<?xml version='1.0' encoding='utf-8'?>
<Resource>
	<label commandName="2bendIntersection" devLabel="2-Bend Intersection" translation="" />
	<label commandName="3bendIntersection" devLabel="3-Bend Intersection" translation="" />
	<label commandName="ADSKFeatRule1" devLabel="ABS (1.5mm)" translation="" />
	<label commandName="ADSKFeatRule2" devLabel="Nylon (PA6) (2.5mm)" translation="" />
	<label commandName="ADSKFeatRule3" devLabel="Polypropylene (PP) (3 mm)" translation="" />
	<label commandName="ADSKFeatRule4" devLabel="ABS (0.1 in)" translation="" />
	<label commandName="ADSKFeatRule5" devLabel="Nylon (PA6) (0.1 in)" translation="" />
	<label commandName="ADSKFeatRule6" devLabel="Polypropylene (PP) (0.1 in)" translation="" />
	<label commandName="ADSKRule1" devLabel="Steel (mm)" translation="" />
	<label commandName="ADSKRule2" devLabel="Stainless Steel (mm)" translation="" />
	<label commandName="ADSKRule3" devLabel="Aluminum (mm)" translation="" />
	<label commandName="ADSKRule4" devLabel="Steel (in)" translation="" />
	<label commandName="ADSKRule5" devLabel="Stainless Steel (in)" translation="" />
	<label commandName="ADSKRule6" devLabel="Aluminum (in)" translation="" />
	<label commandName="AGDFeatureForm" devLabel="Organic" translation="" />
	<label commandName="ALL_TOOL_BODY_REFERENCE_LOST" devLabel="All tool bodies are lost, try editing this feature to reselect tool bodies." translation="" />
	<label commandName="ANNOTATION_RESTRUCTURED" devLabel="Some PMI has been changed due to Bodies changing structure." translation="" />
	<label commandName="APIFeature" devLabel="APIFeature" translation="" />
	<label commandName="API_COMPUTE_ERROR" devLabel="Cannot compute this feature." translation="" />
	<label commandName="API_COMPUTE_WARNING" devLabel="This feature computed with warnings." translation="" />
	<label commandName="API_DEFINITION_MISSING" devLabel="The extension that owns this feature is not running." translation="" />
	<label commandName="API_ERROR_PARALLEL" devLabel="This feature does not support parallel compute." translation="" />
	<label commandName="ARRANGE_2D_INVALID_SEPARATION" devLabel="The spacing must be less than twice the width." translation="" />
	<label commandName="ARRANGE_2D_NO_GEOMETRY" devLabel="Component does not have a body or sketch, which is required for 2D arrangement." translation="" />
	<label commandName="ARRANGE_2D_NO_SHAPES" devLabel="Nothing has been selected to arrange." translation="" />
	<label commandName="ARRANGE_3D_BODY_INVALIDMESH" devLabel="Can't get valid mesh body from the component." translation="" />
	<label commandName="ARRANGE_3D_BODY_MISSING" devLabel="Component does not have a body, which is required for 3D arrangement." translation="" />
	<label commandName="ARRANGE_ERROR_ENVELOPEBODYFACE" devLabel="2D arrangement using a body requires that a face be selected." translation="" />
	<label commandName="ARRANGE_ERROR_ENVELOPELENWIDTH" devLabel="2D arrangement using a work plane as the envelope requires the length and width to also be set." translation="" />
	<label commandName="ARRANGE_ERROR_ENVELOPETYPEINVALID" devLabel="2D arrangement requires the envelope to be a face, work plane, or sketch." translation="" />
	<label commandName="ARRANGE_ERROR_ENVELOPE_INVALIDRECTANGULAR" devLabel="The envelope geometry has been modified such that it is no longer rectangular.The envelope must have a rectangular shape.Modify the existing envelope or select a new one." translation="" />
	<label commandName="ARRANGE_ERROR_ENVLOPE3DBODY" devLabel="3D arrangement requires a body to be selected for the envelope." translation="" />
	<label commandName="ARRANGE_ERROR_INVALID_GEOMETRY" devLabel="These items could not be arranged due to geometry issues. Try checking all components and their geometry to make sure they are suitable for arranging; arrangeable items should have flat patterns and closed contours." translation="" />
	<label commandName="ARRANGE_ERROR_MISSING_BODY" devLabel="Missing body: cannot arrange these items. Try editing this feature to fix the problem." translation="" />
	<label commandName="ARRANGE_ERROR_MISSING_COMP" devLabel="Missing component: cannot arrange these items. Try editing this feature to fix the problem." translation="" />
	<label commandName="ARRANGE_ERROR_MISSING_FACE" devLabel="Missing planar face: cannot arrange these items. Try editing this feature to fix the problem." translation="" />
	<label commandName="ARRANGE_ERROR_MISSING_SKETCH" devLabel="Missing sketch: cannot arrange these items. Try editing this feature to fix the problem." translation="" />
	<label commandName="ARRANGE_ERROR_NOENVELOPE" devLabel="No envelope geometry defined." translation="" />
	<label commandName="ARRANGE_ERROR_NOT_ARRANGED" devLabel="Could not arrange these items." translation="" />
	<label commandName="ARRANGE_ERROR_NOT_CLOSED" devLabel="At least one shape can't be arranged because its outer contour is not closed." translation="" />
	<label commandName="ARRANGE_ERROR_NOT_COMPLETE" devLabel="Arrangement could not be completed." translation="" />
	<label commandName="ARRANGE_ERROR_NOT_FIT" devLabel="There is not enough room to arrange all selected items. Edit this feature and try enlarging the area where they will be arranged." translation="" />
	<label commandName="ARRANGE_ERROR_NO_POSITIVE_QUANTITY" devLabel="There are no components to arrange because the quantity of all components is set to 0. Increase the quantity of a component to begin the arrangement." translation="" />
	<label commandName="ARRANGE_ERROR_NO_ROOM" devLabel="There is not enough room to arrange all selected items. Edit this feature and try selecting fewer items or enlarging the area where they will be arranged." translation="" />
	<label commandName="ARRANGE_ERROR_UNSUPPORTEDDIMENSION" devLabel="Algorithm does not support the requested arrangement dimension." translation="" />
	<label commandName="ARRANGE_ITEM_GROUNDED" devLabel="Pinned component cannot be arranged." translation="" />
	<label commandName="ARRANGE_ITEM_OVERFILLED" devLabel="The component could not be included in the Arrange, &#10;as the envelope size was not sufficient to fit it. " translation="" />
	<label commandName="ARRANGE_ITEM_OVERFLOW" devLabel="Component did not fit in the envelope." translation="" />
	<label commandName="ARRANGE_ITEM_QTY_0" devLabel="The component is not included in the Arrange, &#10;as the quantity of it is set to 0. " translation="" />
	<label commandName="ARRANGE_ITEM_QTY_REMAIN" devLabel="Some components are not included in the arrangement because the envelope is full, resulting in a partial arrangement. " translation="" />
	<label commandName="ARRANGE_ITEM_XREFSUBCOMPONENT" devLabel="Referenced component cannot be copied without its parent." translation="" />
	<label commandName="ARRANGE_NOT_LEAF_COMPONENTS" devLabel="Some items cannot be arranged because they have child components. This is either because the design has been modified,&#09;&#09;&#09;&#09;&#09;&#09;&#09;&#09;&#09;&#09;&#09;&#09;&#09;&#09;&#09;&#09; or was made with an older version of Fusion. Try re-selecting only leaf components for arrangement. (A leaf has no child components.)" translation="" />
	<label commandName="ARRANGE_WARN_ENVELOPEMISSING" devLabel="One or more envelopes can no longer be used. This could be because the envelope geometry was changed in a way that makes it no longer recognizable. In the Arrange dialog, reselect the envelopes to arrange components on them." translation="" />
	<label commandName="ARRANGE_WARN_NOREGULARPART" devLabel="Some filler components with a specific material cannot be arranged because there is no available envelope for that material.&#10;&#10;You can specify these filler components as non-filler, which would allow them to be arranged in an envelope of their own.&#10;&#10;Alternatively, you can include other components that have the same material assigned to them in an envelope. The filler components can then be arranged in that envelope if there is leftover space." translation="" />
	<label commandName="ARRANGE_WARN_SHAPESMISSING" devLabel="One or more components cannot be arranged. This could be because the components were changed in a way that makes them no longer recognizable. In the Arrange dialog, reselect the components to include them in the arrangement." translation="" />
	<label commandName="ASSET_LOAD_FAILED" devLabel="Failed to load asset for " translation="" />
	<label commandName="AXIS_LOST" devLabel="The axis is lost, try editing this feature to reselect the axis." translation="" />
	<label commandName="AbortedOnCancellationErrorMessage" devLabel="Your request to delete the feature(s) from the timeline has been cancelled." translation="" />
	<label commandName="AccessPermissionError" devLabel="Access not allowed, the library may be private. Contact the file owner to request access." translation="" />
	<label commandName="AccessibilityAnalysisDefaultUserName" devLabel="Accessibility" translation="" />
	<label commandName="ActivateGenerativeModel" devLabel="Activate Generative Model" translation="" />
	<label commandName="ActivateModel" devLabel="Activate Model" translation="" />
	<label commandName="ActivateSimulationModel" devLabel="Activate Simulation Model" translation="" />
	<label commandName="Add Length" devLabel="Add Length" translation="" />
	<label commandName="Add Size" devLabel="Add Size" translation="" />
	<label commandName="AddPlannarFaceEdgeVertices" devLabel="Could not determine the symmetry from the selections. Do both sides have the same number of faces?" translation="" />
	<label commandName="AddPlannarFaces" devLabel="Could not determine the symmetry from the selections. Continue selecting edges and vertices, master side followed by mirror side." translation="" />
	<label commandName="AddSymmetryFailed" devLabel="Failed to add symmetry" translation="" />
	<label commandName="AddSymmetryFailedEntitiesSameSurface" devLabel="All selected entities should be on the same surface." translation="" />
	<label commandName="AddSymmetryFailedFaceEdge" devLabel="Face Edge Vertex selection is not consistent." translation="" />
	<label commandName="AddSymmetryFailedSameSurface" devLabel="Both faces should be on the same surface." translation="" />
	<label commandName="AlignGeometryNotFound" devLabel="The referenced geometry for Align cannot be found." translation="" />
	<label commandName="AlignSolveFailed" devLabel="Align Feature solve failed." translation="" />
	<label commandName="AnalysisUpdateWarning" devLabel="Selected objects are missing, or are not available at this point in your Timeline" translation="" />
	<label commandName="Angle1" devLabel="Angle 1" translation="" />
	<label commandName="Angle2" devLabel="Angle 2" translation="" />
	<label commandName="AngularityTooltip" devLabel="Angularity" translation="" />
	<label commandName="Animation" devLabel="Animation workspace" translation="" />
	<label commandName="AnnihilatedSketchDimension" devLabel="This dimension value causes the dimensioned geometry to be destroyed. The original dimension will be restored." translation="" />
	<label commandName="AnnotationsBrowserLabel" devLabel="PMI" translation="" />
	<label commandName="AnnotationsBrowserTooltip" devLabel="Product Manufacturing Information (PMI)" translation="" />
	<label commandName="AnsiMetricMProfile" devLabel="ANSI Metric M Profile" translation="" />
	<label commandName="AnsiUnifiedScrewThreads" devLabel="ANSI Unified Screw Threads" translation="" />
	<label commandName="AnyCADWMCloneFeatureName" devLabel="Component Link %1% v%2%" translation="" />
	<label commandName="AppearanceCIStr" devLabel="AppearanceCI" translation="" />
	<label commandName="AppearanceInheritToolTip_1" devLabel="Inherits the Appearance from the Physical Material assigned to this object.&#10;&#10;If the Physical Material changes, this Appearance updates to match." translation="" />
	<label commandName="AppearanceInheritToolTip_2" devLabel="Inherits the Appearance override from the parent component that contains this object.&#10;&#10;If the Appearance of the parent component changes, this Appearance updates to match." translation="" />
	<label commandName="AppearanceRootToolTip" devLabel="Current default Appearance override for &#10;" translation="" />
	<label commandName="AppearanceRule" devLabel="Appearance Rule 1" translation="" />
	<label commandName="AppearanceStr" devLabel="Appearance" translation="" />
	<label commandName="AppendFaceFailed" devLabel="Append Face failed" translation="" />
	<label commandName="Arc Weld" devLabel="Arc Weld" translation="" />
	<label commandName="ArrangeEnvelopeComponentBaseName" devLabel="Envelope" translation="" />
	<label commandName="ArrangeEnvelopeInstanceQuantity" devLabel="Qty" translation="" />
	<label commandName="ArrangeEnvelopeQuantity" devLabel="Qty" translation="" />
	<label commandName="ArrangeFeatureSelectionId" devLabel="Arrange Feature" translation="" />
	<label commandName="ArrangeFeatureSelectionIds" devLabel="Arrange Features" translation="" />
	<label commandName="ArrangeRequest.AlgId" devLabel="The given algorithm ID is invalid." translation="" />
	<label commandName="ArrangementsSelectionId" devLabel="Arrangements" translation="" />
	<label commandName="AssemblyFeatureRule" devLabel="Assembly Feature Rule 1" translation="" />
	<label commandName="AssetAdapterIsMissing" devLabel="Asset adapter is missing" translation="" />
	<label commandName="AutoBoltInHoleIncompatibleThreadSizeIssue" devLabel="Automatically selected bolt size doesn't match the hole thread size." translation="" />
	<label commandName="AutoBoltInHoleIncompatibleThreadSizeIssueHint" devLabel="Edit the bolt, then select the hole threaded face to update the bolt size." translation="" />
	<label commandName="AutomatedModelingOrganicBodyName" devLabel="Body%1%" translation="" />
	<label commandName="AxisGeometryMissing" devLabel="Axis geometry is missing" translation="" />
	<label commandName="BAD_JOINT_DOF" devLabel="Motion Link joint DOF is wrong type" translation="" />
	<label commandName="BCNoTargetComponent" devLabel="No target component." translation="" />
	<label commandName="BCRequestError" devLabel="Error while creating fasteners." translation="" />
	<label commandName="BCRequestError1" devLabel="Error While trying to place countersink Bolt. Please make sure all countersink dats is set correctly." translation="" />
	<label commandName="BCRequestError2" devLabel="Error while initializing the template documents." translation="" />
	<label commandName="BCRequestError3" devLabel="Error While replacing Fasteners." translation="" />
	<label commandName="BCRequestError4" devLabel="Error while creating mates between fasteners." translation="" />
	<label commandName="BEND_GENERIC_FEATURE_FAILURE" devLabel="Can't bend the part with current parameters. Check bend angle and position in Bend dialog. Adjust values in the Sheet Metal rule. Make sure the body has uniform thickness and a flat, wide area is picked as stationary side." translation="" />
	<label commandName="BEND_INSUFFICIENT_REMNANT_ERROR" devLabel="Bend relief cannot be created for the given width and minimum remnant values. Verify inputs." translation="" />
	<label commandName="BEND_INVALID_ANGLE" devLabel="Bend angle must be non zero, greater than -180 and less than 180 degree." translation="" />
	<label commandName="BEND_INVALID_ANGLE_LEGACY" devLabel="Bend angle must be greater than 0 and less than 180 degree." translation="" />
	<label commandName="BEND_INVALID_BEND_LINE" devLabel="Bend line is no longer valid. Pick another bend line or edit sketch and verify line position." translation="" />
	<label commandName="BEND_INVALID_K_FACTOR" devLabel="Sheet metal K factor value must be between 0 and 1." translation="" />
	<label commandName="BEND_INVALID_RADIUS" devLabel="Bend radius is too small, try increasing the value." translation="" />
	<label commandName="BEND_INVALID_SHEET_METAL_BODY" devLabel="Not a valid sheet metal body." translation="" />
	<label commandName="BEND_INVALID_STATIONARY_FACE" devLabel="Not a valid sheet metal face." translation="" />
	<label commandName="BEND_LINE_OUTSIDE_FACE_ERROR" devLabel="Bend line must lie on the face to bend." translation="" />
	<label commandName="BEND_LOST_STATIONARY_FACE" devLabel="Stationary side is lost. Most likely due to a geometry change. This will require reselecting stationary face and all bend lines." translation="" />
	<label commandName="BEND_RELIEF_BODY_FAILURE" devLabel="Can't create Bend Relief. Adjust bend radius and rule values like relief type and size." translation="" />
	<label commandName="BEND_RELIEF_WIRE_FAILURE" devLabel="Can't create Bend Relief. Adjust bend radius and rule values like relief type and size" translation="" />
	<label commandName="BEND_UNEXPECTED_SPLIT_DETECTED" devLabel="Can't successfully create new geometry. Most likely caused by multiple bends interfering each other. Also make sure body thickness is even in all areas." translation="" />
	<label commandName="BEND_WARNING_SELF_INTERSECTING_BODY" devLabel="Body is self intersecting for the given inputs for bend." translation="" />
	<label commandName="BODY_REFERENCE_LOST" devLabel="The body reference is lost and this feature is using cached geometry.&#10;Edit this feature and select new body references." translation="" />
	<label commandName="BODY_SKETCH_NOT_INTERSECT" devLabel="The body and sketch plane do not intersect, please modify the body or redefine sketch!" translation="" />
	<label commandName="BOSS_GEOMETRY_UNEXPECTED" devLabel="Boss feature inputs result in unexpected geometry. Please inspect feature inputs." translation="" />
	<label commandName="BOSS_GEOM_SPLIT_BODY_ERR" devLabel="Cannot create boss feature because it would split one or more selected bodies into multiple bodies.&#10;Adjust the boss settings so that that the feature will not split existing bodies." translation="" />
	<label commandName="BOSS_HOLE_FILLET_FAILED" devLabel="Cannot create fillet for the hole in the boss feature.&#10;Decrease the Fillet Radius values associated with the hole." translation="" />
	<label commandName="BOSS_HOLE_PROFILE_FAILED" devLabel="Failed to build boss hole profile. Please inspect hole inputs." translation="" />
	<label commandName="BOSS_INVALID_PARAMETER_VALUE" devLabel="Cannot create boss feature with a diameter value that is negative or equal to 0.&#10;Adjust the Boss Diameter to a positive value." translation="" />
	<label commandName="BOSS_PROFILE_FAILED" devLabel="Failed to build boss profile. Please inspect inputs." translation="" />
	<label commandName="BOSS_RIB_DRAFT_FAILED" devLabel="Failed to build boss rib draft. Please inspect rib inputs." translation="" />
	<label commandName="BOSS_RIB_FILLET_FAILED" devLabel="Cannot compute blend faces on boss ribs.&#10;Decrease the Fillet Radius values associated with the rib." translation="" />
	<label commandName="BOSS_RIB_PROFILE_FAILED" devLabel="Failed to build boss rib. Please inspect rib inputs." translation="" />
	<label commandName="BOSS_ROOT_FILLET_FAILED" devLabel="Cannot create base fillet for the boss feature.&#10;Decrease the Base Fillet Radius value." translation="" />
	<label commandName="BOX_CREATE_BLOCK_FAILED" devLabel="Failed to create box solid body." translation="" />
	<label commandName="BOX_HEIGHT_VALUE_INVALID" devLabel="The box height is invalid." translation="" />
	<label commandName="BOX_LENGTH_VALUE_INVALID" devLabel="The box length is invalid." translation="" />
	<label commandName="BOX_WIDTH_VALUE_INVALID" devLabel="The box width is invalid." translation="" />
	<label commandName="BadGuideRail" devLabel="There is a problem with the guide rail. Check that it pierces the profile plane and that it is on the same side of the profile plane as the path." translation="" />
	<label commandName="BadSweepPath" devLabel="There is a problem with the sweep path. Check that it pierces the profile plane." translation="" />
	<label commandName="BaseFeature" devLabel="Base Feature" translation="" />
	<label commandName="BaseFeatureObstacles" devLabel="Obstacles" translation="" />
	<label commandName="BaseFeaturePreserves" devLabel="Preserves" translation="" />
	<label commandName="BaseFlange" devLabel="No target component." translation="" />
	<label commandName="BaseMeshBodySelectionCategory" devLabel="Mesh Bodies" translation="" />
	<label commandName="BaseMeshFaceGroupSelectionCategory" devLabel="Mesh Facegroups" translation="" />
	<label commandName="BaseMeshSelectionsId" devLabel="Mesh Bodies" translation="" />
	<label commandName="BeginEIPBlockedDueToConfiguration" devLabel="&lt;b&gt;Edit In Place (unavailable)&lt;/b&gt;&lt;p&gt;&lt;small&gt;Unavailable for Configured Components.&#10; Right-click &gt; Open to edit this Configuration directly&#10; from the Configured Design.&lt;/small&gt;" translation="" />
	<label commandName="BeginEIPBlockedDueToConfigurationParent" devLabel="&lt;b&gt;Edit In Place (unavailable)&lt;/b&gt;&lt;p&gt;&lt;small&gt;Parent component is a Configured Components.&#10; Right-click &gt; Open to edit this design directly, or open its&#10; parent to edit it in the context of the Configured Design.&lt;/small&gt;" translation="" />
	<label commandName="BeginEIPBlockedDueToOfflineGated" devLabel="Edit in Place is unavailable for a versioned component in offline mode" translation="" />
	<label commandName="BeginEIPBlockedDueToOfflineGatedParent" devLabel="Edit In Place is unavailable in offline mode because a parent component has a version." translation="" />
	<label commandName="BeginEIPBlockedDueToPermissions" devLabel="Edit In Place unavailable&#10;You do not have permission to edit this design." translation="" />
	<label commandName="BendLine" devLabel="Bend Line %1%" translation="" />
	<label commandName="BendLinesGroupName" devLabel="Bend Lines" translation="" />
	<label commandName="BendLinesGroupSelectionId" devLabel="BendLinesGroup" translation="" />
	<label commandName="BendRadiusConfig" devLabel="Bend Radius" translation="" />
	<label commandName="BendReliefRemnantConfig" devLabel="Relief Remnant" translation="" />
	<label commandName="BetweenRipErrorNoPoints" devLabel="Two valid points not provided for between points rip." translation="" />
	<label commandName="BevelEdgeFailed" devLabel="Cannot bevel selected edge. Select a different edge to bevel." translation="" />
	<label commandName="BoardConsumedByHole" devLabel="Entire board is cut by the hole" translation="" />
	<label commandName="BoardOutlineMissingNew" devLabel="The board outline is missing. Draw a closed board outline either in 2D PCB or by editing the sketch, then push to 3D PCB." translation="" />
	<label commandName="BoardProfileBuildFailureNew" devLabel="The board outline is open. Draw a closed board outline either in 2D PCB or by editing the sketch, then push to 3D PCB." translation="" />
	<label commandName="BoardProfileMissing" devLabel="No profile is selected for board edit." translation="" />
	<label commandName="BoardSketchEliminatedNew" devLabel="The Timeline history is rolled back. Drag the Timeline marker forward (right) to the end of the history record." translation="" />
	<label commandName="BodySelectionCategory" devLabel="Bodies" translation="" />
	<label commandName="BoltInHoleIncompatibleThreadSizeIssue" devLabel="Bolt size doesn't match the hole thread size." translation="" />
	<label commandName="BoltInHoleIncompatibleThreadSizeIssueHint" devLabel="Edit the bolt, then select the hole matching bolt size." translation="" />
	<label commandName="BoltIsMissingNutOrCounterpart" devLabel="The bolt is missing a nut or an engaged component." translation="" />
	<label commandName="BoltIsToLongError" devLabel="The bolt is too long." translation="" />
	<label commandName="BoltIsToShortError" devLabel="The bolt is too short." translation="" />
	<label commandName="BossFeatureName" devLabel="Boss" translation="" />
	<label commandName="BossItemFacade1" devLabel="Unexpected Error - missing some information." translation="" />
	<label commandName="BossItemFacade2" devLabel="Error while creating Fasteners - &lt;b&gt;%1%&lt;/b&gt;." translation="" />
	<label commandName="BossItemFacade3" devLabel="Error while creating Fasteners folder, which are necessary for Fasteners parts." translation="" />
	<label commandName="BrOutdatedLibraryItemDesc" devLabel="Click the Update icon, or right-click and select Edit Fastener to select a new fastener." translation="" />
	<label commandName="BrOutdatedLibraryItemTip" devLabel="The fastener no longer fits due to recent changes to the target geometry." translation="" />
	<label commandName="BrOutdatedLibraryItemsDesc" devLabel="Locate the fastener, and click the Update icon to open a dialog to select a new fastener." translation="" />
	<label commandName="BrOutdatedLibraryItemsTip" devLabel="One of the fasteners in the folder no longer fits due to recent changes to the target geometry." translation="" />
	<label commandName="BreakLinkCloneError" devLabel="Break Link command failed for some reason, probably it would have created cyclic references." translation="" />
	<label commandName="BreakLinkDeriveVersionClash" devLabel="The Target Design currently references a different version of the Source Design &lt;b&gt;%1%&lt;/b&gt;.A Target design can have multiple references to a Source design only if they are the same version.The referencing designs must be updated to reference the same version of the target design before this operation can be conducted." translation="" />
	<label commandName="BrowserArrangementsLabel" devLabel="Arrangements" translation="" />
	<label commandName="BrowserVisibilityTooltip" devLabel="Check to configure Visibility for this&#10;object." translation="" />
	<label commandName="BuildEdgeCurvesFailed" devLabel="build Edge Curves failed" translation="" />
	<label commandName="BuildSurfacesFailed" devLabel="build Surfaces failed" translation="" />
	<label commandName="C2SM_Feature_Compute_Warning" devLabel="Compute Warning" translation="" />
	<label commandName="CANNOT_CHAMFER_FREE_EDGE" devLabel="Cannot create chamfer feature from selected edges. Select edges with two adjacent faces." translation="" />
	<label commandName="CANNOT_DEFINE_CSYS" devLabel="Cannot define coordinate system" translation="" />
	<label commandName="CANNOT_DELETE_CACHED_INSTANCE" devLabel="Cannot delete the instance not present in pattern" translation="" />
	<label commandName="CANNOT_DELETE_DEAD_INSTANCE" devLabel="Cannot delete instance already deleted" translation="" />
	<label commandName="CANNOT_DERIVE_INSERTED_DOC" devLabel="The source design &lt;b&gt;%1%&lt;/b&gt; is inserted into &lt;b&gt;%2%&lt;/b&gt;. Deriving from an inserted design is not supported." translation="" />
	<label commandName="CANNOT_DERIVE_SAME_ASSET" devLabel="The source design asset cannot be selected as the target asset for Derive." translation="" />
	<label commandName="CANNOT_DERIVE_SAME_DOC" devLabel="The source design cannot be selected as the target for Derive." translation="" />
	<label commandName="CANNOT_DERIVE_SAME_NESTED_DOC" devLabel="The selected Target Design creates a cyclical dependency with the Source Design. Break the link in the Source Design or select a different Target Design." translation="" />
	<label commandName="CANNOT_FILLET_FREE_EDGE" devLabel="Some edges can not be filleted due to they changed to free edges." translation="" />
	<label commandName="CANNOT_MOVE_GROUNDED_OCC" devLabel="Capture Position cannot move pinned Component occurrence." translation="" />
	<label commandName="CBDIA_MISSING" devLabel="Counterbore Diameter property missing." translation="" />
	<label commandName="CBDIA_PROPERTY_MISMATCH" devLabel="The Counterbore Diameter property is not valid. Please update the text or the Counterbore Diameter." translation="" />
	<label commandName="CBDIA_TOLERANCE_INVALID" devLabel="Invalid Counterbore Diameter tolerances." translation="" />
	<label commandName="CBDIA_ZERO" devLabel="Counterbore diameter is present but zero." translation="" />
	<label commandName="CBDPT_PROPERTY_MISMATCH" devLabel="The Counterbore Depth property is not valid. Please update the text or the Counterbore Depth." translation="" />
	<label commandName="CBDPT_TOLERANCE_INVALID" devLabel="Invalid Counterbore Depth tolerances." translation="" />
	<label commandName="CBDPT_ZERO" devLabel="Counterbore depth is present but zero." translation="" />
	<label commandName="CBDepth" devLabel="Counterbore Depth" translation="" />
	<label commandName="CBDiameter" devLabel="Counterbore Diameter" translation="" />
	<label commandName="CBRAD_PROPERTY_MISMATCH" devLabel="The Counterbore Radius property is not valid. Please update the text or the Counterbore Radius." translation="" />
	<label commandName="CBRAD_ZERO" devLabel="Counterbore radius is present but zero." translation="" />
	<label commandName="CDNotCached" devLabel="Configured Design not available offline" translation="" />
	<label commandName="CDNotDetermined" devLabel="Configured Design could not be determined" translation="" />
	<label commandName="CDVersionNotCached" devLabel="Configured Design version not available offline" translation="" />
	<label commandName="CDVersionNotDetermined" devLabel="Configured Design version could not be determined" translation="" />
	<label commandName="CFLANGE_CLOSE_LOOP" devLabel="Sketch curve with closed loop is not allowed" translation="" />
	<label commandName="CFLANGE_CURVE_NOT_TANGENT" devLabel="Selected Sketch curve is not tangent." translation="" />
	<label commandName="CFLANGE_CURVE_RADIUS_TOO_SMALL" devLabel="Sketch curve radius is too small." translation="" />
	<label commandName="CFLANGE_INVALID_CURVE_FOR_MULTIEDGE_CFJOIN" devLabel="Could not create multi-edge contour flange. The selected sketch must start on one of the selected edges to create contour flanges on multiple edges. Try editing the sketch to make it start on a selected edge." translation="" />
	<label commandName="CFLANGE_INVALID_GEOM" devLabel="Invalid input sketch curve." translation="" />
	<label commandName="CHAMFER_BRANCHING_CHAIN_ERROR" devLabel="Cannot maintain first distance for all edges in selection set. Move branching edges to a separate selection set or adjust Type to Equal Distance." translation="" />
	<label commandName="CHAMFER_GENERIC_FEATURE_FAILURE" devLabel="Cannot create chamfer feature. Adjust chamfer type, edges, faces, features, distance, angle, or corner type options." translation="" />
	<label commandName="CHAMFER_INVALID_DISTANCE" devLabel="Chamfer distance value is invalid. Adjust distance." translation="" />
	<label commandName="CHAMFER_NO_EDGE_FOUND" devLabel="Cannot find edge to chamfer. Adjust edge, face, or feature selection." translation="" />
	<label commandName="CHANGE_SMRULE_FAIL" devLabel="Could not change the Sheet Metal Rule." translation="" />
	<label commandName="CIRCULAR_PATTERN_MISSING_AXIS" devLabel="Missing axis" translation="" />
	<label commandName="COIL_BUILD_COIL_FAILED" devLabel="Failed to build coil tool body." translation="" />
	<label commandName="COIL_BUILD_HELIX_FAILED" devLabel="Failed to build coil helix path." translation="" />
	<label commandName="COMPLEX_PATTERN_MISSING_TARGET" devLabel="Missing target face. Try editing this feature to fix the problem." translation="" />
	<label commandName="COMPUTE_TIME_CHAINING_CONFLICT" devLabel="Cannot compute Tangent Chain. Some geometry in the tangent chain is already selected in other selection set rows. Tangent Chain disabled. Adjust selection sets to enable Tangent Chain." translation="" />
	<label commandName="COMPUTE_TIME_CHAINING_CONFLICT_FEATURECOMPUTE" devLabel="Cannot compute Tangent Chain. Some geometry in the tangent chain is already selected in other selection set rows. Tangent Chain disabled. Edit the feature to adjust selection sets and reactivate Tangent Chain." translation="" />
	<label commandName="COMPUTE_TIME_CHAINING_ISSUE" devLabel="Cannot compute Tangent Chain. Some geometry in the tangent chain is already selected in other selection set rows. Adjust selection sets before enabling Tangent Chain." translation="" />
	<label commandName="CONFIGURATIONS_PIM_CALL_FAILED" devLabel="Failed to retrieve configuration data." translation="" />
	<label commandName="CONNECTOBSTACLE_NORMAL_ERROR" devLabel="Start and end selection normal is not parallel, please check inputs" translation="" />
	<label commandName="CONSTRAINT_GEOMETRY_MISSING" devLabel="Using cached geometry to constrain components" translation="" />
	<label commandName="CONVERT_TO_SM_ALREADY_SM_BODY" devLabel="Selected body is already a Sheet Metal body." translation="" />
	<label commandName="CONVERT_TO_SM_CANNOT_SHARE_RULES" devLabel="Using the same rule for more than one converted component can affect parametric computation of the design. Select another rule or use the Rules dialog to duplicate a rule, then try again." translation="" />
	<label commandName="CONVERT_TO_SM_COMPONENT_THICKNESS_MISMATCH" devLabel="Body thickness and Sheet Metal component rule thickness are different. Move body to a non-Sheet Metal component or change rule thickness to continue." translation="" />
	<label commandName="CONVERT_TO_SM_GENERIC_FAILURE" devLabel="Can't convert to Sheet Metal. Verify inputs like body type, thickness, or rule settings, then try again. Contact Autodesk Support if the issue persists." translation="" />
	<label commandName="CONVERT_TO_SM_INCORRECT_RULE_THICKNESS" devLabel="Body thickness does not match with rule thickness. Please modify the rule thickness or change rule." translation="" />
	<label commandName="CONVERT_TO_SM_INVALID_BASE_FACE" devLabel="Can't convert to Sheet Metal. Select the base face of a valid Sheet Metal body (typically a wide, flat area)." translation="" />
	<label commandName="CONVERT_TO_SM_INVALID_OPPOSITE_FACE" devLabel="Not a valid opposite face for convert to sheet metal." translation="" />
	<label commandName="CONVERT_TO_SM_NON_PARALLEL_FACES" devLabel="Can't calculate body thickness. Please make sure the input body is valid for sheet metal and has uniform thickness." translation="" />
	<label commandName="CONVERT_TO_SM_THICKNESS_FIND_FAILURE" devLabel="Can't calculate body thickness. Select the base face of a valid Sheet Metal body (typically a wide, flat area)." translation="" />
	<label commandName="CONVERT_TO_SM_UNSUPPORTED_BODY_TYPE" devLabel="Can't convert body type to Sheet Metal. Select a solid body instead." translation="" />
	<label commandName="CONVERT_TO_SM_UNSUPPORTED_THICKNESS_VALUE" devLabel="Body thickness value is not supported." translation="" />
	<label commandName="CONVERT_TO_SM_WARNING_RULE_THICKNESS_WILL_CHANGE" devLabel="Geometry changed. Need to recompute thickness. Right-click, select Edit Feature, and confirm thickness value is correct." translation="" />
	<label commandName="COPY_IMAGE_FILE_WARNING" devLabel="Failed to copy an image file. It is likely that the source file is missing. In the Design workspace, click Insert &gt; Canvas to reinsert the image." translation="" />
	<label commandName="CORNER_EDGE_REFERENCE_LOST" devLabel="The selected edge was altered, and some of the input geometry is missing.&#10;Edit Corner Closure and select new edges." translation="" />
	<label commandName="CORNER_INVALID_BEND_TYPE" devLabel="Cannot compute Corner Closure. Cannot determine if this is 2-Bend or 3-Bend corner." translation="" />
	<label commandName="CORNER_INVALID_EDGE_SELECTION" devLabel="Cannot compute Corner Closure. Edge selection is invalid." translation="" />
	<label commandName="CORNER_INVALID_MITER_GAP" devLabel="Cannot compute Corner Closure. Miter Gap value is invalid." translation="" />
	<label commandName="CORNER_INVALID_THREE_BEND_RELIEF_RADIUS" devLabel="Cannot compute Corner Closure. 3-Bend Relief Radius value is invalid." translation="" />
	<label commandName="CORNER_INVALID_TWO_BEND_RELIEF_PLACEMENT" devLabel="Cannot compute Corner Closure. 2-Bend Relief Placement value is invalid." translation="" />
	<label commandName="CORNER_INVALID_TWO_BEND_RELIEF_SIZE" devLabel="Cannot compute Corner Closure. 2-Bend Relief Size value is invalid." translation="" />
	<label commandName="CORNER_RELIEF_BODY_FAILURE" devLabel="Can't create corner relief. Adjust bend radius and rule values like relief type and size." translation="" />
	<label commandName="CORNER_RELIEF_WIRE_FAILURE" devLabel="Can't create corner relief. Adjust bend radius and rule values like relief type and size." translation="" />
	<label commandName="COSMETIC_TAPER_THREAD_TOOL_BODY_FAILED" devLabel="Failed to build taper thread tool body." translation="" />
	<label commandName="CPatternFeatureName" devLabel="C-Pattern" translation="" />
	<label commandName="CR3Intersection" devLabel="Intersection" translation="" />
	<label commandName="CR3RadiusSize" devLabel="Relief radius" translation="" />
	<label commandName="CRArcWeld" devLabel="Arc Weld" translation="" />
	<label commandName="CRFullRound" devLabel="Full Round" translation="" />
	<label commandName="CRLaserWeld" devLabel="Laser Weld" translation="" />
	<label commandName="CRLinearWeld" devLabel="Linear Weld" translation="" />
	<label commandName="CRNoReplacement" devLabel="No Replacement" translation="" />
	<label commandName="CRRoundWithRadius" devLabel="Round with Radius" translation="" />
	<label commandName="CRSquare" devLabel="Square" translation="" />
	<label commandName="CRTangent" devLabel="Tangent" translation="" />
	<label commandName="CRTrimToBend" devLabel="Trim to Bend" translation="" />
	<label commandName="CRVertex" devLabel="Vertex" translation="" />
	<label commandName="CSANG_PROPERTY_MISMATCH" devLabel="The Countersink Angle property is not valid. Please update the text or the Countersink Angle." translation="" />
	<label commandName="CSANG_ZERO" devLabel="Countersink angle is present but zero." translation="" />
	<label commandName="CSAngle" devLabel="Countersink Angle" translation="" />
	<label commandName="CSDIA_MISSING" devLabel="Countersink Angle property missing." translation="" />
	<label commandName="CSDIA_PROPERTY_MISMATCH" devLabel="The Countersink Diameter property is not valid. Please update the text or the Countersink Diameter." translation="" />
	<label commandName="CSDIA_TOLERANCE_INVALID" devLabel="Invalid Countersink Diameter tolerances." translation="" />
	<label commandName="CSDIA_ZERO" devLabel="Countersink diameter is present but zero." translation="" />
	<label commandName="CSDiameter" devLabel="Countersink Diameter" translation="" />
	<label commandName="CYLINDER_CREATE_CYLINDER_FAILED" devLabel="Failed to create cylinder solid body." translation="" />
	<label commandName="CYLINDER_DIAMETER_VALUE_INVALID" devLabel="The cylinder diameter is invalid." translation="" />
	<label commandName="CanNotToggleToDrivenDimension" devLabel="Cannot toggle dimension to Driven because it is referenced in the following upstream features:&#10;" translation="" />
	<label commandName="CanNotToggleToDrivenDimensionPost" devLabel="Edit upstream features and enter or select different dimension references, then you can change this dimension to Driven." translation="" />
	<label commandName="CannotConvertAssemblyWithComponentsError" devLabel="Cannot convert assembly with child components to part" translation="" />
	<label commandName="CannotConvertInOtherWorkspaceError" devLabel="Document type change is only permitted in the Design workspace." translation="" />
	<label commandName="CannotCreateDesignExperienceError" devLabel="Cannot create design experience" translation="" />
	<label commandName="CannotDeleteAppearanceHeader" devLabel="This appearance cannot be deleted because it is linked with an applied Physical Material: %s. To delete the appearance, first unassign and delete this material from the Physical Material command." translation="" />
	<label commandName="CannotDeleteAppearanceTitle" devLabel="Warning" translation="" />
	<label commandName="CantFindSuitableThread" devLabel="The selected face is %1% but the current thread family has no suitable type for %2% face." translation="" />
	<label commandName="CanvasBrowserLabel" devLabel="%1% is Unselectable.&lt;br&gt;Right-click &gt; Selectable to enable Selection" translation="" />
	<label commandName="CanvasDefaultUserName" devLabel="Canvas" translation="" />
	<label commandName="CanvasGroupDefaultName" devLabel="Canvas Group" translation="" />
	<label commandName="CanvasGroupSelectionId" devLabel="CanvasGroup" translation="" />
	<label commandName="CanvasSelectionCategory" devLabel="Canvas" translation="" />
	<label commandName="CanvasSelectionId" devLabel="Canvas" translation="" />
	<label commandName="CanvasSelectionPluralId" devLabel="Canvases" translation="" />
	<label commandName="CanvasesBrowserLabel" devLabel="Canvases" translation="" />
	<label commandName="CanvasesSelectionId" devLabel="Canvases" translation="" />
	<label commandName="CenterLineBody" devLabel="Center Lines" translation="" />
	<label commandName="CenterOfMassDefaultUserName" devLabel="CenterOfMass" translation="" />
	<label commandName="CenterOfMassSelectionId" devLabel="Center Of Mass" translation="" />
	<label commandName="CentreLineTooltip" devLabel="Center Line" translation="" />
	<label commandName="CfEdgeSelectionId" devLabel="Edge" translation="" />
	<label commandName="CfEdgesSelectionId" devLabel="Edges" translation="" />
	<label commandName="CfFacetSelectionId" devLabel="Face" translation="" />
	<label commandName="CfFacetsSelectionId" devLabel="Faces" translation="" />
	<label commandName="CfGripSelectionId" devLabel="Tangency Handle" translation="" />
	<label commandName="CfGripSelectionPluralId" devLabel="Tangency Handles" translation="" />
	<label commandName="CfVertexSelectionId" devLabel="Vertex" translation="" />
	<label commandName="CfVerticesSelectionId" devLabel="Vertices" translation="" />
	<label commandName="ChainUpdateFailure" devLabel="Failed to Get Latest version of one of the Component Instances of selected path" translation="" />
	<label commandName="ChainUpdateFailure_ccy" devLabel="Failed to Get Latest change to one of the component instances of selected path" translation="" />
	<label commandName="ChamferFeatureAngle" devLabel="Angle" translation="" />
	<label commandName="ChamferFeatureDistance" devLabel="Distance" translation="" />
	<label commandName="ChamferFeatureDistanceOne" devLabel="Distance 1" translation="" />
	<label commandName="ChamferFeatureDistanceTwo" devLabel="Distance 2" translation="" />
	<label commandName="ChamferFeatureName" devLabel="Chamfer" translation="" />
	<label commandName="ChangeAppliedByConfigurationRuleTitle" devLabel="Changes applied by configuration rule" translation="" />
	<label commandName="ChildTableRule" devLabel="Child Table Rule 1" translation="" />
	<label commandName="ChordToleranceConfigInfo" devLabel="Chord Tolerance" translation="" />
	<label commandName="CircleDiameter" devLabel="Inner Diameter" translation="" />
	<label commandName="CircularDependencyFound" devLabel="Circular dependency found!" translation="" />
	<label commandName="CircularDependencyFound2" devLabel="Circular dependency found: from %1% to %2%." translation="" />
	<label commandName="CircularPatternConfig" devLabel="Circular Pattern" translation="" />
	<label commandName="CircularRunoutTooltip" devLabel="Circular run-out" translation="" />
	<label commandName="CircularityTooltip" devLabel="Circularity" translation="" />
	<label commandName="CloudFileMissingRowId" devLabel="Configuration row identifier not found" translation="" />
	<label commandName="CloudFileNotConfiguration" devLabel="File is not a Configuration" translation="" />
	<label commandName="CmMKSUnitSystemName" devLabel="cm modeling length with MKS (m, kg, second, Celsius) units" translation="" />
	<label commandName="Coil" devLabel="No target component." translation="" />
	<label commandName="CoilDiameter" devLabel="Diameter" translation="" />
	<label commandName="CoilFeatureName" devLabel="Coil" translation="" />
	<label commandName="CoilHeight" devLabel="Height" translation="" />
	<label commandName="CoilPitch" devLabel="Pitch" translation="" />
	<label commandName="CoilRevolutions" devLabel="Revolutions" translation="" />
	<label commandName="CoilTaperAngle" devLabel="Angle" translation="" />
	<label commandName="ColumnRemoveFailed" devLabel="Column removal failed" translation="" />
	<label commandName="CompReplaceReqInstanceReadonly" devLabel="The selected component instance readonly." translation="" />
	<label commandName="CompReplaceReqOpenErr" devLabel="Replacement document could not be opened for reference." translation="" />
	<label commandName="ComponentConnectionAnalysisDefaultUserName" devLabel="Component Connection" translation="" />
	<label commandName="ComponentInsert" devLabel="Component Insert" translation="" />
	<label commandName="ComponentReplaceRequestUnexpectedAssetErr" devLabel="Replacement document is missing target component." translation="" />
	<label commandName="ComponentRule" devLabel="Component Rule 1" translation="" />
	<label commandName="ConcentricityTooltip" devLabel="Concentricity" translation="" />
	<label commandName="ConfigDirection" devLabel="Direction" translation="" />
	<label commandName="ConfigExportTypeCD" devLabel="Configured Design" translation="" />
	<label commandName="ConfigHoleFastenerFamily" devLabel="Standard" translation="" />
	<label commandName="ConfigHoleFastenerFit" devLabel="Fit" translation="" />
	<label commandName="ConfigHoleFastenerSize" devLabel="Size" translation="" />
	<label commandName="ConfigHoleFastenerType" devLabel="Fastener Type" translation="" />
	<label commandName="ConfigInsert" devLabel="Insert" translation="" />
	<label commandName="ConfigName" devLabel="Name" translation="" />
	<label commandName="ConfigProperty" devLabel="Property" translation="" />
	<label commandName="ConfigRulesMaximumValue" devLabel="maximum" translation="" />
	<label commandName="ConfigRulesMinimumValue" devLabel="minimum" translation="" />
	<label commandName="ConfigRulesStringActive" devLabel="Active" translation="" />
	<label commandName="ConfigRulesStringAspect" devLabel="Aspect" translation="" />
	<label commandName="ConfigRulesStringAssemblyFeature" devLabel="Assembly Feature" translation="" />
	<label commandName="ConfigRulesStringAssemblyFeatures" devLabel="Assembly Features" translation="" />
	<label commandName="ConfigRulesStringAssemblyFeaturesCategory" devLabel="Assembly Features Category" translation="" />
	<label commandName="ConfigRulesStringAssemblyFeaturesCategoryLongDescription" devLabel="Use the Getter block to reference configured assembly feature aspects in a logical condition. Use the Setter block to drive or limit configured assembly feature aspect values." translation="" />
	<label commandName="ConfigRulesStringAssemblyFeaturesCategoryShortDescription" devLabel="This toolbox category contains Getter and Setter blocks, pre-filled with data specific to configured assembly feature aspects like feature parameters, joint snaps, suppression, and visibility." translation="" />
	<label commandName="ConfigRulesStringBlockFromObject" devLabel="Block From Object" translation="" />
	<label commandName="ConfigRulesStringBlockFromObjectLongDescription" devLabel="Click an object to display the contextual toolbox, then click a Getter Block or Setter Block associated with that object to add it to the Rules Canvas." translation="" />
	<label commandName="ConfigRulesStringBlockFromObjectShortDescription" devLabel="Enters a mode that highlights objects in the browser, features in the timeline, and headers in the configuration table." translation="" />
	<label commandName="ConfigRulesStringBlockIsDisabled" devLabel="Block is disabled" translation="" />
	<label commandName="ConfigRulesStringBlockStatusDescriptionConstrain" devLabel="This aspect is also constrained by another block. Only the common values shared by both blocks will be included in the resulting list of valid values." translation="" />
	<label commandName="ConfigRulesStringBlockStatusDescriptionConstrainAllValuesError" devLabel="This block excludes all values from the list. You need to maintain at least one valid value." translation="" />
	<label commandName="ConfigRulesStringBlockStatusDescriptionConstrainError" devLabel="This aspect is already constrained by another block." translation="" />
	<label commandName="ConfigRulesStringBlockStatusDescriptionConstrainMaxError" devLabel="This aspect is already set to &lt;b&gt;{{initialValue}}&lt;/b&gt; by another block in rule: &lt;b&gt;{{ruleName}}&lt;/b&gt;. You can't set the maximum to a value below &lt;b&gt;{{initialValue}}&lt;/b&gt;." translation="" />
	<label commandName="ConfigRulesStringBlockStatusDescriptionConstrainMaxMaxError" devLabel="This aspect is already set to a maximum value of &lt;b&gt;{{initialValue}}&lt;/b&gt; by another block in rule: &lt;b&gt;{{ruleName}}&lt;/b&gt;. You can't set the maximum to a value above the existing maximum." translation="" />
	<label commandName="ConfigRulesStringBlockStatusDescriptionConstrainMaxMinError" devLabel="This aspect is already set to a maximum value of &lt;b&gt;{{initialValue}}&lt;/b&gt; by another block in rule: &lt;b&gt;{{ruleName}}&lt;/b&gt;. You can't set the minimum to a value above the existing maximum." translation="" />
	<label commandName="ConfigRulesStringBlockStatusDescriptionConstrainMaxRedefine" devLabel="This aspect is already set to a maximum value of &lt;b&gt;{{initialValue}}&lt;/b&gt; by another block in rule: &lt;b&gt;{{ruleName}}&lt;/b&gt;. This block redefines the maximum value to &lt;b&gt;{{requestedValue}}&lt;/b&gt;." translation="" />
	<label commandName="ConfigRulesStringBlockStatusDescriptionConstrainMaxValue" devLabel="This aspect is already set to &lt;b&gt;{{initialValue}}&lt;/b&gt; by another block in rule: &lt;b&gt;{{ruleName}}&lt;/b&gt;. You can set a maximum that includes &lt;b&gt;{{requestedValue}}&lt;/b&gt;, but the value will always be set to &lt;b&gt;{{initialValue}}&lt;/b&gt;." translation="" />
	<label commandName="ConfigRulesStringBlockStatusDescriptionConstrainMinError" devLabel="This aspect is already set to &lt;b&gt;{{initialValue}}&lt;/b&gt; by another block in rule: &lt;b&gt;{{ruleName}}&lt;/b&gt;. You can't set the minimum to a value above &lt;b&gt;{{initialValue}}&lt;/b&gt;." translation="" />
	<label commandName="ConfigRulesStringBlockStatusDescriptionConstrainMinMaxError" devLabel="This aspect is already set to a minimum value of &lt;b&gt;{{initialValue}}&lt;/b&gt; by another block in rule: &lt;b&gt;{{ruleName}}&lt;/b&gt;. You can't set the maximum to a value below the existing minimum." translation="" />
	<label commandName="ConfigRulesStringBlockStatusDescriptionConstrainMinMinError" devLabel="This aspect is already set to a minimum value of &lt;b&gt;{{initialValue}}&lt;/b&gt; by another block in rule: &lt;b&gt;{{ruleName}}&lt;/b&gt;. You can't set the minimum to a value below the existing minimum." translation="" />
	<label commandName="ConfigRulesStringBlockStatusDescriptionConstrainMinRedefine" devLabel="This aspect is already set to a minimum value of &lt;b&gt;{{initialValue}}&lt;/b&gt; by another block in rule: &lt;b&gt;{{ruleName}}&lt;/b&gt;. This block redefines the minimum value to &lt;b&gt;{{requestedValue}}&lt;/b&gt;." translation="" />
	<label commandName="ConfigRulesStringBlockStatusDescriptionConstrainMinValue" devLabel="This aspect is already set to &lt;b&gt;{{initialValue}}&lt;/b&gt; by another block in rule: &lt;b&gt;{{ruleName}}&lt;/b&gt;. You can set a minimum that includes &lt;b&gt;{{requestedValue}}&lt;/b&gt;, but the value will always be set to &lt;b&gt;{{initialValue}}&lt;/b&gt;." translation="" />
	<label commandName="ConfigRulesStringBlockStatusDescriptionConstrainValueError" devLabel="This aspect is already set to &lt;b&gt;{{initialValue}}&lt;/b&gt; by another block in rule: &lt;b&gt;{{ruleName}}&lt;/b&gt;. You can't set it to any other value." translation="" />
	<label commandName="ConfigRulesStringBlockStatusDescriptionConstrainValueMaxError" devLabel="The maximum of this aspect is already set to &lt;b&gt;{{initialValue}}&lt;/b&gt; by another block in rule: &lt;b&gt;{{ruleName}}&lt;/b&gt;. You can't set the value above &lt;b&gt;{{initialValue}}&lt;/b&gt;." translation="" />
	<label commandName="ConfigRulesStringBlockStatusDescriptionConstrainValueMinError" devLabel="The minimum of this aspect is already set to &lt;b&gt;{{initialValue}}&lt;/b&gt; by another block in rule: &lt;b&gt;{{ruleName}}&lt;/b&gt;. You can't set the value below &lt;b&gt;{{initialValue}}&lt;/b&gt;." translation="" />
	<label commandName="ConfigRulesStringBlockStatusDescriptionConstrainValues" devLabel="This aspect is already constrained by another block in rule: &lt;b&gt;{{ruleName}}&lt;/b&gt;. Only the values that appear in both lists will be included in the list of valid values. All other values will be excluded." translation="" />
	<label commandName="ConfigRulesStringBlockStatusDescriptionConstrainValuesError" devLabel="This aspect is already constrained by another block in rule: &lt;b&gt;{{ruleName}}&lt;/b&gt;. The values selected in this block are already excluded from the list of valid values." translation="" />
	<label commandName="ConfigRulesStringBlockStatusDescriptionCycle" devLabel="This aspect is referenced in Getter and Setter blocks. When the value in the Setter block changes, it could change the value fetched by the Getter block, which then could change the value in the Setter block again. This may cause a cycle that produces unstable rule results." translation="" />
	<label commandName="ConfigRulesStringBlockStatusDescriptionErrorInactive" devLabel="This block contains errors that affect inactive configurations.&lt;br/&gt;Activate the first affected configuration to review specific errors: &lt;b&gt;{{configName}}&lt;/b&gt;." translation="" />
	<label commandName="ConfigRulesStringBlockStatusDescriptionIncomplete" devLabel="This block is incomplete. It is ignored in the rule until you complete it." translation="" />
	<label commandName="ConfigRulesStringBlockStatusDescriptionInfoInactive" devLabel="This block contains information in inactive configurations.&lt;br/&gt;Activate the first affected configuration to review specific information: &lt;b&gt;{{configName}}&lt;/b&gt;." translation="" />
	<label commandName="ConfigRulesStringBlockStatusDescriptionInvalidInput" devLabel="This block is missing some required data. Recreate the block or contact Autodesk Support if the issue persists." translation="" />
	<label commandName="ConfigRulesStringBlockStatusDescriptionSnapInfoConstrain" devLabel="This block sets &lt;b&gt;{{jointName}} {{secondarySnap}}&lt;/b&gt; to the same component as &lt;b&gt;{{primarySnap}}&lt;/b&gt;. Joint snaps cannot point to the same component. The last valid snap will always be selected." translation="" />
	<label commandName="ConfigRulesStringBlockStatusDescriptionSnapWarnConstrain" devLabel="This block sets &lt;b&gt;{{jointName}} {{secondarySnap}}&lt;/b&gt; to the same component as &lt;b&gt;{{primarySnap}}&lt;/b&gt;. Joint snaps cannot point to the same component." translation="" />
	<label commandName="ConfigRulesStringBlockStatusDescriptionUnhandledError" devLabel="This block encountered an unknown error. Contact Autodesk Support." translation="" />
	<label commandName="ConfigRulesStringBlockStatusDescriptionUnknownInfo" devLabel="This block has an unknown information status. Contact Autodesk Support." translation="" />
	<label commandName="ConfigRulesStringBlockStatusDescriptionUnknownWarning" devLabel="This block encountered an unknown warning. Contact Autodesk Support." translation="" />
	<label commandName="ConfigRulesStringBlockStatusDescriptionWarningInactive" devLabel="This block contains warnings that affect inactive configurations.&lt;br/&gt;Activate the first affected configuration to review specific warnings: &lt;b&gt;{{configName}}&lt;/b&gt;." translation="" />
	<label commandName="ConfigRulesStringBlockStatusTitleConstrain" devLabel="Aspect is constrained by another block" translation="" />
	<label commandName="ConfigRulesStringBlockStatusTitleConstrainAllValuesError" devLabel="Aspect list excludes all values" translation="" />
	<label commandName="ConfigRulesStringBlockStatusTitleConstrainError" devLabel="Aspect is already constrained" translation="" />
	<label commandName="ConfigRulesStringBlockStatusTitleConstrainMaxMaxError" devLabel="Aspect maximum above maximum constraint" translation="" />
	<label commandName="ConfigRulesStringBlockStatusTitleConstrainMaxMinError" devLabel="Aspect minimum above maximum constraint" translation="" />
	<label commandName="ConfigRulesStringBlockStatusTitleConstrainMaxRedefine" devLabel="Aspect maximum constraint redefined" translation="" />
	<label commandName="ConfigRulesStringBlockStatusTitleConstrainMinMaxError" devLabel="Aspect maximum below minimum constraint" translation="" />
	<label commandName="ConfigRulesStringBlockStatusTitleConstrainMinMinError" devLabel="Aspect minimum below minimum constraint" translation="" />
	<label commandName="ConfigRulesStringBlockStatusTitleConstrainMinRedefine" devLabel="Aspect minimum constraint redefined" translation="" />
	<label commandName="ConfigRulesStringBlockStatusTitleConstrainValue" devLabel="Aspect already set to a single value" translation="" />
	<label commandName="ConfigRulesStringBlockStatusTitleConstrainValueError" devLabel="Aspect is already constrained to a single value" translation="" />
	<label commandName="ConfigRulesStringBlockStatusTitleConstrainValueMaxError" devLabel="Aspect maximum below set value" translation="" />
	<label commandName="ConfigRulesStringBlockStatusTitleConstrainValueMinError" devLabel="Aspect minimum above set value" translation="" />
	<label commandName="ConfigRulesStringBlockStatusTitleConstrainValues" devLabel="Aspect list is already constrained" translation="" />
	<label commandName="ConfigRulesStringBlockStatusTitleCycle" devLabel="Aspect in Getter and Setter may create cycles" translation="" />
	<label commandName="ConfigRulesStringBlockStatusTitleErrorInactive" devLabel="Block error in inactive configuration" translation="" />
	<label commandName="ConfigRulesStringBlockStatusTitleIncomplete" devLabel="Incomplete block" translation="" />
	<label commandName="ConfigRulesStringBlockStatusTitleInfoInactive" devLabel="Block information in inactive configuration" translation="" />
	<label commandName="ConfigRulesStringBlockStatusTitleInvalidInput" devLabel="Valid block data is missing" translation="" />
	<label commandName="ConfigRulesStringBlockStatusTitleSnapInfoConstrain" devLabel="Joint snap list contains an invalid option" translation="" />
	<label commandName="ConfigRulesStringBlockStatusTitleSnapWarnConstrain" devLabel="Both joint snaps point to the same component" translation="" />
	<label commandName="ConfigRulesStringBlockStatusTitleUnhandledError" devLabel="Unknown error" translation="" />
	<label commandName="ConfigRulesStringBlockStatusTitleUnknownInfo" devLabel="Unknown information" translation="" />
	<label commandName="ConfigRulesStringBlockStatusTitleUnknownWarning" devLabel="Unknown warning" translation="" />
	<label commandName="ConfigRulesStringBlockStatusTitleWarningInactive" devLabel="Block warning in inactive configuration" translation="" />
	<label commandName="ConfigRulesStringCanNotLoad" devLabel="Cannot load configuration rules." translation="" />
	<label commandName="ConfigRulesStringCategory" devLabel="Category" translation="" />
	<label commandName="ConfigRulesStringComment" devLabel="Comment" translation="" />
	<label commandName="ConfigRulesStringComponent" devLabel="Component" translation="" />
	<label commandName="ConfigRulesStringComponents" devLabel="Components" translation="" />
	<label commandName="ConfigRulesStringComponentsCategory" devLabel="Components Category" translation="" />
	<label commandName="ConfigRulesStringComponentsCategoryLongDescription" devLabel="Use the Getter block to reference configured component aspects in a logical condition. Use the Setter block to drive or limit configured component aspect values." translation="" />
	<label commandName="ConfigRulesStringComponentsCategoryShortDescription" devLabel="This toolbox category contains Getter and Setter blocks, pre-filled with data specific to configured component aspects like insert, suppression, and visibility." translation="" />
	<label commandName="ConfigRulesStringConfiguration" devLabel="Configuration" translation="" />
	<label commandName="ConfigRulesStringConfigurations" devLabel="Configurations" translation="" />
	<label commandName="ConfigRulesStringConfigurationsCategory" devLabel="Configurations Category" translation="" />
	<label commandName="ConfigRulesStringConfigurationsCategoryLongDescription" devLabel="Use the Getter block to reference configuration names in a logical condition." translation="" />
	<label commandName="ConfigRulesStringConfigurationsCategoryShortDescription" devLabel="This toolbox category contains a Getter block, pre-filled with data specific to configurations." translation="" />
	<label commandName="ConfigRulesStringContactAutodeskSupport" devLabel="Contact Autodesk Support" translation="" />
	<label commandName="ConfigRulesStringDesignExtensionBannerAccessOptions" devLabel="Access Options" translation="" />
	<label commandName="ConfigRulesStringDesignExtensionBannerMessage" devLabel="Configuration Rules is available as part of Design Extension." translation="" />
	<label commandName="ConfigRulesStringEditConfigurationRules" devLabel="Edit Configuration Rules" translation="" />
	<label commandName="ConfigRulesStringError" devLabel="Error" translation="" />
	<label commandName="ConfigRulesStringFailedToApplyError" devLabel="Failed to apply changes to rules because something went wrong with Fusion.&lt;br /&gt;Close Configuration Rules, reopen, recreate your changes, and try again." translation="" />
	<label commandName="ConfigRulesStringFeature" devLabel="Feature" translation="" />
	<label commandName="ConfigRulesStringGetBlockTooltipShortDescription" devLabel="Use the Getter block to define a condition based on the value of a configured aspect." translation="" />
	<label commandName="ConfigRulesStringGetBlockTooltipTitle" devLabel="Getter Block" translation="" />
	<label commandName="ConfigRulesStringInactive" devLabel="Inactive" translation="" />
	<label commandName="ConfigRulesStringInheritedDisabledReasonLongDescription" devLabel="Right-click the disabled parent block to enable this block." translation="" />
	<label commandName="ConfigRulesStringInheritedDisabledReasonShortDescription" devLabel="This block is automatically disabled by a parent block. Disabled blocks do not participate in configuration rules." translation="" />
	<label commandName="ConfigRulesStringLoading" devLabel="Loading configuration rules..." translation="" />
	<label commandName="ConfigRulesStringLogicBlockTitle" devLabel="Logic Block" translation="" />
	<label commandName="ConfigRulesStringLogicBlockTooltipMutatorDescription" devLabel="Adjust the format of the logic. In the flyout, drag blocks from the left and assemble them in the desired format on the right." translation="" />
	<label commandName="ConfigRulesStringLogicBlockTooltipShortDescription" devLabel="Use the Logic block to create logical rules that drive configured aspects. Click the Settings button to adjust the format of the logic." translation="" />
	<label commandName="ConfigRulesStringLogicCategory" devLabel="Logic Category" translation="" />
	<label commandName="ConfigRulesStringLogicCategoryLongDescription" devLabel="Use the Logic block to create logical rules that drive configured aspects. Use the Getter block to reference a configured aspect. Use the Setter block to drive or limit a configured aspect." translation="" />
	<label commandName="ConfigRulesStringLogicCategoryShortDescription" devLabel="This toolbox category contains blocks that define logical conditions." translation="" />
	<label commandName="ConfigRulesStringManuallyDisabledReasonLongDescription" devLabel="Right-click to enable the block." translation="" />
	<label commandName="ConfigRulesStringManuallyDisabledReasonShortDescription" devLabel="This block is manually disabled. Disabled blocks do not participate in configuration rules." translation="" />
	<label commandName="ConfigRulesStringModelingFeature" devLabel="Modeling Feature" translation="" />
	<label commandName="ConfigRulesStringModelingFeatures" devLabel="Modeling Features" translation="" />
	<label commandName="ConfigRulesStringModelingFeaturesCategory" devLabel="Modeling Features Category" translation="" />
	<label commandName="ConfigRulesStringModelingFeaturesCategoryLongDescription" devLabel="Use the Getter block to reference configured modeling feature aspects in a logical condition. Use the Setter block to drive or limit configured modeling feature aspect values." translation="" />
	<label commandName="ConfigRulesStringModelingFeaturesCategoryShortDescription" devLabel="This toolbox category contains Getter and Setter blocks, pre-filled with data specific to configured modeling feature aspects like feature parameters, suppression, and visibility." translation="" />
	<label commandName="ConfigRulesStringName" devLabel="Name" translation="" />
	<label commandName="ConfigRulesStringNotTopLevelBlockDisabledReasonLongDescription" devLabel="Move the block inside a rule block to use it in configuration rules." translation="" />
	<label commandName="ConfigRulesStringNotTopLevelBlockDisabledReasonShortDescription" devLabel="This block is automatically disabled because it is not contained within a rule block." translation="" />
	<label commandName="ConfigRulesStringOfflineError" devLabel="Some configuration data didn't load properly because you're in offline mode. Go online and try again." translation="" />
	<label commandName="ConfigRulesStringPending" devLabel="Pending..." translation="" />
	<label commandName="ConfigRulesStringRule" devLabel="Rule" translation="" />
	<label commandName="ConfigRulesStringRuleBlockTooltipShortDescription" devLabel="Use the Rule block to contain the blocks that make up each logical rule that drives configured aspects." translation="" />
	<label commandName="ConfigRulesStringRuleBlockTooltipTitle" devLabel="Rule Block" translation="" />
	<label commandName="ConfigRulesStringRuleCommentInput" devLabel="This rule does..." translation="" />
	<label commandName="ConfigRulesStringRuleName" devLabel="Rule Name" translation="" />
	<label commandName="ConfigRulesStringRules" devLabel="Rules" translation="" />
	<label commandName="ConfigRulesStringRulesCategory" devLabel="Rules Category" translation="" />
	<label commandName="ConfigRulesStringRulesCategoryLongDescription" devLabel="Use the Rule block to contain the blocks that make up each logical rule that drives configured aspects." translation="" />
	<label commandName="ConfigRulesStringRulesCategoryShortDescription" devLabel="This toolbox category contains blocks to help you set up and annotate Configuration Rules." translation="" />
	<label commandName="ConfigRulesStringRunning" devLabel="Running..." translation="" />
	<label commandName="ConfigRulesStringServiceIssueError" devLabel="Some configuration data didn't load properly because of a service issue. Check the Autodesk Health Dashboard and try again once services are restored." translation="" />
	<label commandName="ConfigRulesStringSet" devLabel="set" translation="" />
	<label commandName="ConfigRulesStringSetBlockTooltipShortDescription" devLabel="Use the Setter block to drive or limit the value of a configured aspect when a condition is met." translation="" />
	<label commandName="ConfigRulesStringSetBlockTooltipTitle" devLabel="Setter Block" translation="" />
	<label commandName="ConfigRulesStringSettings" devLabel="Settings" translation="" />
	<label commandName="ConfigRulesStringShowErrors" devLabel="Show errors" translation="" />
	<label commandName="ConfigRulesStringShowErrorsStatuses" devLabel="Show error statuses" translation="" />
	<label commandName="ConfigRulesStringShowInfoStatuses" devLabel="Show info statuses" translation="" />
	<label commandName="ConfigRulesStringShowInfos" devLabel="Show infos" translation="" />
	<label commandName="ConfigRulesStringShowWarningStatuses" devLabel="Show warning statuses" translation="" />
	<label commandName="ConfigRulesStringShowWarningsStatuses" devLabel="Show warnings" translation="" />
	<label commandName="ConfigRulesStringStatus" devLabel="Status" translation="" />
	<label commandName="ConfigRulesStringStatusBannerErrorMessageOne" devLabel="{{count}} rule is temporarily disabled because it contains errors." translation="" />
	<label commandName="ConfigRulesStringStatusBannerErrorMessageOther" devLabel="{{count}} rules are temporarily disabled because they contain errors." translation="" />
	<label commandName="ConfigRulesStringStatusBannerSuccessMessageOne" devLabel="{{count}} rule was successfully applied to configurations." translation="" />
	<label commandName="ConfigRulesStringStatusBannerSuccessMessageOther" devLabel="{{count}} rules were successfully applied to configurations." translation="" />
	<label commandName="ConfigRulesStringStatusBannerWarningMessageOne" devLabel="{{count}} rule contains a warning that needs your attention." translation="" />
	<label commandName="ConfigRulesStringStatusBannerWarningMessageOther" devLabel="{{count}} rules contain warnings that need your attention." translation="" />
	<label commandName="ConfigRulesStringStatusDescriptionError" devLabel="This rule contains one or more errors. Rules with errors will not run until you resolve them." translation="" />
	<label commandName="ConfigRulesStringStatusDescriptionInactive" devLabel="This rule is inactive. It is not enforced for any configurations in this Configured Design." translation="" />
	<label commandName="ConfigRulesStringStatusDescriptionOff" devLabel="Click to turn the rule on when you're ready to validate and run it." translation="" />
	<label commandName="ConfigRulesStringStatusDescriptionOn" devLabel="Click to turn the rule off if you need to temporarily disable or troubleshoot it." translation="" />
	<label commandName="ConfigRulesStringStatusDescriptionPending" devLabel="This rule has pending changes that are not yet applied." translation="" />
	<label commandName="ConfigRulesStringStatusDescriptionRunning" devLabel="This rule is currently running. This may take a few moments to complete." translation="" />
	<label commandName="ConfigRulesStringStatusDescriptionSuccess" devLabel="This rule is active. It is enforced for all configurations in this Configured Design." translation="" />
	<label commandName="ConfigRulesStringStatusDescriptionTemporaryOff" devLabel="This rule is temporarily disabled because it contains errors." translation="" />
	<label commandName="ConfigRulesStringStatusDescriptionUnhandledError" devLabel="This rule encountered an unknown error. Contact Autodesk Support." translation="" />
	<label commandName="ConfigRulesStringStatusDescriptionWarning" devLabel="This rule contains one or more warnings. Rules with warnings may produce unexpected results until you resolve them." translation="" />
	<label commandName="ConfigRulesStringStatusLongDescriptionAffectedConfigurations" devLabel="Affected configurations: {{configurations}}" translation="" />
	<label commandName="ConfigRulesStringStatusLongDescriptionError" devLabel="Errors: {{errors}}" translation="" />
	<label commandName="ConfigRulesStringStatusLongDescriptionPending" devLabel="Use Apply to commit pending changes and run the updated rule in this Configured Design." translation="" />
	<label commandName="ConfigRulesStringStatusLongDescriptionWarning" devLabel="Warnings: {{warnings}}" translation="" />
	<label commandName="ConfigRulesStringStatusTitleError" devLabel="Rule contains errors" translation="" />
	<label commandName="ConfigRulesStringStatusTitleInactive" devLabel="Rule is inactive" translation="" />
	<label commandName="ConfigRulesStringStatusTitleOff" devLabel="Rule is off" translation="" />
	<label commandName="ConfigRulesStringStatusTitleOn" devLabel="Rule is on" translation="" />
	<label commandName="ConfigRulesStringStatusTitlePending" devLabel="Rule has pending changes" translation="" />
	<label commandName="ConfigRulesStringStatusTitleRunning" devLabel="Rule is running" translation="" />
	<label commandName="ConfigRulesStringStatusTitleSuccess" devLabel="Rule is active" translation="" />
	<label commandName="ConfigRulesStringStatusTitleTemporaryOff" devLabel="Rule is temporarily off" translation="" />
	<label commandName="ConfigRulesStringStatusTitleUnhandledError" devLabel="Unknown error" translation="" />
	<label commandName="ConfigRulesStringStatusTitleWarning" devLabel="Rule contains warnings" translation="" />
	<label commandName="ConfigRulesStringTable" devLabel="Table" translation="" />
	<label commandName="ConfigRulesStringThemeTable" devLabel="Theme Table" translation="" />
	<label commandName="ConfigRulesStringThemeTables" devLabel="Theme Tables" translation="" />
	<label commandName="ConfigRulesStringThemeTablesCategory" devLabel="Theme Tables Category" translation="" />
	<label commandName="ConfigRulesStringThemeTablesCategoryLongDescription" devLabel="Use the Getter block to reference theme selection in a logical condition. Use the Setter block to drive or limit theme selection." translation="" />
	<label commandName="ConfigRulesStringThemeTablesCategoryShortDescription" devLabel="This toolbox category contains Getter and Setter blocks, pre-filled with data specific to theme tables." translation="" />
	<label commandName="ConfigRulesStringTimeoutError" devLabel="Some configuration data didn't load properly because it timed out. Check your internet connection, restart Fusion, and try again." translation="" />
	<label commandName="ConfigRulesStringUnknownReason" devLabel="Some configuration data didn't load properly for an unknown reason." translation="" />
	<label commandName="ConfigRulesStringUserParameter" devLabel="User Parameter" translation="" />
	<label commandName="ConfigRulesStringUserParameters" devLabel="User Parameters" translation="" />
	<label commandName="ConfigRulesStringUserParametersCategory" devLabel="User Parameters Category" translation="" />
	<label commandName="ConfigRulesStringUserParametersCategoryLongDescription" devLabel="Use the Getter block to reference configured user parameters in a logical condition. Use the Setter block to drive or limit configured user parameter values." translation="" />
	<label commandName="ConfigRulesStringUserParametersCategoryShortDescription" devLabel="This toolbox category contains Getter and Setter blocks, pre-filled with data specific to configured user parameters." translation="" />
	<label commandName="ConfigRulesStringValue" devLabel="Value" translation="" />
	<label commandName="ConfigRulesStringViewHealthDashboard" devLabel="View Health Dashboard" translation="" />
	<label commandName="ConfigRulesStringWarning" devLabel="Warning" translation="" />
	<label commandName="ConfigSaveMilestone" devLabel="Failed to save previous milestone Configuration document. Please try saving again." translation="" />
	<label commandName="ConfigSuppression" devLabel="Suppression" translation="" />
	<label commandName="ConfigTableRecoveredData" devLabel=" (Recovered)" translation="" />
	<label commandName="ConfigTappedThreadFullLength" devLabel="Thread Offset Type" translation="" />
	<label commandName="ConfigTappedThreadOffset" devLabel="Thread Offset" translation="" />
	<label commandName="ConfigThreadClass" devLabel="Class" translation="" />
	<label commandName="ConfigThreadDepth" devLabel="Thread Depth" translation="" />
	<label commandName="ConfigThreadDesignation" devLabel="Designation" translation="" />
	<label commandName="ConfigThreadFullLength" devLabel="Full Length" translation="" />
	<label commandName="ConfigThreadLength" devLabel="Length" translation="" />
	<label commandName="ConfigThreadModeled" devLabel="Modeled" translation="" />
	<label commandName="ConfigThreadOffset" devLabel="Offset" translation="" />
	<label commandName="ConfigThreadSettings" devLabel="Thread Settings" translation="" />
	<label commandName="ConfigThreadSize" devLabel="Size" translation="" />
	<label commandName="ConfigThreadType" devLabel="Thread Type" translation="" />
	<label commandName="ConfigVisibility" devLabel="Visibility" translation="" />
	<label commandName="ConfigurationMode" devLabel="Configuration" translation="" />
	<label commandName="ConfigurationRuleErrorDescription" devLabel="One or more rules that affect this configuration contain errors. Rules that contain errors are temporarily off.&lt;br&gt;&lt;br&gt;Use the Configuration Rules tool to view and fix errors." translation="" />
	<label commandName="ConfigurationRuleErrorTitle" devLabel="Configuration Rule in error" translation="" />
	<label commandName="ConfigurationRulesRunByConfigNamesSyncLinkText" devLabel="Display Configuration Tables" translation="" />
	<label commandName="ConfigurationRulesRunByConfigNamesSyncMessage" devLabel="One or more Configuration Names changed since the last time you saved &lt;b&gt;%1%&lt;/b&gt;.&lt;br&gt;&lt;br&gt;A Configuration Rule uses the name to drive one or more values in configurations. The rule changes are applied now and need to be saved." translation="" />
	<label commandName="ConfigurationRulesStatusErrorLinkText" devLabel="View Configuration Rules" translation="" />
	<label commandName="ConfigurationRulesStatusErrorMessage" devLabel="A change to the design caused errors in the following rules: &lt;b&gt;%1%&lt;/b&gt; &lt;br&gt;Rules that contain errors are temporarily off." translation="" />
	<label commandName="ConfigurationRulesViolation" devLabel="Value violates rule" translation="" />
	<label commandName="ConfigurationRulesViolationLinkText" devLabel="View Configuration Rules" translation="" />
	<label commandName="ConfigurationRulesViolationMessage" devLabel="The value you entered for &lt;b&gt;%1%&lt;/b&gt; violates a rule. &lt;b&gt;%2%&lt;/b&gt; reset to its last valid value.&lt;br&gt;&lt;br&gt; Enter a value that meets the conditions of the rule." translation="" />
	<label commandName="ConfiguredComponentXref" devLabel="&lt;b&gt;Configured Component&lt;/b&gt;" translation="" />
	<label commandName="ConfiguredComponentXrefDesciption" devLabel="Right-click to switch to a different Configuration or configure the Insert feature for this component." translation="" />
	<label commandName="ConfiguredDesignName" devLabel="Configured Design: " translation="" />
	<label commandName="ConicCurveConfig" devLabel="Conic Curve" translation="" />
	<label commandName="ConicalTaperTooltip" devLabel="Conical Taper" translation="" />
	<label commandName="ConnectorObstacle" devLabel="Connector Obstacle" translation="" />
	<label commandName="Context" devLabel="Context" translation="" />
	<label commandName="ContourFlangeAgainstDistanceConfigParam" devLabel="Distance 2" translation="" />
	<label commandName="ContourFlangeAlongDistanceConfigParam" devLabel="Distance 1" translation="" />
	<label commandName="ContourFlangeDistanceConfigParam" devLabel="Distance" translation="" />
	<label commandName="ConversionAnalysisCmdTooltip" devLabel="Check conversion" translation="" />
	<label commandName="ConversionErrorFor" devLabel="Conversion error for: " translation="" />
	<label commandName="ConversionFailed1" devLabel="Non extractable Body. Use Repair Tool." translation="" />
	<label commandName="ConversionWarningFor" devLabel="Conversion warning for: " translation="" />
	<label commandName="Convert2TSplineFailed" devLabel="Failed to convert the face to T-Spline" translation="" />
	<label commandName="ConvertRuleSuffix" devLabel=" (Convert)" translation="" />
	<label commandName="CoordinateSystemAlignment" devLabel="Alignment" translation="" />
	<label commandName="CoordinateSystemAngleX" devLabel="X Rotation" translation="" />
	<label commandName="CoordinateSystemAngleY" devLabel="Y Rotation" translation="" />
	<label commandName="CoordinateSystemAngleZ" devLabel="Z Rotation" translation="" />
	<label commandName="CoordinateSystemFeatureCreationFailure" devLabel="Coordinate system feature creation failed." translation="" />
	<label commandName="CoordinateSystemIdCloningFailed" devLabel="CoordinateSystem cloning failed" translation="" />
	<label commandName="CoordinateSystemOffsetX" devLabel="X Offset" translation="" />
	<label commandName="CoordinateSystemOffsetY" devLabel="Y Offset" translation="" />
	<label commandName="CoordinateSystemOffsetZ" devLabel="Z Offset" translation="" />
	<label commandName="CopperHolesName" devLabel="CopperHoles" translation="" />
	<label commandName="CornerComputeUtil.Context" devLabel="Invalid context" translation="" />
	<label commandName="CornerComputeUtil.DetermineBendTypeIndependent" devLabel="The bend type is independent, which is not supported." translation="" />
	<label commandName="CornerComputeUtil.DetermineBendTypeSMTK" devLabel="Error determine bend type." translation="" />
	<label commandName="CornerComputeUtil.DetermineBendTypeUnknown" devLabel="Unknown bend type." translation="" />
	<label commandName="CornerComputeUtil.EdgeSelection" devLabel="Invalid edge selection for corner computation." translation="" />
	<label commandName="CornerComputeUtil.Initialize" devLabel="The initialization of the corner has failed." translation="" />
	<label commandName="CornerComputeUtil.SheetMetalData" devLabel="No sheet metal data found for corner computation." translation="" />
	<label commandName="CornerFeature" devLabel="Corner Closure" translation="" />
	<label commandName="CornerParametricRequest" devLabel="No target component" translation="" />
	<label commandName="CouldNotCreateNewEdge" devLabel="Could not create new edge" translation="" />
	<label commandName="CouldNotCreateNewEdgeDueToHolesOnBothSidesOfTheLoop" devLabel="Could not create new edge due to holes on both sides of the loop" translation="" />
	<label commandName="CouldNotCreateNewEdgeDueToHolesOnBothSidesOfTheLoop2" devLabel="Insert Edge will not work on faces which are not four sided. Try using Subdivide or Insert Point." translation="" />
	<label commandName="CouldNotDuplicateEdgeDueToTOrLpointsOnTheSelectedEdge" devLabel="Could not duplicate edge due to T or L-points on the selected edge" translation="" />
	<label commandName="CouldntFindAnyFaceLoops" devLabel="Couldn't find any face loops" translation="" />
	<label commandName="CounterboreTooltip" devLabel="Counterbore" translation="" />
	<label commandName="CountersinkTooltip" devLabel="Countersink" translation="" />
	<label commandName="CountersunkFlatHeadHexSocketScrewDINENISO10642" devLabel="Countersunk Flat Head Hex Socket Screw DIN EN ISO 10642" translation="" />
	<label commandName="CountersunkFlatHeadHexSocketScrewISO10642" devLabel="Countersunk Flat Head Hex Socket Screw ISO 10642" translation="" />
	<label commandName="CountersunkFlatHeadScrew" devLabel="Countersunk Flat Head Screw" translation="" />
	<label commandName="CountersunkFlatHeadScrewDINENISO2009" devLabel="Countersunk Flat Head Screw DIN EN ISO 2009" translation="" />
	<label commandName="CountersunkFlatHeadScrewISO2009/7046" devLabel="Countersunk Flat Head Screw ISO 2009/7046" translation="" />
	<label commandName="CountersunkHead+WasherGOST12876-67" devLabel="Countersunk Head + Washer GOST 12876-67" translation="" />
	<label commandName="CountersunkHeadGOST12876-67" devLabel="Countersunk Head GOST 12876-67" translation="" />
	<label commandName="CountersunkRaisedHeadScrew" devLabel="Countersunk Raised Head Screw" translation="" />
	<label commandName="CountersunkRaisedHeadScrewISO2010" devLabel="Countersunk Raised Head Screw ISO 2010" translation="" />
	<label commandName="CountersunkRaisedHeadScrewISO2010/7047" devLabel="Countersunk Raised Head Screw ISO 2010/7047" translation="" />
	<label commandName="CountourFlange" devLabel="No target component." translation="" />
	<label commandName="CreaseEdgeFailed" devLabel="Failed to crease the given edges." translation="" />
	<label commandName="CreaseVerticesFailed" devLabel="Failed to crease the given vertices." translation="" />
	<label commandName="CreateBoxFailed" devLabel="Failed to create Box" translation="" />
	<label commandName="CreateComponentFromBodyError" devLabel="Create Component From Body failed:  invalid input" translation="" />
	<label commandName="CreateCylFailed" devLabel="Failed to create Cylinder" translation="" />
	<label commandName="CreateFaceFailed" devLabel="Create Face failed" translation="" />
	<label commandName="CreateGroupFeatureCommandError" devLabel="Create Group Feature Error:  rolled back features not allowed" translation="" />
	<label commandName="CreateGroupFeatureCommandErrorTwoFeatures" devLabel="Create Group Feature Error:  At least 2 features needed for a group" translation="" />
	<label commandName="CreateNurbsFailed" devLabel="Failed to create surface" translation="" />
	<label commandName="CreatePCBComponent_BottomCanvas" devLabel="Board Bottom" translation="" />
	<label commandName="CreatePCBComponent_BottomSilkscreen" devLabel="Silkscreen Bottom" translation="" />
	<label commandName="CreatePCBComponent_TopCanvas" devLabel="Board Top" translation="" />
	<label commandName="CreatePCBComponent_TopSilkscreen" devLabel="Silkscreen Top" translation="" />
	<label commandName="CreatePlaneFailed" devLabel="Failed to create Plane" translation="" />
	<label commandName="CreateQuadFailed" devLabel="Failed to create Quadball" translation="" />
	<label commandName="CreateSphFailed" devLabel="Failed to create Sphere" translation="" />
	<label commandName="CreateTorusFailed" devLabel="Failed to create Torus" translation="" />
	<label commandName="CurvatureCombAnalysisDefaultUserName" devLabel="Curvature" translation="" />
	<label commandName="CurvatureMapAnalysisDefaultUserName" devLabel="CurvatureMap" translation="" />
	<label commandName="CustomConstraintAngle" devLabel="Angle" translation="" />
	<label commandName="CustomConstraintOffset" devLabel="Offset" translation="" />
	<label commandName="CustomConstraintsJointGeometryMissing" devLabel="Update of Auto Joints failed due to missing information." translation="" />
	<label commandName="CustomConstraintsJointUpdateError" devLabel="Geometry used to define Motion Limit Constraint's is missing" translation="" />
	<label commandName="CustomConstraintsJointUpdateNeeded" devLabel="Update of Motion Limit Constraint's geometry needed after geometry change" translation="" />
	<label commandName="CustomUnitSystemName" devLabel="Custom units" translation="" />
	<label commandName="CuttingToolDoesNotIntersectAnySurface" devLabel="Cutting Tool does not intersect any surface!" translation="" />
	<label commandName="CuttingToolNoIntersectionToSurface" devLabel="Cutting Tool does not intersect any surface!" translation="" />
	<label commandName="CycleDependencyError" devLabel="The Break Link operation will be aborted due to cyclic dependency error. Please report this issue to Autodesk!" translation="" />
	<label commandName="Cylinder_Height" devLabel="Cylinder Height" translation="" />
	<label commandName="CylindricalHeadHexSocketScrew+WasherGOST12876-67" devLabel="Cylindrical Head Hex Socket Screw + Washer GOST 12876-67" translation="" />
	<label commandName="CylindricalHeadHexSocketScrewGOST12876-67" devLabel="Cylindrical Head Hex Socket Screw GOST 12876-67" translation="" />
	<label commandName="CylindricalHeadSlottedScrew+WasherGOST12876-67" devLabel="Cylindrical Head Slotted Screw + Washer GOST 12876-67" translation="" />
	<label commandName="CylindricalHeadSlottedScrewGOST12876-67" devLabel="Cylindrical Head Slotted Screw  GOST 12876-67" translation="" />
	<label commandName="CylindricityTooltip" devLabel="Cylindricity" translation="" />
	<label commandName="CylindrifyFailed" devLabel="Cannot cylindrify selected faces. Adjust selection or toggle Auto Feature Selection." translation="" />
	<label commandName="DELETE_FACES_FAILED_TO_FILL_GAP" devLabel="Cannot delete individual faces. To delete the whole body, please use the Browser or Selection Filters." translation="" />
	<label commandName="DERIVED_REFERENCE_NOT_FOUND" devLabel="Corresponding reference not found in referenced design." translation="" />
	<label commandName="DERIVED_SOURCE_MISSING" devLabel="The source FusionComponent cannot be found!" translation="" />
	<label commandName="DIN" devLabel="DIN" translation="" />
	<label commandName="DOC_OPEN_FAILED" devLabel="Failed to open document" translation="" />
	<label commandName="DRAFT_DATA_CORRUPT" devLabel="Draft data model corrupt!" translation="" />
	<label commandName="DRAFT_MISSING_FACE_REFERENCES" devLabel="Missing face references" translation="" />
	<label commandName="DRAFT_MISSING_REFERENCE_PLANE" devLabel="Missing reference plane" translation="" />
	<label commandName="DRAFT_PARTING_LINE_FAILED_SWITCH_DRAFT_SIDE" devLabel="Cannot create draft in the specified direction. Adjust Draft Sides to Symmetric or Two Sides." translation="" />
	<label commandName="DRMATRIX_COMPUTE_FAILED" devLabel="Failed to evaluate the matrix due to the invalid input" translation="" />
	<label commandName="DRMATRIX_NON_LINEAR_GEOM_ERROR" devLabel="Failed to track line segment" translation="" />
	<label commandName="DRPOINT_COMPUTE_FAILED" devLabel="Failed to evaluate the point due to the invalid input" translation="" />
	<label commandName="DRVECTOR_COMPUTE_FAILED" devLabel="Failed to evaluate the direction due to the invalid input" translation="" />
	<label commandName="DcAlignComponentFeatureNoRowDataError" devLabel="Could not find row data for joint feature!" translation="" />
	<label commandName="DcArrangeFeature.MissingAlg" devLabel="Cannot find the arrangement algorithm." translation="" />
	<label commandName="DcArrangeFeatureImplNoneLeafComps" devLabel="Some items cannot be arranged because they have child components. This is either because the design has been modified, or was made with an older version of Fusion.&#09;&#09;&#09; Try re-selecting only leaf components for arrangement. (A leaf has no child components.)" translation="" />
	<label commandName="DcDerivedReferenceFeature_SourceNotMappable" devLabel="Object cannot be mapped from source to derived" translation="" />
	<label commandName="DcDerivedReferenceFeature_UpdateFailed" devLabel="Update of sources to derive failed" translation="" />
	<label commandName="DcFacesMove" devLabel="MoveFace" translation="" />
	<label commandName="DcGroupFeatureDefaultName" devLabel="Group" translation="" />
	<label commandName="DcGroupFeatureName" devLabel="DcGroupFeature" translation="" />
	<label commandName="DcJointAssembleFeatureMakeFailure" devLabel="Creation of Joint Feature failed" translation="" />
	<label commandName="DcPatternSourceError" devLabel="Invalid pattern feature" translation="" />
	<label commandName="DcReferenceFeature_RollAfterReference_NotFound" devLabel="Reference feature not found for rolling." translation="" />
	<label commandName="DcReferenceFeature_RollbackBeginEIP_NotFound" devLabel="Reference feature not found for rollback." translation="" />
	<label commandName="DecalCreationError" devLabel="No targets specified" translation="" />
	<label commandName="DecalPatchDefaultUserName" devLabel="Decal" translation="" />
	<label commandName="DecalPatchSelectionId" devLabel="DecalPatch" translation="" />
	<label commandName="DecalPatchSelectionPluralId" devLabel="DecalPatches" translation="" />
	<label commandName="DecalSelectionCategory" devLabel="Decal" translation="" />
	<label commandName="DecalsBrowserLabel" devLabel="Decals" translation="" />
	<label commandName="DecalsSelectionId" devLabel="Decals" translation="" />
	<label commandName="DefaultMeshOptionGroupMesh" devLabel="Mesh" translation="" />
	<label commandName="DefaultMeshOptionGroupPreferences" devLabel="Preferences that control inserting a mesh" translation="" />
	<label commandName="DefaultSnapName" devLabel="New Snap" translation="" />
	<label commandName="DegreesTooltip" devLabel="Degrees" translation="" />
	<label commandName="DeleteCauseDownstreamFailures" devLabel="Deletion cause downstream feature failures" translation="" />
	<label commandName="DeleteHandleFailed" devLabel="Sections cannot be inserted within the regions controlled by global sections (i.e. where a path curve ends, or where multiple path curves meet). Try inserting the section in a different location, or control the shape using the existing global sections." translation="" />
	<label commandName="DeleteHandleFailed2" devLabel="Unable to delete handle" translation="" />
	<label commandName="DeleteRootComponentError" devLabel="It's not allowed to delete root component" translation="" />
	<label commandName="DeleteTopologyFailed" devLabel="Failed deleting T-Spline entity" translation="" />
	<label commandName="DepthTooltip" devLabel="Depth" translation="" />
	<label commandName="DeriveEntitiesCreateComponentsFromBodiesIsNotSupported" devLabel="This operation is not supported for Derived entities, they will not participate in the operation." translation="" />
	<label commandName="DerivedBaseFeature" devLabel="Derived Base Feature" translation="" />
	<label commandName="DerivedContext" devLabel="DerivedContext" translation="" />
	<label commandName="DerivedSourceMissingStr" devLabel="Unresolved: %1%&lt;br&gt;%2%" translation="" />
	<label commandName="DerivedSuffix" devLabel="(Derive)" translation="" />
	<label commandName="Description" devLabel="Description" translation="" />
	<label commandName="DesignAssetNotFound" devLabel="Design asset not found" translation="" />
	<label commandName="DesignConfigCmdMoveColLeft" devLabel="Move Left" translation="" />
	<label commandName="DesignConfigCmdMoveColRight" devLabel="Move Right" translation="" />
	<label commandName="DesignConfigCmdMoveRowDown" devLabel="Move Down" translation="" />
	<label commandName="DesignConfigCmdMoveRowUp" devLabel="Move Up" translation="" />
	<label commandName="DesignConfigurationCmdActivateColumn" devLabel="Activate Row" translation="" />
	<label commandName="DesignConfigurationCmdAddColumn" devLabel="Add Column" translation="" />
	<label commandName="DesignConfigurationCmdAddColumns" devLabel="Add Columns" translation="" />
	<label commandName="DesignConfigurationCmdAddRow" devLabel="Add Row" translation="" />
	<label commandName="DesignConfigurationCmdAddTable" devLabel="Add Table" translation="" />
	<label commandName="DesignConfigurationCmdDefault" devLabel="Design Configuration" translation="" />
	<label commandName="DesignConfigurationCmdDeleteRow" devLabel="Delete Row" translation="" />
	<label commandName="DesignConfigurationCmdDeleteTable" devLabel="Delete Table" translation="" />
	<label commandName="DesignConfigurationCmdDeletesColumn" devLabel="Delete Column" translation="" />
	<label commandName="DesignConfigurationCmdDeletesColumns" devLabel="Delete Columns" translation="" />
	<label commandName="DesignConfigurationCmdDuplicateRow" devLabel="Duplicate Row" translation="" />
	<label commandName="DesignConfigurationCmdModifyValue" devLabel="Modify Value" translation="" />
	<label commandName="DesignConfigurationCmdModifyValueInMultipleRows" devLabel="Modify Value In Multiple Rows" translation="" />
	<label commandName="DesignConfigurationCmdMoveToChildTable" devLabel="Move To Theme Table" translation="" />
	<label commandName="DesignConfigurationCmdMoveToParentTable" devLabel="Move To Parent Table" translation="" />
	<label commandName="DesignConfigurationCmdRenameColumn" devLabel="Rename Column" translation="" />
	<label commandName="DesignConfigurationCmdRenameRow" devLabel="Rename Row" translation="" />
	<label commandName="DesignConfigurationCmdRenameTable" devLabel="Rename Table" translation="" />
	<label commandName="DesignConfigurationCmdSortColumnsA2Z" devLabel="Sort Columns From A to Z" translation="" />
	<label commandName="DesignConfigurationCmdSortColumnsByDesignOrder" devLabel="Sort Columns By Design Order" translation="" />
	<label commandName="DesignConfigurationCmdSortColumnsZ2A" devLabel="Sort Columns From Z to A" translation="" />
	<label commandName="DesignConfigurationCmdSortPropertyColumnsA2Z" devLabel="Sort Components From A to Z" translation="" />
	<label commandName="DesignConfigurationCmdSortPropertyColumnsByDesignOrder" devLabel="Sort Components By Design Order" translation="" />
	<label commandName="DesignConfigurationCmdSortPropertyColumnsZ2A" devLabel="Sort Components From Z to A" translation="" />
	<label commandName="DesignConfigurationCmdSortRowsA2Z" devLabel="Sort Rows From A to Z" translation="" />
	<label commandName="DesignConfigurationCmdSortRowsZ2A" devLabel="Sort Rows From Z to A" translation="" />
	<label commandName="DesignConfigurationTableGroupSelectionId" devLabel="DesignConfigurationTableGroup" translation="" />
	<label commandName="DesignConfigurationTableRowSelectionId" devLabel="DesignConfigurationTableRow" translation="" />
	<label commandName="DesignConfigurationTableSelectionId" devLabel="DesignConfigurationTable" translation="" />
	<label commandName="DesignPreviewFeatureGroup" devLabel="Design" translation="" />
	<label commandName="DesignPreviewFeatureGroupDescription" devLabel="This section controls optional behavior within the Design workspace." translation="" />
	<label commandName="DetectCircularDependencyInRestructure" devLabel="The restructure is rejected because it will cause circular dependency." translation="" />
	<label commandName="DetectPositionFeatureDependency" devLabel="Detect some position features may result downstream features fail after restructure." translation="" />
	<label commandName="Diameter" devLabel="Diameter" translation="" />
	<label commandName="DiameterTooltip" devLabel="Diameter" translation="" />
	<label commandName="Diameter_Designation" devLabel="Diameter Designation" translation="" />
	<label commandName="DisallowAnyCADBreakLink" devLabel="&lt;b&gt;%1%&lt;/b&gt; is associatively imported in this design. Break Link is not supported." translation="" />
	<label commandName="DisallowAnyCADInserting" devLabel="&lt;b&gt;%1%&lt;/b&gt; is associatively imported in this design. Inserting the same item again is not supported." translation="" />
	<label commandName="DisallowAnyCADPaste" devLabel="&lt;b&gt;%1%&lt;/b&gt; is associatively imported in this design. Paste is not supported." translation="" />
	<label commandName="DisallowDeriveBreakLink" devLabel="&lt;b&gt;%1%&lt;/b&gt; is already Derived into this design. Break Link is not supported." translation="" />
	<label commandName="DisallowDeriveInserting" devLabel="&lt;b&gt;%1%&lt;/b&gt; is already Derived into this design. Inserting it is not supported." translation="" />
	<label commandName="DisallowDerivePaste" devLabel="&lt;b&gt;%1%&lt;/b&gt; is already Derived into this design. Paste is not supported." translation="" />
	<label commandName="DocumentIsMissing" devLabel="Document is missing" translation="" />
	<label commandName="DocumentSettingsBrowserLabel" devLabel="Document Settings" translation="" />
	<label commandName="DocumentStructureTypeAssemblyDesign" devLabel="Assembly Design" translation="" />
	<label commandName="DocumentStructureTypePartDesign" devLabel="Part Design" translation="" />
	<label commandName="DoesNotExistDecalError" devLabel="The image file does not exist" translation="" />
	<label commandName="DownloadConfiguredDesignForConfiguration" devLabel="Couldn't find the Configured Design associated with Configuration at path:%1%" translation="" />
	<label commandName="DownloadError1" devLabel="Could not download latest referenced files. Rate limited by service" translation="" />
	<label commandName="DownloadError2" devLabel="Could not download latest referenced files. No content available" translation="" />
	<label commandName="DownloadError3" devLabel="Could not download latest referenced files. Referenced document(s) is missing" translation="" />
	<label commandName="DownloadError4" devLabel="Could not download latest referenced files" translation="" />
	<label commandName="DownloadError5" devLabel="Could not download latest referenced files" translation="" />
	<label commandName="DraftAnalysisDefaultUserName" devLabel="Draft" translation="" />
	<label commandName="DraftFeatureName" devLabel="Draft" translation="" />
	<label commandName="DraftNotSupportedOnGenericSplineFaces" devLabel="Draft on general spline faces is not supported." translation="" />
	<label commandName="DraftPartingLineFailed" devLabel="Draft operation failed. Adjust the pull direction, parting tool, faces, or angle." translation="" />
	<label commandName="DraftPartingLineNoIntersect" devLabel="Parting line does not intersect the body. Select a parting tool that intersects the body." translation="" />
	<label commandName="Drive_Depth" devLabel="Drive Depth" translation="" />
	<label commandName="Drive_Diameter" devLabel="Drive Diameter" translation="" />
	<label commandName="Drive_Size" devLabel="Drive Size" translation="" />
	<label commandName="Drive_Type" devLabel="Drive Type" translation="" />
	<label commandName="Drive_Width" devLabel="Drive Width" translation="" />
	<label commandName="DrivenDimensionInConfiguredPatternQuantity" devLabel="Driven dimension in configured pattern quantity" translation="" />
	<label commandName="DrivenDimensionInConfiguredPatternQuantityMsg" devLabel="The following configured &lt;b&gt;Pattern Quantity&lt;/b&gt; parameters reference &lt;b&gt;Driven Dimensions.&lt;/b&gt;&lt;br&gt;&lt;/br&gt;&lt;br&gt;&lt;/br&gt;&lt;b&gt;%1%&lt;/b&gt;&lt;br&gt;&lt;/br&gt;To ensure these aspects compute correctly, do one of the following:&lt;ul&gt;&lt;li&gt;Toggle the referenced&lt;b&gt; Driven Dimensions&lt;/b&gt; to &lt;b&gt;Driving&lt;/b&lt;/li&gt; &lt;li&gt;Edit the &lt;b&gt;Pattern Quantity&lt;/b&gt; expression to exclude &lt;b&gt;Driven Dimensions&lt;/b&gt;&lt;/li&gt;&lt;li&gt;Delete the &lt;b&gt;Pattern Quantity&lt;/b&gt; column from the &lt;b&gt;Configuration Table&lt;/b&gt;&lt;/li&gt;&lt;/ul&gt;" translation="" />
	<label commandName="EDGE1_SELECTION_MISSING" devLabel="Missing edge1" translation="" />
	<label commandName="EDGE2_SELECTION_MISSING" devLabel="Missing edge2" translation="" />
	<label commandName="EDGEFLANGE_NO_EDGE_FOUND" devLabel="Edge flange profile is missing.&#10;Edit the Flange feature to reselect missing profiles." translation="" />
	<label commandName="EDGE_REFERENCE_LOST" devLabel="The edge reference is lost and this feature is using cached geometry.&#10;Edit this feature and select new edge references." translation="" />
	<label commandName="EDGE_SELECTIONS_FROM_DIFF_SM_BODIES" devLabel="Cannot create Edge Flanges on multiple bodies at the same time.&#10;Select sheet metal edges on the same body and create separate Flange features for each body." translation="" />
	<label commandName="EDIPDerivedCompErrorStr" devLabel="&lt;b&gt;Edit Initial Position (unavailable)&lt;/b&gt;&lt;br&gt;&lt;br&gt;&lt;b&gt;Edit Initial Position&lt;/b&gt; is unavailable for &lt;b&gt;%1%&lt;/b&gt; because it is a derived component." translation="" />
	<label commandName="EDIPForCompWithExtRefsErrorStr" devLabel="&lt;b&gt;Edit Initial Position (unavailable)&lt;/b&gt;&lt;br&gt;&lt;br&gt;Cannot Edit Initial Position because &lt;b&gt;%1%&lt;/b&gt; has external geometric references." translation="" />
	<label commandName="EDIPMirrorCompErrorStr" devLabel="&lt;b&gt;Edit Initial Position (unavailable)&lt;/b&gt;&lt;br&gt;&lt;br&gt;&lt;b&gt;Edit Initial Position&lt;/b&gt; is unavailable for &lt;b&gt;%1%&lt;/b&gt; because it is a mirrored component." translation="" />
	<label commandName="EDIPPatternCompErrorStr" devLabel="&lt;b&gt;Edit Initial Position (unavailable)&lt;/b&gt;&lt;br&gt;&lt;br&gt;&lt;b&gt;Edit Initial Position&lt;/b&gt; is unavailable for &lt;b&gt;%1%&lt;/b&gt; because it is a patterened component." translation="" />
	<label commandName="EDIPPinErrorStr" devLabel="&lt;b&gt;Edit Initial Position (unavailable)&lt;/b&gt;&lt;br&gt;&lt;br&gt;Edit Initial Position is unavailable in direct modeling mode.&lt;br&gt;&lt;br&gt;Unpin the component or turn on Capture Design History to edit initial position." translation="" />
	<label commandName="EDITED_XREF_OCC_NOT_FOUND" devLabel="The edited occurrence of the referenced design is missing." translation="" />
	<label commandName="EICInvalidOccPath" devLabel="Invalid Component Selection Path to activate EIP." translation="" />
	<label commandName="EICUnresolvedComp" devLabel="Selected Component to activate EIP is unresolved." translation="" />
	<label commandName="EIPCompInstEIPCmdTooltip" devLabel="Edit In Place" translation="" />
	<label commandName="EIPContextDefaultUserName" devLabel="Context" translation="" />
	<label commandName="EIPDetachedReference" devLabel="Detached reference cannot reference parent assembly" translation="" />
	<label commandName="EIPDirectModelParentRef" devLabel="Direct model cannot have associative reference to parent assembly" translation="" />
	<label commandName="EIPInvalidAsset" devLabel="Invalid EIP asset" translation="" />
	<label commandName="EIPInvalidObjectPath" devLabel="Invalid EIP selection path." translation="" />
	<label commandName="EIPInvalidOccPath" devLabel="OccurrencePath does not follow EIP path." translation="" />
	<label commandName="EIPRefActivationReadOnly" devLabel="You cannot edit this assembly reference right now because you do not have edit permission for at least one involved component." translation="" />
	<label commandName="EIPReferenceActivateCmdTooltip" devLabel="Activate Assembly Reference" translation="" />
	<label commandName="EIPReferenceLocal" devLabel="Local" translation="" />
	<label commandName="EIPReferenceSelectionId" devLabel="Assembly Reference" translation="" />
	<label commandName="EIPReferenceSourceTooltip" devLabel="Reference source: %1%" translation="" />
	<label commandName="EIPReferenceTooltipBroken" devLabel="The assembly reference is disassociated from its source design. &#10;Open this component in its own tab, then right-click the errors to fix them." translation="" />
	<label commandName="EIPReferenceTooltipOOD1" devLabel="Changes in %1% affect this reference. Update the Reference to pull those changes into this design." translation="" />
	<label commandName="EIPReferenceTooltipOODInContext" devLabel="The assembly reference is out-of-date. &#10;Use &lt;b&gt;Get All Latest&lt;/b&gt; in the &lt;b&gt;Application Bar&lt;/b&gt; &#10;or open the parent component in its own tab." translation="" />
	<label commandName="EIPReferenceTooltipOODInContext_OAL" devLabel="The assembly reference is out-of-date. &#10;Use &lt;b&gt;Update&lt;/b&gt; in the &lt;b&gt;Application Bar&lt;/b&gt; &lt;/br&gt; &#10;or open the parent component in its own tab." translation="" />
	<label commandName="EIPReferenceTooltipOODOutContext" devLabel="The assembly reference is out-of-date in a &#10;different assembly. Open the parent design &#10;or the associated assembly to update it." translation="" />
	<label commandName="EIPReferenceUnknownTooltip" devLabel="Please export assembly again" translation="" />
	<label commandName="EIPReferencesBrokenTooltip" devLabel="One or more Assembly References are no longer linked to the source assembly." translation="" />
	<label commandName="EIPReferencesBrowserLabel" devLabel="Assembly References" translation="" />
	<label commandName="EIPReferencesSelectionId" devLabel="Assembly References" translation="" />
	<label commandName="EIPReferencesTooltip" devLabel="One or more Assembly References are not synchronized with their parent." translation="" />
	<label commandName="EIPReferencesUnknownTooltip" devLabel="Please export assembly again" translation="" />
	<label commandName="EIPSelectionNotInCachedObject" devLabel="Selection not found in cached body or sketch." translation="" />
	<label commandName="EIPSelectionNotMatched" devLabel="Selection lost after cache compute." translation="" />
	<label commandName="EIPSessionExpected" devLabel="Expected edit-in-place session" translation="" />
	<label commandName="EIPUnsupportedObjectPath" devLabel="ObjectPath does not follow EIP path." translation="" />
	<label commandName="EIP_DCF_UPDATE_FAILED" devLabel="Failed to update Assembly Context" translation="" />
	<label commandName="EIP_UPDATE_CONTEXT_ASSETLOAD_FAILED" devLabel="Failed to load source design." translation="" />
	<label commandName="EIP_UPDATE_CONTEXT_COMPUTE_FAILED" devLabel="Failed to compute source design." translation="" />
	<label commandName="EIP_UPDATE_CONTEXT_FAILED" devLabel="Failed to synchronize the context. It looks like you aren't connected to the internet. Please check your connection and try again." translation="" />
	<label commandName="EIP_UPDATE_CONTEXT_OPENSOURCE_FAILED" devLabel="Failed to open source design." translation="" />
	<label commandName="EIP_UPDATE_CONTEXT_ROLLBACK_FAILED" devLabel="Failed to roll back source design." translation="" />
	<label commandName="EIP_UPDATE_CONTEXT_SOURCE_UNAVAILABLE" devLabel="Failed to access source design." translation="" />
	<label commandName="EMBOSS_CANNOT_ORIENT_PROFILE" devLabel="Cannot emboss selected profile on selected faces. Adjust proximity of sketch profiles to selected faces. Ensure each selected face is a developable surface on a solid body." translation="" />
	<label commandName="EMBOSS_CREATED_BROKEN_CURVES" devLabel="Cannot emboss selected profile on selected faces. Adjust proximity of sketch profiles to selected faces." translation="" />
	<label commandName="EMBOSS_DISCONNECTED_TARGET_FACES" devLabel="Selected faces are not connected. If disconnected faces are automatically selected, uncheck Tangent Chain, then select adjacent faces." translation="" />
	<label commandName="EMBOSS_ERROR_CANNOT_BE_WRAPPED" devLabel="Cannot emboss selected faces. Ensure each selected face is a developable surface on a solid body." translation="" />
	<label commandName="EMBOSS_ERROR_NON_PLANAR_PROFILES" devLabel="Sketch profiles are not coplanar. Deselect sketch profiles that are not on the same plane." translation="" />
	<label commandName="EMBOSS_ERROR_OPEN_WIRE" devLabel="Selection is an open sketch curve. Select a closed sketch profile." translation="" />
	<label commandName="EMBOSS_ERROR_TARGET_BODY_NOT_SOLID" devLabel="Selected faces are not on a solid body. Ensure each selected face is a developable surface on a solid body." translation="" />
	<label commandName="EMBOSS_ERROR_TARGET_FACES_FROM_DIFF_BODIES" devLabel="Selected faces are not on the same body. Select faces on the same body to emboss." translation="" />
	<label commandName="EMBOSS_GENERIC_FEATURE_FAILURE" devLabel="Cannot create emboss feature. Adjust sketch profiles, faces, emboss depth, effect, or alignment options." translation="" />
	<label commandName="EMBOSS_INVALID_DEPTH" devLabel="Emboss depth value is invalid. Adjust depth." translation="" />
	<label commandName="EMBOSS_INVALID_ROTATION_ANGLE" devLabel="Emboss rotation angle value is invalid. Adjust rotation angle." translation="" />
	<label commandName="EMBOSS_NO_WRAP_GEOMETRY" devLabel="Emboss result falls outside boundary of selected faces. Add adjacent faces to selection, adjust distance and rotation angle, or adjust proximity of sketch profiles to selected faces." translation="" />
	<label commandName="EMBOSS_SELF_INTERSECTING_BODY" devLabel="Sketch profiles create a self-intersecting body. Adjust depth of emboss or size of sketch profile." translation="" />
	<label commandName="EMBOSS_SOURCE_PROFILE_LOST" devLabel="Sketch profiles are invalid. Ensure sketch profiles are closed, do not use single line fonts, and have not been deleted." translation="" />
	<label commandName="EMBOSS_TARGET_FACE_LOST" devLabel="Faces to emboss are invalid. Ensure each selected face is a developable surface on a solid body." translation="" />
	<label commandName="EMBOSS_THICKEN_FAILURE" devLabel="Cannot create emboss feature at specified depth. Adjust depth." translation="" />
	<label commandName="ENTITY_REFERENCE_LOST" devLabel="Some input geometry cannot be found. Try editing this feature to reselect the lost inputs." translation="" />
	<label commandName="ENTITY_REFERENCE_LOST_USE_CACHE" devLabel="The model is using cached geometry to solve. Please reselect reference geometry for failed features in the timeline." translation="" />
	<label commandName="ERROR_CREATING_DERIVE_FEATURE" devLabel="Error creating external derive feature." translation="" />
	<label commandName="EXTRUDE_CREATION_FAIL_ERROR" devLabel="Cannot complete extrusion." translation="" />
	<label commandName="EXTRUDE_MULTIPLE_WIRE_ERROR" devLabel="Cannot create toolbody as multiple wired body is not allowed" translation="" />
	<label commandName="EXTRUDE_THROUGH_ALL_ERROR" devLabel="Cannot create toolbody for Through All, please check inputs" translation="" />
	<label commandName="EXTRUDE_ZERO_DISTANCE_ERROR" devLabel="Cannot extend extrusion to object. The extrusion profile falls outside the boundary of the selected body. Select a face or plane instead, or adjust the profile so that it falls inside the boundary of the selected body." translation="" />
	<label commandName="EdgeFlange" devLabel="No target component." translation="" />
	<label commandName="EdgeFlangeFirstOffsetConfigParam" devLabel="Offset 1" translation="" />
	<label commandName="EdgeFlangeSecondOffsetConfigParam" devLabel="Offset 2" translation="" />
	<label commandName="EdgeFlangeWidth1ConfigParam" devLabel="Distance 1" translation="" />
	<label commandName="EdgeFlangeWidth2ConfigParam" devLabel="Distance 2" translation="" />
	<label commandName="EdgeRipErrorNoEdge" devLabel="No edge provided for edge rip." translation="" />
	<label commandName="EdgesForJONotParallelOrIntersectError" devLabel="Joint Origin from two edges failed:  Input lines must intersect or be parallel" translation="" />
	<label commandName="EditDcCanvasError" devLabel="Invalid canvas feature" translation="" />
	<label commandName="EditPCBPackageFileError" devLabel="Input package file not opened" translation="" />
	<label commandName="EditPCBPackageInputModelError" devLabel="Input package model is invalid" translation="" />
	<label commandName="EditingOffsetSketchError" devLabel="Invalid editing input found" translation="" />
	<label commandName="EmbossAlign" devLabel="Alignment" translation="" />
	<label commandName="EmbossAngle" devLabel="Rotation Angle" translation="" />
	<label commandName="EmbossDepth" devLabel="Depth" translation="" />
	<label commandName="EmbossFeatureName" devLabel="Emboss" translation="" />
	<label commandName="EmbossHorizDist" devLabel="Horizontal Distance" translation="" />
	<label commandName="EmbossVertDist" devLabel="Vertical Distance" translation="" />
	<label commandName="EmptyComponentName" devLabel="Component Name is empty." translation="" />
	<label commandName="EmptyFolderInput" devLabel="Location is empty." translation="" />
	<label commandName="EmptyModelInFileError" devLabel="The associated file is missing 3D geometry. Check the 3D model for 3D content. " translation="" />
	<label commandName="Enclosure Feature" devLabel="Fluid Volume" translation="" />
	<label commandName="EnclosureExternal" devLabel="No external void has been detected for given inputs. Please try to increase the offset." translation="" />
	<label commandName="EnvelopeTooltip" devLabel="Envelope" translation="" />
	<label commandName="ErrAsmEntData" devLabel="Body, face, edge or vertex" translation="" />
	<label commandName="ErrBodyData" devLabel="Body" translation="" />
	<label commandName="ErrEdgeData" devLabel="Edge" translation="" />
	<label commandName="ErrFaceData" devLabel="Face" translation="" />
	<label commandName="ErrFastenerMissingHubWritePermission2" devLabel="You don't have write permission to this hub.&lt;br&gt;&lt;br&gt;Contact the hub administrator to assign you &lt;b&gt;Hub Member&lt;/b&gt; or &lt;b&gt;Hub Administrator&lt;/b&gt; role." translation="" />
	<label commandName="ErrFastenerPublishConflict" devLabel="A newer version of the &lt;b&gt;Fastener Family&lt;/b&gt; already exists in the target library.&lt;br&gt;&lt;br&gt;Dismiss and try again." translation="" />
	<label commandName="ErrFastenerSomethingWentWrong" devLabel="Something went wrong...&lt;br&gt;&lt;br&gt;If the problem persists, contact support." translation="" />
	<label commandName="ErrFastenerTimedOut" devLabel="The operation has timed out.&lt;br&gt;&lt;br&gt;If the problem persists, contact support." translation="" />
	<label commandName="ErrLibraryWorfklowUnknown" devLabel="Unknown Error." translation="" />
	<label commandName="ErrProfileData" devLabel="Profile" translation="" />
	<label commandName="ErrVertData" devLabel="Vertex" translation="" />
	<label commandName="ErrorLoadingDesignAsset" devLabel="Could not load Design Asset in latest target document:%1%!!" translation="" />
	<label commandName="ErrorLoadingOtherDesignAsset" devLabel="Could not load other Assets in the latest target document: %1%!!" translation="" />
	<label commandName="ErrorOpeningFile" devLabel="Could not open latest file %1% into memory" translation="" />
	<label commandName="ErrorUpdateConfig" devLabel="Could not update Config Document %1% using Factory" translation="" />
	<label commandName="ExtendDistance" devLabel="Distance" translation="" />
	<label commandName="ExtentDistanceConfigParam" devLabel="Distance" translation="" />
	<label commandName="ExtentLineBody" devLabel="Extent Lines" translation="" />
	<label commandName="ExternalDeriveFeatureName" devLabel="Derived from %1% v%2%" translation="" />
	<label commandName="ExternalDeriveFeatureName_Short" devLabel="Derived from %1%" translation="" />
	<label commandName="ExternalDeriveFeatureName_ccy" devLabel="Derived from %1%" translation="" />
	<label commandName="ExternalDeriveRequestNotCloud" devLabel="Cannot derive from versionless design" translation="" />
	<label commandName="ExternalDeriveRequestNotCloud_ccy" devLabel="Cannot derive from a design that has no recorded changes" translation="" />
	<label commandName="ExternalDerived" devLabel="ExternalDerived" translation="" />
	<label commandName="ExternalDerivedComponent" devLabel="derived" translation="" />
	<label commandName="ExternalDerivedSuffix" devLabel=" (Derived)" translation="" />
	<label commandName="Extrude" devLabel="No target component." translation="" />
	<label commandName="ExtrudeDistance" devLabel="Distance" translation="" />
	<label commandName="ExtrudeFeatSide1Dir" devLabel="Side 1" translation="" />
	<label commandName="ExtrudeFeatSide2Dir" devLabel="Side 2" translation="" />
	<label commandName="ExtrudeFeatureName" devLabel="Extrude" translation="" />
	<label commandName="ExtrudeOffset" devLabel="Offset" translation="" />
	<label commandName="ExtrudeTaperAngle" devLabel="Taper Angle" translation="" />
	<label commandName="ExtrudeWallThickness" devLabel="Wall Thickness" translation="" />
	<label commandName="FACE_REFERENCE_LOST" devLabel="The face reference is lost and this feature is using cached geometry.&#10;Edit this feature and select new face references." translation="" />
	<label commandName="FAILED_TO_RESOLVE_TR" devLabel="Cannot compute assembly relationship, &lt;b&gt;%1%&lt;/b&gt;, because it is affected by downstream features.&lt;br/&gt;Inspect downstream features that affect the geometry and consider creating them before &lt;b&gt;%1%&lt;/b&gt; in the Timeline." translation="" />
	<label commandName="FAIL_TO_COPY_INSTANCE" devLabel="Copy of instance failed" translation="" />
	<label commandName="FAIL_TO_CUT_INSTANCE" devLabel="Cut of instance failed" translation="" />
	<label commandName="FAIL_TO_EVALUATE_ANNOTATION_PLANE_NORMAL" devLabel="Failed to evaluate the annotation plane. Please update the annotated geometry." translation="" />
	<label commandName="FAIL_TO_EVALUATE_ANNOTATION_POINT" devLabel="Failed to evaluate the annotation point. Please update the annotation point or the annotated geometry." translation="" />
	<label commandName="FEATURE_ENTITY_TYPE_INVALID" devLabel="Entity type is invalid" translation="" />
	<label commandName="FEATURE_FAILED_TO_CREATE" devLabel="Failed to create feature" translation="" />
	<label commandName="FEATURE_MISSING_INPUTS" devLabel="Missing inputs" translation="" />
	<label commandName="FEATURE_OPERATION_ID_ERROR" devLabel="No allocated operation ids" translation="" />
	<label commandName="FEATURE_PROFILE_ALTERED_RESELECT" devLabel="The selected profile was altered, and some of the input geometry is missing. Edit Contour Flange and select new profiles." translation="" />
	<label commandName="FEATURE_REFERENCE_LOST" devLabel="Reference is lost" translation="" />
	<label commandName="FEATURE_SOLVER_NO_SOLUTION_FOUND" devLabel="Solver did not reach a solution" translation="" />
	<label commandName="FILLET_BRANCHING_CHAIN_ERROR" devLabel="Cannot maintain offset value for all edges in selection set. Move branching edges to a separate selection or change radius type to another one." translation="" />
	<label commandName="FILLET_DATA_CORRUPT" devLabel="Virable radius fillet data modle corrupt!" translation="" />
	<label commandName="FILLET_NO_EDGE_FOUND" devLabel="No fillet edge found." translation="" />
	<label commandName="FILLET_NO_FACE_FOUND" devLabel="A crucial face is missing." translation="" />
	<label commandName="FILLET_TANGENT_CHAIN_ISSUE" devLabel="There was a problem accepting the sequences of edges to fillet. Tangent Chain option was turned off " translation="" />
	<label commandName="FLATPATTERN_ALIGNMENT_LOST_EDGE_REF" devLabel="The alignment edge reference was lost. The orientation of the flat pattern may have changed." translation="" />
	<label commandName="FLATPATTERN_COLLISION" devLabel="Collisions found while flattening, cannot generate flatpattern." translation="" />
	<label commandName="FLATPATTERN_ERROR" devLabel="Flatpattern generation failed." translation="" />
	<label commandName="FLATPATTERN_FEATURE_NO_ALIGN_FACE" devLabel="Alignment face not available.   " translation="" />
	<label commandName="FLATPATTERN_USING_CACHE_ALIGN_FACE" devLabel="Align face not found. Used a cached face for flattening.   " translation="" />
	<label commandName="FPExportDXFError" devLabel="There was an unexpected problem with exporting the flat pattern as a DXF file." translation="" />
	<label commandName="FUSION_SERVER_FEATURE_REQUIREMENTS_ERROR" devLabel="Feature inputs not meeting minimum requirements to execute the request" translation="" />
	<label commandName="FUSION_SERVER_INTERNAL_ERROR" devLabel="Server internal error" translation="" />
	<label commandName="FaceSetName" devLabel="FaceSet" translation="" />
	<label commandName="FaceeRipErrorNoFace" devLabel="No face provided for face rip." translation="" />
	<label commandName="FacetAngleConfigInfo" devLabel="Facet Angle" translation="" />
	<label commandName="FacetControlConfig" devLabel="Facet Control" translation="" />
	<label commandName="FacetDistanceConfigInfo" devLabel="Facet Distance" translation="" />
	<label commandName="FacetNumberConfigInfo" devLabel="Facet Number" translation="" />
	<label commandName="Fail2AddCnstr" devLabel="Failed to create an assembly constraint." translation="" />
	<label commandName="FailEmptyIDFFile" devLabel="IDF File is empty." translation="" />
	<label commandName="FailToGenerateIDFData" devLabel="Fail to generate board data for IDF update." translation="" />
	<label commandName="FailToGetModel" devLabel="Failed to get component 3D package due to possible network or server issue." translation="" />
	<label commandName="FailToHydrateTemplate" devLabel="Fail to compute component from parameters provided." translation="" />
	<label commandName="FailedOpenLatestDoc" devLabel="Failed to open latest version of document." translation="" />
	<label commandName="FailedToCreatePCBComponents" devLabel="Failed to create PCB components." translation="" />
	<label commandName="FailedToCreateSimModelAsset" devLabel="Failed to create Model asset." translation="" />
	<label commandName="FailedToEraseAndFillGivenFaces" devLabel="Failed to erase and fill given faces." translation="" />
	<label commandName="FailedToFillHoleWithGivenEedge" devLabel="Failed to fill hole with given edge." translation="" />
	<label commandName="FailedToSolveGap" devLabel="Failed to fix %1% number of small gaps" translation="" />
	<label commandName="FailedToUpdateUnitSystem" devLabel="Failed to update units in unit system." translation="" />
	<label commandName="FailureToFindSourceDocument" devLabel="Failed to find the Source Document of Derived Entities" translation="" />
	<label commandName="FakeGenerate" devLabel="Fake error" translation="" />
	<label commandName="Family_Name" devLabel="Family Name" translation="" />
	<label commandName="FastenerInsertFeatureXRef" devLabel="Insert" translation="" />
	<label commandName="FastenerItemFeatureXRef" devLabel="Library Item" translation="" />
	<label commandName="FastenerNutFeatureXRef" devLabel="Nut" translation="" />
	<label commandName="FastenerScrewFeatureXRef" devLabel="Screw" translation="" />
	<label commandName="FastenerStackAnalysisClusterDisplayName" devLabel="Fastener Stack" translation="" />
	<label commandName="FastenerStackAnalysisClusterSelectionFilter" devLabel="Fastener Stacks" translation="" />
	<label commandName="FastenerStackAnalysisClusterSelectionName" devLabel="Fastener Stack" translation="" />
	<label commandName="FastenerStackAnalysisClusterWarningTooltip" devLabel="Engagement issue(s):" translation="" />
	<label commandName="FastenerStackAnalysisCompInstCategory" devLabel="Fastener Stack Analysis Components" translation="" />
	<label commandName="FastenerStackAnalysisCompInstFastenerOutOfDateHint" devLabel="Edit Fastener to select a new fastener." translation="" />
	<label commandName="FastenerStackAnalysisCompInstSelectionName" devLabel="Fastener Analyses Instance" translation="" />
	<label commandName="FastenerStackAnalysisDefaultUserName" devLabel="Fastener Stack Analysis" translation="" />
	<label commandName="FastenerStackAnalysisSelectionId" devLabel="Fastener Stack Analysis" translation="" />
	<label commandName="FastenerStackAnalysisWarningTooltip" devLabel="Some fastener stacks don’t meet the engagement rules set by their components." translation="" />
	<label commandName="FastenerStackUpdateFastenerCouldNotBeUpdated" devLabel="%1% could not be updated." translation="" />
	<label commandName="FastenerStackUpdateFastenerSizeNotComputed" devLabel="The fastener replacement size could not be computed." translation="" />
	<label commandName="FastenerStackUpdateMisingFinish" devLabel="A matching finish was not found for the fastener replacement." translation="" />
	<label commandName="FastenerStackUpdateMissingDocumentName" devLabel="Missing document name for the fastener replacement." translation="" />
	<label commandName="FastenerStackUpdateMissingFamily" devLabel="Missing fastener family." translation="" />
	<label commandName="FastenerStackUpdateMissingFilenameId" devLabel="Missing filename ID for the fastener replacement." translation="" />
	<label commandName="FastenerStackUpdateMissingMaterial" devLabel="A matching material was not found for the fastener replacement." translation="" />
	<label commandName="FastenerStackUpdateMissingRefGeom" devLabel="Missing reference geometry." translation="" />
	<label commandName="FastenerStackUpdateMissmatchKeyColumns" devLabel="Missmatch in the key columns." translation="" />
	<label commandName="FastenerStackUpdateNoReplacementFound" devLabel="No suitable fastener replacement found." translation="" />
	<label commandName="FastenerStackUpdateUnableToGetMember" devLabel="Unable to get the fastener replacement based on the key column values." translation="" />
	<label commandName="FastenerStackUpdateUnableToGetTemplate" devLabel="Unable to get the fastener replacement template." translation="" />
	<label commandName="FastenerWasherFeatureXRef" devLabel="Washer" translation="" />
	<label commandName="Fastener_Feature_Compute_Warning" devLabel="Update the fastener" translation="" />
	<label commandName="FastenersAutoSizeIsNotOk" devLabel="The fastener no longer fits the selected geometry." translation="" />
	<label commandName="FastenersUtils_findNearestLengthItem_IdealTooLong" devLabel="The ideal length is too long for the current family." translation="" />
	<label commandName="FastenersUtils_findNearestLengthItem_IdealTooShort" devLabel="The ideal length is too short for the current family." translation="" />
	<label commandName="FeatRuleNotActivated" devLabel="Could not set the Rule as Default." translation="" />
	<label commandName="FeatRuleNotCloned" devLabel="Could not duplicate a Rule." translation="" />
	<label commandName="FeatRuleNotDeleted" devLabel="Could not delete a Rule as some component is using it or the Rule does not exist." translation="" />
	<label commandName="FeatRuleNotUpdated" devLabel="Could not update a Rule." translation="" />
	<label commandName="FeatRuleSelectionId" devLabel="FeatRule" translation="" />
	<label commandName="Feature" devLabel="Feature" translation="" />
	<label commandName="FeatureAlign" devLabel="Align" translation="" />
	<label commandName="FeatureAlignComponent" devLabel="AlignComponent" translation="" />
	<label commandName="FeatureArrange" devLabel="Arrange" translation="" />
	<label commandName="FeatureAsBuilt" devLabel="As-built" translation="" />
	<label commandName="FeatureAssemble" devLabel="Assemble" translation="" />
	<label commandName="FeatureAutomatedModeling" devLabel="AutomatedModeling" translation="" />
	<label commandName="FeatureBodyComp" devLabel="Body-&gt;Comp" translation="" />
	<label commandName="FeatureBoltConn" devLabel="Bolted Connection" translation="" />
	<label commandName="FeatureBoss" devLabel="Boss" translation="" />
	<label commandName="FeatureBoxPrimitive" devLabel="BoxPrimitive" translation="" />
	<label commandName="FeatureCanvas" devLabel="Canvas" translation="" />
	<label commandName="FeatureCategory" devLabel="Features" translation="" />
	<label commandName="FeatureChamfer" devLabel="Chamfer" translation="" />
	<label commandName="FeatureCircularComponentPattern" devLabel="C-Pattern" translation="" />
	<label commandName="FeatureCircularPattern" devLabel="C-Pattern" translation="" />
	<label commandName="FeatureCoilPrimitive" devLabel="CoilPrimitive" translation="" />
	<label commandName="FeatureCombine" devLabel="Combine" translation="" />
	<label commandName="FeatureComplexPattern" devLabel="G-Pattern" translation="" />
	<label commandName="FeatureConvertToSheetMetal" devLabel="ConvertToSheetMetal" translation="" />
	<label commandName="FeatureCoordinateSystem" devLabel="CoordinateSystem" translation="" />
	<label commandName="FeatureCopyPaste" devLabel="CopyPaste" translation="" />
	<label commandName="FeatureCopyPasteBodies" devLabel="CopyPasteBodies" translation="" />
	<label commandName="FeatureCreateComponent" devLabel="CreateComponent" translation="" />
	<label commandName="FeatureCutPaste" devLabel="CutPaste" translation="" />
	<label commandName="FeatureCutPasteBodies" devLabel="CutPasteBodies" translation="" />
	<label commandName="FeatureCylinderPrimitive" devLabel="CylinderPrimitive" translation="" />
	<label commandName="FeatureDecal" devLabel="Decal" translation="" />
	<label commandName="FeatureDeleteBody" devLabel="RemoveBody" translation="" />
	<label commandName="FeatureDeleteFace" devLabel="DeleteFace" translation="" />
	<label commandName="FeatureDeleteInstance" devLabel="RemoveInstance" translation="" />
	<label commandName="FeatureDraft" devLabel="Draft" translation="" />
	<label commandName="FeatureExtrude" devLabel="Extrude" translation="" />
	<label commandName="FeatureFillet" devLabel="Fillet" translation="" />
	<label commandName="FeatureForm" devLabel="Form" translation="" />
	<label commandName="FeatureGeometricRelationship" devLabel="GeometricRelationship" translation="" />
	<label commandName="FeatureGeometricRelationshipString" devLabel="Geometric Relationship" translation="" />
	<label commandName="FeatureHole" devLabel="Hole" translation="" />
	<label commandName="FeatureHoleThreadNote" devLabel="HoleThreadNote" translation="" />
	<label commandName="FeatureJointOrigin" devLabel="JointOrigin" translation="" />
	<label commandName="FeatureLeaderLineNote" devLabel="LeaderLineNote" translation="" />
	<label commandName="FeatureLip" devLabel="Lip" translation="" />
	<label commandName="FeatureLoft" devLabel="Loft" translation="" />
	<label commandName="FeatureMesh" devLabel="Mesh" translation="" />
	<label commandName="FeatureMidSurface" devLabel="MidSurface" translation="" />
	<label commandName="FeatureMirrorPattern" devLabel="Mirror" translation="" />
	<label commandName="FeatureModEmboss" devLabel="Emboss" translation="" />
	<label commandName="FeatureMotionLink" devLabel="MotionLink" translation="" />
	<label commandName="FeatureMove" devLabel="Move" translation="" />
	<label commandName="FeatureMoveBody" devLabel="MoveBody" translation="" />
	<label commandName="FeatureOffsetFaces" devLabel="OffsetFaces" translation="" />
	<label commandName="FeaturePCB" devLabel="PCB" translation="" />
	<label commandName="FeaturePCBExtrude" devLabel="PCBExtrude" translation="" />
	<label commandName="FeaturePCBHole" devLabel="PCBHole" translation="" />
	<label commandName="FeaturePathComponentPattern" devLabel="PathPattern" translation="" />
	<label commandName="FeaturePathPattern" devLabel="PathPattern" translation="" />
	<label commandName="FeaturePin" devLabel="Pin" translation="" />
	<label commandName="FeaturePipe" devLabel="Pipe" translation="" />
	<label commandName="FeatureRectangularComponentPattern" devLabel="R-Pattern" translation="" />
	<label commandName="FeatureRectangularPattern" devLabel="R-Pattern" translation="" />
	<label commandName="FeatureRemoveFaces" devLabel="RemoveFaces" translation="" />
	<label commandName="FeatureRemoveFeatures" devLabel="RemoveFeatures" translation="" />
	<label commandName="FeatureReparentDecal" devLabel="ReparentDecal" translation="" />
	<label commandName="FeatureReplaceFace" devLabel="ReplaceFace" translation="" />
	<label commandName="FeatureRest" devLabel="Rest" translation="" />
	<label commandName="FeatureRevolve" devLabel="Revolve" translation="" />
	<label commandName="FeatureRib" devLabel="Rib" translation="" />
	<label commandName="FeatureSMBaseFace" devLabel="BaseFlange" translation="" />
	<label commandName="FeatureSMContourFlange" devLabel="ContourFlange" translation="" />
	<label commandName="FeatureSMEdgeFlange" devLabel="EdgeFlange" translation="" />
	<label commandName="FeatureSMHemFlange" devLabel="Hem" translation="" />
	<label commandName="FeatureSMLoftedFlange" devLabel="LoftedFlange" translation="" />
	<label commandName="FeatureScale" devLabel="Scale" translation="" />
	<label commandName="FeatureSelectionPluralId" devLabel="Features" translation="" />
	<label commandName="FeatureSheetMetalFlatPattern" devLabel="FlatPattern" translation="" />
	<label commandName="FeatureSheetMetalFlatPatternAlign" devLabel="FlatPatternAlign" translation="" />
	<label commandName="FeatureSheetMetalRip" devLabel="Rip" translation="" />
	<label commandName="FeatureSheetmetalRefold" devLabel="Refold" translation="" />
	<label commandName="FeatureSheetmetalSheetMetalBend" devLabel="Bend" translation="" />
	<label commandName="FeatureSheetmetalUnfold" devLabel="Unfold" translation="" />
	<label commandName="FeatureShell" devLabel="Shell" translation="" />
	<label commandName="FeatureSilhouetteSplit" devLabel="SilhouetteSplit" translation="" />
	<label commandName="FeatureSketch" devLabel="Sketch" translation="" />
	<label commandName="FeatureSnapFit" devLabel="SnapFit" translation="" />
	<label commandName="FeatureSnapshot" devLabel="Position" translation="" />
	<label commandName="FeatureSpherePrimitive" devLabel="SpherePrimitive" translation="" />
	<label commandName="FeatureSplit" devLabel="Split" translation="" />
	<label commandName="FeatureSplitFace" devLabel="SplitFace" translation="" />
	<label commandName="FeatureSurfaceDeleteFace" devLabel="SurfaceDeleteFace" translation="" />
	<label commandName="FeatureSurfaceExtend" devLabel="SurfaceExtend" translation="" />
	<label commandName="FeatureSurfaceGapFill" devLabel="Gap Fill" translation="" />
	<label commandName="FeatureSurfaceOffset" devLabel="SurfaceOffset" translation="" />
	<label commandName="FeatureSurfacePatch" devLabel="SurfacePatch" translation="" />
	<label commandName="FeatureSurfaceRuled" devLabel="SurfaceRuled" translation="" />
	<label commandName="FeatureSurfaceStitch" devLabel="SurfaceStitch" translation="" />
	<label commandName="FeatureSurfaceTrim" devLabel="SurfaceTrim" translation="" />
	<label commandName="FeatureSurfaceUntrim" devLabel="SurfaceUntrim" translation="" />
	<label commandName="FeatureSweep" devLabel="Sweep" translation="" />
	<label commandName="FeatureThicken" devLabel="Thicken" translation="" />
	<label commandName="FeatureThread" devLabel="Thread" translation="" />
	<label commandName="FeatureTorusPrimitive" devLabel="TorusPrimitive" translation="" />
	<label commandName="FeatureUnStitch" devLabel="UnStitch" translation="" />
	<label commandName="FeatureUnpin" devLabel="Unpin" translation="" />
	<label commandName="FeatureWeb" devLabel="Web" translation="" />
	<label commandName="FeatureWorkAxis" devLabel="WorkAxis" translation="" />
	<label commandName="FeatureWorkPlane" devLabel="WorkPlane" translation="" />
	<label commandName="FeatureWorkPoint" devLabel="WorkPoint" translation="" />
	<label commandName="FeatureXRef" devLabel="Component Insert" translation="" />
	<label commandName="Feature_Compute_Error" devLabel="Compute Failed" translation="" />
	<label commandName="Feature_Compute_Warning" devLabel="Compute Warning" translation="" />
	<label commandName="Feature_Input_Compute_Error" devLabel="Reference Failures" translation="" />
	<label commandName="FileMissingError" devLabel="The associated file is missing, it could be deleted." translation="" />
	<label commandName="File_Name" devLabel="File Name" translation="" />
	<label commandName="FilletChordRadius" devLabel="Radius" translation="" />
	<label commandName="FilletConstantRadius" devLabel="Radius" translation="" />
	<label commandName="FilletEdgeNoBodiesError" devLabel="There are no bodies specified to fillet." translation="" />
	<label commandName="FilletEdgeOffset1" devLabel="EdgeOffset1" translation="" />
	<label commandName="FilletEdgeOffset2" devLabel="EdgeOffset2" translation="" />
	<label commandName="FilletEdgeSplitError" devLabel="There was a problem accepting the sequences of edges to fillet. Try turning the Tangent Chain option off and splitting the edge sequences into shorter Selection Edge Sets." translation="" />
	<label commandName="FilletEdgeTangencyWeightError" devLabel="The tangency weight is outside the range %1% to %2%." translation="" />
	<label commandName="FilletFeatureName" devLabel="Fillet" translation="" />
	<label commandName="FilletHelpPointError" devLabel="Cannot create fillet from selected faces.&#10;    Select faces that are adjacent to the center faces." translation="" />
	<label commandName="FilletRadius" devLabel="Radius" translation="" />
	<label commandName="FilletTangencyWeight" devLabel="Tangency Weight" translation="" />
	<label commandName="FixupWMAndConfigMissingLink" devLabel="Models linked to the active configuration" translation="" />
	<label commandName="FlangeAngleConfigParam" devLabel="Angle" translation="" />
	<label commandName="FlangeEdgeWidthConfig" devLabel="Edge %1% " translation="" />
	<label commandName="FlangeFeatureName" devLabel="Flange" translation="" />
	<label commandName="FlangeHeightConfigParam" devLabel="Height" translation="" />
	<label commandName="FlatHeadMachineScrew" devLabel="Flat Head Machine Screw" translation="" />
	<label commandName="FlatHeadMachineScrew(100)" devLabel="Flat Head Machine Screw (100)" translation="" />
	<label commandName="FlatHeadMachineScrew(82)" devLabel="Flat Head Machine Screw (82)" translation="" />
	<label commandName="FlatPattern" devLabel="Flat Pattern" translation="" />
	<label commandName="FlatPatternActivateCommandTooltip" devLabel="Activate Flat Pattern" translation="" />
	<label commandName="FlatPatternChangeSheetMetalDataCommandTooltip" devLabel="Selecting a different rule in the flat pattern is not supported." translation="" />
	<label commandName="FlatPatternUpdateErrorTooltip" devLabel="Errors in Flat Pattern" translation="" />
	<label commandName="FlatPatternUpdateInvalidAsset" devLabel="Invalid source Flat Pattern asset found during Flat Pattern update operation." translation="" />
	<label commandName="FlatPatternUpdateNULLAsset" devLabel="Could not find the flat pattern asset during Flat Pattern update operation." translation="" />
	<label commandName="FlatPatternUpdateNULLDocument" devLabel="Document is missing during Flat Pattern update operation." translation="" />
	<label commandName="FlatPatternUpdateNULLSourceComponent" devLabel="Base component is not available during Flat Pattern update operation." translation="" />
	<label commandName="FlatPatternUpdateNULLWorkingComponent" devLabel="Flat Pattern component is not available during Flat Pattern update operation." translation="" />
	<label commandName="Flat_Hex_Thread_Forming_Coarse_Inch_Screw" devLabel="Flat Hex Thread Forming Coarse Inch Screw" translation="" />
	<label commandName="Flat_Hex_Thread_Forming_Coarse_Screw" devLabel="Flat Hex Thread Forming Coarse Screw" translation="" />
	<label commandName="Flat_Hex_Thread_Forming_Fine_Inch_Screw" devLabel="Flat Hex Thread Forming Fine Inch Screw" translation="" />
	<label commandName="Flat_Hex_Thread_Forming_Fine_Screw" devLabel="Flat Hex Thread Forming Fine Screw" translation="" />
	<label commandName="Flat_Phillips_Thread_Forming_Coarse_Inch_Screw" devLabel="Flat Phillips Thread Forming Coarse Inch Screw" translation="" />
	<label commandName="Flat_Phillips_Thread_Forming_Coarse_Screw" devLabel="Flat Phillips Thread Forming Coarse Screw" translation="" />
	<label commandName="Flat_Phillips_Thread_Forming_Fine_Inch_Screw" devLabel="Flat Phillips Thread Forming Fine Inch Screw" translation="" />
	<label commandName="Flat_Phillips_Thread_Forming_Fine_Screw" devLabel="Flat Phillips Thread Forming Fine Screw" translation="" />
	<label commandName="Flat_Pozidriv_Thread_Forming_Coarse_Inch_Screw" devLabel="Flat Pozidriv Thread Forming Coarse Inch Screw" translation="" />
	<label commandName="Flat_Pozidriv_Thread_Forming_Coarse_Screw" devLabel="Flat Pozidriv Thread Forming Coarse Screw" translation="" />
	<label commandName="Flat_Pozidriv_Thread_Forming_Fine_Inch_Screw" devLabel="Flat Pozidriv Thread Forming Fine Inch Screw" translation="" />
	<label commandName="Flat_Pozidriv_Thread_Forming_Fine_Screw" devLabel="Flat Pozidriv Thread Forming Fine Screw" translation="" />
	<label commandName="Flat_Security_Torx_Plus_Thread_Forming_Coarse_Inch_Screw" devLabel="Flat Security Torx Plus Thread Forming Coarse Inch Screw" translation="" />
	<label commandName="Flat_Security_Torx_Plus_Thread_Forming_Coarse_Screw" devLabel="Flat Security Torx Plus Thread Forming Coarse Screw" translation="" />
	<label commandName="Flat_Security_Torx_Plus_Thread_Forming_Fine_Inch_Screw" devLabel="Flat Security Torx Plus Thread Forming Fine Inch Screw" translation="" />
	<label commandName="Flat_Security_Torx_Plus_Thread_Forming_Fine_Screw" devLabel="Flat Security Torx Plus Thread Forming Fine Screw" translation="" />
	<label commandName="Flat_Slotted+Phillips_Thread_Forming_Coarse_Inch_Screw" devLabel="Flat Slotted+Phillips Thread Forming Coarse Inch Screw" translation="" />
	<label commandName="Flat_Slotted+Phillips_Thread_Forming_Coarse_Screw" devLabel="Flat Slotted+Phillips Thread Forming Coarse Screw" translation="" />
	<label commandName="Flat_Slotted+Phillips_Thread_Forming_Fine_Inch_Screw" devLabel="Flat Slotted+Phillips Thread Forming Fine Inch Screw" translation="" />
	<label commandName="Flat_Slotted+Phillips_Thread_Forming_Fine_Screw" devLabel="Flat Slotted+Phillips Thread Forming Fine Screw" translation="" />
	<label commandName="Flat_Slotted+Pozidriv_Thread_Forming_Coarse_Inch_Screw" devLabel="Flat Slotted+Pozidriv Thread Forming Coarse Inch Screw" translation="" />
	<label commandName="Flat_Slotted+Pozidriv_Thread_Forming_Coarse_Screw" devLabel="Flat Slotted+Pozidriv Thread Forming Coarse Screw" translation="" />
	<label commandName="Flat_Slotted+Pozidriv_Thread_Forming_Fine_Inch_Screw" devLabel="Flat Slotted+Pozidriv Thread Forming Fine Inch Screw" translation="" />
	<label commandName="Flat_Slotted+Pozidriv_Thread_Forming_Fine_Screw" devLabel="Flat Slotted+Pozidriv Thread Forming Fine Screw" translation="" />
	<label commandName="Flat_Slotted+Torx_Plus_Thread_Forming_Coarse_Inch_Screw" devLabel="Flat Slotted+Torx Plus Thread Forming Coarse Inch Screw" translation="" />
	<label commandName="Flat_Slotted+Torx_Plus_Thread_Forming_Coarse_Screw" devLabel="Flat Slotted+Torx Plus Thread Forming Coarse Screw" translation="" />
	<label commandName="Flat_Slotted+Torx_Plus_Thread_Forming_Fine_Inch_Screw" devLabel="Flat Slotted+Torx Plus Thread Forming Fine Inch Screw" translation="" />
	<label commandName="Flat_Slotted+Torx_Plus_Thread_Forming_Fine_Screw" devLabel="Flat Slotted+Torx Plus Thread Forming Fine Screw" translation="" />
	<label commandName="Flat_Slotted_Thread_Forming_Coarse_Inch_Screw" devLabel="Flat Slotted Thread Forming Coarse Inch Screw" translation="" />
	<label commandName="Flat_Slotted_Thread_Forming_Coarse_Screw" devLabel="Flat Slotted Thread Forming Coarse Screw" translation="" />
	<label commandName="Flat_Slotted_Thread_Forming_Fine_Inch_Screw" devLabel="Flat Slotted Thread Forming Fine Inch Screw" translation="" />
	<label commandName="Flat_Slotted_Thread_Forming_Fine_Screw" devLabel="Flat Slotted Thread Forming Fine Screw" translation="" />
	<label commandName="Flat_Torx_Plus_Thread_Forming_Coarse_Inch_Screw" devLabel="Flat Torx Plus Thread Forming Coarse Inch Screw" translation="" />
	<label commandName="Flat_Torx_Plus_Thread_Forming_Coarse_Screw" devLabel="Flat Torx Plus Thread Forming Coarse Screw" translation="" />
	<label commandName="Flat_Torx_Plus_Thread_Forming_Fine_Inch_Screw" devLabel="Flat Torx Plus Thread Forming Fine Inch Screw" translation="" />
	<label commandName="Flat_Torx_Plus_Thread_Forming_Fine_Screw" devLabel="Flat Torx Plus Thread Forming Fine Screw" translation="" />
	<label commandName="FlatnessTooltip" devLabel="Flatness" translation="" />
	<label commandName="FlattenFailed" devLabel="Failed to flatten the given points." translation="" />
	<label commandName="FreeStateTooltip" devLabel="Free State" translation="" />
	<label commandName="FreezeFailed" devLabel="Failed to freeze selected entities." translation="" />
	<label commandName="FromParentMaterial" devLabel="From Parent" translation="" />
	<label commandName="FromPhysicalMaterial" devLabel="From Physical Material" translation="" />
	<label commandName="FrozenSurfChangedNonPreview" devLabel="The last operation unfroze a frozen region to make the requested shape change. Undo this operation to revert the shape change and restore the frozen region" translation="" />
	<label commandName="FrozenSurfChangedPreview" devLabel="This operation will need to unfreeze a frozen region to make the requested shape change." translation="" />
	<label commandName="FrozenSurfChangedSimExacNonPreview" devLabel="The last operation unfroze a frozen region to make the requested shape change. Undo this operation to revert the shape change and restore the frozen region. Change the Insertion Mode to Exact to avoid this issue." translation="" />
	<label commandName="FrozenSurfChangedSimExacPreview" devLabel="This operation will need to unfreeze a frozen region to make the requested shape change. Change the Insertion Mode to Exact to avoid this issue" translation="" />
	<label commandName="Full Round" devLabel="Full Round" translation="" />
	<label commandName="FusionActivateLocalCompCmdTooltip" devLabel="Activate Component" translation="" />
	<label commandName="FusionAddParametricJointForEditError" devLabel="Original joint occurrence could not be restored for editing" translation="" />
	<label commandName="FusionChangeActiveUnitsTooltip" devLabel="Change Active Units" translation="" />
	<label commandName="FusionChangePMISettingsTooltip" devLabel="Change PMI Settings" translation="" />
	<label commandName="FusionChangeThreadTypeTooltip" devLabel="Change Thread Type" translation="" />
	<label commandName="FusionComponentInstanceFoldername" devLabel="Model Components" translation="" />
	<label commandName="FusionComponentRootDefaultUserName" devLabel="FusionComponent" translation="" />
	<label commandName="FusionDefaultUnitsOptionsToolTip" devLabel="Preferences that sets default units used in new documents" translation="" />
	<label commandName="FusionDefaultUnitsOptionsUserName" devLabel="Design" translation="" />
	<label commandName="FusionDocDesc" devLabel="A Fusion Document" translation="" />
	<label commandName="FusionDocName" devLabel="Fusion Document" translation="" />
	<label commandName="FusionFROutputFindFeatures2NullBody" devLabel="No valid body for feature recognition" translation="" />
	<label commandName="FusionFROutputFindFeaturesNullBody" devLabel="No valid body for feature recognition" translation="" />
	<label commandName="FusionFROutputRemoveFeaturesNotFound" devLabel="Call findFeatures before removeFeatures" translation="" />
	<label commandName="FusionJointAssembleRequestErrorJointId" devLabel="Missing first joint origin associativity" translation="" />
	<label commandName="FusionJointAssembleRequestErrorMatrix3dId" devLabel="Joint could not be created with the given input." translation="" />
	<label commandName="FusionLibraryComponentInstanceFoldername" devLabel="Fasteners" translation="" />
	<label commandName="FusionRemoveFeaturesNoFeaturesRemoved" devLabel="No features were able to be removed from this part" translation="" />
	<label commandName="FusionRemoveFeaturesNoFeaturesRemoved_" devLabel="No features were able to be removed" translation="" />
	<label commandName="FusionRemoveFeaturesNotAllFeaturesRemoved" devLabel="Not all features were able to be removed from this part" translation="" />
	<label commandName="FusionRemoveFeaturesNotAllFeaturesRemoved_" devLabel="Not all features were able to be removed" translation="" />
	<label commandName="FusionSurfaceReverseNormal" devLabel="Reverse Normal" translation="" />
	<label commandName="FusionTextCommandUsedOutsideFusion" devLabel="Fusion scripting can only be used in a fusion asset" translation="" />
	<label commandName="GAPFILL_NO_TOOLBODY" devLabel="Modeling Error: Can't create toolbody for gap fill, please check the inputs." translation="" />
	<label commandName="GEOMETRY_SELECTION_REPARENTED" devLabel="All selections have become invalid because the referenced geometry has been moved to a new component.Undo the change to the geometry or re-create the annotation on the new component." translation="" />
	<label commandName="GOST" devLabel="GOST" translation="" />
	<label commandName="GTPCommandTooltip" devLabel="Edit the Ground To Parent status of %1% to update associative instances." translation="" />
	<label commandName="GTPCommandTooltipMultiComp" devLabel="Edit the Ground To Parent status of source component to update associative instances." translation="" />
	<label commandName="GTPDerivedCompError" devLabel="Derived Component instances(Working Model Clone) are not applicable for GTP" translation="" />
	<label commandName="GTPExternalDerivedTooltip" devLabel="Edit the component's Ground To Parent status in the source design." translation="" />
	<label commandName="GTPIneligibleCompError" devLabel="Component instance is not eligible for GTP" translation="" />
	<label commandName="GTPMirroredOrDerivedError" devLabel="Cannot modify ground to parent status for child components of %1% instances.&lt;br&gt;&lt;br&gt;" translation="" />
	<label commandName="GTPRootCompError" devLabel="Root component instance is not supported for GTP" translation="" />
	<label commandName="GTPStrText" devLabel="Ground To Parent &lt;b&gt;(unavailable)&lt;/b&gt;&lt;br&gt;&lt;br&gt;" translation="" />
	<label commandName="GapFillExtendNFFaces_ExtendExtensionFace" devLabel="Unable to extend the extension face." translation="" />
	<label commandName="GapFillExtendNFFaces_MakeExtensionWireBody" devLabel="Unable to copy source body of the selected edge." translation="" />
	<label commandName="GapFillExtendNFFaces_MakeFirstExtensionBody" devLabel="Unable to trim the extension face." translation="" />
	<label commandName="GapFillExtendNFFaces_MakeFirstExtensionWireBody" devLabel="Unable to create wire body from the extension face." translation="" />
	<label commandName="GapFillExtendOneFaceExtendExtensionFace" devLabel="Unable to extend the extension face." translation="" />
	<label commandName="GapFillExtendOneFaceFaceIntersection" devLabel="The extension face and the termination face have an invalid face intersection.  Please try the Loft between faces option or the Boundary Patch option." translation="" />
	<label commandName="GapFillExtendOneFaceMakeBlankBody" devLabel="Unable to trim the extension face." translation="" />
	<label commandName="GapFillExtendOneFaceMakeExtensionBody" devLabel="Unable to trim the extension face." translation="" />
	<label commandName="GapFillExtendOneFaceMakeExtensionWireBody" devLabel="Unable to extend the extension face." translation="" />
	<label commandName="GapFillExtendOneFaceMakeTerminationBody" devLabel="Unable to trim the extension face." translation="" />
	<label commandName="GapFillExtendOneFaceNoIntersection" devLabel="The extension face and the termination face do not intersect." translation="" />
	<label commandName="GapFillExtendOneFaceNoIntersectionGraph" devLabel="The extension face and the termination face have an invalid intersection.  Please try the Loft between faces option or the Boundary Patch option." translation="" />
	<label commandName="GapFillExtendOneFaceStitch" devLabel="Unable to stitch the body." translation="" />
	<label commandName="GapFillExtendOneFaceTrim" devLabel="Unable to trim the extension face." translation="" />
	<label commandName="GapFillExtendOneNFFace_ExtendEdge" devLabel="Unable to extend the selected egde." translation="" />
	<label commandName="GapFillExtendOneNFFace_ExtendFirstExtensionFace" devLabel="Unable to extend the first extension face." translation="" />
	<label commandName="GapFillExtendOneNFFace_ExtendSecondExtensionFace" devLabel="Unable to extend the first extension face." translation="" />
	<label commandName="GapFillExtendOneNFFace_FaceIntersection" devLabel="The first extension face and the second selected face have an invalid face intersection.  Please try the Loft between faces option or the Boundary Patch option." translation="" />
	<label commandName="GapFillExtendOneNFFace_FirstEdge" devLabel="The first selected edge doesn't have faces." translation="" />
	<label commandName="GapFillExtendOneNFFace_MakeExtensionBody" devLabel="Unable to trim the extension face." translation="" />
	<label commandName="GapFillExtendOneNFFace_NoIntersection" devLabel="The first extension face and the second selected face do not intersect." translation="" />
	<label commandName="GapFillExtendOneNFFace_NoIntersectionGraph" devLabel="The first extension face and the second selected face have an invalid intersection.  Please try the Loft between faces option or the Boundary Patch option." translation="" />
	<label commandName="GapFillExtendOneNFFace_Stitch" devLabel="Unable to stitch the body." translation="" />
	<label commandName="GapFillExtendOneNFFace_Trim" devLabel="Unable to trim the extension face." translation="" />
	<label commandName="GapFillExtendTwoFacesExtendFirstExtensionFace" devLabel="Unable to extend the first extension face." translation="" />
	<label commandName="GapFillExtendTwoFacesExtendFirstOrSecondExtensionFace" devLabel="Unable to extend the first extension face or second extension face." translation="" />
	<label commandName="GapFillExtendTwoFacesExtendSecondExtensionFace" devLabel="Unable to extend the second extension face." translation="" />
	<label commandName="GapFillExtendTwoFacesFaceInvalidIntersection" devLabel="The first extension face and the second extension face have an invalid face intersection.  Please try the Loft between faces option or the Boundary Patch option." translation="" />
	<label commandName="GapFillExtendTwoFacesMakeBlankBody" devLabel="Unable to trim the first extension face or the second extension face." translation="" />
	<label commandName="GapFillExtendTwoFacesMakeFirstExtensionBody" devLabel="Unable to trim the first extension face." translation="" />
	<label commandName="GapFillExtendTwoFacesMakeSecondExtensionBody" devLabel="Unable to trim the second extension face." translation="" />
	<label commandName="GapFillExtendTwoFacesMakeSecondExtensionWireBody" devLabel="Unable to extend the second extension face." translation="" />
	<label commandName="GapFillExtendTwoFacesNoIntersection" devLabel="The first extension face and the second extension face do not intersect." translation="" />
	<label commandName="GapFillExtendTwoFacesNoIntersectionGraph" devLabel="The first extension face and the second extension face have an invalid intersection.  Please try the Loft between faces option or the Boundary Patch option." translation="" />
	<label commandName="GapFillExtendTwoFacesStitch" devLabel="Unable to stitch the body." translation="" />
	<label commandName="GapFillExtendTwoFacesTrim" devLabel="Unable to trim the first extension face or the second extension face." translation="" />
	<label commandName="GapFillExtendTwoFacescoplanarFaces" devLabel="Unable to trim coplanar faces. Please try the Loft between faces option or the Extend one face option." translation="" />
	<label commandName="GapFillExtendTwoNFFaces_ExtendEdges" devLabel="Unable to extend the selected egdes." translation="" />
	<label commandName="GapFillExtendTwoNFFaces_ExtendFirstExtensionFace" devLabel="Unable to extend the first extension face." translation="" />
	<label commandName="GapFillExtendTwoNFFaces_ExtendSecondExtensionFace" devLabel="Unable to extend the second extension face." translation="" />
	<label commandName="GapFillExtendTwoNFFaces_FaceIntersection1" devLabel="The first extension face and the second extension face have an invalid face intersection.  Please try the Loft between faces option or the Boundary Patch option." translation="" />
	<label commandName="GapFillExtendTwoNFFaces_FaceIntersection2" devLabel="The first extension face and the second extension face don't have an intersection. Please try the Loft between faces option or the Boundary Patch option." translation="" />
	<label commandName="GapFillExtendTwoNFFaces_FaceIntersection2_MAC" devLabel="The first extension face and the second extension face don't have an intersection.&#10;Please try the Loft between faces option&#10;or the Boundary Patch option." translation="" />
	<label commandName="GapFillExtendTwoNFFaces_FirstEdge" devLabel="The first selected edge doesn't have faces." translation="" />
	<label commandName="GapFillExtendTwoNFFaces_MakeFirstExtensionBody" devLabel="Unable to trim the first extension face." translation="" />
	<label commandName="GapFillExtendTwoNFFaces_MakeSecondExtensionBody" devLabel="Unable to trim the second extension face." translation="" />
	<label commandName="GapFillExtendTwoNFFaces_NoIntersection" devLabel="The first extension face and the second extension face do not intersect." translation="" />
	<label commandName="GapFillExtendTwoNFFaces_NoIntersectionGraph" devLabel="The first extension face and the second extension face have an invalid intersection.  Please try the Loft between faces option or the Boundary Patch option." translation="" />
	<label commandName="GapFillExtendTwoNFFaces_SecondEdge" devLabel="The second selected edge doesn't have faces." translation="" />
	<label commandName="GapFillExtendTwoNFFaces_Stitch" devLabel="Unable to stitch the body." translation="" />
	<label commandName="GapFillExtendTwoNFFaces_Trim" devLabel="Unable to trim the first extension face or the second extension face." translation="" />
	<label commandName="GapFillLoftBetweenFacesLoft" devLabel="Unable to loft between the profiles." translation="" />
	<label commandName="GapFillLoftBetweenFacesStitch" devLabel="Unable to stitch the body." translation="" />
	<label commandName="GeneralUnitsValue0" devLabel="mm" translation="" />
	<label commandName="GeneralUnitsValue1" devLabel="cm" translation="" />
	<label commandName="GeneralUnitsValue2" devLabel="m" translation="" />
	<label commandName="GeneralUnitsValue3" devLabel="in" translation="" />
	<label commandName="GeneralUnitsValue4" devLabel="ft" translation="" />
	<label commandName="GeneralUnitsValue5" devLabel="Custom" translation="" />
	<label commandName="GeneralUnitsValueLong0" devLabel="millimeter" translation="" />
	<label commandName="GeneralUnitsValueLong1" devLabel="centimeter" translation="" />
	<label commandName="GeneralUnitsValueLong2" devLabel="meter" translation="" />
	<label commandName="GeneralUnitsValueLong3" devLabel="inch" translation="" />
	<label commandName="GeneralUnitsValueLong4" devLabel="foot" translation="" />
	<label commandName="GenerateConfigAdmin" devLabel="&#10;Contact Administrator to request Editor access." translation="" />
	<label commandName="GenerateConfigAdminName" devLabel="&#10;Contact Administrator %1% to request Editor access." translation="" />
	<label commandName="GenerateConfigCancelled" devLabel="Command cancelled" translation="" />
	<label commandName="GenerateConfigDataMissing" devLabel="Configuration data is missing." translation="" />
	<label commandName="GenerateConfigGenerateFailed" devLabel="Failed to generate new Configuration document." translation="" />
	<label commandName="GenerateConfigMemberFailed" devLabel="Failed to generate Configuration document with path:%1% from Configured Design at path:%2%" translation="" />
	<label commandName="GenerateConfigMissingCDVersion" devLabel="Cannot get Configured Design version needed to generate Configuration" translation="" />
	<label commandName="GenerateConfigMissingCDVersion_ccy" devLabel="Cannot get the configured design change needed to generate a configuration" translation="" />
	<label commandName="GenerateConfigMissingConfigVersion" devLabel="Configuration version for Configured Design was not found." translation="" />
	<label commandName="GenerateConfigMissingConfigVersion_ccy" devLabel="Configuration change for configured design was not found." translation="" />
	<label commandName="GenerateConfigMissingInfo" devLabel="Missing information needed to get Configuration." translation="" />
	<label commandName="GenerateConfigPCSJobFailed" devLabel="Configuration data creation failed." translation="" />
	<label commandName="GenerateConfigPCSQueryFailed" devLabel="Error checking for Configuration data." translation="" />
	<label commandName="GenerateConfigRestricted" devLabel="Cannot reference Configuration version of Configured Design %1% for the first time without Editor access." translation="" />
	<label commandName="GenerateMissingConfiguration" devLabel="Configuration document not found" translation="" />
	<label commandName="GenerateTableFetchFail" devLabel="Configured Design is missing table" translation="" />
	<label commandName="Generative" devLabel="Generative Design workspace" translation="" />
	<label commandName="GenerativeModels" devLabel="Generative Models" translation="" />
	<label commandName="GenerativeWM" devLabel="Generative" translation="" />
	<label commandName="GenericModelingError" devLabel="Modeling operation failed." translation="" />
	<label commandName="GeomRelationConstraintAngle" devLabel="Angle" translation="" />
	<label commandName="GeomRelationConstraintOffset" devLabel="Offset" translation="" />
	<label commandName="GeometricRelationshipUpdateError" devLabel="Geometry used to define Constraint is missing" translation="" />
	<label commandName="GeometricRelationshipUpdateNeeded" devLabel="Update of Constraint's geometry needed after geometry change" translation="" />
	<label commandName="GeometryPointMissing" devLabel="Some referenced point cannot be found." translation="" />
	<label commandName="GetCloudFileForConfiguration" devLabel="Couldn't find the cloud file associated with path: %1%" translation="" />
	<label commandName="GetConfiguredDesignForConfiguration" devLabel="Configured Design was not found in cache and Configured Design version Uri is empty for Configuration at path:%1%" translation="" />
	<label commandName="GetLatestCmdCancelled" devLabel="%1% is canceled" translation="" />
	<label commandName="GetLatestCmdEmptyLinkToSourceDoc" devLabel="Cannot find source document %1%" translation="" />
	<label commandName="GetNormalFailed1" devLabel="Failed to get the normal due to get more faces from the edge" translation="" />
	<label commandName="GetNormalFailed2" devLabel="Failed to get the normal due to the edges are not co-planar" translation="" />
	<label commandName="HDIA_MISSING" devLabel="Diameter property missing." translation="" />
	<label commandName="HDIA_PROPERTY_MISMATCH" devLabel="The Diameter property is not valid. Please update the text or the Diameter." translation="" />
	<label commandName="HDIA_TOLERANCE_INVALID" devLabel="Invalid Diameter tolerances" translation="" />
	<label commandName="HDPT_PROPERTY_MISMATCH" devLabel="The Depth property is not valid. Please update the text or the Depth." translation="" />
	<label commandName="HDPT_TOLERANCE_INVALID" devLabel="Invalid Depth tolerances." translation="" />
	<label commandName="HDPT_ZERO" devLabel="Depth is present but zero." translation="" />
	<label commandName="HOLE_CANNOT_CREATE_TOOLBODY" devLabel="Can't create hole toolbody, please check inputs." translation="" />
	<label commandName="HOLE_CBORE_DEPTH_ERROR" devLabel="Cannot create hole because the Counterbore Diameter is the same or smaller than the Hole Diameter.&#10;Adjust the Counterbore Diameter value, so it is larger than the Hole Diameter. " translation="" />
	<label commandName="HOLE_CSUNK_DEPTH_ERROR" devLabel="Cannot create hole because the Countersink Diameter is the same or smaller than the Hole Diameter.&#10;Adjust the Countersink value, so it is larger than the Hole Diameter. " translation="" />
	<label commandName="HOLE_DEPTH_ERR_TAPERED_THREAD" devLabel="Hole depth is less than standard taper thread height." translation="" />
	<label commandName="HOLE_END_FACE_LOST" devLabel="End face is lost" translation="" />
	<label commandName="HOLE_MISSING_CENTERS" devLabel="Missing hole centers, please check inputs" translation="" />
	<label commandName="HOLE_SELECTION_LOST" devLabel="Some selections have become invalid. It is likely that the selection is missing. Please update the selections and select only identical holes or bosses." translation="" />
	<label commandName="Head_Angle" devLabel="Head Angle" translation="" />
	<label commandName="Head_Diameter" devLabel="Head Diameter" translation="" />
	<label commandName="Head_Height" devLabel="Head Height" translation="" />
	<label commandName="Head_Type" devLabel="Head Type" translation="" />
	<label commandName="HexHeadBolt" devLabel="Hex Head Bolt" translation="" />
	<label commandName="HexHeadBolt/Nut(EnlargedWasher)GOST12876-67" devLabel="Hex Head Bolt / Nut (Enlarged Washer) GOST 12876-67" translation="" />
	<label commandName="HexHeadBolt/Nut(ReducedSize)GOST12876-67" devLabel="Hex Head Bolt / Nut (Reduced Size) GOST 12876-67" translation="" />
	<label commandName="HexHeadBolt/NutGOST12876-67" devLabel="Hex Head Bolt / Nut GOST 12876-67" translation="" />
	<label commandName="HexHeadCapScrew" devLabel="Hex Head Cap Screw" translation="" />
	<label commandName="HexHeadCapScrewDINEN4014(Spotface)" devLabel="Hex Head Cap Screw DIN EN 4014 (Spotface)" translation="" />
	<label commandName="HexHeadCapScrewDINEN4017" devLabel="Hex Head Cap Screw DIN EN 4017" translation="" />
	<label commandName="HexHeadCapScrewISO4014(Spotface)" devLabel="Hex Head Cap Screw ISO 4014 (Spotface)" translation="" />
	<label commandName="HexHeadCapScrewISO4017" devLabel="Hex Head Cap Screw ISO 4017" translation="" />
	<label commandName="HexHeadMachineScrew" devLabel="Hex Head Machine Screw" translation="" />
	<label commandName="HexHeadScrew" devLabel="Hex Head Screw" translation="" />
	<label commandName="HexMachineScrew" devLabel="Hex Machine Screw" translation="" />
	<label commandName="HexSocketHeadCapScrew" devLabel="Hex Socket Head Cap Screw" translation="" />
	<label commandName="Hex_No_Slot_Thread_Forming_Coarse_Inch_Screw" devLabel="Hex No Slot Thread Forming Coarse Inch Screw" translation="" />
	<label commandName="Hex_No_Slot_Thread_Forming_Coarse_Screw" devLabel="Hex No Slot Thread Forming Coarse Screw" translation="" />
	<label commandName="Hex_No_Slot_Thread_Forming_Fine_Inch_Screw" devLabel="Hex No Slot Thread Forming Fine Inch Screw" translation="" />
	<label commandName="Hex_No_Slot_Thread_Forming_Fine_Screw" devLabel="Hex No Slot Thread Forming Fine Screw" translation="" />
	<label commandName="Hex_Phillips_Thread_Forming_Coarse_Inch_Screw" devLabel="Hex Phillips Thread Forming Coarse Inch Screw" translation="" />
	<label commandName="Hex_Phillips_Thread_Forming_Coarse_Screw" devLabel="Hex Phillips Thread Forming Coarse Screw" translation="" />
	<label commandName="Hex_Phillips_Thread_Forming_Fine_Inch_Screw" devLabel="Hex Phillips Thread Forming Fine Inch Screw" translation="" />
	<label commandName="Hex_Phillips_Thread_Forming_Fine_Screw" devLabel="Hex Phillips Thread Forming Fine Screw" translation="" />
	<label commandName="Hex_Pozidriv_Thread_Forming_Coarse_Inch_Screw" devLabel="Hex Pozidriv Thread Forming Coarse Inch Screw" translation="" />
	<label commandName="Hex_Pozidriv_Thread_Forming_Coarse_Screw" devLabel="Hex Pozidriv Thread Forming Coarse Screw" translation="" />
	<label commandName="Hex_Pozidriv_Thread_Forming_Fine_Inch_Screw" devLabel="Hex Pozidriv Thread Forming Fine Inch Screw" translation="" />
	<label commandName="Hex_Pozidriv_Thread_Forming_Fine_Screw" devLabel="Hex Pozidriv Thread Forming Fine Screw" translation="" />
	<label commandName="Hex_Slotted_Thread_Forming_Coarse_Inch_Screw" devLabel="Hex Slotted Thread Forming Coarse Inch Screw" translation="" />
	<label commandName="Hex_Slotted_Thread_Forming_Coarse_Screw" devLabel="Hex Slotted Thread Forming Coarse Screw" translation="" />
	<label commandName="Hex_Slotted_Thread_Forming_Fine_Inch_Screw" devLabel="Hex Slotted Thread Forming Fine Inch Screw" translation="" />
	<label commandName="Hex_Slotted_Thread_Forming_Fine_Screw" devLabel="Hex Slotted Thread Forming Fine Screw" translation="" />
	<label commandName="Hex_Torx_Plus_Thread_Forming_Coarse_Inch_Screw" devLabel="Hex Torx Plus Thread Forming Coarse Inch Screw" translation="" />
	<label commandName="Hex_Torx_Plus_Thread_Forming_Coarse_Screw" devLabel="Hex Torx Plus Thread Forming Coarse Screw" translation="" />
	<label commandName="Hex_Torx_Plus_Thread_Forming_Fine_Inch_Screw" devLabel="Hex Torx Plus Thread Forming Fine Inch Screw" translation="" />
	<label commandName="Hex_Torx_Plus_Thread_Forming_Fine_Screw" devLabel="Hex Torx Plus Thread Forming Fine Screw" translation="" />
	<label commandName="Hex_Washer_No_Slot_Thread_Forming_Coarse_Inch_Screw" devLabel="Hex Washer No Slot Thread Forming Coarse Inch Screw" translation="" />
	<label commandName="Hex_Washer_No_Slot_Thread_Forming_Coarse_Screw" devLabel="Hex Washer No Slot Thread Forming Coarse Screw" translation="" />
	<label commandName="Hex_Washer_No_Slot_Thread_Forming_Fine_Inch_Screw" devLabel="Hex Washer No Slot Thread Forming Fine Inch Screw" translation="" />
	<label commandName="Hex_Washer_No_Slot_Thread_Forming_Fine_Screw" devLabel="Hex Washer No Slot Thread Forming Fine Screw" translation="" />
	<label commandName="Hex_Washer_Phillips_Thread_Forming_Coarse_Inch_Screw" devLabel="Hex Washer Phillips Thread Forming Coarse Inch Screw" translation="" />
	<label commandName="Hex_Washer_Phillips_Thread_Forming_Coarse_Screw" devLabel="Hex Washer Phillips Thread Forming Coarse Screw" translation="" />
	<label commandName="Hex_Washer_Phillips_Thread_Forming_Fine_Inch_Screw" devLabel="Hex Washer Phillips Thread Forming Fine Inch Screw" translation="" />
	<label commandName="Hex_Washer_Phillips_Thread_Forming_Fine_Screw" devLabel="Hex Washer Phillips Thread Forming Fine Screw" translation="" />
	<label commandName="Hex_Washer_Pozidriv_Thread_Forming_Coarse_Inch_Screw" devLabel="Hex Washer Pozidriv Thread Forming Coarse Inch Screw" translation="" />
	<label commandName="Hex_Washer_Pozidriv_Thread_Forming_Coarse_Screw" devLabel="Hex Washer Pozidriv Thread Forming Coarse Screw" translation="" />
	<label commandName="Hex_Washer_Pozidriv_Thread_Forming_Fine_Inch_Screw" devLabel="Hex Washer Pozidriv Thread Forming Fine Inch Screw" translation="" />
	<label commandName="Hex_Washer_Pozidriv_Thread_Forming_Fine_Screw" devLabel="Hex Washer Pozidriv Thread Forming Fine Screw" translation="" />
	<label commandName="Hex_Washer_Slotted_Thread_Forming_Coarse_Inch_Screw" devLabel="Hex Washer Slotted Thread Forming Coarse Inch Screw" translation="" />
	<label commandName="Hex_Washer_Slotted_Thread_Forming_Coarse_Screw" devLabel="Hex Washer Slotted Thread Forming Coarse Screw" translation="" />
	<label commandName="Hex_Washer_Slotted_Thread_Forming_Fine_Inch_Screw" devLabel="Hex Washer Slotted Thread Forming Fine Inch Screw" translation="" />
	<label commandName="Hex_Washer_Slotted_Thread_Forming_Fine_Screw" devLabel="Hex Washer Slotted Thread Forming Fine Screw" translation="" />
	<label commandName="Hex_Washer_Torx_Plus_Thread_Forming_Coarse_Inch_Screw" devLabel="Hex Washer Torx Plus Thread Forming Coarse Inch Screw" translation="" />
	<label commandName="Hex_Washer_Torx_Plus_Thread_Forming_Coarse_Screw" devLabel="Hex Washer Torx Plus Thread Forming Coarse Screw" translation="" />
	<label commandName="Hex_Washer_Torx_Plus_Thread_Forming_Fine_Inch_Screw" devLabel="Hex Washer Torx Plus Thread Forming Fine Inch Screw" translation="" />
	<label commandName="Hex_Washer_Torx_Plus_Thread_Forming_Fine_Screw" devLabel="Hex Washer Torx Plus Thread Forming Fine Screw" translation="" />
	<label commandName="Hole" devLabel="No target component." translation="" />
	<label commandName="HoleDepth" devLabel="Depth" translation="" />
	<label commandName="HoleDiameter" devLabel="Diameter" translation="" />
	<label commandName="HoleFastenerSettings" devLabel="Fastener Settings" translation="" />
	<label commandName="HoleFeatureName" devLabel="Hole" translation="" />
	<label commandName="HoleFeatureReferences" devLabel="References" translation="" />
	<label commandName="HoleFeatureShapeSettings" devLabel="Shape Settings" translation="" />
	<label commandName="HoleThreadNoteOutdatedError" devLabel="The hole thread note may have failed to compute, or the associated geometry has changed. " translation="" />
	<label commandName="HoleThreadNote_Compute_Warning" devLabel="Annotated Geometry Changed" translation="" />
	<label commandName="HoleThreadNote_Multiple_Notes_On_Hole" devLabel="Multiple Hole Notes defined for hole/boss" translation="" />
	<label commandName="HoleThreadNote_Selection_Lost" devLabel="Selected Geometry Lost" translation="" />
	<label commandName="HoleToolBodyCreationReferenceError" devLabel="Referenced Edge is not parallel to the hole origin plane." translation="" />
	<label commandName="IDENTICAL_TARGET_AND_TOOL_BODY" devLabel="One tool body is used as the target body for combine." translation="" />
	<label commandName="INFERRED_JOINT_INFERENCEFAIL" devLabel="Failed to compute joint type correctly. Please edit or recreate the feature." translation="" />
	<label commandName="INVALID_3BENDCORNERRELIEF_RADIUS" devLabel="In the 3-Bend Corner Override for the flange, the Relief Radius value is invalid.&#10;Adjust the Relief Radius value, or uncheck the override to restore the value from the Sheet Metal Rule." translation="" />
	<label commandName="INVALID_BENDRELIEF_DEPTH" devLabel="In the Bend Relief Override for the flange, the Relief Depth value is invalid.&#10;Adjust the Relief Depth value, or uncheck the override to restore the value from the Sheet Metal Rule." translation="" />
	<label commandName="INVALID_BENDRELIEF_REMNANT" devLabel="In the Bend Relief Override for the flange, the Relief Remnant value is invalid.&#10;Adjust the Relief Remnant value, or uncheck the override to restore the value from the Sheet Metal Rule." translation="" />
	<label commandName="INVALID_BENDRELIEF_WIDTH" devLabel="In the Bend Relief Override for the flange, the Relief Width value is invalid.&#10;Adjust the Relief Width value, or uncheck the override to restore the value from the Sheet Metal Rule." translation="" />
	<label commandName="INVALID_BEND_LINE_POSITION" devLabel="Unexpected bend parameters encountered. Please use Edit Feature to verify all values." translation="" />
	<label commandName="INVALID_BEND_RADIUS" devLabel="In the Bend Override for the flange, the Bend Radius value is invalid.&#10;Adjust the Bend Radius value, or uncheck the override to restore the value from the Sheet Metal Rule." translation="" />
	<label commandName="INVALID_COMPONENT_SELECTION" devLabel="The selected geometry is invalid, PMI cannot reference geometry from a different component. Please update the selections." translation="" />
	<label commandName="INVALID_CONICCURVE_RHO_INPUT" devLabel="Invalid Input. Rho value for a conic curve must be between 0 and 1" translation="" />
	<label commandName="INVALID_CORNERRELIEF_SIZE" devLabel="In the 2-Bend Corner Override for the flange, the Relief Size value is invalid.&#10;Adjust the Relief Size value, or uncheck the override to restore the value from the Sheet Metal Rule." translation="" />
	<label commandName="INVALID_FLIP_NORMAL" devLabel="Inverting the hole normal is only supported for complex hole segments." translation="" />
	<label commandName="INVALID_ISOCURVE_DISTANCE" devLabel="Distance is out of range. Enter a value within the face limits." translation="" />
	<label commandName="INVALID_ISOCURVE_QUANTITY" devLabel="Quantity is out of range. Enter a value smaller than defined in the Parameters dialog." translation="" />
	<label commandName="INVALID_LEADER_LINE_EXTENSION" devLabel="The leader line extension has an invalid value." translation="" />
	<label commandName="INVALID_LOFTED_FLANGE_INPUTS" devLabel="One or more lofted flange profiles are missing. Edit the Flange feature to reselect missing profiles." translation="" />
	<label commandName="INVALID_OPERAND" devLabel="Operand missing or invalid" translation="" />
	<label commandName="INVALID_OPERANTS" devLabel="Invalid operands" translation="" />
	<label commandName="INVALID_PARAMETER_NEGATIVE_NUMBER" devLabel="This input doesn't accept negative values. Enter a positive number or 0." translation="" />
	<label commandName="INVALID_PARAMETER_NEGATIVE_NUMBER_AND_ZERO" devLabel="This input doesn't accept negative values and 0. Enter a positive number." translation="" />
	<label commandName="INVALID_PARAMETER_NEGATIVE_NUMBER_ZERO_AND_NEGATIVE" devLabel="Arrange not created because the quantity isn’t valid. The quantity can't be zero, negative, or a decimal. Enter a whole, positive number." translation="" />
	<label commandName="INVALID_PARTINGLINE_BODY" devLabel="No target body or more than one target body!" translation="" />
	<label commandName="INVALID_PASTE_INSTANCE" devLabel="The instance is invalid to be Cut &amp; Pasted into target component." translation="" />
	<label commandName="INVALID_ROUND_BENDRELIEF_DEPTH" devLabel="In the Bend Relief Override for the flange, the Relief Depth value is invalid. Adjust the Relief Depth value so that it is greater than or equal to 1 / 2 of the Relief Width value, or uncheck the override to restore the value from the Sheet Metal Rule." translation="" />
	<label commandName="INVALID_SHOW_IMPORTED_GEOMETRY" devLabel="PMI has no imported geometry, imported geometry cannot be shown." translation="" />
	<label commandName="INVALID_SKPATTERN_INPUT" devLabel="Invalid Input. Please check: count is larger than 0 and angle is between -2*PI to 2*PI, and count should be 1 if distance is 0.0" translation="" />
	<label commandName="INVALID_SOURCE_BODY" devLabel="No valid source Body found, cache will be used" translation="" />
	<label commandName="INVALID_SOURCE_BODY2" devLabel="more than one bodies are selected in editing!" translation="" />
	<label commandName="INVALID_SVG" devLabel="Invalid SVG file" translation="" />
	<label commandName="INVALID_TARGET_INSTANCE" devLabel="Invalid target component instance" translation="" />
	<label commandName="INVALID_TO_OBJECT_SELECTION" devLabel="Object plane is missing. Select a different object plane to extend the flange." translation="" />
	<label commandName="ISO" devLabel="ISO" translation="" />
	<label commandName="IdealBoltLength" devLabel="Bolt length must be within the allowed range." translation="" />
	<label commandName="IllegalRestructure" devLabel="Illegal restructure. It will cause bad dependency." translation="" />
	<label commandName="ImperialUnitSystemName" devLabel="Imperial (foot, lbmass, second, Fahrenheit) units" translation="" />
	<label commandName="InchImperialUnitSystemName" devLabel="inch modeling length with imperial (foot, lbmass, second, Fahrenheit) units" translation="" />
	<label commandName="InchTappingThreadsForPlastics" devLabel="Inch Tapping Threads for Plastics" translation="" />
	<label commandName="Inch_Forming_-_Coarse" devLabel="Inch Forming - Coarse" translation="" />
	<label commandName="Inch_Forming_-_Fine" devLabel="Inch Forming - Fine" translation="" />
	<label commandName="Inches" devLabel="Inches" translation="" />
	<label commandName="IncompatibleThreadDir" devLabel="The thread directions don’t match." translation="" />
	<label commandName="IncompatibleThreadSize" devLabel="The thread sizes don’t match." translation="" />
	<label commandName="IndependentXRefInstanceRequired" devLabel="The selected instance has some essential dependent instances. Break Link is currently not supported!" translation="" />
	<label commandName="IndependentXRefsRequired" devLabel="The selected referenced component or one of its children has dependent features like Pattern associated with it. Please remove the dependent features and try again." translation="" />
	<label commandName="InheritedMaterialSuffix" devLabel=" (Inherited)" translation="" />
	<label commandName="InitializeFailed" devLabel="initialize failed" translation="" />
	<label commandName="InitializeRefdDesignAsset" devLabel="Failed to fully initialize design asset of Refd Design from path: %1% in context of assembly for update." translation="" />
	<label commandName="InsertDesignSystemLoadMsg" devLabel="Inserting of &lt;b&gt;%1%&lt;/b&gt; into &lt;b&gt;%2%&lt;/b&gt; has failed due to high system load. Please try again in a few minutes." translation="" />
	<label commandName="InsertPointFailed" devLabel="Insert Point failed to perform insertion" translation="" />
	<label commandName="InsideThickness" devLabel="Inside Thickness" translation="" />
	<label commandName="Instance_pattern_error" devLabel="Cannot find source component instance" translation="" />
	<label commandName="InterferenceComponent" devLabel="Intersections" translation="" />
	<label commandName="Intersection" devLabel="Intersection" translation="" />
	<label commandName="Invalid Face" devLabel="Some faces cannot be deleted" translation="" />
	<label commandName="InvalidAnnotation" devLabel="Invalid Annotation object." translation="" />
	<label commandName="InvalidAxisInput" devLabel="Invalid input" translation="" />
	<label commandName="InvalidBoxParameter" devLabel="Invalid parameters, placeholder can't be created. Edit the parameters." translation="" />
	<label commandName="InvalidDocumentError" devLabel="Invalid document" translation="" />
	<label commandName="InvalidOccPath" devLabel="Invalid Occurrence Path." translation="" />
	<label commandName="InvalidOccurrencePath" devLabel="Occurrence Path is not active" translation="" />
	<label commandName="InvalidOffsetSketchError" devLabel="Offset profile must be a simple (possibly closed) chain of curves." translation="" />
	<label commandName="InvalidPatternCount" devLabel="Invalid pattern quantity" translation="" />
	<label commandName="InvalidPlaneNormal" devLabel="Invalid reference plane due to some reference point is merged." translation="" />
	<label commandName="InvalidReferringDocType" devLabel="External Component can not be created in incompatible or legacy document types." translation="" />
	<label commandName="InvalidRibTool" devLabel="Invalid tool body for rib" translation="" />
	<label commandName="InvalidSketchConstraint" devLabel="Invalid sketch constraint!" translation="" />
	<label commandName="InvalidSketchDimension" devLabel="Invalid sketch dimension!" translation="" />
	<label commandName="InvalidWPntInput" devLabel="Invalid input" translation="" />
	<label commandName="InvalidWebTool" devLabel="Invalid tool body for web" translation="" />
	<label commandName="InvisibleObjectWarningMsg" devLabel="The object that you are creating is not visible. Please toggle visibility in the browser." translation="" />
	<label commandName="IsoCurveAnalysisDefaultUserName" devLabel="IsoCurve" translation="" />
	<label commandName="IsoCurveConfig" devLabel="Isoparametric Curves" translation="" />
	<label commandName="IsolateSymmetry1" devLabel="One of the T-Spline bodies selected for this operation does not contain symmetry.  That portion of the model will be highlighted and isolated from the symmetric portion of the model.  The isolated faces will be removed when symmetry is cleared." translation="" />
	<label commandName="IsolateSymmetry2" devLabel="Failed to isolate symmetry." translation="" />
	<label commandName="JIS" devLabel="JIS" translation="" />
	<label commandName="JOINT_LOST" devLabel="Motion Link joint is missing" translation="" />
	<label commandName="JOINT_LOST_ORIGIN1" devLabel="Missing joint origin 1, using cached position" translation="" />
	<label commandName="JOINT_LOST_ORIGIN2" devLabel="Missing joint origin 2, using cached position" translation="" />
	<label commandName="JOIN_BY_BEND_EDGE_REFERENCE_LOST" devLabel="The selected edge was altered, and some of the input geometry is missing.&#10;Edit Join By Bend and select new edges." translation="" />
	<label commandName="JO_ASSOCIATION_LOST" devLabel="Joint Origin geometry associations are missing" translation="" />
	<label commandName="JoinByBendComputeUtil.EdgeSelection" devLabel="Invalid edge selection for bend computation." translation="" />
	<label commandName="JoinByBendComputeUtil.InvalidBendRadius" devLabel="Invalid bend radius for bend computation." translation="" />
	<label commandName="JoinByBendComputeUtil.InvalidContext" devLabel="Invalid compute context." translation="" />
	<label commandName="JoinByBendComputeUtil.SheetMetalData" devLabel="No sheet metal data found for bend computation." translation="" />
	<label commandName="JoinByBendFeature" devLabel="Join by bend" translation="" />
	<label commandName="JointConvertError" devLabel="Joint geometry associations are missing. Joint cannot be edited" translation="" />
	<label commandName="JointFeatureAlignAngle" devLabel="Angle" translation="" />
	<label commandName="JointFeatureAlignFlip" devLabel="Flip" translation="" />
	<label commandName="JointFeatureAlignOffset" devLabel="Z Offset" translation="" />
	<label commandName="JointFeatureAlignOffsetX" devLabel="X Offset" translation="" />
	<label commandName="JointFeatureAlignOffsetY" devLabel="Y Offset" translation="" />
	<label commandName="JointFeatureMotionLimits" devLabel="Joint Motion Limits" translation="" />
	<label commandName="JointFeatureMotionMaximum" devLabel="Maximum" translation="" />
	<label commandName="JointFeatureMotionMinimum" devLabel="Minimum" translation="" />
	<label commandName="JointFeatureMotionRest" devLabel="Rest" translation="" />
	<label commandName="JointFeatureSectionAlignment" devLabel="Alignment" translation="" />
	<label commandName="JointHandleFailed" devLabel="Modification of EndType failed" translation="" />
	<label commandName="JointHomeWarning" devLabel="Joint could not be reset to Home position" translation="" />
	<label commandName="JointOriginAlignment" devLabel="Position" translation="" />
	<label commandName="JointOriginAngle" devLabel="Angle" translation="" />
	<label commandName="JointOriginConvertError" devLabel="Joint Origin geometry associations are missing. Joint Origin cannot be edited" translation="" />
	<label commandName="JointOriginFeatureCreationFailure" devLabel="Joint Origin feature creation failed." translation="" />
	<label commandName="JointOriginGlobalParamU" devLabel="Global U Parameter" translation="" />
	<label commandName="JointOriginGlobalParamV" devLabel="Global V Parameter" translation="" />
	<label commandName="JointOriginGlobalReorient0" devLabel="Global Reorientation 0" translation="" />
	<label commandName="JointOriginGlobalReorient1" devLabel="Global Reorientation 1" translation="" />
	<label commandName="JointOriginIdCloningFailed" devLabel="JointOrigin cloning failed" translation="" />
	<label commandName="JointOriginOffsetX" devLabel="Offset X" translation="" />
	<label commandName="JointOriginOffsetY" devLabel="Offset Y" translation="" />
	<label commandName="JointOriginOffsetZ" devLabel="Offset Z" translation="" />
	<label commandName="JointOriginUpdateError" devLabel="Update failed after geometry change" translation="" />
	<label commandName="JointOriginUpdateNeeded" devLabel="Update needed after geometry change" translation="" />
	<label commandName="JointSnap1" devLabel="Snap 1" translation="" />
	<label commandName="JointSnap2" devLabel="Snap 2" translation="" />
	<label commandName="JointSnapGroupName1" devLabel="Component 1" translation="" />
	<label commandName="JointSnapGroupName2" devLabel="Component 2" translation="" />
	<label commandName="JointUpdateError" devLabel="Geometry used to define Joint or Joint's Joint Origins is missing" translation="" />
	<label commandName="JointUpdateNeeded" devLabel="Update of Joint geometry needed after geometry change" translation="" />
	<label commandName="JointsHomeWarning" devLabel="One or more joints could not be reset to Home position" translation="" />
	<label commandName="KnotsTechnicallyMatchButItsProbablyJustRoundoffFromASeashell" devLabel="Knots technically match, but it's probably just roundoff from a seashell" translation="" />
	<label commandName="LEADER_LINE_COMPUTE_FAILED" devLabel="The annotation compute failed. Please update the geometry selections or annotation properties." translation="" />
	<label commandName="LEADER_LINE_SELECTION_LOST" devLabel="The selection geometry has become invalid. It is likely that the selection is missing. &#10;Please edit this annotation and select new reference geometry." translation="" />
	<label commandName="LIBRARY_ITEM_STACK_CHANGED" devLabel="The fastener no longer fits the updated geometry. Use Edit Fastener to select a new one." translation="" />
	<label commandName="LIBRARY_ITEM_STACK_HOLE_CHANGED" devLabel="The fastener no longer fits the updated geometry. Use the Edit Fastener tool to select a new fastener." translation="" />
	<label commandName="LINK_PATH_LOST" devLabel="Motion Link path to joint is missing" translation="" />
	<label commandName="LIP_BODY_FAILED" devLabel="Lip body creation failed." translation="" />
	<label commandName="LIP_CLEARANCE_CUT_FAILED" devLabel="The clearance between the path and the lip failed." translation="" />
	<label commandName="LIP_EXTENTS_MAY_CAUSE_UNEXPECTED_RESULTS" devLabel="Potential problem computing extents.  Consider shelling first." translation="" />
	<label commandName="LIP_GEOM_SPLIT_BODY_ERR" devLabel="Cannot create Lip feature because it would change the number of bodies." translation="" />
	<label commandName="LIP_GROOVE_BODY_FAILED" devLabel="Groove body creation failed." translation="" />
	<label commandName="LIP_INCOMPATIBLE_PATH_AND_PULL_DIRECTION" devLabel="The non-tangent continuous edges in the path are not perpendicular to the pull direction and would create undesirable corner transitions.&#10; &#10;Try Guide Surface instead, select a different Pull Direction plane that is parallel to the path plane, or modify the body edges to be tangent continuous." translation="" />
	<label commandName="LIP_INVALID_EXTENT" devLabel="The extent selection failed to split the lip." translation="" />
	<label commandName="LIP_INVALID_GUIDE_SURFACE" devLabel="Not a valid guide surface." translation="" />
	<label commandName="LIP_INVALID_HEIGHT" devLabel="Parameter value for the height is invalid. Please inspect the parameters." translation="" />
	<label commandName="LIP_INVALID_PARAMETERS" devLabel="Parameter value of the feature is incorrect. Please inspect the parameters." translation="" />
	<label commandName="LIP_INVALID_PATH" devLabel="Not a valid path." translation="" />
	<label commandName="LIP_INVALID_PULL_DIRECTION" devLabel="Not a valid pull direction." translation="" />
	<label commandName="LIP_INVALID_TAPERANGLE" devLabel="Parameter value for the taper angle is invalid. Please inspect the parameters." translation="" />
	<label commandName="LIP_INVALID_WIDTH" devLabel="Parameter value for the width is invalid. Please inspect the parameters." translation="" />
	<label commandName="LIP_NO_CHANGE" devLabel="Lip compute failed." translation="" />
	<label commandName="LIP_NO_TARGET_BODIES" devLabel="Could not find the body for the feature." translation="" />
	<label commandName="LIP_PARAMETER_LESS_THAN_KNIFE" devLabel="Shoulder width must be greater than the knife edge threshold, or equal to zero." translation="" />
	<label commandName="LIP_PLASTIC_RULE_MISMATCH" devLabel="Plastic Rules for the Lip and Groove components do not match.  Lip component rule will be used for the Groove." translation="" />
	<label commandName="LIP_PROFILE_FAILED" devLabel="Parameter value of the profile shape is invalid. Please inspect the parameters." translation="" />
	<label commandName="LIP_REVEAL_FAILED" devLabel="The reveal portion of the lip failed." translation="" />
	<label commandName="LIP_SWEEP_FAILED" devLabel="Could not sweep the profile along the path." translation="" />
	<label commandName="LOFTED_FLANGE_UNABLE_BUILD_WIRE_BODY" devLabel="Cannot convert profiles to sheet metal flanges. Edit the selected profiles or select different profiles." translation="" />
	<label commandName="LOFT_CENTER_LINE_LOST" devLabel="Minimum of two profiles are required to create a loft. Select sketch curve as a centerline." translation="" />
	<label commandName="LOFT_COINCIDENT_POINT_SECTION" devLabel="A point profile can not be coincident with a non-point profile for a loft." translation="" />
	<label commandName="LOFT_COPLANAR_CLOSED_SECTIONS" devLabel="Closed profiles can not be coplanar for a loft." translation="" />
	<label commandName="LOFT_FOLLOWING_POINT_SECTION" devLabel="There must be at least one intermediate non-point profile for a loft." translation="" />
	<label commandName="LOFT_GUIDE_RAILS_LOST" devLabel="Minimum of two profiles are required to create a loft. Select sketch curves as rails." translation="" />
	<label commandName="LOFT_GUIDE_RAIL_POINT_SPLIT" devLabel="Break the rail sketch geometry where it meets the point profile,&#10;    then click the Add button before selecting each rail." translation="" />
	<label commandName="LOFT_ILLEGAL_POINT_SECTION" devLabel="There was a problem with one or more of the point profiles.&#10;    Try changing or removing the point profiles." translation="" />
	<label commandName="LOFT_INTERNAL_POINT_SECTION" devLabel="A point profile can only be used as the first or last profile of a loft." translation="" />
	<label commandName="LOFT_MIN_PROFILES_NOT_MEET" devLabel="Minimum of two profiles are required to create a Loft." translation="" />
	<label commandName="LOFT_NO_TOOLBODY" devLabel="Cannot create tool body for loft. Check inputs." translation="" />
	<label commandName="LOFT_TOOLBODY_CREATE_FAIL" devLabel="Cannot create tool body for loft." translation="" />
	<label commandName="LabelSymmetricConfig" devLabel="(Symmetric)" translation="" />
	<label commandName="LabelTwoOffsetsWidthConfig" devLabel="(Two Offsets)" translation="" />
	<label commandName="LabelTwoSideWidthConfig" devLabel="(Two Sides)" translation="" />
	<label commandName="Laser Weld" devLabel="Laser Weld" translation="" />
	<label commandName="LatestDocEmptyPath" devLabel="Failed to get the latest referenced document" translation="" />
	<label commandName="LatestXRefDocOpenFailed" devLabel="Could not open linked document." translation="" />
	<label commandName="LatticeEdgeSelectionCategory" devLabel="Lattice Edge" translation="" />
	<label commandName="LatticeEdgeSelectionId" devLabel="LatticeEdge" translation="" />
	<label commandName="LatticeEdgeSelectionPluralId" devLabel="LatticeEdges" translation="" />
	<label commandName="LatticeEntitySelectionId" devLabel="LatticeEntity" translation="" />
	<label commandName="LatticeEntitySelectionsId" devLabel="LatticeEntities" translation="" />
	<label commandName="LatticeFaceSelectionCategory" devLabel="Lattice Face" translation="" />
	<label commandName="LatticeFaceSelectionId" devLabel="LatticeFace" translation="" />
	<label commandName="LatticeFaceSelectionsId" devLabel="LatticeFaces" translation="" />
	<label commandName="LatticeRigDeformDefaultUserName" devLabel="Lattice" translation="" />
	<label commandName="LatticeRigDeformSelectionId" devLabel="LatticeRigDeform" translation="" />
	<label commandName="LatticeRigDeformSelectionsId" devLabel="LatticeRigDeforms" translation="" />
	<label commandName="LatticeRigDeformersSelectionId" devLabel="LatticeRigDeformers" translation="" />
	<label commandName="LatticeRigDeformersSelectionsId" devLabel="LatticeRigDeformers" translation="" />
	<label commandName="LatticeRigSelectionCategory" devLabel="Lattice Rig" translation="" />
	<label commandName="LatticeVertexSelectionCategory" devLabel="Lattice vertex" translation="" />
	<label commandName="LatticeVertexSelectionId" devLabel="LatticeVertex" translation="" />
	<label commandName="LatticeVertexSelectionsId" devLabel="LatticeVertices" translation="" />
	<label commandName="LeaderLineNoteOutdatedError" devLabel="The leader line note may have failed to compute, or the associated geometry has changed." translation="" />
	<label commandName="LeaderLineNote_Multiple_Notes_On_Geometry" devLabel="Multiple Notes defined for geometry" translation="" />
	<label commandName="LeaderLineNote_Selection_Lost" devLabel="Selected Geometry Lost" translation="" />
	<label commandName="LeaderNoteDefaultText" devLabel="Note text" translation="" />
	<label commandName="LeastMaterialConditionTooltip" devLabel="Least Material Condition" translation="" />
	<label commandName="LegacyMemberReplaceColumnName" devLabel="Configuration" translation="" />
	<label commandName="Length" devLabel="Length" translation="" />
	<label commandName="Length_Designation" devLabel="Length Designation" translation="" />
	<label commandName="LibraryItemFacade1" devLabel="Unexpected Error - missing some information." translation="" />
	<label commandName="LibraryItemFacade2" devLabel="Error while creating fasteners - %1%." translation="" />
	<label commandName="LibraryItemFacade3" devLabel="Error while creating the Fasteners folder where fasteners are stored." translation="" />
	<label commandName="LibraryItemFacade4" devLabel="Project information management properties (PIM) weren't updated correctly." translation="" />
	<label commandName="LibraryItemFacade6" devLabel="You don't have access to the %1% project anymore. You were either removed from the project, or the project has been archived." translation="" />
	<label commandName="LibraryItemFacade7" devLabel="Unexpected Error - missing cloud file local path." translation="" />
	<label commandName="LibraryItemsSelectionId" devLabel="Fasteners" translation="" />
	<label commandName="LibraryOptionsGroup" devLabel="Library" translation="" />
	<label commandName="LibraryOptionsGroupToolTip" devLabel="Preferences that drives Library" translation="" />
	<label commandName="LibraryOptionsSysFldrHub" devLabel="System Folder Hub" translation="" />
	<label commandName="LibraryOptionsSysProjName" devLabel="System Folder Project Name" translation="" />
	<label commandName="LibraryTemplateHydrator_BodyNull" devLabel="Root component is null." translation="" />
	<label commandName="LibraryTemplateHydrator_CantOpenFile" devLabel="Could not open template file %1%." translation="" />
	<label commandName="LibraryTemplateHydrator_CantReadThreadData" devLabel="Failed to read thread data." translation="" />
	<label commandName="LibraryTemplateHydrator_EmptyParameterTable" devLabel="Parameter table is empty." translation="" />
	<label commandName="LibraryTemplateHydrator_EmptyPhysicalName" devLabel="Display name of the physical material is an empty string." translation="" />
	<label commandName="LibraryTemplateHydrator_EmptyPhysicalProteinId" devLabel="Protein ID of the physical material is an empty string." translation="" />
	<label commandName="LibraryTemplateHydrator_FailedToCloneMaterial" devLabel="Failed to clone material." translation="" />
	<label commandName="LibraryTemplateHydrator_FailedToMakeThreadRequest" devLabel="Failed to create a thread request." translation="" />
	<label commandName="LibraryTemplateHydrator_MaterialAssetInstanceNull" devLabel="Material asset instance is null." translation="" />
	<label commandName="LibraryTemplateHydrator_NoAssetAdapter" devLabel="Template document is missing an asset adapter." translation="" />
	<label commandName="LibraryTemplateHydrator_NoAssets" devLabel="Template document does not contain any assets." translation="" />
	<label commandName="LibraryTemplateHydrator_NoAssociatedBody" devLabel="Thread feature does not have any associated body." translation="" />
	<label commandName="LibraryTemplateHydrator_NoDcBody" devLabel="Body associated to the thread feature is not DcBody." translation="" />
	<label commandName="LibraryTemplateHydrator_NoDesignFragment" devLabel="Root component of the template file does not have a design fragment." translation="" />
	<label commandName="LibraryTemplateHydrator_NoDocumentManager" devLabel="Could not get document manager." translation="" />
	<label commandName="LibraryTemplateHydrator_NoFace" devLabel="Thread feature does not have any face." translation="" />
	<label commandName="LibraryTemplateHydrator_NoMaterialAssetInstance" devLabel="Could not find material asset instance." translation="" />
	<label commandName="LibraryTemplateHydrator_NoRootComponent" devLabel="Could not get the root component." translation="" />
	<label commandName="LibraryTemplateHydrator_NoThreadFeature" devLabel="Template file does not have a thread feature." translation="" />
	<label commandName="LibraryTemplateHydrator_NoTransactionManager" devLabel="Could not get the transaction manager" translation="" />
	<label commandName="LibraryTemplateHydrator_UninitialisedParameterTable" devLabel="Parameter table is not initialised." translation="" />
	<label commandName="LibraryUtilsBolts" devLabel="Bolts and Screws" translation="" />
	<label commandName="LibraryUtilsNuts" devLabel="Nuts" translation="" />
	<label commandName="LibraryUtilsPEM" devLabel="PEM" translation="" />
	<label commandName="LibraryUtilsRivets" devLabel="Rivets" translation="" />
	<label commandName="LibraryUtilsWashers" devLabel="Washers" translation="" />
	<label commandName="LineProfileTooltip" devLabel="Line Profile" translation="" />
	<label commandName="Linear" devLabel="Linear" translation="" />
	<label commandName="Linear Weld" devLabel="Linear Weld" translation="" />
	<label commandName="LipFeatureName" devLabel="Lip" translation="" />
	<label commandName="LipNoTargetBodies" devLabel="No target Bodies." translation="" />
	<label commandName="LipNoTargetComponent" devLabel="No target component." translation="" />
	<label commandName="LoadPackagesAsXRef" devLabel="XRef Packages" translation="" />
	<label commandName="LoadPackagesAsXRefToolTip" devLabel="Load packages as XRef when generating PCB 3d document" translation="" />
	<label commandName="Loft" devLabel="No target component." translation="" />
	<label commandName="LoftEndDirection" devLabel="Takeoff Weight" translation="" />
	<label commandName="LoftEndTakeOffAngle" devLabel="Takeoff Angle" translation="" />
	<label commandName="LoftFeatureName" devLabel="Loft" translation="" />
	<label commandName="LoftFirstProfile" devLabel="Profile 1" translation="" />
	<label commandName="LoftProfileN" devLabel="Profile %1%" translation="" />
	<label commandName="LoftStartDirection" devLabel="Takeoff Weight" translation="" />
	<label commandName="LoftStartTakeOffAngle" devLabel="Takeoff Angle" translation="" />
	<label commandName="LoftedFlangeInvalidSelection" devLabel="Invalid selection for lofted flange." translation="" />
	<label commandName="LoftedFlangeNoComponent" devLabel="No target component." translation="" />
	<label commandName="LoftedFlangeUnableToMergeSketchProfiles" devLabel="Unable to merge sketch profiles." translation="" />
	<label commandName="MATCHING_HOLE_COMPUTE_FAILED" devLabel="No selections match the previously annotated geometry and the current selections are inconsistent. Please update the selections and select only identical holes or bosses." translation="" />
	<label commandName="MATCH_BREP_ENTITY_REF_LOST" devLabel="Match is using cached brep edges to solve. Please reselect brep edges." translation="" />
	<label commandName="MATCH_BREP_ORDER_FAILED" devLabel="Match failed to sequentially order brep edges." translation="" />
	<label commandName="MATCH_BREP_TARGET_LOST" devLabel="Match cannot find brep edges." translation="" />
	<label commandName="MATCH_SKETCH_ENTITY_REF_LOST" devLabel="Match is using cached sketch curves to solve. Please reselect sketch curves." translation="" />
	<label commandName="MATCH_SKETCH_JOIN_FAILED" devLabel="Match failed to join sketch curves." translation="" />
	<label commandName="MATCH_SKETCH_TARGET_LOST" devLabel="Match cannot find sketch curves." translation="" />
	<label commandName="MATCH_TSPLINE_EDGES_LOST" devLabel="Match cannot find T-Spline edges." translation="" />
	<label commandName="MCPCreateTool" devLabel="MCP Create Tool" translation="" />
	<label commandName="MCPDeleteTool" devLabel="MCP Delete Tool" translation="" />
	<label commandName="MCPExecuteTool" devLabel="MCP Execute Tool" translation="" />
	<label commandName="MCPUpdateTool" devLabel="MCP Update Tool" translation="" />
	<label commandName="MESH_SELECTION_OPTION_GROUP" devLabel="Modify Selection" translation="" />
	<label commandName="MESH_SELECTOR_BRUSH_SIZE" devLabel="Brush Size" translation="" />
	<label commandName="MESH_SELECTOR_EXPANDTOCONNECTED_MESH_SEL_ACTION" devLabel="Expand to Connected" translation="" />
	<label commandName="MESH_SELECTOR_EXPANDTOGROUP_MESH_SEL_ACTION" devLabel="Expand to Face Group" translation="" />
	<label commandName="MESH_SELECTOR_GROW_MESH_SEL" devLabel="Grow" translation="" />
	<label commandName="MESH_SELECTOR_GROW_SHRINK_MESH_SEL_EXPAND" devLabel="Expand" translation="" />
	<label commandName="MESH_SELECTOR_GROW_SHRINK_MESH_SEL_GROW" devLabel="Grow/Shrink" translation="" />
	<label commandName="MESH_SELECTOR_INVERT_MESH_SEL" devLabel="Invert" translation="" />
	<label commandName="MESH_SELECTOR_INVERT_MESH_SEL_ACTION" devLabel="Invert Selection" translation="" />
	<label commandName="MESH_SELECTOR_N_SELECTED_TRIANGLES" devLabel="Selected Faces" translation="" />
	<label commandName="MESH_SELECTOR_SHRINK_MESH_SEL" devLabel="Shrink" translation="" />
	<label commandName="MIRROR_PATTERN_JOIN_UNSUCCESSFUL" devLabel="Could not join, multiple bodies created." translation="" />
	<label commandName="MIRROR_PATTERN_MISSING_PLANE" devLabel="Missing mirror plane" translation="" />
	<label commandName="MISSING_REF_ERROR" devLabel="Missing reference" translation="" />
	<label commandName="MMKSUnitSystemName" devLabel="standard MKS (m, kg, second, Celsius) units" translation="" />
	<label commandName="MOTION_LINK_OUT_OF_DATE" devLabel="Motion Link offset could not be updated. Cached offset will be used" translation="" />
	<label commandName="MULTIPLE_HOLE_NOTES_ON_GEOMETRY" devLabel="Some of the selected holes/bosses already have a Hole Note defined. &#10;Please edit the hole selections and remove any selections shared with an existing Hole Note." translation="" />
	<label commandName="MULTIPLE_NOTES_ON_GEOMETRY" devLabel="The selected geometry already has a Note defined. &#10;Please edit the leader line point selection to one that is not shared with an existing Note." translation="" />
	<label commandName="MULTIPLE_TARGET_UNSUPPORTED" devLabel="The feature doesn't support multiple targets, please edit the feature to select one target." translation="" />
	<label commandName="MXBUComputeNotNeeded" devLabel="Design looks fine. No unresolved components detected." translation="" />
	<label commandName="MXBUComputeTimelineRollNeeded" devLabel="The timeline history marker is rolled back. Move the history marker to end and try again." translation="" />
	<label commandName="MakeDeletionFeature" devLabel="A Delete feature will be added to the timeline." translation="" />
	<label commandName="Manufacture" devLabel="Manufacture workspace" translation="" />
	<label commandName="MarkTransactionBoundaryError" devLabel="ASM mark transaction boundary error." translation="" />
	<label commandName="MatchAddParmFailedTargetInput" devLabel="Invalid Target input" translation="" />
	<label commandName="MatchBuildFailed" devLabel="Failed to modify the T-Spline surface for the match operation." translation="" />
	<label commandName="MatchEmptyTSplineEdges" devLabel="No T-Spline edges selected" translation="" />
	<label commandName="MatchFeatureSick" devLabel="Cannot compute Match feature.&#10;Edit the Match to reselect edges&#10;or adjust settings." translation="" />
	<label commandName="MatchGetAlignedEdgesFailed" devLabel="Failed to get the algined edges for the match operation." translation="" />
	<label commandName="MatchSetConstraintFailed" devLabel="Failed to set a constraint for the match operation." translation="" />
	<label commandName="MateConvertError" devLabel="Constraint geometry associations are missing. Constraint cannot be edited" translation="" />
	<label commandName="MatrixAxisGeometryMissing" devLabel="Axis geometry is missing" translation="" />
	<label commandName="MatrixEdgeGeometryMissing" devLabel="Edge geometry is missing" translation="" />
	<label commandName="MatrixOriginGeometryMissing" devLabel="Origin geometry is missing" translation="" />
	<label commandName="MatrixPlaneGeometryMissing" devLabel="Plane geometry is missing" translation="" />
	<label commandName="MatrixXAxisGeometryMissing" devLabel="X axis geometry is missing" translation="" />
	<label commandName="MaximumMaterialConditionTooltip" devLabel="Maximum Material Condition" translation="" />
	<label commandName="MemberReplaceColumnName" devLabel="%1%:%2% (Configured Component Insert)" translation="" />
	<label commandName="MemberReplace_GeneralErrorMsg" devLabel="Cannot switch Configuration. Make sure Fusion is online, then try again." translation="" />
	<label commandName="MemberReplace_ReplacementRefs" devLabel="Cannot update Configuration references." translation="" />
	<label commandName="MergeEdgeFailed" devLabel="Merge Edge operation failed." translation="" />
	<label commandName="MeshBodyDefaultUserName" devLabel="MeshBody" translation="" />
	<label commandName="MeshBodySelectionCategory" devLabel="Mesh Bodies" translation="" />
	<label commandName="MeshFaceGroupToolTip" devLabel="Color mesh bodies by face group" translation="" />
	<label commandName="MeshFaceGroupUserName" devLabel="Face Groups" translation="" />
	<label commandName="MeshFacetSelection" devLabel="Mesh Facet" translation="" />
	<label commandName="MeshFacetSelectionCategory" devLabel="Mesh Facets" translation="" />
	<label commandName="MeshFacetSelection_Plural" devLabel="Mesh Facets" translation="" />
	<label commandName="MeshPlanarSectionRequestFailed" devLabel="Mesh section failed." translation="" />
	<label commandName="MeshPlaneCutFailed" devLabel="Plane Cut failed." translation="" />
	<label commandName="MeshPointSelectionCategory" devLabel="Mesh Points" translation="" />
	<label commandName="MeshPointSelectionId" devLabel="Mesh Point" translation="" />
	<label commandName="MeshPointsSelectionId" devLabel="Mesh Points" translation="" />
	<label commandName="MeshSelectionsId" devLabel="Mesh Bodies" translation="" />
	<label commandName="MeshStyleOptionGroup" devLabel="Mesh Style" translation="" />
	<label commandName="MeshStyleOptionGroupToolTip" devLabel="Preferences that set Mesh rendering style" translation="" />
	<label commandName="MeshToolProps" devLabel="Mesh Selection Tool" translation="" />
	<label commandName="MetricTappingThreadsForPlastics" devLabel="Metric Tapping Threads for Plastics" translation="" />
	<label commandName="Metric_Forming_-_Coarse" devLabel="Metric Forming - Coarse" translation="" />
	<label commandName="Metric_Forming_-_Fine" devLabel="Metric Forming - Fine" translation="" />
	<label commandName="MidSurfaceError_NoSource" devLabel="Source bodies lost!" translation="" />
	<label commandName="MidSurfaceShellCreationFailure" devLabel="Failed to generate a mid-surface shell" translation="" />
	<label commandName="MidSurfaceShell_DefaultName" devLabel="Midsurface" translation="" />
	<label commandName="Millimeters" devLabel="Millimeters" translation="" />
	<label commandName="MinimumRadiusAnalysisDefaultUserName" devLabel="MinimumRadius" translation="" />
	<label commandName="MirrorCGNotSupported" devLabel="Mirror does not support construction geometry patterns." translation="" />
	<label commandName="MirrorChangeSheetMetalDataCommandTooltip" devLabel="Selecting a different rule for mirrored components is not supported. " translation="" />
	<label commandName="MirrorComponent" devLabel="MirrorComponent" translation="" />
	<label commandName="MirrorComponentStrText" devLabel="mirrored" translation="" />
	<label commandName="MirrorPatternFeatureName" devLabel="Mirror" translation="" />
	<label commandName="MirrorReNameComponnet" devLabel="(Mirror)" translation="" />
	<label commandName="MirrorSuffix" devLabel="(Mirror)" translation="" />
	<label commandName="MissingJORef" devLabel="Missing snap reference" translation="" />
	<label commandName="MixedChildOffsetSketchError" devLabel="Select only offset or non-offset curves at the same time. Alternatively, remove the offset constraint from the desired offset curves, then try again. " translation="" />
	<label commandName="MmMKSUnitSystemName" devLabel="mm modeling length with MKS (m, kg, second, Celsius) units" translation="" />
	<label commandName="ModelingError" devLabel="Modeling Error: Can't create hole toolbody, please check inputs" translation="" />
	<label commandName="ModelingErrorBadInputToLoft4" devLabel="Modeling Error: Minimum two profiles are required to create a Loft! Please select sketch curve as a Centerline" translation="" />
	<label commandName="ModelingErrorBadInputToLoft5" devLabel="Modeling Error: Minimum two profiles are required to create a Loft! Please select sketch curve(s) as a Rail(s)" translation="" />
	<label commandName="ModelingErrorBadInputToLoft6" devLabel="Modeling Error: Minimum two profiles are required to create a Loft!" translation="" />
	<label commandName="ModelingErrorBadInputToLoft7" devLabel="Modeling Error: Minimum two profiles are required to create a Loft!" translation="" />
	<label commandName="ModelingErrorConnectorObstacleRequest" devLabel="Modeling Error: Can't create connector obstacle toolbody, please check inputs" translation="" />
	<label commandName="ModelingFeatureRule" devLabel="Modeling Feature Rule 1" translation="" />
	<label commandName="Models" devLabel="Models" translation="" />
	<label commandName="Modify Fastener" devLabel="Modify Fastener" translation="" />
	<label commandName="MoveFaceGeneralError" devLabel="Move Face fails due to unexpected result" translation="" />
	<label commandName="MultipleAreaBoardErrorNew" devLabel="Multiple profiles defined. Edit the sketch to create a single profile." translation="" />
	<label commandName="MultipleEIPReferenceSelectionId" devLabel="References" translation="" />
	<label commandName="NONROOT_OCCURRENCE_PATH_ROOT" devLabel="Occurrence Path must be from root component" translation="" />
	<label commandName="NO_EXTEND_EDGE" devLabel="No Extend Edge Found!" translation="" />
	<label commandName="NO_REF_POINT" devLabel="No reference point found!" translation="" />
	<label commandName="NO_SOURCE_FACES" devLabel="No Source Faces Found!" translation="" />
	<label commandName="NO_TARGET_BODY" devLabel="No target body!" translation="" />
	<label commandName="NegativeGuideRail" devLabel="Guide Rail Distance cannot be negative." translation="" />
	<label commandName="No Replacement" devLabel="No Replacement" translation="" />
	<label commandName="NoConstructionGeometry" devLabel="No construction geometry found for pattern" translation="" />
	<label commandName="NoConstructionGeometrySelected" devLabel="No construction geometry selected for patterning" translation="" />
	<label commandName="NoDesignAsset" devLabel="The latest target document %1% does not contain a Design Asset" translation="" />
	<label commandName="NoGripsInTopos" devLabel="No valid selection for smoothing" translation="" />
	<label commandName="NoIntersectingTargetBodyError" devLabel="No intersecting target body was found." translation="" />
	<label commandName="NoLinkBetweenDocs" devLabel="Could not find link between source document: %1% and target document: %2%" translation="" />
	<label commandName="NoLinkMgr" devLabel="Could not find Link Mgr in the source document %1%!!" translation="" />
	<label commandName="NoNeedOfDesignDocTypeConversionWarning" devLabel="No need of conversion because current and target design document types are same." translation="" />
	<label commandName="NoPatternSources" devLabel="No pattern source paths found" translation="" />
	<label commandName="NoShellBodySelectionCategory" devLabel="No Shell Bodies" translation="" />
	<label commandName="NoSourceWMPlaceholder" devLabel="Working Model missing design placeholder." translation="" />
	<label commandName="NoSurfacesToTrim" devLabel="Cutting Tool does not intersect any seletected surface!" translation="" />
	<label commandName="NoTargetBodyError" devLabel="No target body found to cut or intersect!" translation="" />
	<label commandName="NoTargetBodyFound" devLabel="No target body found!" translation="" />
	<label commandName="NoValidDecalError" devLabel="no valid decal patch to use" translation="" />
	<label commandName="NoVisibleSurfacesToTrim1" devLabel="Cutting Tool does not intersect any surface!" translation="" />
	<label commandName="NoVisibleSurfacesToTrim2" devLabel="There are no visible Surfaces to trim" translation="" />
	<label commandName="NonAssociativeFileError" devLabel="Missing 3D Model, a placeholder shape is used instead." translation="" />
	<label commandName="NormalOnPrincipalPlaneThroughEdgeError" devLabel="Principal Plane Through Edge Vector Failed: failed to evaluate direction" translation="" />
	<label commandName="NotAssemblyDesignError" devLabel="Modeling mode can only be toggled in assembly designs" translation="" />
	<label commandName="NotAvailableError" devLabel="The associated file is not ready for access, please try again later." translation="" />
	<label commandName="NotEqualTooltip" devLabel="Not Equal" translation="" />
	<label commandName="NotSupported1" devLabel="%1% command is not supported for non-associative references" translation="" />
	<label commandName="NotSupported2" devLabel="%1% command is only supported for Fusion assets" translation="" />
	<label commandName="NotSupported3" devLabel="%1% command can only work with valid Fusion root components" translation="" />
	<label commandName="NotSupported4" devLabel="Get Latest command is only supported on Fusion design data" translation="" />
	<label commandName="NotSupportedEdit" devLabel="Parameter edit type not supported!" translation="" />
	<label commandName="NothingConvertToDMFeature" devLabel="Nothing converted." translation="" />
	<label commandName="NothingStitched" devLabel="Modeling Error: Nothing has stitched." translation="" />
	<label commandName="NutThreadIsMissingBolt" devLabel="The nut is not properly positioned on the bolt." translation="" />
	<label commandName="OCCURRENCE_LOST" devLabel="Fails to find occurrence and cache is used" translation="" />
	<label commandName="OCCURRENCE_MATCH_FAIL" devLabel="Occurrence Path is not matched" translation="" />
	<label commandName="OCCURRENCE_PATH_LOST" devLabel="Failed to find occurrence path" translation="" />
	<label commandName="OCCURRENCE_TRANSFORM_NOT_FOUND" devLabel="Occurrence transform for feature not found" translation="" />
	<label commandName="OFFSET_GENERIC_FAILURE" devLabel="The offset can not be created at this distance.&#10;Try adjusting the Distance, the selection set,&#10;or change the Offset Type." translation="" />
	<label commandName="ORIGIN_AXIS_GEOMETRY_MISSING" devLabel="Axis geometry is missing" translation="" />
	<label commandName="ORIGIN_SELECTION_MISSING" devLabel="Origin geometry is missing." translation="" />
	<label commandName="ORIGIN_X_AXIS_REF_EDGE_MISSING" devLabel="Origin's reference x-axis selection is missing." translation="" />
	<label commandName="ORIGIN_Z_AXIS_REF_MISSING" devLabel="Origin's primary axis selection is missing." translation="" />
	<label commandName="OWNER_OCCURRENCE_LOST" devLabel="Failed to get owner occurrence transform" translation="" />
	<label commandName="ObjectPathReadonlyWarning" devLabel="some selected object is readonly and cannot be deleted." translation="" />
	<label commandName="OccurrenceName" devLabel="Occurrence" translation="" />
	<label commandName="OfflineFailedGetLatestMsg" devLabel="Latest version of the file %1% is not available in Offline mode. Please switch to Online mode to perform the %2% command." translation="" />
	<label commandName="OffsetDistance" devLabel="Distance" translation="" />
	<label commandName="OffsetFacesFailed" devLabel="Brep transaction boundary is not set correctly." translation="" />
	<label commandName="OffsetShell_DefaultName" devLabel="Midsurface" translation="" />
	<label commandName="OffsetSketchBadCurvesError" devLabel="Could not offset curves." translation="" />
	<label commandName="OffsetSketchFailedError" devLabel="Offset creation failed." translation="" />
	<label commandName="OffsetSketchFailedTopologyChangeError" devLabel="Offset creation failed as the topology of the offset curves does not match the topology of the original curves." translation="" />
	<label commandName="OffsetSketchNoGeomError" devLabel="The sketch offset created no geometry. Modify the offset dimension or verify the changes are correct." translation="" />
	<label commandName="OffsetSketchUnequalCurvesNumberError" devLabel="The number of parent and child curves is not equal." translation="" />
	<label commandName="OpenRefdDesignForUpdate" devLabel="Failed to Open Refd Design from path: %1% in context of assembly for update." translation="" />
	<label commandName="OriginBrowserLabel" devLabel="Origin" translation="" />
	<label commandName="Other" devLabel="Other" translation="" />
	<label commandName="OutsideThickness" devLabel="Outside Thickness" translation="" />
	<label commandName="OvalHeadMachineScrew" devLabel="Oval Head Machine Screw" translation="" />
	<label commandName="Oval_Height" devLabel="Oval Height" translation="" />
	<label commandName="Oval_Hex_Thread_Forming_Coarse_Inch_Screw" devLabel="Oval Hex Thread Forming Coarse Inch Screw" translation="" />
	<label commandName="Oval_Hex_Thread_Forming_Coarse_Screw" devLabel="Oval Hex Thread Forming Coarse Screw" translation="" />
	<label commandName="Oval_Hex_Thread_Forming_Fine_Inch_Screw" devLabel="Oval Hex Thread Forming Fine Inch Screw" translation="" />
	<label commandName="Oval_Hex_Thread_Forming_Fine_Screw" devLabel="Oval Hex Thread Forming Fine Screw" translation="" />
	<label commandName="Oval_Phillips_Thread_Forming_Coarse_Inch_Screw" devLabel="Oval Phillips Thread Forming Coarse Inch Screw" translation="" />
	<label commandName="Oval_Phillips_Thread_Forming_Coarse_Screw" devLabel="Oval Phillips Thread Forming Coarse Screw" translation="" />
	<label commandName="Oval_Phillips_Thread_Forming_Fine_Inch_Screw" devLabel="Oval Phillips Thread Forming Fine Inch Screw" translation="" />
	<label commandName="Oval_Phillips_Thread_Forming_Fine_Screw" devLabel="Oval Phillips Thread Forming Fine Screw" translation="" />
	<label commandName="Oval_Pozidriv_Thread_Forming_Coarse_Inch_Screw" devLabel="Oval Pozidriv Thread Forming Coarse Inch Screw" translation="" />
	<label commandName="Oval_Pozidriv_Thread_Forming_Coarse_Screw" devLabel="Oval Pozidriv Thread Forming Coarse Screw" translation="" />
	<label commandName="Oval_Pozidriv_Thread_Forming_Fine_Inch_Screw" devLabel="Oval Pozidriv Thread Forming Fine Inch Screw" translation="" />
	<label commandName="Oval_Pozidriv_Thread_Forming_Fine_Screw" devLabel="Oval Pozidriv Thread Forming Fine Screw" translation="" />
	<label commandName="Oval_Security_Torx_Plus_Thread_Forming_Coarse_Inch_Screw" devLabel="Oval Security Torx Plus Thread Forming Coarse Inch Screw" translation="" />
	<label commandName="Oval_Security_Torx_Plus_Thread_Forming_Coarse_Screw" devLabel="Oval Security Torx Plus Thread Forming Coarse Screw" translation="" />
	<label commandName="Oval_Security_Torx_Plus_Thread_Forming_Fine_Inch_Screw" devLabel="Oval Security Torx Plus Thread Forming Fine Inch Screw" translation="" />
	<label commandName="Oval_Security_Torx_Plus_Thread_Forming_Fine_Screw" devLabel="Oval Security Torx Plus Thread Forming Fine Screw" translation="" />
	<label commandName="Oval_Slotted+Phillips_Thread_Forming_Coarse_Inch_Screw" devLabel="Oval Slotted+Phillips Thread Forming Coarse Inch Screw" translation="" />
	<label commandName="Oval_Slotted+Phillips_Thread_Forming_Coarse_Screw" devLabel="Oval Slotted+Phillips Thread Forming Coarse Screw" translation="" />
	<label commandName="Oval_Slotted+Phillips_Thread_Forming_Fine_Inch_Screw" devLabel="Oval Slotted+Phillips Thread Forming Fine Inch Screw" translation="" />
	<label commandName="Oval_Slotted+Phillips_Thread_Forming_Fine_Screw" devLabel="Oval Slotted+Phillips Thread Forming Fine Screw" translation="" />
	<label commandName="Oval_Slotted+Pozidriv_Thread_Forming_Coarse_Inch_Screw" devLabel="Oval Slotted+Pozidriv Thread Forming Coarse Inch Screw" translation="" />
	<label commandName="Oval_Slotted+Pozidriv_Thread_Forming_Coarse_Screw" devLabel="Oval Slotted+Pozidriv Thread Forming Coarse Screw" translation="" />
	<label commandName="Oval_Slotted+Pozidriv_Thread_Forming_Fine_Inch_Screw" devLabel="Oval Slotted+Pozidriv Thread Forming Fine Inch Screw" translation="" />
	<label commandName="Oval_Slotted+Pozidriv_Thread_Forming_Fine_Screw" devLabel="Oval Slotted+Pozidriv Thread Forming Fine Screw" translation="" />
	<label commandName="Oval_Slotted+Torx_Plus_Thread_Forming_Coarse_Inch_Screw" devLabel="Oval Slotted+Torx Plus Thread Forming Coarse Inch Screw" translation="" />
	<label commandName="Oval_Slotted+Torx_Plus_Thread_Forming_Coarse_Screw" devLabel="Oval Slotted+Torx Plus Thread Forming Coarse Screw" translation="" />
	<label commandName="Oval_Slotted+Torx_Plus_Thread_Forming_Fine_Inch_Screw" devLabel="Oval Slotted+Torx Plus Thread Forming Fine Inch Screw" translation="" />
	<label commandName="Oval_Slotted+Torx_Plus_Thread_Forming_Fine_Screw" devLabel="Oval Slotted+Torx Plus Thread Forming Fine Screw" translation="" />
	<label commandName="Oval_Slotted_Thread_Forming_Coarse_Inch_Screw" devLabel="Oval Slotted Thread Forming Coarse Inch Screw" translation="" />
	<label commandName="Oval_Slotted_Thread_Forming_Coarse_Screw" devLabel="Oval Slotted Thread Forming Coarse Screw" translation="" />
	<label commandName="Oval_Slotted_Thread_Forming_Fine_Inch_Screw" devLabel="Oval Slotted Thread Forming Fine Inch Screw" translation="" />
	<label commandName="Oval_Slotted_Thread_Forming_Fine_Screw" devLabel="Oval Slotted Thread Forming Fine Screw" translation="" />
	<label commandName="Oval_Torx_Plus_Thread_Forming_Coarse_Inch_Screw" devLabel="Oval Torx Plus Thread Forming Coarse Inch Screw" translation="" />
	<label commandName="Oval_Torx_Plus_Thread_Forming_Coarse_Screw" devLabel="Oval Torx Plus Thread Forming Coarse Screw" translation="" />
	<label commandName="Oval_Torx_Plus_Thread_Forming_Fine_Inch_Screw" devLabel="Oval Torx Plus Thread Forming Fine Inch Screw" translation="" />
	<label commandName="Oval_Torx_Plus_Thread_Forming_Fine_Screw" devLabel="Oval Torx Plus Thread Forming Fine Screw" translation="" />
	<label commandName="OverrideBendReliefConfigGroup" devLabel="Bend Relief Override (%1%)" translation="" />
	<label commandName="OverrideOptionGroupBendOverrideConfig" devLabel="Bend Override" translation="" />
	<label commandName="OverrideThreeBendCornerConfigGroup" devLabel="3-Bend Corner Override (%1%)" translation="" />
	<label commandName="OverrideTwoBendCornerConfigGroup" devLabel="2-Bend Corner Override (%1%)" translation="" />
	<label commandName="PATCH_NO_TOOLBODY" devLabel="Modeling Error: Can't create patch toolbody, please check the inputs." translation="" />
	<label commandName="PATH_PATTERN_INVALID_COUNT" devLabel="Invalid count" translation="" />
	<label commandName="PATH_PATTERN_INVALID_START_RANGE" devLabel="Invalid start range" translation="" />
	<label commandName="PATH_PATTERN_MISSING_OBJECTS_OR_PATH" devLabel="Missing objects or path" translation="" />
	<label commandName="PATTERN_BODY_LOST" devLabel="Could not resolve the body being patterned" translation="" />
	<label commandName="PATTERN_FACE_LOST" devLabel="Could not resolve the face being patterned" translation="" />
	<label commandName="PATTERN_FEATURES_NO_PASTE_INT_EDGES" devLabel="  No pattern instances could be intersected with the original body.&#10;    Try adjusting the pattern settings, or changing the selections." translation="" />
	<label commandName="PATTERN_INTEGER_COUNT" devLabel="The expression specifying the pattern count does not evaluate to an exact integer value. Edit the expression to repair it." translation="" />
	<label commandName="PATTERN_SOURCE_LOST_BODY" devLabel="A body is lost which is used as input for pattern. Try to edit the feature to repair it." translation="" />
	<label commandName="PATTERN_SOURCE_LOST_COMPINSTANCE" devLabel="A component instance is lost which is used as input for pattern. Try to edit the feature to repair it." translation="" />
	<label commandName="PATTERN_SOURCE_LOST_CONSTRUCTION_GEOMETRY" devLabel="A construction geometry is lost which is used as input for pattern. Try to edit the feature to repair it." translation="" />
	<label commandName="PATTERN_SOURCE_LOST_FACESET" devLabel="A face is lost which is used as input for pattern. Try to edit the feature to repair it." translation="" />
	<label commandName="PATTERN_SOURCE_LOST_FEATURE" devLabel="A feature is lost which is used as input for pattern. Try to edit the feature to repair it." translation="" />
	<label commandName="PCBBoardChangedIconMsg" devLabel="The PCB Board shape or height has changed since last update from EAGLE." translation="" />
	<label commandName="PCBBoardName" devLabel="Board" translation="" />
	<label commandName="PCBBoardOutline" devLabel="Outline" translation="" />
	<label commandName="PCBCompMovedIconMsg" devLabel="The PCB component has been moved since last update from EAGLE." translation="" />
	<label commandName="PCBCopperErrors" devLabel="Coppers" translation="" />
	<label commandName="PCBNewBoard" devLabel="Board" translation="" />
	<label commandName="PCBOutlineError" devLabel="Board Outline" translation="" />
	<label commandName="PCBOverlapError" devLabel="There is a copper overlap, remove overlap in the 2D PCB document and push again." translation="" />
	<label commandName="PCBPackgesInstanceName" devLabel="Packages" translation="" />
	<label commandName="PCBUncloseErrors" devLabel="Unclose" translation="" />
	<label commandName="PCBUnclosePolygonError" devLabel="Can't create the 3D model because the polygon is not closed. This could be due to tolerance or another reason. Please report this issue to Autodesk." translation="" />
	<label commandName="PIMApprovedBy" devLabel="Approved By" translation="" />
	<label commandName="PIMApprovedDate" devLabel="Approved Date" translation="" />
	<label commandName="PIMDesignMass" devLabel="Mass" translation="" />
	<label commandName="PIMDesignMaterial" devLabel="Material" translation="" />
	<label commandName="PIMDesigner" devLabel="Designer" translation="" />
	<label commandName="PIMManufacturer" devLabel="Manufacturer" translation="" />
	<label commandName="PIMManufacturingEngineer" devLabel="Manufacturing Engineer" translation="" />
	<label commandName="PIMMechanicalEngineer" devLabel="Mechanical Engineer" translation="" />
	<label commandName="PIMPartDescription" devLabel="Description" translation="" />
	<label commandName="PIMPartName" devLabel="Part Name" translation="" />
	<label commandName="PIMPartNumber" devLabel="Part Number" translation="" />
	<label commandName="PIMProject" devLabel="Project" translation="" />
	<label commandName="PIMStatus" devLabel="Status" translation="" />
	<label commandName="PIMStockNumber" devLabel="Stock Number" translation="" />
	<label commandName="PIMTitle" devLabel="Title" translation="" />
	<label commandName="PIPE_FAILED_TO_CREATE_GEOMETRY" devLabel="Failed to create the pipe geometry." translation="" />
	<label commandName="PIPE_INVALID_DIMENSIONS" devLabel="Cannot create pipe. The pipe dimensions are invalid. Try adjusting the pipe dimensions." translation="" />
	<label commandName="PIPE_PATH_NOT_FOUND" devLabel="The path for pipe cannot be found!" translation="" />
	<label commandName="PLANE1_SELECTION_MISSING" devLabel="Missing plane1" translation="" />
	<label commandName="PLANE2_SELECTION_MISSING" devLabel="Missing plane2" translation="" />
	<label commandName="PMISettings" devLabel="PMI Settings: " translation="" />
	<label commandName="PNMissingGeneric" devLabel="Configuration Name is displayed because Part Number is temporarily unavailable." translation="" />
	<label commandName="PNMissingOffline" devLabel="Configuration Name is displayed because Part Number is unavailable in offline mode. Go online to display Part Number." translation="" />
	<label commandName="PNMissingUnsaved" devLabel="Configuration Name is displayed because Part Number is unavailable until the component is saved. Save the design to generate and display Part Number." translation="" />
	<label commandName="PRIMITIVE_PROFILE_REFERENCE_LOST" devLabel="The primitive profile reference is lost." translation="" />
	<label commandName="PROFILE_NON_PLANAR" devLabel="Curves tracked in old profile are not coplanar anymore. The downstream result may be not your intent." translation="" />
	<label commandName="PROFILE_REFERENCE_LOST" devLabel="The profile reference is lost and this feature is using cached geometry.&#10;Edit this feature and select new profile references." translation="" />
	<label commandName="PROJECT_TO_SURFACE_FAILED" devLabel="Project to surface failed, please check the surface or the vector!" translation="" />
	<label commandName="PackagesWarning" devLabel="Components" translation="" />
	<label commandName="Pan_Hex_Thread_Forming_Coarse_Inch_Screw" devLabel="Pan Hex Thread Forming Coarse Inch Screw" translation="" />
	<label commandName="Pan_Hex_Thread_Forming_Coarse_Screw" devLabel="Pan Hex Thread Forming Coarse Screw" translation="" />
	<label commandName="Pan_Hex_Thread_Forming_Fine_Inch_Screw" devLabel="Pan Hex Thread Forming Fine Inch Screw" translation="" />
	<label commandName="Pan_Hex_Thread_Forming_Fine_Screw" devLabel="Pan Hex Thread Forming Fine Screw" translation="" />
	<label commandName="Pan_Phillips_Thread_Forming_Coarse_Inch_Screw" devLabel="Pan Phillips Thread Forming Coarse Inch Screw" translation="" />
	<label commandName="Pan_Phillips_Thread_Forming_Coarse_Screw" devLabel="Pan Phillips Thread Forming Coarse Screw" translation="" />
	<label commandName="Pan_Phillips_Thread_Forming_Fine_Inch_Screw" devLabel="Pan Phillips Thread Forming Fine Inch Screw" translation="" />
	<label commandName="Pan_Phillips_Thread_Forming_Fine_Screw" devLabel="Pan Phillips Thread Forming Fine Screw" translation="" />
	<label commandName="Pan_Pozidriv_Thread_Forming_Coarse_Inch_Screw" devLabel="Pan Pozidriv Thread Forming Coarse Inch Screw" translation="" />
	<label commandName="Pan_Pozidriv_Thread_Forming_Coarse_Screw" devLabel="Pan Pozidriv Thread Forming Coarse Screw" translation="" />
	<label commandName="Pan_Pozidriv_Thread_Forming_Fine_Inch_Screw" devLabel="Pan Pozidriv Thread Forming Fine Inch Screw" translation="" />
	<label commandName="Pan_Pozidriv_Thread_Forming_Fine_Screw" devLabel="Pan Pozidriv Thread Forming Fine Screw" translation="" />
	<label commandName="Pan_Security_Torx_Plus_Thread_Forming_Coarse_Inch_Screw" devLabel="Pan Security Torx Plus Thread Forming Coarse Inch Screw" translation="" />
	<label commandName="Pan_Security_Torx_Plus_Thread_Forming_Coarse_Screw" devLabel="Pan Security Torx Plus Thread Forming Coarse Screw" translation="" />
	<label commandName="Pan_Security_Torx_Plus_Thread_Forming_Fine_Inch_Screw" devLabel="Pan Security Torx Plus Thread Forming Fine Inch Screw" translation="" />
	<label commandName="Pan_Security_Torx_Plus_Thread_Forming_Fine_Screw" devLabel="Pan Security Torx Plus Thread Forming Fine Screw" translation="" />
	<label commandName="Pan_Slotted+Phillips_Thread_Forming_Coarse_Inch_Screw" devLabel="Pan Slotted+Phillips Thread Forming Coarse Inch Screw" translation="" />
	<label commandName="Pan_Slotted+Phillips_Thread_Forming_Coarse_Screw" devLabel="Pan Slotted+Phillips Thread Forming Coarse Screw" translation="" />
	<label commandName="Pan_Slotted+Phillips_Thread_Forming_Fine_Inch_Screw" devLabel="Pan Slotted+Phillips Thread Forming Fine Inch Screw" translation="" />
	<label commandName="Pan_Slotted+Phillips_Thread_Forming_Fine_Screw" devLabel="Pan Slotted+Phillips Thread Forming Fine Screw" translation="" />
	<label commandName="Pan_Slotted+Pozidriv_Thread_Forming_Coarse_Inch_Screw" devLabel="Pan Slotted+Pozidriv Thread Forming Coarse Inch Screw" translation="" />
	<label commandName="Pan_Slotted+Pozidriv_Thread_Forming_Coarse_Screw" devLabel="Pan Slotted+Pozidriv Thread Forming Coarse Screw" translation="" />
	<label commandName="Pan_Slotted+Pozidriv_Thread_Forming_Fine_Inch_Screw" devLabel="Pan Slotted+Pozidriv Thread Forming Fine Inch Screw" translation="" />
	<label commandName="Pan_Slotted+Pozidriv_Thread_Forming_Fine_Screw" devLabel="Pan Slotted+Pozidriv Thread Forming Fine Screw" translation="" />
	<label commandName="Pan_Slotted+Torx_Plus_Thread_Forming_Coarse_Inch_Screw" devLabel="Pan Slotted+Torx Plus Thread Forming Coarse Inch Screw" translation="" />
	<label commandName="Pan_Slotted+Torx_Plus_Thread_Forming_Coarse_Screw" devLabel="Pan Slotted+Torx Plus Thread Forming Coarse Screw" translation="" />
	<label commandName="Pan_Slotted+Torx_Plus_Thread_Forming_Fine_Inch_Screw" devLabel="Pan Slotted+Torx Plus Thread Forming Fine Inch Screw" translation="" />
	<label commandName="Pan_Slotted+Torx_Plus_Thread_Forming_Fine_Screw" devLabel="Pan Slotted+Torx Plus Thread Forming Fine Screw" translation="" />
	<label commandName="Pan_Slotted_Thread_Forming_Coarse_Inch_Screw" devLabel="Pan Slotted Thread Forming Coarse Inch Screw" translation="" />
	<label commandName="Pan_Slotted_Thread_Forming_Coarse_Screw" devLabel="Pan Slotted Thread Forming Coarse Screw" translation="" />
	<label commandName="Pan_Slotted_Thread_Forming_Fine_Inch_Screw" devLabel="Pan Slotted Thread Forming Fine Inch Screw" translation="" />
	<label commandName="Pan_Slotted_Thread_Forming_Fine_Screw" devLabel="Pan Slotted Thread Forming Fine Screw" translation="" />
	<label commandName="Pan_Torx_Plus_Thread_Forming_Coarse_Inch_Screw" devLabel="Pan Torx Plus Thread Forming Coarse Inch Screw" translation="" />
	<label commandName="Pan_Torx_Plus_Thread_Forming_Coarse_Screw" devLabel="Pan Torx Plus Thread Forming Coarse Screw" translation="" />
	<label commandName="Pan_Torx_Plus_Thread_Forming_Fine_Inch_Screw" devLabel="Pan Torx Plus Thread Forming Fine Inch Screw" translation="" />
	<label commandName="Pan_Torx_Plus_Thread_Forming_Fine_Screw" devLabel="Pan Torx Plus Thread Forming Fine Screw" translation="" />
	<label commandName="ParallelismTooltip" devLabel="Parallelism" translation="" />
	<label commandName="ParameterEditErrorStatus" devLabel="%1%" translation="" />
	<label commandName="ParameterUnitChangeNotAllowed" devLabel="Cannot change the unit type of the parameter" translation="" />
	<label commandName="ParentCompIsNotFastener" devLabel="Selected component is not a fastener." translation="" />
	<label commandName="Part_Number" devLabel="Part Number" translation="" />
	<label commandName="Part_Type" devLabel="Part Type" translation="" />
	<label commandName="PartingFaceSplitFailure" devLabel="Failed to split faces" translation="" />
	<label commandName="PartingLineFailure" devLabel="Failed to create parting lines" translation="" />
	<label commandName="PartingLineNonPlanarParting" devLabel="Split Solid Body mode only supports coplanar parting lines." translation="" />
	<label commandName="PartingSplitFailure" devLabel="Failed to split the body" translation="" />
	<label commandName="PartingSplittingSheetFailure" devLabel="Failed to create splitting surface" translation="" />
	<label commandName="PartingSurfaceExtendWarning" devLabel="Failed to extend parting surfaces" translation="" />
	<label commandName="PathPatternFeatureName" devLabel="PathPattern" translation="" />
	<label commandName="PatternCGCloneError" devLabel="Failed to clone construction geometries for pattern occurrence" translation="" />
	<label commandName="PatternCGInvalidOccurrenceParams" devLabel="Invalid parameters for construction geometry occurrence creation" translation="" />
	<label commandName="PatternCGInvalidTargetComponent" devLabel="Invalid target component for construction geometry pattern" translation="" />
	<label commandName="PatternCGNoTargetComponent" devLabel="Cannot find target component for construction geometry pattern" translation="" />
	<label commandName="PatternCGOccurrenceCreationError" devLabel="Failed to create construction geometry pattern occurrence" translation="" />
	<label commandName="PatternComputeError" devLabel="Cannot find source body for the pattern compute." translation="" />
	<label commandName="PatternInvalidData" devLabel="Invalid pattern data" translation="" />
	<label commandName="PatternReNameComponent" devLabel="(Pattern)" translation="" />
	<label commandName="PatternTransformError" devLabel="Failed to create pattern transforms" translation="" />
	<label commandName="PatternValidationCollinearAxes" devLabel="Pattern can't be created. The selected axes are collinear. Select axes that point in different directions." translation="" />
	<label commandName="PatternValidationCoplanarPlanes" devLabel="Pattern can't be created. The selected axes are coplanar. Select non-coplanar axes to define unique pattern directions." translation="" />
	<label commandName="Pattern_Feature_Input_Compute_Error" devLabel="Pattern Source Lost" translation="" />
	<label commandName="PerpendicularPlaneInsufficientInputs" devLabel="Perpendicular Plane failed: insufficient input geometry" translation="" />
	<label commandName="PerpendicularPlaneNoValidPlane" devLabel="Perpendicular Plane failed: reference plane not found" translation="" />
	<label commandName="PerpendicularityTooltip" devLabel="Perpendicularity" translation="" />
	<label commandName="PhysicalMaterialInheritToolTip_1" devLabel="Inherits the Physical Material from the parent component that contains this object." translation="" />
	<label commandName="PhysicalMaterialInheritToolTip_2" devLabel="If the Physical Material of the parent component changes, this updates to match." translation="" />
	<label commandName="PhysicalMaterialRootToolTip" devLabel="Current default Physical Material for &#10;" translation="" />
	<label commandName="PhysicalMaterialRule" devLabel="Physical Material Rule 1" translation="" />
	<label commandName="PhysicalMaterialStr" devLabel="Physical Material" translation="" />
	<label commandName="PipeDistance" devLabel="Distance" translation="" />
	<label commandName="PipeFeatureName" devLabel="Pipe" translation="" />
	<label commandName="PipeJointId" devLabel="Pipe EndType" translation="" />
	<label commandName="PipeJointsId" devLabel="Pipe EndTypes" translation="" />
	<label commandName="PipePathModified" devLabel="Pipe path is modified or deleted" translation="" />
	<label commandName="PipeSectionId" devLabel="Pipe Section" translation="" />
	<label commandName="PipeSectionsId" devLabel="Pipe Sections" translation="" />
	<label commandName="PipeSegmentId" devLabel="Pipe Segment" translation="" />
	<label commandName="PipeSegmentsId" devLabel="Pipe Segments" translation="" />
	<label commandName="PlasticFeatureRuleData" devLabel="Plastic Rule: " translation="" />
	<label commandName="PlasticRule" devLabel="Plastic Rule 1" translation="" />
	<label commandName="PlasticRuleName" devLabel="Rule Name" translation="" />
	<label commandName="PlasticRuleStr" devLabel="Plastic Rule" translation="" />
	<label commandName="PlasticRuleUnitsExpressionLineEdit1" devLabel="Please complete the expression" translation="" />
	<label commandName="PlasticRuleUnitsExpressionLineEdit2" devLabel="Please enter a valid expression" translation="" />
	<label commandName="PositionPointLabel" devLabel="Point %1% Position" translation="" />
	<label commandName="PositionTooltip" devLabel="Position" translation="" />
	<label commandName="ProjectSourceLost" devLabel="The project source is lost, Cache is used!" translation="" />
	<label commandName="ProjectSourceVectorLost" devLabel="The project direction line is lost, Cache is used!" translation="" />
	<label commandName="ProjectSurfaceLost" devLabel="The project surface is lost, Cache is used!" translation="" />
	<label commandName="ProjectToSurfaceComputeUtil_Fail01" devLabel="Failed to project the selected geometries. Please check that the project direction and selected faces are sensible, or try changing project type." translation="" />
	<label commandName="ProjectToSurfaceComputeUtil_Fail02" devLabel="Failed to project the selected geometries. Please check that the selected geometries and faces are sensible, or try changing project type." translation="" />
	<label commandName="ProjectToSurfaceComputeUtil_FailToProjectPartial" devLabel="&lt;b&gt;Cannot Project Curves&lt;/b&gt;&lt;br&gt;The geometry you selected could not be projected." translation="" />
	<label commandName="ProjectedToleranceTooltip" devLabel="Project Tolerance" translation="" />
	<label commandName="PropNameDescription" devLabel="Description" translation="" />
	<label commandName="PropNamePartNumber" devLabel="Part Number" translation="" />
	<label commandName="PropertiesStr" devLabel="Properties" translation="" />
	<label commandName="RADIUS_TOO_SMALL" devLabel="The radius is too small!" translation="" />
	<label commandName="RAD_BOSS_CONFLICT" devLabel="Radius should not be present on a boss." translation="" />
	<label commandName="RAD_PROPERTY_MISMATCH" devLabel="The Radius property is not valid. Please update the text or the Radius." translation="" />
	<label commandName="RAD_THRU_CONFLICT" devLabel="Radius and Through should not be present at the same time." translation="" />
	<label commandName="RAD_TOLERANCE_INVALID" devLabel="Invalid Radius tolerances." translation="" />
	<label commandName="RAD_ZERO" devLabel="Radius is present but zero." translation="" />
	<label commandName="RECTANGULAR_PATTERN_MISSING_OBJECTS_OR_AXES" devLabel="Missing objects or axes" translation="" />
	<label commandName="REFOLD_NO_BODY_INPUT" devLabel="It looks like the sheet metal body was removed. Undo the features or delete the features in the timeline to refold. You can also delete the unfold feature to return to the folded state." translation="" />
	<label commandName="REFOLD_NO_VALID_INPUT" devLabel="Failed to refold the body. Please provide a valid input." translation="" />
	<label commandName="RELATIVE_POSITION_LOST" devLabel="Fails to get associated relative position" translation="" />
	<label commandName="REORIENT_PRIMARY_AXIS_MISSING" devLabel="The reoriented primary axis selection is missing." translation="" />
	<label commandName="REORIENT_SECONDARY_AXIS_MISSING" devLabel="The reoriented secondary axis selection is missing." translation="" />
	<label commandName="REPLACE_FACE_TARGET_LOST" devLabel="The target face is lost" translation="" />
	<label commandName="REPLACE_FACE_TOOL_LOST" devLabel="The source face is lost" translation="" />
	<label commandName="REPLACE_WITH_PRIMITIVE_OUT_OF_DATE" devLabel="Replace with Primitives Feature is out of date." translation="" />
	<label commandName="REST_DIFFERENT_PLANES" devLabel="Cannot create rest feature when the selected sketch profiles are on different planes.&#10;Select sketch profiles that are on the same plane." translation="" />
	<label commandName="REST_EXTRUSION_FAILED" devLabel="Cannot create rest feature with the current sketch profile.&#10;Select a different closed sketch profile, adjust the sketch profile, or change the Extent Type." translation="" />
	<label commandName="REST_EXT_BOOLEAN_FAIL" devLabel="Cannot create rest feature up to the selected object.&#10;Select a different object to create the rest to (body, face, plane, or vertex)." translation="" />
	<label commandName="REST_HEIGHT_THICKNESS_FAILURE" devLabel="Cannot create rest feature because the thickness value is too large relative to the rest height.&#10;Adjust the Thickness." translation="" />
	<label commandName="REST_NO_TARGET_BODY" devLabel="Cannot create rest feature because no solid body is selected.&#10;Select a solid body." translation="" />
	<label commandName="REST_NO_TARGET_COMPONENT_BODY_DC" devLabel="A solid body is missing. Edit the Rest feature to reselect a missing body." translation="" />
	<label commandName="REST_PROFILE_REFERENCE_LOST" devLabel="One or more closed sketch profiles are missing. Edit the Rest feature to reselect missing closed sketch profiles." translation="" />
	<label commandName="REST_SKETCH_FAILURE" devLabel="Cannot create rest feature from the selected profile.&#10;Select a different closed sketch profile, or adjust the sketch profile." translation="" />
	<label commandName="REST_ZERO_DISTANCE_ERROR" devLabel="Cannot create rest feature with a Thickness value equal to 0.&#10;Adjust the Thickness to a positive value or change the Extent Type." translation="" />
	<label commandName="REVOLVE_INVALID_AXIS" devLabel="Axis is invalid" translation="" />
	<label commandName="RIB_DRAFT_FAIL" devLabel="The draft cannot be created." translation="" />
	<label commandName="RIB_FILLET_FAIL" devLabel="The fillet cannot be created with that radius." translation="" />
	<label commandName="RIGID_GROUP_OPERAND_LOST" devLabel="Rigid group operands are missing" translation="" />
	<label commandName="RIP_AMBIGUOUS_INPUTS" devLabel="Cannot compute Rip feature because the selected geometry has been modified.&#10;Inspect upstream features in the Timeline and restore any modified reference geometry, or edit the Rip feature and select new geometry." translation="" />
	<label commandName="RIP_MISSING_INPUTS" devLabel="Cannot compute Rip feature because the selected geometry is missing.&#10;Inspect upstream features and restore any deleted or modified geometry, or edit the Rip feature and select new geometry." translation="" />
	<label commandName="RIP_NOT_TANGENT_CONTINUOUS" devLabel="The input edge for rip is not tangent continuous." translation="" />
	<label commandName="RIP_NO_SHEET_METAL_DATA" devLabel="No sheet metal data found." translation="" />
	<label commandName="RIP_NO_TARGET_COMPONENT" devLabel="No target component." translation="" />
	<label commandName="RIP_UNABLE_TO_CREATE_PATH" devLabel="Cannot create a path between the two selected points.&#10;Adjust the point locations." translation="" />
	<label commandName="RPatternFeatureName" devLabel="R-Pattern" translation="" />
	<label commandName="RULED_SURFACE_INVALID_ANGLE" devLabel="Cannot set angle value to 90 degrees. Adjust angle value." translation="" />
	<label commandName="RULED_SURFACE_NO_INPUT" devLabel="Cannot find input geometry. Edit the feature to reselect lost inputs." translation="" />
	<label commandName="RadiusPointLabel" devLabel="Point %1% Radius" translation="" />
	<label commandName="ReadOnlyDesignAsset" devLabel="The design asset supplied for compute is read-only. Compute cannot be done." translation="" />
	<label commandName="Reconstruction_prefix" devLabel="Reconstructed-" translation="" />
	<label commandName="RectangularPatternConfig" devLabel="Rectangular Pattern" translation="" />
	<label commandName="RedirectProblem" devLabel="Could not redirect the target file %1% to the _XRef_ location" translation="" />
	<label commandName="RefDataMiss" devLabel="missing" translation="" />
	<label commandName="RefDim1" devLabel="Distance 1" translation="" />
	<label commandName="RefDim2" devLabel="Distance 2" translation="" />
	<label commandName="RefdDesignDeepUpdateFail" devLabel="Failed to Deep Update Refd Design from path: %1% in context of assembly." translation="" />
	<label commandName="RefdDesignPostDeepUpdateFail" devLabel="Failed to execute Post DeepUpdate on Refd Design from path: %1% in context of assembly." translation="" />
	<label commandName="ReferenceComponentName" devLabel="Assembly Reference" translation="" />
	<label commandName="ReferenceFeatureRef_NoReferenceFeature" devLabel="Reference feature is not available for rollback." translation="" />
	<label commandName="ReferenceGeometryChanged" devLabel="The reference geometry has been modified or moved.&#10;&#10;Please edit the failed features in the timeline and reselect the reference geometry." translation="" />
	<label commandName="RelationshipMissingReference" devLabel="Update of Relationship geometry failed." translation="" />
	<label commandName="ReloadDocumentCannotFetch" devLabel="Could not fetch the latest version of the document" translation="" />
	<label commandName="ReloadDocumentCannotFetch_ccy" devLabel="Could not retrieve the latest change of the document" translation="" />
	<label commandName="ReloadDocumentCannotOpen" devLabel="Could not reload the latest version of the document" translation="" />
	<label commandName="ReloadDocumentCannotOpen_ccy" devLabel="Could not reload the latest changes to the design." translation="" />
	<label commandName="ReplaceWithPrimitiveFeature" devLabel="Replace With Primitive" translation="" />
	<label commandName="ReplaceWithPrimitivesRequest_Rename" devLabel="Simplified Primitive" translation="" />
	<label commandName="RequestValidateInputError" devLabel="Some input argument is invalid." translation="" />
	<label commandName="RequireSaveBeforeInsert" devLabel="Save this design before inserting components." translation="" />
	<label commandName="ResetPMIStateRequestInvalidAnnotation" devLabel="Invalid annotation" translation="" />
	<label commandName="ResetPMIStateRequestInvalidGeometry" devLabel="No valid geometry for annotation" translation="" />
	<label commandName="ResetPMIStateRequestMultipleAssets" devLabel="Annotations must be from the same asset" translation="" />
	<label commandName="ResolveProblem" devLabel="Could not resolve the latest version of the target document. To-Path: %1%!!" translation="" />
	<label commandName="ResolveProblem2" devLabel="Could not resolve the latest version of the target document. From-Path: %1%, To-Path: %2%!!" translation="" />
	<label commandName="ResolveProblem2_ccy" devLabel="Could not resolve the latest changes to the target design.&#10; From-Path: %1%,&#10; To-Path: %2%!!" translation="" />
	<label commandName="ResolveProblem_Offline" devLabel="Cannot update some components because Fusion is in offline mode and the documents are currently unavailable.&lt;br&gt;&lt;b&gt;Try again when Fusion is back in online mode.&lt;/b&gt;" translation="" />
	<label commandName="ResolveProblem_ccy" devLabel="Could not resolve the latest changes to the target design.&#10; To-Path: %1%!!" translation="" />
	<label commandName="RestFeatureName" devLabel="Rest" translation="" />
	<label commandName="RestTransfromError" devLabel="Profile transformation failed." translation="" />
	<label commandName="RestructureBodiesBreakGeometricAlignment" devLabel="The Following Assembly Relationship was broken because the reference bodies used in the relationship belong to the same component, and not all have been restructured /n&lt;ul&gt;%1%&lt;/ul&gt;" translation="" />
	<label commandName="ResultsLegendConfiguration_BarSmall" devLabel="Bar - Small" translation="" />
	<label commandName="RevolveFeatureName" devLabel="Revolve" translation="" />
	<label commandName="RevolveNoProfileError" devLabel="There was an issue with the selected profile(s)" translation="" />
	<label commandName="Rib" devLabel="No target component." translation="" />
	<label commandName="RibComputeError" devLabel="Fail to compute rib profile!" translation="" />
	<label commandName="RibComputeFailed" devLabel="Rib compute failed" translation="" />
	<label commandName="RibFeatureName" devLabel="Rib" translation="" />
	<label commandName="RigidSubAssemblyTooltip" devLabel="%1%&lt;br&gt;&lt;br&gt;%2% is a Rigid Subassembly." translation="" />
	<label commandName="Rip" devLabel="No target component." translation="" />
	<label commandName="RipBetweenPointsNoSharedFace" devLabel="The two rip points do not share a common face." translation="" />
	<label commandName="RipRequestNoTargetComponent" devLabel="No target component." translation="" />
	<label commandName="Round" devLabel="Round" translation="" />
	<label commandName="Round With Radius" devLabel="Round With Radius" translation="" />
	<label commandName="Round_Hex_Thread_Forming_Coarse_Inch_Screw" devLabel="Round Hex Thread Forming Coarse Inch Screw" translation="" />
	<label commandName="Round_Hex_Thread_Forming_Coarse_Screw" devLabel="Round Hex Thread Forming Coarse Screw" translation="" />
	<label commandName="Round_Hex_Thread_Forming_Fine_Inch_Screw" devLabel="Round Hex Thread Forming Fine Inch Screw" translation="" />
	<label commandName="Round_Hex_Thread_Forming_Fine_Screw" devLabel="Round Hex Thread Forming Fine Screw" translation="" />
	<label commandName="Round_Phillips_Thread_Forming_Coarse_Inch_Screw" devLabel="Round Phillips Thread Forming Coarse Inch Screw" translation="" />
	<label commandName="Round_Phillips_Thread_Forming_Coarse_Screw" devLabel="Round Phillips Thread Forming Coarse Screw" translation="" />
	<label commandName="Round_Phillips_Thread_Forming_Fine_Inch_Screw" devLabel="Round Phillips Thread Forming Fine Inch Screw" translation="" />
	<label commandName="Round_Phillips_Thread_Forming_Fine_Screw" devLabel="Round Phillips Thread Forming Fine Screw" translation="" />
	<label commandName="Round_Pozidriv_Thread_Forming_Coarse_Inch_Screw" devLabel="Round Pozidriv Thread Forming Coarse Inch Screw" translation="" />
	<label commandName="Round_Pozidriv_Thread_Forming_Coarse_Screw" devLabel="Round Pozidriv Thread Forming Coarse Screw" translation="" />
	<label commandName="Round_Pozidriv_Thread_Forming_Fine_Inch_Screw" devLabel="Round Pozidriv Thread Forming Fine Inch Screw" translation="" />
	<label commandName="Round_Pozidriv_Thread_Forming_Fine_Screw" devLabel="Round Pozidriv Thread Forming Fine Screw" translation="" />
	<label commandName="Round_Security_Torx_Plus_Thread_Forming_Coarse_Inch_Screw" devLabel="Round Security Torx Plus Thread Forming Coarse Inch Screw" translation="" />
	<label commandName="Round_Security_Torx_Plus_Thread_Forming_Coarse_Screw" devLabel="Round Security Torx Plus Thread Forming Coarse Screw" translation="" />
	<label commandName="Round_Security_Torx_Plus_Thread_Forming_Fine_Inch_Screw" devLabel="Round Security Torx Plus Thread Forming Fine Inch Screw" translation="" />
	<label commandName="Round_Security_Torx_Plus_Thread_Forming_Fine_Screw" devLabel="Round Security Torx Plus Thread Forming Fine Screw" translation="" />
	<label commandName="Round_Slotted+Phillips_Thread_Forming_Coarse_Inch_Screw" devLabel="Round Slotted+Phillips Thread Forming Coarse Inch Screw" translation="" />
	<label commandName="Round_Slotted+Phillips_Thread_Forming_Coarse_Screw" devLabel="Round Slotted+Phillips Thread Forming Coarse Screw" translation="" />
	<label commandName="Round_Slotted+Phillips_Thread_Forming_Fine_Inch_Screw" devLabel="Round Slotted+Phillips Thread Forming Fine Inch Screw" translation="" />
	<label commandName="Round_Slotted+Phillips_Thread_Forming_Fine_Screw" devLabel="Round Slotted+Phillips Thread Forming Fine Screw" translation="" />
	<label commandName="Round_Slotted+Pozidriv_Thread_Forming_Coarse_Inch_Screw" devLabel="Round Slotted+Pozidriv Thread Forming Coarse Inch Screw" translation="" />
	<label commandName="Round_Slotted+Pozidriv_Thread_Forming_Coarse_Screw" devLabel="Round Slotted+Pozidriv Thread Forming Coarse Screw" translation="" />
	<label commandName="Round_Slotted+Pozidriv_Thread_Forming_Fine_Inch_Screw" devLabel="Round Slotted+Pozidriv Thread Forming Fine Inch Screw" translation="" />
	<label commandName="Round_Slotted+Pozidriv_Thread_Forming_Fine_Screw" devLabel="Round Slotted+Pozidriv Thread Forming Fine Screw" translation="" />
	<label commandName="Round_Slotted+Torx_Plus_Thread_Forming_Coarse_Inch_Screw" devLabel="Round Slotted+Torx Plus Thread Forming Coarse Inch Screw" translation="" />
	<label commandName="Round_Slotted+Torx_Plus_Thread_Forming_Coarse_Screw" devLabel="Round Slotted+Torx Plus Thread Forming Coarse Screw" translation="" />
	<label commandName="Round_Slotted+Torx_Plus_Thread_Forming_Fine_Inch_Screw" devLabel="Round Slotted+Torx Plus Thread Forming Fine Inch Screw" translation="" />
	<label commandName="Round_Slotted+Torx_Plus_Thread_Forming_Fine_Screw" devLabel="Round Slotted+Torx Plus Thread Forming Fine Screw" translation="" />
	<label commandName="Round_Slotted_Thread_Forming_Coarse_Inch_Screw" devLabel="Round Slotted Thread Forming Coarse Inch Screw" translation="" />
	<label commandName="Round_Slotted_Thread_Forming_Coarse_Screw" devLabel="Round Slotted Thread Forming Coarse Screw" translation="" />
	<label commandName="Round_Slotted_Thread_Forming_Fine_Inch_Screw" devLabel="Round Slotted Thread Forming Fine Inch Screw" translation="" />
	<label commandName="Round_Slotted_Thread_Forming_Fine_Screw" devLabel="Round Slotted Thread Forming Fine Screw" translation="" />
	<label commandName="Round_Torx_Plus_Thread_Forming_Coarse_Inch_Screw" devLabel="Round Torx Plus Thread Forming Coarse Inch Screw" translation="" />
	<label commandName="Round_Torx_Plus_Thread_Forming_Coarse_Screw" devLabel="Round Torx Plus Thread Forming Coarse Screw" translation="" />
	<label commandName="Round_Torx_Plus_Thread_Forming_Fine_Inch_Screw" devLabel="Round Torx Plus Thread Forming Fine Inch Screw" translation="" />
	<label commandName="Round_Torx_Plus_Thread_Forming_Fine_Screw" devLabel="Round Torx Plus Thread Forming Fine Screw" translation="" />
	<label commandName="Round_Washer_Hex_Thread_Forming_Coarse_Inch_Screw" devLabel="Round Washer Hex Thread Forming Coarse Inch Screw" translation="" />
	<label commandName="Round_Washer_Hex_Thread_Forming_Coarse_Screw" devLabel="Round Washer Hex Thread Forming Coarse Screw" translation="" />
	<label commandName="Round_Washer_Hex_Thread_Forming_Fine_Inch_Screw" devLabel="Round Washer Hex Thread Forming Fine Inch Screw" translation="" />
	<label commandName="Round_Washer_Hex_Thread_Forming_Fine_Screw" devLabel="Round Washer Hex Thread Forming Fine Screw" translation="" />
	<label commandName="Round_Washer_Phillips_Thread_Forming_Coarse_Inch_Screw" devLabel="Round Washer Phillips Thread Forming Coarse Inch Screw" translation="" />
	<label commandName="Round_Washer_Phillips_Thread_Forming_Coarse_Screw" devLabel="Round Washer Phillips Thread Forming Coarse Screw" translation="" />
	<label commandName="Round_Washer_Phillips_Thread_Forming_Fine_Inch_Screw" devLabel="Round Washer Phillips Thread Forming Fine Inch Screw" translation="" />
	<label commandName="Round_Washer_Phillips_Thread_Forming_Fine_Screw" devLabel="Round Washer Phillips Thread Forming Fine Screw" translation="" />
	<label commandName="Round_Washer_Pozidriv_Thread_Forming_Coarse_Inch_Screw" devLabel="Round Washer Pozidriv Thread Forming Coarse Inch Screw" translation="" />
	<label commandName="Round_Washer_Pozidriv_Thread_Forming_Coarse_Screw" devLabel="Round Washer Pozidriv Thread Forming Coarse Screw" translation="" />
	<label commandName="Round_Washer_Pozidriv_Thread_Forming_Fine_Inch_Screw" devLabel="Round Washer Pozidriv Thread Forming Fine Inch Screw" translation="" />
	<label commandName="Round_Washer_Pozidriv_Thread_Forming_Fine_Screw" devLabel="Round Washer Pozidriv Thread Forming Fine Screw" translation="" />
	<label commandName="Round_Washer_Security_Torx_Plus_Thread_Forming_Coarse_Inch_Screw" devLabel="Round Washer Security Torx Plus Thread Forming Coarse Inch Screw" translation="" />
	<label commandName="Round_Washer_Security_Torx_Plus_Thread_Forming_Coarse_Screw" devLabel="Round Washer Security Torx Plus Thread Forming Coarse Screw" translation="" />
	<label commandName="Round_Washer_Security_Torx_Plus_Thread_Forming_Fine_Inch_Screw" devLabel="Round Washer Security Torx Plus Thread Forming Fine Inch Screw" translation="" />
	<label commandName="Round_Washer_Security_Torx_Plus_Thread_Forming_Fine_Screw" devLabel="Round Washer Security Torx Plus Thread Forming Fine Screw" translation="" />
	<label commandName="Round_Washer_Slotted+Phillips_Thread_Forming_Coarse_Inch_Screw" devLabel="Round Washer Slotted+Phillips Thread Forming Coarse Inch Screw" translation="" />
	<label commandName="Round_Washer_Slotted+Phillips_Thread_Forming_Coarse_Screw" devLabel="Round Washer Slotted+Phillips Thread Forming Coarse Screw" translation="" />
	<label commandName="Round_Washer_Slotted+Phillips_Thread_Forming_Fine_Inch_Screw" devLabel="Round Washer Slotted+Phillips Thread Forming Fine Inch Screw" translation="" />
	<label commandName="Round_Washer_Slotted+Phillips_Thread_Forming_Fine_Screw" devLabel="Round Washer Slotted+Phillips Thread Forming Fine Screw" translation="" />
	<label commandName="Round_Washer_Slotted+Pozidriv_Thread_Forming_Coarse_Inch_Screw" devLabel="Round Washer Slotted+Pozidriv Thread Forming Coarse Inch Screw" translation="" />
	<label commandName="Round_Washer_Slotted+Pozidriv_Thread_Forming_Coarse_Screw" devLabel="Round Washer Slotted+Pozidriv Thread Forming Coarse Screw" translation="" />
	<label commandName="Round_Washer_Slotted+Pozidriv_Thread_Forming_Fine_Inch_Screw" devLabel="Round Washer Slotted+Pozidriv Thread Forming Fine Inch Screw" translation="" />
	<label commandName="Round_Washer_Slotted+Pozidriv_Thread_Forming_Fine_Screw" devLabel="Round Washer Slotted+Pozidriv Thread Forming Fine Screw" translation="" />
	<label commandName="Round_Washer_Slotted+Torx_Plus_Thread_Forming_Coarse_Inch_Screw" devLabel="Round Washer Slotted+Torx Plus Thread Forming Coarse Inch Screw" translation="" />
	<label commandName="Round_Washer_Slotted+Torx_Plus_Thread_Forming_Coarse_Screw" devLabel="Round Washer Slotted+Torx Plus Thread Forming Coarse Screw" translation="" />
	<label commandName="Round_Washer_Slotted+Torx_Plus_Thread_Forming_Fine_Inch_Screw" devLabel="Round Washer Slotted+Torx Plus Thread Forming Fine Inch Screw" translation="" />
	<label commandName="Round_Washer_Slotted+Torx_Plus_Thread_Forming_Fine_Screw" devLabel="Round Washer Slotted+Torx Plus Thread Forming Fine Screw" translation="" />
	<label commandName="Round_Washer_Slotted_Thread_Forming_Coarse_Inch_Screw" devLabel="Round Washer Slotted Thread Forming Coarse Inch Screw" translation="" />
	<label commandName="Round_Washer_Slotted_Thread_Forming_Coarse_Screw" devLabel="Round Washer Slotted Thread Forming Coarse Screw" translation="" />
	<label commandName="Round_Washer_Slotted_Thread_Forming_Fine_Inch_Screw" devLabel="Round Washer Slotted Thread Forming Fine Inch Screw" translation="" />
	<label commandName="Round_Washer_Slotted_Thread_Forming_Fine_Screw" devLabel="Round Washer Slotted Thread Forming Fine Screw" translation="" />
	<label commandName="Round_Washer_Torx_Plus_Thread_Forming_Coarse_Inch_Screw" devLabel="Round Washer Torx Plus Thread Forming Coarse Inch Screw" translation="" />
	<label commandName="Round_Washer_Torx_Plus_Thread_Forming_Coarse_Screw" devLabel="Round Washer Torx Plus Thread Forming Coarse Screw" translation="" />
	<label commandName="Round_Washer_Torx_Plus_Thread_Forming_Fine_Inch_Screw" devLabel="Round Washer Torx Plus Thread Forming Fine Inch Screw" translation="" />
	<label commandName="Round_Washer_Torx_Plus_Thread_Forming_Fine_Screw" devLabel="Round Washer Torx Plus Thread Forming Fine Screw" translation="" />
	<label commandName="RowNotExist" devLabel="The Configuration to be activated doesn't exist in the Configured Design" translation="" />
	<label commandName="RowRemoveFailed" devLabel="Row removal failed" translation="" />
	<label commandName="RowRenameFailedMessage" devLabel="Cannot rename &lt;b&gt;%1%&lt;/b&gt; to &lt;b&gt;%2%&lt;/b&gt;. Try renaming the Configuration again." translation="" />
	<label commandName="RowRenameFailedTitle" devLabel="Configuration rename failed" translation="" />
	<label commandName="Rule" devLabel="%1% Rule 1" translation="" />
	<label commandName="RuleName" devLabel="Rule Name" translation="" />
	<label commandName="RuleUnitsExpressionLineEdit1" devLabel="Please complete the expression" translation="" />
	<label commandName="RuleUnitsExpressionLineEdit2" devLabel="Please enter a valid expression" translation="" />
	<label commandName="RuleUnitsExpressionLineEdit3" devLabel="For Round relief, relief depth value should be greater than or equal to 1/2 of relief width value" translation="" />
	<label commandName="RunningRuleForRowNameSyncDescription" devLabel="This Configuration Name changed since the last time you saved the Configured Design.&lt;br&gt;&lt;br&gt;A Configuration Rule uses the name to drive one or more values in this configuration. The rule changes are applied now and need to be saved." translation="" />
	<label commandName="SCULPT_BUILD_CELLS_FAILED" devLabel="Failed to build cells." translation="" />
	<label commandName="SCULPT_CELL_MISMATCHED" devLabel="Some sculpt cells are mismatched." translation="" />
	<label commandName="SCULPT_CREATE_BODY_FROM_CELL" devLabel="Failed to create bodies from cells." translation="" />
	<label commandName="SCULPT_MAKE_FACE_FROM_PLANE" devLabel="Failed to make sheet face from work plane." translation="" />
	<label commandName="SDReplaceColumnName" devLabel="%1%:%2% (Component Insert)" translation="" />
	<label commandName="SDReplaceUserColumnName" devLabel="%1% (Component Insert)" translation="" />
	<label commandName="SELECTED_HOLE_BOSS_CHANGED" devLabel="The annotation has been updated because the hole or boss geometry has changed. " translation="" />
	<label commandName="SHAFT_TOLERANCE_INVALID" devLabel="Shaft tolerances invalid." translation="" />
	<label commandName="SHELL_GENERIC_FAILURE" devLabel="The shell can not be created at this thickness.&#10;Try adjusting the Thickness, the selection set,&#10;or change the Shell Type." translation="" />
	<label commandName="SHELL_PARTIAL_RESULT_GENERATED" devLabel="Shell could not complete. Partial result has been returned instead." translation="" />
	<label commandName="SKETCH_MISFIT_EDGE_ENTITY" devLabel="Misfit edge entity" translation="" />
	<label commandName="SKETCH_MISFIT_VERTEX_ENTITY" devLabel="Misfit vertex entity" translation="" />
	<label commandName="SKETCH_SOLVER_NO_SOLUTION_FOUND" devLabel="Solver did not reach a solution" translation="" />
	<label commandName="SMBadRGWarning" devLabel="Rigid group not created. Select at least one component." translation="" />
	<label commandName="SMBendFeatAngleConfig" devLabel="Bend Angle" translation="" />
	<label commandName="SMEdgeSelectionCategory" devLabel="Sheet Metal Body Edges" translation="" />
	<label commandName="SMFaceSelectionCategory" devLabel="Sheet Metal Body Faces" translation="" />
	<label commandName="SMRGCreationFailed" devLabel="Rigid group could not be automatically created using the bounding solid component and the input components." translation="" />
	<label commandName="SMRuleNotActivated" devLabel="Could not set the Rule as Default." translation="" />
	<label commandName="SMRuleNotCloned" devLabel="Could not duplicate a Rule." translation="" />
	<label commandName="SMRuleNotDeleted" devLabel="Could not delete a Rule as some component is using it or the Rule does not exist." translation="" />
	<label commandName="SMRuleNotUpdated" devLabel="Could not update a Rule." translation="" />
	<label commandName="SM_UNFOLDER_REPLACEMENT_WARNING" devLabel="Cannot create Flat Pattern because the Relief Radius at one or more 3-Bend Corners is smaller than the thickness of the sheet metal material.&#10;Edit Flange and Bend features in the timeline to override the Relief Shape to any option besides Round With Radius, or override the Relief Radius to a larger value. Alternatively, edit the Sheet Metal Rule to adjust the Relief Shape throughout the design or switch to a Sheet Metal Rule with a thinner material." translation="" />
	<label commandName="SNAPFIT_ALIGN_DIRECTION_INVALID_VALUE" devLabel="Alignment axis is parallel to sketch axis." translation="" />
	<label commandName="SNAPFIT_GEOMETRY_UNEXPECTED" devLabel="Snap fit feature inputs result in unexpected geometry. Please inspect feature inputs." translation="" />
	<label commandName="SNAPFIT_GROOVE_DOESNT_MODFIY" devLabel="Groove doesn't modify the body." translation="" />
	<label commandName="SNAPFIT_GROOVE_FILLET_FAILED" devLabel="Groove fillet failed. Please try to decrease the fillet radius." translation="" />
	<label commandName="SNAPFIT_GROOVE_RAMP_FAILED" devLabel="Groove ramp failed. Please try to decrease the size." translation="" />
	<label commandName="SNAPFIT_HOOK_ROOT_FILLET_FAILED" devLabel="Root fillet failed. Please try to decrease the fillet radius." translation="" />
	<label commandName="SNAPFIT_HOOK_ROOT_FILLET_TOO_MANY_EDGES_FAILED" devLabel="Root fillet failed. Multiple edges at root." translation="" />
	<label commandName="SNAPFIT_INVALID_PARAMETER_VALUE" devLabel="Parameter value of the feature is incorrect. Please inspect the parameters." translation="" />
	<label commandName="SNAPFIT_MULTIPLE_BODY_ERR" devLabel="Cannot create Snap fit feature because it would change the number of bodies.&#10;Adjust the snap fit settings so that that the feature will be connected to the body or not split the body." translation="" />
	<label commandName="SNAPFIT_NO_TARGET_FOR_POINTS" devLabel="Snap fit feature could not find the target body for the points." translation="" />
	<label commandName="SNAPFIT_PROFILE_FAILED" devLabel="Failed to build snap fit profile. Please inspect inputs." translation="" />
	<label commandName="SNAPFIT_UNDERCUT_INVALID_PARAMETER_VALUE" devLabel="Failed to build undercut. Please inspect parameters." translation="" />
	<label commandName="SNAPSHOT_NOTHING_CHANGE" devLabel="Capture Position has no positions for current Components and Joints" translation="" />
	<label commandName="SOURCE_BODY_LOST" devLabel="Source body not found!" translation="" />
	<label commandName="SOURCE_INSTANCE_LOST" devLabel="Paste instance source occurrence context is lost" translation="" />
	<label commandName="SOURCE_MODEL_NOT_AVAILABLE" devLabel="The source design was unavailable during compute. Cached data will be used." translation="" />
	<label commandName="SPHERE_CREATE_SPHERE_FAILED" devLabel="Failed to build sphere tool body." translation="" />
	<label commandName="SPHERE_DIAMETER_VALUE_INVALID" devLabel="The sphere diameter is invalid." translation="" />
	<label commandName="SPLIT_FACE_TOOL_BODIES_CREATE_FAIL" devLabel="Tool bodies creation failed for split operation." translation="" />
	<label commandName="SPLIT_NO_TARGET_FACES" devLabel="No target faces for executing face split." translation="" />
	<label commandName="SPLIT_TARGET_TOOL_NOT_INTERSECT" devLabel="No intersection between target(s) and split tool." translation="" />
	<label commandName="SPLIT_TOOL_INTERSECTING_SHEET" devLabel="There is unhandled intersecting tool data. Try without intersecting tools." translation="" />
	<label commandName="SPLIT_TOOL_NON_MANIFOLD_SOLID" devLabel="Coincident tools would create illegal or non-manufacturable bodies. Try with separate tools." translation="" />
	<label commandName="STOCK_MODEL_NO_SELECTION" devLabel="No model selected. Select a body or component to continue." translation="" />
	<label commandName="STOCK_MODEL_OUTER_LT_INNER" devLabel="Inner diameter cannot be larger or equal to outer diameter." translation="" />
	<label commandName="SameDecalError" devLabel="Same image file path" translation="" />
	<label commandName="SameReferencedDoc" devLabel="The referenced file being opened is the same as the one currently open. Path of file: %1%!!" translation="" />
	<label commandName="Sculpt" devLabel="No target component." translation="" />
	<label commandName="SculptComputeFailedErr" devLabel="Failed to compute sculpt!" translation="" />
	<label commandName="SculptFeatureName" devLabel="BoundaryFill" translation="" />
	<label commandName="SeashellIsoparmPatternExistsStandardizationIsImpossible" devLabel="Seashell isoparm pattern exists, standardization is impossible" translation="" />
	<label commandName="SectionRadius" devLabel="Section Size" translation="" />
	<label commandName="SectionSize" devLabel="Section Size" translation="" />
	<label commandName="SectionThickness" devLabel="Section Thickness" translation="" />
	<label commandName="SectionViewAnalysisDefaultUserName" devLabel="Section" translation="" />
	<label commandName="SelectBackFacets" devLabel="Select Back Faces" translation="" />
	<label commandName="SelectJOEdge1" devLabel="Select first edge" translation="" />
	<label commandName="SelectJOEdge2" devLabel="Select second edge" translation="" />
	<label commandName="SelectJOInputOriginComponent" devLabel="Select a Snap point to place the Joint Origin" translation="" />
	<label commandName="SelectJOPlane1" devLabel="Select first face" translation="" />
	<label commandName="SelectJOPlane2" devLabel="Select second face" translation="" />
	<label commandName="SelectedConfigurationStr" devLabel="Insert" translation="" />
	<label commandName="SelectedVerticesAreNotWithinWeldTolerance" devLabel="Selected vertices are not within weld tolerance" translation="" />
	<label commandName="SelectionInputBaseMeshBodyClientType" devLabel="Mesh Body" translation="" />
	<label commandName="SelectionInputMeshBodyClientType" devLabel="Mesh Body" translation="" />
	<label commandName="SelectionSetAsymmetricFillet" devLabel="Selection Set %1% (Asymmetric Fillet)" translation="" />
	<label commandName="SelectionSetChordRadius" devLabel="Selection Set %1% (Chord Radius)" translation="" />
	<label commandName="SelectionSetConstantRadius" devLabel="Selection Set %1% (Constant Radius)" translation="" />
	<label commandName="SelectionSetCustomConstraint" devLabel="Constraint %1%" translation="" />
	<label commandName="SelectionSetDistanceAndAngle" devLabel="Selection Set %1% (Distance And Angle)" translation="" />
	<label commandName="SelectionSetEqualDistance" devLabel="Selection Set %1% (Equal Distance)" translation="" />
	<label commandName="SelectionSetTwoDistance" devLabel="Selection Set %1% (Two Distance)" translation="" />
	<label commandName="SelectionSetVariableRadius" devLabel="Selection Set %1% (Variable Radius)" translation="" />
	<label commandName="SheetMetalBend" devLabel="No target component." translation="" />
	<label commandName="SheetMetalData" devLabel="Rule: " translation="" />
	<label commandName="SheetMetalRule" devLabel="Sheet Metal Rule 1" translation="" />
	<label commandName="SheetMetalRuleLibraryFeatureFlagDescription" devLabel="Enables the new shared library experience. It lets all Hub users work from the same set of sheet metal rules, helping keep standards consistent and unified. The updated library dialog also makes it easier to review and manage rules." translation="" />
	<label commandName="SheetMetalRuleLibraryFeatureFlagName" devLabel="Shared Sheet Metal Rules Library" translation="" />
	<label commandName="SheetMetalRuleStr" devLabel="Sheet Metal Rule" translation="" />
	<label commandName="ShellBodySelectionCategory" devLabel="Shell Bodies" translation="" />
	<label commandName="ShellBodySelectionId" devLabel="ShellBody" translation="" />
	<label commandName="ShellBody_DefaultName" devLabel="Shell" translation="" />
	<label commandName="ShellFeatureName" devLabel="Shell" translation="" />
	<label commandName="ShellManagerlabel" devLabel="Open Shell Manager" translation="" />
	<label commandName="ShellsManagerEntry" devLabel="Shell Manager" translation="" />
	<label commandName="SimAssetIsMissing" devLabel="Asset is missing" translation="" />
	<label commandName="SimMaxValueLabelFmt" devLabel="%1%%2% Max." translation="" />
	<label commandName="SimMinValueLabelFmt" devLabel="%1%%2% Min." translation="" />
	<label commandName="SimUnexpectedFailure" devLabel="Unexpected failure." translation="" />
	<label commandName="SimpleConversionFailed" devLabel="T-Spline conversion failed." translation="" />
	<label commandName="Simulation" devLabel="Simulation workspace" translation="" />
	<label commandName="SimulationModels" devLabel="Simulation Models" translation="" />
	<label commandName="SimulationWM" devLabel="Simulation" translation="" />
	<label commandName="Size_Designation" devLabel="Size Designation" translation="" />
	<label commandName="SketchAngularDimensionsConfig" devLabel="Angular Dimensions" translation="" />
	<label commandName="SketchConstraintHasSameConstraint" devLabel="Constraint has already been applied to the selected sketch object." translation="" />
	<label commandName="SketchConstraintHasSameDimension" devLabel="Already has same dimension on referenced geometry!" translation="" />
	<label commandName="SketchCustomGroupMoveFailed" devLabel="Sketch Group Move Operation Failed." translation="" />
	<label commandName="SketchDiameterDimensionsConfig" devLabel="Diameter Dimensions" translation="" />
	<label commandName="SketchInvisibleDimension" devLabel="The dimension you have just created is not visible. Please toggle Show Dimension option in sketch palette." translation="" />
	<label commandName="SketchInvisibleProjectGeometries" devLabel="The Projected Geometries you have just created is not visible. Please toggle Show Project Geometries option in sketch palette." translation="" />
	<label commandName="SketchLinearDimensionsConfig" devLabel="Linear Dimensions" translation="" />
	<label commandName="SketchPlaneLost" devLabel="The sketch plane is lost, Cache is used. Please redefine the sketch to select other plane!" translation="" />
	<label commandName="SketchProject" devLabel="Project" translation="" />
	<label commandName="SketchRadialDimensionsConfig" devLabel="Radial Dimensions" translation="" />
	<label commandName="SketchTangentDimensionConfig" devLabel="Tangent Dimensions" translation="" />
	<label commandName="SlideEdgeFailed" devLabel="Slide Edge operation failed with specific input edge set" translation="" />
	<label commandName="SlopeTooltip" devLabel="Slope" translation="" />
	<label commandName="SlottedCheeseHeadScrewDIN84" devLabel="Slotted Cheese Head Screw DIN 84" translation="" />
	<label commandName="SlottedCheeseHeadScrewISO1207" devLabel="Slotted Cheese Head Screw ISO 1207" translation="" />
	<label commandName="Slotted_Depth" devLabel="Slotted Depth" translation="" />
	<label commandName="Slotted_Width" devLabel="Slotted Width" translation="" />
	<label commandName="SmRuleCopyToLibraryStr" devLabel="Copy to Library" translation="" />
	<label commandName="SmoothSurfaceFailed" devLabel="Smooth surface operation failed" translation="" />
	<label commandName="SmoothingRateNotInRange" devLabel="The smoothing rate is not in range" translation="" />
	<label commandName="Snap" devLabel="Snap" translation="" />
	<label commandName="SnapFitFeatureName" devLabel="SnapFit" translation="" />
	<label commandName="SnapFitNoTargetComponent" devLabel="No target component." translation="" />
	<label commandName="SocketHeadCapScrew" devLabel="Socket Head Cap Screw" translation="" />
	<label commandName="SocketHeadCapScrewDINENISO4762" devLabel="Socket Head Cap Screw DIN EN ISO 4762" translation="" />
	<label commandName="SocketHeadCapScrewISO4762" devLabel="Socket Head Cap Screw ISO 4762" translation="" />
	<label commandName="SpunProfileComputeInvalidAxis" devLabel="Invalid axis object for spun profile" translation="" />
	<label commandName="SpunProfileComputeInvalidSource" devLabel="Invalid source object for spun profile" translation="" />
	<label commandName="SpunProfileComputeNoAxis" devLabel="No axis object selected for spun profile" translation="" />
	<label commandName="SpunProfileComputeNoSource" devLabel="No source objects for spun profile" translation="" />
	<label commandName="SpunProfileComputePerpendicularAxis" devLabel="Axis object for spun profile cannot be perpendicular to sketch plane" translation="" />
	<label commandName="SpunProfileComputeProjectAxisError" devLabel="Unable to calculate projected axis for spun profile" translation="" />
	<label commandName="SpunProfileFeatureComputeInvalidAxis" devLabel="Invalid axis object for spun profile" translation="" />
	<label commandName="SpunProfileFeatureComputeInvalidSource" devLabel="Invalid source object for spun profile" translation="" />
	<label commandName="Square" devLabel="Square" translation="" />
	<label commandName="SquarenessTooltip" devLabel="Squareness" translation="" />
	<label commandName="StandardDesignReplace_GeneralErrorMsg" devLabel="Cannot replace Standard Design. Make sure Fusion is online, then try again." translation="" />
	<label commandName="StitchTolerance" devLabel="Tolerance" translation="" />
	<label commandName="StockModelBodyCompute" devLabel="Failed to create the stock model body." translation="" />
	<label commandName="StockModelBodyCreate" devLabel="Failed to create the stock model body." translation="" />
	<label commandName="StockModelBoxPointSelectionId" devLabel="Box Point" translation="" />
	<label commandName="StockModelBoxPointSelectionsId" devLabel="Box Points" translation="" />
	<label commandName="StockModelDeleteFeature" devLabel="Can’t compute the feature due to corruption of legacy data. Delete the Bounding Solid feature and recreate it." translation="" />
	<label commandName="StockModelFeature" devLabel="Bounding Solid" translation="" />
	<label commandName="StockModelMoveFeature" devLabel="Bounding Solid Move" translation="" />
	<label commandName="StockModelNewCIName" devLabel="BoundingSolid" translation="" />
	<label commandName="Straight" devLabel="Straight" translation="" />
	<label commandName="StraightenFailed" devLabel="Failed to straighten the given points." translation="" />
	<label commandName="StraightnessTooltip" devLabel="Straightness" translation="" />
	<label commandName="SubDSurfaceDefaultUserName" devLabel="Body" translation="" />
	<label commandName="SubDSurfaceNodeSelectionId" devLabel="T-Spline Body" translation="" />
	<label commandName="SubDSurfaceNodeSelectionsId" devLabel="T-Spline Bodies" translation="" />
	<label commandName="SubDivideFailed" devLabel="Subdivide operation can be applied only on manifold Surfaces." translation="" />
	<label commandName="SubDivideFailedUnknown" devLabel="Subdivide operations failed." translation="" />
	<label commandName="SuppressOrDissolveWarning" devLabel="Deleted geometry is part of a pattern, suppressed the instance or dissolved the pattern." translation="" />
	<label commandName="Suppress_error" devLabel="No target feature" translation="" />
	<label commandName="Suppress_status_error" devLabel="Feature already suppressed/unsuppressed" translation="" />
	<label commandName="SurfaceAlreadySmoothAsPossible" devLabel="Surface is already as smooth as possible" translation="" />
	<label commandName="SurfaceMergeFailed" devLabel="Failed to merge surfaces" translation="" />
	<label commandName="SurfaceMergeFailedCopy" devLabel="Failed to copy tool body" translation="" />
	<label commandName="SurfaceMergeFailedToolBody" devLabel="Failed to copy tool body" translation="" />
	<label commandName="SurfaceOffsetDistance" devLabel="Distance" translation="" />
	<label commandName="SurfaceOffsetFeatureName" devLabel="SurfaceOffset" translation="" />
	<label commandName="SurfacePatchFeatureName" devLabel="SurfacePatch" translation="" />
	<label commandName="SurfaceProfileTooltip" devLabel="Surface Profile" translation="" />
	<label commandName="SurfaceRuledAngle" devLabel="Angle" translation="" />
	<label commandName="SurfaceRuledDistance" devLabel="Distance" translation="" />
	<label commandName="SurfaceRuledFeatureName" devLabel="SurfaceRuled" translation="" />
	<label commandName="SurfaceShellFeature" devLabel="SurfaceShell" translation="" />
	<label commandName="SurfaceShell_DefaultName" devLabel="SurfaceShell" translation="" />
	<label commandName="SurfaceStitch" devLabel="No target component." translation="" />
	<label commandName="SurfaceStitchFailed" devLabel="Failed to stitch merge body" translation="" />
	<label commandName="SurfaceThicken" devLabel="No target component." translation="" />
	<label commandName="SurfaceUnionFailed" devLabel="Failed to union to merge body" translation="" />
	<label commandName="SurfaceUntrimPatchInternalLoopsFailed" devLabel="Failed to patch internal loops." translation="" />
	<label commandName="SurfaceUntrimPatchUnionFailed" devLabel="Problem found in face loop geometry. Face cannot be untrimmed." translation="" />
	<label commandName="Sweep" devLabel="No target component." translation="" />
	<label commandName="SweepBodyFailedValidation" devLabel="The selected body is invalid for solid sweep. Please repair the body and try again." translation="" />
	<label commandName="SweepFeatureName" devLabel="Sweep" translation="" />
	<label commandName="SweepNoValidBody" devLabel="No valid body selected for solid sweep." translation="" />
	<label commandName="SweepProfileNonPlanarError" devLabel="The selected profile is non-planar. Parallel sweep requires a planar profile." translation="" />
	<label commandName="SweepProfilePlaneNotIntersecting" devLabel="The path does not intersect the profile. For best results, the path should intersect the profile." translation="" />
	<label commandName="SweepTaggingError" devLabel="Sweep creation failed. Try reselecting the inputs." translation="" />
	<label commandName="SwitchRuleSelectComponentTooltip" devLabel="Assign Plastic Rule&#10;&#10;Assign a different plastic rule to this component." translation="" />
	<label commandName="SwitchSheetMetalDataCommandTooltip" devLabel="Switch Rule" translation="" />
	<label commandName="SymmetryRemoved" devLabel="The symmetry applied to this T-Spline body will be removed as a result of this operation.  You can proceed or cancel the operation." translation="" />
	<label commandName="SymmetrySplit" devLabel="Surface failed to split due to symmetry. Use Clear Symmetry command to remove the symmetry." translation="" />
	<label commandName="SymmetryTooltip" devLabel="Symmetry" translation="" />
	<label commandName="SyncReferences_ChainUpdateBroke" devLabel="Assembly Reference is broken after updating referenced external component." translation="" />
	<label commandName="SyncReferences_ChainUpdateErr1" devLabel="%1% is no longer available after updating %2%." translation="" />
	<label commandName="SyncReferences_ChainUpdateErr2" devLabel="Cannot update referenced component while offline." translation="" />
	<label commandName="SyncReferences_ChainUpdateErr3" devLabel="Cannot update referenced external components." translation="" />
	<label commandName="SyncReferences_NoSyncAbort" devLabel="Cannot complete Sync All Assembly References command. Assembly References have not been synced." translation="" />
	<label commandName="SyncReferences_NoSyncCycle" devLabel="Assembly Reference contains a circular reference. Try syncing again. Circular references may not be able to sync completely." translation="" />
	<label commandName="SyncReferences_NoSyncSaveBlocked" devLabel="Cannot sync assembly references associated with external components that other project members are editing." translation="" />
	<label commandName="SyncReferences_NoSyncUnknown" devLabel="Try syncing again." translation="" />
	<label commandName="SyncReferences_ReservedBy" devLabel="%1% reserved by %2%." translation="" />
	<label commandName="SyncReferences_WasNotSynced" devLabel="Cannot sync assembly reference: " translation="" />
	<label commandName="TARGET_BODY_REFERENCE_LOST" devLabel="The target body is lost, try editing this feature to reselect target body." translation="" />
	<label commandName="TARGET_INSTANCE_LOST" devLabel="Paste instance target occurrence context is lost" translation="" />
	<label commandName="TARGET_OCCURRENCE_LOST" devLabel="Failed to get target occurrence transform" translation="" />
	<label commandName="TEXT_EMPTY" devLabel="The text cannot be empty." translation="" />
	<label commandName="TEXT_TOO_LONG" devLabel="The text is too long." translation="" />
	<label commandName="THDCD_THRC_MISSING" devLabel="Thread properties missing." translation="" />
	<label commandName="THDCD_THRC_PROPERTY_MISMATCH" devLabel="The Thread properties are not valid. Please update the text or the Thread information." translation="" />
	<label commandName="THICKEN_PARTIAL_RESULT_GENERATED" devLabel="Thicken could not complete. Partial result has been returned instead." translation="" />
	<label commandName="THICKEN_ZERO_THICKNESS_ERROR" devLabel="Cannot create thicken feature with a thickness value equal to 0.&#10;Adjust the thickness to a positive or negative value." translation="" />
	<label commandName="THRD_PROPERTY_MISMATCH" devLabel="The Thread Depth property is not valid. Please update the text or the Thread Depth." translation="" />
	<label commandName="THRD_TOLERANCE_INVALID" devLabel="Invalid Thread Depth tolerances." translation="" />
	<label commandName="THREADED_THROUGH_CONFLICT" devLabel="Threaded Through cannot be set to true without Through Hole being true." translation="" />
	<label commandName="THREAD_BUILD_HELIXPATH_FAILED" devLabel="Failed to build thread helix path." translation="" />
	<label commandName="THREAD_BUILD_PROFILE_FAILED" devLabel="Failed to build thread profile." translation="" />
	<label commandName="THREAD_CREATE_THREAD_BODY_FAILED" devLabel="Failed to build thread tool body." translation="" />
	<label commandName="THREAD_CUT_TOOL_FROM_TARGET_FAILED" devLabel="Failed to cut thread tool body from target body." translation="" />
	<label commandName="THREAD_DEPTH_CONFLICT" devLabel="Threaded Depth and Threaded Through should not be present at the same time." translation="" />
	<label commandName="THREAD_DEPTH_ZERO" devLabel="Thread depth is present but zero." translation="" />
	<label commandName="THREAD_FACE_NOT_IN_BODY" devLabel="The face selection is invalid.&#10;Any intersecting faces can be attempted separately." translation="" />
	<label commandName="THREAD_OVER_EXTENT" devLabel="Thread depth exceeds hole depth. Unable to create thread. Reduce thread depth or thread offset." translation="" />
	<label commandName="THREAD_REFERENCE_FACE_LOST" devLabel="Thread face reference is lost, try editing this feature to reselect the reference face." translation="" />
	<label commandName="THREAD_REFERENCE_FACE_OFFSET_FAILED" devLabel="Thread size is bigger than the body. Unable to create hole and thread. Reduce hole/thread size and try again." translation="" />
	<label commandName="THRU_HDPT_CONFLICT" devLabel="Through and Depth should not be present at the same time." translation="" />
	<label commandName="THRU_PROPERTY_MISMATCH" devLabel="The Through property is not valid. Please update the text or the Through Hole information." translation="" />
	<label commandName="TOOLBODY_CREATION_FAIL_ERROR" devLabel="Tool body creation failed" translation="" />
	<label commandName="TOOLBODY_CREATION_FAIL_WARNING" devLabel="Some profiles failed to create tool bodies" translation="" />
	<label commandName="TOOL_BODY_REFERENCE_LOST" devLabel="The tool body is lost, try editing this feature to reselect tool body." translation="" />
	<label commandName="TORUS_CREATE_TORUS_FAILED" devLabel="Failed to create torus solid body." translation="" />
	<label commandName="TORUS_MAJOR_DIAMETER_VALUE_INVALID" devLabel="The torus inner diameter is invalid." translation="" />
	<label commandName="TORUS_MINOR_DIAMETER_VALUE_INVALID" devLabel="The torus diameter is invalid." translation="" />
	<label commandName="TO_OBJECT_FACE_NOT_PLANAR" devLabel="The face selected for flange extension has been altered and is no longer planar.&#10;Edit Edge Flange and select a different flat face to extend to." translation="" />
	<label commandName="TO_OBJECT_PLANE_NOT_PARALLEL_TO_EDGE" devLabel="Flange extension is not possible. Object plane must be parallel to selected edge." translation="" />
	<label commandName="TRUpdateError" devLabel="Geometry used to define Transitional Relationship is missing" translation="" />
	<label commandName="TSPlineAddRefSymPlaneNotSel" devLabel="Plane not selected" translation="" />
	<label commandName="TSPlineBridgeInvalidSelection" devLabel="Bridge Failed. Invalid Selection" translation="" />
	<label commandName="TSpline2BRepConversionFailed" devLabel="The given T-Spline surface is invalid." translation="" />
	<label commandName="TSplineBodySelectionCategory" devLabel="T-Spline Body" translation="" />
	<label commandName="TSplineComputableActionFailure" devLabel="Computable Action Failure" translation="" />
	<label commandName="TSplineConversionFailed" devLabel="Failed to convert %1% to T-spline surface." translation="" />
	<label commandName="TSplineEdgeSelectionCategory" devLabel="T-Spline Edges" translation="" />
	<label commandName="TSplineEntitySelectionCategory" devLabel="T-Spline Geometry" translation="" />
	<label commandName="TSplineErrorMatchAdjustSample" devLabel="Match failure, you may be trying to adjust the curve ends on a non-periodic match or trying to adjust a non-vertex sample." translation="" />
	<label commandName="TSplineErrorMatchContinuityTypeInvalid" devLabel="Match failure, invalid or unsupported continuity type.  Please select a valid continuity type or try a positional (G0) match." translation="" />
	<label commandName="TSplineErrorMatchCurveInterfaceNull" devLabel="Match failure, null curve interface.  Internal error. Please try re-matching with different or newly created surfaces." translation="" />
	<label commandName="TSplineErrorMatchEdgeBeziers" devLabel="Match failure, can't get Bezier curves on edge.  Interal error. Please try re-matching with different or newly created surfaces." translation="" />
	<label commandName="TSplineErrorMatchEdgeChainEmpty" devLabel="Match failure, empty edge chain selected in either the T-Spline or target selections.  Please try re-selecting a non-empty edge chain." translation="" />
	<label commandName="TSplineErrorMatchEdgeChainInvalid" devLabel="Match failure, invalid edge chain selected in either the T-Spline or target selections.  Please try re-selecting a single contiguous edge chain." translation="" />
	<label commandName="TSplineErrorMatchEdgeChainMultiple" devLabel="Match failure, multiple edge chains selected in either the T-Spline or target selections.  Please try re-selecting a single edge chain." translation="" />
	<label commandName="TSplineErrorMatchEvalOrthoDerivs" devLabel="Match failure, the curve interface is incapable of evaluating orthogonal derivatives on the match target and a tangential (G1) or curvature (G2) match is requested.  Please try re-matching with a positional (G0) match." translation="" />
	<label commandName="TSplineErrorMatchInitRepairKnots" devLabel="Match failure, initialization failed due to T-Spline surface knot repairs.  Please try matching using a new or different T-Spline surface." translation="" />
	<label commandName="TSplineErrorMatchParamIndexInvalid" devLabel="Match failure, parameter index is invalid.  Internal error. Please try re-matching with different or newly created surfaces." translation="" />
	<label commandName="TSplineErrorMatchParamInitFailed" devLabel="Match failure, parameter initialization failed.  Internal error. Please try re-matching with different or newly created surfaces." translation="" />
	<label commandName="TSplineErrorMatchParameterDirectionInvalid" devLabel="Match failure, invalid or unsupported parametric direction.  Please try re-selecting the T-Spline and target edge chains." translation="" />
	<label commandName="TSplineErrorMatchPatchFaceInvalid" devLabel="Match failure, the patch is not on the correct face.  Internal error. Please try re-matching with different or newly created surfaces." translation="" />
	<label commandName="TSplineErrorMatchPatchInvalid" devLabel="Match failure, patch walker returned an invalid patch.  Internal error. Please try re-matching with different or newly created surfaces." translation="" />
	<label commandName="TSplineErrorMatchPatchWalkerInvalid" devLabel="Match failure, an error state is detected while attempting to traverse the T-Spline surface's Bezier patches.  Internal error. Please try re-matching with different or newly created surfaces." translation="" />
	<label commandName="TSplineErrorMatchSourceCombPositionInvalid" devLabel="Match failure, the T-Spline point is an invalid comb for positional match.  Internal error. Please try re-matching with different or newly created surfaces." translation="" />
	<label commandName="TSplineErrorMatchSourceFaceInvalid" devLabel="Match failure, T-Spline face is invalid.  Internal error. Please try re-matching with different or newly created surfaces." translation="" />
	<label commandName="TSplineErrorMatchSourceLinkIndexInvalid" devLabel="Match failure, T-Spline surface link index is invalid or out-of-bounds in the T-Spline link samples.  Please try matching using a new or different T-Spline surface." translation="" />
	<label commandName="TSplineErrorMatchSourceLinksEmpty" devLabel="Match failure, T-Spline links are empty.  Please try re-selecting the T-Spline edge chain." translation="" />
	<label commandName="TSplineErrorMatchSourceNotPeriodic" devLabel="Match failure, the target edge chain is periodic and the T-Spline edge chain is not.  The T-Spline and target edge chains must both be periodic or non-periodic." translation="" />
	<label commandName="TSplineErrorMatchSourceSampleIndexInvalid" devLabel="Match failure, T-Spline surface sample index is invalid or out-of-bounds.  Please try matching using a new or different T-Spline surface." translation="" />
	<label commandName="TSplineErrorMatchTargetNotPeriodic" devLabel="Match failure, the T-Spline edge chain is periodic and the target edge chain is not.  The T-Spline and target edge chains must both be periodic or non-periodic." translation="" />
	<label commandName="TSplineErrorMatchTargetSampleDomainError" devLabel="Match failure, target sampling domain error during adjustment.  Please try re-selecting the target edge chain or matching to a different or new target surface." translation="" />
	<label commandName="TSplineErrorMatchTargetSampleError" devLabel="Match failure, target sampling error.  Please try re-selecting the target edge chain or matching to a different or new target surface." translation="" />
	<label commandName="TSplineErrorMatchTargetSampleIndexInvalid" devLabel="Match failure, target sample index is invalid or out-of-bounds in the target surface samples.  Please try re-selecting the T-Spline edge chain." translation="" />
	<label commandName="TSplineErrorMatchTargetSamplesEmpty" devLabel="Match failure, target samples are empty.  Please try re-selecting the target edge chain." translation="" />
	<label commandName="TSplineErrorMatchVertexCapUncreased" devLabel="Match failure, the edge chain touches at least one uncreased cap point.  Please try re-selecting the edge chain so that no edges go through cap, star, or extraordinary points." translation="" />
	<label commandName="TSplineErrorToplogyNoSplit" devLabel="Could not split the given edge or face below the current parametric tolerance." translation="" />
	<label commandName="TSplineExtrudeFailed" devLabel="Extrude failed with current selection set" translation="" />
	<label commandName="TSplineFaceSelectionCategory" devLabel="T-Spline Faces" translation="" />
	<label commandName="TSplineGripSelectionCategory" devLabel="T-Spline Tangency Handles" translation="" />
	<label commandName="TSplineMatchFeatureName" devLabel="Match" translation="" />
	<label commandName="TSplinePipeFeatureName" devLabel="Pipe" translation="" />
	<label commandName="TSplinePipeJointSelectionCategory" devLabel="Pipe Joint" translation="" />
	<label commandName="TSplinePipeSectionSelectionCategory" devLabel="Pipe Section" translation="" />
	<label commandName="TSplinePipeSegmentSelectionCategory" devLabel="Pipe Segment" translation="" />
	<label commandName="TSplineStraigtenSurfacePointsError" devLabel="Straighten operation failed. When you use the Surface Points option, ensure that the T-Spline surface can be displayed in Smooth display mode." translation="" />
	<label commandName="TSplineSurfaceUpgrade" devLabel="Both of the selected T-Spline bodies were upgraded to the latest version." translation="" />
	<label commandName="TSplineSurfaceUpgrade2" devLabel="Selected T-Spline bodies were upgraded to the latest version." translation="" />
	<label commandName="TSplineSurfaceUpgrade2_ccy" devLabel="Selected T-Spline bodies were upgraded to the latest change." translation="" />
	<label commandName="TSplineSurfaceUpgrade_ccy" devLabel="Both of the selected T-Spline bodies were upgraded to the latest change." translation="" />
	<label commandName="TSplineToASMSurfaceOverloadFailed" devLabel="T-SplineToASM (surface overload) failed." translation="" />
	<label commandName="TSplineToBRepConversionFailed" devLabel="Failed to convert T-Spline surface to BRep." translation="" />
	<label commandName="TSplineTwoValenceTPointsConverted" devLabel="Some converted T-Points only touched two edges and can cause poor surface quality or compute failures.&#10;&#10;Use Repair Body to convert the problematic star points back to T-Points or undo and use Make Uniform again with Convert T-Points unchecked." translation="" />
	<label commandName="TSplineVertexSelectionCategory" devLabel="T-Spline Vertices" translation="" />
	<label commandName="TWO_BEND_CORNER_RELIEF_PLACEMENT_UNSUPPORTED" devLabel="Bend feature can automatically create corner reliefs if shape type is set to Square, Round or Tear and relief placement is set to Intersection in Sheet Metal rule. Modify the rule or use Override in Bend dialog if you need corner reliefs." translation="" />
	<label commandName="TWO_BEND_CORNER_RELIEF_SHAPE_UNSUPPORTED" devLabel="Bend feature can automatically create corner reliefs if shape type is set to Square, Round or Tear in Sheet Metal rule. Modify the rule or use Override in Bend dialog if you need corner reliefs." translation="" />
	<label commandName="Tangent" devLabel="Tangent" translation="" />
	<label commandName="TargetBodyCollectionNotVisible" devLabel="The visibility of Bodies folder is turned on." translation="" />
	<label commandName="TargetComponentReadonly" devLabel="The selected target component for Insert is in a readonly XRef. Please select another one." translation="" />
	<label commandName="TargetDocumentNotFound" devLabel="Target document not found!!" translation="" />
	<label commandName="Target_Body_Compute_Failure" devLabel="Target Body Error" translation="" />
	<label commandName="Tear" devLabel="Tear" translation="" />
	<label commandName="TextConfig" devLabel="Text" translation="" />
	<label commandName="TextOnPathConfig" devLabel="Text (On Path)" translation="" />
	<label commandName="TextPathRefreneceDeletionWarning" devLabel="Deleted geometry is refrenced as a path for a text, edit text to refer new path." translation="" />
	<label commandName="TheMatchingKnotsGuaranteeIsNotMet" devLabel="The matching knots guarantee is not met" translation="" />
	<label commandName="TheMeshContainsDegenerateFacesZeroLengthEdges" devLabel="The mesh contains degenerate faces/zero-length edges" translation="" />
	<label commandName="TheMeshContainsValence2StarPoints" devLabel="The mesh contains valence-2 star points" translation="" />
	<label commandName="TheMeshIsNotManifold" devLabel="The mesh is not manifold" translation="" />
	<label commandName="ThickenFailed1" devLabel="Thicken operation can be applied only on manifold surfaces" translation="" />
	<label commandName="ThickenFailed2" devLabel="Thicken operation can be applied only on manifold surfaces" translation="" />
	<label commandName="ThickenFeatureName" devLabel="Thicken" translation="" />
	<label commandName="Thread for Hole" devLabel="No possible thread faces found." translation="" />
	<label commandName="ThreadContactInsufficient" devLabel="Insufficient thread engagement. At least two threads must be engaged." translation="" />
	<label commandName="ThreadCosmetic" devLabel="Cosmetic" translation="" />
	<label commandName="ThreadExternal" devLabel="external" translation="" />
	<label commandName="ThreadFaceChanged" devLabel="Update needed after geometry change" translation="" />
	<label commandName="ThreadFeatureName" devLabel="Thread" translation="" />
	<label commandName="ThreadInternal" devLabel="internal" translation="" />
	<label commandName="ThreadModeled" devLabel="Modeled" translation="" />
	<label commandName="ThreadProfileAcmeST" devLabel="ACME Screw Threads" translation="" />
	<label commandName="ThreadProfileAfbmaLocknuts" devLabel="AFBMA Standard Locknuts" translation="" />
	<label commandName="ThreadProfileAnsiMetricM" devLabel="ANSI Metric M Profile" translation="" />
	<label commandName="ThreadProfileAnsiUnifiedST" devLabel="ANSI Unified Screw Threads" translation="" />
	<label commandName="ThreadProfileBSPTaperInternal" devLabel="BSP Taper Internal" translation="" />
	<label commandName="ThreadProfileBspPT" devLabel="BSP Pipe Threads" translation="" />
	<label commandName="ThreadProfileDINPipeTaperInternal" devLabel="DIN Pipe Taper Internal" translation="" />
	<label commandName="ThreadProfileDinPT" devLabel="DIN Pipe Threads" translation="" />
	<label commandName="ThreadProfileGbMetric" devLabel="GB Metric Profile" translation="" />
	<label commandName="ThreadProfileGbNoSealPT" devLabel="GB Pipe Threads" translation="" />
	<label commandName="ThreadProfileGostST" devLabel="GOST Self-tapping Screw Thread" translation="" />
	<label commandName="ThreadProfileISOTaperInternal" devLabel="ISO Taper Internal" translation="" />
	<label commandName="ThreadProfileInchTT" devLabel="Inch Tapping Threads" translation="" />
	<label commandName="ThreadProfileIsoMetric" devLabel="ISO Metric profile" translation="" />
	<label commandName="ThreadProfileIsoMetricTT" devLabel="ISO Metric Trapezoidal Threads" translation="" />
	<label commandName="ThreadProfileIsoPT" devLabel="ISO Pipe Threads" translation="" />
	<label commandName="ThreadProfileJISTaperInternal" devLabel="JIS Taper Internal" translation="" />
	<label commandName="ThreadProfileJisPT" devLabel="JIS Pipe Threads" translation="" />
	<label commandName="ThreadProfileMetricFormingST" devLabel="Metric Forming Screw Threads" translation="" />
	<label commandName="ThreadProfileNPT" devLabel="NPT" translation="" />
	<label commandName="ThreadProfileNPTforPVCPipeAndFitting" devLabel="NPT for PVC Pipe and Fitting" translation="" />
	<label commandName="ThreadTypeBrowserEntry" devLabel="Threads: " translation="" />
	<label commandName="Thread_Designation" devLabel="Thread Designation" translation="" />
	<label commandName="Thread_Length" devLabel="Thread Length" translation="" />
	<label commandName="Thread_Pitch" devLabel="Thread Pitch" translation="" />
	<label commandName="Thread_Pitch_(per_inch)" devLabel="Thread Pitch (per inch)" translation="" />
	<label commandName="Thread_Sub-type" devLabel="Thread Sub-type" translation="" />
	<label commandName="Thread_Type" devLabel="Thread Type" translation="" />
	<label commandName="ThreeBendReliefRadius" devLabel="Relief Radius" translation="" />
	<label commandName="Threshold" devLabel="Threshold:" translation="" />
	<label commandName="TimelineAllPropertyTooltip" devLabel="Check to configure all available options." translation="" />
	<label commandName="TimelineConfigureTooltip" devLabel="Check to configure %1%." translation="" />
	<label commandName="TimelineExpressionTooltip" devLabel="Expression" translation="" />
	<label commandName="TimelineParameterTooltip" devLabel="Parameter" translation="" />
	<label commandName="TimelineSuppressionTooltip" devLabel="Check to configure Suppression for this feature.&lt;br/&gt;&lt;br/&gt;All dependent features will also be suppressed downstream." translation="" />
	<label commandName="TimelineValueTooltip" devLabel="Value" translation="" />
	<label commandName="TipAngle" devLabel="Tip Angle" translation="" />
	<label commandName="ToggleIsoCurveDrivenReferenceFailure" devLabel="%1% cannot be set to driven because it's used by an iso curve parameter in this sketch. To set %1% to driven, first remove its reference from the iso curve parameters." translation="" />
	<label commandName="ToleranceTooltip" devLabel="Tolerance" translation="" />
	<label commandName="ToolBodyCreateRevolveFailError" devLabel="Cannot complete revolve." translation="" />
	<label commandName="ToolBodyCreationFailError" devLabel="Tool body creation failed" translation="" />
	<label commandName="ToolBodyStitchFailError" devLabel="Unable to stitch the bodies." translation="" />
	<label commandName="ToolCreationFailure" devLabel="Cutting Tool does not generate successfully!" translation="" />
	<label commandName="ToolOrientationAccessibilityAnalysisDefaultUserName" devLabel="ToolOrientationAccessibility" translation="" />
	<label commandName="Tool_Body_Compute_Failure" devLabel="Tool Body Error" translation="" />
	<label commandName="TorusDiameter" devLabel="Torus Diameter" translation="" />
	<label commandName="TotalRunoutTooltip" devLabel="Total Run-out" translation="" />
	<label commandName="TransformMissingErrorNew" devLabel="Transform of the package is missing, the position of the 3D model could be wrong." translation="" />
	<label commandName="Trim To Bend" devLabel="Trim To Bend" translation="" />
	<label commandName="TwoBendReliefSizeConfig" devLabel="Relief Size" translation="" />
	<label commandName="UNFOLD_COLLISION" devLabel="Collisions found while unfolding, cannot unfold." translation="" />
	<label commandName="UNFOLD_ERROR" devLabel="Unfolding failed." translation="" />
	<label commandName="UNFOLD_FEATURE_BENDFACE_REF_LOST" devLabel="Bend face is not available." translation="" />
	<label commandName="UNFOLD_FEATURE_NO_STATIONARY_FACE" devLabel="Stationary face not available." translation="" />
	<label commandName="UNFOLD_NO_BENDS_FOR_STATIONARAY" devLabel="The selected stationary entity is not connected to any bends. Please select a different stationary entity." translation="" />
	<label commandName="UnCreaseVerticesFailed" devLabel="Failed to uncrease the given vertices." translation="" />
	<label commandName="UnWeldFailed" devLabel="UnWeld failed with given input" translation="" />
	<label commandName="Unable to open referenced design" devLabel="Failed to open source design." translation="" />
	<label commandName="UnableToPromoteMeshToDesign" devLabel="Unable to promote mesh to design workspace, since the component data is unavailable." translation="" />
	<label commandName="UncreaseEdgeFailed" devLabel="Failed to uncrease the given edges." translation="" />
	<label commandName="Unfold" devLabel="No target component." translation="" />
	<label commandName="UnfreezeFailed" devLabel="Failed to unfreeze selected entities." translation="" />
	<label commandName="UnitGeneralDesignCustomLengthTooltip" devLabel="Default unit of length for a new design" translation="" />
	<label commandName="UnitGeneralDesignCustomLengthUserName" devLabel="Length" translation="" />
	<label commandName="UnitGeneralDesignCustomMassTooltip" devLabel="Default unit of mass for a new design" translation="" />
	<label commandName="UnitGeneralDesignCustomMassUserName" devLabel="Mass" translation="" />
	<label commandName="UnitGeneralUnitsToolTip" devLabel="Default unit system for new design" translation="" />
	<label commandName="UnitGeneralUnitsUserName" devLabel="Default units for new design" translation="" />
	<label commandName="Units" devLabel="Units: " translation="" />
	<label commandName="UnrecognizedSubdivisionSurface" devLabel="%1% may have imported partially or incorrectly. Crease information may have been lost or a mesh may be corrupt.&#10;&#10;From the source application, export the unrefined subdivision surface instead of the denser, refined mesh, then try Insert again." translation="" />
	<label commandName="UnresolvedConfigTooltipDesc" devLabel="One or more configurations contain unresolved configured components.&#10;&#10;Click to use Resolve Component to regenerate configurations and upload them to the cloud." translation="" />
	<label commandName="UnresolvedConfigTooltipStr" devLabel="Unresolved Components: Configuration upload incomplete" translation="" />
	<label commandName="UnsavedDocumentLabel" devLabel="(Unsaved)" translation="" />
	<label commandName="UpdateCustomConstraintsJointFailed" devLabel="Update of Auto Joints geometry failed." translation="" />
	<label commandName="UpdatePCBPackageFailure" devLabel="Failed to update PCB Component package" translation="" />
	<label commandName="UpdatePMIAnnotationsFailedAnnotations" devLabel="PMISettings update failed for: " translation="" />
	<label commandName="Update_Assembly_References_Failed" devLabel="Can not update Assembly References" translation="" />
	<label commandName="UserParameter" devLabel="User Parameter" translation="" />
	<label commandName="UserParameterRule" devLabel="User Parameter Rule 1" translation="" />
	<label commandName="UserPropertyOnComponent__Description" devLabel="Description" translation="" />
	<label commandName="UserPropertyOnComponent__ITEM_ID" devLabel="Item" translation="" />
	<label commandName="UserPropertyOnComponent__MATERIAL" devLabel="Material" translation="" />
	<label commandName="UserPropertyOnComponent__Mass" devLabel="Mass" translation="" />
	<label commandName="UserPropertyOnComponent__Part Name" devLabel="Part Name" translation="" />
	<label commandName="UserPropertyOnComponent__Part Number" devLabel="Part Number" translation="" />
	<label commandName="UserPropertyOnComponent__QTY" devLabel="Qty" translation="" />
	<label commandName="VERTEX_REFERENCE_LOST" devLabel="The vertex reference is lost and this feature is using cached geometry.&#10;Edit this feature and select new vertex references." translation="" />
	<label commandName="VariablePointEdgeEnd" devLabel="End Point Radius" translation="" />
	<label commandName="VariablePointEdgeStart" devLabel="Start Point Radius" translation="" />
	<label commandName="VariedProperty" devLabel="(Various)" translation="" />
	<label commandName="Vertex" devLabel="Vertex" translation="" />
	<label commandName="ViewSheetMetalDataCommandTooltip" devLabel="View Rule" translation="" />
	<label commandName="VisibilityStr" devLabel="Visibility" translation="" />
	<label commandName="VisualAnalysesBrowserEntryLabel" devLabel="Analysis" translation="" />
	<label commandName="VisualAnalysesSelectionId" devLabel="VisualAnalyses" translation="" />
	<label commandName="VisualAnalysisSelectionId" devLabel="VisualAnalysis" translation="" />
	<label commandName="WMFailedToRemoveWorkingModel" devLabel="Failed to remove Working Model(s)." translation="" />
	<label commandName="WMFixUpConfigDisconnect" devLabel="The following '%1%' models were not linked to any configurations. Since they must be linked to a configuration we have linked them to the active configuration. We recommend you save the file.&#10;&#09;" translation="" />
	<label commandName="WMLightWeightBaseAssetLoadFailed" devLabel="Failure loading Base Asset during Lightweight Working Model update operation." translation="" />
	<label commandName="WMLightWeightInvalidAsset" devLabel="Context asset is not working model asset during Lightweight Working Model update operation." translation="" />
	<label commandName="WMLightWeightInvalidBaseAsset" devLabel="Base Asset not found during Lightweight Working Model update operation." translation="" />
	<label commandName="WMLightWeightNULLWorkingComponent" devLabel="Working component is null during Working Model Light weight update operation." translation="" />
	<label commandName="WMNoWorkingModelIsSelected" devLabel="No Working Model is selected." translation="" />
	<label commandName="WMNotAWorkingModel" devLabel="Input asset is not a Working Model Asset." translation="" />
	<label commandName="WMPlaceholderEntityCreateFailed" devLabel="Failed to create PlaceholderEntity for WorkingModel." translation="" />
	<label commandName="WMPlaceholderEntityGetFailed" devLabel="Failed to get PlaceholderEntity for WorkingModel." translation="" />
	<label commandName="WMUpdateInvalidAsset" devLabel="Source asset is found but is not working model asset during Working Model update operation." translation="" />
	<label commandName="WMUpdateNULLAsset" devLabel="Input WM asset is null during Working Model update operation." translation="" />
	<label commandName="WMUpdateNULLDocument" devLabel="Document is missing during Working Model update operation." translation="" />
	<label commandName="WMUpdateNULLWorkingComponent" devLabel="Working component is null during Working Model update operation." translation="" />
	<label commandName="WMWorkingModelIsActive" devLabel="Not possible to delete active Working Model." translation="" />
	<label commandName="WORK_AXIS_MISSING_INPUTS" devLabel="Missing inputs" translation="" />
	<label commandName="WORK_PLANE_INVALID_REFERENCE_PLANE" devLabel="Invalid reference plane" translation="" />
	<label commandName="WORK_PLANE_MISSING_INPUTS" devLabel="Missing inputs" translation="" />
	<label commandName="WORK_POINT_EXPECTING_FACE_OR_EDGE" devLabel="Invalid center, expecting face or edge" translation="" />
	<label commandName="WORK_POINT_MISSING_INPUTS" devLabel="Missing inputs" translation="" />
	<label commandName="WRONG RIB SKETCH" devLabel="The curve you are selecting does not intersect a solid body. Select another curve." translation="" />
	<label commandName="Washer_Height" devLabel="Washer Height" translation="" />
	<label commandName="WebComputeError" devLabel="Fail to compute web profile!" translation="" />
	<label commandName="WebDepth" devLabel="Depth" translation="" />
	<label commandName="WebDraftAngle" devLabel="Draft Angle" translation="" />
	<label commandName="WebFeatureName" devLabel="Web" translation="" />
	<label commandName="WebFilletRadius" devLabel="Fillet Radius" translation="" />
	<label commandName="WebThickness" devLabel="Thickness" translation="" />
	<label commandName="WeldFailed" devLabel="Weld failed" translation="" />
	<label commandName="WireframeAnnotationOutdatedChildError" devLabel="One or more items may be out of date" translation="" />
	<label commandName="WireframeAnnotationOutdatedError" devLabel="The CAD model has changed from the original source file, meaning the associated PMI may be out of date. In the original software, update the source file and then open it again in Fusion." translation="" />
	<label commandName="WorkAxisFromCurvedSurfacePointDirectionError" devLabel="Work Axis From a Point On Curved Surface Failed: failed to evaluate direction" translation="" />
	<label commandName="WorkAxisFromLocationAndVectorRequestGenericError" devLabel="Work Axis failed due to invalid input" translation="" />
	<label commandName="WorkAxisFromTwoPlanesRequestParallelPlanesError" devLabel="Work Axis From Two Planes failed: input planes do not intersect" translation="" />
	<label commandName="WorkGeomRecontructor_NoValidParent" devLabel="Cannot find a valid root component" translation="" />
	<label commandName="WorkGeometryCustomGroupMoveFailed" devLabel="Work Geometry Group Move Operation Failed." translation="" />
	<label commandName="WorkPlaneFromLocationAndVectorRequestGenericError" devLabel="Work Plane failed due to invalid input" translation="" />
	<label commandName="WorkPlaneFromTwoLinesRequestLinesNotParallelOrIntersectError" devLabel="Work Plane From Two Lines failed:  Input lines must intersect or be parallel" translation="" />
	<label commandName="WorkPlaneFromTwoPlanesRequestMatchFailedError" devLabel="Mid-Plane Work Plane failed:  Input not found" translation="" />
	<label commandName="WorkPlaneTangentByRefPlaneInvalidRefPlnError" devLabel="Invalid reference plane" translation="" />
	<label commandName="WorkPlaneTangentByRefPlaneInvalidTargetError" devLabel="Invalid target face" translation="" />
	<label commandName="WorkPlaneTangentByRefPlaneRefPlaneLostError" devLabel="Reference plane lost" translation="" />
	<label commandName="WorkPlaneTangentByRefPlaneRequestGenericError" devLabel="Tangent Work Plane failed due to invalid input" translation="" />
	<label commandName="WorkPlaneTangentByRefPlaneTargetLostError" devLabel="Target cylindrical/conical face lost" translation="" />
	<label commandName="WorkPlaneTangentToCylinderRequestGenericError" devLabel="Tangent Work Plane failed due to invalid input" translation="" />
	<label commandName="WorkPointFromCurvedSurfacePointDirectionError" devLabel="Work Point From Curved Surface failed: failed to evaluate point due to invalid geometry type." translation="" />
	<label commandName="WorkPointFromLineAndPlaneRequestLineAndFaceInvalidInputError" devLabel="Work Point From Line and Plane failed due to invalid input" translation="" />
	<label commandName="WorkPointFromLineAndPlaneRequestLineAndFaceParallelError" devLabel="Work Point From Line and Plane failed: Selected Face and Line are parallel" translation="" />
	<label commandName="WorkPointFromSphereRequestGenericError" devLabel="Cannot create point" translation="" />
	<label commandName="WorkPointFromThreePlanesParallelPlanesError" devLabel="Work Point From Three Planes failed: input planes do not intersect" translation="" />
	<label commandName="WorkPointFromTwoLinesError" devLabel="Work Point From Two Lines failed: lines do not intersect" translation="" />
	<label commandName="WorkPointSurfaceChangedError" devLabel="Work Point From Curved Surface failed: failed to evaluate point due to surface change type." translation="" />
	<label commandName="WorkingComponent" devLabel="Fusion Working Model" translation="" />
	<label commandName="WorkingModel" devLabel="WorkingModel" translation="" />
	<label commandName="WorkingModelBaseComponentInvalid" devLabel="Base component of cloning operation failed sanity check. Not a Fusion component" translation="" />
	<label commandName="WorkingModelCloneFeatureFailure" devLabel="Target component is missing!" translation="" />
	<label commandName="WorkingModelCloneFeatureFailure1" devLabel="Error Creating Working Model Clone feature!" translation="" />
	<label commandName="WorkingModelCopyFailed" devLabel="An error occurred during Working Model copy operation." translation="" />
	<label commandName="WorkingModelDocumentInavlid" devLabel="Not a valid document" translation="" />
	<label commandName="WorkingModelInvalidAssetSubtype" devLabel="Asset Subtype provided is not registered with Asset Subtype Mgr." translation="" />
	<label commandName="WorkingModelPlaceholderRootLabel" devLabel="Working Models" translation="" />
	<label commandName="WorkingModelRenameFailed" devLabel="An error occurred during Working Model rename operation." translation="" />
	<label commandName="WorkingModelSelectionId" devLabel="Flat Pattern" translation="" />
	<label commandName="WorkingModelSourceComponentInvalid3" devLabel="Unknown internal type of working model requested!" translation="" />
	<label commandName="WorkingModelTargetAssetInvalid" devLabel="Target asset of cloning operation failed sanity check!" translation="" />
	<label commandName="WorkingModelTargetComponentInvalid" devLabel="Target component of cloning operation failed sanity check!" translation="" />
	<label commandName="Wrench_Size" devLabel="Wrench Size" translation="" />
	<label commandName="WrongDocumentEnv" devLabel="Wrong Document Environment!" translation="" />
	<label commandName="WrongDownloadPath" devLabel="Downloaded path %1% is not proper" translation="" />
	<label commandName="WrongDownloadPath3" devLabel="Downloaded path %1% is not proper" translation="" />
	<label commandName="XRefDesignMissing" devLabel="Some indirect referenced design cannot be found!" translation="" />
	<label commandName="XRefDifferentVersionAlreadyExists" devLabel="A different version of the referenced document already exists. Please update that to latest version first." translation="" />
	<label commandName="XRefDifferentVersionAlreadyExistsInPaste" devLabel="A different version of the referenced document already exists. We'll use this version for paste." translation="" />
	<label commandName="XRefDifferentVersionAlreadyExistsInPaste_ccy" devLabel="A different change to the referenced document already exists. This change will be used when pasting." translation="" />
	<label commandName="XRefDifferentVersionAlreadyExists_ccy" devLabel="The referenced document is not the latest. Please update it to its latest change first." translation="" />
	<label commandName="XRefDirectComponentMissing" devLabel="Unresolved external component&lt;br&gt;%1%" translation="" />
	<label commandName="XRefIndirectCompMissing" devLabel="Unresolved external component: %1%&lt;br&gt;%2%" translation="" />
	<label commandName="XRefLoadGroupToolTip" devLabel="Load Packages as XRef by XRef Load group" translation="" />
	<label commandName="XRefLoadGroupUserName" devLabel="XRef Load Groups" translation="" />
	<label commandName="XRefTargetComponentMissing" devLabel="The referenced design cannot be found!" translation="" />
	<label commandName="ZERO_DISTANCE_ERROR" devLabel="Zero distance" translation="" />
	<label commandName="ZebraAnalysisDefaultUserName" devLabel="Zebra" translation="" />
	<label commandName="applyToselection" devLabel="Apply to selection" translation="" />
	<label commandName="applyToselectionForPlastic" devLabel="Apply to selection" translation="" />
	<label commandName="bendConditions" devLabel="Bend Conditions" translation="" />
	<label commandName="bendRadius" devLabel="Bend radius" translation="" />
	<label commandName="bendReliefDepthConfig" devLabel="Relief Depth" translation="" />
	<label commandName="bendReliefWidthConfig" devLabel="Relief Width" translation="" />
	<label commandName="bendTransition" devLabel="Bend transition" translation="" />
	<label commandName="boxHeight" devLabel="Height" translation="" />
	<label commandName="boxLength" devLabel="Length" translation="" />
	<label commandName="boxWidth" devLabel="Width" translation="" />
	<label commandName="browserConfigNodeTooltip" devLabel="Activate Configurations (unavailable)&#10;&#10;Cannot activate different Configurations during Edit In Place." translation="" />
	<label commandName="browserDisconnectedComponentsConfigNodeTooltip" devLabel="No disconnected components" translation="" />
	<label commandName="circAngle" devLabel="Angle" translation="" />
	<label commandName="circCount" devLabel="Quantity" translation="" />
	<label commandName="clearSysmetryFailed" devLabel="Failed in clearing symmetry" translation="" />
	<label commandName="clearance" devLabel="Clearance" translation="" />
	<label commandName="cloningNotSupportedForIntersectingEdgesMatrix3dId" devLabel="Cloning not supported for IntersectingEdgesMatrix3dId" translation="" />
	<label commandName="cloningNotSupportedForMidPlaneMatrix3dId" devLabel="Cloning not supported for MidPlaneMatrix3dId" translation="" />
	<label commandName="cmplxDist" devLabel="Distance" translation="" />
	<label commandName="cmplxObjDistr" devLabel="Object Distribution" translation="" />
	<label commandName="cmplxObjSize" devLabel="Object Size" translation="" />
	<label commandName="cmplxPerim" devLabel="Perimeter Offset" translation="" />
	<label commandName="cmplxQuant" devLabel="Quantity" translation="" />
	<label commandName="cmplxRadDist" devLabel="Radial Distance" translation="" />
	<label commandName="cmplxRotation" devLabel="Rotation" translation="" />
	<label commandName="cmplxSize1" devLabel="Size Limit 1" translation="" />
	<label commandName="cmplxSize2" devLabel="Size Limit 2" translation="" />
	<label commandName="cmplxSpread" devLabel="Spread" translation="" />
	<label commandName="cmplxUDist" devLabel="U Distance" translation="" />
	<label commandName="cmplxUOff" devLabel="U Offset" translation="" />
	<label commandName="cmplxVDist" devLabel="V Distance" translation="" />
	<label commandName="cmplxVOff" devLabel="V Offset" translation="" />
	<label commandName="configTextContent" devLabel="Content" translation="" />
	<label commandName="configTextHeight" devLabel="Height" translation="" />
	<label commandName="conflictJointStateForDWJ" devLabel="&lt;b&gt;Cannot duplicate Joints with assembly conflicts&lt;/b&gt;&lt;br&gt;Repair the following joints before you duplicate them:&lt;ul&gt;%1%&lt;/ul&gt;" translation="" />
	<label commandName="convertHoleThreadNoteInvalidSelection" devLabel="Selected PMI is not a valid hole/thread note." translation="" />
	<label commandName="convertHoleThreadNoteNoReferenceGeometry" devLabel="PMI has no valid reference geometry." translation="" />
	<label commandName="convertHoleThreadNoteNullSelection" devLabel="Failed to get PMI data for the hole." translation="" />
	<label commandName="convertLeaderLineNoteInvalidSelection" devLabel="Selected PMI is not a valid leader line note." translation="" />
	<label commandName="convertLeaderLineNoteNoReferenceGeometry" devLabel="PMI has no valid reference geometry." translation="" />
	<label commandName="convertLeaderLineNoteNoSnap" devLabel="Failed to get valid PMI target position." translation="" />
	<label commandName="convertLeaderLineNoteNullSelection" devLabel="Failed to get PMI data for the note." translation="" />
	<label commandName="cornerConditions" devLabel="Corner Conditions" translation="" />
	<label commandName="createDesignPlasticRulesHeaderToolTip" devLabel="Create or edit plastic rules in this design." translation="" />
	<label commandName="createDesignRulesHeaderToolTip" devLabel="Create or edit sheet metal rules in this design" translation="" />
	<label commandName="createLibraryPlasticRulesHeaderToolTip" devLabel="Create or edit plastic rules from the cloud library." translation="" />
	<label commandName="createLibraryRulesHeaderToolTip" devLabel="Create or edit sheet metal rules in the cloud library" translation="" />
	<label commandName="createPoint3dBetweenFacesFailed" devLabel="Creation of point between faces failed." translation="" />
	<label commandName="createPoint3dCenterIdFailed" devLabel="Creation of point at geometry center failed." translation="" />
	<label commandName="createPoint3dOnConeAxisIdFailed" devLabel="Creation of point on cone edge failed." translation="" />
	<label commandName="createPoint3dOnCurvedSurfaceFailed" devLabel="Creation of point on cylindrical, conical, spherical, toroidal or spline surface failed." translation="" />
	<label commandName="createPoint3dOnLinearEdgeIdFailed" devLabel="Creation of point on linear edge failed." translation="" />
	<label commandName="createPoint3dOnPoint3dOnPlaneUVIdFailed" devLabel="Creation of point on plane failed." translation="" />
	<label commandName="createPoint3dRefPointIdFailed" devLabel="Creation of point on plane failed." translation="" />
	<label commandName="createPointBetweenEdgesFailed" devLabel="Creation of point between edges failed." translation="" />
	<label commandName="createVector3dCurvedSurfaceIdFailed" devLabel="Creation of vector from geometry failed." translation="" />
	<label commandName="createVector3dIdFailed" devLabel="Creation of vector from geometry failed." translation="" />
	<label commandName="createVector3dNormalOnPrincipalPlaneThroughEdgeId" devLabel="Creation of vector from geometry and principal plane failed." translation="" />
	<label commandName="createVector3dOrthoCurvedSurfaceIdFailed" devLabel="Creation of ortho cylinder, cone, sphere, torus, or spline vector failed." translation="" />
	<label commandName="createVector3dOrthoIdFailed" devLabel="Creation of ortho vector failed." translation="" />
	<label commandName="cylinderDiameter" devLabel="Diameter" translation="" />
	<label commandName="cylinderHeight" devLabel="Height" translation="" />
	<label commandName="designPlasticRulesHeaderToolTip" devLabel="Select a plastic rule already in use in this design." translation="" />
	<label commandName="designRulesHeaderToolTip" devLabel="Select a sheet metal rule already in use in this design" translation="" />
	<label commandName="differentEntityTypeRelinked" devLabel="Constraints and dimensions applied on target geometry are removed due to different geometry types in relinking." translation="" />
	<label commandName="duplicateAndEdit" devLabel="Duplicate and edit rule" translation="" />
	<label commandName="duplicateAndEditForPlastic" devLabel="Duplicate and edit rule" translation="" />
	<label commandName="eInvalidExtrudeParameter" devLabel="Invalid parameters, extrude can't be created. Edit the parameters." translation="" />
	<label commandName="editRule" devLabel="Edit Rule" translation="" />
	<label commandName="editRuleForPlastic" devLabel="Edit Plastic Rule" translation="" />
	<label commandName="emptyTSplineSurface" devLabel="T-Spline surface is empty. Delete it from the Browser." translation="" />
	<label commandName="extendBooleanFail" devLabel="Cannot extend extrusion to object. The extrusion profile falls outside the boundary of the selected body. Select a face or plane instead, or adjust the profile so that it falls inside the boundary of the selected body." translation="" />
	<label commandName="failToProjectProfileToRemoteSurface" devLabel="Cannot extend extrusion to object. The extrusion profile falls outside the boundary of the selected body. Select a face or plane instead, or adjust the profile so that it falls inside the boundary of the selected body." translation="" />
	<label commandName="failToProjectSomeProfileToRemoteSurface" devLabel="Fail to project some profile(s) to remote surface" translation="" />
	<label commandName="failTofindToNextTarget" devLabel="Cannot extend extrusion to object. The extrusion profile falls outside the boundary of the selected body. Select a face or plane instead, or adjust the profile so that it falls inside the boundary of the selected body." translation="" />
	<label commandName="fastenersFitBoltBigMsg" devLabel="Automatically selected bolt is too big for the selected geometry." translation="" />
	<label commandName="fastenersFitBoltDifferentSizeMsg" devLabel="Automatically selected bolt has a different diameter than the selected geometry and won't fit." translation="" />
	<label commandName="fastenersFitBoltSmallMsg" devLabel="Automatically selected bolt is too small for the selected geometry." translation="" />
	<label commandName="fastenersFitInsertSmallMsg" devLabel="Automatically selected insert is too small for the selected geometry." translation="" />
	<label commandName="fastenersFitNutBigMsg" devLabel="Automatically selected nut is too big for the selected geometry." translation="" />
	<label commandName="fastenersFitNutDifferentSizeMsg" devLabel="Automatically selected nut has a different size than the selected fastener." translation="" />
	<label commandName="fastenersFitNutSmallMsg" devLabel="Automatically selected nut is too small for the selected geometry." translation="" />
	<label commandName="fastenersFitRivetLongMsg" devLabel="Automatically selected rivet is too long for the selected geometry." translation="" />
	<label commandName="fastenersFitRivetShortMsg" devLabel="Automatically selected rivet is too short for the selected geometry." translation="" />
	<label commandName="fastenersFitRivetTooBigMsg" devLabel="Automatically selected rivet is too big for the selected geometry." translation="" />
	<label commandName="fastenersFitRivetTooSmallMsg" devLabel="Automatically selected rivet is too small for the selected geometry." translation="" />
	<label commandName="fastenersFitThreadPitchMsg" devLabel="Automatically selected fastener has a different thread pitch than the selected geometry and won't fit." translation="" />
	<label commandName="fastenersFitWasherBigMsg" devLabel="Automatically selected washer is too big for the selected geometry." translation="" />
	<label commandName="fastenersFitWasherDifferentSizeMsg" devLabel="Automatically selected washer has a different size than the selected fastener." translation="" />
	<label commandName="fastenersFitWasherSmallMsg" devLabel="Automatically selected washer is too small for the selected geometry." translation="" />
	<label commandName="fastenersOverrideAutoThreadSize" devLabel="Use the drop-down list to select a different nominal size, or select a different type of fastener that will fit the geometry." translation="" />
	<label commandName="featureDrivingAsmReferenceDesc" devLabel="Cannot configure feature&lt;br /&gt;because it drives an Assembly Reference.&lt; br / &gt;&lt;br /&gt;Open %1%,&lt;br /&gt;Break Link to %2%,&lt;br /&gt;and delete the Assembly Reference feature from&lt;br /&gt;this design to make this feature configurable&lt;br /&gt;" translation="" />
	<label commandName="featureDrivingAsmReferenceTitle" devLabel="&lt;b&gt;%1% Not Configurable&lt;/b&gt;" translation="" />
	<label commandName="fileIsBeingUploaded" devLabel="Waiting for file being uploaded." translation="" />
	<label commandName="flatPatternBendAngle" devLabel="flat pattern bend angle" translation="" />
	<label commandName="gap" devLabel="Gap" translation="" />
	<label commandName="generateMissingConfiguration" devLabel="Configuration document not found" translation="" />
	<label commandName="geoRelFeatureFlip" devLabel="Flip" translation="" />
	<label commandName="imprintExternalLoop" devLabel="Failed to imprint external loop" translation="" />
	<label commandName="imprintInternalLoop" devLabel="Failed to imprint internal loop" translation="" />
	<label commandName="inThisDesign" devLabel="In this design" translation="" />
	<label commandName="infoShapeArcWeldLabel" devLabel="Arc Weld" translation="" />
	<label commandName="infoShapeFullRoundLabel" devLabel="Full Round" translation="" />
	<label commandName="infoShapeIntersectionLabel" devLabel="Intersection" translation="" />
	<label commandName="infoShapeLaserWeldLabel" devLabel="Laser Weld" translation="" />
	<label commandName="infoShapeLinearWeldLabel" devLabel="Linear Weld" translation="" />
	<label commandName="infoShapeNoReplacementLabel" devLabel="No Replacement" translation="" />
	<label commandName="infoShapeRoundWithRadiusLabel" devLabel="Round with Radius" translation="" />
	<label commandName="infoShapeRoundforConfig" devLabel="Round" translation="" />
	<label commandName="infoShapeSquareLabel" devLabel="Square" translation="" />
	<label commandName="infoShapeStraightforConfig" devLabel="Straight" translation="" />
	<label commandName="infoShapeTearforConfig" devLabel="Tear" translation="" />
	<label commandName="infoShapeTrimToBendLabel" devLabel="Trim to Bend" translation="" />
	<label commandName="infoTwoBendShapeRoundLabel" devLabel="Round" translation="" />
	<label commandName="infoTwoBendShapeTearLabel" devLabel="Tear" translation="" />
	<label commandName="initCustomConstraintsJointIdFailed" devLabel="Creation origin geometry failed." translation="" />
	<label commandName="initMatrix3dIdFailed" devLabel="Creation origin geometry failed." translation="" />
	<label commandName="innerRadius" devLabel="Nominal Radius" translation="" />
	<label commandName="invalidSurface" devLabel="T-Spline surface is invalid. Delete it from the Browser." translation="" />
	<label commandName="jointIdMissingJointOrigins" devLabel="Update of joint geometry failed due to missing Joint Origin information." translation="" />
	<label commandName="kFactor" devLabel="K Factor" translation="" />
	<label commandName="keyAppearanceTableName" devLabel="Appearance Themes" translation="" />
	<label commandName="keyChildTableName" devLabel="Theme Table" translation="" />
	<label commandName="keyConfigAlreadyDerived" devLabel="Circular reference&#10;&#10;Cannot insert this configuration because it is already derived into the design." translation="" />
	<label commandName="keyConfigAlreadyInserted" devLabel="Circular reference&#10;&#10;Cannot derive this configuration because it is already inserted into the design." translation="" />
	<label commandName="keyConfigDataDelayed" devLabel="Cannot insert&#10;&#10;Cannot select this configuration yet because its save job is delayed. Check Cloud Job Status." translation="" />
	<label commandName="keyConfigDataHasError" devLabel="Repair required&#10;&#10;Cannot select this configuration because it didn't save properly. Open its Configured Design to repair it." translation="" />
	<label commandName="keyConfigDataInBuilding" devLabel="Save in progress&#10;&#10;Cannot select this configuration until its save job completes." translation="" />
	<label commandName="keyConfigDataInQueue" devLabel="Save in queue&#10;&#10;Cannot select this configuration until its save job completes." translation="" />
	<label commandName="keyConfigDataIsReady" devLabel="Available&#10;&#10;The latest version of this Configuration is available to select." translation="" />
	<label commandName="keyConfigDataIsReady_ccy" devLabel="Available&#10;&#10;The latest change to this configuration is available to select." translation="" />
	<label commandName="keyConfigNotYetReferenced" devLabel="Not yet referenced&#10;&#10;This configuration version has never been referenced. It may take a few moments to reference it for the first time." translation="" />
	<label commandName="keyConfigNotYetReferenced_ccy" devLabel="Not yet referenced&#10;&#10;This configuration change has never been referenced. It may take a few moments to reference it for the first time." translation="" />
	<label commandName="keyConfigStatusInQuery" devLabel="Loading&#10;&#10;Loading the status of this configuration to determine if you can select it." translation="" />
	<label commandName="keyConfigStatusUnknown" devLabel="Status unknown&#10;&#10;Cannot select this configuration because its status is unknown. Cancel the command and try again." translation="" />
	<label commandName="keyPhysicalMaterialTableName" devLabel="Physical Material Themes" translation="" />
	<label commandName="keyPlasticRuleTableName" devLabel="Plastic Rule Themes" translation="" />
	<label commandName="keyPrimaryTableName" devLabel="Configurations" translation="" />
	<label commandName="keySheetMetalRuleTableName" devLabel="Sheet Metal Rule Themes" translation="" />
	<label commandName="lclzBooleanFailure" devLabel="Failed to Boolean bodies together" translation="" />
	<label commandName="lclzConvertDesignDocType" devLabel="Convert Design Type" translation="" />
	<label commandName="lclzFailedToRevolveSE" devLabel="Failed to revolve the selected entities" translation="" />
	<label commandName="lclzFusionRepairBrowserCaption" devLabel="Repair Browser" translation="" />
	<label commandName="lclzHybridDesign" devLabel="Hybrid Design" translation="" />
	<label commandName="lclzInvalidSelection" devLabel="Invalid selection." translation="" />
	<label commandName="lclzTEFOSMBETOAMOTOS" devLabel="The edges from one side must be equal to or a multiple of the other side." translation="" />
	<label commandName="lclzUTBPTNP" devLabel="Unable to bridge periodic to non-periodic." translation="" />
	<label commandName="lclzUTDFSB" devLabel="Unable to determine face selection border." translation="" />
	<label commandName="library" devLabel="Library" translation="" />
	<label commandName="libraryPlasticRulesHeaderToolTip" devLabel="Select a plastic rule from the cloud library." translation="" />
	<label commandName="libraryRulesHeaderToolTip" devLabel="Select a sheet metal rule from the cloud library" translation="" />
	<label commandName="m_dThicknessError_NoSource" devLabel="Source bodies lost!" translation="" />
	<label commandName="makeExtentSheet" devLabel="Failed to create extended sheet" translation="" />
	<label commandName="makeUniformFailed" devLabel="Cannot complete Make Uniform for the selected bodies." translation="" />
	<label commandName="maxWallThickness" devLabel="Thickness Range Maximum" translation="" />
	<label commandName="minTaperAngle" devLabel="Minimum Draft Angle" translation="" />
	<label commandName="minWallThickness" devLabel="Thickness Range Minimum" translation="" />
	<label commandName="missingRefJointStateForDWJ" devLabel="&lt;b&gt;Cannot duplicate Joints with missing references&lt;/b&gt;&lt;br&gt;Repair the following joints before you duplicate them:&lt;ul&gt;%1%&lt;/ul&gt;" translation="" />
	<label commandName="missingRefandConflictJointStateForDWJ" devLabel="&lt;b&gt;Cannot duplicate Joints&lt;/b&gt;&lt;br&gt;Some joints you selected have assembly conflicts or are missing references. Repair the following joints before you duplicate them:&lt;ul&gt;%1% %2%&lt;/ul&gt;" translation="" />
	<label commandName="modeling-featurepack-desc" devLabel="This section controls optional capabilities within the Modeling workspaces." translation="" />
	<label commandName="modeling-featurepack-title" devLabel="Modeling" translation="" />
	<label commandName="mt-compute-desc" devLabel="Allows computing of multiple components to be split across multiple processors. Using this functionality will allow edited features to compute simultaneously, speeding up the overall recompute time. The performance improvement is based on implementation of &lt;a href='https://help.autodesk.com/view/NINVFUS/ENU/?guid=GUID-4B1F9693-F209-4833-AA16-1ACDA6005DB6'&gt;Best Practice&lt;/a&gt; methods." translation="" />
	<label commandName="mt-compute-title" devLabel="Enable Multi-threaded component compute" translation="" />
	<label commandName="nauticalMileNotSupportedWarning" devLabel="&lt;b&gt;Unit type not supported&lt;/b&gt;&lt;br&gt;&lt;br&gt;The design’s active unit type (%1%) is not supported by DXF. The export unit type is set to Centimeters.&lt;br&gt;&lt;br&gt;Review the Export DXF settings and select a compatible unit type." translation="" />
	<label commandName="newRule" devLabel="New Rule" translation="" />
	<label commandName="newRuleForPlastic" devLabel="New Plastic Rule" translation="" />
	<label commandName="nonExtractable" devLabel="T-Spline topology problem.  Use Modify - Utilities - Repair Body to remove error." translation="" />
	<label commandName="pathCount" devLabel="Quantity" translation="" />
	<label commandName="pathDist" devLabel="Distance" translation="" />
	<label commandName="patternInstances" devLabel="Too many pattern instances. Consider using Optimized/Identical compute option." translation="" />
	<label commandName="pcb3dBoardNotDefinedCmdBlockDesc" devLabel="Unavailable when board is not defined.&#10;&#10;To use 3D PCB tools, first edit the outline sketch to draw a closed profile, then Define Board to select a profile to create the PCB body. " translation="" />
	<label commandName="physicalMaterial" devLabel="Physical material" translation="" />
	<label commandName="plasticMaterial" devLabel="Physical Material" translation="" />
	<label commandName="plasticRulesInLibrary" devLabel="Library" translation="" />
	<label commandName="plasticRulesinThisDesign" devLabel="In this design" translation="" />
	<label commandName="preFixConfiguration" devLabel="Configuration" translation="" />
	<label commandName="preFixTheme" devLabel="Theme" translation="" />
	<label commandName="rectPatternAxis1" devLabel="Axis 1" translation="" />
	<label commandName="rectPatternAxis2" devLabel="Axis 2" translation="" />
	<label commandName="rectUCount" devLabel="Quantity" translation="" />
	<label commandName="rectUDist" devLabel="Distance" translation="" />
	<label commandName="rectVCount" devLabel="Quantity" translation="" />
	<label commandName="rectVDist" devLabel="Distance" translation="" />
	<label commandName="reliefDepth" devLabel="Relief depth" translation="" />
	<label commandName="reliefPlacement" devLabel="Relief placement" translation="" />
	<label commandName="reliefRemnant" devLabel="Relief remnant" translation="" />
	<label commandName="reliefShape" devLabel="Relief shape" translation="" />
	<label commandName="reliefShapeRound" devLabel="Round" translation="" />
	<label commandName="reliefShapeStraight" devLabel="Straight" translation="" />
	<label commandName="reliefShapeTear" devLabel="Tear" translation="" />
	<label commandName="reliefSize" devLabel="Relief size" translation="" />
	<label commandName="reliefWidth" devLabel="Relief width" translation="" />
	<label commandName="reportBendAngle" devLabel="Report bend angle" translation="" />
	<label commandName="revealHeight" devLabel="Reveal Height" translation="" />
	<label commandName="revolveAng1" devLabel="Angle" translation="" />
	<label commandName="revolveAng2" devLabel="Angle" translation="" />
	<label commandName="ruleCopyToLibraryStrForPlastic" devLabel="Copy to Library" translation="" />
	<label commandName="saveRule" devLabel="Save Rule" translation="" />
	<label commandName="saveRuleForPlastic" devLabel="Save Rule" translation="" />
	<label commandName="setAsDefault" devLabel="Set as Default" translation="" />
	<label commandName="setAsDefaultForPlastic" devLabel="Set as Default" translation="" />
	<label commandName="sketchdisplay-by-constraint-desc" devLabel="Need a description for this" translation="" />
	<label commandName="sketchdisplay-by-constraint-title" devLabel="Sketch Display by Constraint" translation="" />
	<label commandName="solveNewJointInconsistent" devLabel="Selected joint type will result in conflict" translation="" />
	<label commandName="sphereDiameter" devLabel="Diameter" translation="" />
	<label commandName="sweepDist" devLabel="Distance" translation="" />
	<label commandName="sweepPathDist" devLabel="Path Distance" translation="" />
	<label commandName="sweepRailDist" devLabel="Guide Rail Distance" translation="" />
	<label commandName="sweepTaperAng" devLabel="Taper Angle" translation="" />
	<label commandName="sweepTwistAng" devLabel="Twist Angle" translation="" />
	<label commandName="thickness" devLabel="Thickness" translation="" />
	<label commandName="thicknessRange" devLabel="Thickness Range" translation="" />
	<label commandName="thicknessVariation" devLabel="Thickness Variation" translation="" />
	<label commandName="thinSteelCondition" devLabel="Knife Edge Threshold" translation="" />
	<label commandName="tooltipDisableDescription" devLabel="Cannot configure this aspect because it&lt;br /&gt;drives an Assembly Reference.&lt; br / &gt;&lt;br /&gt;Open %1%,&lt;br /&gt;Break Link to %2%,&lt;br /&gt;and delete the Assembly Reference feature from&lt;br /&gt;this design to make this feature configurable.&lt;br /&gt;" translation="" />
	<label commandName="tooltipNotConfigurableFeatureParam" devLabel="&lt;b&gt;%1% Not Configurable&lt;/b&gt;&lt;br /&gt;&lt;br /&gt;Cannot configure this feature because it&lt;br /&gt;drives an Assembly Reference.&lt;br /&gt;&lt;br /&gt;Open %2%,&lt;br /&gt;Break Link to %3%,&lt;br /&gt;and delete the Assembly Reference feature from&lt;br /&gt;this design to make this feature configurable." translation="" />
	<label commandName="tooltipNotConfigurableUserParam" devLabel="&lt;b&gt;User Parameter Not Configurable&lt;/b&gt;&lt;br /&gt;&lt;br /&gt;Cannot configure this User Parameter&lt;br /&gt;because it drives an Assembly Reference.&lt;br /&gt;&lt;br /&gt;Open %1%,&lt;br /&gt;Break Link to %2%,&lt;br /&gt;and delete the Assembly Reference feature from&lt;br /&gt;this design to make this parameter configurable." translation="" />
	<label commandName="unGroundToParentStrText" devLabel="UnGround from Parent &lt;b&gt;(unavailable)&lt;/b&gt;&lt;br&gt;&lt;br&gt;" translation="" />
	<label commandName="unconfigureParamDisabledTooltipDesc" devLabel="You cannot unconfigure this aspect because it is referenced in an active rule. &#10;&#10;Turn the rule off or edit the rule so that it no longer references this aspect if you need to unconfigure it." translation="" />
	<label commandName="unconfigureParamDisabledTooltipTitle" devLabel="Cannot Unconfigure" translation="" />
	<label commandName="unfoldMethod" devLabel="Unfold method" translation="" />
	<label commandName="updateCustomConstraintsJointIdFailed" devLabel="Update origin geometry failed." translation="" />
	<label commandName="updateVector3dCurvedSurfaceIdFailed" devLabel="Update of vector from geometry failed." translation="" />
	<label commandName="updateVector3dNormalOnPrincipalPlaneThroughEdgeId" devLabel="Update of vector from geometry and principal plane failed." translation="" />
	<label commandName="upgradeSurfaceVersionFailed" devLabel="Surface version upgrade failed" translation="" />
	<label commandName="upgradeSurfaceVersionFailed_ccy" devLabel="Surface change upgrade failed" translation="" />
	<label commandName="wallTaperAngle" devLabel="Draft Angle" translation="" />
	<label commandName="wallThickness" devLabel="Thickness" translation="" />
	<label commandName="warningTextMoreRelationshipNames" devLabel=" %1% relationships failed due to missing geometric references.&lt;br/&gt;&lt;br/&gt;Restore geometry to repair relationships or edit relationships and select new geometry." translation="" />
	<label commandName="warningTextRelationshipNames" devLabel="The following relationships failed due to missing geometric references : &lt;br/&gt; %1% &lt;br/&gt; Restore geometry to repair relationships or edit relationships and select new geometry." translation="" />
	<label commandName="xRefChangeSheetMetalDataCommandTooltip" devLabel="Selecting a different rule in a referenced design is not supported." translation="" />
	<label commandName="xRefSwitchPlasticRuleCommandTooltip" devLabel="Assigning a different plastic rule in a referenced design is not supported." translation="" />
</Resource>