<?xml version="1.0" encoding="utf-8"?><Resource>
	<label commandName="AddNewOffset" devLabel="New Offset" translation="Nuevo desfase"/>
	<label commandName="All" devLabel="All" translation="Todo"/>
	<label commandName="AllTooltip" devLabel="Extrudes through all visible bodies." translation="Extruye todos los cuerpos visibles."/>
	<label commandName="AutomaticOffset" devLabel="Automatic" translation="Automático"/>
	<label commandName="BREPConversionFailed" devLabel="T-Spline conversion failed" translation="Error de conversión de T-Spline"/>
	<label commandName="BooleanTypeOperation" devLabel="Operation" translation="Operación"/>
	<label commandName="CTCTangentProgationFailed" devLabel="Cannot compute Tangent Chain. Some geometry in the tangent chain is already selected in other selection set rows. Adjust selection sets before enabling Tangent Chain. " translation="No se puede calcular la cadena tangente. Parte de la geometría de la cadena tangente ya está seleccionada en otras filas del conjunto de selección. Ajuste los conjuntos de selección antes de activar la cadena tangente. "/>
	<label commandName="ChamferEdges0" devLabel="%1% Edge" translation="%1% Arista"/>
	<label commandName="ChamferEdgesMultiple" devLabel="%1% Edges" translation="%1% Aristas"/>
	<label commandName="ChamferFirstDistanceInput" devLabel="Distance" translation="Distancia"/>
	<label commandName="ChamferRowAngleIcon" devLabel="ChamferRowAngleIcon" translation="ChamferRowAngleIcon"/>
	<label commandName="ChamferRowAngleInput" devLabel="Angle" translation="Ángulo"/>
	<label commandName="ChamferRowDistanceOneIcon" devLabel="ChamferRowDistanceOneIcon" translation="ChamferRowDistanceOneIcon"/>
	<label commandName="ChamferRowDistanceOneInput" devLabel="Distance" translation="Distancia"/>
	<label commandName="ChamferRowDistanceTwoIcon" devLabel="ChamferRowDistanceTwoIcon" translation="ChamferRowDistanceTwoIcon"/>
	<label commandName="ChamferRowDistanceTwoInput" devLabel="Distance" translation="Distancia"/>
	<label commandName="ChamferRowLabel" devLabel="ChamferRowLabel" translation="ChamferRowLabel"/>
	<label commandName="ConfigAllDisplayNameKey" devLabel="All" translation="Todo"/>
	<label commandName="ConfigFlyParamDetailTooltip" devLabel="Check to configure %1%.&lt;br /&gt;&lt;br /&gt;" translation="Active esta opción para configurar %1%.&lt;br /&gt;&lt;br /&gt;"/>
	<label commandName="ConfigFlyParamDetailTooltipExpr" devLabel="Expression: %1%&lt;br /&gt;" translation="Expresión: %1%&lt;br /&gt;"/>
	<label commandName="ConfigFlyParamDetailTooltipUserName" devLabel="Parameter: %1%&lt;br /&gt;" translation="Parámetro: %1%&lt;br /&gt;"/>
	<label commandName="ConfigFlyParamDetailTooltipValue" devLabel="Value: %1%&lt;br /&gt;" translation="Valor: %1%&lt;br /&gt;"/>
	<label commandName="ConfigSuppressionDisplayNameKey" devLabel="Suppression" translation="Desactivación"/>
	<label commandName="ConfigurationsRestrictedMessage" devLabel="Create and manage multiple design variations so that you can improve your design efficiency." translation="Cree y administre múltiples variaciones de diseño para mejorar la eficiencia del diseño."/>
	<label commandName="ConfigurationsRestrictedTitle" devLabel="Configurations" translation="Configuraciones"/>
	<label commandName="ContinueOrRevert" devLabel="Do you want to capture the current position of moved components or revert components to their previous positions?" translation="¿Desea capturar la posición actual de los componentes desplazados o invertirlos a sus posiciones anteriores?"/>
	<label commandName="ContinueWithRevert" devLabel="Revert Position" translation="Invertir posición"/>
	<label commandName="ContinueWithSnapshot" devLabel="Capture Position" translation="Posición de captura"/>
	<label commandName="ConvertToPMDesign" devLabel="Change to Parametric Modeling" translation="Cambiar a modelado paramétrico"/>
	<label commandName="ConvertToPMDesignCmdDef" devLabel="Convert to Parametric Modeling desgin" translation="Convertir en diseño de modelado paramétrico"/>
	<label commandName="ConvertToPMDesignCmdTooltip" devLabel="&lt;b&gt;Change to Parametric Modeling Mode&lt;/b&gt;&lt;br/&gt;&lt;br/&gt;Changes the modeling mode for the design:&lt;ul&gt;&lt;li&gt;&lt;b&gt;Parametric:&lt;/b&gt; Captures parameters and features in the timeline as you create your design.&lt;/li&gt;&lt;li&gt;&lt;b&gt;Direct:&lt;/b&gt; Deletes all parameters and features in the timeline and lets you edit the design more quickly.&lt;/li&gt;&lt;/ul&gt;&lt;b&gt;Current mode: Direct&lt;/b&gt;" translation="&lt;b&gt;Cambiar al modo Modelado paramétrico&lt;/b&gt;&lt;br/&gt;&lt;br/&gt;Cambia el modo de modelado para el diseño:&lt;ul&gt;&lt;li&gt;&lt;b&gt;Paramétrico:&lt;/b&gt; captura los parámetros y las operaciones en la secuencia temporal a medida que se crea el diseño.&lt;/li&gt;&lt;li&gt;&lt;b&gt;Directo:&lt;/b&gt; suprime todos los parámetros y las operaciones de la secuencia temporal y permite editar el diseño con mayor rapidez.&lt;/li&gt;&lt;/ul&gt;&lt;b&gt;Modo actual: Directo&lt;/b&gt;"/>
	<label commandName="CutBody" devLabel="Body Participating In Cut" translation="Cuerpo que participa en el corte"/>
	<label commandName="CutComponent" devLabel="Component Participating In Cut" translation="Componente que participa en el corte"/>
	<label commandName="CutType" devLabel="Cut" translation="Cortar"/>
	<label commandName="CutTypeToolTip" devLabel="Cuts an area out of an existing body." translation="Corta un área de un cuerpo existente."/>
	<label commandName="DirectionType" devLabel="Direction" translation="Dirección"/>
	<label commandName="DisableConfigureTab" devLabel="Configure (unavailable) " translation="Configurar (no disponible) "/>
	<label commandName="DisableConfigureTabReason" devLabel="The Configure tab is unavailable because there are no aspects to configure in the current context. " translation="La ficha Configurar no está disponible porque no hay aspectos para configurar en el contexto actual. "/>
	<label commandName="Distance" devLabel="Distance" translation="Distancia"/>
	<label commandName="DistanceFieldShell" devLabel="Rounded Shell" translation="Vaciado redondeado"/>
	<label commandName="DistanceFieldShellToolTip" devLabel="Creates rounded offset corners. Use for complex geometry to create a full or partial result that you can modify with surface tools." translation="Crea esquinas de desfase redondeadas. Se utiliza para geometría compleja a fin de crear un resultado completo o parcial que se pueda modificar con herramientas de superficie."/>
	<label commandName="DistanceTooltip" devLabel="Extrudes to a distance that you specify." translation="Extruye a la distancia que se especifique."/>
	<label commandName="DynamicControlID" devLabel="DynamicControlID" translation="DynamicControlID"/>
	<label commandName="Edit" devLabel="Edit" translation="Editar"/>
	<label commandName="EmptyIDConfigOnFlyRequestHelper" devLabel="Unable to configure" translation="No se puede configurar"/>
	<label commandName="ExtentsType2" devLabel="Extent Type" translation="Tipo de extensión"/>
	<label commandName="Extrude" devLabel="Extrude" translation="Extruir"/>
	<label commandName="ExtrudeDistanceInput" devLabel="Distance" translation="Distancia"/>
	<label commandName="ExtrudeDistanceInputDesc" devLabel="Specify distance to extrude." translation="Especifique la distancia que desee extruir."/>
	<label commandName="ExtrudeProfileInput" devLabel="Profiles" translation="Perfiles"/>
	<label commandName="ExtrudeProfileInputDesc" devLabel="Select coplanar sketch profiles or faces to extrude." translation="Seleccione las caras o perfiles de boceto coplanares que desee extruir."/>
	<label commandName="ExtrudeSide1TaperAngleInput" devLabel="Taper Angle" translation="Ángulo de inclinación"/>
	<label commandName="ExtrudeSide1TaperAngleInputDesc" devLabel="Specify angle to taper extrusion." translation="Especifique el ángulo de extrusión de inclinación."/>
	<label commandName="ExtrudeSide2TaperAngleInput" devLabel="Taper Angle" translation="Ángulo de inclinación"/>
	<label commandName="ExtrudeSide2TaperAngleInputDesc" devLabel="Specify angle to taper extrusion." translation="Especifique el ángulo de extrusión de inclinación."/>
	<label commandName="ExtrudeTaperAngleInput" devLabel="Taper Angle" translation="Ángulo de inclinación"/>
	<label commandName="ExtrudeTaperAngleInputDesc" devLabel="Specify angle to taper extrusion." translation="Especifique el ángulo de extrusión de inclinación."/>
	<label commandName="ExtrudeTypeDesc" devLabel="Extrudes the entire area within selected closed profiles." translation="Extruye el área completa dentro de los perfiles cerrados seleccionados."/>
	<label commandName="ExtrudeTypeInfo" devLabel="Extrude" translation="Extruir"/>
	<label commandName="ExtrudeTypeLabel" devLabel="Type" translation="Tipo"/>
	<label commandName="FaceEdges0" devLabel="1 Face" translation="1 cara"/>
	<label commandName="FaceEdgesMultiple" devLabel="%1% Faces" translation="%1% Caras"/>
	<label commandName="FeatureAspectTooltipCof" devLabel="Check to configure %1%." translation="Active esta opción para configurar %1%."/>
	<label commandName="FeatureAspectValueTooltipCof" devLabel="Value" translation="Valor"/>
	<label commandName="FeatureEdges0" devLabel="1 Feature" translation="1 operación"/>
	<label commandName="FeatureEdgesMultiple" devLabel="%1% Features" translation="Funciones de %1%"/>
	<label commandName="FlipDirection" devLabel="Flip" translation="Cambiar"/>
	<label commandName="FlipDirectionTooltip" devLabel="Flips the extrusion over the selected profile plane." translation="Voltea la extrusión sobre el plano de perfil seleccionado."/>
	<label commandName="FromObjectStart" devLabel="Object" translation="Objeto"/>
	<label commandName="FromObjectStartTooltip" devLabel="Starts extrusion from a face or plane that you select." translation="Inicia la extrusión a partir de una cara o un plano seleccionado."/>
	<label commandName="FusionActivateLocalCompCmd" devLabel="Activate" translation="Activar"/>
	<label commandName="FusionChamfer" devLabel="Chamfer" translation="Chaflán"/>
	<label commandName="FusionCmdModifyDistanceSelections3" devLabel="Specify type, direction, thickness, or hold Command to modify selections" translation="Especifique el tipo, la dirección, el grosor o mantenga pulsada la tecla Comando para modificar las selecciones"/>
	<label commandName="FusionComputeAll" devLabel="Compute All" translation="Calcular todo"/>
	<label commandName="FusionCtrlModifyDistanceSelections3" devLabel="Specify type, direction, thickness, or hold Ctrl to modify selections" translation="Especifique el tipo, la dirección, el grosor o mantenga pulsada la tecla Ctrl para modificar las selecciones"/>
	<label commandName="FusionExtrudeEdit" devLabel="Edit Feature " translation="Editar operación "/>
	<label commandName="FusionFeatureEdit" devLabel="Edit Feature " translation="Editar operación "/>
	<label commandName="FusionMacModifySelectExtrude" devLabel="Hold Command to modify selection" translation="Mantener el comando para modificar la selección"/>
	<label commandName="FusionModifyDistanceSelections3" devLabel="Select a body to shell or faces to remove." translation="Seleccione un cuerpo para vaciar o las caras que desea eliminar."/>
	<label commandName="FusionOffsetFaces" devLabel="Offset Face" translation="Cara de desfase"/>
	<label commandName="FusionOffsetFacesEdit" devLabel="Edit Feature " translation="Editar operación "/>
	<label commandName="FusionSelectDistanceExtrude" devLabel="Specify distance and taper angle" translation="Especificar la distancia y el ángulo de inclinación"/>
	<label commandName="FusionSelectDistanceThinExtrude" devLabel="Specify wall thickness, distance, and taper angle" translation="Especificar el grosor, la distancia y el ángulo de inclinación de la pared"/>
	<label commandName="FusionSelectExtrudeToObject" devLabel="Select body, face, plane, or vertex to extrude to" translation="Seleccionar el cuerpo, la cara, el plano o el vértice al que extruir"/>
	<label commandName="FusionSelectFaceForOffset" devLabel="Select face(s) to offset" translation="Seleccionar caras para desfase"/>
	<label commandName="FusionSelectFaceShell" devLabel="Select faces to remove or body to shell" translation="Seleccionar caras a eliminar o cuerpo a vaciar"/>
	<label commandName="FusionSelectProfileExtrude" devLabel="Select sketch profiles or planar faces to extrude" translation="Seleccionar perfiles de boceto o caras planas para extruir"/>
	<label commandName="FusionSelectSketchProfileExtrude" devLabel="Select sketch profiles, sketch curves or planar faces to extrude" translation="Seleccionar perfiles de boceto, curvas de boceto o caras planas para extruir"/>
	<label commandName="FusionShellBody" devLabel="Shell" translation="Vaciado"/>
	<label commandName="FusionStatusHandlerASMMissesProcess" devLabel="Rail misses the profile" translation="El raíl no tiene el perfil"/>
	<label commandName="FusionStatusHandlerASMPointProcess" devLabel="self-intersection or bad geometry" translation="autointersección o geometría incorrecta"/>
	<label commandName="FusionStatusHandlerASMSmoothProcess" devLabel="Rail is not smooth" translation="El raíl no es uniforme"/>
	<label commandName="FusionSurfaceExtrudeEdit" devLabel="Edit Feature " translation="Editar operación "/>
	<label commandName="FusionWinModifySelectExtrude" devLabel="Hold Ctrl to modify selection" translation="Mantenga pulsada la tecla Ctrl para modificar la selección"/>
	<label commandName="HalfLength" devLabel="Half Length" translation="Media longitud"/>
	<label commandName="HalfLengthTooltip" devLabel="Extrudes the specified distance to each side." translation="Extruye la distancia especificada a cada lado."/>
	<label commandName="HoleDepthInput" devLabel="Depth" translation="Profundidad"/>
	<label commandName="HoleDiameterInput" devLabel="Diameter" translation="Diámetro"/>
	<label commandName="Incorrect_Sketch_Profile_normal" devLabel="The profile normal is reversed. It'll cause extrude direction flip. Try compute-all to recover before creating extrude." translation="La normal del perfil se ha invertido. Esto provocará un cambio de dirección tras la extrusión. Intente computar todo para recuperar antes de crear la extrusión."/>
	<label commandName="InputShellType" devLabel="Shell Type" translation="Tipo de vaciado"/>
	<label commandName="IntersectType" devLabel="Intersect" translation="Intersección"/>
	<label commandName="IntersectTypeToolTip" devLabel="Creates a body at the intersection of an existing body and the new body." translation="Crea un cuerpo en la intersección de un cuerpo existente y el nuevo cuerpo."/>
	<label commandName="InvisibleObjectWarningMsg" devLabel="The object that you are creating is not visible. Please toggle visibility in the browser." translation="El objeto que está creando no está visible. Active o desactive la visibilidad en el explorador."/>
	<label commandName="JoinType" devLabel="Join" translation="Unir"/>
	<label commandName="JoinTypeToolTip" devLabel="Combines the new body with an existing body." translation="Combina el nuevo cuerpo con un cuerpo existente."/>
	<label commandName="LegacyShell" devLabel="Sharp Shell" translation="Vaciado"/>
	<label commandName="LegacyShellToolTip" devLabel="Creates sharp offset corners." translation="Crea esquinas de desfase pronunciado."/>
	<label commandName="LoftChainingOption" devLabel="Chaining" translation="Encadenando"/>
	<label commandName="LoftChainingOptionDesc" devLabel="Automatically select connected geometry." translation="Seleccione automáticamente la geometría conectada."/>
	<label commandName="MatchShape2" devLabel="Extend" translation="Alargar"/>
	<label commandName="MaxSolutionTooltip" devLabel="Extrudes all the way through the selected body." translation="Extruye todo el cuerpo seleccionado."/>
	<label commandName="MissingExtrudeProfile" devLabel="missing profiles" translation="faltan perfiles"/>
	<label commandName="MissingOffsetFaces" devLabel="missing faces" translation="faltan caras"/>
	<label commandName="MissingShellFaces" devLabel="missing faces/body" translation="faltan caras/cuerpos"/>
	<label commandName="ModifyExistingOffset" devLabel="Modify Existing Feature" translation="Modificar operación existente"/>
	<label commandName="NewBodyInNewCompType" devLabel="New Component" translation="Nuevo componente"/>
	<label commandName="NewBodyInNewCompTypeToolTip" devLabel="Creates a new body in the new component." translation="Crea un nuevo cuerpo en el nuevo componente."/>
	<label commandName="NewBodyType" devLabel="New Body" translation="Cuerpo nuevo"/>
	<label commandName="NewBodyTypeToolTip" devLabel="Creates a new body in the active component." translation="Crea un nuevo cuerpo en el componente activo."/>
	<label commandName="NewTSplineBodyType" devLabel="New Body" translation="Cuerpo nuevo"/>
	<label commandName="NewTSplineBodyTypeToolTip" devLabel="Creates a new body in the active component." translation="Crea un nuevo cuerpo en el componente activo."/>
	<label commandName="OffsetFacesDistanceInput" devLabel="Distance" translation="Distancia"/>
	<label commandName="OffsetFacesFacesInput" devLabel="Faces" translation="Caras"/>
	<label commandName="OffsetPlaneStart" devLabel="Offset" translation="Desfase"/>
	<label commandName="OffsetPlaneStartTooltip" devLabel="Starts extrusion a specified offset distance from the profile plane." translation="Inicia la extrusión a una distancia de desfase especificada con respecto al plano del perfil."/>
	<label commandName="OffsetType" devLabel="Offset Type" translation="Tipo de desfase"/>
	<label commandName="OneSide" devLabel="One Side" translation="Un lado"/>
	<label commandName="OneSideTooltip" devLabel="Creates an extrusion on one side of the profile plane." translation="Crea una extrusión en un lado del plano del perfil."/>
	<label commandName="PositionDlgTitle" devLabel="Capture or revert component positions" translation="Capturar o invertir posiciones de componentes"/>
	<label commandName="PrimitivePlacementInput" devLabel="Placement" translation="Colocación"/>
	<label commandName="ProfilePlaneStart" devLabel="Profile Plane" translation="Plano de perfil"/>
	<label commandName="ProfilePlaneStartTooltip" devLabel="Starts extrusion from the profile plane." translation="Inicia la extrusión desde el plano del perfil."/>
	<label commandName="ProfileStartType" devLabel="Start" translation="Inicio"/>
	<label commandName="ReblendRadiusInput" devLabel="Radius" translation="Radio"/>
	<label commandName="RevertMovesPrompt" devLabel="Some component positions have changed.&#xA;&#xA;" translation="Algunas posiciones de componente han cambiado.&#xA;&#xA;"/>
	<label commandName="RevolveAlongAngleInput" devLabel="Angle" translation="Ángulo"/>
	<label commandName="RotateLocalXInput" devLabel="'X' Rotation" translation="Rotación 'X'"/>
	<label commandName="RotateLocalYInput" devLabel="'Y' Rotation" translation="Rotación 'Y'"/>
	<label commandName="RotateLocalZInput" devLabel="'Z' Rotation" translation="Rotación 'Z'"/>
	<label commandName="SelectStartFromObject" devLabel="Select face, plane, or vertex to extrude from" translation="Seleccionar la cara, el plano o el vértice desde el que extruir"/>
	<label commandName="ShellBodyFacesInput" devLabel="Faces/Body" translation="Caras/cuerpo"/>
	<label commandName="ShellBodyThicknessInsideInput" devLabel="Inside Thickness" translation="Espesor interior"/>
	<label commandName="ShellBodyThicknessInsideInputDesc" devLabel="Specify thickness for inside direction" translation="Especifique el espesor de la dirección interior"/>
	<label commandName="ShellBodyThicknessOutsideInput" devLabel="Outside Thickness" translation="Espesor exterior"/>
	<label commandName="ShellBodyThicknessOutsideInputDesc" devLabel="Specify thickness for outside direction" translation="Especifique el espesor de la dirección exterior"/>
	<label commandName="ShellBothDirection" devLabel="Both" translation="Ambos"/>
	<label commandName="ShellDirection" devLabel="Direction" translation="Dirección"/>
	<label commandName="ShellInsideDirection" devLabel="Inside" translation="Interior"/>
	<label commandName="ShellOutsideDirection" devLabel="Outside" translation="Exterior"/>
	<label commandName="ShellTangentOptionInput" devLabel="Tangent Chain" translation="Cadena tangente"/>
	<label commandName="Side1ExtentsType" devLabel="Extent Type" translation="Tipo de extensión"/>
	<label commandName="Side1ExtrudeDistanceInput" devLabel="Distance" translation="Distancia"/>
	<label commandName="Side1ExtrudeDistanceInputDesc" devLabel="Extrudes to a distance that you specify." translation="Extruye a la distancia que se especifique."/>
	<label commandName="Side1Group" devLabel="Side 1" translation="Lado 1"/>
	<label commandName="Side1MatchShape" devLabel="Extend" translation="Alargar"/>
	<label commandName="Side1SolutionType" devLabel="Extend" translation="Alargar"/>
	<label commandName="Side1ThinExtrudeWallLocation" devLabel="Wall Location" translation="Ubicación del muro"/>
	<label commandName="Side1ThinExtrudeWallThickness" devLabel="Wall Thickness" translation="Grosor del muro"/>
	<label commandName="Side1ThinExtrudeWallThicknessDesc" devLabel="Specify wall thickness for thin extrusion." translation="Especifique el grosor del muro para una extrusión fina."/>
	<label commandName="Side1ToObjectOffsetInput" devLabel="Offset" translation="Desfase"/>
	<label commandName="Side1ToObjectOffsetInputDesc" devLabel="Extrudes to a body, face, or plane that you select." translation="Extruye un cuerpo, una cara o un plano seleccionado."/>
	<label commandName="Side1ToObjectSelectInfo" devLabel="Object" translation="Objeto"/>
	<label commandName="Side1ToObjectSelectInfoDesc" devLabel="Select a body, face, or construction object to extrude to." translation="Seleccione un cuerpo, una cara o un objeto de construcción para extruir."/>
	<label commandName="Side2ExtentsType" devLabel="Extent Type" translation="Tipo de extensión"/>
	<label commandName="Side2Group" devLabel="Side 2" translation="Lado 2"/>
	<label commandName="Side2MatchShape" devLabel="Extend" translation="Alargar"/>
	<label commandName="Side2SolutionType" devLabel="Extend" translation="Alargar"/>
	<label commandName="Side2ThinExtrudeWallLocation" devLabel="Wall Location" translation="Ubicación del muro"/>
	<label commandName="Side2ThinExtrudeWallThickness" devLabel="Wall Thickness" translation="Grosor del muro"/>
	<label commandName="Side2ThinExtrudeWallThicknessDesc" devLabel="Specify wall thickness for thin extrusion." translation="Especifique el grosor del muro para una extrusión fina."/>
	<label commandName="Side2ToObjectOffsetInput" devLabel="Offset" translation="Desfase"/>
	<label commandName="Side2ToObjectSelectInfo" devLabel="Object" translation="Objeto"/>
	<label commandName="Side2ToObjectSelectInfoDesc" devLabel="Select a body, face, or construction object to extrude to." translation="Seleccione un cuerpo, una cara o un objeto de construcción para extruir."/>
	<label commandName="SolutionType" devLabel="Extend" translation="Alargar"/>
	<label commandName="SphereDiameter" devLabel="Diameter" translation="Diámetro"/>
	<label commandName="SurfaceExtrude" devLabel="Extrude" translation="Extruir"/>
	<label commandName="Symmetric" devLabel="Symmetric" translation="Simétrico"/>
	<label commandName="SymmetricDistanceMeasurementType" devLabel="Measurement" translation="Medida"/>
	<label commandName="SymmetricTooltip" devLabel="Creates identical extrusions on each side of the profile plane." translation="Crea extrusiones idénticas en cada lado del plano del perfil."/>
	<label commandName="TSplinePipeEditEntityModify" devLabel="Modifying this sketch, edge or component will dissolve the Sculpt Pipe feature.  Undo to maintain Sculpt Pipe feature." translation="Al modificar este boceto, arista o componente, se disolverá la característica Esculpir tubería. Deshaga esta acción para mantener la característica Esculpir tubería."/>
	<label commandName="TSplineSurfaceCreatedByPipe1" devLabel="Modifying the selected entity will dissolve the Sculpt Pipe feature.  Cancel to maintain Sculpt Pipe feature." translation="Al modificar la entidad seleccionada, se disolverá la característica Esculpir tubería. Cancele esta acción para mantener la característica Esculpir tubería."/>
	<label commandName="TSplineSurfaceCreatedByPipe2" devLabel="Deleting the selected entity will dissolve the Sculpt Pipe feature.  Undo to maintain Sculpt Pipe feature." translation="Al suprimir la entidad seleccionada, se disolverá la característica Esculpir tubería. Deshaga esta acción para mantener la característica Esculpir tubería."/>
	<label commandName="ThinExtrudeTypeDesc" devLabel="Extrudes a thin wall along selected open or closed profiles." translation="Extruye una pared fina a lo largo de los perfiles abiertos o cerrados seleccionados."/>
	<label commandName="ThinExtrudeTypeInfo" devLabel="Thin Extrude" translation="Extrusión fina"/>
	<label commandName="ThinExtrudeWallLocation" devLabel="Wall Location" translation="Ubicación del muro"/>
	<label commandName="ThinExtrudeWallLocationCenter" devLabel="Center" translation="Centro"/>
	<label commandName="ThinExtrudeWallLocationCenterDesc" devLabel="Centers the extrusion on the profile." translation="Centra la extrusión en el perfil."/>
	<label commandName="ThinExtrudeWallLocationSide1" devLabel="Side 1" translation="Lado 1"/>
	<label commandName="ThinExtrudeWallLocationSide1Desc" devLabel="Offsets extrusion to one side of the profile." translation="Desfasa la extrusión a un lado del perfil."/>
	<label commandName="ThinExtrudeWallLocationSide2" devLabel="Side 2" translation="Lado 2"/>
	<label commandName="ThinExtrudeWallLocationSide2Desc" devLabel="Offsets extrusion to one side of the profile." translation="Desfasa la extrusión a un lado del perfil."/>
	<label commandName="ThinExtrudeWallThickness" devLabel="Wall Thickness" translation="Grosor del muro"/>
	<label commandName="ThinExtrudeWallThicknessDesc" devLabel="Specify wall thickness for thin extrusion." translation="Especifique el grosor del muro para una extrusión fina."/>
	<label commandName="ThroughBody" devLabel="Through Body" translation="A través de un cuerpo"/>
	<label commandName="ToAdjacentFaces" devLabel="To Adjacent Faces" translation="A caras adyacentes"/>
	<label commandName="ToAdjacentFacesTooltip" devLabel="Extrudes up to the selected face and any adjacent faces." translation="Extruye hasta la cara seleccionada y las caras adyacentes."/>
	<label commandName="ToBody" devLabel="To Body" translation="Hasta el cuerpo"/>
	<label commandName="ToBodyTooltip" devLabel="Extrudes up to the faces of the selected body." translation="Extruye hasta las caras del cuerpo seleccionado."/>
	<label commandName="ToNext" devLabel="To Next" translation="Al siguiente"/>
	<label commandName="ToObject" devLabel="To Object" translation="Al objeto"/>
	<label commandName="ToObjectOffsetInput" devLabel="Offset" translation="Desfase"/>
	<label commandName="ToObjectOffsetInputDesc" devLabel="Specify distance to offset extrusion from selected object." translation="Especifique la distancia de desfase de la extrusión desde el objeto seleccionado."/>
	<label commandName="ToObjectTooltip" devLabel="Extrudes to a body, face, or plane that you select." translation="Extruye un cuerpo, una cara o un plano seleccionado."/>
	<label commandName="ToSelectedFace" devLabel="To Selected Face" translation="Hasta la cara seleccionada"/>
	<label commandName="ToSelectedFaceTooltip" devLabel="Extrudes up to the selected face only." translation="Extruye hasta la cara seleccionada únicamente."/>
	<label commandName="TwoSides" devLabel="Two Sides" translation="Dos lados"/>
	<label commandName="TwoSidesTooltip" devLabel="Creates a unique extrusion on each side of the profile plane." translation="Crea una extrusión exclusiva en cada lado del plano del perfil."/>
	<label commandName="WholeLength" devLabel="Whole Length" translation="Longitud total"/>
	<label commandName="WholeLengthTooltip" devLabel="Extrudes half the specified distance to each side." translation="Extruye la mitad de la distancia especificada a cada lado."/>
	<label commandName="angleDistanceColumnTooltip" devLabel="Specify angle value." translation="Especifique el valor del ángulo."/>
	<label commandName="blockDrivenAspectTooltipCof" devLabel="%1% is configured as it is dependent on %2%." translation="%1% está configurado porque depende de %2%."/>
	<label commandName="boxLengthInput" devLabel="Length" translation="Longitud"/>
	<label commandName="boxWidthInput" devLabel="Width" translation="Anchura"/>
	<label commandName="chamferAddTCI" devLabel="Add" translation="Añadir"/>
	<label commandName="chamferAddTableTooltip" devLabel="Add selection set." translation="Añadir conjunto de selección."/>
	<label commandName="chamferAngleDistanceSelection" devLabel="Distance and Angle" translation="Distancia y ángulo"/>
	<label commandName="chamferAngleDistanceTooltip" devLabel="Bevels edges based on a single distance and an angle." translation="Bisela aristas basándose en una única distancia y un ángulo."/>
	<label commandName="chamferBlendSelection" devLabel="Blend" translation="Fusión"/>
	<label commandName="chamferBlendTooltip" devLabel="Blends beveled edges into adjacent faces." translation="Fusiona aristas biseladas en caras adyacentes."/>
	<label commandName="chamferCornerTypeSelection" devLabel="Corner Type" translation="Tipo de esquina"/>
	<label commandName="chamferCtrlMacModifyDistanceSelections" devLabel="Hold Command to modify selection" translation="Mantenga pulsada la tecla Comando para modificar la selección"/>
	<label commandName="chamferCtrlWinModifyDistanceSelections" devLabel="Hold Ctrl to modify selection" translation="Mantenga pulsada la tecla Ctrl para modificar la selección"/>
	<label commandName="chamferDMEdges" devLabel="Edges/Faces" translation="Aristas/caras"/>
	<label commandName="chamferDefaultCursorPrompt" devLabel="Select edges, faces, or features to chamfer" translation="Seleccionar aristas, caras u operaciones para el chaflán"/>
	<label commandName="chamferEdgesFacesSelectionCursorPrompt" devLabel="Select edges or faces to chamfer" translation="Seleccionar aristas o caras para el chaflán"/>
	<label commandName="chamferEqualDistanceColumnTooltip" devLabel="Distance value is equal." translation="El valor de distancia es igual."/>
	<label commandName="chamferEqualDistanceSelection" devLabel="Equal Distance" translation="Distancia igual"/>
	<label commandName="chamferEqualDistanceTooltip" devLabel="Bevels edges based on an equal distance to each side." translation="Bisela aristas basándose en una distancia igual a cada lado."/>
	<label commandName="chamferFlipSelection" devLabel="Flip" translation="Cambiar"/>
	<label commandName="chamferFlipTooltip" devLabel="Flips first and second sides of chamfer." translation="Cambia el primer y segundo lado del chaflán."/>
	<label commandName="chamferMiterSelection" devLabel="Miter" translation="Bisel"/>
	<label commandName="chamferMiterTooltip" devLabel="Merges beveled edges into a mitered corner point." translation="Fusiona aristas biseladas en un punto de esquina biselada."/>
	<label commandName="chamferPMEdges" devLabel="Edges/Faces/Features" translation="Aristas/caras/operaciones"/>
	<label commandName="chamferRemoveTCI" devLabel="Remove" translation="Quitar"/>
	<label commandName="chamferRemoveTableTooltip" devLabel="Remove selection set." translation="Elimine el conjunto de selección."/>
	<label commandName="chamferRowSelection" devLabel="Selection Set" translation="Conjunto de selección"/>
	<label commandName="chamferSelection" devLabel="Chamfer" translation="Chaflán"/>
	<label commandName="chamferSelectionTable" devLabel="SelectionChamferTable" translation="SelectionChamferTable"/>
	<label commandName="chamferSpecifyAngleDistance" devLabel="Specify chamfer distance and angle" translation="Especificar la distancia y el ángulo del chaflán"/>
	<label commandName="chamferSpecifyDistance" devLabel="Specify chamfer distance" translation="Especificar la distancia del chaflán"/>
	<label commandName="chamferSpecifyTwoDistance" devLabel="Specify chamfer distances" translation="Especificar las distancias del chaflán"/>
	<label commandName="chamferStringDMEdges" devLabel="Select edges or faces to create chamfers." translation="Seleccione las aristas o las caras para crear chaflanes."/>
	<label commandName="chamferStringPMEdges" devLabel="Select edges, faces, or features to create chamfers." translation="Seleccione las aristas, las caras o las operaciones para crear chaflanes."/>
	<label commandName="chamferTangentSelection" devLabel="Tangent Chain" translation="Cadena tangente"/>
	<label commandName="chamferTangentTooltip" devLabel="Automatically select tangent geometry." translation="Seleccione automáticamente la geometría de tangente."/>
	<label commandName="chamferTooltip" devLabel="Creates a chamfer to join beveled edges at the corner." translation="Crea un chaflán para unir aristas biseladas en la esquina."/>
	<label commandName="chamferTwoDistanceColumnTooltip" devLabel="Specify second distance value." translation="Especifique el segundo valor de distancia."/>
	<label commandName="chamferTwoDistanceSelection" devLabel="Two Distance" translation="Dos distancias"/>
	<label commandName="chamferTwoDistanceTooltip" devLabel="Bevels edges based on a different distance to each side." translation="Bisela aristas en función de una distancia diferente a cada lado."/>
	<label commandName="chamferTypeSelection" devLabel="Type" translation="Tipo"/>
	<label commandName="cutCheckBoxes" devLabel="Check Boxes for Participants" translation="Casillas de verificación para participantes"/>
	<label commandName="cutParticipantTable" devLabel="Cut Participant Table" translation="Cortar tabla de participantes"/>
	<label commandName="cutTableGroup" devLabel="Objects To Cut" translation="Objetos para cortar"/>
	<label commandName="cylinderDiameterInput" devLabel="Diameter" translation="Diámetro"/>
	<label commandName="dConfigConfigureTab" devLabel="Configure" translation="Configurar"/>
	<label commandName="dConfigFeatureTab" devLabel="Feature" translation="Operación"/>
	<label commandName="dConfigTabBar" devLabel="Design Configure Tabbar" translation="Barra de fichas de configuración de diseño"/>
	<label commandName="disOneInput" devLabel="Distance 1" translation="Distancia 1"/>
	<label commandName="disTwoInput" devLabel="Distance 2" translation="Distancia 2"/>
	<label commandName="distanceOneColumnSelection" devLabel="Specify distance value." translation="Especifique el valor de la distancia."/>
	<label commandName="infoChamferRowAngleIcon" devLabel="infoChamferAngleIcon%1%" translation="infoChamferAngleIcon%1%"/>
	<label commandName="infoChamferRowAngleInput" devLabel="infoChamferAngleInput%1%" translation="infoChamferAngleInput%1%"/>
	<label commandName="infoChamferRowDistanceOneIcon" devLabel="infoChamferDistanceOneIcon%1%" translation="infoChamferDistanceOneIcon%1%"/>
	<label commandName="infoChamferRowDistanceOneInput" devLabel="infoChamferDistanceOneInput%1%" translation="infoChamferDistanceOneInput%1%"/>
	<label commandName="infoChamferRowDistanceTwoIcon" devLabel="infoChamferDistanceTwoIcon%1%" translation="infoChamferDistanceTwoIcon%1%"/>
	<label commandName="infoChamferRowDistanceTwoInput" devLabel="infoChamferDistanceTwoInput%1%" translation="infoChamferDistanceTwoInput%1%"/>
	<label commandName="infoChamferRowLabel" devLabel="infoChamferTableRowLabel%1%" translation="infoChamferTableRowLabel%1%"/>
	<label commandName="lclShellTangentChainToolTip" devLabel="Automatically select tangent geometry" translation="Seleccionar automáticamente la geometría tangente"/>
	<label commandName="lczlExpression" devLabel="Expression: " translation="Expresión: "/>
	<label commandName="lczlParameterName" devLabel="Parameter: " translation="Parámetro: "/>
	<label commandName="lczlValue" devLabel="Value: " translation="Valor: "/>
	<label commandName="primitiveHeightInput" devLabel="Height" translation="Altura"/>
	<label commandName="profileStartFromObjectSelectInfo" devLabel="Object" translation="Objeto"/>
	<label commandName="profileStartFromObjectSelectInfoDesc" devLabel="Select a face or plane to start extrusion from." translation="Seleccione una cara o un plano desde el que iniciar la extrusión."/>
	<label commandName="profileStartOffsetDesc" devLabel="Specify distance to offset extrusion from profile plane." translation="Especifique la distancia de desfase de la extrusión desde el plano del perfil."/>
	<label commandName="profileStartOffsetoffset" devLabel="Offset" translation="Desfase"/>
	<label commandName="toObjectSelectInfo" devLabel="Object" translation="Objeto"/>
	<label commandName="toObjectSelectInfoDesc" devLabel="Select a body, face, or construction object to extrude to." translation="Seleccione un cuerpo, una cara o un objeto de construcción para extruir."/>
</Resource>