<?xml version="1.0" encoding="utf-8"?><Resource>
	<label commandName="AddNewOffset" devLabel="New Offset" translation="Neuer Versatz"/>
	<label commandName="All" devLabel="All" translation="Alle"/>
	<label commandName="AllTooltip" devLabel="Extrudes through all visible bodies." translation="Extrudiert durch alle sichtbaren Körper."/>
	<label commandName="AutomaticOffset" devLabel="Automatic" translation="Automatisch"/>
	<label commandName="BREPConversionFailed" devLabel="T-Spline conversion failed" translation="Fehler bei T-Spline-Konvertierung"/>
	<label commandName="BooleanTypeOperation" devLabel="Operation" translation="Vorgang"/>
	<label commandName="CTCTangentProgationFailed" devLabel="Cannot compute Tangent Chain. Some geometry in the tangent chain is already selected in other selection set rows. Adjust selection sets before enabling Tangent Chain. " translation="Tangentenkette kann nicht berechnet werden. Einige Geometrie in der Tangentenkette ist bereits in anderen Auswahlsatzzeilen ausgewählt. Passen Sie die Auswahlsätze an, bevor Sie die Option Tangentenkette aktivieren. "/>
	<label commandName="ChamferEdges0" devLabel="%1% Edge" translation="%1% Kante"/>
	<label commandName="ChamferEdgesMultiple" devLabel="%1% Edges" translation="%1% Kanten"/>
	<label commandName="ChamferFirstDistanceInput" devLabel="Distance" translation="Abstand"/>
	<label commandName="ChamferRowAngleIcon" devLabel="ChamferRowAngleIcon" translation="FaseZeileWinkelSymbol"/>
	<label commandName="ChamferRowAngleInput" devLabel="Angle" translation="Winkel"/>
	<label commandName="ChamferRowDistanceOneIcon" devLabel="ChamferRowDistanceOneIcon" translation="FaseZeileAbstandEinsSymbol"/>
	<label commandName="ChamferRowDistanceOneInput" devLabel="Distance" translation="Abstand"/>
	<label commandName="ChamferRowDistanceTwoIcon" devLabel="ChamferRowDistanceTwoIcon" translation="FaseZeileAbstandZweiSymbol"/>
	<label commandName="ChamferRowDistanceTwoInput" devLabel="Distance" translation="Abstand"/>
	<label commandName="ChamferRowLabel" devLabel="ChamferRowLabel" translation="FaseZeileBeschriftung"/>
	<label commandName="ConfigAllDisplayNameKey" devLabel="All" translation="Alle"/>
	<label commandName="ConfigFlyParamDetailTooltip" devLabel="Check to configure %1%.&lt;br /&gt;&lt;br /&gt;" translation="Aktivieren Sie diese Option, um %1% zu konfigurieren.&lt;br /&gt;&lt;br /&gt;"/>
	<label commandName="ConfigFlyParamDetailTooltipExpr" devLabel="Expression: %1%&lt;br /&gt;" translation="Ausdruck: %1%&lt;br /&gt;"/>
	<label commandName="ConfigFlyParamDetailTooltipUserName" devLabel="Parameter: %1%&lt;br /&gt;" translation="Parameter: %1%&lt;br /&gt;"/>
	<label commandName="ConfigFlyParamDetailTooltipValue" devLabel="Value: %1%&lt;br /&gt;" translation="Wert: %1%&lt;br /&gt;"/>
	<label commandName="ConfigSuppressionDisplayNameKey" devLabel="Suppression" translation="Unterdrückung"/>
	<label commandName="ConfigurationsRestrictedMessage" devLabel="Create and manage multiple design variations so that you can improve your design efficiency." translation="Erstellen und verwalten Sie mehrere Konstruktionsvarianten, um die Effizienz Ihrer Konstruktionen zu verbessern."/>
	<label commandName="ConfigurationsRestrictedTitle" devLabel="Configurations" translation="Konfigurationen"/>
	<label commandName="ContinueOrRevert" devLabel="Do you want to capture the current position of moved components or revert components to their previous positions?" translation="Möchten Sie die aktuelle Position der verschobenen Komponenten erfassen oder die Komponenten auf ihre vorherigen Positionen zurücksetzen?"/>
	<label commandName="ContinueWithRevert" devLabel="Revert Position" translation="Position wiederherstellen"/>
	<label commandName="ContinueWithSnapshot" devLabel="Capture Position" translation="Position erfassen"/>
	<label commandName="ConvertToPMDesign" devLabel="Change to Parametric Modeling" translation="Zur parametrischen Modellierung wechseln"/>
	<label commandName="ConvertToPMDesignCmdDef" devLabel="Convert to Parametric Modeling desgin" translation="In Konstruktion mit parametrischer Modellierung konvertieren"/>
	<label commandName="ConvertToPMDesignCmdTooltip" devLabel="&lt;b&gt;Change to Parametric Modeling Mode&lt;/b&gt;&lt;br/&gt;&lt;br/&gt;Changes the modeling mode for the design:&lt;ul&gt;&lt;li&gt;&lt;b&gt;Parametric:&lt;/b&gt; Captures parameters and features in the timeline as you create your design.&lt;/li&gt;&lt;li&gt;&lt;b&gt;Direct:&lt;/b&gt; Deletes all parameters and features in the timeline and lets you edit the design more quickly.&lt;/li&gt;&lt;/ul&gt;&lt;b&gt;Current mode: Direct&lt;/b&gt;" translation="&lt;b&gt;In Modus Parametrische Modellierung wechseln&lt;/b&gt;&lt;br/&gt;&lt;br/&gt;Ändert den Modellierungsmodus für die Konstruktion:&lt;ul&gt;&lt;li&gt;&lt;b&gt;Parametrisch:&lt;/b&gt; Erfasst Parameter und Elemente auf der Zeitachse, während Sie Ihre Konstruktion erstellen.&lt;/li&gt;&lt;li&gt;&lt;b&gt;Direkt:&lt;/b&gt; Löscht alle Parameter und Elemente auf der Zeitachse und ermöglicht es Ihnen, die Konstruktion schneller zu bearbeiten.&lt;/li&gt;&lt;/ul&gt;&lt;b&gt;Aktueller Modus: Direkt.&lt;/b&gt;"/>
	<label commandName="CutBody" devLabel="Body Participating In Cut" translation="Körper in Schnitt"/>
	<label commandName="CutComponent" devLabel="Component Participating In Cut" translation="Komponente in Schnitt"/>
	<label commandName="CutType" devLabel="Cut" translation="Ausschneiden"/>
	<label commandName="CutTypeToolTip" devLabel="Cuts an area out of an existing body." translation="Schneidet einen Bereich aus einem vorhandenen Körper aus."/>
	<label commandName="DirectionType" devLabel="Direction" translation="Richtung"/>
	<label commandName="DisableConfigureTab" devLabel="Configure (unavailable) " translation="Konfigurieren (nicht verfügbar) "/>
	<label commandName="DisableConfigureTabReason" devLabel="The Configure tab is unavailable because there are no aspects to configure in the current context. " translation="Die Registerkarte Konfigurieren ist nicht verfügbar, da im aktuellen Kontext keine zu konfigurierenden Darstellungen vorhanden sind. "/>
	<label commandName="Distance" devLabel="Distance" translation="Abstand"/>
	<label commandName="DistanceFieldShell" devLabel="Rounded Shell" translation="Abgerundete Schale"/>
	<label commandName="DistanceFieldShellToolTip" devLabel="Creates rounded offset corners. Use for complex geometry to create a full or partial result that you can modify with surface tools." translation="Erstellt abgerundete Versatzecken. Verwenden Sie diese Option für komplexe Geometrie, um ein vollständiges oder Teilergebnis zu erstellen, das Sie mit Oberflächenwerkzeugen bearbeiten können."/>
	<label commandName="DistanceTooltip" devLabel="Extrudes to a distance that you specify." translation="Extrudiert bis zu einem von Ihnen angegebenen Abstandswert."/>
	<label commandName="DynamicControlID" devLabel="DynamicControlID" translation="ID für dynamische Steuerung"/>
	<label commandName="Edit" devLabel="Edit" translation="Bearbeiten"/>
	<label commandName="EmptyIDConfigOnFlyRequestHelper" devLabel="Unable to configure" translation="Konfiguration nicht möglich"/>
	<label commandName="ExtentsType2" devLabel="Extent Type" translation="Grenztyp"/>
	<label commandName="Extrude" devLabel="Extrude" translation="Extrusion"/>
	<label commandName="ExtrudeDistanceInput" devLabel="Distance" translation="Abstand"/>
	<label commandName="ExtrudeDistanceInputDesc" devLabel="Specify distance to extrude." translation="Geben Sie den Abstand für die Extrusion an."/>
	<label commandName="ExtrudeProfileInput" devLabel="Profiles" translation="Profile"/>
	<label commandName="ExtrudeProfileInputDesc" devLabel="Select coplanar sketch profiles or faces to extrude." translation="Wählen Sie koplanare Skizzierprofile oder Flächen für die Extrusion aus."/>
	<label commandName="ExtrudeSide1TaperAngleInput" devLabel="Taper Angle" translation="Verjüngungswinkel"/>
	<label commandName="ExtrudeSide1TaperAngleInputDesc" devLabel="Specify angle to taper extrusion." translation="Geben Sie den Winkel für die Extrusion der Verjüngung an."/>
	<label commandName="ExtrudeSide2TaperAngleInput" devLabel="Taper Angle" translation="Verjüngungswinkel"/>
	<label commandName="ExtrudeSide2TaperAngleInputDesc" devLabel="Specify angle to taper extrusion." translation="Geben Sie den Winkel für die Extrusion der Verjüngung an."/>
	<label commandName="ExtrudeTaperAngleInput" devLabel="Taper Angle" translation="Verjüngungswinkel"/>
	<label commandName="ExtrudeTaperAngleInputDesc" devLabel="Specify angle to taper extrusion." translation="Geben Sie den Winkel für die Extrusion der Verjüngung an."/>
	<label commandName="ExtrudeTypeDesc" devLabel="Extrudes the entire area within selected closed profiles." translation="Extrudiert den gesamten Bereich innerhalb der ausgewählten geschlossenen Profile."/>
	<label commandName="ExtrudeTypeInfo" devLabel="Extrude" translation="Extrusion"/>
	<label commandName="ExtrudeTypeLabel" devLabel="Type" translation="Typ"/>
	<label commandName="FaceEdges0" devLabel="1 Face" translation="1 Fläche"/>
	<label commandName="FaceEdgesMultiple" devLabel="%1% Faces" translation="%1% Flächen"/>
	<label commandName="FeatureAspectTooltipCof" devLabel="Check to configure %1%." translation="Aktivieren Sie diese Option, um %1% zu konfigurieren."/>
	<label commandName="FeatureAspectValueTooltipCof" devLabel="Value" translation="Wert"/>
	<label commandName="FeatureEdges0" devLabel="1 Feature" translation="1 Element"/>
	<label commandName="FeatureEdgesMultiple" devLabel="%1% Features" translation="%1% Elemente"/>
	<label commandName="FlipDirection" devLabel="Flip" translation="Umkehren"/>
	<label commandName="FlipDirectionTooltip" devLabel="Flips the extrusion over the selected profile plane." translation="Kehrt die Extrusion über die ausgewählte Profilebene um."/>
	<label commandName="FromObjectStart" devLabel="Object" translation="Objekt"/>
	<label commandName="FromObjectStartTooltip" devLabel="Starts extrusion from a face or plane that you select." translation="Beginnt die Extrusion von einer ausgewählten Fläche oder Ebene aus."/>
	<label commandName="FusionActivateLocalCompCmd" devLabel="Activate" translation="Aktivieren"/>
	<label commandName="FusionChamfer" devLabel="Chamfer" translation="Fase"/>
	<label commandName="FusionCmdModifyDistanceSelections3" devLabel="Specify type, direction, thickness, or hold Command to modify selections" translation="Typ, Richtung bzw. Stärke angeben oder BEFEHLSTASTE gedrückt halten, um die Auswahl zu ändern"/>
	<label commandName="FusionComputeAll" devLabel="Compute All" translation="Alle berechnen"/>
	<label commandName="FusionCtrlModifyDistanceSelections3" devLabel="Specify type, direction, thickness, or hold Ctrl to modify selections" translation="Typ, Richtung bzw. Stärke angeben oder STRG-Taste gedrückt halten, um die Auswahl zu ändern"/>
	<label commandName="FusionExtrudeEdit" devLabel="Edit Feature " translation="Element bearbeiten "/>
	<label commandName="FusionFeatureEdit" devLabel="Edit Feature " translation="Element bearbeiten "/>
	<label commandName="FusionMacModifySelectExtrude" devLabel="Hold Command to modify selection" translation="Befehl zum Ändern der Auswahl gedrückt halten"/>
	<label commandName="FusionModifyDistanceSelections3" devLabel="Select a body to shell or faces to remove." translation="Wählen Sie einen Körper für die Schale oder Flächen zum Entfernen aus."/>
	<label commandName="FusionOffsetFaces" devLabel="Offset Face" translation="Fläche versetzen"/>
	<label commandName="FusionOffsetFacesEdit" devLabel="Edit Feature " translation="Element bearbeiten "/>
	<label commandName="FusionSelectDistanceExtrude" devLabel="Specify distance and taper angle" translation="Abstand und Verjüngungswinkel angeben"/>
	<label commandName="FusionSelectDistanceThinExtrude" devLabel="Specify wall thickness, distance, and taper angle" translation="Wandstärke, Abstand und Verjüngungswinkel angeben"/>
	<label commandName="FusionSelectExtrudeToObject" devLabel="Select body, face, plane, or vertex to extrude to" translation="Körper, Fläche, Ebene oder Scheitelpunkt zum Extrudieren auswählen"/>
	<label commandName="FusionSelectFaceForOffset" devLabel="Select face(s) to offset" translation="Zu versetzende Fläche(n) auswählen"/>
	<label commandName="FusionSelectFaceShell" devLabel="Select faces to remove or body to shell" translation="Zu entfernende Flächen oder in Schale zu konvertierenden Körper auswählen"/>
	<label commandName="FusionSelectProfileExtrude" devLabel="Select sketch profiles or planar faces to extrude" translation="Skizzierprofile oder ebene Flächen zum Extrudieren auswählen"/>
	<label commandName="FusionSelectSketchProfileExtrude" devLabel="Select sketch profiles, sketch curves or planar faces to extrude" translation="Skizzierprofile, Skizzierkurven oder ebene Fläche zum Extrudieren auswählen"/>
	<label commandName="FusionShellBody" devLabel="Shell" translation="Schale"/>
	<label commandName="FusionStatusHandlerASMMissesProcess" devLabel="Rail misses the profile" translation="Verlaufsführung hat kein Profil"/>
	<label commandName="FusionStatusHandlerASMPointProcess" devLabel="self-intersection or bad geometry" translation="Selbstüberschneidung oder fehlerhafte Geometrie"/>
	<label commandName="FusionStatusHandlerASMSmoothProcess" devLabel="Rail is not smooth" translation="Verlaufsführung ist nicht glatt"/>
	<label commandName="FusionSurfaceExtrudeEdit" devLabel="Edit Feature " translation="Element bearbeiten "/>
	<label commandName="FusionWinModifySelectExtrude" devLabel="Hold Ctrl to modify selection" translation="Zum Ändern der Auswahl STRG-Taste gedrückt halten"/>
	<label commandName="HalfLength" devLabel="Half Length" translation="Halbe Länge"/>
	<label commandName="HalfLengthTooltip" devLabel="Extrudes the specified distance to each side." translation="Extrudiert den angegebenen Abstand zu jeder Seite."/>
	<label commandName="HoleDepthInput" devLabel="Depth" translation="Tiefe"/>
	<label commandName="HoleDiameterInput" devLabel="Diameter" translation="Durchmesser"/>
	<label commandName="Incorrect_Sketch_Profile_normal" devLabel="The profile normal is reversed. It'll cause extrude direction flip. Try compute-all to recover before creating extrude." translation="Die Normale des Profils wird umgekehrt. Dadurch wird die Extrusionsrichtung umgekehrt. Verwenden Sie Alle berechnen zum Wiederherstellen, bevor Sie die Extrusion erstellen."/>
	<label commandName="InputShellType" devLabel="Shell Type" translation="Wandungstyp"/>
	<label commandName="IntersectType" devLabel="Intersect" translation="Schnittmenge"/>
	<label commandName="IntersectTypeToolTip" devLabel="Creates a body at the intersection of an existing body and the new body." translation="Erstellt einen Körper am Schnittpunkt eines vorhandenen Körpers mit dem neuen Körper."/>
	<label commandName="InvisibleObjectWarningMsg" devLabel="The object that you are creating is not visible. Please toggle visibility in the browser." translation="Das Objekt, das Sie erstellen, ist nicht sichtbar. Schalten Sie die Sichtbarkeit im Browser um."/>
	<label commandName="JoinType" devLabel="Join" translation="Verbinden"/>
	<label commandName="JoinTypeToolTip" devLabel="Combines the new body with an existing body." translation="Kombiniert den neuen Körper mit einem vorhandenen Körper."/>
	<label commandName="LegacyShell" devLabel="Sharp Shell" translation="Scharfkantige Schale"/>
	<label commandName="LegacyShellToolTip" devLabel="Creates sharp offset corners." translation="Erstellt scharfe Versatzecken."/>
	<label commandName="LoftChainingOption" devLabel="Chaining" translation="Verkettung"/>
	<label commandName="LoftChainingOptionDesc" devLabel="Automatically select connected geometry." translation="Verbundene Geometrie automatisch auswählen."/>
	<label commandName="MatchShape2" devLabel="Extend" translation="Dehnen"/>
	<label commandName="MaxSolutionTooltip" devLabel="Extrudes all the way through the selected body." translation="Extrudiert den gesamten Weg durch den ausgewählten Körper."/>
	<label commandName="MissingExtrudeProfile" devLabel="missing profiles" translation="fehlende Profile"/>
	<label commandName="MissingOffsetFaces" devLabel="missing faces" translation="fehlende Flächen"/>
	<label commandName="MissingShellFaces" devLabel="missing faces/body" translation="fehlende Flächen/Körper"/>
	<label commandName="ModifyExistingOffset" devLabel="Modify Existing Feature" translation="Vorhandenes Element ändern"/>
	<label commandName="NewBodyInNewCompType" devLabel="New Component" translation="Neue Komponente"/>
	<label commandName="NewBodyInNewCompTypeToolTip" devLabel="Creates a new body in the new component." translation="Erstellt einen neuen Körper in der neuen Komponente."/>
	<label commandName="NewBodyType" devLabel="New Body" translation="Neuer Körper"/>
	<label commandName="NewBodyTypeToolTip" devLabel="Creates a new body in the active component." translation="Erstellt einen neuen Körper in der aktiven Komponente."/>
	<label commandName="NewTSplineBodyType" devLabel="New Body" translation="Neuer Körper"/>
	<label commandName="NewTSplineBodyTypeToolTip" devLabel="Creates a new body in the active component." translation="Erstellt einen neuen Körper in der aktiven Komponente."/>
	<label commandName="OffsetFacesDistanceInput" devLabel="Distance" translation="Abstand"/>
	<label commandName="OffsetFacesFacesInput" devLabel="Faces" translation="Flächen"/>
	<label commandName="OffsetPlaneStart" devLabel="Offset" translation="Versatz"/>
	<label commandName="OffsetPlaneStartTooltip" devLabel="Starts extrusion a specified offset distance from the profile plane." translation="Beginnt die Extrusion mit einem bestimmten Versatzabstand von der Profilebene."/>
	<label commandName="OffsetType" devLabel="Offset Type" translation="Versatztyp"/>
	<label commandName="OneSide" devLabel="One Side" translation="Eine Seite"/>
	<label commandName="OneSideTooltip" devLabel="Creates an extrusion on one side of the profile plane." translation="Erstellt eine Extrusion auf einer Seite der Profilebene."/>
	<label commandName="PositionDlgTitle" devLabel="Capture or revert component positions" translation="Komponentenpositionen erfassen oder wiederherstellen"/>
	<label commandName="PrimitivePlacementInput" devLabel="Placement" translation="Platzierung"/>
	<label commandName="ProfilePlaneStart" devLabel="Profile Plane" translation="Profilebene"/>
	<label commandName="ProfilePlaneStartTooltip" devLabel="Starts extrusion from the profile plane." translation="Beginnt die Extrusion von der Profilebene aus."/>
	<label commandName="ProfileStartType" devLabel="Start" translation="Starten"/>
	<label commandName="ReblendRadiusInput" devLabel="Radius" translation="Radius"/>
	<label commandName="RevertMovesPrompt" devLabel="Some component positions have changed.&#xA;&#xA;" translation="Einige Komponentenpositionen wurden geändert.&#xA;&#xA;"/>
	<label commandName="RevolveAlongAngleInput" devLabel="Angle" translation="Winkel"/>
	<label commandName="RotateLocalXInput" devLabel="'X' Rotation" translation="'X'-Drehung"/>
	<label commandName="RotateLocalYInput" devLabel="'Y' Rotation" translation="'Y'-Drehung"/>
	<label commandName="RotateLocalZInput" devLabel="'Z' Rotation" translation="'Z'-Drehung"/>
	<label commandName="SelectStartFromObject" devLabel="Select face, plane, or vertex to extrude from" translation="Fläche, Ebene oder Scheitelpunkt für die Extrusion auswählen"/>
	<label commandName="ShellBodyFacesInput" devLabel="Faces/Body" translation="Flächen/Körper"/>
	<label commandName="ShellBodyThicknessInsideInput" devLabel="Inside Thickness" translation="Innere Dicke"/>
	<label commandName="ShellBodyThicknessInsideInputDesc" devLabel="Specify thickness for inside direction" translation="Dicke für Innenrichtung angeben"/>
	<label commandName="ShellBodyThicknessOutsideInput" devLabel="Outside Thickness" translation="Äußere Dicke"/>
	<label commandName="ShellBodyThicknessOutsideInputDesc" devLabel="Specify thickness for outside direction" translation="Dicke für Außenrichtung angeben"/>
	<label commandName="ShellBothDirection" devLabel="Both" translation="Beide"/>
	<label commandName="ShellDirection" devLabel="Direction" translation="Richtung"/>
	<label commandName="ShellInsideDirection" devLabel="Inside" translation="Innen"/>
	<label commandName="ShellOutsideDirection" devLabel="Outside" translation="Außen"/>
	<label commandName="ShellTangentOptionInput" devLabel="Tangent Chain" translation="Tangentenkette"/>
	<label commandName="Side1ExtentsType" devLabel="Extent Type" translation="Grenztyp"/>
	<label commandName="Side1ExtrudeDistanceInput" devLabel="Distance" translation="Abstand"/>
	<label commandName="Side1ExtrudeDistanceInputDesc" devLabel="Extrudes to a distance that you specify." translation="Extrudiert bis zu einem von Ihnen angegebenen Abstandswert."/>
	<label commandName="Side1Group" devLabel="Side 1" translation="Seite 1"/>
	<label commandName="Side1MatchShape" devLabel="Extend" translation="Dehnen"/>
	<label commandName="Side1SolutionType" devLabel="Extend" translation="Dehnen"/>
	<label commandName="Side1ThinExtrudeWallLocation" devLabel="Wall Location" translation="Wandposition"/>
	<label commandName="Side1ThinExtrudeWallThickness" devLabel="Wall Thickness" translation="Wandstärke"/>
	<label commandName="Side1ThinExtrudeWallThicknessDesc" devLabel="Specify wall thickness for thin extrusion." translation="Geben Sie die Wandstärke für eine dünne Extrusion an."/>
	<label commandName="Side1ToObjectOffsetInput" devLabel="Offset" translation="Versatz"/>
	<label commandName="Side1ToObjectOffsetInputDesc" devLabel="Extrudes to a body, face, or plane that you select." translation="Extrudiert zu einem Körper, einer Fläche oder einer Ebene, den/die Sie auswählen."/>
	<label commandName="Side1ToObjectSelectInfo" devLabel="Object" translation="Objekt"/>
	<label commandName="Side1ToObjectSelectInfoDesc" devLabel="Select a body, face, or construction object to extrude to." translation="Wählen Sie einen Körper, eine Fläche oder ein Konstruktionsobjekt aus, zu dem/der extrudiert werden soll."/>
	<label commandName="Side2ExtentsType" devLabel="Extent Type" translation="Grenztyp"/>
	<label commandName="Side2Group" devLabel="Side 2" translation="Seite 2"/>
	<label commandName="Side2MatchShape" devLabel="Extend" translation="Dehnen"/>
	<label commandName="Side2SolutionType" devLabel="Extend" translation="Dehnen"/>
	<label commandName="Side2ThinExtrudeWallLocation" devLabel="Wall Location" translation="Wandposition"/>
	<label commandName="Side2ThinExtrudeWallThickness" devLabel="Wall Thickness" translation="Wandstärke"/>
	<label commandName="Side2ThinExtrudeWallThicknessDesc" devLabel="Specify wall thickness for thin extrusion." translation="Geben Sie die Wandstärke für eine dünne Extrusion an."/>
	<label commandName="Side2ToObjectOffsetInput" devLabel="Offset" translation="Versatz"/>
	<label commandName="Side2ToObjectSelectInfo" devLabel="Object" translation="Objekt"/>
	<label commandName="Side2ToObjectSelectInfoDesc" devLabel="Select a body, face, or construction object to extrude to." translation="Wählen Sie einen Körper, eine Fläche oder ein Konstruktionsobjekt aus, zu dem/der extrudiert werden soll."/>
	<label commandName="SolutionType" devLabel="Extend" translation="Dehnen"/>
	<label commandName="SphereDiameter" devLabel="Diameter" translation="Durchmesser"/>
	<label commandName="SurfaceExtrude" devLabel="Extrude" translation="Extrusion"/>
	<label commandName="Symmetric" devLabel="Symmetric" translation="Symmetrisch"/>
	<label commandName="SymmetricDistanceMeasurementType" devLabel="Measurement" translation="Messung"/>
	<label commandName="SymmetricTooltip" devLabel="Creates identical extrusions on each side of the profile plane." translation="Erstellt identische Extrusionen auf jeder Seite der Profilebene."/>
	<label commandName="TSplinePipeEditEntityModify" devLabel="Modifying this sketch, edge or component will dissolve the Sculpt Pipe feature.  Undo to maintain Sculpt Pipe feature." translation="Durch Ändern dieser Skizze, Kante oder Komponente wird das Rohrformungselement aufgelöst. Machen Sie den Vorgang rückgängig, um das Rohrformungselement beizubehalten."/>
	<label commandName="TSplineSurfaceCreatedByPipe1" devLabel="Modifying the selected entity will dissolve the Sculpt Pipe feature.  Cancel to maintain Sculpt Pipe feature." translation="Durch Ändern des ausgewählten Objekts wird das Rohrformungselement aufgelöst. Brechen Sie den Vorgang ab, um das Rohrformungselement beizubehalten."/>
	<label commandName="TSplineSurfaceCreatedByPipe2" devLabel="Deleting the selected entity will dissolve the Sculpt Pipe feature.  Undo to maintain Sculpt Pipe feature." translation="Durch das Löschen des ausgewählten Objekts lösen Sie die Leitung.  Rückgängig, um die Formen von Element."/>
	<label commandName="ThinExtrudeTypeDesc" devLabel="Extrudes a thin wall along selected open or closed profiles." translation="Extrudiert eine dünne Wand entlang ausgewählter offener oder geschlossener Profile."/>
	<label commandName="ThinExtrudeTypeInfo" devLabel="Thin Extrude" translation="Dünne Extrusion"/>
	<label commandName="ThinExtrudeWallLocation" devLabel="Wall Location" translation="Wandposition"/>
	<label commandName="ThinExtrudeWallLocationCenter" devLabel="Center" translation="Mitte"/>
	<label commandName="ThinExtrudeWallLocationCenterDesc" devLabel="Centers the extrusion on the profile." translation="Zentriert die Extrusion auf dem Profil."/>
	<label commandName="ThinExtrudeWallLocationSide1" devLabel="Side 1" translation="Seite 1"/>
	<label commandName="ThinExtrudeWallLocationSide1Desc" devLabel="Offsets extrusion to one side of the profile." translation="Versetzt die Extrusion auf eine Seite des Profils."/>
	<label commandName="ThinExtrudeWallLocationSide2" devLabel="Side 2" translation="Seite 2"/>
	<label commandName="ThinExtrudeWallLocationSide2Desc" devLabel="Offsets extrusion to one side of the profile." translation="Versetzt die Extrusion auf eine Seite des Profils."/>
	<label commandName="ThinExtrudeWallThickness" devLabel="Wall Thickness" translation="Wandstärke"/>
	<label commandName="ThinExtrudeWallThicknessDesc" devLabel="Specify wall thickness for thin extrusion." translation="Geben Sie die Wandstärke für eine dünne Extrusion an."/>
	<label commandName="ThroughBody" devLabel="Through Body" translation="Durch Körper"/>
	<label commandName="ToAdjacentFaces" devLabel="To Adjacent Faces" translation="Zu angrenzenden Flächen"/>
	<label commandName="ToAdjacentFacesTooltip" devLabel="Extrudes up to the selected face and any adjacent faces." translation="Extrudiert bis zur ausgewählten Fläche und zu allen angrenzenden Flächen."/>
	<label commandName="ToBody" devLabel="To Body" translation="Zu Körper"/>
	<label commandName="ToBodyTooltip" devLabel="Extrudes up to the faces of the selected body." translation="Extrudiert bis zu den Flächen des ausgewählten Körpers."/>
	<label commandName="ToNext" devLabel="To Next" translation="Auf Nächsten"/>
	<label commandName="ToObject" devLabel="To Object" translation="Auf Objekt"/>
	<label commandName="ToObjectOffsetInput" devLabel="Offset" translation="Versatz"/>
	<label commandName="ToObjectOffsetInputDesc" devLabel="Specify distance to offset extrusion from selected object." translation="Geben Sie den Abstand für den Versatz der Extrusion vom ausgewählten Objekt an."/>
	<label commandName="ToObjectTooltip" devLabel="Extrudes to a body, face, or plane that you select." translation="Extrudiert zu einem Körper, einer Fläche oder einer Ebene, den/die Sie auswählen."/>
	<label commandName="ToSelectedFace" devLabel="To Selected Face" translation="Zur ausgewählten Fläche"/>
	<label commandName="ToSelectedFaceTooltip" devLabel="Extrudes up to the selected face only." translation="Extrudiert nur bis zur ausgewählten Fläche."/>
	<label commandName="TwoSides" devLabel="Two Sides" translation="Zwei Seiten"/>
	<label commandName="TwoSidesTooltip" devLabel="Creates a unique extrusion on each side of the profile plane." translation="Erstellt eine eindeutige Extrusion auf jeder Seite der Profilebene."/>
	<label commandName="WholeLength" devLabel="Whole Length" translation="Gesamte Länge"/>
	<label commandName="WholeLengthTooltip" devLabel="Extrudes half the specified distance to each side." translation="Extrudiert die Hälfte des angegebenen Abstands zu jeder Seite."/>
	<label commandName="angleDistanceColumnTooltip" devLabel="Specify angle value." translation="Geben Sie einen Winkelwert an."/>
	<label commandName="blockDrivenAspectTooltipCof" devLabel="%1% is configured as it is dependent on %2%." translation="%1% wird konfiguriert, da das Element von %2% abhängig ist."/>
	<label commandName="boxLengthInput" devLabel="Length" translation="Länge"/>
	<label commandName="boxWidthInput" devLabel="Width" translation="Breite"/>
	<label commandName="chamferAddTCI" devLabel="Add" translation="Hinzufügen"/>
	<label commandName="chamferAddTableTooltip" devLabel="Add selection set." translation="Fügen Sie einen Auswahlsatz hinzu."/>
	<label commandName="chamferAngleDistanceSelection" devLabel="Distance and Angle" translation="Abstand und Winkel"/>
	<label commandName="chamferAngleDistanceTooltip" devLabel="Bevels edges based on a single distance and an angle." translation="Schrägt Kanten auf Grundlage eines einzelnen Abstands und eines Winkels ab."/>
	<label commandName="chamferBlendSelection" devLabel="Blend" translation="Mischen"/>
	<label commandName="chamferBlendTooltip" devLabel="Blends beveled edges into adjacent faces." translation="Mischt abgeschrägte Kanten mit benachbarten Flächen."/>
	<label commandName="chamferCornerTypeSelection" devLabel="Corner Type" translation="Ecktyp"/>
	<label commandName="chamferCtrlMacModifyDistanceSelections" devLabel="Hold Command to modify selection" translation="Zum Ändern der Auswahl BEFEHLSTASTE gedrückt halten"/>
	<label commandName="chamferCtrlWinModifyDistanceSelections" devLabel="Hold Ctrl to modify selection" translation="Zum Ändern der Auswahl STRG-Taste gedrückt halten"/>
	<label commandName="chamferDMEdges" devLabel="Edges/Faces" translation="Kanten/Flächen"/>
	<label commandName="chamferDefaultCursorPrompt" devLabel="Select edges, faces, or features to chamfer" translation="Kanten, Flächen oder Elemente zum Fasen auswählen"/>
	<label commandName="chamferEdgesFacesSelectionCursorPrompt" devLabel="Select edges or faces to chamfer" translation="Kanten oder Flächen zum Fasen auswählen"/>
	<label commandName="chamferEqualDistanceColumnTooltip" devLabel="Distance value is equal." translation="Der Abstandswert ist gleich."/>
	<label commandName="chamferEqualDistanceSelection" devLabel="Equal Distance" translation="Gleicher Abstand"/>
	<label commandName="chamferEqualDistanceTooltip" devLabel="Bevels edges based on an equal distance to each side." translation="Schrägt Kanten auf Grundlage eines gleichen Abstands zu jeder Seite ab."/>
	<label commandName="chamferFlipSelection" devLabel="Flip" translation="Umkehren"/>
	<label commandName="chamferFlipTooltip" devLabel="Flips first and second sides of chamfer." translation="Kehrt die erste und zweite Seite der Fase um."/>
	<label commandName="chamferMiterSelection" devLabel="Miter" translation="Gehrung"/>
	<label commandName="chamferMiterTooltip" devLabel="Merges beveled edges into a mitered corner point." translation="Verbindet abgeschrägte Kanten zu einem Eckpunkt mit Gehrung."/>
	<label commandName="chamferPMEdges" devLabel="Edges/Faces/Features" translation="Kanten/Flächen/Elemente"/>
	<label commandName="chamferRemoveTCI" devLabel="Remove" translation="Entfernen"/>
	<label commandName="chamferRemoveTableTooltip" devLabel="Remove selection set." translation="Entfernen Sie den Auswahlsatz."/>
	<label commandName="chamferRowSelection" devLabel="Selection Set" translation="Auswahlsatz"/>
	<label commandName="chamferSelection" devLabel="Chamfer" translation="Fase"/>
	<label commandName="chamferSelectionTable" devLabel="SelectionChamferTable" translation="AuswahlFaseTabelle"/>
	<label commandName="chamferSpecifyAngleDistance" devLabel="Specify chamfer distance and angle" translation="Fasenabstand und -winkel angeben"/>
	<label commandName="chamferSpecifyDistance" devLabel="Specify chamfer distance" translation="Fasenabstand angeben"/>
	<label commandName="chamferSpecifyTwoDistance" devLabel="Specify chamfer distances" translation="Fasenabstände angeben"/>
	<label commandName="chamferStringDMEdges" devLabel="Select edges or faces to create chamfers." translation="Wählen Sie Kanten oder Flächen aus, um Fasen zu erstellen."/>
	<label commandName="chamferStringPMEdges" devLabel="Select edges, faces, or features to create chamfers." translation="Wählen Sie Kanten, Flächen oder Elemente aus, um Fasen zu erstellen."/>
	<label commandName="chamferTangentSelection" devLabel="Tangent Chain" translation="Tangentenkette"/>
	<label commandName="chamferTangentTooltip" devLabel="Automatically select tangent geometry." translation="Wählen Sie automatisch tangentiale Geometrie aus."/>
	<label commandName="chamferTooltip" devLabel="Creates a chamfer to join beveled edges at the corner." translation="Erstellt eine Fase, um abgeschrägte Kanten an der Ecke zu verbinden."/>
	<label commandName="chamferTwoDistanceColumnTooltip" devLabel="Specify second distance value." translation="Geben Sie den zweiten Abstandswert an."/>
	<label commandName="chamferTwoDistanceSelection" devLabel="Two Distance" translation="Zwei Abstände"/>
	<label commandName="chamferTwoDistanceTooltip" devLabel="Bevels edges based on a different distance to each side." translation="Schrägt Kanten auf Grundlage eines unterschiedlichen Abstands zu jeder Seite ab."/>
	<label commandName="chamferTypeSelection" devLabel="Type" translation="Typ"/>
	<label commandName="cutCheckBoxes" devLabel="Check Boxes for Participants" translation="Kontrollkästchen für Teilnehmer"/>
	<label commandName="cutParticipantTable" devLabel="Cut Participant Table" translation="Teilnehmertabelle ausschneiden"/>
	<label commandName="cutTableGroup" devLabel="Objects To Cut" translation="Objekte zum Ausschneiden"/>
	<label commandName="cylinderDiameterInput" devLabel="Diameter" translation="Durchmesser"/>
	<label commandName="dConfigConfigureTab" devLabel="Configure" translation="Konfigurieren"/>
	<label commandName="dConfigFeatureTab" devLabel="Feature" translation="Element"/>
	<label commandName="dConfigTabBar" devLabel="Design Configure Tabbar" translation="Registerkartenleiste Konstruktion konfigurieren"/>
	<label commandName="disOneInput" devLabel="Distance 1" translation="Abstand 1"/>
	<label commandName="disTwoInput" devLabel="Distance 2" translation="Abstand 2"/>
	<label commandName="distanceOneColumnSelection" devLabel="Specify distance value." translation="Geben Sie den Abstandswert an."/>
	<label commandName="infoChamferRowAngleIcon" devLabel="infoChamferAngleIcon%1%" translation="infoChamferAngleIcon%1%"/>
	<label commandName="infoChamferRowAngleInput" devLabel="infoChamferAngleInput%1%" translation="infoChamferAngleInput%1%"/>
	<label commandName="infoChamferRowDistanceOneIcon" devLabel="infoChamferDistanceOneIcon%1%" translation="infoChamferDistanceOneIcon%1%"/>
	<label commandName="infoChamferRowDistanceOneInput" devLabel="infoChamferDistanceOneInput%1%" translation="infoChamferDistanceOneInput%1%"/>
	<label commandName="infoChamferRowDistanceTwoIcon" devLabel="infoChamferDistanceTwoIcon%1%" translation="infoChamferDistanceTwoIcon%1%"/>
	<label commandName="infoChamferRowDistanceTwoInput" devLabel="infoChamferDistanceTwoInput%1%" translation="infoChamferDistanceTwoInput%1%"/>
	<label commandName="infoChamferRowLabel" devLabel="infoChamferTableRowLabel%1%" translation="infoChamferTableRowLabel%1%"/>
	<label commandName="lclShellTangentChainToolTip" devLabel="Automatically select tangent geometry" translation="Tangentiale Geometrie automatisch auswählen"/>
	<label commandName="lczlExpression" devLabel="Expression: " translation="Ausdruck: "/>
	<label commandName="lczlParameterName" devLabel="Parameter: " translation="Parameter: "/>
	<label commandName="lczlValue" devLabel="Value: " translation="Wert: "/>
	<label commandName="primitiveHeightInput" devLabel="Height" translation="Höhe"/>
	<label commandName="profileStartFromObjectSelectInfo" devLabel="Object" translation="Objekt"/>
	<label commandName="profileStartFromObjectSelectInfoDesc" devLabel="Select a face or plane to start extrusion from." translation="Wählen Sie eine Fläche oder Ebene aus, von der aus die Extrusion beginnt."/>
	<label commandName="profileStartOffsetDesc" devLabel="Specify distance to offset extrusion from profile plane." translation="Geben Sie den Abstand für den Versatz der Extrusion von der Profilebene an."/>
	<label commandName="profileStartOffsetoffset" devLabel="Offset" translation="Versatz"/>
	<label commandName="toObjectSelectInfo" devLabel="Object" translation="Objekt"/>
	<label commandName="toObjectSelectInfoDesc" devLabel="Select a body, face, or construction object to extrude to." translation="Wählen Sie einen Körper, eine Fläche oder ein Konstruktionsobjekt aus, zu dem/der extrudiert werden soll."/>
</Resource>