Transmit MIDI note messages Transmits note-on and note-off messages to a MIDI device. Cycling '74 Max MIDI Pitch TEXT_HERE Velocity (0 for Note-off) TEXT_HERE MIDI Channel TEXT_HERE MIDI port ID Specifies the port (a-z) for transmitting MIDI note messages. Channel numbers greater than 16 received in the right inlet will be wrapped around to stay within the 1-16 range. If there is no argument, noteout initially transmits out port a, on MIDI channel 1. MIDI port and channel A letter and number combination (separated by a space) indicates a port and a specific MIDI channel on which to transmit note messages. Channel numbers greater than 16 will be wrapped around to stay within the 1-16 range. MIDI output device The name of a MIDI output device may be used as the first argument to specify the port. The name 'none' can be used to prevent the object from transmitting MIDI messages on any port. Extended MIDI channel A number alone can be used in place of a letter and number combination. The exact meaning of the channel number argument depends on the channel offset specified for each port in the MIDI Setup dialog. Store pitch and cause output In left inlet: The number is the pitch value of a MIDI note message transmitted on the specified channel and port. Numbers are limited between 0 and 127. Function depends on inlet Converted to int. Set the MIDI output device Performs the same function as port but without need for the word, "port". Select a MIDI output device Double-clicking on a noteout object shows a pop-up menu for choosing a MIDI port or device. Store velocity value In middle inlet: The number is stored as the velocity of a note message, to be used with pitch values received in the left inlet. Numbers are limited between 0 and 127. 0 is considered a note-off message, 1-127 are note-on messages. Store the MIDI channel for output In right inlet: The number is stored as the channel number on which to transmit the note-on messages. Set the MIDI output device In left inlet: The word port, followed by a letter a-z or the name of a MIDI output port or device, specifies the port used to transmit the MIDI messages. The word port is optional and may be omitted. The name 'none' can be used to prevent the object from transmitting MIDI messages on any port. Enable MIDI for exact port match only If the port argument doesn't match an existing port or device name, set the object's MIDI port to 'none'. Port Name Set the object's MIDI port based on a device name. The attribute will attempt to do a case-sensitive partial string match based on the attribute's value. There are no outlets. The output is a MIDI note-on message transmitted directly to the object's MIDI output port.