# Copyright (C) 2022 The Qt Company Ltd.
# SPDX-License-Identifier: BSD-3-Clause

#
#  W A R N I N G
#  -------------
#
# This file is not part of the Qt API.  It exists purely as an
# implementation detail.  This file, and its contents may change from version to
# version without notice, or even be removed.
#
# We mean it.

set(_qt_internal_skip_build_test_env_var
    "QT_CMAKE_SKIP_BUILD_TESTS")
set(_qt_internal_skip_build_test_message
    "Skipping build test as requested by ${_qt_internal_skip_build_test_env_var}")
set(_qt_internal_skip_build_test_regex
    "^${_qt_internal_skip_build_test_message}\n$")
set(_qt_internal_skip_build_test_pre_run
    "if(DEFINED ENV{${_qt_internal_skip_build_test_env_var}})"
      "message(\"${_qt_internal_skip_build_test_message}\")"
      "return()"
    "endif()"
)

message(STATUS "CMAKE_VERSION: ${CMAKE_VERSION}")
message(STATUS "CMAKE_PREFIX_PATH: ${CMAKE_PREFIX_PATH}")
message(STATUS "CMAKE_MODULES_UNDER_TEST: ${CMAKE_MODULES_UNDER_TEST}")

# Generate a shell script wrapper that calls ninja with -v parameter.
# Upstream issue to allow specifying custom build tool options when using ctest's --build-and-test
# https://gitlab.kitware.com/cmake/cmake/-/issues/22443.
# Only one file is created that is used by all tests.
function(_qt_internal_get_ninja_wrapper ninja_path out_wrapper_path)
    if(QT_INTERNAL_CTEST_NINJA_WRAPPER AND EXISTS "${QT_INTERNAL_CTEST_NINJA_WRAPPER}")
        set(${out_wrapper_path} "${QT_INTERNAL_CTEST_NINJA_WRAPPER}" PARENT_SCOPE)
        return()
    endif()

    if(NOT ninja_path)
        message(FATAL_ERROR "Invalid ninja path specified: '${ninja_path}'.")
    endif()

    set(wrapper_extension "")

    if(NOT CMAKE_HOST_UNIX)
        set(wrapper_extension ".bat")
    endif()

    set(script_name "qt-internal-ninja")

    # the libexec literal is used on purpose for the source, so the file is found
    # on Windows hosts.
    set(wrapper_rel_path "libexec/${script_name}${wrapper_extension}.in")

    # Need to find the libexec input file depending whether the qtbase sources are available.
    # This mirrors the logic in qt_set_up_build_internals_paths.
    # TODO: Clean this up, together with qt_set_up_build_internals_paths to only use the
    # the qtbase sources when building qtbase. And perhaps also when doing a non-prefix
    # developer-build.
    set(qtbase_wrapper_in_path "${QT_SOURCE_TREE}/${wrapper_rel_path}")
    set(installed_wrapper_in_path
        "${_qt_cmake_dir}/${QT_CMAKE_EXPORT_NAMESPACE}/${wrapper_rel_path}")

    # qtbase sources available, always use them, regardless of prefix or non-prefix builds.
    if(EXISTS "${qtbase_wrapper_in_path}")
        set(wrapper_in "${qtbase_wrapper_in_path}")

    # qtbase sources unavailable, use installed files.
    elseif(EXISTS "${installed_wrapper_in_path}")
        set(wrapper_in "${installed_wrapper_in_path}")
    else()
        message(FATAL_ERROR "Can't find ${script_name}${wrapper_extension}.in file.")
    endif()

    set(wrapper_out "${CMAKE_BINARY_DIR}/.qt/${script_name}${wrapper_extension}")

    set(original_ninja "${ninja_path}")
    set(ninja_arguments "-v")

    configure_file("${wrapper_in}" "${wrapper_out}" @ONLY)

    set(QT_INTERNAL_CTEST_NINJA_WRAPPER "${wrapper_out}" CACHE STRING
        "Internal Qt ninja wrapper for ctest tests")

    set(${out_wrapper_path} "${QT_INTERNAL_CTEST_NINJA_WRAPPER}" PARENT_SCOPE)
endfunction()

# The function collects configuring options for the test projects generated by Qt cmake tests.
# Arguments:
#   OUT_PREFIX_PATH <variable name>: stores the CMAKE_PREFIX_PATH value in the output variable.
function(_qt_internal_get_cmake_test_configure_options out_var)
    cmake_parse_arguments(arg "" "OUT_PREFIX_PATH" "" ${ARGN})
    set(option_list)

    if (CMAKE_C_COMPILER AND NOT CMAKE_CROSSCOMPILING)
        list(APPEND option_list "-DCMAKE_C_COMPILER=${CMAKE_C_COMPILER}")
    endif()

    if (CMAKE_CXX_COMPILER AND NOT CMAKE_CROSSCOMPILING)
        list(APPEND option_list "-DCMAKE_CXX_COMPILER=${CMAKE_CXX_COMPILER}")
    endif()

    get_cmake_property(is_multi_config GENERATOR_IS_MULTI_CONFIG)
    if(is_multi_config)
        if(CMAKE_CONFIGURATION_TYPES)
            string(REPLACE ";" "\;" configuration_types "${CMAKE_CONFIGURATION_TYPES}")
            list(APPEND option_list "-DCMAKE_CONFIGURATION_TYPES=${configuration_types}")
        endif()
    else()
        if(CMAKE_BUILD_TYPE)
            list(APPEND option_list "-DCMAKE_BUILD_TYPE=${CMAKE_BUILD_TYPE}")
        endif()
    endif()

    if (CMAKE_TOOLCHAIN_FILE)
        file(TO_CMAKE_PATH "${CMAKE_TOOLCHAIN_FILE}" _CMAKE_TOOLCHAIN_FILE)
        list(APPEND option_list "-DCMAKE_TOOLCHAIN_FILE=${_CMAKE_TOOLCHAIN_FILE}")
    endif()

    if (CMAKE_VERBOSE_MAKEFILE)
        list(APPEND option_list "-DCMAKE_VERBOSE_MAKEFILE=1")
    endif()

    if (NO_GUI)
        list(APPEND option_list "-DNO_GUI=True")
    endif()
    if (NO_WIDGETS)
        list(APPEND option_list "-DNO_WIDGETS=True")
    endif()
    if (NO_OPENGL)
        list(APPEND option_list "-DNO_OPENGL=True")
    endif()
    if (NO_DBUS)
        list(APPEND option_list "-DNO_DBUS=True")
    endif()

    list(APPEND option_list "-DCMAKE_MESSAGE_LOG_LEVEL=DEBUG")
    list(APPEND option_list "-DCMAKE_AUTOGEN_VERBOSE=TRUE")
    if(QT_BUILD_DIR)
        list(APPEND option_list "-DQT_BUILD_DIR=${QT_BUILD_DIR}")
    endif()

    # Forward whatever hints were used in find_package(Qt6) to the ctest configure
    foreach(hint IN ITEMS Qt6_ROOT QT6_ROOT)
        if(DEFINED ${hint})
            list(APPEND option_list "-D${hint}=${${hint}}")
        endif()
    endforeach()

    # Pass a variable that can serve as a marker for cmake build tests in other build system code.
    list(APPEND option_list "-DQT_INTERNAL_IS_CMAKE_BUILD_TEST=ON")

    if(APPLE AND CMAKE_OSX_ARCHITECTURES)
        list(LENGTH CMAKE_OSX_ARCHITECTURES osx_arch_count)

        # When Qt is built as universal config (macOS or iOS), force CMake build tests to build one
        # architecture instead of all of them, because the build machine that builds the cmake tests
        # might not have a universal SDK installed.
        if(osx_arch_count GREATER 1)
            list(APPEND option_list "-DQT_FORCE_SINGLE_QT_OSX_ARCHITECTURE=ON")
        endif()
    endif()

    foreach(module ${CMAKE_MODULES_UNDER_TEST})
        list(APPEND option_list
            "-DCMAKE_${module}_MODULE_MAJOR_VERSION=${CMAKE_${module}_MODULE_MAJOR_VERSION}"
            "-DCMAKE_${module}_MODULE_MINOR_VERSION=${CMAKE_${module}_MODULE_MINOR_VERSION}"
            "-DCMAKE_${module}_MODULE_PATCH_VERSION=${CMAKE_${module}_MODULE_PATCH_VERSION}"
        )
    endforeach()

    _qt_internal_get_build_vars_for_external_projects(
        PREFIXES_VAR prefixes
        ADDITIONAL_PACKAGES_PREFIXES_VAR additional_prefixes
    )

    if(arg_OUT_PREFIX_PATH)
      set(${arg_OUT_PREFIX_PATH} "${prefixes}" PARENT_SCOPE)
    endif()

    string(REPLACE ";" "\;" prefixes "${prefixes}")
    list(APPEND option_list "-DCMAKE_PREFIX_PATH=${prefixes}")
    list(APPEND option_list "-DQT_ADDITIONAL_PACKAGES_PREFIX_PATH=${additional_prefixes}")

    set(${out_var} "${option_list}" PARENT_SCOPE)
endfunction()

function(_qt_internal_set_up_test_run_environment testname)
    set(no_value_options NO_PLUGIN_PATH)
    set(single_value_options "")
    set(multi_value_options "")
    cmake_parse_arguments(PARSE_ARGV 1 arg
        "${no_value_options}" "${single_value_options}" "${multi_value_options}"
    )

    # This is copy-pasted from qt_add_test and adapted to the standalone project case.
    if(CMAKE_HOST_SYSTEM_NAME STREQUAL "Windows")
        set(QT_PATH_SEPARATOR "\\;")
    else()
        set(QT_PATH_SEPARATOR ":")
    endif()

    if(NOT INSTALL_BINDIR)
        set(INSTALL_BINDIR bin)
    endif()

    if(NOT INSTALL_PLUGINSDIR)
        set(INSTALL_PLUGINSDIR "plugins")
    endif()

    set(install_prefixes "")
    if(NOT CMAKE_INSTALL_PREFIX_INITIALIZED_TO_DEFAULT)
        set(install_prefixes "${CMAKE_INSTALL_PREFIX}")
    endif()

    # If part of Qt build or standalone tests, use the build internals install prefix.
    # If the tests are configured as a separate project, use the Qt6 package provided install
    # prefix.
    if(QT_BUILD_INTERNALS_RELOCATABLE_INSTALL_PREFIX)
        list(APPEND install_prefixes "${QT_BUILD_INTERNALS_RELOCATABLE_INSTALL_PREFIX}")
    else()
        list(APPEND install_prefixes "${QT6_INSTALL_PREFIX}")
    endif()

    set(test_env_path "PATH=${CMAKE_CURRENT_BINARY_DIR}")
    foreach(install_prefix ${install_prefixes})
        set(test_env_path "${test_env_path}${QT_PATH_SEPARATOR}${install_prefix}/${INSTALL_BINDIR}")
    endforeach()
    set(test_env_path "${test_env_path}${QT_PATH_SEPARATOR}$ENV{PATH}")
    string(REPLACE ";" "\;" test_env_path "${test_env_path}")
    set_property(TEST "${testname}" APPEND PROPERTY ENVIRONMENT "${test_env_path}")
    set_property(TEST "${testname}" APPEND PROPERTY ENVIRONMENT "QT_TEST_RUNNING_IN_CTEST=1")

    if(NOT arg_NO_PLUGIN_PATH)
        # Add the install prefix to list of plugin paths when doing a prefix build
        if(NOT QT_INSTALL_DIR)
            foreach(install_prefix ${install_prefixes})
                list(APPEND plugin_paths "${install_prefix}/${INSTALL_PLUGINSDIR}")
            endforeach()
        endif()

        # TODO: Collect all paths from known repositories when performing a super build.
        list(APPEND plugin_paths "${PROJECT_BINARY_DIR}/${INSTALL_PLUGINSDIR}")
        list(JOIN plugin_paths "${QT_PATH_SEPARATOR}" plugin_paths_joined)
        set_property(TEST "${testname}"
            APPEND PROPERTY ENVIRONMENT "QT_PLUGIN_PATH=${plugin_paths_joined}")
    endif()
endfunction()

# Checks if the test project can be built successfully. Arguments:
#
# NO_CLEAN_STEP: Skips calling 'clean' target before building.
#
# NO_BUILD_PROJECT_ARG: Skips adding --build-project argument. Useful when using Xcode generator.
#
# GENERATOR: Use a custom generator. When not specified, uses existing CMAKE_GENERATOR value.
#
# NO_IOS_DEFAULT_ARGS: Skips setting default iOS-specific options like the generator to be used.
#
# MAKE_PROGRAM: Specify a different make program. Can be useful with a custom make or ninja wrapper.
#
# BUILD_TYPE: Specify a different CMake build type. Defaults to CMAKE_BUILD_TYPE if it is not empty.
#             Which means no build type is passed if the top-level project is configured with a
#             multi-config generator.
#
# SIMULATE_IN_SOURCE: If the option is specified, the function copies sources of the tests to the
#                     CMAKE_CURRENT_BINARY_DIR directory, creates internal build directory in the
#                     copied sources and uses this directory to build and test the project.
#                     This makes possible to have relative paths to the source files in the
#                     generated ninja rules.
#
# BUILD_DIR: A custom build dir relative to the calling project CMAKE_CURRENT_BINARY_DIR.
#            Useful when configuring the same test project with different options in separate
#            build dirs.
#
# BINARY: Path to the test artifact that will be executed after the build is complete. If a
#         relative path is specified, it will be counted from the build directory.
#         Can also be passed a random executable to be found in PATH, like 'ctest'.
#
# BINARY_ARGS: Additional arguments to pass to the BINARY.
#
# TESTNAME: a custom test name to use instead of the one derived from the source directory name
#
# BUILD_OPTIONS: a list of -D style CMake definitions to pass to ctest's --build-options (which
#                are ultimately passed to the CMake invocation of the test project). You may
#                escape semicolons inside the definitions using:
#                https://cmake.org/cmake/help/latest/manual/cmake-language.7.html#bracket-argument
#                so the argument containing list will look as following:
#                    -DLIST_ARGUMENT=item1[[;]]item2[[;]]...itemN.
macro(_qt_internal_test_expect_pass _dir)
    if(WASM)
        return()
    endif()
    set(_test_option_args
      SIMULATE_IN_SOURCE
      NO_CLEAN_STEP
      NO_BUILD_PROJECT_ARG
      NO_IOS_DEFAULT_ARGS
      NO_RUN_ENVIRONMENT_PLUGIN_PATH
    )
    set(_test_single_args
      BINARY
      TESTNAME
      BUILD_DIR
      GENERATOR
      MAKE_PROGRAM
      BUILD_TYPE
    )
    set(_test_multi_args
      BUILD_OPTIONS
      BINARY_ARGS
    )
    cmake_parse_arguments(_ARGS
      "${_test_option_args}"
      "${_test_single_args}"
      "${_test_multi_args}"
      ${ARGN}
    )

    if(NOT _ARGS_NO_IOS_DEFAULT_ARGS AND IOS)
        set(_ARGS_NO_BUILD_PROJECT_ARG TRUE)
        set(_ARGS_GENERATOR Xcode)
        set(_ARGS_MAKE_PROGRAM xcodebuild)
    endif()

    if(_ARGS_TESTNAME)
      set(testname "${_ARGS_TESTNAME}")
    else()
      string(REPLACE "(" "_" testname "${_dir}")
      string(REPLACE ")" "_" testname "${testname}")
      string(REPLACE "/" "_" testname "${testname}")
    endif()

    # Allow setting a different generator. Needed for iOS.
    set(generator "${CMAKE_GENERATOR}")
    if(_ARGS_GENERATOR)
        set(generator "${_ARGS_GENERATOR}")
    endif()

    # Allow setting a different make program.
    if(_ARGS_MAKE_PROGRAM)
        set(make_program "${_ARGS_MAKE_PROGRAM}")
    elseif(CMAKE_GENERATOR MATCHES "Ninja")
        # Use a ninja wrapper when generator is ninja
        _qt_internal_get_ninja_wrapper("${CMAKE_MAKE_PROGRAM}" ninja_wrapper)
        set(make_program "${ninja_wrapper}")
    else()
        set(make_program "${CMAKE_MAKE_PROGRAM}")
    endif()

    # Only pass build config if it was specified during the initial tests/auto project
    # configuration. Important when using Qt multi-config builds which won't have CMAKE_BUILD_TYPE
    # set.
    set(build_type "")

    if(_ARGS_BUILD_TYPE)
        set(build_type "${_ARGS_BUILD_TYPE}")
    elseif(CMAKE_BUILD_TYPE)
        set(build_type "${CMAKE_BUILD_TYPE}")
    endif()
    if(build_type)
        set(build_type "--build-config" "${build_type}")
    endif()

    # Allow skipping clean step.
    set(build_no_clean "")
    if(_ARGS_NO_CLEAN_STEP)
        set(build_no_clean "--build-noclean")
    endif()

    # Allow omitting the --build-project arg. It's relevant for xcode projects where the project
    # name on disk is different from the project source dir name.
    if(NOT _ARGS_NO_BUILD_PROJECT_ARG)
        set(build_project "--build-project" "${_dir}")
    else()
        set(build_project)
    endif()

    # Allow omitting test command if no binary or binary args are provided.
    set(test_command "")
    if(_ARGS_BINARY)
        list(APPEND test_command ${_ARGS_BINARY} ${_ARGS_BINARY_ARGS})
    endif()
    if(test_command)
        set(test_command "--test-command" ${test_command})
    endif()

    set(additional_configure_args "")

    # Allow passing additional configure options to all projects via either a cache var or env var.
    # Can be useful for certain catch-all scenarios.
    if(QT_CMAKE_TESTS_ADDITIONAL_CONFIGURE_OPTIONS)
        list(APPEND additional_configure_args ${QT_CMAKE_TESTS_ADDITIONAL_CONFIGURE_OPTIONS})
    endif()
    if(DEFINED ENV{QT_CMAKE_TESTS_ADDITIONAL_CONFIGURE_OPTIONS})
        list(APPEND additional_configure_args $ENV{QT_CMAKE_TESTS_ADDITIONAL_CONFIGURE_OPTIONS})
    endif()

    # When building an iOS CMake test in the CI using a universal Qt build, target the simulator
    # sdk, because the CI currently doesn't have a proper setup for signing device binaries
    # (missing a working signing certificate and provisioning profile). Allow opt-out.
    if(IOS)
        set(osx_arch_count 0)
        if(QT_OSX_ARCHITECTURES)
            list(LENGTH QT_OSX_ARCHITECTURES osx_arch_count)
        endif()

        set(build_environment "")
        if(DEFINED ENV{QT_BUILD_ENVIRONMENT})
            set(build_environment "$ENV{QT_BUILD_ENVIRONMENT}")
        endif()
        if(build_environment STREQUAL "ci"
            AND osx_arch_count GREATER_EQUAL 2
            AND NOT QT_APPLE_SDK
            AND NOT QT_NO_IOS_BUILD_ADJUSTMENT_IN_CI)
            list(APPEND additional_configure_args
                -DCMAKE_OSX_ARCHITECTURES=x86_64 -DCMAKE_OSX_SYSROOT=iphonesimulator)
        endif()
    endif()

    set(__expect_pass_build_dir "${CMAKE_CURRENT_BINARY_DIR}/${_dir}")
    if(_ARGS_BUILD_DIR)
        set(__expect_pass_build_dir "${CMAKE_CURRENT_BINARY_DIR}/${_ARGS_BUILD_DIR}")
    endif()

    set(__expect_pass_source_dir "${CMAKE_CURRENT_SOURCE_DIR}/${_dir}")
    if(_ARGS_SIMULATE_IN_SOURCE)
        set(__expect_pass_in_source_build_dir "${CMAKE_CURRENT_BINARY_DIR}/in_source")
        set(__expect_pass_build_dir "${__expect_pass_in_source_build_dir}/${_dir}/build")
        set(__expect_pass_source_dir "${__expect_pass_in_source_build_dir}/${_dir}")

        unset(__expect_pass_in_source_build_dir)
    endif()

    if(_ARGS_BINARY AND NOT IS_ABSOLUTE "${_ARGS_BINARY}")
        set(_ARGS_BINARY "${__expect_pass_build_dir}/${_ARGS_BINARY}")
    endif()

    if(_ARGS_SIMULATE_IN_SOURCE)
      add_test(NAME ${testname}_cleanup
        COMMAND ${CMAKE_COMMAND} -E remove_directory "${__expect_pass_source_dir}"
      )
      set_tests_properties(${testname}_cleanup PROPERTIES
          FIXTURES_SETUP "${testname}SIMULATE_IN_SOURCE_FIXTURE"
      )
      add_test(${testname}_copy_sources ${CMAKE_COMMAND} -E copy_directory
          "${CMAKE_CURRENT_SOURCE_DIR}/${_dir}" "${__expect_pass_source_dir}"
      )
      set_tests_properties(${testname}_copy_sources PROPERTIES
          FIXTURES_SETUP "${testname}SIMULATE_IN_SOURCE_FIXTURE"
          DEPENDS ${testname}_cleanup
      )
    endif()

    string(REPLACE "[[;]]" "\;" _ARGS_BUILD_OPTIONS "${_ARGS_BUILD_OPTIONS}")

    _qt_internal_get_cmake_test_configure_options(option_list)
    set(ctest_command_args
        --build-and-test
        "${__expect_pass_source_dir}"
        "${__expect_pass_build_dir}"
        ${build_type}
        ${build_no_clean}
        --build-generator "${generator}"
        --build-makeprogram "${make_program}"
        ${build_project}
        --build-options "${option_list}"
                        "${_ARGS_BUILD_OPTIONS}" ${additional_configure_args}
        ${test_command}
    )

    set(wrapper_file "${CMAKE_CURRENT_BINARY_DIR}/build_and_test_${testname}.cmake")
    _qt_internal_create_command_script(
      COMMAND ${CMAKE_CTEST_COMMAND} ${ctest_command_args}
      COMMAND_ECHO STDOUT
      OUTPUT_FILE "${wrapper_file}"
      PRE_RUN ${_qt_internal_skip_build_test_pre_run}
    )

    add_test(${testname} "${CMAKE_COMMAND}" "-P" "${wrapper_file}")
    set_tests_properties(${testname} PROPERTIES
        SKIP_REGULAR_EXPRESSION "${_qt_internal_skip_build_test_regex}")

    if(_ARGS_SIMULATE_IN_SOURCE)
      set_tests_properties(${testname} PROPERTIES
          FIXTURES_REQUIRED "${testname}SIMULATE_IN_SOURCE_FIXTURE"
      )
    endif()
    set_tests_properties(${testname} PROPERTIES ENVIRONMENT "ASAN_OPTIONS=detect_leaks=0")
    _qt_internal_make_check_target(${testname})

    if(_ARGS_BINARY)
        set(run_env_args "")
        if(_ARGS_NO_RUN_ENVIRONMENT_PLUGIN_PATH)
            list(APPEND run_env_args NO_PLUGIN_PATH)
        endif()
        _qt_internal_set_up_test_run_environment("${testname}" ${run_env_args})
    endif()

    unset(__expect_pass_source_dir)
    unset(__expect_pass_build_dir)
endmacro()

# Checks if a qmake project can be built successfully. Arguments:
#
# TESTNAME: a custom test name to use instead of the one derived from the source directory name.
#           the name also applies to the generated build directory.
#
# QMAKE_OPTIONS: a list of variable assignments to pass to the qmake invocation.
#                e.g. CONFIG+=debug
#
# BUILD_ENVIRONMENT: a list of environment assignments to use when invoking the build tool
function(_qt_internal_add_qmake_test dir_name)
    set(test_option_args
    )
    set(test_single_args
      TESTNAME
    )
    set(test_multi_args
        QMAKE_OPTIONS
        BUILD_ENVIRONMENT
    )

    # PARSE_ARGV parsing keeps ';' in ENVIRONMENT variables
    cmake_parse_arguments(PARSE_ARGV 1 arg
        "${test_option_args}"
        "${test_single_args}"
        "${test_multi_args}"
    )

    if(arg_TESTNAME)
        set(testname "${arg_TESTNAME}")
    else()
        string(REGEX REPLACE "[/)(]" "_" testname "${dir_name}")
    endif()

    set(source_dir "${CMAKE_CURRENT_SOURCE_DIR}/${dir_name}")
    if(arg_TESTNAME)
        set(build_dir "${CMAKE_CURRENT_BINARY_DIR}/${arg_TESTNAME}")
    else()
        set(build_dir "${CMAKE_CURRENT_BINARY_DIR}/${dir_name}")
    endif()

    # Find the qmake binary or the wrapper qmake script when cross-compiling..
    if(QtBase_BINARY_DIR AND NOT QT_BUILD_STANDALONE_TESTS)
        set(qmake_dir "${QtBase_BINARY_DIR}/${INSTALL_BINDIR}")
    else()
        set(qmake_dir "${QT6_INSTALL_PREFIX}/${QT6_INSTALL_BINS}")
    endif()

    set(qmake_path "${qmake_dir}/qmake${CMAKE_EXECUTABLE_SUFFIX}")

    set(qmake_args
        "${source_dir}"
        ${arg_QMAKE_OPTIONS}
    )

    # Try to choose an appropriate build tool.
    if(ENV{QT_QMAKE_TEST_BUILD_TOOL})
        set(build_tool "$ENV{QT_QMAKE_TEST_BUILD_TOOL}")
    elseif(MSVC)
        set(build_tool "nmake")
    elseif(MINGW)
        set(build_tool "mingw32-make")
    else()
        set(build_tool "make")
    endif()

    set(build_tool_args "")
    if(ENV{QT_QMAKE_TEST_BUILD_TOOL_OPTIONS})
        set(build_tool_args "$ENV{QT_QMAKE_TEST_BUILD_TOOL_OPTIONS}")
    endif()

    # Remove any stale build dir, and create a new one on each test rerun.
    add_test(${testname}_remove_build_dir
        ${CMAKE_COMMAND} -E remove_directory "${build_dir}"
    )
    set_tests_properties(${testname}_remove_build_dir PROPERTIES
        FIXTURES_SETUP "${testname}_ensure_clean_build_dir"
    )

    add_test(${testname}_create_build_dir
        ${CMAKE_COMMAND} -E make_directory "${build_dir}"
    )
    set_tests_properties(${testname}_create_build_dir PROPERTIES
        FIXTURES_SETUP "${testname}_ensure_clean_build_dir"
    )

    set_tests_properties(${testname}_create_build_dir
                         PROPERTIES DEPENDS ${testname}_remove_build_dir)

    # Add test to call qmake.
    #
    # We can't use the add_test(NAME) signature to set a working directory, because that breaks
    # when calling ctest without a -C <config> using multi-config generators, and the CI calls
    # ctest without -C, and we use Xcode when configuring tests for iOS, which is multi-config.
    # The plain add_test signature does not have this issue.
    # Work around this by using a wrapper script that sets a working directory and use the plain
    # signature.
    # Somewhat related issue https://gitlab.kitware.com/cmake/cmake/-/issues/20283
    set(qmake_wrapper_file "${CMAKE_CURRENT_BINARY_DIR}/run_qmake_${testname}.cmake")
    _qt_internal_create_command_script(
        COMMAND "${qmake_path}" ${qmake_args}
        COMMAND_ECHO STDOUT
        OUTPUT_FILE "${qmake_wrapper_file}"
        WORKING_DIRECTORY "${build_dir}"
        PRE_RUN ${_qt_internal_skip_build_test_pre_run}
    )

    add_test(${testname}_qmake "${CMAKE_COMMAND}" "-P" "${qmake_wrapper_file}")
    set_tests_properties(${testname}_qmake PROPERTIES
        SKIP_REGULAR_EXPRESSION "${_qt_internal_skip_build_test_regex}")

    set_tests_properties(${testname}_qmake PROPERTIES
        DEPENDS ${testname}_create_build_dir
        FIXTURES_REQUIRED "${testname}_ensure_clean_build_dir"
        FIXTURES_SETUP "${testname}_configure_project"
    )

    # Add test to build the generated qmake project.
    set(build_tool_wrapper_file "${CMAKE_CURRENT_BINARY_DIR}/run_build_${testname}.cmake")
    _qt_internal_create_command_script(
        COMMAND "${build_tool}" ${build_tool_args}
        COMMAND_ECHO STDOUT
        OUTPUT_FILE "${build_tool_wrapper_file}"
        WORKING_DIRECTORY "${build_dir}"
        ENVIRONMENT ${arg_BUILD_ENVIRONMENT}
        PRE_RUN ${_qt_internal_skip_build_test_pre_run}
    )

    add_test(${testname} "${CMAKE_COMMAND}" "-P" "${build_tool_wrapper_file}")
    set_tests_properties(${testname} PROPERTIES
        SKIP_REGULAR_EXPRESSION "${_qt_internal_skip_build_test_regex}")

    set_tests_properties(${testname} PROPERTIES
        DEPENDS ${testname}_qmake
        FIXTURES_REQUIRED "${testname}_ensure_clean_build_dir;${testname}_configure_project"
    )
endfunction()

# Checks if the build of the test project fails.
# This test passes if the test project fails either at the
# configuring or build steps.
# Arguments: See _qt_internal_test_expect_pass
macro(_qt_internal_test_expect_fail)
  _qt_internal_test_expect_pass(${ARGV})
  set_tests_properties(${testname} PROPERTIES WILL_FAIL TRUE)
endmacro()

# Checks if the build of the test project fails.
# This test passes only if the test project fails at the build step,
# but not at the configuring step.
macro(_qt_internal_test_expect_build_fail _dir)
  string(REPLACE "(" "_" testname "${_dir}")
  string(REPLACE ")" "_" testname "${testname}")
  file(MAKE_DIRECTORY "${CMAKE_CURRENT_BINARY_DIR}/failbuild/${_dir}")
  file(COPY "${CMAKE_CURRENT_SOURCE_DIR}/${_dir}" DESTINATION "${CMAKE_CURRENT_BINARY_DIR}/failbuild/${_dir}")

  set(__expect_fail_prefixes "")
  _qt_internal_get_cmake_test_configure_options(option_list OUT_PREFIX_PATH __expect_fail_prefixes)

  file(WRITE "${CMAKE_CURRENT_BINARY_DIR}/failbuild/${_dir}/${_dir}/FindPackageHints.cmake"
      "set(Qt6Tests_PREFIX_PATH \"${__expect_fail_prefixes}\")
list(APPEND CMAKE_PREFIX_PATH \"${__expect_fail_prefixes}\")
")

  file(WRITE "${CMAKE_CURRENT_BINARY_DIR}/failbuild/${_dir}/CMakeLists.txt"
    "
      cmake_minimum_required(VERSION 3.16)
      project(${_dir})

      try_compile(Result \${CMAKE_CURRENT_BINARY_DIR}/${_dir}
          \${CMAKE_CURRENT_SOURCE_DIR}/${_dir}
          ${_dir}
          OUTPUT_VARIABLE Out
      )
      message(\"\${Out}\")
      if (Result)
        message(SEND_ERROR \"Succeeded build which should fail\")
      endif()
      "
  )


  if(CMAKE_GENERATOR MATCHES "Ninja")
      # Use a ninja wrapper when generator is ninja
      _qt_internal_get_ninja_wrapper("${CMAKE_MAKE_PROGRAM}" ninja_wrapper)
      set(make_program "${ninja_wrapper}")
  else()
      set(make_program "${CMAKE_MAKE_PROGRAM}")
  endif()

  set(wrapper_file "${CMAKE_CURRENT_BINARY_DIR}/build_and_test_${testname}.cmake")
  _qt_internal_create_command_script(
      COMMAND ${CMAKE_CTEST_COMMAND}
          --build-and-test
          "${CMAKE_CURRENT_BINARY_DIR}/failbuild/${_dir}"
          "${CMAKE_CURRENT_BINARY_DIR}/failbuild/${_dir}/build"
          --build-config "${CMAKE_BUILD_TYPE}"
          --build-generator "${CMAKE_GENERATOR}"
          --build-makeprogram "${make_program}"
          --build-project "${_dir}"
          --build-options ${option_list}
      COMMAND_ECHO STDOUT
      OUTPUT_FILE "${wrapper_file}"
      PRE_RUN ${_qt_internal_skip_build_test_pre_run}
  )

  add_test(${testname} "${CMAKE_COMMAND}" "-P" "${wrapper_file}")
  set_tests_properties(${testname} PROPERTIES
        SKIP_REGULAR_EXPRESSION "${_qt_internal_skip_build_test_regex}")
  _qt_internal_make_check_target(${testname})

  unset(__expect_fail_prefixes)
endmacro()

function(_qt_internal_test_module_includes)

  set(all_args ${ARGN})
  set(packages_string "")
  set(libraries_string "")

  foreach(_package ${Qt6_MODULE_TEST_DEPENDS})
    set(packages_string
      "
      ${packages_string}
      find_package(Qt6${_package} 6.0.0 REQUIRED)
      "
    )
  endforeach()

  while(all_args)
    list(GET all_args 0 qtmodule)
    list(REMOVE_AT all_args 0 1)

    set(CMAKE_MODULE_VERSION ${CMAKE_${qtmodule}_MODULE_MAJOR_VERSION}.${CMAKE_${qtmodule}_MODULE_MINOR_VERSION}.${CMAKE_${qtmodule}_MODULE_PATCH_VERSION} )

    set(packages_string
      "${packages_string}
      find_package(Qt6${qtmodule} 6.0.0 REQUIRED)\n")

    list(FIND CMAKE_MODULES_UNDER_TEST ${qtmodule} _findIndex)
    if (NOT _findIndex STREQUAL -1)
        set(packages_string
          "${packages_string}
          if(NOT \"\${Qt6${qtmodule}_VERSION}\" VERSION_EQUAL ${CMAKE_MODULE_VERSION})
            message(SEND_ERROR \"Qt6${qtmodule}_VERSION variable was not ${CMAKE_MODULE_VERSION}. Got \${Qt6${qtmodule}_VERSION} instead.\")
          endif()
          if(NOT \"\${Qt6${qtmodule}_VERSION_MAJOR}\" VERSION_EQUAL ${CMAKE_${qtmodule}_MODULE_MAJOR_VERSION})
            message(SEND_ERROR \"Qt6${qtmodule}_VERSION_MAJOR variable was not ${CMAKE_${qtmodule}_MODULE_MAJOR_VERSION}. Got \${Qt6${qtmodule}_VERSION_MAJOR} instead.\")
          endif()
          if(NOT \"\${Qt6${qtmodule}_VERSION_MINOR}\" VERSION_EQUAL ${CMAKE_${qtmodule}_MODULE_MINOR_VERSION})
            message(SEND_ERROR \"Qt6${qtmodule}_VERSION_MINOR variable was not ${CMAKE_${qtmodule}_MODULE_MINOR_VERSION}. Got \${Qt6${qtmodule}_VERSION_MINOR} instead.\")
          endif()
          if(NOT \"\${Qt6${qtmodule}_VERSION_PATCH}\" VERSION_EQUAL ${CMAKE_${qtmodule}_MODULE_PATCH_VERSION})
            message(SEND_ERROR \"Qt6${qtmodule}_VERSION_PATCH variable was not ${CMAKE_${qtmodule}_MODULE_PATCH_VERSION}. Got \${Qt6${qtmodule}_VERSION_PATCH} instead.\")
          endif()\n"
        )
    endif()
    set(libraries_string "${libraries_string} Qt6::${qtmodule}")
  endwhile()

  file(WRITE "${CMAKE_CURRENT_BINARY_DIR}/module_includes/CMakeLists.txt"
    "
      cmake_minimum_required(VERSION 3.16)
      project(module_includes)

      ${packages_string}

      add_executable(module_includes_exe \"\${CMAKE_CURRENT_SOURCE_DIR}/main.cpp\")
      target_link_libraries(module_includes_exe ${libraries_string})\n"
  )

  set(all_args ${ARGN})
  set(includes_string "")
  set(instances_string "")
  while(all_args)
    list(GET all_args 0 qtmodule)
    list(GET all_args 1 qtclass)
    if (${qtclass}_NAMESPACE)
      set(qtinstancetype ${${qtclass}_NAMESPACE}::${qtclass})
    else()
      set(qtinstancetype ${qtclass})
    endif()
    list(REMOVE_AT all_args 0 1)
    set(includes_string
      "${includes_string}
      #include <${qtclass}>
      #include <Qt${qtmodule}/${qtclass}>
      #include <Qt${qtmodule}>
      #include <Qt${qtmodule}/Qt${qtmodule}>"
    )
    set(instances_string
    "${instances_string}
    ${qtinstancetype} local${qtclass};
    ")
  endwhile()

  file(WRITE "${CMAKE_CURRENT_BINARY_DIR}/module_includes/main.cpp"
    "

    ${includes_string}

    int main(int, char **) { ${instances_string} return 0; }\n"
  )

  _qt_internal_get_cmake_test_configure_options(option_list)

  if(CMAKE_GENERATOR MATCHES "Ninja")
      # Use a ninja wrapper when generator is ninja
      _qt_internal_get_ninja_wrapper("${CMAKE_MAKE_PROGRAM}" ninja_wrapper)
      set(make_program "${ninja_wrapper}")
  else()
      set(make_program "${CMAKE_MAKE_PROGRAM}")
  endif()

  set(wrapper_file "${CMAKE_CURRENT_BINARY_DIR}/build_and_test_module_includes.cmake")
  _qt_internal_create_command_script(
    COMMAND ${CMAKE_CTEST_COMMAND}
      --build-and-test
      "${CMAKE_CURRENT_BINARY_DIR}/module_includes/"
      "${CMAKE_CURRENT_BINARY_DIR}/module_includes/build"
      --build-config "${CMAKE_BUILD_TYPE}"
      --build-generator "${CMAKE_GENERATOR}"
      --build-makeprogram "${make_program}"
      --build-project module_includes
      --build-options ${option_list}
    COMMAND_ECHO STDOUT
    OUTPUT_FILE "${wrapper_file}"
    PRE_RUN ${_qt_internal_skip_build_test_pre_run}
  )

  add_test(module_includes "${CMAKE_COMMAND}" "-P" "${wrapper_file}")
  set_tests_properties(module_includes PROPERTIES
      SKIP_REGULAR_EXPRESSION "${_qt_internal_skip_build_test_regex}")
  # We need a unique name for the targets
  # TODO: CTest name clash would make multiple tests be run as long as they are
  #  defined in nested folders
  string(TOLOWER "${PROJECT_NAME}" project_name_lower)
  _qt_internal_make_check_target(${project_name_lower}_module_includes
      CTEST_TEST_NAME module_includes
  )
endfunction()