;Used for hubs of gears or flanges connected to the shaft." translation="높은 간섭을 사용한 압력 연결&#xA;다른 구성요소 온도에서 강한 힘을 사용하여 조립됨&#xA;샤프트에 연결된 플랜지 또는 기어 허브에 사용됨."/>
	<label commandName="TIP_DESC_H9D9" devLabel="Free running fit not for use where accuracy is essential,&#xA;but good for large temperature variations, high running speeds,&#xA;or heavy journal pressures." translation="자유 실행 맞춤은 정확도가 필수인 경우에는 사용되지 않지만,&#xA;큰 온도 변이, 높은 실행 속도 또는&#xA;무거운 저널 압력에는 적합합니다."/>
	<label commandName="Table Settings" devLabel="Table Settings" translation="테이블 설정"/>
	<label commandName="TableDesc" devLabel="Shows the Table Object Properties" translation="테이블 객체 특성 표시"/>
	<label commandName="TableDirectionInput" devLabel="Table Direction" translation="테이블 방향"/>
	<label commandName="TableHeader" devLabel="Table Header" translation="테이블 헤더"/>
	<label commandName="TableStructureInput" devLabel="Structure" translation="구조"/>
	<label commandName="TableToolTip" devLabel="Table" translation="테이블"/>
	<label commandName="TangencyPointPriorityAlgo" devLabel="G1 Continuity Algorithm" translation="G1 연속성 알고리즘"/>
	<label commandName="TangentEdge" devLabel="Tangent Edges" translation="접선 모서리"/>
	<label commandName="TangentEdgeColorButton" devLabel="Select Color" translation="색상 선택"/>
	<label commandName="TangentEdgeColorInput" devLabel="Color" translation="색상"/>
	<label commandName="TangentEdgeDesc" devLabel="Controls the display style for tangent edges." translation="접하는 모서리의 표시 스타일을 조정합니다."/>
	<label commandName="TangentEdges" devLabel="Tangent Edges" translation="접하는 모서리"/>
	<label commandName="TaperSlopeCalculated" devLabel=" &lt;Calculated&gt;" translation=" &lt;계산됨&gt;"/>
	<label commandName="TechnicalRef" devLabel="Technical reference" translation="기술적 참조"/>
	<label commandName="TemplateBaseDocument" devLabel="Template" translation="템플릿"/>
	<label commandName="TemplateGroup" devLabel="Template Setings" translation="템플릿 설정"/>
	<label commandName="TemplateSheetName_Assembly" devLabel="Assembly" translation="조립품"/>
	<label commandName="TemplateSheetName_AssemblyInstruction" devLabel="Assembly Instruction" translation="조립품 지침"/>
	<label commandName="TemplateSheetName_Component" devLabel="Component Detail" translation="구성요소 상세 정보"/>
	<label commandName="TemplateSheetName_SheetMetal" devLabel="Sheet Metal Detail" translation="판금 상세 정보"/>
	<label commandName="TextAdd" devLabel="" translation=""/>
	<label commandName="TextAlignment" devLabel="Text Alignment" translation="텍스트 정렬"/>
	<label commandName="TextBold" devLabel="Bold" translation="굵게"/>
	<label commandName="TextColor" devLabel="Color" translation="색상"/>
	<label commandName="TextColorTooltip" devLabel="Select Color" translation="색상 선택"/>
	<label commandName="TextCommands" devLabel="Text Commands" translation="텍스트 명령"/>
	<label commandName="TextDesign" devLabel="Design" translation="디자인"/>
	<label commandName="TextFont" devLabel="Font" translation="글꼴"/>
	<label commandName="TextHeight" devLabel="Height" translation="높이"/>
	<label commandName="TextHeightCustom" devLabel="Custom" translation="사용자화"/>
	<label commandName="TextHeightLarge" devLabel="Large" translation="큰"/>
	<label commandName="TextHeightMedium" devLabel="Medium" translation="중간"/>
	<label commandName="TextHeightSmall" devLabel="Small" translation="작은"/>
	<label commandName="TextItalic" devLabel="Italic" translation="기울임꼴"/>
	<label commandName="TextProperty" devLabel="Property" translation="특성"/>
	<label commandName="TextSource" devLabel="Source" translation="원본"/>
	<label commandName="TextStyle" devLabel="" translation=""/>
	<label commandName="TextType" devLabel="Type" translation="유형"/>
	<label commandName="TextUnderline" devLabel="Underline" translation="밑줄"/>
	<label commandName="Thick" devLabel="Thick" translation="두꺼움"/>
	<label commandName="Thick_Linewidth" devLabel="(Thick)" translation="(두꺼움)"/>
	<label commandName="Thin" devLabel="Thin" translation="얇음"/>
	<label commandName="Thin_Linewidth" devLabel="(Thin)" translation="(얇음)"/>
	<label commandName="ThreadEdges" devLabel="Thread Edges" translation="스레드 모서리"/>
	<label commandName="ThreadEdgesDesc" devLabel="Displays threads on threaded edges." translation="스레드 모서리에 스레드를 표시합니다."/>
	<label commandName="ThreeEdgesIntersectionDimPriorityAlgo" devLabel="Three Edges Intersection DimPriority Algorithm" translation="세 모서리 교차 치수 우선순위 알고리즘"/>
	<label commandName="Tidy Up Restricted Message" devLabel="Auto-align your notes, tables, and dimensions so that you can improve your design efficiency." translation="주, 테이블 및 치수를 자동으로 정렬하여 디자인 효율성을 높일 수 있습니다."/>
	<label commandName="Tidy Up Restricted Title" devLabel="Tidy Up" translation="정리"/>
	<label commandName="Title1" devLabel="Title" translation="제목"/>
	<label commandName="Title2" devLabel="" translation=""/>
	<label commandName="Title3" devLabel="" translation=""/>
	<label commandName="TitleBlockAttributesGroup" devLabel="Attributes" translation="속성"/>
	<label commandName="TitleBlockDeleteLogo" devLabel="Delete Image" translation="이미지 삭제"/>
	<label commandName="TitleBlockInsertLogo" devLabel="Insert Image" translation="이미지 삽입"/>
	<label commandName="TitleBlockLogoDistX" devLabel="X Distance" translation="X 거리"/>
	<label commandName="TitleBlockLogoDistY" devLabel="Y Distance" translation="Y 거리"/>
	<label commandName="TitleBlockLogoGroup" devLabel="Logo" translation="로고"/>
	<label commandName="TitleBlockLogoRotate" devLabel="Rotate" translation="회전"/>
	<label commandName="TitleBlockLogoScale" devLabel="Scale" translation="축척"/>
	<label commandName="TitleBlockProject" devLabel="Project" translation="프로젝트"/>
	<label commandName="TitleBlocksTable" devLabel="Title Blocks Table" translation="제목 블록 테이블"/>
	<label commandName="ToLinkFile" devLabel="Link File" translation="링크 파일"/>
	<label commandName="ToProceed" devLabel="Proceed Anyway" translation="계속 진행"/>
	<label commandName="ToggleOtherGeometry" devLabel="Toggle Other Geometry" translation="다른 형상 전환"/>
	<label commandName="TogglePaletteBorder" devLabel="Toggle Palette Border" translation="팔레트 경계 전환"/>
	<label commandName="TogglePaletteGrid" devLabel="Toggle Palette Grid" translation="팔레트 그리드 전환"/>
	<label commandName="TogglePaletteSheet" devLabel="Toggle Palette Sheet" translation="팔레트 시트 전환"/>
	<label commandName="TogglePaletteSnap" devLabel="Toggle Palette Snap" translation="팔레트 스냅 전환"/>
	<label commandName="ToolTip_HelpButton" devLabel=" More Information. " translation=" 자세한 내용. "/>
	<label commandName="ToolTip_NumberOfCopiesLabel" devLabel=" &lt;b&gt;Number of Copies&lt;/b&gt; &lt;br&gt; Define the number of copies to be &#xA; printed for each sheet." translation=" &lt;b&gt;인쇄 매수&lt;/b&gt; &lt;br&gt; 각 시트에 대해 인쇄할 인쇄 매수를 &#xA; 정의합니다."/>
	<label commandName="ToolTip_OffsetLabel" devLabel=" &lt;b&gt;OffSet&lt;/b&gt; &lt;br&gt; Offset the contents of your print. " translation=" &lt;b&gt;간격띄우기&lt;/b&gt; &lt;br&gt; 인쇄물의 내용을 간격띄우기합니다. "/>
	<label commandName="ToolTip_Offset_XEdit" devLabel=" Specify the horizontal offset &#xA; from left bottom corner." translation=" 왼쪽 저면도 코너에서의 &#xA; 수평 간격띄우기를 지정합니다."/>
	<label commandName="ToolTip_Offset_YEdit" devLabel=" Specify the vertical offset &#xA; from left bottom corner." translation=" 왼쪽 저면도 코너에서의 &#xA; 수직 간격띄우기를 지정합니다."/>
	<label commandName="ToolTip_OrientationLabel" devLabel=" &lt;b&gt;Orientation&lt;/b&gt; &lt;br&gt; Choose whether the orientation of the &#xA; print will be portrait or landscape." translation=" &lt;b&gt;방향&lt;/b&gt; &lt;br&gt; 인쇄 방향을 세로 또는 가로 중에서 &#xA; 선택합니다."/>
	<label commandName="ToolTip_Orientation_LandscapeButton" devLabel=" Landscape mode. " translation=" 가로 모드. "/>
	<label commandName="ToolTip_Orientation_PotrateButton" devLabel=" Portrait mode. " translation=" 세로 모드. "/>
	<label commandName="ToolTip_PaperSizeLabel" devLabel=" &lt;b&gt;Paper Size&lt;/b&gt; &lt;br&gt; Select the paper size to use to print &#xA; your drawings." translation=" &lt;b&gt;용지 크기&lt;/b&gt; &lt;br&gt;도면을 인쇄하는 데 사용할 용지 크기를 &#xA; 선택합니다."/>
	<label commandName="ToolTip_PrintLineWidthsLabel" devLabel=" &lt;b&gt;Print Line Widths&lt;/b&gt; &lt;br&gt; Choose whether or not lines will be &#xA; printed with their assigned line &#xA; widths." translation=" &lt;b&gt;인쇄 선 폭&lt;/b&gt; &lt;br&gt; 지정된 선 폭으로 선을 인쇄할지 &#xA; 여부를 &#xA; 선택합니다."/>
	<label commandName="ToolTip_PrintPreviewLabel" devLabel=" &lt;b&gt;Preview&lt;/b&gt; &lt;br&gt; Toggles the visibility of the preview &#xA; pane." translation=" &lt;b&gt;미리보기&lt;/b&gt; &lt;br&gt; 미리보기 창의 가시성을 &#xA; 전환합니다."/>
	<label commandName="ToolTip_PrintRange_AllSheetsLabel" devLabel=" &lt;b&gt;Print Range: All Sheets &lt;/b&gt; &lt;br&gt; Will print all sheets within the &#xA; currently opened drawing." translation=" &lt;b&gt;인쇄 범위: 모든 시트&lt;/b&gt; &lt;br&gt; 현재 열려 있는 도면 내의 모든 &#xA; 시트를 인쇄합니다."/>
	<label commandName="ToolTip_PrintRange_CurrentSheetLabel" devLabel=" &lt;b&gt;Print Range: Current Sheet&lt;/b&gt; &lt;br&gt; Will Print the current (active) sheet of &#xA; the open drawing." translation=" &lt;b&gt;인쇄 범위: 현재 시트&lt;/b&gt; &lt;br&gt;열려 있는 도면의 현재(활성) 시트를 &#xA; 인쇄합니다."/>
	<label commandName="ToolTip_PrintRange_SheetsInRangeLabel" devLabel=" &lt;b&gt;Print Range: Sheets in Range&lt;/b&gt; &lt;br&gt;Will print a range of sheets in the &#xA; currently opened drawing. The sheets &#xA; can be adjacent or not." translation=" &lt;b&gt;인쇄 범위:시트 범위 &lt;/b&gt; &lt;br&gt;현재 열려 있는 도면의 시트 &#xA; 범위를 인쇄합니다. 시트는 인접할 수도 있고 &#xA; 그렇지 않을 수도 있습니다."/>
	<label commandName="ToolTip_PrinterNameLabel" devLabel=" &lt;b&gt;Printer Name&lt;/b&gt; &lt;br&gt; Select the printer to use. " translation=" &lt;b&gt;프린터 이름&lt;/b&gt; &lt;br&gt; 사용할 프린터를 선택합니다. "/>
	<label commandName="ToolTip_PropertiesButton" devLabel=" Additional printer Properties. " translation=" 추가 프린터 특성입니다. "/>
	<label commandName="ToolTip_ScaleLabel" devLabel=" &lt;b&gt;Scale&lt;/b&gt; &lt;br&gt; Choose or set the scale to print the &#xA; selected sheets." translation=" &lt;b&gt;축척&lt;/b&gt; &lt;br&gt; 선택한 시트를 인쇄할 축척을 선택하거나 &#xA; 설정합니다."/>
	<label commandName="Tooltip" devLabel="" translation=""/>
	<label commandName="Top" devLabel="Top" translation="상단"/>
	<label commandName="TopLeft" devLabel="TopLeft" translation="상단 왼쪽"/>
	<label commandName="TopRight" devLabel="TopRight" translation="상단 오른쪽"/>
	<label commandName="TransformPointToPoint" devLabel="Transform" translation="변환"/>
	<label commandName="TransformSelectionInput" devLabel="Selection" translation="선택"/>
	<label commandName="TurnedComponentDimPriorityAlgo" devLabel="Turned Component Dim Priority Algorithm" translation="회전된 구성요소 치수 우선순위 알고리즘"/>
	<label commandName="TweakTrailColorButton" devLabel="Select Color" translation="색상 선택"/>
	<label commandName="TweakTrailColorInput" devLabel="Color" translation="색상"/>
	<label commandName="Type" devLabel="Type" translation="유형"/>
	<label commandName="UCAError" devLabel="Can't check the status of external references right now." translation="지금은 외부 참조의 상태를 확인할 수 없습니다."/>
	<label commandName="UCAOfflineQAT" devLabel="You are working offline. Changes to external references won't be synced." translation="오프라인으로 작업 중입니다. 외부 참조에 대한 변경 사항은 동기화되지 않습니다."/>
	<label commandName="UCAOfflineToolbar" devLabel="Not available while offline." translation="오프라인 상태에서는 사용할 수 없습니다."/>
	<label commandName="UPDATEPROP" devLabel="Updating properties... " translation="특성 업데이트 중... "/>
	<label commandName="Undefined Size" devLabel="Undefined Size" translation="정의되지 않은 크기"/>
	<label commandName="UndoCommand" devLabel="Undo" translation="명령취소"/>
	<label commandName="UndoCommandDesc" devLabel="Undo" translation="명령취소"/>
	<label commandName="UniqueSectionGeneratorAlgorithm" devLabel="Unique Section Generator Algorithm" translation="고유 단면 생성기 알고리즘"/>
	<label commandName="UniqueSectionPriorityReducingAlgo" devLabel="Unique Section Dim Priority Reducing Algorithm" translation="고유 단면 치수 우선순위 감소 알고리즘"/>
	<label commandName="Update2NonMilestoneFromMilestone" devLabel="No new milestones available. Do you want to update the referenced design to the latest version?" translation="사용 가능한 새 이정표가 없습니다. 참조된 설계를 최신 버전으로 업데이트하시겠습니까?"/>
	<label commandName="Update2NonMilestoneFromMilestone_ccy" devLabel="No new versions available. Do you want to update the referenced design to the latest change?" translation="사용 가능한 새 버전이 없습니다. 참조된 디자인을 최신 변경 사항으로 업데이트하시겠습니까?"/>
	<label commandName="UpdateToSelectedTemplate" devLabel="Update to Selected Template" translation="선택한 템플릿으로 업데이트"/>
	<label commandName="UpperLimit" devLabel="Upper Limit" translation="상한"/>
	<label commandName="UseDocumentSetting" devLabel="Use Document Settings" translation="문서 설정 사용"/>
	<label commandName="UseModelSetting" devLabel="Use Model Settings" translation="모형 설정 사용"/>
	<label commandName="VIA_PAIRS_TABLE_TITLE" devLabel="Via Pairs" translation="Via 쌍"/>
	<label commandName="VersionComponentsSelInput" devLabel="Components" translation="구성요소"/>
	<label commandName="VersionExistsLabelStr" devLabel=" exists)" translation=" 있음)"/>
	<label commandName="VersionLabelStr" devLabel=" Version: " translation=" 버전: "/>
	<label commandName="VersionOutdatedStr" devLabel="Drawing is out of date; it's referencing an older version of the design. &#xA;&#xA;Click to update the drawing to the latest version." translation="도면 파일이 오래된 상태이며 이전 버전의 설계를 참조하고 있습니다. &#xA;&#xA;도면을 최신 버전으로 업데이트하려면 클릭하십시오."/>
	<label commandName="VersionOutdatedStr_ccy" devLabel="Drawing is out of date; it's referencing a previous change to the design. &#xA;&#xA;Click to update the drawing to the latest change." translation="도면이 오래되었으며, 디자인에 대한 이전 변경 사항을 참조합니다. &#xA;&#xA;도면을 최신 변경 사항으로 업데이트하려면 클릭하십시오."/>
	<label commandName="VersionUnavailableNowStr" devLabel="&#xA;Version information unavailable at the moment" translation="&#xA;현재 버전 정보를 사용할 수 없음"/>
	<label commandName="VersionUnavailableNowStr1" devLabel=" Version information unavailable at the moment" translation=" 현재 버전 정보를 사용할 수 없음"/>
	<label commandName="VersionUnavailableNowStr1_ccy" devLabel=" Change information unavailable at the moment" translation=" 현재 변경 사항 정보를 사용할 수 없습니다."/>
	<label commandName="VersionUnavailableNowStr_ccy" devLabel="Change information unavailable at the moment" translation="현재 변경 정보를 사용할 수 없음"/>
	<label commandName="VersionUnavailableStr" devLabel="&#xA;Version information unavailable offline" translation="&#xA;오프라인에서 버전 정보를 사용할 수 없음"/>
	<label commandName="VersionUnavailableStr_ccy" devLabel="Change information unavailable offline" translation="오프라인에서 변경 정보를 사용할 수 없음"/>
	<label commandName="VersionUpdatedStr" devLabel="Drawing is up to date; it's referencing the latest version of the design." translation="도면이 최신 상태이며 최신 버전의 설계를 참조하고 있습니다."/>
	<label commandName="VersionUpdatedStr_ccy" devLabel="Drawing is up to date; it's referencing the latest change to the design." translation="도면이 최신 버전입니다. 디자인에 대한 최신 변경 사항을 참조합니다."/>
	<label commandName="VerticalBaseLineDimGenAlgorithm" devLabel="Vertical Base Line Dim Algorithm" translation="수직 기준선 치수 알고리즘"/>
	<label commandName="VerticalChainDimGenAlgorithm" devLabel="Vertical Chain Dim Algorithm" translation="수직 체인 치수 알고리즘"/>
	<label commandName="VeryThick" devLabel="Very Thick" translation="매우 두꺼움"/>
	<label commandName="VeryThin" devLabel="Very Thin" translation="매우 얇음"/>
	<label commandName="ViaPairsTableTip" devLabel="Creates via pairs table." translation="Via 쌍 테이블을 작성합니다."/>
	<label commandName="ViewDefaultAnimation" devLabel="Animation" translation="애니메이션"/>
	<label commandName="ViewDefaultAssembly" devLabel="Assembly" translation="조립품"/>
	<label commandName="ViewDefaultComponent" devLabel="Component" translation="구성요소"/>
	<label commandName="ViewDefaultFolded" devLabel="Sheet Metal: Folded" translation="판금: 접힌 패턴"/>
	<label commandName="ViewDefaultGroup" devLabel="Drawing View Defaults" translation="도면 뷰 기본값"/>
	<label commandName="ViewDefaultPadding" devLabel="View Default Padding val * textHeight" translation="뷰 기본 채우기 값 * 문자 높이"/>
	<label commandName="ViewDefaultStyleGroup" devLabel="Drawing View" translation="도면 뷰"/>
	<label commandName="ViewDefaultStyleGroupDesc" devLabel="Controls the drawing view settings such as style, edge visibility, center marks, and center lines creation." translation="스타일, 모서리 가시성, 중심 표식 및 중심선 작성과 같은 도면 뷰 설정을 조정합니다."/>
	<label commandName="ViewDefaultSubAssembly" devLabel="Sub Assembly" translation="부분조립품"/>
	<label commandName="ViewDefaultType" devLabel="Type" translation="유형"/>
	<label commandName="ViewDefaultsTabToolipBase" devLabel="View Defaults" translation="뷰 기본값"/>
	<label commandName="ViewDefaultsTabToolipDesc" devLabel="Shows the drawing view default settings" translation="도면 뷰 기본 설정을 표시합니다."/>
	<label commandName="ViewDesc" devLabel="Shows the View Object Properties" translation="객체 특성 보기 표시"/>
	<label commandName="ViewLabelColorButton" devLabel="Select Color" translation="색상 선택"/>
	<label commandName="ViewLabelColorInput" devLabel="Color" translation="색상"/>
	<label commandName="ViewMsgSeparator" devLabel="View Message Separator" translation="메시지 구분 기호 보기"/>
	<label commandName="ViewNestCorner" devLabel="View Nest corner 0UL 1UR 2LL 3LR 4UC 5LC 6MC" translation="뷰 내포 코너 0UL 1UR 2LL 3LR 4UC 5LC 6MC"/>
	<label commandName="ViewNestDirection" devLabel="View Nest Direction 0-HZ" translation="뷰 내포 방향 0-HZ"/>
	<label commandName="ViewPreference_ASME" devLabel="Auto View Preference 0T 1L 2B 3R" translation="자동 뷰 기본 설정 0T 1L 2B 3R"/>
	<label commandName="ViewPreference_ISO" devLabel="Auto View Preference 0T 1L 2B 3R" translation="자동 뷰 기본 설정 0T 1L 2B 3R"/>
	<label commandName="ViewSetOptionTooltip" devLabel="&lt;b&gt;View&lt;/b&gt;&lt;br&gt;&lt;br&gt;Switches the configuration for the selected view and all of its dependent views." translation="&lt;b&gt;뷰&lt;/b&gt;&lt;br&gt;&lt;br&gt;선택한 뷰와 모든 종속 뷰의 구성을 전환합니다."/>
	<label commandName="ViewStyle" devLabel="Style" translation="스타일"/>
	<label commandName="ViewToolTip" devLabel="View" translation="뷰"/>
	<label commandName="VisibleAndHiddenEdge" devLabel="Visible and Hidden Edges" translation="가시적 모서리 및 숨겨진 모서리"/>
	<label commandName="VisibleEdges" devLabel="Visible Edges" translation="가시적 모서리"/>
	<label commandName="VisibleOuterLineColorButton" devLabel="Select Color" translation="색상 선택"/>
	<label commandName="VisibleOuterLineColorInput" devLabel="Color" translation="색상"/>
	<label commandName="Weight" devLabel="Weight" translation="가중치"/>
	<label commandName="WeldOptions" devLabel="Options" translation="옵션"/>
	<label commandName="WeldSymReset" devLabel="Reset" translation="재설정"/>
	<label commandName="WeldSymResetDesc" devLabel="Reset all properties to default values" translation="모든 특성을 기본값으로 재설정"/>
	<label commandName="WeldSymTabBar" devLabel="Tab Bar" translation="탭 막대"/>
	<label commandName="WeldSymTailDesc" devLabel="Show tail properties" translation="가로선 특성 표시"/>
	<label commandName="WeldSymTailToolTip" devLabel="Tail" translation="가로선"/>
	<label commandName="Wide" devLabel="Wide" translation="넓은"/>
	<label commandName="WorkSheet" devLabel="Worksheet" translation="워크시트"/>
	<label commandName="Yes" devLabel="Yes" translation="예"/>
	<label commandName="addRevision" devLabel="Add Revision" translation="리비전 추가"/>
	<label commandName="addRevisionRow" devLabel="Add Revision Row" translation="리비전 행 추가"/>
	<label commandName="alignLeft" devLabel="Left" translation="왼쪽"/>
	<label commandName="alignRight" devLabel="Right" translation="오른쪽"/>
	<label commandName="autoCenterGroup" devLabel="Automated Center Marks and Center Lines" translation="자동화된 중심 표식 및 중심선"/>
	<label commandName="autoPreferencesMsg" devLabel="Create sheets for assembly, subassembly, components, folded sheet metal, flat pattern sheet metal.&#xA;" translation="조립품, 부분조립품, 구성요소, 접힌 판금, 플랫 패턴 판금에 대한 시트를 작성합니다.&#xA;"/>
	<label commandName="bottomCenter" devLabel="Bottom Center" translation="저면도 중심"/>
	<label commandName="bottomLeft" devLabel="Bottom Left" translation="저면도 왼쪽"/>
	<label commandName="bottomRight" devLabel="Bottom Right" translation="저면도 오른쪽"/>
	<label commandName="bottomToTop" devLabel="Up" translation="위쪽"/>
	<label commandName="breakoutInheritance" devLabel="Inherit Breakout" translation="브레이크 아웃 상속"/>
	<label commandName="cancelCreateDrawing" devLabel="Cancel" translation="취소"/>
	<label commandName="centerText" devLabel="Center" translation="중심"/>
	<label commandName="cm" devLabel="cm" translation="cm"/>
	<label commandName="columnVisibility" devLabel="Toggle Column Visibility" translation="열 가시성 전환"/>
	<label commandName="createLayerStackTable" devLabel="Layer Stack" translation="도면층 스택"/>
	<label commandName="cutCheckBoxes" devLabel="Check Boxes for Participants" translation="관계부품의 확인란"/>
	<label commandName="cutParticipantTable" devLabel="Cut Participant Table" translation="관계부품 테이블 잘라내기"/>
	<label commandName="cutTableGroup" devLabel="Objects To Cut" translation="절단할 객체"/>
	<label commandName="deleteColumn" devLabel="Delete Selected Columns" translation="선택한 열 삭제"/>
	<label commandName="deleteRevision" devLabel="Delete Revision" translation="리비전 삭제"/>
	<label commandName="deleteRevisiontooltip" devLabel="Delete Selected Revision Row" translation="선택한 리비전 행 삭제"/>
	<label commandName="deleteRow" devLabel="Delete Selected Rows" translation="선택한 행 삭제"/>
	<label commandName="department" devLabel="Dept." translation="부서"/>
	<label commandName="designFile" devLabel="Design File" translation="디자인 파일"/>
	<label commandName="displayAllInTable" devLabel="All" translation="모두"/>
	<label commandName="displayCustomInTable" devLabel="Custom" translation="사용자화"/>
	<label commandName="displayFiveInTable" devLabel="05" translation="05"/>
	<label commandName="displayFourInTable" devLabel="04" translation="04"/>
	<label commandName="displayOneInTable" devLabel="01" translation="01"/>
	<label commandName="displayThreeInTable" devLabel="03" translation="03"/>
	<label commandName="displayTwoInTable" devLabel="02" translation="02"/>
	<label commandName="drawingAanimationUnvalilableLCLZ" devLabel="Unavailable because %1% is an electronic design." translation="%1%은(는) 전자 디자인이므로 사용할 수 없습니다."/>
	<label commandName="drawingAnimationLCLZ" devLabel="Creates a drawing to document the storyboard of the current design as an exploded view." translation="현재 디자인의 스토리보드를 분해된 뷰로 문서화할 도면을 작성합니다."/>
	<label commandName="drawingAutomateLCLZ" devLabel="Automatically generate 2D drawings for the active design." translation="활성 디자인에 대한 2D 도면을 자동으로 생성합니다."/>
	<label commandName="drawingDesignLCLZ" devLabel="Creates a drawing to document the current design." translation="도면을 작성하여 현재 디자인을 문서화합니다."/>
	<label commandName="drawingGeneralLCLZ" devLabel="Creates a set of sheets that document the active design with scaled 2D orthographic and isometric views, annotations, and tables to aid in manufacturing." translation="제조에 도움이 되는 축척된 2D 직교 및 등각투영 뷰, 주석 및 테이블을 사용하여 활성 디자인을 문서화하는 시트 세트를 작성합니다."/>
	<label commandName="drawingTemplateLCLZ" devLabel="Creates a template that stores title blocks, borders, document settings, sheet settings, views, part lists, and text for use in future drawings." translation="향후 도면에서 사용할 제목 블록, 경계, 문서 설정, 시트 설정, 뷰, 부품 리스트 및 텍스트를 저장하는 템플릿을 작성합니다."/>
	<label commandName="drawingUnavailable2LCLZ" devLabel="Unavailable because there is no active design. Open a design, then create a drawing." translation="활성 디자인이 없기 때문에 사용할 수 없습니다. 디자인을 연 다음 도면을 작성합니다."/>
	<label commandName="drawingUnavailableEIPLCLZ" devLabel="Unavailable because Edit In Place is active the current design. Finish the Edit In Place session, then create a drawing." translation="내부 편집이 현재 디자인에 활성화되어 있으므로 사용할 수 없습니다. 내부 편집 세션을 마친 다음 도면을 작성합니다."/>
	<label commandName="drawingUnavailableLCLZ" devLabel="Unavailable because the active design is a drawing. Open a design, then create a drawing." translation="활성 디자인이 도면이므로 사용할 수 없습니다. 디자인을 연 다음 도면을 작성합니다."/>
	<label commandName="dwgExtension" devLabel=".dwg" translation=".dwg"/>
	<label commandName="dxfExtension" devLabel=".dxf" translation=".dxf"/>
	<label commandName="editColumns" devLabel="Edit Columns" translation="열 편집"/>
	<label commandName="editRows" devLabel="Edit Rows" translation="행 편집"/>
	<label commandName="electronicsDesignNotOpen" devLabel="Electronics Design is not open" translation="전자 제품 디자인이 열려 있지 않습니다."/>
	<label commandName="ellipse" devLabel="Ellipse" translation="타원"/>
	<label commandName="fd_buttonAbort" devLabel="Abort" translation="중단"/>
	<label commandName="fd_buttonIgnore" devLabel="Ignore" translation="무시"/>
	<label commandName="fd_buttonRetry" devLabel="Retry" translation="재시도 (R)"/>
	<label commandName="fd_button_continue" devLabel="Continue" translation="계속"/>
	<label commandName="fd_button_try_again" devLabel="Try Again" translation="다시 시도"/>
	<label commandName="filletMaxRad" devLabel="Maximum fillet radius" translation="최대 모깎기 반지름"/>
	<label commandName="filletMinRad" devLabel="Minimum fillet radius" translation="최소 모깎기 반지름"/>
	<label commandName="ft" devLabel="ft" translation="피트"/>
	<label commandName="half depth" devLabel="Measure Half Depth" translation="절반 깊이 측정"/>
	<label commandName="in" devLabel="in" translation="인치"/>
	<label commandName="infoBreakInheritance_All" devLabel="Inherit All" translation="모두 상속"/>
	<label commandName="infoBreakInheritance_None" devLabel="Inherit None" translation="상속 없음"/>
	<label commandName="infoBreakInheritance_Visible" devLabel="Inherit Visible" translation="가시적인 항목 상속"/>
	<label commandName="insertColumnToLeft" devLabel="Insert Columns To Left" translation="왼쪽에 열 삽입"/>
	<label commandName="insertColumnToRight" devLabel="Insert Columns To Right" translation="오른쪽에 열 삽입"/>
	<label commandName="insertRowAbove" devLabel="Insert Rows Above" translation="위에 행 삽입"/>
	<label commandName="insertRowBelow" devLabel="Insert Rows Below" translation="아래에 행 삽입"/>
	<label commandName="itemAddBreak" devLabel="Add Break" translation="끊기 추가"/>
	<label commandName="itemDown" devLabel="Down" translation="아래로"/>
	<label commandName="itemRemoveBreak" devLabel="Remove Break" translation="끊기 제거"/>
	<label commandName="itemUP" devLabel="Up" translation="위쪽"/>
	<label commandName="justify" devLabel="Justify" translation="자리맞추기"/>
	<label commandName="layerStackTableCmd" devLabel="Layer Stack Table" translation="도면층 스택 테이블"/>
	<label commandName="layerStackTableCmdBlock" devLabel="Layer Stack Table (unavailable)" translation="도면층 스택 테이블(사용할 수 없음)"/>
	<label commandName="layerStackTableCmdBlockToolTip" devLabel="Layer Stack Table is not available when there is no linked 2D PCB in the Electronics Design. &#xA;To use electronics data in a drawing, first link a 2D PCB to the Electronics Design." translation="전자 제품 디자인에 링크된 2D PCB가 없으면 도면층 스택 테이블을 사용할 수 없습니다. &#xA;도면에서 전자 제품 데이터를 사용하려면 먼저 2D PCB를 전자 제품 디자인에 링크합니다."/>
	<label commandName="layerStackTableCmdToolTip" devLabel="Creates a table based on the PCB Layer Stack.&#xA;Select between Layer Stack and Via Pairs, name the table, then adjust table columns. Leader lines are automatically added to associated diagram." translation="PCB 도면층 스택을 기반으로 테이블을 작성합니다.&#xA;도면층 스택과 Via 쌍 중에서 선택하고 테이블 이름을 지정한 후, 테이블 열을 조정합니다. 지시선은 연관된 다이어그램에 자동으로 추가됩니다."/>
	<label commandName="layerStackViewCmd" devLabel="Layer Stack View" translation="도면층 스택 뷰"/>
	<label commandName="layerStackViewCmdBlock" devLabel="Layer Stack View (unavailable)" translation="도면층 스택 뷰(사용할 수 없음)"/>
	<label commandName="layerStackViewCmdBlockToolTip" devLabel="Layer Stack View is not available when there is no linked 2D PCB in the Electronics Design. &#xA;&#xA;To use electronics data in a drawing, first link a 2D PCB to the Electronics Design." translation="전자 제품 디자인에 링크된 2D PCB가 없으면 도면층 스택 뷰를 사용할 수 없습니다. &#xA;&#xA;도면에서 전자 제품 데이터를 사용하려면 먼저 2D PCB를 전자 제품 디자인에 링크합니다."/>
	<label commandName="layerStackViewCmdToolTip" devLabel="Creates a view based on the PCBLayer Stack. Shows all layers of PCB and via pairs in abstract view. &#xA;&#xA;Place the view on the sheet. Can be used in combination with Layer Stack Table." translation="PCB 도면층 스택을 기준으로 뷰를 작성합니다. PCB 및 Via 쌍의 모든 도면층을 추상 뷰로 표시합니다. &#xA;&#xA;시트에 뷰를 배치합니다. 도면층 스택 테이블과 함께 사용할 수 있습니다."/>
	<label commandName="lclzAddSheet" devLabel="Quick Add" translation="빠른 추가"/>
	<label commandName="lclzAlreadyIsUse" devLabel="The name &quot;%1%&quot; is already is use. &#xA; You will need to enter a different name." translation="이름 &quot;%1%&quot;이(가) 이미 사용 중입니다. &#xA; 다른 이름을 입력해야 합니다."/>
	<label commandName="lclzAskIfNeedToGetLatest" devLabel="Version mismatch. Get Latest to proceed with view placement?" translation="버전이 일치하지 않습니다. 최신 버전을 가져와서 뷰 배치를 계속 진행하시겠습니까?"/>
	<label commandName="lclzAskIfNeedToGetLatest_ccy" devLabel="Change mismatch. Get Latest to proceed with view placement?" translation="변경 사항이 일치하지 않습니다. 뷰 배치를 계속하려면 최신 버전 가져오기를 선택하시겠습니까?"/>
	<label commandName="lclzAssign" devLabel="Assign" translation="할당"/>
	<label commandName="lclzAutomation" devLabel="Automation" translation="자동화"/>
	<label commandName="lclzBorderPalette" devLabel="Border" translation="경계"/>
	<label commandName="lclzBorderTab" devLabel="BORDER" translation="경계"/>
	<label commandName="lclzBreakViewDesc" devLabel="For better visibility, drag the break line grips to extend the break line. To delete the break, click to select either of the break lines and press the Delete key." translation="가시성을 개선하려면 절단선 그립을 끌어 절단선을 확장합니다. 끊기를 삭제하려면 절단선 중 하나를 클릭하여 선택하고 삭제 키를 누릅니다."/>
	<label commandName="lclzBreakViewTips" devLabel="To modify the break, click to select either of the break lines and drag to reposition. When you reposition the break lines, the view on either side of the break adjusts accordingly." translation="끊기를 수정하려면 절단선 중 하나를 클릭하여 선택한 다음 끌어서 재배치합니다. 절단선을 재배치하면 끊기 양쪽에 있는 뷰가 적절하게 조정됩니다."/>
	<label commandName="lclzBreakViewTipsAndTricksTitle" devLabel="Break View Information" translation="끊기 뷰 정보"/>
	<label commandName="lclzBrowse" devLabel="Browse..." translation="찾아보기..."/>
	<label commandName="lclzCalculating" devLabel="Calculating" translation="계산 중"/>
	<label commandName="lclzCannotFindTemplate" devLabel="The selected drawing template cannot be found." translation="선택한 도면 템플릿을 찾을 수 없습니다."/>
	<label commandName="lclzChangeSheetSettingDesc" devLabel="You can create as many title blocks as you need and switch between them. You can also toggle the border and title block on or off independently." translation="필요한 만큼 제목 블록을 작성하고 제목 블록 사이를 전환할 수 있습니다. 독립적으로 경계 및 제목 블록의 켜기 또는 끄기를 전환할 수도 있습니다."/>
	<label commandName="lclzChangeSheetSettingTips" devLabel="Change the sheet size and title block for the current drawing." translation="현재 도면의 시트 크기 및 제목 블록을 변경합니다."/>
	<label commandName="lclzChangeSheetSettingTipsAndTricksTitle" devLabel="Sheet Settings Information" translation="시트 설정 정보"/>
	<label commandName="lclzConstraints" devLabel="Constraints" translation="구속조건"/>
	<label commandName="lclzContainsUnsupportedChars" devLabel="The name contains unsupported characters" translation="이름에 지원되지 않는 문자가 포함됨"/>
	<label commandName="lclzCreate" devLabel="Create" translation="작성"/>
	<label commandName="lclzCurrentDrawing" devLabel="Current Drawing" translation="현재 도면"/>
	<label commandName="lclzCustomSketchSymbol" devLabel="Sketch Symbol" translation="스케치 기호"/>
	<label commandName="lclzDefaultDocumentName" devLabel="Untitled" translation="제목 없음"/>
	<label commandName="lclzDimensions" devLabel="Dimensions" translation="치수"/>
	<label commandName="lclzDrawingAutomationPreferenceCmd1" devLabel="Lets you set automation for this drawing template. Control view placement, dimensions, and sheet creation." translation="이 도면 템플릿에 대한 자동화를 설정할 수 있습니다. 뷰 배치, 치수 및 시트 작성을 제어합니다."/>
	<label commandName="lclzDrawingAutomationPreferenceCmd2" devLabel="Templates with placed views have only Auto Dimension preferences." translation="배치된 뷰가 있는 템플릿에는 자동 치수 기본 설정만 있습니다."/>
	<label commandName="lclzDrawingShowChangeAwarenessToolbarCmdText" devLabel="Change Summary" translation="변경 요약"/>
	<label commandName="lclzDrawingTemplate" devLabel="Drawing Template" translation="도면 템플릿"/>
	<label commandName="lclzDrawingType" devLabel="Drawing Type" translation="도면 유형"/>
	<label commandName="lclzDrawingsPropertyRefresh" devLabel="Refresh all the properties placed in drawing." translation="도면에 배치된 모든 특성을 새로 고칩니다."/>
	<label commandName="lclzECADNewDrawingDocumentCommand1" devLabel="Creates a drawing of the electronics design." translation="전자 제품 디자인의 도면을 작성합니다."/>
	<label commandName="lclzECADNewDrawingDocumentCommand2" devLabel="Place a view of the PCB. Place a diagram and table for the PCB Layer Stack." translation="PCB의 뷰를 배치합니다. PCB 도면층 스택에 대한 다이어그램 및 테이블을 배치합니다."/>
	<label commandName="lclzElectronicsCreate" devLabel="Create" translation="작성"/>
	<label commandName="lclzElectronicsTab" devLabel="ELECTRONICS" translation="전자 제품"/>
	<label commandName="lclzElectronicsTables" devLabel="Tables" translation="테이블"/>
	<label commandName="lclzExport" devLabel="Export" translation="내보내기"/>
	<label commandName="lclzExportFusionDrawingDXFDocument1" devLabel="Creates a DXF file of the current drawing." translation="현재 도면의 DXF 파일을 작성합니다."/>
	<label commandName="lclzExportFusionDrawingDocument1" devLabel="Creates a DWG file of the current drawing." translation="현재 도면의 DWG 파일을 작성합니다."/>
	<label commandName="lclzExportFusionDrawingTemplate1" devLabel="Creates a drawing template of the current drawing configuration that can be used when creating new drawings." translation="새 도면을 작성할 때 사용할 수 있는 현재 도면 구성의 도면 템플릿을 작성합니다."/>
	<label commandName="lclzExportFusionDrawingTemplate2" devLabel="A template retains the current drawing's drafting standard, annotation and sheet settings, title block, and border. All drawing views, associated annotations, and parts lists are removed." translation="템플릿에서는 현재 도면의 제도 표준, 주석/시트 설정, 제목 블록 및 경계가 유지됩니다. 모든 도면 뷰, 연관된 주석 및 부품 리스트는 제거됩니다."/>
	<label commandName="lclzFDWGConstraintCoincident1" devLabel="Constrains the position of two points or a point and a line or a curve together" translation="두 점 또는 한 점과 한 선 또는 여러 곡선의 위치를 함께 구속합니다."/>
	<label commandName="lclzFDWGConstraintCoincident2" devLabel="This could be a point constrained along a line, two points constrained to each other, or a point constrained along a curve." translation="이는 선을 따라 구속되는 점, 서로 구속되는 두 점 또는 곡선을 따라 구속되는 점일 수 있습니다."/>
	<label commandName="lclzFDWGConstraintCollinear1" devLabel="Constrains two or more objects so that they share a common line." translation="두 개 이상의 객체가 공통 선을 공유하도록 구속합니다."/>
	<label commandName="lclzFDWGConstraintCollinear2" devLabel="This could be a line and a rectangle, where the line and one edge of the rectangle lie along the same line." translation="이는 선과 직사각형일 수 있으며, 선과 직사각형의 한 모서리는 같은 선을 따라 위치합니다."/>
	<label commandName="lclzFDWGConstraintConcentric" devLabel="Constrains two or more arcs, circles, or ellipses to the same center point." translation="두 개 이상의 호, 원 또는 타원을 동일한 중심점에 구속합니다."/>
	<label commandName="lclzFDWGConstraintEqual" devLabel="Constrains similar objects so that their sizes are identical. When the size of one object changes, the others adjust, too." translation="비슷한 객체의 크기가 동일하도록 구속합니다. 한 객체의 크기가 변경될 때 다른 객체도 조정됩니다."/>
	<label commandName="lclzFDWGConstraintFix" devLabel="Locks the size and location of a point or an object." translation="점 또는 객체의 크기와 위치를 잠급니다."/>
	<label commandName="lclzFDWGConstraintParallel" devLabel="Constrains two lines so that they extend in the same direction and never intersect." translation="두 선이 동일한 방향으로 연장되고 교차하지 않도록 구속합니다."/>
	<label commandName="lclzFDWGConstraintPerpendicular" devLabel="Constrains two objects so that they lie perpendicular (at a 90-degree angle) to each other." translation="두 객체가 서로 수직(90도 각도)이 되도록 두 객체를 구속합니다."/>
	<label commandName="lclzFDWGConstraintSymmetry" devLabel="Constrains two or more objects so that they are symmetrical (identical to each other in relation to a common axis)." translation="두 개 이상의 객체가 대칭(공통 축을 기준으로 서로 동일)되도록 구속합니다."/>
	<label commandName="lclzFDWGGcHorizontalVerticalCommand" devLabel="Constrains a single line on either a vertical or horizontal axis, whichever is closer to the current alignment." translation="현재 정렬에 가까운 수직 축 또는 수평 축 중 하나로 단일 선을 구속합니다."/>
	<label commandName="lclzFDWGGcTangentCommand" devLabel="Constrains a curve and another object so that they touch at a single point but never cross each other. " translation="곡선과 다른 객체가 한 지점에서 접촉하지만 서로 교차하지 않도록 구속합니다. "/>
	<label commandName="lclzFinishBlock" devLabel="Finish Title Block" translation="제목 블록 마침"/>
	<label commandName="lclzFinishBorder" devLabel="Finish Border" translation="경계 마침"/>
	<label commandName="lclzFinishEdit" devLabel="Finish Title Block" translation="제목 블록 마침"/>
	<label commandName="lclzFinishSketch" devLabel="Finish Sketch" translation="스케치 마침"/>
	<label commandName="lclzFinishSketchSymbol" devLabel="Finish Sketch Symbol" translation="스케치 기호 완료"/>
	<label commandName="lclzFusionChangeDocSettingCommandTipsDesc" devLabel="When you create a new drawing using the From Scratch option, default document settings are based on the preferences you set in the Fusion 360 Preferences dialog.Some document settings are read-only, because they're inherited from the design, controlled by the drafting standard, or can only be specified when you first create a drawing." translation="처음부터 옵션을 사용하여 새 도면을 작성할 때 기본 문서 설정은 Fusion 360 기본 설정 대화상자에서 설정한 기본 설정을 기반으로 합니다. 일부 문서 설정은 설계에서 상속되거나 제도 표준에 의해 제어되거나 처음 도면을 작성할 때만 지정할 수 있으므로 읽기 전용입니다."/>
	<label commandName="lclzFusionChangeDocSettingCommandTipsDesc1" devLabel="When you create a new drawing using the From Scratch option, default document settings are based on the preferences you set in the Fusion 360 Preferences dialog.Some document settings are read-only, because they're inherited from the design, controlled by the drafting standard, or can only be specified when you first create a drawing." translation="처음부터 옵션을 사용하여 새 도면을 작성할 때 기본 문서 설정은 Fusion 360 기본 설정 대화상자에서 설정한 기본 설정을 기반으로 합니다. 일부 문서 설정은 설계에서 상속되거나 제도 표준에 의해 제어되거나 처음 도면을 작성할 때만 지정할 수 있으므로 읽기 전용입니다."/>
	<label commandName="lclzFusionChangeDocSettingCommandTipsTips" devLabel="Click through the tabs to view or change standard, units, text, dimension, line width settings, and object properties such as line type and color for the current drawing." translation="탭을 클릭하여 표준, 단위, 문자, 치수, 선 폭 설정 및 현재 도면의 선종류 및 색상과 같은 객체 특성을 보거나 변경합니다."/>
	<label commandName="lclzFusionChangeDocSettingCommandTipsTips1" devLabel="Click through the tabs to view or change standard, units, text, dimension, line width settings, and object properties such as line type and color for the current drawing." translation="탭을 클릭하여 표준, 단위, 문자, 치수, 선 폭 설정 및 현재 도면의 선종류 및 색상과 같은 객체 특성을 보거나 변경합니다."/>
	<label commandName="lclzFusionChangeDocSettingCommandTipsTitle" devLabel="Document Settings Information" translation="문서 설정 정보"/>
	<label commandName="lclzFusionChangeDocSettingCommandTipsTitle1" devLabel="Document Settings Information" translation="문서 설정 정보"/>
	<label commandName="lclzFusionConfigTable2" devLabel="Displays Configuration Table data from Design on a sheet in a Drawing." translation="디자인의 구성 테이블 데이터를 도면의 시트에 표시합니다."/>
	<label commandName="lclzFusionConfigTable3" devLabel="Add Configured Aspects like feature parameters and physical material from the Configuration Table in Design" translation="디자인의 구성 테이블에서 피쳐 매개변수 및 물리적 재질과 같은 구성된 측면 추가"/>
	<label commandName="lclzFusionDocMinMaxDimensionCmd1" devLabel="Measures the minimum or maximum distance from edge to curve or curve to curve." translation="모서리에서 곡선까지 또는 곡선에서 곡선까지 최소 또는 최대 거리를 측정합니다."/>
	<label commandName="lclzFusionDocMinMaxDimensionCmd2" devLabel="For curve selection, start point reference for minimum and maximum distance is based on where you click on the curve." translation="곡선 선택의 경우 최소 및 최대 거리에 대한 시작점 참조는 곡선을 클릭한 위치를 기준으로 합니다."/>
	<label commandName="lclzFusionDocMinMaxDimensionCmd3" devLabel="Select Curve X/Y Min/Max snap points to measure the overall length of the curve horizontally or vertically." translation="곡선 X/Y 최소/최대 스냅점을 선택하여 곡선의 전체 길이를 수평 또는 수직으로 측정합니다."/>
	<label commandName="lclzFusionDocShowHistoryForDrawingToolbarCommandText" devLabel="Drawing History" translation="도면 히스토리"/>
	<label commandName="lclzFusionDocTab" devLabel="DRAWING" translation="도면"/>
	<label commandName="lclzFusionDrawingAddSheetTips" devLabel="Add a new sheet which by default inherits the properties of the active sheet, or select the desired options. " translation="기본적으로 활성 시트의 특성을 상속하는 새 시트를 추가하거나 원하는 옵션을 선택합니다. "/>
	<label commandName="lclzFusionDrawingAddSheetTipsDesc" devLabel="Right-click anywhere within the sheet bar to add a new sheet there." translation="시트 막대 내의 아무 곳이나 마우스 오른쪽 버튼으로 클릭하여 해당 위치에 새 시트를 추가합니다."/>
	<label commandName="lclzFusionDrawingAddSheetTitle" devLabel="Add Sheet Information" translation="시트 정보 추가"/>
	<label commandName="lclzFusionDrawingAlignBalloon1" devLabel="Aligns existing balloons and bend identifiers." translation="기존 품번기호 및 절곡부 식별자를 정렬합니다."/>
	<label commandName="lclzFusionDrawingAlignBalloon2" devLabel="Select all balloons or bend identifiers to align, specify the first point, then specify a second point. The balloons or bend identifiers are distributed equally between the two points." translation="정렬할 모든 품번기호 또는 절곡부 식별자를 선택하고 첫 번째 점을 지정한 후, 두 번째 점을 지정합니다. 품번기호 또는 절곡부 식별자는 두 점 사이에서 동일하게 분산됩니다."/>
	<label commandName="lclzFusionDrawingAlignedDimension1" devLabel="Measures the precise distance between two points. Create dimensions that are parallel to the locations or objects that you specify." translation="두 점 사이의 정확한 거리를 측정합니다. 지정한 위치나 객체에 평행한 치수를 작성합니다."/>
	<label commandName="lclzFusionDrawingAngularDimension1" devLabel="Measures the angle of a rounded edge or the angle between two points or edges." translation="둥근 모서리의 각도 또는 두 점이나 모서리 사이의 각도를 측정합니다."/>
	<label commandName="lclzFusionDrawingArc1" devLabel="Creates an arc using 3 points." translation="세 점을 사용하여 호를 작성합니다."/>
	<label commandName="lclzFusionDrawingArc2" devLabel="Specify the arc's start point, middle point and end point." translation="호의 시작점, 중간점 및 끝점을 지정합니다."/>
	<label commandName="lclzFusionDrawingArcDimension1" devLabel="Measures the distance along an arc or a polyline arc segment." translation="호 또는 폴리선 호 세그먼트를 따라 거리를 측정합니다."/>
	<label commandName="lclzFusionDrawingArcDimension2" devLabel="Specify arc length dimension location, or right-click to select Full/Partial arc length from the context menu, then place the dimension." translation="호 길이 치수 위치를 지정하거나 마우스 오른쪽 버튼을 클릭하여 상황에 맞는 메뉴에서 전체/부분 호 길이를 선택한 후, 치수를 배치합니다."/>
	<label commandName="lclzFusionDrawingArrow1" devLabel="Creates a leader within the sketch." translation="스케치 내에서 지시선을 작성합니다."/>
	<label commandName="lclzFusionDrawingArrow2" devLabel="Specify the leader's start point, then its end point." translation="지시선의 시작점을 지정한 후, 끝점을 지정합니다."/>
	<label commandName="lclzFusionDrawingAttribute1" devLabel="Specify a point then enter the attribute's prompt. When finished, click outside the text editor." translation="점을 지정한 후, 속성의 프롬프트를 입력합니다. 작업을 마치면 문자 편집기 외부를 클릭합니다."/>
	<label commandName="lclzFusionDrawingAutoDimText1" devLabel="Creates dimensions automatically." translation="치수를 자동으로 작성합니다."/>
	<label commandName="lclzFusionDrawingAutoDimText2" devLabel="Select a dimensioning method, modify number of dimensions, datum point, and select alternate dimensions." translation="치수기입 방법을 선택하고 치수 개수, 데이텀 점을 수정한 다음 대체 치수를 선택합니다."/>
	<label commandName="lclzFusionDrawingAuxiliaryView1" devLabel="Creates a projected view that is aligned to an edge in a parent view." translation="상위 뷰의 모서리에 맞춰 정렬된 투영된 뷰를 작성합니다."/>
	<label commandName="lclzFusionDrawingAuxiliaryView2" devLabel="Select an edge in a parent view, place the projected view, then adjust the view's style, scale and edge visibility." translation="상위 뷰에서 모서리를 선택하고 투영된 뷰를 배치한 후, 뷰의 스타일, 축척 및 모서리 가시성을 조정합니다."/>
	<label commandName="lclzFusionDrawingBalloon1" devLabel="Creates a balloon for the selected component." translation="선택한 구성요소의 품번기호를 작성합니다."/>
	<label commandName="lclzFusionDrawingBalloon2" devLabel="Select a component's edge, then place the balloon." translation="구성요소의 모서리를 선택한 후, 품번기호를 배치합니다."/>
	<label commandName="lclzFusionDrawingBalloonRenumber1" devLabel="Renumbers existing balloons or bend identifiers and automatically updates associated parts lists and bend tables." translation="기존 품번기호 또는 절곡부 식별자의 번호를 다시 매기고 연관된 부품 리스트 및 절곡부 테이블을 자동으로 업데이트합니다."/>
	<label commandName="lclzFusionDrawingBalloonRenumber2" devLabel="Specify the starting number, then select balloons or bend identifiers in the order you want them to appear in the parts list or bend table. Renumbering is applied based on the order of selection." translation="시작 번호를 지정한 후, 품번기호 또는 절곡부 식별자를 부품 리스트 또는 절곡부 테이블에 표시할 순서대로 선택합니다. 다시 번호매기기는 선택 순서에 따라 적용됩니다."/>
	<label commandName="lclzFusionDrawingBaselineDimension1" devLabel="Select an existing linear dimension, then specify a point to create a new dimension." translation="기존 선형 치수를 선택한 후, 점을 지정하여 새 치수를 작성합니다."/>
	<label commandName="lclzFusionDrawingBaselineDimension2" devLabel="Continue specifying points to create multiple dimensions all originating from the same base point." translation="계속 점을 지정하여 모두 같은 기준점에서 시작되는 여러 치수를 작성합니다."/>
	<label commandName="lclzFusionDrawingBendID1" devLabel="Creates a bend identifier for the selected bend centerline." translation="선택한 절곡부 중심선에 대한 절곡부 식별자를 작성합니다."/>
	<label commandName="lclzFusionDrawingBendID2" devLabel="Select a bend centerline. The bend identifier is automatically placed without a leader above the centerline. To add a leader, drag the note away from the centerline." translation="절곡부 중심선을 선택합니다. 절곡부 식별자는 중심선 위에 지시선 없이 자동으로 배치됩니다. 지시선을 추가하려면 중심선 밖으로 주를 끄십시오."/>
	<label commandName="lclzFusionDrawingBendNoteLeaderTipsDesc" devLabel="You can control the font style and text height for all annotations in the drawing by clicking Annotation Settings at the bottom of the drawing area." translation="도면 영역 저면도의 주석 설정을 클릭하여 도면의 모든 주석에 대해 글꼴 스타일과 문자 높이를 제어할 수 있습니다."/>
	<label commandName="lclzFusionDrawingBendNoteLeaderTipsTips" devLabel="You can include special characters and symbols by entering a control code or a Unicode string." translation="조정 코드 또는 유니코드 문자열을 입력하여 특수 문자 및 기호를 포함할 수 있습니다."/>
	<label commandName="lclzFusionDrawingBendNoteLeaderTipsTitle" devLabel="NOTE INFORMATION" translation="주 정보"/>
	<label commandName="lclzFusionDrawingBendTable1" devLabel="Creates a bend table based on a sheet metal flat pattern reference." translation="판금 플랫 패턴 참조를 기반으로 절곡부 테이블을 작성합니다."/>
	<label commandName="lclzFusionDrawingBendTable2" devLabel="Select a flat pattern view, then place the bend table on the sheet. Bend identifiers are automatically added to the view." translation="플랫 패턴 뷰를 선택한 후, 시트에 절곡부 테이블을 배치합니다. 절곡부 식별자가 뷰에 자동으로 추가됩니다."/>
	<label commandName="lclzFusionDrawingBlocCloseCommandTip1" devLabel="Closes the editor and returns to the drawing or drawing template." translation="편집기를 닫고 도면 또는 도면 템플릿으로 돌아갑니다."/>
	<label commandName="lclzFusionDrawingBlockEditorImageInsert1" devLabel="Inserts the selected image into the current block definition." translation="선택한 이미지를 현재 블록 정의에 삽입합니다."/>
	<label commandName="lclzFusionDrawingBreakoutSectionView1" devLabel="Removes a defined area of material to expose inner features in an existing drawing view." translation="기존 도면 뷰에서 내부 형상을 드러내기 위해 정의된 영역의 재료를 제거합니다."/>
	<label commandName="lclzFusionDrawingBreakoutSectionView2" devLabel="Select a parent view, then specify the shape and depth of the area of material to remove." translation="상위 뷰를 선택한 후, 제거할 재료 영역의 모양과 깊이를 지정합니다."/>
	<label commandName="lclzFusionDrawingBreakoutSectionViewTipsDesc" devLabel="To modify a Breakout Section View depth, hover over the outline and double-click or right-click to select the Edit Breakout Section View option. For modified design geometry, use Reset Start Point to move the start point to the front of the model for depth calculation. Breakout Section Views are inherited in projected isometric view." translation="부분 단면도 깊이를 수정하려면 외곽선 위에 마우스를 놓고 두 번 클릭하거나 마우스 오른쪽 버튼을 클릭하여 브레이크 아웃 단면도 편집 옵션을 선택합니다. 수정된 설계 형상의 경우 깊이 계산을 위해 시작점 재설정을 사용하여 시작점을 모형 앞으로 이동합니다. 브레이크 아웃 단면도는 투영된 등각투영 뷰에서 상속됩니다."/>
	<label commandName="lclzFusionDrawingBreakoutSectionViewTipsTips" devLabel="Create a cut shape profile on an orthographic view. When complete, define the cut depth, then click OK to generate the Breakout Section View." translation="직교 뷰에서 절단 쉐이프 프로파일을 작성합니다. 완료되면 절단 깊이를 정의한 다음 확인을 클릭하여 브레이크 아웃 단면 뷰를 생성합니다."/>
	<label commandName="lclzFusionDrawingBreakoutSectionViewTipsTitle" devLabel="Breakout Section View Information" translation="브레이크 아웃 단면 뷰 정보"/>
	<label commandName="lclzFusionDrawingBrokenView1" devLabel="Shortens an existing view by removing a portion of the design." translation="설계의 일부를 제거하여 기존 뷰를 줄입니다."/>
	<label commandName="lclzFusionDrawingBrokenView2" devLabel="Select a parent view, select horizontal or vertical, specify the start of the break, then specify the end of the break. The portion of the design between the breaks is removed." translation="상위 뷰를 선택하고 수평 또는 수직을 선택하고 끊기 시작을 지정한 후, 끊기 끝을 지정합니다. 끊기 사이의 설계 부분이 제거됩니다."/>
	<label commandName="lclzFusionDrawingCenterPattern1" devLabel="Select rounded edges, such as holes or fillets. A center mark pattern including a PCD is created." translation="홀이나 모깎기와 같은 둥근 모서리를 선택합니다. PCD를 포함하는 중심 표식 패턴이 작성됩니다."/>
	<label commandName="lclzFusionDrawingCenterPatternEdit1" devLabel="Select an existing centermark pattern for editing." translation="편집할 기존 중심 표식 패턴을 선택합니다."/>
	<label commandName="lclzFusionDrawingCenterPatternTipsDesc" devLabel="A Reference Edge has to be selected while creating a center mark pattern for a slot." translation="슬롯에 대한 중심 표식 패턴을 작성하는 동안 참조 모서리를 선택해야 합니다."/>
	<label commandName="lclzFusionDrawingCenterPatternTipsTips" devLabel="Select the edges of features (e.g. holes) in the appropriate order to form the required center mark pattern. The Auto-complete checkbox is checked by default. The Center Mark Pattern is created automatically when you click just one hole or rounded edge." translation="필요한 중심 표식 패턴을 형성하기 위해 적절한 순서로 피쳐(예: 홀)의 모서리를 선택하십시오. 자동 완성 확인란은 기본적으로 선택되어 있습니다. 하나의 홀 또는 둥근 모서리만 클릭하면 중심 표식 패턴이 자동으로 작성됩니다."/>
	<label commandName="lclzFusionDrawingCenterPatternTipsTitle" devLabel="Center Mark Pattern Information" translation="중심 표식 패턴 정보"/>
	<label commandName="lclzFusionDrawingCenterline1" devLabel="Select two straight edges. The centerline is created between them." translation="두 직선 모서리를 선택합니다. 이 두 모서리 사이에 중심선이 작성됩니다."/>
	<label commandName="lclzFusionDrawingCentermark1" devLabel="Select a rounded edge, such as a fillet, hole, sphere, or cylinder." translation="모깎기, 홀, 구, 원통 등의 둥근 모서리를 선택합니다."/>
	<label commandName="lclzFusionDrawingChainDimension1" devLabel="Select an existing linear dimension, then specify a point to create a new dimension." translation="기존 선형 치수를 선택한 후, 점을 지정하여 새 치수를 작성합니다."/>
	<label commandName="lclzFusionDrawingChainDimension2" devLabel="Continue specifying points to create multiple side-by-side dimensions." translation="계속 점을 지정하여 여러 병렬 치수를 작성합니다."/>
	<label commandName="lclzFusionDrawingCircle1" devLabel="Creates a circle using its center point and radius." translation="중심점 및 반지름을 사용하여 원을 작성합니다."/>
	<label commandName="lclzFusionDrawingCircle2" devLabel="Specify the circle's center point, then specify a second point to define its radius." translation="원의 중심점을 지정한 후, 두 번째 점을 지정하여 원의 반지름을 정의합니다."/>
	<label commandName="lclzFusionDrawingConfigTableEdit" devLabel="Edits a Configuration history." translation="구성 내역을 편집합니다."/>
	<label commandName="lclzFusionDrawingConfigTableEditTipsDesc" devLabel="To replace a dimension value with the configured aspect name, right‑click the dimension and choose Replace with Configured Aspect. Or use the Dimensions dropdown on the toolbar and select Replace with Configured Aspect. You can also double‑click the dimension, then under Replace Dimension Text, choose the desired configured aspect." translation="치수 값을 구성된 측면 이름으로 대체하려면 치수를 마우스 오른쪽 버튼으로 클릭하고 구성된 측면으로 대체를 선택합니다. 또는 도구막대의 치수 드롭다운을 사용하고 구성된 측면으로 대체를 선택합니다. 치수를 두 번 클릭한 다음 치수 문자 대체에서 원하는 구성된 측면을 선택할 수도 있습니다."/>
	<label commandName="lclzFusionDrawingConfigTableEditTipsTips" devLabel="Edit the title of the configuration table as needed. Select which configured aspects to show as table columns. To change column order, open the Column Order tab. Click the Up arrow to move the selected column left. Click the Down arrow to move the selected column right." translation="필요에 따라 구성 테이블의 제목을 편집합니다. 테이블 열로 표시할 구성된 측면을 선택합니다. 열 순서를 변경하려면 열 순서 탭을 엽니다. 위쪽 화살표를 클릭하면 선택한 열이 왼쪽으로 이동합니다. 아래쪽 화살표를 클릭하면 선택한 열이 오른쪽으로 이동합니다."/>
	<label commandName="lclzFusionDrawingConfigTableEditTipsTitle" devLabel="Configuration Table Information" translation="구성 테이블 정보"/>
	<label commandName="lclzFusionDrawingCopy1" devLabel="Select objects to copy, specify a base point, then specify a second point to define the copy's location." translation="복사할 객체를 선택하고 기준점을 지정한 후, 두 번째 점을 지정하여 사본 위치를 정의합니다."/>
	<label commandName="lclzFusionDrawingCreateFromComponentsTipsDesc" devLabel="For more control over drawing defaults, make adjustments in Preferences in your User Name drop-down in the top right." translation="도면 기본값을 더 잘 제어하려면 상단 오른쪽에 있는 사용자 이름 드롭다운에서 기본 설정을 조정합니다."/>
	<label commandName="lclzFusionDrawingCreateFromComponentsTipsTips" devLabel="Standard and Units cannot be changed once a drawing is created. Sheet size, however, can be adjusted at any time in Sheet Settings." translation="도면을 작성한 후에는 표준 및 단위를 변경할 수 없습니다. 그러나 시트 크기는 시트 설정에서 언제든지 조정할 수 있습니다."/>
	<label commandName="lclzFusionDrawingCreateFromComponentsTipsTitle" devLabel="Create Drawing Information" translation="도면 작성 정보"/>
	<label commandName="lclzFusionDrawingCreatePartsList1" devLabel="Generates a parts list of the model associated to the drawing." translation="도면에 연관된 모형의 부품 리스트를 생성합니다."/>
	<label commandName="lclzFusionDrawingCreateSketchSymbol1" devLabel="Enters Sketch mode, where you can create a sketch symbol." translation="스케치 기호를 작성할 수 있는 스케치 모드를 시작합니다."/>
	<label commandName="lclzFusionDrawingCropView1" devLabel="Removes an unwanted portion of the view image." translation="뷰 이미지의 원치 않는 부분을 제거합니다."/>
	<label commandName="lclzFusionDrawingCropView2" devLabel="Select a view and drag the crop window." translation="뷰를 선택하고 자르기 창을 드래그하세요."/>
	<label commandName="lclzFusionDrawingCropViewTipsDesc" devLabel="You can choose the type, line width, and color for the crop view outline in the Document Settings under the View tab’s More Options. When a view is cropped, the show/hide outline option becomes available in the Drawing View dialog." translation="보기 탭의 기타 옵션에 있는 문서 설정에서 자르기 뷰 외곽선의 유형, 선 폭 및 색상을 선택할 수 있습니다. 뷰가 잘리면 도면 뷰 대화상자에서 외곽선 표시/숨기기 옵션을 사용할 수 있게 됩니다."/>
	<label commandName="lclzFusionDrawingCropViewTipsTips" devLabel="Crop a view to remove an unwanted portion of the view image. You can crop a view only once." translation="뷰를 잘라 뷰 이미지의 원치 않는 부분을 제거합니다. 뷰는 한 번만 자를 수 있습니다."/>
	<label commandName="lclzFusionDrawingCropViewTipsTitle" devLabel="Crop View Information" translation="자르기 뷰 정보"/>
	<label commandName="lclzFusionDrawingDatumId1" devLabel="Creates a datum identifier." translation="데이텀 식별자를 작성합니다."/>
	<label commandName="lclzFusionDrawingDatumId2" devLabel="Select an edge, dimension extension line or feature control frame, place the datum identifier, then add an identifier and notes." translation="모서리, 치수 치수보조선 또는 형상 공차를 선택하고 데이텀 식별자를 배치한 후, 식별자 및 주를 추가합니다."/>
	<label commandName="lclzFusionDrawingDatumIdTipsDesc" devLabel="To create a surface symbol in an ISO drawing, select an object, right-click to activate the marking menu, and select Surface." translation="ISO 도면에서 곡면 기호를 작성하려면 객체를 선택하고 마우스 오른쪽 버튼을 클릭하여 표식 메뉴를 활성화한 후에 곡면을 선택합니다."/>
	<label commandName="lclzFusionDrawingDatumIdTipsTips" devLabel="Symbols can be added from the text field in the drop-down menu." translation="드롭다운 메뉴의 문자 필드에서 기호를 추가할 수 있습니다."/>
	<label commandName="lclzFusionDrawingDatumIdTipsTitle" devLabel="Datum Identifier Information" translation="데이텀 식별자 정보"/>
	<label commandName="lclzFusionDrawingDiameterDimension1" devLabel="Select a rounded edge, such as a fillet, hole, sphere, or cylinder, then place the dimension." translation="모깎기, 홀, 구, 원통 등의 둥근 모서리를 선택한 후, 치수를 배치합니다."/>
	<label commandName="lclzFusionDrawingDimensionArrangeCmd1" devLabel="Arranges linear or angular dimensions." translation="선형 또는 각도 치수를 배열합니다."/>
	<label commandName="lclzFusionDrawingDimensionArrangeCmd2" devLabel="Select a base dimension, then select dimensions to stack or align with the base dimension." translation="기준 치수를 선택한 후, 스택할 치수를 선택하거나 기준 치수에 정렬합니다."/>
	<label commandName="lclzFusionDrawingDimensionArrangeCmdTANDTDesc" devLabel="You can align dimensions across views if needed. To do so, select the base dimension on the first view and the dimensions to align on the second view." translation="필요한 경우 뷰 전체에서 치수를 정렬할 수 있습니다. 이렇게 하려면, 첫 번째 뷰에서 기준 치수를 선택하고 두 번째 뷰에서 정렬할 치수를 선택합니다."/>
	<label commandName="lclzFusionDrawingDimensionArrangeCmdTANDTId" devLabel="Arrange Dimension Information" translation="치수 정보 배열"/>
	<label commandName="lclzFusionDrawingDimensionArrangeCmdTANDTTips" devLabel="When stacking dimensions, the default spacing is calculated as 3 x Medium Text Height (as shown in Document Settings). This prevents overlaps from occurring when tolerances exist." translation="스택 치수를 사용할 때 기본 간격은 3 x 중간 문자 높이로 계산됩니다(문서 설정에 표시된 대로). 이렇게 하면 공차가 있을 때 겹침이 발생하지 않도록 방지할 수 있습니다."/>
	<label commandName="lclzFusionDrawingDimensionBreak" devLabel="Select existing dimensions or leaders, then add or remove breaks where they overlap other dimensions and leaders." translation="기존 치수 또는 지시선을 선택한 후, 다른 치수 및 지시선과 겹치는 위치에 끊기를 추가하거나 제거합니다."/>
	<label commandName="lclzFusionDrawingDimensionBreakTipsDesc" devLabel="Dimension Break breaks the selected intersecting dimensions at the intersection points. You can also add a Dimension Break to other objects like Balloons, Bend Identifiers, and Leaders." translation="치수 끊기는 교차점에서 선택된 교차 치수를 끊습니다. 또한 품번기호, 절곡부 식별자 및 지시선과 같은 다른 객체에 치수 끊기를 추가할 수도 있습니다."/>
	<label commandName="lclzFusionDrawingDimensionBreakTipsTips" devLabel="Right-click on selected dimesnions to create Dimension Breaks." translation="선택한 치수를 마우스 오른쪽 버튼으로 클릭하여 치수 끊기를 작성합니다."/>
	<label commandName="lclzFusionDrawingDimensionBreakTipsTitle" devLabel="Dimension Break Information" translation="치수 끊기 정보"/>
	<label commandName="lclzFusionDrawingDimensionEdit1" devLabel="Select a dimension to modify its properties." translation="특성을 수정할 치수를 선택합니다."/>
	<label commandName="lclzFusionDrawingDimensionEditConfigProperty1" devLabel="Filter by Placed Configuration Tables" translation="배치된 구성 테이블별로 필터링"/>
	<label commandName="lclzFusionDrawingDimensionEditConfigProperty2" devLabel="Filters the list to aspects from configuration tables placed in the drawing (any sheet). If none are placed, the list shows all aspects from the design configuration table." translation="리스트를 도면(모든 시트)에 배치된 구성 테이블의 측면으로 필터링합니다. 아무것도 배치되지 않으면 리스트에 디자인 구성 테이블의 모든 측면이 표시됩니다."/>
	<label commandName="lclzFusionDrawingDimensionEditTipsDesc" devLabel="You can restore default properties if you modify the precision, alternate units, or tolerance type. Select the dimension, right-click to access the marking menu, and select Restore Defaults." translation="정밀도, 대체 단위 또는 공차 유형을 수정하는 경우 기본 특성을 복원할 수 있습니다. 이렇게 하려면 치수를 선택하고 마우스 오른쪽 버튼을 클릭하여 표식 메뉴에 액세스한 다음 기본값 복원을 선택합니다."/>
	<label commandName="lclzFusionDrawingDimensionEditTipsTips" devLabel="To change the settings for all dimensions on a sheet, use Annotation Settings at the bottom of the drawing area." translation="시트의 모든 치수에 대한 설정을 변경하려면 도면 영역의 저면도에 있는 주석 설정을 사용합니다."/>
	<label commandName="lclzFusionDrawingDimensionEditTipsTitle" devLabel="Dimension Edit Information" translation="치수 편집 정보"/>
	<label commandName="lclzFusionDrawingEdgeExtension1" devLabel="Select two straight edges.  An edge extension is created for each edge that terminates at their intersection." translation="두 개의 직선 모서리를 선택합니다. 각각의 모서리에 대해 교차점에서 종료되는 모서리 연장이 작성됩니다."/>
	<label commandName="lclzFusionDrawingEdgeSymbol1" devLabel="Creates an edge symbol." translation="모서리 기호를 작성합니다."/>
	<label commandName="lclzFusionDrawingEdgeSymbol2" devLabel="Select an edge, specify attributes for the symbol like direction,values, or flag the symbol as majority symbol." translation="모서리를 선택하거나, 방향, 값과 같은 기호의 속성을 지정하거나, 기호에 주요 기호로 플래그를 지정합니다."/>
	<label commandName="lclzFusionDrawingEdgeSymbolTipsTips" devLabel="The properties available in the Command Dialog depend on the drafting standard in use." translation="명령 대화상자에서 사용할 수 있는 특성은 사용 중인 제도 표준에 따라 다릅니다."/>
	<label commandName="lclzFusionDrawingEdgeSymbolTipsTitle" devLabel="Edge Information" translation="모서리 정보"/>
	<label commandName="lclzFusionDrawingEditImage" devLabel="Edits the selected image into the current sheet." translation="선택한 이미지를 현재 시트로 편집합니다."/>
	<label commandName="lclzFusionDrawingEllipse1" devLabel="Creates an ellipse defined by a center point, major axis and a point on the ellipse." translation="중심점, 장축 및 타원 위의 점에 의해 정의되는 타원을 작성합니다."/>
	<label commandName="lclzFusionDrawingEllipse2" devLabel="Select the center point of the ellipse. Select the second point to define the first axis. Select the third point to define a point on the ellipse." translation="타원의 중심점을 선택합니다. 두 번째 점을 선택하여 첫 번째 축을 정의합니다. 세 번째 점을 선택하여 타원 위의 점을 정의합니다."/>
	<label commandName="lclzFusionDrawingEmptyLeader1" devLabel="Creates a leader note." translation="지시선 주를 작성합니다."/>
	<label commandName="lclzFusionDrawingEmptyLeader2" devLabel="Select an edge, place the text, then enter and format text as required." translation="모서리를 선택하고 텍스트를 배치한 후, 필요에 따라 텍스트를 입력하고 형식을 지정합니다."/>
	<label commandName="lclzFusionDrawingEmptyLeaderTipsDesc" devLabel="You can control the font style and text height for all annotations in the drawing by clicking Annotation Settings at the bottom of the drawing area." translation="도면 영역 저면도의 주석 설정을 클릭하여 도면의 모든 주석에 대해 글꼴 스타일과 문자 높이를 제어할 수 있습니다."/>
	<label commandName="lclzFusionDrawingEmptyLeaderTipsTips" devLabel="You can include special characters and symbols by entering a control code or a Unicode string." translation="조정 코드 또는 유니코드 문자열을 입력하여 특수 문자 및 기호를 포함할 수 있습니다."/>
	<label commandName="lclzFusionDrawingEmptyLeaderTipsTitle" devLabel="NOTE INFORMATION" translation="주 정보"/>
	<label commandName="lclzFusionDrawingErase1" devLabel="Select objects to delete, then press Enter." translation="삭제할 객체를 선택한 후, Enter 키를 누릅니다."/>
	<label commandName="lclzFusionDrawingEraseTipsDesc" devLabel="Deselect objects by holding Shift while dragging across or clicking objects." translation="Shift 키를 누른 상태에서 객체에 걸쳐 끌거나 객체를 클릭하여 객체를 선택취소합니다."/>
	<label commandName="lclzFusionDrawingEraseTipsTips" devLabel="Click and drag to select multiple objects. A selection box from left to right will select all objects completely within the box. A selection box from right to left will select all objects partially within the box." translation="클릭한 다음 끌어서 여러 객체를 선택합니다. 왼쪽에서 오른쪽으로 선택 상자를 끌면 상자 내에 완전히 포함된 모든 객체가 선택됩니다. 오른쪽에서 왼쪽으로 선택 상자를 끌면 상자 내에 부분적으로 포함된 모든 객체가 선택됩니다."/>
	<label commandName="lclzFusionDrawingEraseTipsTitle" devLabel="Delete Information" translation="정보 삭제"/>
	<label commandName="lclzFusionDrawingExportDWGTips" devLabel="Hold either the Shift or Ctrl keys to select multiple sheets on the sheet bar to output a DWG." translation="Shift 키 또는 Ctrl 키를 누른 채로 시트 막대의 여러 시트를 선택하여 DWG를 출력합니다."/>
	<label commandName="lclzFusionDrawingExportDWGTitle" devLabel="Export DWG Information" translation="DWG 정보 내보내기"/>
	<label commandName="lclzFusionDrawingExportDxfTips" devLabel="Hold either the Shift or Ctrl keys to select multiple sheets on the sheet bar to output a DXF" translation="Shift 키 또는 Ctrl 키를 누른 채로 시트 막대에서 여러 시트를 선택하여 DXF를 출력합니다."/>
	<label commandName="lclzFusionDrawingExportDxfTitle" devLabel="Export DXF Information" translation="DXF 정보 내보내기"/>
	<label commandName="lclzFusionDrawingExportPDF1" devLabel="Creates a PDF file of the current drawing." translation="현재 도면의 PDF 파일을 작성합니다."/>
	<label commandName="lclzFusionDrawingExportPartsList1" devLabel="Creates a CSV file of the selected table" translation="선택한 테이블의 CSV 파일을 작성합니다."/>
	<label commandName="lclzFusionDrawingExportPdfTips" devLabel="Hold either the Shift or Ctrl keys to select multiple sheets on the sheet bar to output a PDF.&#xA;Check the Open PDF check box to open the PDF when the output is done." translation="Shift 키 또는 Ctrl 키를 누른 채로 시트 막대에서 여러 시트를 선택하여 PDF를 출력합니다.&#xA;출력 완료 시 PDF를 열려면 PDF 열기 확인란을 선택합니다."/>
	<label commandName="lclzFusionDrawingExportPdfTitle" devLabel="Output PDF Information" translation="PDF 정보 출력"/>
	<label commandName="lclzFusionDrawingExtend1" devLabel="Select the objects to extend. All objects automatically become extension boundaries." translation="연장할 객체를 선택합니다. 모든 객체는 자동으로 연장 경계가 됩니다."/>
	<label commandName="lclzFusionDrawingFeatureControlFrame1" devLabel="Creates a feature control frame symbol." translation="형상 공차 기호를 작성합니다."/>
	<label commandName="lclzFusionDrawingFeatureControlFrame2" devLabel="Select an edge or dimension extension line, place the feature control frame symbol, then add characteristics, tolerances and datums." translation="모서리 또는 치수 치수보조선을 선택하고 형상 공차 기호를 배치한 후, 특성, 공차 및 데이텀을 추가합니다."/>
	<label commandName="lclzFusionDrawingFeatureControlFrameTipsDesc" devLabel="To create a surface symbol in an ISO drawing, select an object, right-click to activate the marking menu, and select Surface." translation="ISO 도면에서 곡면 기호를 작성하려면 객체를 선택하고 마우스 오른쪽 버튼을 클릭하여 표식 메뉴를 활성화한 후에 곡면을 선택합니다."/>
	<label commandName="lclzFusionDrawingFeatureControlFrameTipsTips" devLabel="Symbols can be added from the text field in the drop-down menu." translation="드롭다운 메뉴의 문자 필드에서 기호를 추가할 수 있습니다."/>
	<label commandName="lclzFusionDrawingFeatureControlFrameTipsTitle" devLabel="Feature Control Frame Information" translation="형상 공차 정보"/>
	<label commandName="lclzFusionDrawingFlipDimArrowCmd1" devLabel="Flips the direction of the selected dimension arrow." translation="선택한 치수 화살표의 방향을 반전합니다."/>
	<label commandName="lclzFusionDrawingHatchEdit1" devLabel="Select a hatch to modify its properties." translation="특성을 수정할 해치를 선택합니다."/>
	<label commandName="lclzFusionDrawingHatchEditTipsDesc" devLabel="Each hatch has its own properties. You can only modify one hatch pattern at a time." translation="각 해치에는 자체 특성이 있습니다. 한 번에 하나의 해치 패턴만 수정할 수 있습니다."/>
	<label commandName="lclzFusionDrawingHatchEditTipsTips" devLabel="Double-click a hatch to modify the hatch properties of a section view. Edit the hatch pattern, the scale factor, and the angle of the hatch pattern." translation="해치를 두 번 클릭하여 단면도의 해치 특성을 수정합니다. 해치 패턴, 축척 비율 및 해치 패턴의 각도를 편집합니다."/>
	<label commandName="lclzFusionDrawingHatchEditTipsTitle" devLabel="Hatch Edit Information" translation="해치 편집 정보"/>
	<label commandName="lclzFusionDrawingHoleThreadNoteLeaderTipsDesc" devLabel="You can control the font style and text height for all annotations in the drawing by clicking Annotation Settings at the bottom of the drawing area." translation="도면 영역 저면도의 주석 설정을 클릭하여 도면의 모든 주석에 대해 글꼴 스타일과 문자 높이를 제어할 수 있습니다."/>
	<label commandName="lclzFusionDrawingHoleThreadNoteLeaderTipsTips" devLabel="You can include special characters and symbols by entering a control code or a Unicode string." translation="조정 코드 또는 유니코드 문자열을 입력하여 특수 문자 및 기호를 포함할 수 있습니다."/>
	<label commandName="lclzFusionDrawingHoleThreadNoteLeaderTipsTitle" devLabel="NOTE INFORMATION" translation="주 정보"/>
	<label commandName="lclzFusionDrawingImageInsert1" devLabel="Inserts an image into the current sheet." translation="이미지를 현재 시트에 삽입합니다."/>
	<label commandName="lclzFusionDrawingImageInsert2" devLabel="Select an image in insert, place the image, then format as required." translation="삽입의 이미지를 선택하고 이미지를 배치한 후, 필요에 따라 형식을 지정합니다."/>
	<label commandName="lclzFusionDrawingInsertSketchSymbol1" devLabel="Inserts and manages sketch symbols." translation="스케치 기호를 삽입 및 관리합니다."/>
	<label commandName="lclzFusionDrawingInsertSketchSymbol2" devLabel="Insert, rename, edit, and delete symbols from the list of sketched symbols. You can also import them from another drawing file or a template." translation="스케치된 기호 리스트에서 기호를 삽입하고, 이름을 바꾸고, 편집하고. 삭제합니다. 다른 도면 파일이나 템플릿에서 기호를 가져올 수도 있습니다."/>
	<label commandName="lclzFusionDrawingJoggedRadialDimension1" devLabel="Creates a radius dimension of a circle, arc or polyline arc segment with the origin of the dimension and a jog at convenient locations." translation="편리한 위치에 치수의 원점과 꺾기가 있는 원, 호 또는 폴리선 호 세그먼트의 반지름 치수를 작성합니다."/>
	<label commandName="lclzFusionDrawingJoggedRadialDimension2" devLabel="Specify the override location of the center, specify the location of the dimension line and specify the location of the jog, then place the dimension." translation="중심의 재지정 위치를 지정하고 치수선의 위치를 지정하고 꺾기 위치를 지정한 후, 치수를 배치합니다."/>
	<label commandName="lclzFusionDrawingLabel1" devLabel="Creates numeric, alphabetic and custom labels. Specify the type, font and other properties of the label." translation="숫자, 알파벳 및 사용자 설정 레이블을 작성합니다. 레이블의 유형, 글꼴 및 기타 특성을 지정합니다."/>
	<label commandName="lclzFusionDrawingLayerStackTableCmd1" devLabel="Creates a table based on the PCB Layer Stack." translation="PCB 도면층 스택을 기반으로 테이블을 작성합니다."/>
	<label commandName="lclzFusionDrawingLayerStackTableCmd2" devLabel="Select between Layer Stack and Via Pairs, name the table, then adjust table columns. Leader lines are automatically added to associated diagram." translation="도면층 스택과 Via 쌍 중에서 선택하고 테이블 이름을 지정한 후, 테이블 열을 조정합니다. 지시선은 연관된 다이어그램에 자동으로 추가됩니다."/>
	<label commandName="lclzFusionDrawingLayerStackTableTipsDesc" devLabel="To place both Layer Stack and Via Pairs tables, place each table with the desired option at a time." translation="도면층 스택 및 Via 쌍 테이블을 모두 배치하려면 원하는 옵션을 사용하여 각 테이블을 하나씩 배치합니다."/>
	<label commandName="lclzFusionDrawingLayerStackTableTipsTips" devLabel="When you place a table on the bottom half of the sheet, the column labels flip to the bottom of the table. To lock or unlock the table flipping feature, press the Shift Key." translation="시트 하반부에 테이블을 배치하면 열 레이블이 테이블의 하단으로 반전됩니다. 테이블 반전 피쳐를 잠그거나 잠금해제하려면 Shift 키를 누릅니다."/>
	<label commandName="lclzFusionDrawingLayerStackTableTipsTitle" devLabel="LAYER STACK TABLE INFORMATION" translation="도면층 스택 테이블 정보"/>
	<label commandName="lclzFusionDrawingLayerStackViewCmd1" devLabel="Creates a view based on the PCB Layer Stack. Shows all layers of PCB and via pairs in abstract view." translation="PCB 도면층 스택을 기준으로 뷰를 작성합니다. PCB 및 Via 쌍의 모든 도면층을 추상 뷰로 표시합니다."/>
	<label commandName="lclzFusionDrawingLayerStackViewCmd2" devLabel="Place the view on the sheet. Can be used in combination with Layer Stack Table." translation="시트에 뷰를 배치합니다. 도면층 스택 테이블과 함께 사용할 수 있습니다."/>
	<label commandName="lclzFusionDrawingLeaderBendNote1" devLabel="Creates a bend note." translation="절곡부 주를 작성합니다."/>
	<label commandName="lclzFusionDrawingLeaderBendNote2" devLabel="Select a bend centerline. Bend information within the selected bend centerline is automatically added as text without a leader above the bend centerline." translation="절곡부 중심선을 선택합니다. 선택한 절곡부 중심선 내의 절곡부 정보는 절곡부 중심선 위에 지시선 없이 텍스트로 자동으로 추가됩니다."/>
	<label commandName="lclzFusionDrawingLeaderBendNote3" devLabel="To add a leader, drag the note away from the centerline." translation="지시선을 추가하려면 주를 중심선에서 멀리 끕니다."/>
	<label commandName="lclzFusionDrawingLeaderHoleThreadNote1" devLabel="Creates a hole or thread note." translation="홀 또는 스레드 주를 작성합니다."/>
	<label commandName="lclzFusionDrawingLeaderHoleThreadNote2" devLabel="Select a hole or thread edge, then place the text. Hole and thread information within the selected edge is automatically added as text." translation="홀 또는 스레드 모서리를 선택한 후, 텍스트를 배치합니다. 선택한 모서리 내의 홀 및 스레드 정보는 자동으로 텍스트로 추가됩니다."/>
	<label commandName="lclzFusionDrawingLeaderTipsDesc" devLabel="You can control the font style and text height for all annotations in the drawing by clicking Annotation Settings at the bottom of the drawing area." translation="도면 영역 저면도의 주석 설정을 클릭하여 도면의 모든 주석에 대해 글꼴 스타일과 문자 높이를 제어할 수 있습니다."/>
	<label commandName="lclzFusionDrawingLeaderTipsTips" devLabel="You can include special characters and symbols by entering a control code or a Unicode string." translation="조정 코드 또는 유니코드 문자열을 입력하여 특수 문자 및 기호를 포함할 수 있습니다."/>
	<label commandName="lclzFusionDrawingLeaderTipsTitle" devLabel="NOTE INFORMATION" translation="주 정보"/>
	<label commandName="lclzFusionDrawingLine1" devLabel="Creates straight lines." translation="직선을 작성합니다."/>
	<label commandName="lclzFusionDrawingLine2" devLabel="Specify the line's start point, then specify a second point to define its angle and length." translation="선의 시작점을 지정한 후, 두 번째 점을 지정하여 각도 및 길이를 정의합니다."/>
	<label commandName="lclzFusionDrawingLinearDimension1" devLabel="Measures the horizontal or vertical distance between two points. Create dimensions by selecting an edge or by selecting two points." translation="두 점 사이의 수평 또는 수직 거리를 측정합니다. 모서리를 선택하거나 두 점을 선택하여 치수를 작성합니다."/>
	<label commandName="lclzFusionDrawingMLeaderContentEdit1" devLabel="Specify the arrowhead location, specify the location of the text, then enter text. When finished, click outside the text editor." translation="화살촉 위치를 지정하고 문자 위치를 지정한 후에 문자를 입력합니다. 입력을 완료한 후에는 문자 편집기 바깥쪽을 클릭합니다."/>
	<label commandName="lclzFusionDrawingMLeaderContentEditTipsDesc" devLabel="You can control the font style and text height for all annotations in the drawing by clicking Annotation Tools at the bottom of the drawing area." translation="도면 영역 저면도의 주석 도구를 클릭하여 도면의 모든 주석에 대해 글꼴 스타일과 문자 높이를 제어할 수 있습니다."/>
	<label commandName="lclzFusionDrawingMLeaderContentEditTipsTips" devLabel="You can include special characters and symbols by entering a control code or a Unicode string." translation="조정 코드 또는 유니코드 문자열을 입력하여 특수 문자 및 기호를 포함할 수 있습니다."/>
	<label commandName="lclzFusionDrawingMLeaderContentEditTipsTitle" devLabel="NOTE INFORMATION" translation="주 정보"/>
	<label commandName="lclzFusionDrawingMText1" devLabel="Creates a note." translation="주를 작성합니다."/>
	<label commandName="lclzFusionDrawingMText2" devLabel="Specify opposing corners of the text box, then enter and format text as required." translation="텍스트 상자의 반대 코너를 지정한 후, 필요에 따라 텍스트를 입력하고 형식을 지정합니다."/>
	<label commandName="lclzFusionDrawingMTextEdit1" devLabel="Creates a note." translation="주를 작성합니다."/>
	<label commandName="lclzFusionDrawingMTextEdit2" devLabel="Specify opposing corners of the text box, then enter and format text as required." translation="텍스트 상자의 반대 코너를 지정한 후, 필요에 따라 텍스트를 입력하고 형식을 지정합니다."/>
	<label commandName="lclzFusionDrawingMTextEditTipsDesc" devLabel="You can control the font style and text height for all annotations in the drawing by clicking Annotation Tools at the bottom of the drawing area." translation="도면 영역 저면도의 주석 도구를 클릭하여 도면의 모든 주석에 대해 글꼴 스타일과 문자 높이를 제어할 수 있습니다."/>
	<label commandName="lclzFusionDrawingMTextEditTipsTips" devLabel="You can include special characters and symbols by entering a control code or a Unicode string." translation="조정 코드 또는 유니코드 문자열을 입력하여 특수 문자 및 기호를 포함할 수 있습니다."/>
	<label commandName="lclzFusionDrawingMTextEditTipsTitle" devLabel="TEXT INFORMATION" translation="문자 정보"/>
	<label commandName="lclzFusionDrawingMTextTipsDesc" devLabel="You can control the font style and text height for all annotations in the drawing by clicking Annotation Settings at the bottom of the drawing area." translation="도면 영역 저면도의 주석 설정을 클릭하여 도면의 모든 주석에 대해 글꼴 스타일과 문자 높이를 제어할 수 있습니다."/>
	<label commandName="lclzFusionDrawingMTextTipsTips" devLabel="You can include special characters and symbols by entering a control code or a Unicode string." translation="조정 코드 또는 유니코드 문자열을 입력하여 특수 문자 및 기호를 포함할 수 있습니다."/>
	<label commandName="lclzFusionDrawingMTextTipsTitle" devLabel="TEXT INFORMATION" translation="문자 정보"/>
	<label commandName="lclzFusionDrawingManageSketchSymbol1" devLabel="Manages sketch symbols in your drawing template." translation="도면 템플릿에서 스케치 기호를 관리합니다."/>
	<label commandName="lclzFusionDrawingManageSketchSymbol2" devLabel="Rename, edit, and delete symbols from the list of sketched symbols. You can also import them from another drawing file or a template." translation="스케치된 기호 리스트에서 기호의 이름을 바꾸고, 기호를 편집하고, 삭제합니다. 다른 도면 파일이나 템플릿에서 가져올 수도 있습니다."/>
	<label commandName="lclzFusionDrawingMatchDimensionCmd1" devLabel="Match Dimension Configurations." translation="치수 구성을 일치시킵니다."/>
	<label commandName="lclzFusionDrawingMatchDimensionCmd2" devLabel="After selecting the source dimension with the configuration you want, select all the dimensions you want to apply the same configurations to." translation="원하는 구성이 포함된 원본 치수를 선택한 후 동일한 구성을 적용할 모든 치수를 선택합니다."/>
	<label commandName="lclzFusionDrawingMeasure1" devLabel="Reports distance, angle and positional data for the selected points." translation="선택한 점의 거리, 각도 및 위치 데이터를 보고합니다."/>
	<label commandName="lclzFusionDrawingMove1" devLabel="Select objects to move, then click Transform. Then specify a base point and a second point." translation="이동할 객체를 선택한 후, 변환을 클릭합니다. 그런 다음 기준점과 두 번째 점을 지정합니다."/>
	<label commandName="lclzFusionDrawingMoveTipsDesc" devLabel="Deselect objects by holding Shift while dragging across or clicking objects." translation="Shift 키를 누른 상태에서 객체에 걸쳐 끌거나 객체를 클릭하여 객체를 선택취소합니다."/>
	<label commandName="lclzFusionDrawingMoveTipsTips" devLabel="Click and drag to select multiple objects. A selection box from left to right will select all objects completely within the box. A selection box from right to left will select all objects partially within the box." translation="클릭한 다음 끌어서 여러 객체를 선택합니다. 왼쪽에서 오른쪽으로 선택 상자를 끌면 상자 내에 완전히 포함된 모든 객체가 선택됩니다. 오른쪽에서 왼쪽으로 선택 상자를 끌면 상자 내에 부분적으로 포함된 모든 객체가 선택됩니다."/>
	<label commandName="lclzFusionDrawingMoveTipsTitle" devLabel="Move Information" translation="이동 정보"/>
	<label commandName="lclzFusionDrawingNewTable1" devLabel="Automatically creates a parts list with balloons, bend table with bend identifiers or custom table based on the contents of the current sheet or selected view." translation="현재 시트 또는 선택한 뷰의 컨텐츠에 따라 품번기호가 포함된 부품 리스트, 절곡부 식별자가 포함된 절곡부 테이블 또는 사용자 테이블을 자동으로 작성합니다."/>
	<label commandName="lclzFusionDrawingNewTable2" devLabel="Parts lists are created for component, assembly, and animation references. Bend tables are created for sheet metal flat pattern references." translation="부품 리스트는 구성요소, 조립품 및 애니메이션 참조에 대해 작성됩니다. 절곡부 테이블은 판금 플랫 패턴 참조에 대해 작성됩니다."/>
	<label commandName="lclzFusionDrawingNewTableTemplate1" devLabel="Select a drawing view placeholder, then place the table. The table's type is determined by the view placeholder's reference." translation="도면 뷰 자리 표시자를 선택한 후, 테이블을 배치합니다. 테이블의 유형은 뷰 자리 표시자의 참조에 의해 결정됩니다."/>
	<label commandName="lclzFusionDrawingNewTableTemplate2" devLabel="Creates a parts list for single component, assembly or animation references, and a bend table for a sheet metal flat pattern references." translation="단일 구성요소에 대한 부품 리스트, 조립품 또는 애니메이션 참조, 판금 플랫 패턴 참조에 대한 절곡부 테이블을 작성합니다."/>
	<label commandName="lclzFusionDrawingNewTableTipsDesc1" devLabel="When Type is set to Automatic, Fusion 360 determines the table type automatically, based on the contents of the current sheet. Parts lists are created for component, assembly, and animation references. Bend tables are created for sheet metal flat pattern references." translation="유형이 자동으로 설정되어 있으면 Fusion 360에서 현재 시트의 컨텐츠에 따라 테이블 유형을 자동으로 결정합니다. 부품 리스트는 구성요소, 조립품 및 애니메이션 참조에 대해 작성됩니다. 절곡부 테이블은 판금 플랫 패턴 참조에 대해 작성됩니다."/>
	<label commandName="lclzFusionDrawingNewTableTipsDesc2" devLabel="When Type is set to Automatic, Fusion 360 determines the table type automatically, based on the contents of the current sheet. Parts lists are created for component, assembly, and animation references. Bend tables are created for sheet metal flat pattern references." translation="유형이 자동으로 설정되어 있으면 Fusion 360에서 현재 시트의 컨텐츠에 따라 테이블 유형을 자동으로 결정합니다. 부품 리스트는 구성요소, 조립품 및 애니메이션 참조에 대해 작성됩니다. 절곡부 테이블은 판금 플랫 패턴 참조에 대해 작성됩니다."/>
	<label commandName="lclzFusionDrawingNewTableTipsDesc3" devLabel="When Type is set to Automatic, Fusion 360 determines the table type automatically, based on the contents of the current sheet. Parts lists are created for component, assembly, and animation references. Bend tables are created for sheet metal flat pattern references." translation="유형이 자동으로 설정되어 있으면 Fusion 360에서 현재 시트의 컨텐츠에 따라 테이블 유형을 자동으로 결정합니다. 부품 리스트는 구성요소, 조립품 및 애니메이션 참조에 대해 작성됩니다. 절곡부 테이블은 판금 플랫 패턴 참조에 대해 작성됩니다."/>
	<label commandName="lclzFusionDrawingNewTableTipsDesc4" devLabel="When Type is set to Automatic, Fusion 360 determines the table type automatically, based on the contents of the current sheet. Parts lists are created for component, assembly, and animation references. Bend tables are created for sheet metal flat pattern references." translation="유형이 자동으로 설정되어 있으면 Fusion 360에서 현재 시트의 컨텐츠에 따라 테이블 유형을 자동으로 결정합니다. 부품 리스트는 구성요소, 조립품 및 애니메이션 참조에 대해 작성됩니다. 절곡부 테이블은 판금 플랫 패턴 참조에 대해 작성됩니다."/>
	<label commandName="lclzFusionDrawingNewTableTipsDesc5" devLabel="To change the part number, part name, or description of a component, open the design in the Design workspace. In the browser, right-click the component, select Properties, and edit the properties in the dialog." translation="구성요소의 부품 번호, 부품 이름 또는 설명을 변경하려면 디자인 작업공간에서 디자인을 엽니다. 브라우저에서 구성요소를 마우스 오른쪽 버튼으로 클릭하고 특성을 선택한 다음 대화상자에서 특성을 편집합니다."/>
	<label commandName="lclzFusionDrawingNewTableTipsDesc6" devLabel="When Type is set to Automatic, Fusion 360 determines the table type automatically, based on the contents of the current sheet. Parts lists are created for component, assembly, and animation references. Bend tables are created for sheet metal flat pattern references." translation="유형이 자동으로 설정되어 있으면 Fusion 360에서 현재 시트의 컨텐츠에 따라 테이블 유형을 자동으로 결정합니다. 부품 리스트는 구성요소, 조립품 및 애니메이션 참조에 대해 작성됩니다. 절곡부 테이블은 판금 플랫 패턴 참조에 대해 작성됩니다."/>
	<label commandName="lclzFusionDrawingNewTableTipsDesc7" devLabel="When Type is set to Automatic, Fusion 360 determines the table type automatically, based on the contents of the current sheet. Parts lists are created for component, assembly, and animation references. Bend tables are created for sheet metal flat pattern references." translation="유형이 자동으로 설정되어 있으면 Fusion 360에서 현재 시트의 컨텐츠에 따라 테이블 유형을 자동으로 결정합니다. 부품 리스트는 구성요소, 조립품 및 애니메이션 참조에 대해 작성됩니다. 절곡부 테이블은 판금 플랫 패턴 참조에 대해 작성됩니다."/>
	<label commandName="lclzFusionDrawingNewTableTipsDesc8" devLabel="When Type is set to Automatic, Fusion 360 determines the table type automatically, based on the contents of the current sheet. Parts lists are created for component, assembly, and animation references. Bend tables are created for sheet metal flat pattern references." translation="유형이 자동으로 설정되어 있으면 Fusion 360에서 현재 시트의 컨텐츠에 따라 테이블 유형을 자동으로 결정합니다. 부품 리스트는 구성요소, 조립품 및 애니메이션 참조에 대해 작성됩니다. 절곡부 테이블은 판금 플랫 패턴 참조에 대해 작성됩니다."/>
	<label commandName="lclzFusionDrawingNewTableTipsDesc9" devLabel="When Type is set to Automatic, Fusion 360 determines the table type automatically, based on the contents of the current sheet. Parts lists are created for component, assembly, and animation references. Bend tables are created for sheet metal flat pattern references." translation="유형이 자동으로 설정되어 있으면 Fusion 360에서 현재 시트의 컨텐츠에 따라 테이블 유형을 자동으로 결정합니다. 부품 리스트는 구성요소, 조립품 및 애니메이션 참조에 대해 작성됩니다. 절곡부 테이블은 판금 플랫 패턴 참조에 대해 작성됩니다."/>
	<label commandName="lclzFusionDrawingNewTableTipsTips1" devLabel="When you place a table on the bottom half of the sheet, the column labels flip to the bottom of the table. For parts lists and bend tables, the numbered rows are ordered from bottom to top. To lock or unlock the table flipping feature, press the Shift key." translation="시트 하반부에 테이블을 배치하면 열 레이블이 테이블의 저면도로 반전됩니다. 부품 리스트 및 절곡부 테이블의 경우 번호가 매겨진 행이 저면도에서 상단까지 정렬됩니다. 테이블 반전 피쳐를 잠그거나 잠금해제하려면 Shift 키를 누르십시오."/>
	<label commandName="lclzFusionDrawingNewTableTipsTips2" devLabel="When you place a table on the bottom half of the sheet, the column labels flip to the bottom of the table. For parts lists and bend tables, the numbered rows are ordered from bottom to top. To lock or unlock the table flipping feature, press the Shift key." translation="시트 하반부에 테이블을 배치하면 열 레이블이 테이블의 저면도로 반전됩니다. 부품 리스트 및 절곡부 테이블의 경우 번호가 매겨진 행이 저면도에서 상단까지 정렬됩니다. 테이블 반전 피쳐를 잠그거나 잠금해제하려면 Shift 키를 누르십시오."/>
	<label commandName="lclzFusionDrawingNewTableTipsTips3" devLabel="When you place a table on the bottom half of the sheet, the column labels flip to the bottom of the table. For parts lists and bend tables, the numbered rows are ordered from bottom to top. To lock or unlock the table flipping feature, press the Shift key." translation="시트 하반부에 테이블을 배치하면 열 레이블이 테이블의 저면도로 반전됩니다. 부품 리스트 및 절곡부 테이블의 경우 번호가 매겨진 행이 저면도에서 상단까지 정렬됩니다. 테이블 반전 피쳐를 잠그거나 잠금해제하려면 Shift 키를 누르십시오."/>
	<label commandName="lclzFusionDrawingNewTableTipsTips4" devLabel="When you place a table on the bottom half of the sheet, the column labels flip to the bottom of the table. For parts lists and bend tables, the numbered rows are ordered from bottom to top. To lock or unlock the table flipping feature, press the Shift key." translation="시트 하반부에 테이블을 배치하면 열 레이블이 테이블의 저면도로 반전됩니다. 부품 리스트 및 절곡부 테이블의 경우 번호가 매겨진 행이 저면도에서 상단까지 정렬됩니다. 테이블 반전 피쳐를 잠그거나 잠금해제하려면 Shift 키를 누르십시오."/>
	<label commandName="lclzFusionDrawingNewTableTipsTips5" devLabel="In complex assemblies, if you want to display all component levels, switch the Structure setting from First Level to All Levels." translation="복잡한 조립품에서 모든 구성요소 수준을 표시하려면 첫 번째 단계에서 모든 단계로 구조 설정을 전환합니다."/>
	<label commandName="lclzFusionDrawingNewTableTipsTips6" devLabel="When you place a table on the bottom half of the sheet, the column labels flip to the bottom of the table. For parts lists and bend tables, the numbered rows are ordered from bottom to top. To lock or unlock the table flipping feature, press the Shift key." translation="시트 하반부에 테이블을 배치하면 열 레이블이 테이블의 저면도로 반전됩니다. 부품 리스트 및 절곡부 테이블의 경우 번호가 매겨진 행이 저면도에서 상단까지 정렬됩니다. 테이블 반전 피쳐를 잠그거나 잠금해제하려면 Shift 키를 누르십시오."/>
	<label commandName="lclzFusionDrawingNewTableTipsTips7" devLabel="When you place a table on the bottom half of the sheet, the column labels flip to the bottom of the table. For parts lists and bend tables, the numbered rows are ordered from bottom to top. To lock or unlock the table flipping feature, press the Shift key." translation="시트 하반부에 테이블을 배치하면 열 레이블이 테이블의 저면도로 반전됩니다. 부품 리스트 및 절곡부 테이블의 경우 번호가 매겨진 행이 저면도에서 상단까지 정렬됩니다. 테이블 반전 피쳐를 잠그거나 잠금해제하려면 Shift 키를 누르십시오."/>
	<label commandName="lclzFusionDrawingNewTableTipsTips8" devLabel="When you place a table on the bottom half of the sheet, the column labels flip to the bottom of the table. For parts lists and bend tables, the numbered rows are ordered from bottom to top. To lock or unlock the table flipping feature, press the Shift key." translation="시트 하반부에 테이블을 배치하면 열 레이블이 테이블의 저면도로 반전됩니다. 부품 리스트 및 절곡부 테이블의 경우 번호가 매겨진 행이 저면도에서 상단까지 정렬됩니다. 테이블 반전 피쳐를 잠그거나 잠금해제하려면 Shift 키를 누르십시오."/>
	<label commandName="lclzFusionDrawingNewTableTipsTips9" devLabel="When you place a table on the bottom half of the sheet, the column labels flip to the bottom of the table. For parts lists and bend tables, the numbered rows are ordered from bottom to top. To lock or unlock the table flipping feature, press the Shift key." translation="시트 하반부에 테이블을 배치하면 열 레이블이 테이블의 하단으로 반전됩니다. 부품 리스트 및 절곡부 테이블의 경우 번호가 매겨진 행이 하단에서 상단까지 정렬됩니다. 테이블 반전 피쳐를 잠그거나 잠금해제하려면 Shift 키를 누르십시오."/>
	<label commandName="lclzFusionDrawingNewTableTipsTitle1" devLabel="Table Information" translation="테이블 정보"/>
	<label commandName="lclzFusionDrawingNewTableTipsTitle2" devLabel="Table Information" translation="테이블 정보"/>
	<label commandName="lclzFusionDrawingNewTableTipsTitle3" devLabel="Table Information" translation="테이블 정보"/>
	<label commandName="lclzFusionDrawingNewTableTipsTitle4" devLabel="Table Information" translation="테이블 정보"/>
	<label commandName="lclzFusionDrawingNewTableTipsTitle5" devLabel="Edit Parts List Information" translation="부품 리스트 정보 편집"/>
	<label commandName="lclzFusionDrawingNewTableTipsTitle6" devLabel="Table Information" translation="테이블 정보"/>
	<label commandName="lclzFusionDrawingNewTableTipsTitle7" devLabel="Table Information" translation="테이블 정보"/>
	<label commandName="lclzFusionDrawingNewTableTipsTitle8" devLabel="Table Information" translation="테이블 정보"/>
	<label commandName="lclzFusionDrawingNewTableTipsTitle9" devLabel="Table Information" translation="테이블 정보"/>
	<label commandName="lclzFusionDrawingNote1" devLabel="Automatically creates a hole, thread, bend or leader note." translation="홀, 스레드, 절곡부 또는 지시선 주를 자동으로 작성합니다."/>
	<label commandName="lclzFusionDrawingNote2" devLabel="Select an edge or bend centerline, then place the text." translation="모서리 또는 절곡부 중심선을 선택한 후, 텍스트를 배치합니다."/>
	<label commandName="lclzFusionDrawingNote3" devLabel="For hole, thread and bend centerlines, information within the selected edge or bend centerline is automatically added as text." translation="홀, 스레드 및 절곡부 중심선의 경우 선택한 모서리 또는 절곡부 중심선 내의 정보는 텍스트로 자동으로 추가됩니다."/>
	<label commandName="lclzFusionDrawingNote4" devLabel="For all other edges, enter and format text as required." translation="다른 모든 모서리의 경우 필요에 따라 텍스트를 입력하고 형식을 지정합니다."/>
	<label commandName="lclzFusionDrawingOffset1" devLabel="Select the object to offset, enter the offset distance, then specify a point to define to side." translation="간격띄우기할 객체를 선택하고 간격띄우기 거리를 입력한 후, 측면에 정의할 점을 지정합니다."/>
	<label commandName="lclzFusionDrawingOrdinateDimension1" devLabel="Define view origins and place ordinate dimensions referencing them." translation="뷰 원점을 정의하고 이를 참조하는 세로좌표 치수를 배치합니다."/>
	<label commandName="lclzFusionDrawingOriginSymbolEdit1" devLabel="Edit the origin marker attributes." translation="원점 마커 속성을 편집합니다."/>
	<label commandName="lclzFusionDrawingOriginSymbolEdit2" devLabel="Edit the origin market attributes." translation="원점 마커 속성을 편집합니다."/>
	<label commandName="lclzFusionDrawingOriginSymbolEditTipsDesc" devLabel="Change the type of the origin marker. The selected type of the origin marker will be retained in Hole table edit dialog as well." translation="원점 마커의 유형을 변경합니다. 원점 마커의 선택된 유형은 홀 테이블 편집 대화상자에도 유지됩니다."/>
	<label commandName="lclzFusionDrawingOriginSymbolEditTipsTips" devLabel="Change origin marker type" translation="원점 마커 유형 변경"/>
	<label commandName="lclzFusionDrawingOriginSymbolEditTipsTitle" devLabel="Origin Edit Information" translation="원점 편집 정보"/>
	<label commandName="lclzFusionDrawingPartsListEdit1" devLabel="Creates a parts list based on an assembly, storyboard, component, or sheet metal component reference." translation="조립품, 스토리보드, 구성요소 또는 판금 구성요소 참조를 기반으로 부품 리스트를 작성합니다."/>
	<label commandName="lclzFusionDrawingPartsListEdit2" devLabel="Select a view, select the structure, place the table on the sheet, then adjust table direction and columns. Balloons are automatically added to associated views." translation="뷰를 선택하고 구조를 선택한 다음 시트에 테이블을 배치하고 테이블 방향과 열을 조정합니다. 품번기호는 연관된 뷰에 자동으로 추가됩니다."/>
	<label commandName="lclzFusionDrawingPartsListTable1" devLabel="Creates a parts list based on an assembly, storyboard, component, or sheet metal component reference." translation="조립품, 스토리보드, 구성요소 또는 판금 구성요소 참조를 기반으로 부품 리스트를 작성합니다."/>
	<label commandName="lclzFusionDrawingPartsListTable2" devLabel="Select a view, select the structure, place the table on the sheet, then adjust table direction and columns. Balloons are automatically added to associated views." translation="뷰를 선택하고 구조를 선택한 다음 시트에 테이블을 배치하고 테이블 방향과 열을 조정합니다. 품번기호는 연관된 뷰에 자동으로 추가됩니다."/>
	<label commandName="lclzFusionDrawingPartsListTipsDesc" devLabel="When Type is set to Automatic, Fusion 360 determines the table type automatically, based on the contents of the current sheet. Parts lists are created for component, assembly, and animation references. Bend tables are created for sheet metal flat pattern references." translation="유형이 자동으로 설정되어 있으면 Fusion 360에서 현재 시트의 컨텐츠에 따라 테이블 유형을 자동으로 결정합니다. 부품 리스트는 구성요소, 조립품 및 애니메이션 참조에 대해 작성됩니다. 절곡부 테이블은 판금 플랫 패턴 참조에 대해 작성됩니다."/>
	<label commandName="lclzFusionDrawingPartsListTipsTips" devLabel="When you place a table on the bottom half of the sheet, the column labels flip to the bottom of the table. For parts lists and bend tables, the numbered rows are ordered from bottom to top. To lock or unlock the table flipping feature, press the Shift key." translation="시트 하반부에 테이블을 배치하면 열 레이블이 테이블의 저면도로 반전됩니다. 부품 리스트 및 절곡부 테이블의 경우 번호가 매겨진 행이 저면도에서 상단까지 정렬됩니다. 테이블 반전 피쳐를 잠그거나 잠금해제하려면 Shift 키를 누르십시오."/>
	<label commandName="lclzFusionDrawingPartsListTipsTitle" devLabel="Table Information" translation="테이블 정보"/>
	<label commandName="lclzFusionDrawingPerspectiveView1" devLabel="Displays designs in three-point perspective." translation="디자인을 3점 원근법으로 표시합니다."/>
	<label commandName="lclzFusionDrawingPerspectiveView2" devLabel="Parallel lines converge on a vanishing point which provides a sense of how the human eye, or a camera, perceives real objects." translation="평행선은 소실점에서 만나는데, 이는 사람의 눈이나 카메라가 실제 사물을 어떻게 인지하는지에 대한 감각을 제공합니다."/>
	<label commandName="lclzFusionDrawingRadialDimension1" devLabel="Select a rounded edge, such as a fillet, hole, sphere, or cylinder, then place the dimension." translation="모깎기, 홀, 구, 원통 등의 둥근 모서리를 선택한 후, 치수를 배치합니다."/>
	<label commandName="lclzFusionDrawingRectangle1" devLabel="Creates a rectangle using 2 diagonal points." translation="두 대각선 점을 사용하여 직사각형을 작성합니다."/>
	<label commandName="lclzFusionDrawingRectangle2" devLabel="Specify the rectangle's start point, then specify a second point to define its width and height." translation="직사각형의 시작점을 지정한 후, 두 번째 점을 지정하여 폭과 높이를 정의합니다."/>
	<label commandName="lclzFusionDrawingRenumberTipsDesc" devLabel="You can renumber the first or last level in an all-level parts list. After you select the first balloon to renumber, any balloons that cannot be renumbered fade to grey." translation="모든 단계 부품 리스트의 첫 번째 또는 마지막 단계의 번호를 다시 매길 수 있습니다. 다시 번호매기기할 첫 번째 품번기호를 선택하면 다시 번호매기기할 수 없는 모든 품번기호는 회색으로 흐리게 표시됩니다."/>
	<label commandName="lclzFusionDrawingRenumberTipsTips" devLabel="Components in the parts list or bends in the bend table automatically reorder as you renumber balloons or bend identifiers." translation="품번기호 또는 절곡부 식별자의 번호를 다시 매기면 부품 리스트의 구성요소 또는 절곡부 테이블의 절곡부가 자동으로 재정렬됩니다."/>
	<label commandName="lclzFusionDrawingRenumberTipsTitle" devLabel="Renumber Information" translation="다시 번호매기기 정보"/>
	<label commandName="lclzFusionDrawingRevCloud1" devLabel="Creates a revision cloud shape based on multiple input points." translation="여러 입력 점을 기준으로 구름형 리비전 쉐이프를 작성합니다."/>
	<label commandName="lclzFusionDrawingRevCloud2" devLabel="Select the cloud to edit the shape using the points and grips." translation="점과 그립을 사용하여 쉐이프를 편집하려면 구름을 선택합니다."/>
	<label commandName="lclzFusionDrawingRevMarker1" devLabel="Creates a revision marker at the selected location." translation="선택한 위치에 리비전 마커를 작성합니다."/>
	<label commandName="lclzFusionDrawingRevMarker2" devLabel="Double click the marker to edit the marker designation." translation="마커를 두 번 클릭하여 마커 지정을 편집합니다."/>
	<label commandName="lclzFusionDrawingRevMarkerTipsDesc" devLabel="To select and change the revision history for the revision marker to be added" translation="추가할 리비전 표식기에 대한 리비전 내역을 선택하고 변경하려면"/>
	<label commandName="lclzFusionDrawingRevMarkerTipsTips" devLabel="Choose the revision history for the revision marker from the dropdown" translation="드롭다운에서 리비전 표식기에 대한 리비전 내역을 선택합니다."/>
	<label commandName="lclzFusionDrawingRevMarkerTipsTitle" devLabel="Revision Marker Information" translation="리비전 마커 정보"/>
	<label commandName="lclzFusionDrawingRevisionTable1" devLabel="Creates a revision history for the active sheet." translation="활성 시트에 대한 리비전 내역을 작성합니다."/>
	<label commandName="lclzFusionDrawingRevisionTable2" devLabel="Click a vertex or point to place the history table. Press shift to toggle interactive flipping." translation="사용내역 테이블을 배치할 꼭지점 또는 점을 클릭합니다. 대화식 반전을 전환하려면 Shift 키를 누릅니다."/>
	<label commandName="lclzFusionDrawingRevisionTableEdit" devLabel="Edits a revision history." translation="리비전 내역을 편집합니다."/>
	<label commandName="lclzFusionDrawingRevisionTableEditTipsDesc" devLabel="To add or remove the revision histories. Choose the visibility of the revision histories in the table. Add or remove generic rows to add generic data in the table. To change the text style of the selected cells and to change the visibility of the columns in the table." translation="리비전 내역을 추가하거나 제거하려면. 테이블에서 리비전 내역의 가시성을 선택합니다. 일반 행을 추가하거나 제거하여 테이블에 일반 데이터를 추가합니다. 선택한 셀의 문자 스타일을 변경하고 테이블에서 열의 가시성을 변경하려면."/>
	<label commandName="lclzFusionDrawingRevisionTableEditTipsTips" devLabel="Edit revision history, generic rows. Control visibility of the revision histories. Change text style of the data in revision table." translation="리비전 내역, 일반 행을 편집합니다. 리비전 내역의 가시성을 제어합니다. 리비전 테이블에서 데이터의 문자 스타일을 변경합니다."/>
	<label commandName="lclzFusionDrawingRevisionTableEditTipsTitle" devLabel="Revision history Information" translation="리비전 내역 정보"/>
	<label commandName="lclzFusionDrawingRotate1" devLabel="Select objects to rotate, then click Transform. Then specify a base point and a rotation angle." translation="회전할 객체를 선택한 후, 변환을 클릭합니다. 그런 다음 기준점 및 회전 각도를 지정합니다."/>
	<label commandName="lclzFusionDrawingRotateTipsDesc" devLabel="If you want to redefine your selected objects or re-specify the base point without canceling the command, click Selection to return to Selection mode." translation="명령을 취소하지 않고 선택한 객체를 재정의하거나 기준점을 다시 지정하려면 선택을 클릭하여 선택 모드로 돌아갑니다."/>
	<label commandName="lclzFusionDrawingRotateTipsTips" devLabel="After specifying a base point, click Reference Selection to define a reference angle along an edge or between any two points. " translation="기준점을 지정한 후 참조 선택을 클릭하여 모서리를 따라 또는 두 점 사이에서 참조 각도를 정의합니다. "/>
	<label commandName="lclzFusionDrawingRotateTipsTitle" devLabel="Rotate Information" translation="회전 정보"/>
	<label commandName="lclzFusionDrawingSingleDim1" devLabel="Creates linear, aligned, angular, radius, and diameter dimensions." translation="선형, 정렬, 각도, 반지름 및 지름 치수를 작성합니다."/>
	<label commandName="lclzFusionDrawingSingleDim2" devLabel="Select objects, points, edges, existing dimensions, or select two points. Then place the dimension. The most appropriate dimension type is created." translation="객체, 점, 모서리, 기존 치수 또는 두 점을 선택합니다. 그런 다음 치수를 배치합니다. 가장 적절한 치수 유형이 작성됩니다."/>
	<label commandName="lclzFusionDrawingSketchClose1" devLabel="Closes the sketch editing mode." translation="스케치 편집 모드를 닫습니다."/>
	<label commandName="lclzFusionDrawingSketchCreate1" devLabel="Enters Sketch mode and creates a new sketch on the current sheet." translation="스케치 모드를 시작하고 현재 시트에 새 스케치를 작성합니다."/>
	<label commandName="lclzFusionDrawingSketchCreate2" devLabel="Select Finish Sketch to exit out of the mode." translation="스케치 마침을 선택하여 모드를 종료합니다."/>
	<label commandName="lclzFusionDrawingSketchSmartDimL1" devLabel="Create sketch dimensions for sketch geometries. Use dimensions to control the size or position of sketch objects." translation="스케치 형상에 대한 스케치 치수를 작성합니다. 치수를 사용하여 스케치 객체의 크기나 위치를 제어합니다."/>
	<label commandName="lclzFusionDrawingSketchSmartDimL2" devLabel="Select the sketch objects to dimension, then select an area to position the dimension." translation="치수기입할 스케치 객체를 선택한 다음 치수를 배치할 영역을 선택합니다."/>
	<label commandName="lclzFusionDrawingSurfaceTexture1" devLabel="Creates a surface texture symbol." translation="곡면 텍스처 기호를 작성합니다."/>
	<label commandName="lclzFusionDrawingSurfaceTexture2" devLabel="Select an edge, dimension extension line or feature control frame, place the surface texture symbol, then add type, requirements and process." translation="모서리, 치수 치수보조선 또는 형상 공차를 선택하고 곡면 텍스처 기호를 배치한 후, 유형, 요구사항 및 프로세스를 추가합니다."/>
	<label commandName="lclzFusionDrawingSurfaceTextureTipsDesc" devLabel="To attach a surface texture symbol to a surface in an ISO drawing, select an edge, right-click and select Surface from the contextual menu." translation="곡면 텍스처 기호를 ISO 도면의 곡면에 부착하려면 모서리를 선택하고 마우스 오른쪽 버튼을 클릭한 다음 상황별 메뉴에서 곡면을 선택합니다."/>
	<label commandName="lclzFusionDrawingSurfaceTextureTipsTips" devLabel="The properties available within the command dialog depend on the drafting standard used by the drawing and the selected symbol type." translation="명령 대화상자에서 사용할 수 있는 특성은 도면에서 사용되는 제도 표준과 선택한 기호 유형에 따라 다릅니다."/>
	<label commandName="lclzFusionDrawingSurfaceTextureTipsTitle" devLabel="Surface Texture Information" translation="곡면 텍스처 정보"/>
	<label commandName="lclzFusionDrawingSymbolEdit1" devLabel="Edit a symbol." translation="기호를 편집합니다."/>
	<label commandName="lclzFusionDrawingTable" devLabel="Insert a blank table to add data manually." translation="데이터를 수동으로 추가하려면 빈 테이블을 삽입합니다."/>
	<label commandName="lclzFusionDrawingTableEditTipsDesc" devLabel="To change the width of a single column, select a cell and adjust the grips that appear around the cell. The overall width of the table changes but the other columns maintain their widths. To change the width of a column without changing the overall width of the table, click the table or cell border to select the whole table, then adjust the grips that appear at the table columns." translation="단일 열의 폭을 변경하려면 셀을 선택하고 셀 주위에 나타나는 그립을 조정합니다. 테이블의 전체 폭은 변경되지만 다른 열은 폭을 유지합니다. 테이블의 전체 폭을 변경하지 않고 열의 폭을 변경하려면 테이블 또는 셀 경계를 클릭하여 전체 테이블을 선택한 후, 테이블 열에 나타나는 그립을 조정합니다."/>
	<label commandName="lclzFusionDrawingTableEditTipsTips" devLabel="To edit the contents of a table cell, select the cell and double-click. To replace the entire contents of a cell, select it, then start typing." translation="테이블 셀의 내용을 편집하려면 셀을 선택하고 두 번 클릭합니다. 셀의 전체 내용을 대치하려면 셀을 선택한 후, 입력을 시작합니다."/>
	<label commandName="lclzFusionDrawingTableEditTipsTitle" devLabel="Edit Table Information" translation="테이블 정보 편집"/>
	<label commandName="lclzFusionDrawingTaperSlopeSymbol1" devLabel="Creates a taper and slope symbol." translation="테이퍼 및 기울기 기호를 작성합니다."/>
	<label commandName="lclzFusionDrawingTaperSlopeSymbol2" devLabel="Select an edge, place the taper and slope symbol, then add type and slope/taper dimensions." translation="모서리를 선택하고 테이퍼 및 기울기 기호를 배치한 후, 유형 및 기울기/테이퍼 치수를 추가합니다."/>
	<label commandName="lclzFusionDrawingTaperSlopeSymbolTipsTips" devLabel="Available taper and slope symbol icons vary based on the drawing standard being used (ISO or ASME). This is set when the drawing is created and cannot be changed." translation="사용 가능한 테이퍼 및 기울기 기호 아이콘은 사용 중인 도면 표준(ISO 또는 ASME)에 따라 다릅니다. 이는 도면 작성 시 설정되고 변경할 수 없습니다."/>
	<label commandName="lclzFusionDrawingTaperSlopeSymbolTipsTitle" devLabel="Taper and Slope Information" translation="테이퍼 및 기울기 정보"/>
	<label commandName="lclzFusionDrawingTemplateImageInsert1" devLabel="Inserts an image into the current sheet." translation="이미지를 현재 시트에 삽입합니다."/>
	<label commandName="lclzFusionDrawingTemplateImageInsert2" devLabel="Select an image in insert, place the image, then format as required." translation="삽입의 이미지를 선택하고 이미지를 배치한 후, 필요에 따라 형식을 지정합니다."/>
	<label commandName="lclzFusionDrawingTidyUpCommand" devLabel="Auto rearranges objects in the sheet to keep the layout tidy." translation="시트에서 객체를 자동으로 재정렬하여 배치를 깔끔하게 유지합니다."/>
	<label commandName="lclzFusionDrawingTitleBlockEditTipsDesc" devLabel="When you insert your own title block, the origin point (0,0) in the DWG will equate to the bottom right corner of the Fusion Drawing border." translation="사용자 고유의 제목 블록을 삽입하면 DWG의 원점(0,0)이 Fusion 도면 경계의 저면도 오른쪽 코너와 같아집니다."/>
	<label commandName="lclzFusionDrawingTitleBlockEditTipsTips" devLabel="The drawing's standard, ASME or ISO, defines the default title block. You can insert your own DWG file as a title block using Insert Title Block within Sheet Settings." translation="도면의 표준, ASME 또는 ISO는 기본 제목 블록을 정의합니다. 시트 설정 내의 제목 블록 삽입을 사용하여 사용자 고유의 DWG 파일을 제목 블록으로 삽입할 수 있습니다."/>
	<label commandName="lclzFusionDrawingTitleBlockEditTipsTitle" devLabel="Title Block Information" translation="제목 블록 정보"/>
	<label commandName="lclzFusionDrawingTrim1" devLabel="Select the objects to trim. All objects automatically become cutting boundaries." translation="자를 객체를 선택합니다. 모든 객체가 자동으로 절단 경계가 됩니다."/>
	<label commandName="lclzFusionDrawingViewAuxiliaryTipsDesc" devLabel="An auxiliary view automatically inherits the properties of the parent view. You can adjust the view's style, scale and edge visibility while creating the view, or change the settings later by double-clicking the auxiliary view." translation="보조 뷰는 상위 뷰의 특성을 자동으로 상속합니다. 뷰를 작성하는 동안 뷰의 스타일, 축척 및 모서리 가시성을 조정할 수도 있고, 나중에 보조 뷰를 두 번 클릭하여 설정을 변경할 수도 있습니다."/>
	<label commandName="lclzFusionDrawingViewAuxiliaryTipsTips" devLabel="An auxiliary view shows the true size and shape of a surface that is foreshortened in an orthographic view. The resulting view is aligned to the parent view." translation="보조 뷰는 직교 뷰에서 축소된 곡면의 실제 크기와 쉐이프를 보여줍니다. 결과 뷰는 상위 뷰에 정렬됩니다."/>
	<label commandName="lclzFusionDrawingViewAuxiliaryTipsTitle" devLabel="Auxiliary View Information" translation="보조 뷰 정보"/>
	<label commandName="lclzFusionDrawingViewBase1" devLabel="Creates a view of the referenced design." translation="참조된 설계의 뷰를 작성합니다."/>
	<label commandName="lclzFusionDrawingViewBase2" devLabel="Place the view, then adjust the view's orientation, style, scale, and edge visibility. Once created, projected, section and detail views are derived from this view." translation="뷰를 배치한 후, 뷰의 방향, 스타일, 축척 및 모서리 가시성을 조정합니다. 작성되고 투영되면 뷰, 단면 및 상세 뷰가 이 뷰에서 파생됩니다."/>
	<label commandName="lclzFusionDrawingViewBaseTemplate1" devLabel="Generates a base view placeholder." translation="기준 뷰 자리 표시자를 생성합니다."/>
	<label commandName="lclzFusionDrawingViewBaseTemplate2" devLabel="When the drawing template is used to create a new drawing, the placeholder is updated to show the referenced design." translation="도면 템플릿이 새 도면을 작성하는 데 사용되면 자리 표시자가 업데이트되어 참조된 설계를 표시합니다."/>
	<label commandName="lclzFusionDrawingViewBaseTipsDesc" devLabel="Base view orientation can only be set during creation, while other attributes can be modified afterwards. Make sure the view orientation is how you'd like it before clicking OK." translation="기준 뷰 방향은 작성 중에만 설정할 수 있는 반면 다른 속성은 나중에 수정할 수 있습니다. 확인을 클릭하기 전에 뷰 방향이 원하는 대로 설정되었는지 확인하십시오."/>
	<label commandName="lclzFusionDrawingViewBaseTipsTips" devLabel="Generates a drawing view that is derived from your selected 3D model. You can use a base view as a parent for other views." translation="선택한 3D 모형에서 파생되는 도면 뷰를 생성합니다. 다른 뷰의 상위 항목으로 기준 뷰를 사용할 수 있습니다."/>
	<label commandName="lclzFusionDrawingViewBaseTipsTitle" devLabel="Base View Information" translation="기준 뷰 정보"/>
	<label commandName="lclzFusionDrawingViewDetail1" devLabel="Creates a circular detail view of a portion of the design." translation="설계의 부분의 원형 상세 뷰를 작성합니다."/>
	<label commandName="lclzFusionDrawingViewDetail2" devLabel="Select a parent view, specify the center point of the detail boundary, specify the size of the detail boundary, then place the detail view. The detail view's scale is increased to the next scale." translation="상위 뷰를 선택하고 상세 경계의 중심점을 지정하고 상세 경계의 크기를 지정한 후, 상세 뷰를 배치합니다. 상세 뷰의 축척이 다음 축척으로 증가합니다."/>
	<label commandName="lclzFusionDrawingViewDetailTipsDesc" devLabel="If you select the detail view boundary, you can use the gray grips to reposition the boundary. The detail view automatically updates." translation="상세 뷰 경계를 선택하는 경우 회색 그립을 사용하여 경계를 재배치할 수 있습니다. 그러면 상세 뷰가 자동으로 업데이트됩니다."/>
	<label commandName="lclzFusionDrawingViewDetailTipsTips" devLabel="Specify the center point of the area to magnify, specify the size of the boundary, then click to place the detail view. Modify the scale and edge visibility properties and click OK when done." translation="확대할 영역의 중심점을 지정하고 경계 크기를 지정한 후에 클릭하여 상세 뷰를 배치합니다. 축척 및 모서리 가시성 특성을 수정하고 작업이 완료되면 확인을 클릭합니다."/>
	<label commandName="lclzFusionDrawingViewDetailTipsTitle" devLabel="Detail View Information" translation="상세 뷰 정보"/>
	<label commandName="lclzFusionDrawingViewEdit1" devLabel="Select a view to modify its properties." translation="특성을 수정할 뷰를 선택합니다."/>
	<label commandName="lclzFusionDrawingViewEditTipsDesc" devLabel="Projected views, detail views, and section views inherit properties from their parent view. If the properties of a view change, it will no longer inherit the settings from its parent view. When creating shaded views, use the Improve View Quality checkbox to improve the render of shaded views. This is more evident with curved, long, thin detailed areas, but it may adversely affect performance and upload times." translation="투영된 뷰, 상세 뷰 및 단면도는 상위 뷰의 특성을 상속합니다. 뷰의 특성이 변경되면 상위 뷰의 설정을 더 이상 상속하지 않습니다. 음영처리된 뷰를 작성할 때 뷰 품질 향상 확인란을 사용하여 음영처리된 뷰의 렌더를 개선합니다. 이는 곡선의, 길고 얇은 상세 영역에서 더 명확하게 나타나지만 성능과 업로드 시간에 부정적인 영향을 줄 수 있습니다."/>
	<label commandName="lclzFusionDrawingViewEditTipsTips" devLabel="When moving a projected view, you can press Shift to break that view's alignment with its parent. For example, if a projected view's alignment is “locked” vertically or horizontally with a base view, you can click Move on the toolbar, select the view, then press Shift to “unlock” the alignment. Press Shift again to realign the view." translation="투영된 뷰를 이동할 때 Shift 키를 눌러 해당 뷰의 정렬을 뷰의 상위로 끊을 수 있습니다. 예를 들어, 투영된 뷰의 정렬이 기준 뷰로 수직 또는 수평으로 &quot;잠긴&quot; 경우 도구막대의 이동을 클릭하고 뷰를 선택한 후, Shift 키를 눌러 정렬을 &quot;잠금해제&quot;할 수 있습니다. 뷰를 재정렬하려면 Shift 키를 다시 누릅니다."/>
	<label commandName="lclzFusionDrawingViewEditTipsTitle" devLabel="View Edit Information" translation="뷰 편집 정보"/>
	<label commandName="lclzFusionDrawingViewProject1" devLabel="Creates projected orthogonal and isometric views of the design." translation="설계의 투영된 직교 및 등각투영 뷰를 작성합니다."/>
	<label commandName="lclzFusionDrawingViewProject2" devLabel="Select a parent view, then place projected views as required." translation="상위 뷰를 선택한 후, 필요에 따라 투영된 뷰를 배치합니다."/>
	<label commandName="lclzFusionDrawingViewProjectTemplate1" devLabel="Generates projected and isometric view placeholders." translation="투영된 뷰 및 등각투영 뷰 자리 표시자를 생성합니다."/>
	<label commandName="lclzFusionDrawingViewProjectTemplate2" devLabel="When the drawing template is used to create a new drawing, the placeholders are updated to show the referenced design." translation="도면 템플릿이 새 도면을 작성하는 데 사용된 경우 자리 표시자는 참조된 설계를 표시하도록 업데이트됩니다."/>
	<label commandName="lclzFusionDrawingViewSection1" devLabel="Creates a full, half, offset, or aligned section view through the design." translation="설계를 통해 전체, 절반, 간격띄우기 또는 정렬된 단면도를 작성합니다."/>
	<label commandName="lclzFusionDrawingViewSection2" devLabel="Select a parent view, specify the start point of the section line, specify addition points to define the section line, then place the section view." translation="상위 뷰를 선택하고 단면 선의 시작점을 지정하고 추가 점을 지정하여 단면선을 정의한 후, 단면도를 배치합니다."/>
	<label commandName="lclzFusionDrawingViewSectionTipsDesc" devLabel="To modify a section view, click an existing section line and adjust the gray grips. If the path of the section line changes, the section view automatically updates." translation="단면도를 수정하려면 기존 단면 선을 클릭한 다음 회색 그립을 조정합니다. 단면 선의 경로가 변경되면 단면도가 자동으로 업데이트됩니다."/>
	<label commandName="lclzFusionDrawingViewSectionTipsTips" devLabel="Click to specify the path of the section line. When complete, press Enter to generate the section view, then click to place it." translation="단면 선의 경로를 지정하려면 클릭합니다. 작업이 완료되면 Enter 키를 눌러 단면도를 생성한 후, 클릭하여 단면도를 배치합니다."/>
	<label commandName="lclzFusionDrawingViewSectionTipsTitle" devLabel="Section View Information" translation="단면도 정보"/>
	<label commandName="lclzFusionDrawingViewSimpleSection1" devLabel="Generates a simple (single segment cutting plane) section view from a drawing view." translation="도면 뷰에서 단순(단일 세그먼트 절단 평면) 단면도를 생성합니다."/>
	<label commandName="lclzFusionDrawingViewSimpleSection2" devLabel="Select a parent view, then specify the section line's start and end points, and then specify the insertion point for your section view." translation="상위 뷰를 지정하고 단면 선의 시작점과 끝점을 지정한 후, 단면도의 삽입점을 지정합니다."/>
	<label commandName="lclzFusionDrawingWeldSymbol1" devLabel="Creates a welding symbol." translation="용접 기호를 작성합니다."/>
	<label commandName="lclzFusionDrawingWeldSymbol2" devLabel="Select an edge, place the welding symbol, then add type, size, length and contour." translation="모서리를 선택하고 용접 기호를 배치한 후, 유형, 크기, 길이 및 윤곽선을 추가합니다."/>
	<label commandName="lclzFusionDrawingWeldSymbolTipsTips" devLabel="The available properties in the dialog box depend on which weld type is selected, and the drafting standard in use." translation="대화상자에서 사용할 수 있는 특성은 선택한 용접 유형과 사용 중인 제도 표준에 따라 다릅니다."/>
	<label commandName="lclzFusionDrawingWeldSymbolTipsTitle" devLabel="Welding Information" translation="용접 정보"/>
	<label commandName="lclzFusionEmptyTable1" devLabel="Creates a custom table." translation="사용자 테이블을 작성합니다."/>
	<label commandName="lclzFusionEmptyTable2" devLabel="Place the table, then adjust the table direction, number of columns, number of rows, and text alignment." translation="테이블을 배치한 후, 테이블 방향, 열 수, 행 수 및 텍스트 정렬을 조정합니다."/>
	<label commandName="lclzFusionHoleTable1" devLabel="Creates a hole table based on the origin you place in a drawing view." translation="도면 뷰에 배치한 원점을 기준으로 홀 테이블을 작성합니다."/>
	<label commandName="lclzFusionHoleTable2" devLabel="Selecting the origin point in the view automatically selects the view and assigns hole identifiers within the view." translation="뷰에서 원점을 선택하면 뷰가 자동으로 선택되고 뷰 내에 홀 식별자가 지정됩니다."/>
	<label commandName="lclzGeometry" devLabel="Geometry" translation="형상"/>
	<label commandName="lclzHistoryDesc1" devLabel="Shows historical records of changes, versions and revisions." translation="변경 사항, 버전 및 리비전의 내역 레코드를 표시합니다."/>
	<label commandName="lclzInsert" devLabel="Insert" translation="삽입"/>
	<label commandName="lclzInspect" devLabel="Inspect" translation="검사"/>
	<label commandName="lclzLinkedComponents" devLabel="External Components" translation="외부 구성요소"/>
	<label commandName="lclzLinkedComponentsTooltip" devLabel="Includes external components in your drawing." translation="도면에 외부 구성요소를 포함합니다."/>
	<label commandName="lclzManage" devLabel="Process Management" translation="프로세스 관리"/>
	<label commandName="lclzManageExtRefreshCmd" devLabel="Refresh" translation="새로 고침"/>
	<label commandName="lclzManageExtRefreshCmd1" devLabel="Updates process management data in the current view." translation="현재 뷰에서 프로세스 관리 데이터를 업데이트합니다."/>
	<label commandName="lclzManageExtRefreshCmd2" devLabel="The process management data you see can become out of date if someone else has made changes to referenced components. Use Refresh to make sure you are seeing the latest data." translation="다른 사용자가 참조된 구성요소를 변경한 경우 표시되는 프로세스 관리 데이터가 오래된 버전이 될 수 있습니다. 새로 고침을 사용하여 최신 데이터를 보고 있는지 확인하십시오."/>
	<label commandName="lclzManageTab" devLabel="MANAGE" translation="관리"/>
	<label commandName="lclzMaxSheetCountLabel" devLabel="The maximum number of sheets in a drawing is " translation="도면의 최대 시트 수: "/>
	<label commandName="lclzModesAutomatic" devLabel="Automatic" translation="자동"/>
	<label commandName="lclzModesAutomaticTooltip" devLabel="Automatic mode of creating drawing from design" translation="자동 모드로 디자인에서 도면 작성"/>
	<label commandName="lclzModesManual" devLabel="Manual" translation="수동"/>
	<label commandName="lclzModesManualTooltip" devLabel="Manual mode of creating drawing from design" translation="수동 모드로 디자인에서 도면 작성"/>
	<label commandName="lclzModify" devLabel="Modify" translation="수정"/>
	<label commandName="lclzNewFusionDrawingDocumentTipsDesc" devLabel="For more control over drawing defaults, make adjustments in Preferences in your User Name drop-down in the top right." translation="도면 기본값을 더 잘 제어하려면 상단 오른쪽에 있는 사용자 이름 드롭다운에서 기본 설정을 조정합니다."/>
	<label commandName="lclzNewFusionDrawingDocumentTipsTips" devLabel="Standard and Units cannot be changed once a drawing is created. Sheet size, however, can be adjusted at any time in Sheet Settings." translation="도면을 작성한 후에는 표준 및 단위를 변경할 수 없습니다. 그러나 시트 크기는 시트 설정에서 언제든지 조정할 수 있습니다."/>
	<label commandName="lclzNewFusionDrawingDocumentTipsTitle" devLabel="Create Drawing Information" translation="도면 작성 정보"/>
	<label commandName="lclzNewTitleBlockDesc" devLabel="After you select a source and click OK, the Title Block contextual environment opens, where you can create and modify geometry and text to customize the title block." translation="원본을 선택하고 확인을 클릭하면 제목 블록 상황별 환경이 열리고 여기에서 형상과 텍스트를 작성 및 수정하여 제목 블록을 사용자화할 수 있습니다."/>
	<label commandName="lclzNewTitleBlockTips" devLabel="Create a new title block based on an existing title block, from scratch, or from a DWG file." translation="기존 제목 블록을 기반으로 새 제목 블록을 처음부터 작성하거나 DWG 파일에서 작성합니다."/>
	<label commandName="lclzNewTitleBlockTipsAndTricksTitle" devLabel="New Title Block Information" translation="새 제목 블록 정보"/>
	<label commandName="lclzOutOfDateLine" devLabel="This sheet is out of date." translation="이 시트는 오래되었습니다."/>
	<label commandName="lclzOutOfDateLine2" devLabel="Click to refresh the sheet." translation="시트를 갱신하려면 클릭합니다."/>
	<label commandName="lclzReference" devLabel="From" translation="시작"/>
	<label commandName="lclzRefresh" devLabel="Refresh" translation="새로 고침"/>
	<label commandName="lclzRelease" devLabel="Release" translation="릴리즈"/>
	<label commandName="lclzSelectDrawingOrTemplate" devLabel="Select Drawing or Template File" translation="도면 또는 템플릿 파일 선택"/>
	<label commandName="lclzSelectTemplate" devLabel="Select Template" translation="템플릿 선택"/>
	<label commandName="lclzSheet" devLabel="Sheet" translation="시트"/>
	<label commandName="lclzSheet1" devLabel="Sheet1" translation="Sheet1"/>
	<label commandName="lclzSheetCountToolTip" devLabel="Selecting the Detect and Omit Fastener checkbox in the Document Settings may reduce the sheet count." translation="문서 설정에서 조임쇠 탐지 및 생략 확인란을 선택하면 시트 수를 줄일 수 있습니다."/>
	<label commandName="lclzSheetSize" devLabel="Sheet Size" translation="시트 크기"/>
	<label commandName="lclzSketchClose" devLabel="Sketch" translation="스케치"/>
	<label commandName="lclzSketchSymbolClose" devLabel="Sketch Symbol" translation="스케치 기호"/>
	<label commandName="lclzSketchSymbolTab" devLabel="SKETCH SYMBOL" translation="스케치 기호"/>
	<label commandName="lclzSketchTab" devLabel="SKETCH" translation="스케치"/>
	<label commandName="lclzStandard" devLabel="Standard" translation="표준"/>
	<label commandName="lclzStrOf" devLabel="of" translation="/"/>
	<label commandName="lclzSymbols" devLabel="Symbols" translation="기호"/>
	<label commandName="lclzTables" devLabel="Tables" translation="테이블"/>
	<label commandName="lclzTemplateHasNoConfiguration" devLabel="The selected drawing template's configuration can't be retrieved. Please open, save and close the drawing template and try again." translation="선택한 도면 템플릿의 구성을 검색할 수 없습니다. 도면 템플릿을 열고 저장하고 닫은 후 다시 시도하십시오."/>
	<label commandName="lclzTemplateSelect" devLabel="Select" translation="선택"/>
	<label commandName="lclzText" devLabel="Text" translation="텍스트"/>
	<label commandName="lclzTitleBlockManagementDesc" devLabel="Click the radio button next the title block to use it on the current sheet. Click the title block name to highlight it, then click the Rename or Delete icons to manage it." translation="현재 시트에서 사용할 제목 블록 옆의 라디오 버튼을 클릭합니다. 제목 블록 이름을 클릭하여 강조 표시한 후, 이름바꾸기 또는 삭제 아이콘을 클릭하여 관리합니다."/>
	<label commandName="lclzTitleBlockManagementTips" devLabel="You can manage multiple title blocks within the same design, to accommodate different sheet sizes and requirements." translation="같은 설계 내에서 여러 제목 블록을 관리하여 다양한 시트 크기 및 요구사항을 포함할 수 있습니다."/>
	<label commandName="lclzTitleBlockManagementTipsAndTricksTitle" devLabel="Title Block Management Information" translation="제목 블록 관리 정보"/>
	<label commandName="lclzTitleBlockPalette" devLabel="Title Block" translation="제목 블록"/>
	<label commandName="lclzTitleBlockTab" devLabel="TITLE BLOCK" translation="제목 블록"/>
	<label commandName="lclzUCADesc1" devLabel="Displays a list of changes made to the reference assembly and its external references." translation="참조 조립품 및 해당 외부 참조에 대한 변경 사항 리스트를 표시합니다."/>
	<label commandName="lclzUCADesc2" devLabel="Select a component to highlight it in the canvas." translation="구성요소를 선택하여 캔버스에서 강조 표시합니다."/>
	<label commandName="lclzUnits" devLabel="Units" translation="단위"/>
	<label commandName="lclzUnmatchedTemplate" devLabel="The selected template's configuration does not match the current drawing's configuration. Select a template using the same standard and units." translation="선택한 템플릿의 구성이 현재 도면의 구성과 일치하지 않습니다. 동일한 표준 및 단위를 사용하여 템플릿을 선택하십시오."/>
	<label commandName="lclzUntitled" devLabel="Untitled" translation="제목 없음"/>
	<label commandName="lclzViews" devLabel="Create" translation="작성"/>
	<label commandName="line" devLabel="Line" translation="선"/>
	<label commandName="m" devLabel="m" translation="m"/>
	<label commandName="middleCenter" devLabel="Middle Center" translation="중간 중심"/>
	<label commandName="middleLeft" devLabel="Middle Left" translation="중간 왼쪽"/>
	<label commandName="middleRight" devLabel="Middle Right" translation="중간 오른쪽"/>
	<label commandName="minDistToDim_ASME" devLabel="Minimum distance to dimension (ASME)" translation="치수기입할 최소 거리(ASME)"/>
	<label commandName="minDistToDim_ISO" devLabel="Minimum distance to dimension (ISO)" translation="치수기입할 최소 거리(ISO)"/>
	<label commandName="mm" devLabel="mm" translation="mm"/>
	<label commandName="multipleAlignment" devLabel="Multiple Alignments" translation="다중 정렬"/>
	<label commandName="newConfigTable" devLabel="Configuration Table" translation="구성 테이블"/>
	<label commandName="newHoleTable" devLabel="Hole Table" translation="홀 테이블"/>
	<label commandName="newLinkTable" devLabel="Link Table" translation="링크 테이블"/>
	<label commandName="newRevisionTable" devLabel="Revision History" translation="리비전 내역"/>
	<label commandName="newTableTypeAutomatic" devLabel="Automatic" translation="자동"/>
	<label commandName="newTableTypeAutomaticBendTable" devLabel="Bend Table" translation="절곡부 테이블"/>
	<label commandName="newTableTypeAutomaticPartList" devLabel="Parts List" translation="부품 리스트"/>
	<label commandName="newTableTypeBendTable" devLabel="Bend Table" translation="절곡부 테이블"/>
	<label commandName="newTableTypeEmptyTable" devLabel="Custom Table" translation="사용자 테이블"/>
	<label commandName="newTableTypePartsList" devLabel="Parts List" translation="부품 리스트"/>
	<label commandName="newViaPairsTable" devLabel="Via Pairs" translation="Via 쌍"/>
	<label commandName="noCustomLabelMsg" devLabel="You can't edit this label. To add a custom value, create a Custom Label." translation="이 레이블을 편집할 수 없습니다. 사용자 설정 값을 추가하려면 사용자 설정 레이블을 작성하십시오."/>
	<label commandName="noElectronicsDesignText1" devLabel="Your " translation="3D "/>
	<label commandName="noElectronicsDesignText10" devLabel="." translation="."/>
	<label commandName="noElectronicsDesignText2" devLabel="3D PCB" translation="PCB가"/>
	<label commandName="noElectronicsDesignText3" devLabel=" isn’t linked to an " translation=" 전자 제품 디자인 파일에"/>
	<label commandName="noElectronicsDesignText4" devLabel="Electronics Design File" translation="링크되어 있지 않습니다."/>
	<label commandName="noElectronicsDesignText6" devLabel="First link your 3D PCB before creating a drawing to access critical data like the " translation="도면층 스택 및 참조 지정자와 같은 중요한 데이터에 액세스하려면 도면을"/>
	<label commandName="noElectronicsDesignText7" devLabel="Layer Stack" translation="작성하기 전에"/>
	<label commandName="noElectronicsDesignText8" devLabel=" and " translation=" 먼저 "/>
	<label commandName="noElectronicsDesignText9" devLabel="Reference Designators" translation=" 먼저 3D PCB를 링크하십시오."/>
	<label commandName="noElectronicsDesignTitle" devLabel="Electronics Design is not linked" translation="전자 제품 디자인이 링크되지 않음"/>
	<label commandName="objectsToPassThrough" devLabel="Objects to pass through" translation="통과할 객체"/>
	<label commandName="openAssociatedElectronicsDesign1" devLabel="To create a drawing from a 3D PCB, you need to open the " translation="3D PCB에서 도면을 작성하려면 연관된 전자 제품 디자인을 "/>
	<label commandName="openAssociatedElectronicsDesign2" devLabel="associated electronics design" translation="여십시오"/>
	<label commandName="openAssociatedElectronicsDesign3" devLabel="." translation="."/>
	<label commandName="openElectronicsDesign" devLabel="Open Design" translation="디자인 열기"/>
	<label commandName="partsListExtension" devLabel=".csv" translation=".csv"/>
	<label commandName="pdfExtension" devLabel=".pdf" translation=".pdf"/>
	<label commandName="rectangle" devLabel="Rectangle" translation="직사각형"/>
	<label commandName="referenceGroup" devLabel="Reference" translation="참조"/>
	<label commandName="revDeleteRow" devLabel="Delete Selected Generic Row" translation="선택한 일반 행 삭제"/>
	<label commandName="revEditRows" devLabel="Generic Rows" translation="일반 행"/>
	<label commandName="revInsertRowAbove" devLabel="Insert Generic Row Above" translation="위에 일반 행 삽입"/>
	<label commandName="revInsertRowBelow" devLabel="Insert Generic Row Below" translation="아래에 일반 행 삽입"/>
	<label commandName="revScopeDrawing" devLabel="Drawing" translation="도면"/>
	<label commandName="revScopeSheet" devLabel="Sheet" translation="시트"/>
	<label commandName="shapeProfile" devLabel="Shape Profile" translation="쉐이프 프로파일"/>
	<label commandName="smartCenterMarkPattern" devLabel="Pattern" translation="패턴"/>
	<label commandName="smartCenterToCut" devLabel="Round Cuts" translation="원형 절단"/>
	<label commandName="smartCenterToExtrude" devLabel="Round Extrudes" translation="원형 돌출"/>
	<label commandName="smartCenterToFillet" devLabel="Fillet" translation="모깎기"/>
	<label commandName="smartCenterToHole" devLabel="Hole" translation="홀"/>
	<label commandName="spline" devLabel="Spline" translation="스플라인"/>
	<label commandName="tableDirection" devLabel="Table Direction" translation="테이블 방향"/>
	<label commandName="textAlignment" devLabel="Text Alignment" translation="텍스트 정렬"/>
	<label commandName="topCenter" devLabel="Top Center" translation="상단 중심"/>
	<label commandName="topLeft" devLabel="Top Left" translation="상단 왼쪽"/>
	<label commandName="topRight" devLabel="Top Right" translation="상단 오른쪽"/>
	<label commandName="topToBottom" devLabel="Down" translation="아래로"/>
</Resource>