Send MIDI poly pressure Cycling '74 Max MIDI Key Pressure TEXT_HERE Key Number TEXT_HERE MIDI Channel TEXT_HERE MIDI port ID Specifies the port for transmitting MIDI program change messages. When a letter argument is present, channel numbers greater than 16 received in the right inlet will be wrapped around to stay within the 1-16 range. If there is no argument, polyout initially transmits out port a, on MIDI channel 1. MIDI port and channel A letter and number combination (separated by a space) indicates a port and a specific MIDI channel on which to transmit program change messages. Channel numbers greater than 16 will be wrapped around to stay within the 1-16 range. MIDI output device The name of a MIDI output device may be used as the first argument to specify the port. The name 'none' can be used to prevent the object from transmitting MIDI messages on any port. Extended MIDI channel A number alone can be used in place of a letter and number combination. The exact meaning of the channel number argument depends on the channel offset specified for each port in the MIDI Setup dialog. Send MIDI poly pressure In left inlet: The number has 1 subtracted from it and then is transmitted as a poly pressure value on the specified channel and port. Numbers are limited between 1 and 128, and are sent out as poly pressure values of 0 to 127. Function depends on inlet Converted to int. Set the MIDI output device Performs the same function as port but without need for the word, "port". Select a MIDI output device Double-clicking on a polyout object shows a pop-up menu for choosing a MIDI port or device. Set key value In middle inlet: The number is stored as the key number, to be used with pressure values received in the left inlet. Numbers are limited between 0 and 127. Set MIDI channel In right inlet: The number is stored as the channel number on which to transmit the program change messages. Set the MIDI output device The word port, followed by a letter a- z or the name of a MIDI output port or device, specifies the port used to transmit the MIDI messages. The word port is optional and may be omitted. The name 'none' can be used to prevent the object from transmitting MIDI messages on any port. Set all values with a list In left inlet: The first number is the pressure value, the second number is the key number, and the third number is the channel, of a transmitted MIDI polyphonic key pressure message. Enable MIDI for exact port match only If the port argument doesn't match an existing port or device name, set the object's MIDI port to 'none'. Port Name Set the object's MIDI port based on a device name. The attribute will attempt to do a case-sensitive partial string match based on the attribute's value. There are no outlets. The output is a MIDI polyphonic key pressure message transmitted directly to the object's MIDI output port.